diff options
author | Peter Meerwald <pmeerw@pmeerw.net> | 2012-05-16 16:22:05 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-05-16 20:28:09 (GMT) |
commit | 16b91a40eaa98e63cc4390a86fde2daf638625e8 (patch) | |
tree | addd37e21d7de7b8584768e55d1beb935dacb511 /drivers/staging | |
parent | d32ec5518f728765983b18ec86b8de4a85115d62 (diff) | |
download | linux-16b91a40eaa98e63cc4390a86fde2daf638625e8.tar.xz |
staging: iio: rename and prefix CONSTANTs to distinguish between HMC5843 and HMC5883
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging')
-rw-r--r-- | drivers/staging/iio/magnetometer/hmc5843.c | 128 |
1 files changed, 71 insertions, 57 deletions
diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c index 3e6e8c0..27c5521 100644 --- a/drivers/staging/iio/magnetometer/hmc5843.c +++ b/drivers/staging/iio/magnetometer/hmc5843.c @@ -25,8 +25,6 @@ #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> -#define HMC5843_I2C_ADDRESS 0x1E - #define HMC5843_CONFIG_REG_A 0x00 #define HMC5843_CONFIG_REG_B 0x01 #define HMC5843_MODE_REG 0x02 @@ -36,65 +34,80 @@ #define HMC5843_DATA_OUT_Y_LSB_REG 0x06 #define HMC5843_DATA_OUT_Z_MSB_REG 0x07 #define HMC5843_DATA_OUT_Z_LSB_REG 0x08 +/* Beware: Y and Z are exchanged on HMC5883 */ +#define HMC5883_DATA_OUT_Z_MSB_REG 0x05 +#define HMC5883_DATA_OUT_Z_LSB_REG 0x06 +#define HMC5883_DATA_OUT_Y_MSB_REG 0x07 +#define HMC5883_DATA_OUT_Y_LSB_REG 0x08 #define HMC5843_STATUS_REG 0x09 #define HMC5843_ID_REG_A 0x0A #define HMC5843_ID_REG_B 0x0B #define HMC5843_ID_REG_C 0x0C + +/* + * Beware: identification of the HMC5883 is still "H43"; + * I2C address is also unchanged + */ #define HMC5843_ID_REG_LENGTH 0x03 #define HMC5843_ID_STRING "H43" +#define HMC5843_I2C_ADDRESS 0x1E /* - * Range settings in (+-)Ga - * */ -#define RANGE_GAIN_OFFSET 0x05 - -#define RANGE_0_7 0x00 -#define RANGE_1_0 0x01 /* default */ -#define RANGE_1_5 0x02 -#define RANGE_2_0 0x03 -#define RANGE_3_2 0x04 -#define RANGE_3_8 0x05 -#define RANGE_4_5 0x06 -#define RANGE_6_5 0x07 /* Not recommended */ + * Range gain settings in (+-)Ga + * Beware: HMC5843 and HMC5883 have different recommended sensor field + * ranges; default corresponds to +-1.0 Ga and +-1.3 Ga, respectively + */ +#define HMC5843_RANGE_GAIN_OFFSET 0x05 +#define HMC5843_RANGE_GAIN_DEFAULT 0x01 +#define HMC5843_RANGE_GAIN_MAX 0x07 /* * Device status */ -#define DATA_READY 0x01 -#define DATA_OUTPUT_LOCK 0x02 -#define VOLTAGE_REGULATOR_ENABLED 0x04 +#define HMC5843_DATA_READY 0x01 +#define HMC5843_DATA_OUTPUT_LOCK 0x02 +/* Does not exist on HMC5883, not used */ +#define HMC5843_VOLTAGE_REGULATOR_ENABLED 0x04 /* * Mode register configuration */ -#define MODE_CONVERSION_CONTINUOUS 0x00 -#define MODE_CONVERSION_SINGLE 0x01 -#define MODE_IDLE 0x02 -#define MODE_SLEEP 0x03 - -/* Minimum Data Output Rate in 1/10 Hz */ -#define RATE_OFFSET 0x02 -#define RATE_BITMASK 0x1C -#define RATE_5 0x00 -#define RATE_10 0x01 -#define RATE_20 0x02 -#define RATE_50 0x03 -#define RATE_100 0x04 -#define RATE_200 0x05 -#define RATE_500 0x06 -#define RATE_NOT_USED 0x07 +#define HMC5843_MODE_CONVERSION_CONTINUOUS 0x00 +#define HMC5843_MODE_CONVERSION_SINGLE 0x01 +#define HMC5843_MODE_IDLE 0x02 +#define HMC5843_MODE_SLEEP 0x03 +#define HMC5843_MODE_MASK 0x03 + +/* + * HMC5843: Minimum data output rate + * HMC5883: Typical data output rate + */ +#define HMC5843_RATE_OFFSET 0x02 +#define HMC5843_RATE_BITMASK 0x1C +#define RATE_5 0x00 +#define RATE_10 0x01 +#define RATE_20 0x02 +#define RATE_50 0x03 +#define RATE_100 0x04 +#define RATE_200 0x05 +#define RATE_500 0x06 + +#define HMC5843_RATE_NOT_USED 0x07 /* - * Device Configuration + * Device measurement configuration */ -#define CONF_NORMAL 0x00 -#define CONF_POSITIVE_BIAS 0x01 -#define CONF_NEGATIVE_BIAS 0x02 -#define CONF_NOT_USED 0x03 -#define MEAS_CONF_MASK 0x03 +#define HMC5843_MEAS_CONF_NORMAL 0x00 +#define HMC5843_MEAS_CONF_POSITIVE_BIAS 0x01 +#define HMC5843_MEAS_CONF_NEGATIVE_BIAS 0x02 +#define HMC5843_MEAS_CONF_NOT_USED 0x03 +#define HMC5843_MEAS_CONF_MASK 0x03 -static int hmc5843_regval_to_nanoscale[] = { +/* + * Scaling