summaryrefslogtreecommitdiff
path: root/drivers/serial/sunzilog.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 22:20:36 (GMT)
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 22:20:36 (GMT)
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/serial/sunzilog.c
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/serial/sunzilog.c')
-rw-r--r--drivers/serial/sunzilog.c1773
1 files changed, 1773 insertions, 0 deletions
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
new file mode 100644
index 0000000..5c4231a
--- /dev/null
+++ b/drivers/serial/sunzilog.c
@@ -0,0 +1,1773 @@
+/*
+ * sunzilog.c
+ *
+ * Driver for Zilog serial chips found on Sun workstations and
+ * servers. This driver could actually be made more generic.
+ *
+ * This is based on the old drivers/sbus/char/zs.c code. A lot
+ * of code has been simply moved over directly from there but
+ * much has been rewritten. Credits therefore go out to Eddie
+ * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their
+ * work there.
+ *
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/spinlock.h>
+#ifdef CONFIG_SERIO
+#include <linux/serio.h>
+#endif
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#ifdef CONFIG_SPARC64
+#include <asm/fhc.h>
+#endif
+#include <asm/sbus.h>
+
+#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#include "suncore.h"
+#include "sunzilog.h"
+
+/* On 32-bit sparcs we need to delay after register accesses
+ * to accommodate sun4 systems, but we do not need to flush writes.
+ * On 64-bit sparc we only need to flush single writes to ensure
+ * completion.
+ */
+#ifndef CONFIG_SPARC64
+#define ZSDELAY() udelay(5)
+#define ZSDELAY_LONG() udelay(20)
+#define ZS_WSYNC(channel) do { } while (0)
+#else
+#define ZSDELAY()
+#define ZSDELAY_LONG()
+#define ZS_WSYNC(__channel) \
+ sbus_readb(&((__channel)->control))
+#endif
+
+static int num_sunzilog;
+#define NUM_SUNZILOG num_sunzilog
+#define NUM_CHANNELS (NUM_SUNZILOG * 2)
+
+#define KEYBOARD_LINE 0x2
+#define MOUSE_LINE 0x3
+
+#define ZS_CLOCK 4915200 /* Zilog input clock rate. */
+#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct uart_sunzilog_port {
+ struct uart_port port;
+
+ /* IRQ servicing chain. */
+ struct uart_sunzilog_port *next;
+
+ /* Current values of Zilog write registers. */
+ unsigned char curregs[NUM_ZSREGS];
+
+ unsigned int flags;
+#define SUNZILOG_FLAG_CONS_KEYB 0x00000001
+#define SUNZILOG_FLAG_CONS_MOUSE 0x00000002
+#define SUNZILOG_FLAG_IS_CONS 0x00000004
+#define SUNZILOG_FLAG_IS_KGDB 0x00000008
+#define SUNZILOG_FLAG_MODEM_STATUS 0x00000010
+#define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020
+#define SUNZILOG_FLAG_REGS_HELD 0x00000040
+#define SUNZILOG_FLAG_TX_STOPPED 0x00000080
+#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100
+
+ unsigned int cflag;
+
+ unsigned char parity_mask;
+ unsigned char prev_status;
+
+#ifdef CONFIG_SERIO
+ struct serio *serio;
+ int serio_open;
+#endif
+};
+
+#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase))
+#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT))
+
+#define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB)
+#define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE)
+#define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS)
+#define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB)
+#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS)
+#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A)
+#define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD)
+#define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED)
+#define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE)
+
+/* Reading and writing Zilog8530 registers. The delays are to make this
+ * driver work on the Sun4 which needs a settling delay after each chip
+ * register access, other machines handle this in hardware via auxiliary
+ * flip-flops which implement the settle time we do in software.
+ *
+ * The port lock must be held and local IRQs must be disabled
+ * when {read,write}_zsreg is invoked.
+ */
+static unsigned char read_zsreg(struct zilog_channel __iomem *channel,
+ unsigned char reg)
+{
+ unsigned char retval;
+
+ sbus_writeb(reg, &channel->control);
+ ZSDELAY();
+ retval = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ return retval;
+}
+
+static void write_zsreg(struct zilog_channel __iomem *channel,
+ unsigned char reg, unsigned char value)
+{
+ sbus_writeb(reg, &channel->control);
+ ZSDELAY();
+ sbus_writeb(value, &channel->control);
+ ZSDELAY();
+}
+
+static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel)
+{
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ unsigned char regval;
+
+ regval = sbus_readb(&channel->control);
+ ZSDELAY();
+ if (regval & Rx_CH_AV)
+ break;
+
+ regval = read_zsreg(channel, R1);
+ sbus_readb(&channel->data);
+ ZSDELAY();
+
+ if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+ sbus_writeb(ERR_RES, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+ }
+ }
+}
+
+/* This function must only be called when the TX is not busy. The UART
+ * port lock must be held and local interrupts disabled.
+ */
+static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
+{
+ int i;
+
+ /* Let pending transmits finish. */
+ for (i = 0; i < 1000; i++) {
+ unsigned char stat = read_zsreg(channel, R1);
+ if (stat & ALL_SNT)
+ break;
+ udelay(100);
+ }
+
+ sbus_writeb(ERR_RES, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ sunzilog_clear_fifo(channel);
+
+ /* Disable all interrupts. */
+ write_zsreg(channel, R1,
+ regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
+
+ /* Set parity, sync config, stop bits, and clock divisor. */
+ write_zsreg(channel, R4, regs[R4]);
+
+ /* Set misc. TX/RX control bits. */
+ write_zsreg(channel, R10, regs[R10]);
+
+ /* Set TX/RX controls sans the enable bits. */
+ write_zsreg(channel, R3, regs[R3] & ~RxENAB);
+ write_zsreg(channel, R5, regs[R5] & ~TxENAB);
+
+ /* Synchronous mode config. */
+ write_zsreg(channel, R6, regs[R6]);
+ write_zsreg(channel, R7, regs[R7]);
+
+ /* Don't mess with the interrupt vector (R2, unused by us) and
+ * master interrupt control (R9). We make sure this is setup
+ * properly at probe time then never touch it again.
