diff options
author | Mark Brown <broonie@linaro.org> | 2013-09-01 12:48:44 (GMT) |
---|---|---|
committer | Mark Brown <broonie@linaro.org> | 2013-09-01 12:48:44 (GMT) |
commit | b29bc3df37afa440290f4b8e50cf5dce429ce22f (patch) | |
tree | 2ba216f8d2e3157c535a3535d821133f977e7067 /drivers/spi | |
parent | c3dbe2b76a835fb4b2633645b0c49359b49eb128 (diff) | |
parent | 2e29db400c4898ff72e2ea87d262921df00f1c87 (diff) | |
download | linux-b29bc3df37afa440290f4b8e50cf5dce429ce22f.tar.xz |
Merge remote-tracking branch 'spi/topic/bitbang' into spi-next
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/spi-altera.c | 12 | ||||
-rw-r--r-- | drivers/spi/spi-bitbang.c | 260 | ||||
-rw-r--r-- | drivers/spi/spi-nuc900.c | 13 | ||||
-rw-r--r-- | drivers/spi/spi-xilinx.c | 16 |
4 files changed, 113 insertions, 188 deletions
diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c index 523f2f6..156eb88 100644 --- a/drivers/spi/spi-altera.c +++ b/drivers/spi/spi-altera.c @@ -103,16 +103,6 @@ static void altera_spi_chipsel(struct spi_device *spi, int value) } } -static int altera_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) -{ - return 0; -} - -static int altera_spi_setup(struct spi_device *spi) -{ - return 0; -} - static inline unsigned int hw_txbyte(struct altera_spi *hw, int count) { if (hw->tx) { @@ -224,7 +214,6 @@ static int altera_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->num_chipselect = 16; master->mode_bits = SPI_CS_HIGH; - master->setup = altera_spi_setup; hw = spi_master_get_devdata(master); platform_set_drvdata(pdev, hw); @@ -233,7 +222,6 @@ static int altera_spi_probe(struct platform_device *pdev) hw->bitbang.master = spi_master_get(master); if (!hw->bitbang.master) return err; - hw->bitbang.setup_transfer = altera_spi_setupxfer; hw->bitbang.chipselect = altera_spi_chipsel; hw->bitbang.txrx_bufs = altera_spi_txrx; diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index a63d7da..e3946e4 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -255,150 +255,140 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) * Drivers can provide word-at-a-time i/o primitives, or provide * transfer-at-a-time ones to leverage dma or fifo hardware. */ -static void bitbang_work(struct work_struct *work) + +static int spi_bitbang_prepare_hardware(struct spi_master *spi) { - struct spi_bitbang *bitbang = - container_of(work, struct spi_bitbang, work); + struct spi_bitbang *bitbang; unsigned long flags; - struct spi_message *m, *_m; + + bitbang = spi_master_get_devdata(spi); spin_lock_irqsave(&bitbang->lock, flags); bitbang->busy = 1; - list_for_each_entry_safe(m, _m, &bitbang->queue, queue) { - struct spi_device *spi; - unsigned nsecs; - struct spi_transfer *t = NULL; - unsigned tmp; - unsigned cs_change; - int status; - int do_setup = -1; - - list_del(&m->queue); - spin_unlock_irqrestore(&bitbang->lock, flags); - - /* FIXME this is made-up ... the correct value is known to - * word-at-a-time bitbang code, and presumably chipselect() - * should enforce these requirements too? - */ - nsecs = 100; + spin_unlock_irqrestore(&bitbang->lock, flags); - spi = m->spi; - tmp = 0; - cs_change = 1; - status = 0; + return 0; +} - list_for_each_entry (t, &m->transfers, transfer_list) { - - /* override speed or wordsize? */ - if (t->speed_hz || t->bits_per_word) - do_setup = 1; - - /* init (-1) or override (1) transfer params */ - if (do_setup != 0) { - status = bitbang->setup_transfer(spi, t); - if (status < 0) - break; - if (do_setup == -1) - do_setup = 0; - } - - /* set up default clock polarity, and activate chip; - * this implicitly updates clock and spi modes as - * previously recorded for this device via setup(). - * (and also deselects any other chip that might be - * selected ...) - */ - if (cs_change) { - bitbang->chipselect(spi, BITBANG_CS_ACTIVE); - ndelay(nsecs); - } - cs_change = t->cs_change; - if (!t->tx_buf && !t->rx_buf && t->len) { - status = -EINVAL; - break; - } +static int spi_bitbang_transfer_one(struct spi_master *master, + struct spi_message *m) +{ + struct spi_bitbang *bitbang; + unsigned nsecs; + struct spi_transfer *t = NULL; + unsigned cs_change; + int status; + int do_setup = -1; + struct spi_device *spi = m->spi; + + bitbang = spi_master_get_devdata(master); + + /* FIXME