diff options
author | Sean Young <sean@mess.org> | 2014-10-23 20:58:23 (GMT) |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@osg.samsung.com> | 2014-11-03 14:19:30 (GMT) |
commit | 3e5907e695f2f6e1ba622dc37b12b6bddb6295b1 (patch) | |
tree | 073dc156b53ba4a4ddf654909f804a023f9ebb4c /drivers/staging | |
parent | b1c97193c6437a6083da67f8e97c8ee29b2f1989 (diff) | |
download | linux-3e5907e695f2f6e1ba622dc37b12b6bddb6295b1.tar.xz |
[media] lirc_igorplugusb: remove
This driver has been replaced by an rc-core driver for the same hardware.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Diffstat (limited to 'drivers/staging')
-rw-r--r-- | drivers/staging/media/lirc/Kconfig | 6 | ||||
-rw-r--r-- | drivers/staging/media/lirc/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/media/lirc/lirc_igorplugusb.c | 508 |
3 files changed, 0 insertions, 515 deletions
diff --git a/drivers/staging/media/lirc/Kconfig b/drivers/staging/media/lirc/Kconfig index e60a59f..6879c46 100644 --- a/drivers/staging/media/lirc/Kconfig +++ b/drivers/staging/media/lirc/Kconfig @@ -18,12 +18,6 @@ config LIRC_BT829 help Driver for the IR interface on BT829-based hardware -config LIRC_IGORPLUGUSB - tristate "Igor Cesko's USB IR Receiver" - depends on LIRC && USB - help - Driver for Igor Cesko's USB IR Receiver - config LIRC_IMON tristate "Legacy SoundGraph iMON Receiver and Display" depends on LIRC && USB diff --git a/drivers/staging/media/lirc/Makefile b/drivers/staging/media/lirc/Makefile index b90fcab..5430adf 100644 --- a/drivers/staging/media/lirc/Makefile +++ b/drivers/staging/media/lirc/Makefile @@ -4,7 +4,6 @@ # Each configuration option enables a list of files. obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o -obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o obj-$(CONFIG_LIRC_IMON) += lirc_imon.o obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o diff --git a/drivers/staging/media/lirc/lirc_igorplugusb.c b/drivers/staging/media/lirc/lirc_igorplugusb.c deleted file mode 100644 index 431d1e8..0000000 --- a/drivers/staging/media/lirc/lirc_igorplugusb.c +++ /dev/null @@ -1,508 +0,0 @@ -/* - * lirc_igorplugusb - USB remote support for LIRC - * - * Supports the standard homebrew IgorPlugUSB receiver with Igor's firmware. - * See http://www.cesko.host.sk/IgorPlugUSB/IgorPlug-USB%20(AVR)_eng.htm - * - * The device can only record bursts of up to 36 pulses/spaces. - * Works fine with RC5. Longer commands lead to device buffer overrun. - * (Maybe a better firmware or a microcontroller with more ram can help?) - * - * Version 0.1 [beta status] - * - * Copyright (C) 2004 Jan M. Hochstein - * <hochstein@algo.informatik.tu-darmstadt.de> - * - * This driver was derived from: - * Paul Miller <pmiller9@users.sourceforge.net> - * "lirc_atiusb" module - * Vladimir Dergachev <volodya@minspring.com>'s 2002 - * "USB ATI Remote support" (input device) - * Adrian Dewhurst <sailor-lk@sailorfrag.net>'s 2002 - * "USB StreamZap remote driver" (LIRC) - * Artur Lipowski <alipowski@kki.net.pl>'s 2002 - * "lirc_dev" and "lirc_gpio" LIRC modules - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/kmod.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/usb.h> -#include <linux/time.h> - -#include <media/lirc.h> -#include <media/lirc_dev.h> - - -/* module identification */ -#define DRIVER_VERSION "0.2" -#define DRIVER_AUTHOR \ - "Jan M. Hochstein <hochstein@algo.informatik.tu-darmstadt.de>" -#define DRIVER_DESC "Igorplug USB remote driver for LIRC" -#define DRIVER_NAME "lirc_igorplugusb" - -/* One mode2 pulse/space has 4 bytes. */ -#define CODE_LENGTH sizeof(int) - -/* Igor's firmware cannot record bursts longer than 36. */ -#define DEVICE_BUFLEN 36 - -/* - * Header at the beginning of the device's buffer: - * unsigned char data_length - * unsigned char data_start (!