+ */
+
+ /* Disable baud generator. */
+ write_zsreg(channel, R14, regs[R14] & ~BRENAB);
+
+ /* Clock mode control. */
+ write_zsreg(channel, R11, regs[R11]);
+
+ /* Lower and upper byte of baud rate generator divisor. */
+ write_zsreg(channel, R12, regs[R12]);
+ write_zsreg(channel, R13, regs[R13]);
+
+ /* Now rewrite R14, with BRENAB (if set). */
+ write_zsreg(channel, R14, regs[R14]);
+
+ /* External status interrupt control. */
+ write_zsreg(channel, R15, regs[R15]);
+
+ /* Reset external status interrupts. */
+ write_zsreg(channel, R0, RES_EXT_INT);
+ write_zsreg(channel, R0, RES_EXT_INT);
+
+ /* Rewrite R3/R5, this time without enables masked. */
+ write_zsreg(channel, R3, regs[R3]);
+ write_zsreg(channel, R5, regs[R5]);
+
+ /* Rewrite R1, this time without IRQ enabled masked. */
+ write_zsreg(channel, R1, regs[R1]);
+}
+
+/* Reprogram the Zilog channel HW registers with the copies found in the
+ * software state struct. If the transmitter is busy, we defer this update
+ * until the next TX complete interrupt. Else, we do it right now.
+ *
+ * The UART port lock must be held and local interrupts disabled.
+ */
+static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up,
+ struct zilog_channel __iomem *channel)
+{
+ if (!ZS_REGS_HELD(up)) {
+ if (ZS_TX_ACTIVE(up)) {
+ up->flags |= SUNZILOG_FLAG_REGS_HELD;
+ } else {
+ __load_zsregs(channel, up->curregs);
+ }
+ }
+}
+
+static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up)
+{
+ unsigned int cur_cflag = up->cflag;
+ int brg, new_baud;
+
+ up->cflag &= ~CBAUD;
+ up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
+
+ brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ up->curregs[R12] = (brg & 0xff);
+ up->curregs[R13] = (brg >> 8) & 0xff;
+ sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port));
+}
+
+static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
+ unsigned char ch, int is_break,
+ struct pt_regs *regs)
+{
+ if (ZS_IS_KEYB(up)) {
+ /* Stop-A is handled by drivers/char/keyboard.c now. */
+#ifdef CONFIG_SERIO
+ if (up->serio_open)
+ serio_interrupt(up->serio, ch, 0, regs);
+#endif
+ } else if (ZS_IS_MOUSE(up)) {
+ int ret = suncore_mouse_baud_detection(ch, is_break);
+
+ switch (ret) {
+ case 2:
+ sunzilog_change_mouse_baud(up);
+ /* fallthru */
+ case 1:
+ break;
+
+ case 0:
+#ifdef CONFIG_SERIO
+ if (up->serio_open)
+ serio_interrupt(up->serio, ch, 0, regs);
+#endif
+ break;
+ };
+ }
+}
+
+static struct tty_struct *
+sunzilog_receive_chars(struct uart_sunzilog_port *up,
+ struct zilog_channel __iomem *channel,
+ struct pt_regs *regs)
+{
+ struct tty_struct *tty;
+ unsigned char ch, r1;
+
+ tty = NULL;
+ if (up->port.info != NULL && /* Unopened serial console */
+ up->port.info->tty != NULL) /* Keyboard || mouse */
+ tty = up->port.info->tty;
+
+ for (;;) {
+
+ r1 = read_zsreg(channel, R1);
+ if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+ sbus_writeb(ERR_RES, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+ }
+
+ ch = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ /* This funny hack depends upon BRK_ABRT not interfering
+ * with the other bits we care about in R1.
+ */
+ if (ch & BRK_ABRT)
+ r1 |= BRK_ABRT;
+
+ if (!(ch & Rx_CH_AV))
+ break;
+
+ ch = sbus_readb(&channel->data);
+ ZSDELAY();
+
+ ch &= up->parity_mask;
+
+ if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) {
+ sunzilog_kbdms_receive_chars(up, ch, 0, regs);
+ continue;
+ }
+
+ if (tty == NULL) {
+ uart_handle_sysrq_char(&up->port, ch, regs);
+ continue;
+ }
+
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ tty->flip.work.func((void *)tty);
+ /*
+ * The 8250 bails out of the loop here,
+ * but we need to read everything, or die.
+ */
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ continue;
+ }
+
+ /* A real serial line, record the character and status. */
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ up->port.icount.rx++;
+ if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
+ if (r1 & BRK_ABRT) {
+ r1 &= ~(PAR_ERR | CRC_ERR);
+ up->port.icount.brk++;
+ if (uart_handle_break(&up->port))
+ continue;
+ }
+ else if (r1 & PAR_ERR)
+ up->port.icount.parity++;
+ else if (r1 & CRC_ERR)
+ up->port.icount.frame++;
+ if (r1 & Rx_OVR)
+ up->port.icount.overrun++;
+ r1 &= up->port.read_status_mask;
+ if (r1 & BRK_ABRT)
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ else if (r1 & PAR_ERR)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (r1 & CRC_ERR)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ continue;
+
+ if (up->port.ignore_status_mask == 0xff ||
+ (r1 & up->port.ignore_status_mask) == 0) {
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ if ((r1 & Rx_OVR) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ }
+
+ return tty;
+}
+
+static void sunzilog_status_handle(struct uart_sunzilog_port *up,
+ struct zilog_channel __iomem *channel,
+ struct pt_regs *regs)
+{
+ unsigned char status;
+
+ status = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ sbus_writeb(RES_EXT_INT, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ if (status & BRK_ABRT) {
+ if (ZS_IS_MOUSE(up))
+ sunzilog_kbdms_receive_chars(up, 0, 1, regs);
+ if (ZS_IS_CONS(up)) {
+ /* Wait for BREAK to deassert to avoid potentially
+ * confusing the PROM.
+ */
+ while (1) {
+ status = sbus_readb(&channel->control);
+ ZSDELAY();
+ if (!(status & BRK_ABRT))
+ break;
+ }
+ sun_do_break();
+ return;
+ }
+ }
+
+ if (ZS_WANTS_MODEM_STATUS(up)) {
+ if (status & SYNC)
+ up->port.icount.dsr++;
+
+ /* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
+ * But it does not tell us which bit has changed, we have to keep
+ * track of this ourselves.
