diff options
author | Geert Uytterhoeven <geert+renesas@linux-m68k.org> | 2014-01-12 10:27:37 (GMT) |
---|---|---|
committer | Mark Brown <broonie@linaro.org> | 2014-01-13 12:10:01 (GMT) |
commit | 6ab4865b7e34e707857107ca76c0b98d87a992dd (patch) | |
tree | adc9e67cb9e5a26a0404a23b606926dd6a94b5a7 /drivers/spi/spi-rspi.c | |
parent | e2e5ed79fed3a9be3846651ca5b463658f8ff6c9 (diff) | |
download | linux-6ab4865b7e34e707857107ca76c0b98d87a992dd.tar.xz |
spi: rspi: Add more RSPI register documentation
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'drivers/spi/spi-rspi.c')
-rw-r--r-- | drivers/spi/spi-rspi.c | 185 |
1 files changed, 99 insertions, 86 deletions
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 627126a..1f69343 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -37,27 +37,29 @@ #include <linux/spi/spi.h> #include <linux/spi/rspi.h> -#define RSPI_SPCR 0x00 -#define RSPI_SSLP 0x01 -#define RSPI_SPPCR 0x02 -#define RSPI_SPSR 0x03 -#define RSPI_SPDR 0x04 -#define RSPI_SPSCR 0x08 -#define RSPI_SPSSR 0x09 -#define RSPI_SPBR 0x0a -#define RSPI_SPDCR 0x0b -#define RSPI_SPCKD 0x0c -#define RSPI_SSLND 0x0d -#define RSPI_SPND 0x0e -#define RSPI_SPCR2 0x0f -#define RSPI_SPCMD0 0x10 -#define RSPI_SPCMD1 0x12 -#define RSPI_SPCMD2 0x14 -#define RSPI_SPCMD3 0x16 -#define RSPI_SPCMD4 0x18 -#define RSPI_SPCMD5 0x1a -#define RSPI_SPCMD6 0x1c -#define RSPI_SPCMD7 0x1e +#define RSPI_SPCR 0x00 /* Control Register */ +#define RSPI_SSLP 0x01 /* Slave Select Polarity Register */ +#define RSPI_SPPCR 0x02 /* Pin Control Register */ +#define RSPI_SPSR 0x03 /* Status Register */ +#define RSPI_SPDR 0x04 /* Data Register */ +#define RSPI_SPSCR 0x08 /* Sequence Control Register */ +#define RSPI_SPSSR 0x09 /* Sequence Status Register */ +#define RSPI_SPBR 0x0a /* Bit Rate Register */ +#define RSPI_SPDCR 0x0b /* Data Control Register */ +#define RSPI_SPCKD 0x0c /* Clock Delay Register */ +#define RSPI_SSLND 0x0d /* Slave Select Negation Delay Register */ +#define RSPI_SPND 0x0e /* Next-Access Delay Register */ +#define RSPI_SPCR2 0x0f /* Control Register 2 */ +#define RSPI_SPCMD0 0x10 /* Command Register 0 */ +#define RSPI_SPCMD1 0x12 /* Command Register 1 */ +#define RSPI_SPCMD2 0x14 /* Command Register 2 */ +#define RSPI_SPCMD3 0x16 /* Command Register 3 */ +#define RSPI_SPCMD4 0x18 /* Command Register 4 */ +#define RSPI_SPCMD5 0x1a /* Command Register 5 */ +#define RSPI_SPCMD6 0x1c /* Command Register 6 */ +#define RSPI_SPCMD7 0x1e /* Command Register 7 */ +#define RSPI_SPBFCR 0x20 /* Buffer Control Register */ +#define RSPI_SPBFDR 0x22 /* Buffer Data Count Setting Register */ /*qspi only */ #define QSPI_SPBFCR 0x18 @@ -67,87 +69,98 @@ #define QSPI_SPBMUL2 0x24 #define QSPI_SPBMUL3 0x28 -/* SPCR */ -#define SPCR_SPRIE 0x80 -#define SPCR_SPE 0x40 -#define SPCR_SPTIE 0x20 -#define SPCR_SPEIE 0x10 -#define SPCR_MSTR 0x08 -#define SPCR_MODFEN 0x04 -#define SPCR_TXMD 0x02 -#define SPCR_SPMS 0x01 - -/* SSLP */ -#define SSLP_SSL1P 0x02 -#define SSLP_SSL0P 0x01 - -/* SPPCR */ -#define SPPCR_MOIFE 0x20 -#define SPPCR_MOIFV 0x10 +/* SPCR - Control Register */ +#define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */ +#define SPCR_SPE 0x40 /* Function Enable */ +#define SPCR_SPTIE 0x20 /* Transmit Interrupt Enable */ +#define SPCR_SPEIE 0x10 /* Error Interrupt Enable */ +#define SPCR_MSTR 0x08 /* Master/Slave Mode Select */ +#define SPCR_MODFEN 0x04 /* Mode Fault Error Detection Enable */ +/* RSPI on SH only */ +#define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */ +#define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */ + +/* SSLP - Slave Select Polarity Register */ +#define SSLP_SSL1P 0x02 /* SSL1 Signal Polarity Setting */ +#define SSLP_SSL0P 0x01 /* SSL0 Signal Polarity Setting */ + +/* SPPCR - Pin Control Register */ +#define SPPCR_MOIFE 0x20 /* MOSI Idle Value Fixing Enable */ +#define SPPCR_MOIFV 0x10 /* MOSI Idle Fixed Value */ #define SPPCR_SPOM 0x04 -#define SPPCR_SPLP2 0x02 -#define SPPCR_SPLP 0x01 - -/* SPSR */ -#define SPSR_SPRF 0x80 -#define SPSR_SPTEF 0x20 -#define SPSR_PERF 0x08 -#define SPSR_MODF 0x04 -#define SPSR_IDLNF 0x02 -#define SPSR_OVRF 0x01 - -/* SPSCR */ -#define SPSCR_SPSLN_MASK 0x07 - -/* SPSSR */ -#define SPSSR_SPECM_MASK 0x70 -#define SPSSR_SPCP_MASK 0x07 - -/* SPDCR */ -#define SPDCR_SPLW 0x20 -#define SPDCR_SPRDTD 0x10 +#define SPPCR_SPLP2 0x02 /* Loopback Mode 2 (non-inverting) */ +#define SPPCR_SPLP 0x01 /* Loopback Mode (inverting) */ + +/* SPSR - Status Register */ +#define SPSR_SPRF 0x80 /* Receive Buffer Full Flag */ +#define SPSR_TEND 0x40 /* Transmit End */ +#define SPSR_SPTEF 0x20 /* Transmit Buffer Empty Flag */ +#define SPSR_PERF 0x08 /* Parity Error Flag */ +#define SPSR_MODF 0x04 /* Mode Fault Error Flag */ +#define SPSR_IDLNF 0x02 /* RSPI Idle Flag */ +#define SPSR_OVRF 0x01 /* Overrun Error Flag */ + +/* SPSCR - Sequence Control Register */ +#define SPSCR_SPSLN_MASK 0x07 /* Sequence Length Specification */ + +/* SPSSR - Sequence Status Register */ +#define SPSSR_SPECM_MASK 0x70 /* Command Error Mask */ +#define SPSSR_SPCP_MASK 0x07 /* Command Pointer Mask */ + +/* SPDCR - Data Control Register */ +#define SPDCR_TXDMY 0x80 /* Dummy Data Transmission Enable */ +#define SPDCR_SPLW1 0x40 /* Access Width Specification (RZ) */ +#define SPDCR_SPLW0 0x20 /* Access Width Specification (RZ) */ +#define SPDCR_SPLLWORD (SPDCR_SPLW1 | SPDCR_SPLW0) +#define SPDCR_SPLWORD SPDCR_SPLW1 +#define SPDCR_SPLBYTE SPDCR_SPLW0 +#define SPDCR_SPLW 0x20 /* Access Width Specification (SH) */ +#define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select */ #define SPDCR_SLSEL1 0x08 #define SPDCR_SLSEL0 0x04 -#define SPDCR_SLSEL_MASK 0x0c +#define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select */ #define SPDCR_SPFC1 0x02 #define SPDCR_SPFC0 0x01 +#define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) */ -/* SPCKD */ -#define SPCKD_SCKDL_MASK 0x07 +/* SPCKD - Clock Delay Register */ +#define SPCKD_SCKDL_MASK 0x07 /* Clock Delay Setting (1-8) */ -/* SSLND */ -#define SSLND_SLNDL_MASK 0x07 +/* SSLND - Slave Select Negation Delay Register */ +#define SSLND_SLNDL_MASK 0x07 /* SSL Negation Delay Setting (1-8) */ -/* SPND */ -#define SPND_SPNDL_MASK 0x07 +/* SPND - Next-Access Delay Register */ +#define SPND_SPNDL_MASK 0x07 /* Next-Access Delay Setting (1-8) */ -/* SPCR2 */ -#define SPCR2_PTE 0x08 -#define SPCR2_SPIE 0x04 -#define SPCR2_SPOE 0x02 -#define SPCR2_SPPE 0x01 +/* SPCR2 - Control Register 2 */ +#define SPCR2_PTE 0x08 /* Parity Self-Test Enable */ +#define SPCR2_SPIE 0x04 /* Idle Interrupt Enable */ +#define SPCR2_SPOE 0x02 /* Odd Parity Enable (vs. Even) */ +#define SPCR2_SPPE 0x01 /* Parity Enable */ -/* SPCMDn */ -#define SPCMD_SCKDEN 0x8000 -#define SPCMD_SLNDEN 0x4000 -#define SPCMD_SPNDEN 0x2000 -#define SPCMD_LSBF 0x1000 -#define SPCMD_SPB_MASK 0x0f00 +/* SPCMDn - Command Registers */ +#define SPCMD_SCKDEN 0x8000 /* Clock Delay Setting Enable */ +#define SPCMD_SLNDEN 0x4000 /* SSL Negation Delay Setting Enable */ +#define SPCMD_SPNDEN 0x2000 /* Next-Access Delay Enable */ +#define SPCMD_LSBF 0x1000 /* LSB First */ +#define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */ #define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK) #define SPCMD_SPB_8BIT 0x0000 /* qspi only */ #define SPCMD_SPB_16BIT 0x0100 #define SPCMD_SPB_20BIT 0x0000 #define SPCMD_SPB_24BIT 0x0100 #define SPCMD_SPB_32BIT 0x0200 -#define SPCMD_SSLKP 0x0080 -#define SPCMD_SSLA_MASK 0x0030 -#define SPCMD_BRDV_MASK 0x000c -#define SPCMD_CPOL 0x0002 -#define SPCMD_CPHA 0x0001 - -/* SPBFCR */ -#define SPBFCR_TXRST 0x80 /* qspi only */ -#define SPBFCR_RXRST 0x40 /* qspi only */ +#define SPCMD_SSLKP 0x0080 /* SSL Signal Level Keeping */ +#define SPCMD_SSLA_MASK 0x0030 /* SSL Assert Signal Setting (RSPI) */ +#define SPCMD_BRDV_MASK 0x000c /* Bit Rate Division Setting */ +#define SPCMD_CPOL 0x0002 /* Clock Polarity Setting */ +#define SPCMD_CPHA 0x0001 /* Clock Phase Setting */ + +/* SPBFCR - Buffer Control Register */ +#define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset (qspi only) */ +#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset (qspi only) */ +#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */ +#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */ #define DUMMY_DATA 0x00 |