=0 means ring-buffer overrun) - * unsigned char counter (incremented by each burst) - */ -#define DEVICE_HEADERLEN 3 - -/* This is for the gap */ -#define ADDITIONAL_LIRC_BYTES 2 - -/* times to poll per second */ -#define SAMPLE_RATE 100 -static int sample_rate = SAMPLE_RATE; - - -/**** Igor's USB Request Codes */ - -#define SET_INFRABUFFER_EMPTY 1 -/** - * Params: none - * Answer: empty - */ - -#define GET_INFRACODE 2 -/** - * Params: - * wValue: offset to begin reading infra buffer - * - * Answer: infra data - */ - -#define SET_DATAPORT_DIRECTION 3 -/** - * Params: - * wValue: (byte) 1 bit for each data port pin (0=in, 1=out) - * - * Answer: empty - */ - -#define GET_DATAPORT_DIRECTION 4 -/** - * Params: none - * - * Answer: (byte) 1 bit for each data port pin (0=in, 1=out) - */ - -#define SET_OUT_DATAPORT 5 -/** - * Params: - * wValue: byte to write to output data port - * - * Answer: empty - */ - -#define GET_OUT_DATAPORT 6 -/** - * Params: none - * - * Answer: least significant 3 bits read from output data port - */ - -#define GET_IN_DATAPORT 7 -/** - * Params: none - * - * Answer: least significant 3 bits read from input data port - */ - -#define READ_EEPROM 8 -/** - * Params: - * wValue: offset to begin reading EEPROM - * - * Answer: EEPROM bytes - */ - -#define WRITE_EEPROM 9 -/** - * Params: - * wValue: offset to EEPROM byte - * wIndex: byte to write - * - * Answer: empty - */ - -#define SEND_RS232 10 -/** - * Params: - * wValue: byte to send - * - * Answer: empty - */ - -#define RECV_RS232 11 -/** - * Params: none - * - * Answer: byte received - */ - -#define SET_RS232_BAUD 12 -/** - * Params: - * wValue: byte to write to UART bit rate register (UBRR) - * - * Answer: empty - */ - -#define GET_RS232_BAUD 13 -/** - * Params: none - * - * Answer: byte read from UART bit rate register (UBRR) - */ - - -/* data structure for each usb remote */ -struct igorplug { - - /* usb */ - struct usb_device *usbdev; - int devnum; - - unsigned char *buf_in; - unsigned int len_in; - int in_space; - struct timeval last_time; - - dma_addr_t dma_in; - - /* lirc */ - struct lirc_driver *d; - - /* handle sending (init strings) */ - int send_flags; -}; - -static int unregister_from_lirc(struct igorplug *ir) -{ - struct lirc_driver *d; - int devnum; - - devnum = ir->devnum; - d = ir->d; - - if (!d) { - dev_err(&ir->usbdev->dev, - "%s: called with NULL lirc driver struct!\n", __func__); - return -EINVAL; - } - - dev_dbg(&ir->usbdev->dev, "calling lirc_unregister_driver\n"); - lirc_unregister_driver(d->minor); - - return devnum; -} - -static int set_use_inc(void *data) -{ - struct igorplug *ir = data; - - if (!ir) { - printk(DRIVER_NAME "[?]: set_use_inc called with no context\n"); - return -EIO; - } - - dev_dbg(&ir->usbdev->dev, "set use inc\n"); - - if (!ir->usbdev) - return -ENODEV; - - return 0; -} - -static void set_use_dec(void *data) -{ - struct igorplug *ir = data; - - if (!ir) { - printk(DRIVER_NAME "[?]: set_use_dec called with no context\n"); - return; - } - - dev_dbg(&ir->usbdev->dev, "set use dec\n"); -} - -static void send_fragment(struct igorplug *ir, struct lirc_buffer *buf, - int i, int max) -{ - int code; - - /* MODE2: pulse/space (PULSE_BIT) in 1us units */ - while (i < max) { - /* 1 Igor-tick = 85.333333 us */ - code = (unsigned int)ir->buf_in[i] * 85 + - (unsigned int)ir->buf_in[i] / 3; - ir->last_time.tv_usec += code; - if (ir->in_space) - code |= PULSE_BIT; - lirc_buffer_write(buf, (unsigned char *)&code); - /* 1 chunk = CODE_LENGTH bytes */ - ir->in_space ^= 1; - ++i; - } -} - -/** - * Called in user context. - * return 0 if data was added to the buffer and - * -ENODATA if none was available. This should add some number of bits - * evenly divisible by code_length to the buffer - */ -static int igorplugusb_remote_poll(void *data, struct lirc_buffer *buf) -{ - int ret; - struct igorplug *ir = (struct igorplug *)data; - - if (!ir || !ir->usbdev) /* Has the device been removed? */ - return -ENODEV; - - memset(ir->buf_in, 0, ir->len_in); - - ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), - GET_INFRACODE, USB_TYPE_VENDOR | USB_DIR_IN, - 0/* offset */, /*unused*/0, - ir->buf_in, ir->len_in, - /*timeout*/HZ * USB_CTRL_GET_TIMEOUT); - if (ret > 0) { - int code, timediff; - struct timeval now; - - /* ACK packet has 1 byte --> ignore */ - if (ret < DEVICE_HEADERLEN) - return -ENODATA; - - dev_dbg(&ir->usbdev->dev, "Got %d bytes. Header: %*ph\n", - ret, 3, ir->buf_in); - - do_gettimeofday(&now); - timediff = now.tv_sec - ir->last_time.tv_sec; - if (timediff + 1 > PULSE_MASK / 1000000) - timediff = PULSE_MASK; - else { - timediff *= 1000000; - timediff += now.tv_usec - ir->last_time.tv_usec; - } - ir->last_time.tv_sec = now.tv_sec; - ir->last_time.tv_usec = now.tv_usec; - - /* create leading gap */ - code = timediff; - lirc_buffer_write(buf, (unsigned char *)&code); - ir->in_space = 1; /* next comes a pulse */ - - if (ir->buf_in[2] == 0) - send_fragment(ir, buf, DEVICE_HEADERLEN, ret); - else { - dev_warn(&ir->usbdev->dev, - "[%d]: Device buffer overrun.\n", ir->devnum); - /* HHHNNNNNNNNNNNOOOOOOOO H = header - <---[2]---> N = newer - <---------ret--------> O = older */ - ir->buf_in[2] %= ret - DEVICE_HEADERLEN; /* sanitize */ - /* keep even-ness to not desync pulse/pause */ - send_fragment(ir, buf, DEVICE_HEADERLEN + - ir->buf_in[2] - (ir->buf_in[2] & 1), ret); - send_fragment(ir, buf, DEVICE_HEADERLEN, - DEVICE_HEADERLEN + ir->buf_in[2]); - } - - ret = usb_control_msg( - ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), - SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN, - /*unused*/0, /*unused*/0, - /*dummy*/ir->buf_in, /*dummy*/ir->len_in, - /*timeout*/HZ * USB_CTRL_GET_TIMEOUT); - if (ret < 0) - printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: error %d\n", - ir->devnum, ret); - return 0; - } else if (ret < 0) - printk(DRIVER_NAME "[%d]: GET_INFRACODE: error %d\n", - ir->devnum, ret); - - return -ENODATA; -} - -static int igorplugusb_remote_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *dev; - struct usb_host_interface *idesc = NULL; - struct usb_endpoint_descriptor *ep; - struct igorplug *ir = NULL; - struct lirc_driver *driver = NULL; - int devnum, pipe, maxp; - char buf[63], name[128] = ""; - int ret; - - dev_dbg(&intf->dev, "%s: usb probe called.\n", __func__); - - dev = interface_to_usbdev(intf); - - idesc = intf->cur_altsetting; - - if (idesc->desc.bNumEndpoints != 1) - return -ENODEV; - - ep = &idesc->endpoint->desc; - if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) - != USB_DIR_IN) - || (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - != USB_ENDPOINT_XFER_CONTROL) - return -ENODEV; - - pipe = usb_rcvctrlpipe(dev, ep->bEndpointAddress); - devnum = dev->devnum; - maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - - dev_dbg(&intf->dev, "%s: bytes_in_key=%zu maxp=%d\n", - __func__, CODE_LENGTH, maxp); - - ir = devm_kzalloc(&intf->dev, sizeof(*ir), GFP_KERNEL); - if (!ir) - return -ENOMEM; - - driver = devm_kzalloc(&intf->dev, sizeof(*driver), GFP_KERNEL); - if (!driver) - return -ENOMEM; - - ir->buf_in = usb_alloc_coherent(dev, DEVICE_BUFLEN + DEVICE_HEADERLEN, - GFP_ATOMIC, &ir->dma_in); - if (!ir->buf_in) - return -ENOMEM; - - strcpy(driver->name, DRIVER_NAME " "); - driver->minor = -1; - driver->code_length = CODE_LENGTH * 8; /* in bits */ - driver->features = LIRC_CAN_REC_MODE2; - driver->data = ir; - driver->chunk_size = CODE_LENGTH; - driver->buffer_size = DEVICE_BUFLEN + ADDITIONAL_LIRC_BYTES; - driver->set_use_inc = &set_use_inc; - driver->set_use_dec = &set_use_dec; - driver->sample_rate = sample_rate; /* per second */ - driver->add_to_buf = &igorplugusb_remote_poll; - driver->dev = &intf->dev; - driver->owner = THIS_MODULE; - - ret = lirc_register_driver(driver); - if (ret < 0) { - usb_free_coherent(dev, DEVICE_BUFLEN + DEVICE_HEADERLEN, - ir->buf_in, ir->dma_in); - return ret; - } - - driver->minor = ret; - ir->d = driver; - ir->devnum = devnum; - ir->usbdev = dev; - ir->len_in = DEVICE_BUFLEN + DEVICE_HEADERLEN; - ir->in_space = 1; /* First mode2 event is a space. */ - do_gettimeofday(&ir->last_time); - - if (dev->descriptor.iManufacturer - && usb_string(dev, dev->descriptor.iManufacturer, - buf, sizeof(buf)) > 0) - strlcpy(name, buf, sizeof(name)); - if (dev->descriptor.iProduct - && usb_string(dev, dev->descriptor.iProduct, buf, sizeof(buf)) > 0) - snprintf(name + strlen(name), sizeof(name) - strlen(name), - " %s", buf); - printk(DRIVER_NAME "[%d]: %s on usb%d:%d\n", devnum, name, - dev->bus->busnum, devnum); - - /* clear device buffer */ - ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), - SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN, - /*unused*/0, /*unused*/0, - /*dummy*/ir->buf_in, /*dummy*/ir->len_in, - /*timeout*/HZ * USB_CTRL_GET_TIMEOUT); - if (ret < 0) - printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: error %d\n", - devnum, ret); - - usb_set_intfdata(intf, ir); - return 0; -} - -static void igorplugusb_remote_disconnect(struct usb_interface *intf) -{ - struct usb_device *usbdev = interface_to_usbdev(intf); - struct igorplug *ir = usb_get_intfdata(intf); - struct device *dev = &intf->dev; - int devnum; - - usb_set_intfdata(intf, NULL); - - if (!ir || !ir->d) - return; - - ir->usbdev = NULL; - - usb_free_coherent(usbdev, ir->len_in, ir->buf_in, ir->dma_in); - - devnum = unregister_from_lirc(ir); - - dev_info(dev, DRIVER_NAME "[%d]: %s done\n", devnum, __func__); -} - -static struct usb_device_id igorplugusb_remote_id_table[] = { - /* Igor Plug USB (Atmel's Manufact. ID) */ - { USB_DEVICE(0x03eb, 0x0002) }, - /* Fit PC2 Infrared Adapter */ - { USB_DEVICE(0x03eb, 0x21fe) }, - - /* Terminating entry */ - { } -}; - -static struct usb_driver igorplugusb_remote_driver = { - .name = DRIVER_NAME, - .probe = igorplugusb_remote_probe, - .disconnect = igorplugusb_remote_disconnect, - .id_table = igorplugusb_remote_id_table -}; - -module_usb_driver(igorplugusb_remote_driver); - -#include <linux/vermagic.h> -MODULE_INFO(vermagic, VERMAGIC_STRING); - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(usb, igorplugusb_remote_id_table); - -module_param(sample_rate, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(sample_rate, "Sampling rate in Hz (default: 100)"); |