+ */
+ if ((status ^ up->prev_status) ^ DCD)
+ uart_handle_dcd_change(&up->port,
+ (status & DCD));
+ if ((status ^ up->prev_status) ^ CTS)
+ uart_handle_cts_change(&up->port,
+ (status & CTS));
+
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+ }
+
+ up->prev_status = status;
+}
+
+static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
+ struct zilog_channel __iomem *channel)
+{
+ struct circ_buf *xmit;
+
+ if (ZS_IS_CONS(up)) {
+ unsigned char status = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ /* TX still busy? Just wait for the next TX done interrupt.
+ *
+ * It can occur because of how we do serial console writes. It would
+ * be nice to transmit console writes just like we normally would for
+ * a TTY line. (ie. buffered and TX interrupt driven). That is not
+ * easy because console writes cannot sleep. One solution might be
+ * to poll on enough port->xmit space becomming free. -DaveM
+ */
+ if (!(status & Tx_BUF_EMP))
+ return;
+ }
+
+ up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE;
+
+ if (ZS_REGS_HELD(up)) {
+ __load_zsregs(channel, up->curregs);
+ up->flags &= ~SUNZILOG_FLAG_REGS_HELD;
+ }
+
+ if (ZS_TX_STOPPED(up)) {
+ up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
+ goto ack_tx_int;
+ }
+
+ if (up->port.x_char) {
+ up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
+ sbus_writeb(up->port.x_char, &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+
+ if (up->port.info == NULL)
+ goto ack_tx_int;
+ xmit = &up->port.info->xmit;
+ if (uart_circ_empty(xmit)) {
+ uart_write_wakeup(&up->port);
+ goto ack_tx_int;
+ }
+ if (uart_tx_stopped(&up->port))
+ goto ack_tx_int;
+
+ up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
+ sbus_writeb(xmit->buf[xmit->tail], &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ return;
+
+ack_tx_int:
+ sbus_writeb(RES_Tx_P, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+}
+
+static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_sunzilog_port *up = dev_id;
+
+ while (up) {
+ struct zilog_channel __iomem *channel
+ = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ struct tty_struct *tty;
+ unsigned char r3;
+
+ spin_lock(&up->port.lock);
+ r3 = read_zsreg(channel, R3);
+
+ /* Channel A */
+ tty = NULL;
+ if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+ sbus_writeb(RES_H_IUS, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ if (r3 & CHARxIP)
+ tty = sunzilog_receive_chars(up, channel, regs);
+ if (r3 & CHAEXT)
+ sunzilog_status_handle(up, channel, regs);
+ if (r3 & CHATxIP)
+ sunzilog_transmit_chars(up, channel);
+ }
+ spin_unlock(&up->port.lock);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ /* Channel B */
+ up = up->next;
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+ spin_lock(&up->port.lock);
+ tty = NULL;
+ if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
+ sbus_writeb(RES_H_IUS, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ if (r3 & CHBRxIP)
+ tty = sunzilog_receive_chars(up, channel, regs);
+ if (r3 & CHBEXT)
+ sunzilog_status_handle(up, channel, regs);
+ if (r3 & CHBTxIP)
+ sunzilog_transmit_chars(up, channel);
+ }
+ spin_unlock(&up->port.lock);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ up = up->next;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* A convenient way to quickly get R0 status. The caller must _not_ hold the
+ * port lock, it is acquired here.
+ */
+static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port)
+{
+ struct zilog_channel __iomem *channel;
+ unsigned long flags;
+ unsigned char status;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ channel = ZILOG_CHANNEL_FROM_PORT(port);
+ status = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return status;
+}
+
+/* The port lock is not held. */
+static unsigned int sunzilog_tx_empty(struct uart_port *port)
+{
+ unsigned char status;
+ unsigned int ret;
+
+ status = sunzilog_read_channel_status(port);
+ if (status & Tx_BUF_EMP)
+ ret = TIOCSER_TEMT;
+ else
+ ret = 0;
+
+ return ret;
+}
+
+/* The port lock is not held. */
+static unsigned int sunzilog_get_mctrl(struct uart_port *port)
+{
+ unsigned char status;
+ unsigned int ret;
+
+ status = sunzilog_read_channel_status(port);
+
+ ret = 0;
+ if (status & DCD)
+ ret |= TIOCM_CAR;
+ if (status & SYNC)
+ ret |= TIOCM_DSR;
+ if (status & CTS)
+ ret |= TIOCM_CTS;
+
+ return ret;
+}
+
+/* The port lock is held and interrupts are disabled. */
+static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char set_bits, clear_bits;
+
+ set_bits = clear_bits = 0;
+
+ if (mctrl & TIOCM_RTS)
+ set_bits |= RTS;
+ else
+ clear_bits |= RTS;
+ if (mctrl & TIOCM_DTR)
+ set_bits |= DTR;
+ else
+ clear_bits |= DTR;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ up->curregs[R5] |= set_bits;
+ up->curregs[R5] &= ~clear_bits;
+ write_zsreg(channel, R5, up->curregs[R5]);
+}
+
+/* The port lock is held and interrupts are disabled. */
+static void sunzilog_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+
+ up->flags |= SUNZILOG_FLAG_TX_STOPPED;
+}
+
+/* The port lock is held and interrupts are disabled. */
+static void sunzilog_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char status;
+
+ up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
+ up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
+
+ status = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ /* TX busy? Just wait for the TX done interrupt. */
+ if (!(status & Tx_BUF_EMP))
+ return;
+
+ /* Send the first character to jump-start the TX done
+ * IRQ sending engine.
