isci: kill sci_phy_protocol and sci_request_protocol

Holdovers from the initial driver cleanup, replace with enum sas_protocol.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>

6 files changed, 21 insertions, 37 deletions

diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 3822ffb..83886a2 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1911,7 +1911,7 @@ static void power_control_timeout(unsigned long data)
 		ihost->power_control.phys_granted_power++;
 		sci_phy_consume_power_handler(iphy);
 
-		if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
+		if (iphy->protocol == SAS_PROTOCOL_SSP) {
 			u8 j;
 
 			for (j = 0; j < SCI_MAX_PHYS; j++) {
@@ -1985,7 +1985,7 @@ void sci_controller_power_control_queue_insert(struct isci_host *ihost,
 				       sizeof(current_phy->frame_rcvd.iaf.sas_addr));
 
 			if (current_phy->sm.current_state_id == SCI_PHY_READY &&
-			    current_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS &&
+			    current_phy->protocol == SAS_PROTOCOL_SSP &&
 			    other == 0) {
 				sci_phy_consume_power_handler(iphy);
 				break;
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index fab3586..c685ab0 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -580,7 +580,7 @@ static void sci_phy_start_sas_link_training(struct isci_phy *iphy)
 
 	sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SAS_SPEED_EN);
 
-	iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS;
+	iphy->protocol = SAS_PROTOCOL_SSP;
 }
 
 static void sci_phy_start_sata_link_training(struct isci_phy *iphy)
@@ -591,7 +591,7 @@ static void sci_phy_start_sata_link_training(struct isci_phy *iphy)
 	 */
 	sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_POWER);
 
-	iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;
+	iphy->protocol = SAS_PROTOCOL_SATA;
 }
 
 /**
@@ -797,7 +797,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code)
 			 */
 			break;
 		case SCU_EVENT_SATA_PHY_DETECTED:
-			iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;
+			iphy->protocol = SAS_PROTOCOL_SATA;
 
 			/* We have received the SATA PHY notification change state */
 			sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN);
@@ -1215,7 +1215,7 @@ static void sci_phy_starting_state_enter(struct sci_base_state_machine *sm)
 	scu_link_layer_start_oob(iphy);
 
 	/* We don't know what kind of phy we are going to be just yet */
-	iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
+	iphy->protocol = SAS_PROTOCOL_NONE;
 	iphy->bcn_received_while_port_unassigned = false;
 
 	if (iphy->sm.previous_state_id == SCI_PHY_READY)
@@ -1250,7 +1250,7 @@ static void sci_phy_resetting_state_enter(struct sci_base_state_machine *sm)
 	 */
 	sci_port_deactivate_phy(iphy->owning_port, iphy, false);
 
-	if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
+	if (iphy->protocol == SAS_PROTOCOL_SSP) {
 		scu_link_layer_tx_hard_reset(iphy);
 	} else {
 		/* The SCU does not need to have a discrete reset state so
@@ -1316,7 +1316,7 @@ void sci_phy_construct(struct isci_phy *iphy,
 	iphy->owning_port = iport;
 	iphy->phy_index = phy_index;
 	iphy->bcn_received_while_port_unassigned = false;
-	iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
+	iphy->protocol = SAS_PROTOCOL_NONE;
 	iphy->link_layer_registers = NULL;
 	iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
 
diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h
index 0e45833..45fecfa 100644
--- a/drivers/scsi/isci/phy.h
+++ b/drivers/scsi/isci/phy.h
@@ -76,13 +76,6 @@
  */
 #define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT  250
 
-enum sci_phy_protocol {
-	SCIC_SDS_PHY_PROTOCOL_UNKNOWN,
-	SCIC_SDS_PHY_PROTOCOL_SAS,
-	SCIC_SDS_PHY_PROTOCOL_SATA,
-	SCIC_SDS_MAX_PHY_PROTOCOLS
-};
-
 /**
  * isci_phy - hba local phy infrastructure
  * @sm:
@@ -95,7 +88,7 @@ struct isci_phy {
 	struct sci_base_state_machine sm;
 	struct isci_port *owning_port;
 	enum sas_linkrate max_negotiated_speed;
-	enum sci_phy_protocol protocol;
+	enum sas_protocol protocol;
 	u8 phy_index;
 	bool bcn_received_while_port_unassigned;
 	bool is_in_link_training;
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 5fada73..923579f 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -184,7 +184,7 @@ static void isci_port_link_up(struct isci_host *isci_host,
 
 	sci_port_get_properties(iport, &properties);
 
-	if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) {
+	if (iphy->protocol == SAS_PROTOCOL_SATA) {
 		u64 attached_sas_address;
 
 		iphy->sas_phy.oob_mode = SATA_OOB_MODE;
@@ -204,7 +204,7 @@ static void isci_port_link_up(struct isci_host *isci_host,
 
 		memcpy(&iphy->sas_phy.attached_sas_addr,
 		       &attached_sas_address, sizeof(attached_sas_address));
-	} else if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
+	} else if (iphy->protocol == SAS_PROTOCOL_SSP) {
 		iphy->sas_phy.oob_mode = SAS_OOB_MODE;
 		iphy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame);
 
