diff options
author | Xenia Ragiadakou <burzalodowa@gmail.com> | 2013-06-15 04:29:06 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-06-17 22:45:44 (GMT) |
commit | d75340eb052c8fb9be7fe8565accd836fb755a66 (patch) | |
tree | 65fc0a0ef2f3083418dba0ee2c71199eaad19ac6 /drivers/staging/rtl8192u/r819xU_phy.c | |
parent | eadb188c780f0d02bf2f828191cb8d2917ef3d8c (diff) | |
download | linux-d75340eb052c8fb9be7fe8565accd836fb755a66.tar.xz |
staging: rtl8192u: remove commented-out code in r819xU_phy.c
This patch removes commented-out code to improve code
readability.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging/rtl8192u/r819xU_phy.c')
-rw-r--r-- | drivers/staging/rtl8192u/r819xU_phy.c | 51 |
1 files changed, 2 insertions, 49 deletions
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c index 1dceac4..0d0f622 100644 --- a/drivers/staging/rtl8192u/r819xU_phy.c +++ b/drivers/staging/rtl8192u/r819xU_phy.c @@ -215,8 +215,6 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; Offset &= 0x3f; - //spin_lock_irqsave(&priv->rf_lock, flags); -// down(&priv->rf_sem); if (priv->rf_chip == RF_8256) { if (Offset >= 31) { @@ -257,8 +255,6 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath (priv->RfReg0Value[eRFPath] << 16)); } } - //spin_unlock_irqrestore(&priv->rf_lock, flags); -// up(&priv->rf_sem); return; } @@ -277,7 +273,6 @@ void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 { struct r8192_priv *priv = ieee80211_priv(dev); u32 Original_Value, BitShift, New_Value; -// u8 time = 0; if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) return; @@ -356,18 +351,15 @@ phy_FwRFSerialRead( u32 Data = 0; u8 time = 0; u32 tmp; - //DbgPrint("FW RF CTRL\n\r"); /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can not execute the scheme in the initial step. Otherwise, RF-R/W will waste much time. This is only for site survey. */ // 1. Read operation need not insert data. bit 0-11 - //Data &= bMask12Bits; // 2. Write RF register address. Bit 12-19 Data |= ((Offset&0xFF)<<12); // 3. Write RF path. bit 20-21 Data |= ((eRFPath&0x3)<<20); // 4. Set RF read indicator. bit 22=0 - //Data |= 0x00000; // 5. Trigger Fw to operate the command. bit 31 Data |= 0x80000000; // 6. We can not execute read operation if bit 31 is 1. @@ -375,7 +367,6 @@ phy_FwRFSerialRead( while (tmp & 0x80000000) { // If FW can not finish RF-R/W for more than ?? times. We must reset FW. if (time++ < 100) { - //DbgPrint("FW not finish RF-R Time=%d\n\r", time); udelay(10); read_nic_dword(dev, QPNR, &tmp); } else { @@ -389,7 +380,6 @@ phy_FwRFSerialRead( while (tmp & 0x80000000) { // If FW can not finish RF-R/W for more than ?? times. We must reset FW. if (time++ < 100) { - //DbgPrint("FW not finish RF-W Time=%d\n\r", time); udelay(10); read_nic_dword(dev, QPNR, &tmp); } else { @@ -419,13 +409,11 @@ phy_FwRFSerialWrite( u8 time = 0; u32 tmp; - //DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data); /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can not execute the scheme in the initial step. Otherwise, RF-R/W will waste much time. This is only for site survey. */ // 1. Set driver write bit and 12 bit data. bit 0-11 - //Data &= bMask12Bits; // Done by uper layer. // 2. Write RF register address. bit 12-19 Data |= ((Offset&0xFF)<<12); // 3. Write RF path. bit 20-21 @@ -440,7 +428,6 @@ phy_FwRFSerialWrite( while (tmp & 0x80000000) { // If FW can not finish RF-R/W for more than ?? times. We must reset FW. if (time++ < 100) { - //DbgPrint("FW not finish RF-W Time=%d\n\r", time); udelay(10); read_nic_dword(dev, QPNR, &tmp); } else { @@ -453,7 +440,6 @@ phy_FwRFSerialWrite( /* 2007/11/02 MH Acoording to test, we must delay 20us to wait firmware to finish RF write operation. */ /* 2008/01/17 MH We support delay in firmware side now. */ - //delay_us(20); } /* phy_FwRFSerialWrite */ @@ -486,8 +472,6 @@ void rtl8192_phy_configmac(struct net_device *dev) for (i = 0; i<dwArrayLen; i=i+3) { if (pdwArray[i] == 0x318) { pdwArray[i+2] = 0x00000800; - //DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n", - // ptrArray[i], ptrArray[i+1], ptrArray[i+2]); } RT_TRACE(COMP_DBG, "The Rtl8190MACPHY_Array[0] is %x Rtl8190MACPHY_Array[1] is %x Rtl8190MACPHY_Array[2] is %x\n", @@ -660,8 +644,6 @@ void rtl8192_InitBBRFRegDef(struct net_device *dev) * ***************************************************************************/ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath) { -// struct r8192_priv *priv = ieee80211_priv(dev); -// BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; u8 ret = 0; u32 i, CheckTimes = 4, dwRegRead = 0; u32 WriteAddr[4]; @@ -856,8 +838,6 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel) PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); break; default: -// case RF_8225: -// case RF_8258: RT_TRACE((COMP_PHY|COMP_ERR), "error RF chipID(8225 or 8258) in function %s()\n", __FUNCTION__); break; } @@ -878,8 +858,6 @@ void rtl8192_phy_RFConfig(struct net_device *dev) case RF_8256: PHY_RF8256_Config(dev); break; - // case RF_8225: - // case RF_8258: default: RT_TRACE(COMP_ERR, "error chip id\n"); break; @@ -909,7 +887,6 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E { int i; - //u32* pRFArray; u8 ret = 0; switch (eRFPath) { @@ -1015,7 +992,6 @@ void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel) bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState) { bool bResult = true; -// u8 eRFPath; struct r8192_priv *priv = ieee80211_priv(dev); if (eRFPowerState == priv->ieee80211->eRFPowerState) @@ -1180,7 +1156,6 @@ u8 rtl8192_phy_SetSwChnlCmdArray( u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u8 *step, u32 *delay) { struct r8192_priv *priv = ieee80211_priv(dev); -// PCHANNEL_ACCESS_SETTING pChnlAccessSetting; SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; u32 PreCommonCmdCnt; SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT]; @@ -1188,13 +1163,9 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT]; u32 RfDependCmdCnt; SwChnlCmd *CurrentCmd = NULL; - //RF90_RADIO_PATH_E eRFPath; u8 eRFPath; -// u32 RfRetVal; -// u8 RetryCnt; RT_TRACE(COMP_CH, "====>%s()====stage:%d, step:%d, channel:%d\n", __FUNCTION__, *stage, *step, channel); -// RT_ASSERT(IsLegalChannel(Adapter, channel), ("illegal channel: %d\n", channel)); if (!IsLegalChannel(priv->ieee80211, channel)) { RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel); return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop. @@ -1202,11 +1173,6 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u //FIXME:need to check whether channel is legal or not here.WB - //for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++) -// for(eRFPath = 0; eRFPath <RF90_PATH_MAX; eRFPath++) -// { -// if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) -// continue; // <1> Fill up pre common command. PreCommonCmdCnt = 0; rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, @@ -1305,7 +1271,6 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u break; } while (true); -// }/*for(Number of RF paths)*/ (*delay)=CurrentCmd->msDelay; (*step)++; @@ -1326,8 +1291,6 @@ void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel) u32 delay = 0; while (!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay)) { - // if(delay>0) - // msleep(delay);//or mdelay? need further consideration if (!priv->up) break; } @@ -1369,8 +1332,6 @@ u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel) if (priv->SwChnlInProgress) return false; -// if(pHalData->SetBWModeInProgress) -// return; //-------------------------------------------- switch (priv->ieee80211->mode) { case WIRELESS_MODE_A: @@ -1404,12 +1365,8 @@ u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel) priv->SwChnlStage=0; priv->SwChnlStep=0; -// schedule_work(&(priv->SwChnlWorkItem)); -// rtl8192_SwChnl_WorkItem(dev); - if (priv->up) { -// queue_work(priv->priv_wq,&(priv->SwChnlWorkItem)); + if (priv->up) rtl8192_SwChnl_WorkItem(dev); - } priv->SwChnlInProgress = false; return true; @@ -1582,8 +1539,6 @@ void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EX else priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE; - //queue_work(priv->priv_wq, &(priv->SetBWModeWorkItem)); - // schedule_work(&(priv->SetBWModeWorkItem)); rtl8192_SetBWModeWorkItem(dev); } @@ -1614,7 +1569,7 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) switch (Operation) { case IG_Backup: RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n"); - initial_gain = SCAN_RX_INITIAL_GAIN;//priv->DefaultInitialGain[0];// + initial_gain = SCAN_RX_INITIAL_GAIN; BitMask = bMaskByte0; if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF @@ -1664,9 +1619,7 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) #ifdef RTL8192E SetTxPowerLevel8190(Adapter,priv->CurrentChannel); #endif -//#ifdef RTL8192U rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel); -//#endif if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON |