Kconfig: Remove useless "default N" lines

A number of Kconfig entries default to (uppercase) "N". It was clearly
intended to use "default n". But since (lowercase) "n" is the default
anyway, these lines might as well be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

10 files changed, 0 insertions, 17 deletions

diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index 1e9ab6d..22cf17d 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -2,7 +2,6 @@ menu "Android"
 
 config ANDROID
 	bool "Android Drivers"
-	default N
 	---help---
 	  Enable support for various drivers needed on the Android platform
 
@@ -60,7 +59,6 @@ config ANDROID_TIMED_GPIO
 
 config ANDROID_LOW_MEMORY_KILLER
 	bool "Android Low Memory Killer"
-	default N
 	---help---
 	  Registers processes to be killed when memory is low
 
diff --git a/drivers/staging/bcm/Kconfig b/drivers/staging/bcm/Kconfig
index 83c9752..8acf4b2 100644
--- a/drivers/staging/bcm/Kconfig
+++ b/drivers/staging/bcm/Kconfig
@@ -1,7 +1,6 @@
 config BCM_WIMAX
        tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support"
        depends on USB && NET
-       default N
        help
          This is an experimental driver for the Beceem WIMAX chipset used
 	 by Sprint 4G.
diff --git a/drivers/staging/frontier/Kconfig b/drivers/staging/frontier/Kconfig
index 7121853..4da290b 100644
--- a/drivers/staging/frontier/Kconfig
+++ b/drivers/staging/frontier/Kconfig
@@ -1,6 +1,5 @@
 config TRANZPORT
 	tristate "Frontier Tranzport and Alphatrack support"
 	depends on USB
-	default N
 	---help---
 	  Enable support for the Frontier Tranzport and Alphatrack devices.
diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig
index 04bd0fb..95a3af6 100644
--- a/drivers/staging/media/go7007/Kconfig
+++ b/drivers/staging/media/go7007/Kconfig
@@ -13,7 +13,6 @@ config VIDEO_GO7007
 	select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
-	default N
 	---help---
 	  This is a video4linux driver for the WIS GO7007 MPEG
 	  encoder chip.
@@ -24,7 +23,6 @@ config VIDEO_GO7007
 config VIDEO_GO7007_USB
 	tristate "WIS GO7007 USB support"
 	depends on VIDEO_GO7007 && USB
-	default N
 	---help---
 	  This is a video4linux driver for the WIS GO7007 MPEG
 	  encoder chip over USB.
@@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER
 config VIDEO_GO7007_USB_S2250_BOARD
 	tristate "Sensoray 2250/2251 support"
 	depends on VIDEO_GO7007_USB && USB
-	default N
 	---help---
 	  This is a video4linux driver for the Sensoray 2250/2251 device.
 
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 3162aab..ff8d41e 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -6,6 +6,5 @@ config R8187SE
 	select WEXT_PRIV
 	select EEPROM_93CX6
 	select CRYPTO
-	default N
 	---help---
 	  If built as a module, it will be called r8187se.ko.
diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
index c9c548f..70fecfa 100644
--- a/drivers/staging/rtl8188eu/Kconfig
+++ b/drivers/staging/rtl8188eu/Kconfig
@@ -3,7 +3,6 @@ config R8188EU
 	depends on WLAN && USB
 	select WIRELESS_EXT
 	select WEXT_PRIV
-	default N
 	---help---
 	This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
 	If built as a module, it will be called r8188eu.
diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig
index 50e0d91..ad82bc3 100644
--- a/drivers/staging/rtl8192e/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig
@@ -5,5 +5,4 @@ config RTL8192E
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select CRYPTO
-	default N
 	---help---
diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig
index 3f05509..3ee9d0d 100644
--- a/drivers/staging/rtl8192u/Kconfig
+++ b/drivers/staging/rtl8192u/Kconfig
@@ -5,5 +5,4 @@ config RTL8192U
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select CRYPTO
-	default N
 	---help---
diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig
index 6a43312..f160eee 100644
--- a/drivers/staging/rtl8712/Kconfig
+++ b/drivers/staging/rtl8712/Kconfig
@@ -4,7 +4,6 @@ config R8712U
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select FW_LOADER
-	default N
 	---help---
 	This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
 	If built as a module, it will be called r8712u.
@@ -12,7 +11,6 @@ config R8712U
 config R8712_TX_AGGR
 	bool "Realtek RTL8712U Transmit Aggregation code"
 	depends on R8712U && BROKEN
-	default N
 	---help---
 	This option provides transmit aggregation for the Realtek RTL8712 USB device.
 
diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig
index 8860009..bd99e9e 100644
--- a/drivers/staging/usbip/Kconfig
+++ b/drivers/staging/usbip/Kconfig
@@ -1,7 +1,6 @@
 config USBIP_CORE
 	tristate "USB/IP support"
 	depends on USB && NET
-	default N
 	---help---
 	  This enables pushing USB packets over IP to allow remote
 	  machines direct access to USB devices. It provides the
@@ -18,7 +17,6 @@ config USBIP_CORE
 config USBIP_VHCI_HCD
 	tristate "VHCI hcd"
 	depends on USBIP_CORE
-	default N
 	---help---
 	  This enables the USB/IP virtual host controller driver,
 	  which is run on the remote machine.
@@ -29,7 +27,6 @@ config USBIP_VHCI_HCD
 config USBIP_HOST
 	tristate "Host driver"
 	depends on USBIP_CORE
-	default N
 	---help---
 	  This enables the USB/IP host driver, which is run on the
 	  machine that is sharing the USB devices.
@@ -40,6 +37,5 @@ config USBIP_HOST
 config USBIP_DEBUG
 	bool "Debug messages for USB/IP"
 	depends on USBIP_CORE
-	default N
 	---help---
 	  This enables the debug messages from the USB/IP drivers.