this is made-up ... the correct value is known to + * word-at-a-time bitbang code, and presumably chipselect() + * should enforce these requirements too? + */ + nsecs = 100; - /* transfer data. the lower level code handles any - * new dma mappings it needs. our caller always gave - * us dma-safe buffers. - */ - if (t->len) { - /* REVISIT dma API still needs a designated - * DMA_ADDR_INVALID; ~0 might be better. - */ - if (!m->is_dma_mapped) - t->rx_dma = t->tx_dma = 0; - status = bitbang->txrx_bufs(spi, t); - } - if (status > 0) - m->actual_length += status; - if (status != t->len) { - /* always report some kind of error */ - if (status >= 0) - status = -EREMOTEIO; + cs_change = 1; + status = 0; + + list_for_each_entry (t, &m->transfers, transfer_list) { + + /* override speed or wordsize? */ + if (t->speed_hz || t->bits_per_word) + do_setup = 1; + + /* init (-1) or override (1) transfer params */ + if (do_setup != 0) { + status = bitbang->setup_transfer(spi, t); + if (status < 0) break; - } - status = 0; - - /* protocol tweaks before next transfer */ - if (t->delay_usecs) - udelay(t->delay_usecs); - - if (cs_change && !list_is_last(&t->transfer_list, &m->transfers)) { - /* sometimes a short mid-message deselect of the chip - * may be needed to terminate a mode or command - */ - ndelay(nsecs); - bitbang->chipselect(spi, BITBANG_CS_INACTIVE); - ndelay(nsecs); - } + if (do_setup == -1) + do_setup = 0; } - m->status = status; - m->complete(m->context); + /* set up default clock polarity, and activate chip; + * this implicitly updates clock and spi modes as + * previously recorded for this device via setup(). + * (and also deselects any other chip that might be + * selected ...) + */ + if (cs_change) { + bitbang->chipselect(spi, BITBANG_CS_ACTIVE); + ndelay(nsecs); + } + cs_change = t->cs_change; + if (!t->tx_buf && !t->rx_buf && t->len) { + status = -EINVAL; + break; + } - /* normally deactivate chipselect ... unless no error and - * cs_change has hinted that the next message will probably - * be for this chip too. + /* transfer data. the lower level code handles any + * new dma mappings it needs. our caller always gave + * us dma-safe buffers. */ - if (!(status == 0 && cs_change)) { + if (t->len) { + /* REVISIT dma API still needs a designated + * DMA_ADDR_INVALID; ~0 might be better. + */ + if (!m->is_dma_mapped) + t->rx_dma = t->tx_dma = 0; + status = bitbang->txrx_bufs(spi, t); + } + if (status > 0) + m->actual_length += status; + if (status != t->len) { + /* always report some kind of error */ + if (status >= 0) + status = -EREMOTEIO; + break; + } + status = 0; + + /* protocol tweaks before next transfer */ + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (cs_change && !list_is_last(&t->transfer_list, &m->transfers)) { + /* sometimes a short mid-message deselect of the chip + * may be needed to terminate a mode or command + */ ndelay(nsecs); bitbang->chipselect(spi, BITBANG_CS_INACTIVE); ndelay(nsecs); } + } + + m->status = status; - spin_lock_irqsave(&bitbang->lock, flags); + /* normally deactivate chipselect ... unless no error and + * cs_change has hinted that the next message will probably + * be for this chip too. + */ + if (!(status == 0 && cs_change)) { + ndelay(nsecs); + bitbang->chipselect(spi, BITBANG_CS_INACTIVE); + ndelay(nsecs); } - bitbang->busy = 0; - spin_unlock_irqrestore(&bitbang->lock, flags); + + spi_finalize_current_message(master); + + return status; } -/** - * spi_bitbang_transfer - default submit to transfer queue - */ -int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) +static int spi_bitbang_unprepare_hardware(struct spi_master *spi) { - struct spi_bitbang *bitbang; + struct spi_bitbang *bitbang; unsigned long flags; - int status = 0; - m->actual_length = 0; - m->status = -EINPROGRESS; - - bitbang = spi_master_get_devdata(spi->master); + bitbang = spi_master_get_devdata(spi); spin_lock_irqsave(&bitbang->lock, flags); - if (!spi->max_speed_hz) - status = -ENETDOWN; - else { - list_add_tail(&m->queue, &bitbang->queue); - queue_work(bitbang->workqueue, &bitbang->work); - } + bitbang->busy = 0; spin_unlock_irqrestore(&bitbang->lock, flags); - return status; + return 0; } -EXPORT_SYMBOL_GPL(spi_bitbang_transfer); /*----------------------------------------------------------------------*/ @@ -428,20 +418,22 @@ EXPORT_SYMBOL_GPL(spi_bitbang_transfer); int spi_bitbang_start(struct spi_bitbang *bitbang) { struct spi_master *master = bitbang->master; - int status; if (!master || !bitbang->chipselect) return -EINVAL; - INIT_WORK(&bitbang->work, bitbang_work); spin_lock_init(&bitbang->lock); - INIT_LIST_HEAD(&bitbang->queue); if (!master->mode_bits) master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; - if (!master->transfer) - master->transfer = spi_bitbang_transfer; + if (master->transfer || master->transfer_one_message) + return -EINVAL; + + master->prepare_transfer_hardware = spi_bitbang_prepare_hardware; + master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware; + master->transfer_one_message = spi_bitbang_transfer_one; + if (!bitbang->txrx_bufs) { bitbang->use_dma = 0; bitbang->txrx_bufs = spi_bitbang_bufs; @@ -452,34 +444,12 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) master->setup = spi_bitbang_setup; master->cleanup = spi_bitbang_cleanup; } - } else if (!master->setup) - return -EINVAL; - if (master->transfer == spi_bitbang_transfer && - !bitbang->setup_transfer) - return -EINVAL; - - /* this task is the only thing to touch the SPI bits */ - bitbang->busy = 0; - bitbang->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (bitbang->workqueue == NULL) { - status = -EBUSY; - goto err1; } /* driver may get busy before register() returns, especially * if someone registered boardinfo for devices */ - status = spi_register_master(master); - if (status < 0) - goto err2; - - return status; - -err2: - destroy_workqueue(bitbang->workqueue); -err1: - return status; + return spi_register_master(master); } EXPORT_SYMBOL_GPL(spi_bitbang_start); @@ -490,10 +460,6 @@ int spi_bitbang_stop(struct spi_bitbang *bitbang) { spi_unregister_master(bitbang->master); - WARN_ON(!list_empty(&bitbang->queue)); - - destroy_workqueue(bitbang->workqueue); - return 0; } EXPORT_SYMBOL_GPL(spi_bitbang_stop); diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c index 150d854..2ad3d74 100644 --- a/drivers/spi/spi-nuc900.c +++ b/drivers/spi/spi-nuc900.c @@ -174,17 +174,6 @@ static void nuc900_spi_gobusy(struct nuc900_spi *hw) spin_unlock_irqrestore(&hw->lock, flags); } -static int nuc900_spi_setupxfer(struct spi_device *spi, - struct spi_transfer *t) -{ - return 0; -} - -static int nuc900_spi_setup(struct spi_device *spi) -{ - return 0; -} - static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count) { return hw->tx ? hw->tx[count] : 0; @@ -377,10 +366,8 @@ static int nuc900_spi_probe(struct platform_device *pdev) master->num_chipselect = hw->pdata->num_cs; master->bus_num = hw->pdata->bus_num; hw->bitbang.master = hw->master; - hw->bitbang.setup_transfer = nuc900_spi_setupxfer; hw->bitbang.chipselect = nuc900_spi_chipsel; hw->bitbang.txrx_bufs = nuc900_spi_txrx; - hw->bitbang.master->setup = nuc900_spi_setup; hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (hw->res == NULL) { diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index 09a9428..fb56fcf 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -233,21 +233,6 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi, return 0; } -static int xilinx_spi_setup(struct spi_device *spi) -{ - /* always return 0, we can not check the number of bits. - * There are cases when SPI setup is called before any driver is - * there, in that case the SPI core defaults to 8 bits, which we - * do not support in some cases. But if we return an error, the - * SPI device would not be registered and no driver can get hold of it - * When the driver is there, it will call SPI setup again with the - * correct number of bits per transfer. - * If a driver setups with the wrong bit number, it will fail when - * it tries to do a transfer - */ - return 0; -} - static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi) { u8 sr; @@ -375,7 +360,6 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, xspi->bitbang.chipselect = xilinx_spi_chipselect; xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer; xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs; - xspi->bitbang.master->setup = xilinx_spi_setup; init_completion(&xspi->done); if (!request_mem_region(mem->start, resource_size(mem), |