+ */
+ if (port->x_char) {
+ sbus_writeb(port->x_char, &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ port->icount.tx++;
+ port->x_char = 0;
+ } else {
+ struct circ_buf *xmit = &port->info->xmit;
+
+ sbus_writeb(xmit->buf[xmit->tail], &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+ }
+}
+
+/* The port lock is held. */
+static void sunzilog_stop_rx(struct uart_port *port)
+{
+ struct uart_sunzilog_port *up = UART_ZILOG(port);
+ struct zilog_channel __iomem *channel;
+
+ if (ZS_IS_CONS(up))
+ return;
+
+ channel = ZILOG_CHANNEL_FROM_PORT(port);
+
+ /* Disable all RX interrupts. */
+ up->curregs[R1] &= ~RxINT_MASK;
+ sunzilog_maybe_update_regs(up, channel);
+}
+
+/* The port lock is held. */
+static void sunzilog_enable_ms(struct uart_port *port)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char new_reg;
+
+ new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
+ if (new_reg != up->curregs[R15]) {
+ up->curregs[R15] = new_reg;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ write_zsreg(channel, R15, up->curregs[R15]);
+ }
+}
+
+/* The port lock is not held. */
+static void sunzilog_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char set_bits, clear_bits, new_reg;
+ unsigned long flags;
+
+ set_bits = clear_bits = 0;
+
+ if (break_state)
+ set_bits |= SND_BRK;
+ else
+ clear_bits |= SND_BRK;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ new_reg = (up->curregs[R5] | set_bits) & ~clear_bits;
+ if (new_reg != up->curregs[R5]) {
+ up->curregs[R5] = new_reg;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ write_zsreg(channel, R5, up->curregs[R5]);
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void __sunzilog_startup(struct uart_sunzilog_port *up)
+{
+ struct zilog_channel __iomem *channel;
+
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ up->prev_status = sbus_readb(&channel->control);
+
+ /* Enable receiver and transmitter. */
+ up->curregs[R3] |= RxENAB;
+ up->curregs[R5] |= TxENAB;
+
+ up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+ sunzilog_maybe_update_regs(up, channel);
+}
+
+static int sunzilog_startup(struct uart_port *port)
+{
+ struct uart_sunzilog_port *up = UART_ZILOG(port);
+ unsigned long flags;
+
+ if (ZS_IS_CONS(up))
+ return 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ __sunzilog_startup(up);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return 0;
+}
+
+/*
+ * The test for ZS_IS_CONS is explained by the following e-mail:
+ *****
+ * From: Russell King <rmk@arm.linux.org.uk>
+ * Date: Sun, 8 Dec 2002 10:18:38 +0000
+ *
+ * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote:
+ * > I boot my 2.5 boxes using "console=ttyS0,9600" argument,
+ * > and I noticed that something is not right with reference
+ * > counting in this case. It seems that when the console
+ * > is open by kernel initially, this is not accounted
+ * > as an open, and uart_startup is not called.
+ *
+ * That is correct. We are unable to call uart_startup when the serial
+ * console is initialised because it may need to allocate memory (as
+ * request_irq does) and the memory allocators may not have been
+ * initialised.
+ *
+ * 1. initialise the port into a state where it can send characters in the
+ * console write method.
+ *
+ * 2. don't do the actual hardware shutdown in your shutdown() method (but
+ * do the normal software shutdown - ie, free irqs etc)
+ *****
+ */
+static void sunzilog_shutdown(struct uart_port *port)
+{
+ struct uart_sunzilog_port *up = UART_ZILOG(port);
+ struct zilog_channel __iomem *channel;
+ unsigned long flags;
+
+ if (ZS_IS_CONS(up))
+ return;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ channel = ZILOG_CHANNEL_FROM_PORT(port);
+
+ /* Disable receiver and transmitter. */
+ up->curregs[R3] &= ~RxENAB;
+ up->curregs[R5] &= ~TxENAB;
+
+ /* Disable all interrupts and BRK assertion. */
+ up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
+ up->curregs[R5] &= ~SND_BRK;
+ sunzilog_maybe_update_regs(up, channel);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Shared by TTY driver and serial console setup. The port lock is held
+ * and local interrupts are disabled.
+ */
+static void
+sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
+ unsigned int iflag, int brg)
+{
+
+ up->curregs[R10] = NRZ;
+ up->curregs[R11] = TCBR | RCBR;
+
+ /* Program BAUD and clock source. */
+ up->curregs[R4] &= ~XCLK_MASK;
+ up->curregs[R4] |= X16CLK;
+ up->curregs[R12] = brg & 0xff;
+ up->curregs[R13] = (brg >> 8) & 0xff;
+ up->curregs[R14] = BRSRC | BRENAB;
+
+ /* Character size, stop bits, and parity. */
+ up->curregs[3] &= ~RxN_MASK;
+ up->curregs[5] &= ~TxN_MASK;
+ switch (cflag & CSIZE) {
+ case CS5:
+ up->curregs[3] |= Rx5;
+ up->curregs[5] |= Tx5;
+ up->parity_mask = 0x1f;
+ break;
+ case CS6:
+ up->curregs[3] |= Rx6;
+ up->curregs[5] |= Tx6;
+ up->parity_mask = 0x3f;
+ break;
+ case CS7:
+ up->curregs[3] |= Rx7;
+ up->curregs[5] |= Tx7;
+ up->parity_mask = 0x7f;
+ break;
+ case CS8:
+ default:
+ up->curregs[3] |= Rx8;
+ up->curregs[5] |= Tx8;
+ up->parity_mask = 0xff;
+ break;
+ };
+ up->curregs[4] &= ~0x0c;
+ if (cflag & CSTOPB)
+ up->curregs[4] |= SB2;
+ else
+ up->curregs[4] |= SB1;
+ if (cflag & PARENB)
+ up->curregs[4] |= PAR_ENAB;
+ else
+ up->curregs[4] &= ~PAR_ENAB;
+ if (!(cflag & PARODD))
+ up->curregs[4] |= PAR_EVEN;
+ else
+ up->curregs[4] &= ~PAR_EVEN;
+
+ up->port.read_status_mask = Rx_OVR;
+ if (iflag & INPCK)
+ up->port.read_status_mask |= CRC_ERR | PAR_ERR;
+ if (iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= BRK_ABRT;
+
+ up->port.ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
+ if (iflag & IGNBRK) {
+ up->port.ignore_status_mask |= BRK_ABRT;
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= Rx_OVR;
+ }
+
+ if ((cflag & CREAD) == 0)
+ up->port.ignore_status_mask = 0xff;
+}
+
+/* The port lock is not held. */
+static void
+sunzilog_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ unsigned long flags;
+ int baud, brg;
+
+ baud = uart_get_baud_rate(port, termios, old, 1200, 76800);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+
+ sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg);
+
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->flags |= SUNZILOG_FLAG_MODEM_STATUS;
+ else
+ up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS;
+
+ up->cflag = termios->c_cflag;
+
+ sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static const char *sunzilog_type(struct uart_port *port)
+{
+ return "SunZilog";
+}
+
+/* We do not request/release mappings of the registers here, this
+ * happens at early serial probe time.
+ */
+static void sunzilog_release_port(struct uart_port *port)
+{
+}
+
+static int sunzilog_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/* These do not need to do anything interesting either. */
+static void sunzilog_config_port(struct uart_port *port, int flags)
+{
+}
+
+/* We do not support letting the user mess with the divisor, IRQ, etc. */
+static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return -EINVAL;
+}
+
+static struct uart_ops sunzilog_pops = {
+ .tx_empty = sunzilog_tx_empty,
+ .set_mctrl = sunzilog_set_mctrl,
+ .get_mctrl = sunzilog_get_mctrl,
+ .stop_tx = sunzilog_stop_tx,
+ .start_tx = sunzilog_start_tx,
+ .stop_rx = sunzilog_stop_rx,
+ .enable_ms = sunzilog_enable_ms,
+ .break_ctl = sunzilog_break_ctl,
+ .startup = sunzilog_startup,
+ .shutdown = sunzilog_shutdown,
+ .set_termios = sunzilog_set_termios,
+ .type = sunzilog_type,
+ .release_port = sunzilog_release_port,
+ .request_port = sunzilog_request_port,
+ .config_port = sunzilog_config_port,
+ .verify_port = sunzilog_verify_port,
+};
+
+static struct uart_sunzilog_port *sunzilog_port_table;
+static struct zilog_layout __iomem **sunzilog_chip_regs;
+
+static struct uart_sunzilog_port *sunzilog_irq_chain;
+static int zilog_irq = -1;
+
+static struct uart_driver sunzilog_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyS",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+};
+
+static void * __init alloc_one_table(unsigned long size)
+{
+ void *ret;
+
+ ret = kmalloc(size, GFP_KERNEL);
+ if (ret != NULL)
+ memset(ret, 0, size);
+
+ return ret;
+}
+
+static void __init sunzilog_alloc_tables(void)
+{
+ sunzilog_port_table =
+ alloc_one_table(NUM_CHANNELS * sizeof(struct uart_sunzilog_port));
+ sunzilog_chip_regs =
+ alloc_one_table(NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *));
+
+ if (sunzilog_port_table == NULL || sunzilog_chip_regs == NULL) {
+ prom_printf("SunZilog: Cannot allocate tables.\n");
+ prom_halt();
+ }
+}
+
+#ifdef CONFIG_SPARC64
+
+/* We used to attempt to use the address property of the Zilog device node
+ * but that totally is not necessary on sparc64.
+ */
+static struct zilog_layout __iomem * __init get_zs_sun4u(int chip, int zsnode)
+{
+ unsigned long mapped_addr;
+ unsigned int sun4u_ino;
+ struct sbus_bus *sbus = NULL;
+ struct sbus_dev *sdev = NULL;
+ int err;
+
+ if (central_bus == NULL) {
+ for_each_sbus(sbus) {
+ for_each_sbusdev(sdev, sbus) {
+ if (sdev->prom_node == zsnode)
+ goto found;
+ }
+ }
+ }
+ found:
+ if (sdev == NULL && central_bus == NULL) {
+ prom_printf("SunZilog: sdev&&central == NULL for "
+ "Zilog %d in get_zs_sun4u.\n", chip);
+ prom_halt();
+ }
+ if (central_bus == NULL) {
+ mapped_addr =
+ sbus_ioremap(&sdev->resource[0], 0,
+ PAGE_SIZE,
+ "Zilog Registers");
+ } else {
+ struct linux_prom_registers zsregs[1];
+
+ err = prom_getproperty(zsnode, "reg",
+ (char *) &zsregs[0],
+ sizeof(zsregs));
+ if (err == -1) {
+ prom_printf("SunZilog: Cannot map "
+ "Zilog %d regs on "
+ "central bus.\n", chip);
+ prom_halt();
+ }
+ apply_fhc_ranges(central_bus->child,
+ &zsregs[0], 1);
+ apply_central_ranges(central_bus, &zsregs[0], 1);
+ mapped_addr =
+ (((u64)zsregs[0].which_io)<<32UL) |
+ ((u64)zsregs[0].phys_addr);
+ }
+
+ if (zilog_irq == -1) {
+ if (central_bus) {
+ unsigned long iclr, imap;
+
+ iclr = central_bus->child->fhc_regs.uregs
+ + FHC_UREGS_ICLR;
+ imap = central_bus->child->fhc_regs.uregs
+ + FHC_UREGS_IMAP;
+ zilog_irq = build_irq(12, 0, iclr, imap);
+ } else {
+ err = prom_getproperty(zsnode, "interrupts",
+ (char *) &sun4u_ino,
+ sizeof(sun4u_ino));
+ zilog_irq = sbus_build_irq(sbus_root, sun4u_ino);
+ }
+ }
+
+ return (struct zilog_layout __iomem *) mapped_addr;
+}
+#else /* CONFIG_SPARC64 */
+
+/*
+ * XXX The sun4d case is utterly screwed: it tries to re-walk the tree
+ * (for the 3rd time) in order to find bootbus and cpu. Streamline it.
+ */
+static struct zilog_layout __iomem * __init get_zs_sun4cmd(int chip, int node)
+{
+ struct linux_prom_irqs irq_info[2];
+ void __iomem *mapped_addr = NULL;
+ int zsnode, cpunode, bbnode;
+ struct linux_prom_registers zsreg[4];
+ struct resource res;
+
+ if (sparc_cpu_model == sun4d) {
+ int walk;
+
+ zsnode = 0;
+ bbnode = 0;
+ cpunode = 0;
+ for (walk = prom_getchild(prom_root_node);
+ (walk = prom_searchsiblings(walk, "cpu-unit")) != 0;
+ walk = prom_getsibling(walk)) {
+ bbnode = prom_getchild(walk);
+ if (bbnode &&
+ (bbnode = prom_searchsiblings(bbnode, "bootbus"))) {
+ if ((zsnode = prom_getchild(bbnode)) == node) {
+ cpunode = walk;
+ break;
+ }
+ }
+ }
+ if (!walk) {
+ prom_printf("SunZilog: Cannot find the %d'th bootbus on sun4d.\n",
+ (chip / 2));
+ prom_halt();
+ }
+
+ if (prom_getproperty(zsnode, "reg",
+ (char *) zsreg, sizeof(zsreg)) == -1) {
+ prom_printf("SunZilog: Cannot map Zilog %d\n", chip);
+ prom_halt();
+ }
+ /* XXX Looks like an off by one? */
+ prom_apply_generic_ranges(bbnode, cpunode, zsreg, 1);
+ res.start = zsreg[0].phys_addr;
+ res.end = res.start + (8 - 1);
+ res.flags = zsreg[0].which_io | IORESOURCE_IO;
+ mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial");
+
+ } else {
+ zsnode = node;
+
+#if 0 /* XXX When was this used? */
+ if (prom_getintdefault(zsnode, "slave", -1) != chipid) {
+ zsnode = prom_getsibling(zsnode);
+ continue;
+ }
+#endif
+
+ /*
+ * "address" is only present on ports that OBP opened
+ * (from Mitch Bradley's "Hitchhiker's Guide to OBP").
+ * We do not use it.
+ */
+
+ if (prom_getproperty(zsnode, "reg",
+ (char *) zsreg, sizeof(zsreg)) == -1) {
+ prom_printf("SunZilog: Cannot map Zilog %d\n", chip);
+ prom_halt();
+ }
+ if (sparc_cpu_model == sun4m) /* Crude. Pass parent. XXX */
+ prom_apply_obio_ranges(zsreg, 1);
+ res.start = zsreg[0].phys_addr;
+ res.end = res.start + (8 - 1);
+ res.flags = zsreg[0].which_io | IORESOURCE_IO;
+ mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial");
+ }
+
+ if (prom_getproperty(zsnode, "intr",
+ (char *) irq_info, sizeof(irq_info))
+ % sizeof(struct linux_prom_irqs)) {
+ prom_printf("SunZilog: Cannot get IRQ property for Zilog %d.\n",
+ chip);
+ prom_halt();
+ }
+ if (zilog_irq == -1) {
+ zilog_irq = irq_info[0].pri;
+ } else if (zilog_irq != irq_info[0].pri) {
+ /* XXX. Dumb. Should handle per-chip IRQ, for add-ons. */
+ prom_printf("SunZilog: Inconsistent IRQ layout for Zilog %d.\n",
+ chip);
+ prom_halt();
+ }
+
+ return (struct zilog_layout __iomem *) mapped_addr;
+}
+#endif /* !(CONFIG_SPARC64) */
+
+/* Get the address of the registers for SunZilog instance CHIP. */
+static struct zilog_layout __iomem * __init get_zs(int chip, int node)
+{
+ if (chip < 0 || chip >= NUM_SUNZILOG) {
+ prom_printf("SunZilog: Illegal chip number %d in get_zs.\n", chip);
+ prom_halt();
+ }
+
+#ifdef CONFIG_SPARC64
+ return get_zs_sun4u(chip, node);
+#else
+
+ if (sparc_cpu_model == sun4) {
+ struct resource res;
+
+ /* Not probe-able, hard code it. */
+ switch (chip) {
+ case 0:
+ res.start = 0xf1000000;
+ break;
+ case 1:
+ res.start = 0xf0000000;
+ break;
+ };
+ zilog_irq = 12;
+ res.end = (res.start + (8 - 1));
+ res.flags = IORESOURCE_IO;
+ return sbus_ioremap(&res, 0, 8, "SunZilog");
+ }
+
+ return get_zs_sun4cmd(chip, node);
+#endif
+}
+
+#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */
+
+static void sunzilog_put_char(struct zilog_channel __iomem *channel, unsigned char ch)
+{
+ int loops = ZS_PUT_CHAR_MAX_DELAY;
+
+ /* This is a timed polling loop so do not switch the explicit
+ * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM
+ */
+ do {
+ unsigned char val = sbus_readb(&channel->control);
+ if (val & Tx_BUF_EMP) {
+ ZSDELAY();
+ break;
+ }
+ udelay(5);
+ } while (--loops);
+
+ sbus_writeb(ch, &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+}
+
+#ifdef CONFIG_SERIO
+
+static DEFINE_SPINLOCK(sunzilog_serio_lock);
+
+static int sunzilog_serio_write(struct serio *serio, unsigned char ch)
+{
+ struct uart_sunzilog_port *up = serio->port_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sunzilog_serio_lock, flags);
+
+ sunzilog_put_char(ZILOG_CHANNEL_FROM_PORT(&up->port), ch);
+
+ spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
+
+ return 0;
+}
+
+static int sunzilog_serio_open(struct serio *serio)
+{
+ struct uart_sunzilog_port *up = serio->port_data;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&sunzilog_serio_lock, flags);
+ if (!up->serio_open) {
+ up->serio_open = 1;
+ ret = 0;
+ } else
+ ret = -EBUSY;
+ spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
+
+ return ret;
+}
+
+static void sunzilog_serio_close(struct serio *serio)
+{
+ struct uart_sunzilog_port *up = serio->port_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sunzilog_serio_lock, flags);
+ up->serio_open = 0;
+ spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
+}
+
+#endif /* CONFIG_SERIO */
+
+#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE
+static void
+sunzilog_console_write(struct console *con, const char *s, unsigned int count)
+{
+ struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
+ struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ for (i = 0; i < count; i++, s++) {
+ sunzilog_put_char(channel, *s);
+ if (*s == 10)
+ sunzilog_put_char(channel, 13);
+ }
+ udelay(2);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int __init sunzilog_console_setup(struct console *con, char *options)
+{
+ struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
+ unsigned long flags;
+ int baud, brg;
+
+ printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
+ (sunzilog_reg.minor - 64) + con->index, con->index);
+
+ /* Get firmware console settings. */
+ sunserial_console_termios(con);
+
+ /* Firmware console speed is limited to 150-->38400 baud so
+ * this hackish cflag thing is OK.