factors: 10000000/Gain + */ +static const int hmc5843_regval_to_nanoscale[] = { 6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714 }; @@ -120,7 +133,7 @@ static const char * const regval_to_samp_freq[] = { /* Addresses to scan: 0x1E */ static const unsigned short normal_i2c[] = { HMC5843_I2C_ADDRESS, - I2C_CLIENT_END }; + I2C_CLIENT_END }; /* Each client has this additional data */ struct hmc5843_data { @@ -139,7 +152,7 @@ static s32 hmc5843_configure(struct i2c_client *client, /* The lower two bits contain the current conversion mode */ return i2c_smbus_write_byte_data(client, HMC5843_MODE_REG, - (operating_mode & 0x03)); + operating_mode & HMC5843_MODE_MASK); } /* Return the measurement value from the specified channel */ @@ -153,7 +166,7 @@ static int hmc5843_read_measurement(struct iio_dev *indio_dev, mutex_lock(&data->lock); result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); - while (!(result & DATA_READY)) + while (!(result & HMC5843_DATA_READY)) result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); result = i2c_smbus_read_word_data(client, address); @@ -208,7 +221,7 @@ static ssize_t hmc5843_set_operating_mode(struct device *dev, goto exit; } dev_dbg(dev, "set Conversion mode to %lu\n", operating_mode); - if (operating_mode > MODE_SLEEP) { + if (operating_mode > HMC5843_MODE_SLEEP) { count = -EINVAL; goto exit; } @@ -253,7 +266,8 @@ static s32 hmc5843_set_meas_conf(struct i2c_client *client, struct iio_dev *indio_dev = i2c_get_clientdata(client); struct hmc5843_data *data = iio_priv(indio_dev); u8 reg_val; - reg_val = (meas_conf & MEAS_CONF_MASK) | (data->rate << RATE_OFFSET); + reg_val = (meas_conf & HMC5843_MEAS_CONF_MASK) | + (data->rate << HMC5843_RATE_OFFSET); return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val); } @@ -319,8 +333,8 @@ static s32 hmc5843_set_rate(struct i2c_client *client, struct hmc5843_data *data = iio_priv(indio_dev); u8 reg_val; - reg_val = (data->meas_conf) | (rate << RATE_OFFSET); - if (rate >= RATE_NOT_USED) { + reg_val = (data->meas_conf) | (rate << HMC5843_RATE_OFFSET); + if (rate >= HMC5843_RATE_NOT_USED) { dev_err(&client->dev, "This data output rate is not supported\n"); return -EINVAL; @@ -379,7 +393,7 @@ static ssize_t show_sampling_frequency(struct device *dev, rate = i2c_smbus_read_byte_data(client, this_attr->address); if (rate < 0) return rate; - rate = (rate & RATE_BITMASK) >> RATE_OFFSET; + rate = (rate & HMC5843_RATE_BITMASK) >> HMC5843_RATE_OFFSET; return sprintf(buf, "%s\n", regval_to_samp_freq[rate]); } static IIO_DEVICE_ATTR(sampling_frequency, @@ -432,13 +446,13 @@ static ssize_t set_range(struct device *dev, } dev_dbg(dev, "set range to %lu\n", range); - if (range > RANGE_6_5) { + if (range > HMC5843_RANGE_GAIN_MAX) { count = -EINVAL; goto exit; } data->range = range; - range = range << RANGE_GAIN_OFFSET; + range = range << HMC5843_RANGE_GAIN_OFFSET; if (i2c_smbus_write_byte_data(client, this_attr->address, range)) count = -EINVAL; @@ -553,12 +567,12 @@ static int hmc5843_probe(struct i2c_client *client, err = -ENOMEM; goto exit; } - data = iio_priv(indio_dev); - /* default settings at probe */ - data->meas_conf = CONF_NORMAL; - data->range = RANGE_1_0; - data->operating_mode = MODE_CONVERSION_CONTINUOUS; + /* default settings at probe */ + data = iio_priv(indio_dev); + data->meas_conf = HMC5843_MEAS_CONF_NORMAL; + data->range = HMC5843_RANGE_GAIN_DEFAULT; + data->operating_mode = HMC5843_MODE_CONVERSION_CONTINUOUS; i2c_set_clientdata(client, indio_dev); @@ -587,7 +601,7 @@ static int hmc5843_remove(struct i2c_client *client) iio_device_unregister(indio_dev); /* sleep mode to save power */ - hmc5843_configure(client, MODE_SLEEP); + hmc5843_configure(client, HMC5843_MODE_SLEEP); iio_device_free(indio_dev); return 0; @@ -596,7 +610,7 @@ static int hmc5843_remove(struct i2c_client *client) #ifdef CONFIG_PM_SLEEP static int hmc5843_suspend(struct device *dev) { - hmc5843_configure(to_i2c_client(dev), MODE_SLEEP); + hmc5843_configure(to_i2c_client(dev), HMC5843_MODE_SLEEP); return 0; } |