@@ -517,7 +517,7 @@ void sci_port_get_attached_sas_address(struct isci_port *iport, struct sci_sas_a
 	 */
 	iphy = sci_port_get_a_connected_phy(iport);
 	if (iphy) {
-		if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) {
+		if (iphy->protocol != SAS_PROTOCOL_SATA) {
 			sci_phy_get_attached_sas_address(iphy, sas);
 		} else {
 			sci_phy_get_sas_address(iphy, sas);
@@ -624,7 +624,7 @@ static void sci_port_activate_phy(struct isci_port *iport,
 {
 	struct isci_host *ihost = iport->owning_controller;
 
-	if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA && (flags & PF_RESUME))
+	if (iphy->protocol != SAS_PROTOCOL_SATA && (flags & PF_RESUME))
 		sci_phy_resume(iphy);
 
 	iport->active_phy_mask |= 1 << iphy->phy_index;
@@ -751,12 +751,10 @@ static bool sci_port_is_wide(struct isci_port *iport)
  * wide ports and direct attached phys.  Since there are no wide ported SATA
  * devices this could become an invalid port configuration.
  */
-bool sci_port_link_detected(
-	struct isci_port *iport,
-	struct isci_phy *iphy)
+bool sci_port_link_detected(struct isci_port *iport, struct isci_phy *iphy)
 {
 	if ((iport->logical_port_index != SCIC_SDS_DUMMY_PORT) &&
-	    (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA)) {
+	    (iphy->protocol == SAS_PROTOCOL_SATA)) {
 		if (sci_port_is_wide(iport)) {
 			sci_port_invalid_link_up(iport, iphy);
 			return false;
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 01844ef..835ede8 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -730,7 +730,7 @@ static enum sci_status sci_io_request_construct_basic_ssp(struct isci_request *i
 {
 	struct sas_task *task = isci_request_access_task(ireq);
 
-	ireq->protocol = SCIC_SSP_PROTOCOL;
+	ireq->protocol = SAS_PROTOCOL_SSP;
 
 	scu_ssp_io_request_construct_task_context(ireq,
 						  task->data_dir,
@@ -763,7 +763,7 @@ static enum sci_status sci_io_request_construct_basic_sata(struct isci_request *
 	bool copy = false;
 	struct sas_task *task = isci_request_access_task(ireq);
 
-	ireq->protocol = SCIC_STP_PROTOCOL;
+	ireq->protocol = SAS_PROTOCOL_STP;
 
 	copy = (task->data_dir == DMA_NONE) ? false : true;
 
@@ -1070,7 +1070,7 @@ request_started_state_tc_event(struct isci_request *ireq,
 	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS):
 	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR):
 	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR):
-		if (ireq->protocol == SCIC_STP_PROTOCOL) {
+		if (ireq->protocol == SAS_PROTOCOL_STP) {
 			ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
 					   SCU_COMPLETION_TL_STATUS_SHIFT;
 			ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED;
@@ -3169,7 +3169,7 @@ sci_general_request_construct(struct isci_host *ihost,
 	sci_init_sm(&ireq->sm, sci_request_state_table, SCI_REQ_INIT);
 
 	ireq->target_device = idev;
-	ireq->protocol = SCIC_NO_PROTOCOL;
+	ireq->protocol = SAS_PROTOCOL_NONE;
 	ireq->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX;
 
 	ireq->sci_status   = SCI_SUCCESS;
@@ -3310,7 +3310,7 @@ sci_io_request_construct_smp(struct device *dev,
 	if (!dma_map_sg(dev, sg, 1, DMA_TO_DEVICE))
 		return SCI_FAILURE;
 
-	ireq->protocol = SCIC_SMP_PROTOCOL;
+	ireq->protocol = SAS_PROTOCOL_SMP;
 
 	/* byte swap the smp request. */
 
diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h
index 057f237..4961f9f 100644
--- a/drivers/scsi/isci/request.h
+++ b/drivers/scsi/isci/request.h
@@ -77,13 +77,6 @@ enum isci_request_status {
 	dead        = 0x07
 };
 
-enum sci_request_protocol {
-	SCIC_NO_PROTOCOL,
-	SCIC_SMP_PROTOCOL,
-	SCIC_SSP_PROTOCOL,
-	SCIC_STP_PROTOCOL
-}; /* XXX remove me, use sas_task.{dev|task_proto} instead */;
-
 /**
  * isci_stp_request - extra request infrastructure to handle pio/atapi protocol
  * @pio_len - number of bytes requested at PIO setup
@@ -140,7 +133,7 @@ struct isci_request {
 	struct isci_host *owning_controller;
 	struct isci_remote_device *target_device;
 	u16 io_tag;
-	enum sci_request_protocol protocol;
+	enum sas_protocol protocol;
 	u32 scu_status; /* hardware result */
 	u32 sci_status; /* upper layer disposition */
 	u32 post_context;