Merge tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 4.9-rc1.

  There are a lot of patches in here, the majority due to the
  drivers/staging/greybus/ subsystem being merged in with full
  development history that went back a few years, in order to preserve
  the work that those developers did over time.

  Lots and lots of tiny cleanups happened in the tree as well, due to
  the Outreachy application process and lots of other developers showing
  up for the first time to clean code up.  Along with those changes, we
  deleted a wireless driver, and added a raspberrypi driver (currently
  marked broken), and lots of new iio drivers.

  Overall the tree still shrunk with more lines removed than added,
  about 10 thousand lines removed in total. Full details are in the very
  long shortlog below.

  All of this has been in the linux-next tree with no issues. There will
  be some merge problems with other subsystem trees, but those are all
  minor problems and shouldn't be hard to work out when they happen
  (MAINTAINERS and some lustre build problems with the IB tree)"

And furter from me asking for clarification about greybus:
 "Right now there is a phone from Motorola shipping with this code (a
  slightly older version, but the same tree), so even though Ara is not
  alive in the same form, the functionality is happening. We are working
  with the developers of that phone to merge the newer stuff in with
  their fork so they can use the upstream version in future versions of
  their phone product line.

  Toshiba has at least one chip shipping in their catalog that
  needs/uses this protocol over a Unipro link, and rumor has it that
  there might be more in the future.

  There are also other users of the greybus protocols, there is a talk
  next week at ELC that shows how it is being used across a network
  connection to control a device, and previous ELC talks have showed the
  protocol stack being used over USB to drive embedded Linux boards.
  I've also talked to some people who are starting to work to add a host
  controller driver to control arduinos as the greybus PHY protocols are
  very useful to control a serial/i2c/spio/whatever device across a
  random physical link, as it is a way to have a self-describing device
  be attached to a host without needing manual configuration.

  So yes, people are using it, and there is still the chance that it
  will show up in a phone/laptop/tablet/whatever from Google in the
  future as well, the tech isn't dead, even if the original large phone
  project happens to be"

* tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits)
  Staging: fbtft: Fix bug in fbtft-core
  staging: rtl8188eu: fix double unlock error in rtw_resume_process()
  staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro
  staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro
  staging:r8188eu: remove GEN_EVT_CODE macro
  staging:r8188eu: remove GEN_CMD_CODE macro
  staging:r8188eu: remove pkt_newalloc member of the recv_buf structure
  staging:r8188eu: remove rtw_handle_dualmac declaration
  staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros
  staging:r8188eu: change rtl8188e_process_phy_info function argument type
  Staging: fsl-mc: Remove blank lines
  Staging: fsl-mc: Fix unaligned * in block comments
  Staging: comedi: Align the * in block comments
  Staging : ks7010 : Fix block comments warninig
  Staging: vt6655: Remove explicit NULL comparison using Coccinelle
  staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants
  staging: rtl8188eu: core: rtw_xmit: Move constant of the right side
  staging: dgnc: Fix lines longer than 80 characters
  Staging: dgnc: constify attribute_group structures
  Staging: most: hdm-dim2: constify attribute_group structures
  ...

