diff options
author | Alan Cox <alan@lxorguk.ukuu.org.uk> | 2008-02-08 12:18:51 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2008-02-08 17:22:25 (GMT) |
commit | 5756ee99967d65fa8e14873d55cdf150659097ee (patch) | |
tree | 06f1ca49bc3805359c0b365b63e9cb6c600263df /drivers/serial | |
parent | 3b0fd36ddc5826cbf20c8766d9262bc2efd3a51c (diff) | |
download | linux-5756ee99967d65fa8e14873d55cdf150659097ee.tar.xz |
8250_pci: coding style
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/serial')
-rw-r--r-- | drivers/serial/8250_pci.c | 109 |
1 files changed, 54 insertions, 55 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 0a4ac2b..a8bec49 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -140,7 +140,7 @@ afavlab_setup(struct serial_private *priv, struct pciserial_board *board, struct uart_port *port, int idx) { unsigned int bar, offset = board->first_offset; - + bar = FL_GET_BASE(board->flags); if (idx < 4) bar += idx; @@ -227,8 +227,8 @@ static int pci_inteli960ni_init(struct pci_dev *dev) return -ENODEV; /* is firmware started? */ - pci_read_config_dword(dev, 0x44, (void*) &oldval); - if (oldval == 0x00001000L) { /* RESET value */ + pci_read_config_dword(dev, 0x44, (void *)&oldval); + if (oldval == 0x00001000L) { /* RESET value */ printk(KERN_DEBUG "Local i960 firmware missing"); return -ENODEV; } @@ -253,11 +253,11 @@ static int pci_plx9050_init(struct pci_dev *dev) irq_config = 0x41; if (dev->vendor == PCI_VENDOR_ID_PANACOM || - dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) { + dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) irq_config = 0x43; - } + if ((dev->vendor == PCI_VENDOR_ID_PLX) && - (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) { + (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) /* * As the megawolf cards have the int pins active * high, and have 2 UART chips, both ints must be @@ -267,8 +267,6 @@ static int pci_plx9050_init(struct pci_dev *dev) * deep FIFOs */ irq_config = 0x5b; - } - /* * enable/disable interrupts */ @@ -343,14 +341,14 @@ static int sbs_init(struct pci_dev *dev) { u8 __iomem *p; - p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); + p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0)); if (p == NULL) return -ENOMEM; /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ - writeb(0x10,p + OCT_REG_CR_OFF); + writeb(0x10, p + OCT_REG_CR_OFF); udelay(50); - writeb(0x0,p + OCT_REG_CR_OFF); + writeb(0x0, p + OCT_REG_CR_OFF); /* Set bit-2 (INTENABLE) of Control Register */ writeb(0x4, p + OCT_REG_CR_OFF); @@ -367,10 +365,10 @@ static void __devexit sbs_exit(struct pci_dev *dev) { u8 __iomem *p; - p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); - if (p != NULL) { + p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0)); + /* FIXME: What if resource_len < OCT_REG_CR_OFF */ + if (p != NULL) writeb(0, p + OCT_REG_CR_OFF); - } iounmap(p); } @@ -386,7 +384,7 @@ static void __devexit sbs_exit(struct pci_dev *dev) * with other OSes (like M$ DOS). * * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999 - * + * * There is two family of SIIG serial cards with different PCI * interface chip and different configuration methods: * - 10x cards have control registers in IO and/or memory space; @@ -489,21 +487,21 @@ static const unsigned short timedia_single_port[] = { static const unsigned short timedia_dual_port[] = { 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, - 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, - 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, + 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, + 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 0xD079, 0 }; static const unsigned short timedia_quad_port[] = { - 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, - 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, + 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, + 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 0xB157, 0 }; static const unsigned short timedia_eight_port[] = { - 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, + 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 }; @@ -656,7 +654,8 @@ static int pci_ite887x_init(struct pci_dev *dev) ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); /* write INTCBAR - ioport */ - pci_write_config_dword(dev, ITE_887x_INTCBAR, inta_addr[i]); + pci_write_config_dword(dev, ITE_887x_INTCBAR, + inta_addr[i]); ret = inb(inta_addr[i]); if (ret != 0xff) { /* ioport connected */ @@ -755,7 +754,7 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board, if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) return 1; - + return setup_port(priv, port, bar, offset, board->reg_shift); } @@ -843,7 +842,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .init = pci_plx9050_init, .setup = pci_default_setup, .exit = __devexit_p(pci_plx9050_exit), - }, + }, { .vendor = PCI_VENDOR_ID_PANACOM, .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, @@ -1032,7 +1031,7 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) quirk_id_matches(quirk->device, dev->device) && quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && quirk_id_matches(quirk->subdevice, dev->subsystem_device)) - break; + break; return quirk; } @@ -1711,7 +1710,7 @@ static struct pciserial_board pci_boards[] __devinitdata = { }; static const struct pci_device_id softmodem_blacklist[] = { - { PCI_VDEVICE ( AL, 0x5457 ), }, /* ALi Corporation M5457 AC'97 Modem */ + { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ }; /* @@ -1724,13 +1723,13 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) { const struct pci_device_id *blacklist; int num_iomem, num_port, first_port = -1, i; - + /* * If it is not a communications device or the programming * interface is greater than 6, give up. * * (Should we try to make guesses for multiport serial devices - * later?) + * later?) */ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || @@ -1863,25 +1862,23 @@ pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) break; #ifdef SERIAL_DEBUG_PCI - printk("Setup PCI port: port %x, irq %d, type %d\n", + printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n", serial_port.iobase, serial_port.irq, serial_port.iotype); #endif - + priv->line[i] = serial8250_register_port(&serial_port); if (priv->line[i] < 0) { printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); break; } } - priv->nr = i; - return priv; - err_deinit: +err_deinit: if (quirk->exit) quirk->exit(dev); - err_out: +err_out: return priv; } EXPORT_SYMBOL_GPL(pciserial_init_ports); @@ -2171,22 +2168,22 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_b0_8_1843200_200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_bt_1_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_bt_2_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_bt_4_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_bt_2_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_bt_4_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_8_115200 }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -2201,11 +2198,11 @@ static struct pci_device_id serial_pci_tbl[] = { /* * VScom SPCOM800, from sl@s.pl */ - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_8_921600 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_4_921600 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_KEYSPAN, @@ -2223,27 +2220,27 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_b2_4_115200 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, pbn_b2_4_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, pbn_b2_8_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, pbn_b2_16_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, pbn_b2_16_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIRAS, - PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, pbn_b2_4_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_CHASE_PCIRAS, - PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, + PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, pbn_b2_8_460800 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_EXSYS, @@ -2269,10 +2266,12 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b1_8_115200 }, { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0, + PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, + 0, 0, pbn_b0_4_921600 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, + 0, 0, pbn_b0_4_1152000 }, /* @@ -2312,7 +2311,7 @@ static struct pci_device_id serial_pci_tbl[] = { * Digitan DS560-558, from jimd@esoft.com */ { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b1_1_115200 }, /* @@ -2320,16 +2319,16 @@ static struct pci_device_id serial_pci_tbl[] = { * The 400L and 800L have a custom setup quirk. */ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_1_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_2_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_4_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_4_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, PCI_ANY_ID, PCI_ANY_ID, 0, 0, |