+ */
+ switch (con->cflag & CBAUD) {
+ case B150: baud = 150; break;
+ case B300: baud = 300; break;
+ case B600: baud = 600; break;
+ case B1200: baud = 1200; break;
+ case B2400: baud = 2400; break;
+ case B4800: baud = 4800; break;
+ default: case B9600: baud = 9600; break;
+ case B19200: baud = 19200; break;
+ case B38400: baud = 38400; break;
+ };
+
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->curregs[R15] = BRKIE;
+ sunzilog_convert_to_zs(up, con->cflag, 0, brg);
+
+ sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
+ __sunzilog_startup(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+static struct console sunzilog_console = {
+ .name = "ttyS",
+ .write = sunzilog_console_write,
+ .device = uart_console_device,
+ .setup = sunzilog_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sunzilog_reg,
+};
+#define SUNZILOG_CONSOLE (&sunzilog_console)
+
+static int __init sunzilog_console_init(void)
+{
+ int i;
+
+ if (con_is_present())
+ return 0;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ int this_minor = sunzilog_reg.minor + i;
+
+ if ((this_minor - 64) == (serial_console - 1))
+ break;
+ }
+ if (i == NUM_CHANNELS)
+ return 0;
+
+ sunzilog_console.index = i;
+ sunzilog_port_table[i].flags |= SUNZILOG_FLAG_IS_CONS;
+ register_console(&sunzilog_console);
+ return 0;
+}
+#else
+#define SUNZILOG_CONSOLE (NULL)
+#define sunzilog_console_init() do { } while (0)
+#endif
+
+/*
+ * We scan the PROM tree recursively. This is the most reliable way
+ * to find Zilog nodes on various platforms. However, we face an extreme
+ * shortage of kernel stack, so we must be very careful. To that end,
+ * we scan only to a certain depth, and we use a common property buffer
+ * in the scan structure.
+ */
+#define ZS_PROPSIZE 128
+#define ZS_SCAN_DEPTH 5
+
+struct zs_probe_scan {
+ int depth;
+ void (*scanner)(struct zs_probe_scan *t, int node);
+
+ int devices;
+ char prop[ZS_PROPSIZE];
+};
+
+static int __inline__ sunzilog_node_ok(int node, const char *name, int len)
+{
+ if (strncmp(name, "zs", len) == 0)
+ return 1;
+ /* Don't fold this procedure just yet. Compare to su_node_ok(). */
+ return 0;
+}
+
+static void __init sunzilog_scan(struct zs_probe_scan *t, int node)
+{
+ int len;
+
+ for (; node != 0; node = prom_getsibling(node)) {
+ len = prom_getproperty(node, "name", t->prop, ZS_PROPSIZE);
+ if (len <= 1)
+ continue; /* Broken PROM node */
+ if (sunzilog_node_ok(node, t->prop, len)) {
+ (*t->scanner)(t, node);
+ } else {
+ if (t->depth < ZS_SCAN_DEPTH) {
+ t->depth++;
+ sunzilog_scan(t, prom_getchild(node));
+ --t->depth;
+ }
+ }
+ }
+}
+
+static void __init sunzilog_prepare(void)
+{
+ struct uart_sunzilog_port *up;
+ struct zilog_layout __iomem *rp;
+ int channel, chip;
+
+ /*
+ * Temporary fix.
+ */
+ for (channel = 0; channel < NUM_CHANNELS; channel++)
+ spin_lock_init(&sunzilog_port_table[channel].port.lock);
+
+ sunzilog_irq_chain = up = &sunzilog_port_table[0];
+ for (channel = 0; channel < NUM_CHANNELS - 1; channel++)
+ up[channel].next = &up[channel + 1];
+ up[channel].next = NULL;
+
+ for (chip = 0; chip < NUM_SUNZILOG; chip++) {
+ rp = sunzilog_chip_regs[chip];
+ up[(chip * 2) + 0].port.membase = (void __iomem *)&rp->channelA;
+ up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB;
+
+ /* Channel A */
+ up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM;
+ up[(chip * 2) + 0].port.irq = zilog_irq;
+ up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
+ up[(chip * 2) + 0].port.fifosize = 1;
+ up[(chip * 2) + 0].port.ops = &sunzilog_pops;
+ up[(chip * 2) + 0].port.type = PORT_SUNZILOG;
+ up[(chip * 2) + 0].port.flags = 0;
+ up[(chip * 2) + 0].port.line = (chip * 2) + 0;
+ up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
+
+ /* Channel B */
+ up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM;
+ up[(chip * 2) + 1].port.irq = zilog_irq;
+ up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
+ up[(chip * 2) + 1].port.fifosize = 1;
+ up[(chip * 2) + 1].port.ops = &sunzilog_pops;
+ up[(chip * 2) + 1].port.type = PORT_SUNZILOG;
+ up[(chip * 2) + 1].port.flags = 0;
+ up[(chip * 2) + 1].port.line = (chip * 2) + 1;
+ up[(chip * 2) + 1].flags |= 0;
+ }
+}
+
+static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel)
+{
+ int baud, brg;
+
+ if (channel == KEYBOARD_LINE) {
+ up->flags |= SUNZILOG_FLAG_CONS_KEYB;
+ up->cflag = B1200 | CS8 | CLOCAL | CREAD;
+ baud = 1200;
+ } else {
+ up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
+ up->cflag = B4800 | CS8 | CLOCAL | CREAD;
+ baud = 4800;
+ }
+ printk(KERN_INFO "zs%d at 0x%p (irq = %s) is a SunZilog\n",
+ channel, up->port.membase, __irq_itoa(zilog_irq));
+
+ up->curregs[R15] = BRKIE;
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ sunzilog_convert_to_zs(up, up->cflag, 0, brg);
+ sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
+ __sunzilog_startup(up);
+}
+
+#ifdef CONFIG_SERIO
+static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
+{
+ struct serio *serio;
+
+ up->serio = serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
+ if (serio) {