1 files changed, 0 insertions, 237 deletions

diff --git a/drivers/staging/rtl8723au/include/rtw_io.h b/drivers/staging/rtl8723au/include/rtw_io.h
deleted file mode 100644
index c8119e2..0000000
--- a/drivers/staging/rtl8723au/include/rtw_io.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- ******************************************************************************/
-
-#ifndef _RTW_IO_H_
-#define _RTW_IO_H_
-
-#include <osdep_service.h>
-#include <osdep_intf.h>
-
-#include <asm/byteorder.h>
-#include <linux/semaphore.h>
-#include <linux/list.h>
-/* include <linux/smp_lock.h> */
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-
-#include <linux/usb.h>
-#include <linux/usb/ch9.h>
-
-#define rtw_usb_buffer_alloc(dev, size, dma) usb_alloc_coherent((dev), (size), (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL), (dma))
-#define rtw_usb_buffer_free(dev, size, addr, dma) usb_free_coherent((dev), (size), (addr), (dma))
-
-#define NUM_IOREQ		8
-
-#define MAX_PROT_SZ	(64-16)
-
-#define _IOREADY			0
-#define _IO_WAIT_COMPLETE   1
-#define _IO_WAIT_RSP        2
-
-/*  IO COMMAND TYPE */
-#define _IOSZ_MASK_		(0x7F)
-#define _IO_WRITE_		BIT(7)
-#define _IO_FIXED_		BIT(8)
-#define _IO_BURST_		BIT(9)
-#define _IO_BYTE_		BIT(10)
-#define _IO_HW_			BIT(11)
-#define _IO_WORD_		BIT(12)
-#define _IO_SYNC_		BIT(13)
-#define _IO_CMDMASK_	(0x1F80)
-
-
-/*
-	For prompt mode accessing, caller shall free io_req
-	Otherwise, io_handler will free io_req
-*/
-
-
-
-/*  IO STATUS TYPE */
-#define _IO_ERR_		BIT(2)
-#define _IO_SUCCESS_	BIT(1)
-#define _IO_DONE_		BIT(0)
-
-
-#define IO_RD32			(_IO_SYNC_ | _IO_WORD_)
-#define IO_RD16			(_IO_SYNC_ | _IO_HW_)
-#define IO_RD8			(_IO_SYNC_ | _IO_BYTE_)
-
-#define IO_RD32_ASYNC	(_IO_WORD_)
-#define IO_RD16_ASYNC	(_IO_HW_)
-#define IO_RD8_ASYNC	(_IO_BYTE_)
-
-#define IO_WR32			(_IO_WRITE_ | _IO_SYNC_ | _IO_WORD_)
-#define IO_WR16			(_IO_WRITE_ | _IO_SYNC_ | _IO_HW_)
-#define IO_WR8			(_IO_WRITE_ | _IO_SYNC_ | _IO_BYTE_)
-
-#define IO_WR32_ASYNC	(_IO_WRITE_ | _IO_WORD_)
-#define IO_WR16_ASYNC	(_IO_WRITE_ | _IO_HW_)
-#define IO_WR8_ASYNC	(_IO_WRITE_ | _IO_BYTE_)
-
-/*
-
-	Only Sync. burst accessing is provided.
-
-*/
-
-#define IO_WR_BURST(x)		(_IO_WRITE_ | _IO_SYNC_ | _IO_BURST_ | ( (x) & _IOSZ_MASK_))
-#define IO_RD_BURST(x)		(_IO_SYNC_ | _IO_BURST_ | ( (x) & _IOSZ_MASK_))
-
-
-
-/* below is for the intf_option bit defition... */
-
-#define _INTF_ASYNC_	BIT(0)	/* support async io */
-
-struct intf_priv;
-
-struct io_req {
-	struct list_head	list;
-	u32	addr;
-	volatile u32	val;
-	u32	command;
-	u32	status;
-	u8	*pbuf;
-	struct semaphore	sema;
-
-	void (*_async_io_callback)(struct rtw_adapter *padater, struct io_req *pio_req, u8 *cnxt);
-	u8 *cnxt;
-};
-
-struct reg_protocol_rd {
-
-#ifdef __LITTLE_ENDIAN
-
-	/* DW1 */
-	u32		NumOfTrans:4;
-	u32		Reserved1:4;
-	u32		Reserved2:24;
-	/* DW2 */
-	u32		ByteCount:7;
-	u32		WriteEnable:1;		/* 0:read, 1:write */
-	u32		FixOrContinuous:1;	/* 0:continuous, 1: Fix */
-	u32		BurstMode:1;
-	u32		Byte1Access:1;
-	u32		Byte2Access:1;
-	u32		Byte4Access:1;
-	u32		Reserved3:3;
-	u32		Reserved4:16;
-	/* DW3 */
-	u32		BusAddress;
-	/* DW4 */
-	/* u32		Value; */
-#else
-
-
-/* DW1 */
-	u32 Reserved1  :4;
-	u32 NumOfTrans :4;
-
-	u32 Reserved2  :24;
-
-	/* DW2 */
-	u32 WriteEnable : 1;
-	u32 ByteCount :7;
-
-
-	u32 Reserved3 : 3;
-	u32 Byte4Access : 1;
-
-	u32 Byte2Access : 1;
-	u32 Byte1Access : 1;
-	u32 BurstMode :1 ;
-	u32 FixOrContinuous : 1;
-
-	u32 Reserved4 : 16;
-
-	/* DW3 */
-	u32		BusAddress;
-
-	/* DW4 */
-	/* u32		Value; */
-
-#endif
-
-};
-
-
-struct reg_protocol_wt {
-
-
-#ifdef __LITTLE_ENDIAN
-
-	/* DW1 */
-	u32		NumOfTrans:4;
-	u32		Reserved1:4;
-	u32		Reserved2:24;
-	/* DW2 */
-	u32		ByteCount:7;
-	u32		WriteEnable:1;		/* 0:read, 1:write */
-	u32		FixOrContinuous:1;	/* 0:continuous, 1: Fix */
-	u32		BurstMode:1;
-	u32		Byte1Access:1;
-	u32		Byte2Access:1;
-	u32		Byte4Access:1;
-	u32		Reserved3:3;
-	u32		Reserved4:16;
-	/* DW3 */
-	u32		BusAddress;
-	/* DW4 */
-	u32		Value;
-
-#else
-	/* DW1 */
-	u32 Reserved1  :4;
-	u32 NumOfTrans :4;
-
-	u32 Reserved2  :24;
-
-	/* DW2 */
-	u32 WriteEnable : 1;
-	u32 ByteCount :7;
-
-	u32 Reserved3 : 3;
-	u32 Byte4Access : 1;
-
-	u32 Byte2Access : 1;
-	u32 Byte1Access : 1;
-	u32 BurstMode :1 ;
-	u32 FixOrContinuous : 1;
-
-	u32 Reserved4 : 16;
-
-	/* DW3 */
-	u32		BusAddress;
-
-	/* DW4 */
-	u32		Value;
-
-#endif
-
-};
-
-#define PlatformEFIOWrite1Byte(_a, _b, _c)		\
-	rtl8723au_write8(_a, _b, _c)
-#define PlatformEFIOWrite2Byte(_a, _b, _c)		\
-	rtl8723au_write16(_a, _b, _c)
-#define PlatformEFIOWrite4Byte(_a, _b, _c)		\
-	rtl8723au_write32(_a, _b, _c)
-
-#define PlatformEFIORead1Byte(_a, _b)		rtl8723au_read8(_a, _b)
-#define PlatformEFIORead2Byte(_a, _b)		rtl8723au_read16(_a, _b)
-#define PlatformEFIORead4Byte(_a, _b)		rtl8723au_read32(_a, _b)
-
-#endif	/* _RTL8711_IO_H_ */