+ memset(serio, 0, sizeof(*serio));
+
+ serio->port_data = up;
+
+ serio->id.type = SERIO_RS232;
+ if (channel == KEYBOARD_LINE) {
+ serio->id.proto = SERIO_SUNKBD;
+ strlcpy(serio->name, "zskbd", sizeof(serio->name));
+ } else {
+ serio->id.proto = SERIO_SUN;
+ serio->id.extra = 1;
+ strlcpy(serio->name, "zsms", sizeof(serio->name));
+ }
+ strlcpy(serio->phys,
+ (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
+ sizeof(serio->phys));
+
+ serio->write = sunzilog_serio_write;
+ serio->open = sunzilog_serio_open;
+ serio->close = sunzilog_serio_close;
+
+ serio_register_port(serio);
+ } else {
+ printk(KERN_WARNING "zs%d: not enough memory for serio port\n",
+ channel);
+ }
+}
+#endif
+
+static void __init sunzilog_init_hw(void)
+{
+ int i;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_sunzilog_port *up = &sunzilog_port_table[i];
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ unsigned long flags;
+ int baud, brg;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ if (ZS_IS_CHANNEL_A(up)) {
+ write_zsreg(channel, R9, FHWRES);
+ ZSDELAY_LONG();
+ (void) read_zsreg(channel, R0);
+ }
+
+ if (i == KEYBOARD_LINE || i == MOUSE_LINE) {
+ sunzilog_init_kbdms(up, i);
+ up->curregs[R9] |= (NV | MIE);
+ write_zsreg(channel, R9, up->curregs[R9]);
+ } else {
+ /* Normal serial TTY. */
+ up->parity_mask = 0xff;
+ up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+ up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
+ up->curregs[R3] = RxENAB | Rx8;
+ up->curregs[R5] = TxENAB | Tx8;
+ up->curregs[R9] = NV | MIE;
+ up->curregs[R10] = NRZ;
+ up->curregs[R11] = TCBR | RCBR;
+ baud = 9600;
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ up->curregs[R12] = (brg & 0xff);
+ up->curregs[R13] = (brg >> 8) & 0xff;
+ up->curregs[R14] = BRSRC | BRENAB;
+ __load_zsregs(channel, up->curregs);
+ write_zsreg(channel, R9, up->curregs[R9]);
+ }
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+#ifdef CONFIG_SERIO
+ if (i == KEYBOARD_LINE || i == MOUSE_LINE)
+ sunzilog_register_serio(up, i);
+#endif
+ }
+}
+
+static struct zilog_layout __iomem * __init get_zs(int chip, int node);
+
+static void __init sunzilog_scan_probe(struct zs_probe_scan *t, int node)
+{
+ sunzilog_chip_regs[t->devices] = get_zs(t->devices, node);
+ t->devices++;
+}
+
+static int __init sunzilog_ports_init(void)
+{
+ struct zs_probe_scan scan;
+ int ret;
+ int uart_count;
+ int i;
+
+ printk(KERN_DEBUG "SunZilog: %d chips.\n", NUM_SUNZILOG);
+
+ scan.scanner = sunzilog_scan_probe;
+ scan.depth = 0;
+ scan.devices = 0;
+ sunzilog_scan(&scan, prom_getchild(prom_root_node));
+
+ sunzilog_prepare();
+
+ if (request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ,
+ "SunZilog", sunzilog_irq_chain)) {
+ prom_printf("SunZilog: Unable to register zs interrupt handler.\n");
+ prom_halt();
+ }
+
+ sunzilog_init_hw();
+
+ /* We can only init this once we have probed the Zilogs
+ * in the system. Do not count channels assigned to keyboards
+ * or mice when we are deciding how many ports to register.
+ */
+ uart_count = 0;
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_sunzilog_port *up = &sunzilog_port_table[i];
+
+ if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
+ continue;
+
+ uart_count++;
+ }
+
+ sunzilog_reg.nr = uart_count;
+ sunzilog_reg.cons = SUNZILOG_CONSOLE;
+
+ sunzilog_reg.minor = sunserial_current_minor;
+ sunserial_current_minor += uart_count;
+
+ ret = uart_register_driver(&sunzilog_reg);
+ if (ret == 0) {
+ sunzilog_console_init();
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_sunzilog_port *up = &sunzilog_port_table[i];
+
+ if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
+ continue;
+
+ if (uart_add_one_port(&sunzilog_reg, &up->port)) {
+ printk(KERN_ERR
+ "SunZilog: failed to add port zs%d\n", i);
+ }
+ }
+ }
+
+ return ret;
+}
+
+static void __init sunzilog_scan_count(struct zs_probe_scan *t, int node)
+{
+ t->devices++;
+}
+
+static int __init sunzilog_ports_count(void)
+{
+ struct zs_probe_scan scan;
+
+ /* Sun4 Zilog setup is hard coded, no probing to do. */
+ if (sparc_cpu_model == sun4)
+ return 2;
+
+ scan.scanner = sunzilog_scan_count;
+ scan.depth = 0;
+ scan.devices = 0;
+
+ sunzilog_scan(&scan, prom_getchild(prom_root_node));
+
+ return scan.devices;
+}
+
+static int __init sunzilog_init(void)
+{
+
+ NUM_SUNZILOG = sunzilog_ports_count();
+ if (NUM_SUNZILOG == 0)
+ return -ENODEV;
+
+ sunzilog_alloc_tables();
+
+ sunzilog_ports_init();
+
+ return 0;
+}
+
+static void __exit sunzilog_exit(void)
+{
+ int i;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_sunzilog_port *up = &sunzilog_port_table[i];
+
+ if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
+#ifdef CONFIG_SERIO
+ if (up->serio) {
+ serio_unregister_port(up->serio);
+ up->serio = NULL;
+ }
+#endif
+ } else
+ uart_remove_one_port(&sunzilog_reg, &up->port);
+ }
+
+ uart_unregister_driver(&sunzilog_reg);
+}
+
+module_init(sunzilog_init);
+module_exit(sunzilog_exit);
+
+MODULE_AUTHOR("David S. Miller");
+MODULE_DESCRIPTION("Sun Zilog serial port driver");
+MODULE_LICENSE("GPL");