tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 2159 insertions, 0 deletions

diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
new file mode 100644
index 0000000..6a9c660
--- /dev/null
+++ b/drivers/tty/serial/mpsc.c
@@ -0,0 +1,2159 @@
+/*
+ * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240,
+ * GT64260, MV64340, MV64360, GT96100, ... ).
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * Based on an old MPSC driver that was in the linuxppc tree.  It appears to
+ * have been created by Chris Zankel (formerly of MontaVista) but there
+ * is no proper Copyright so I'm not sure.  Apparently, parts were also
+ * taken from PPCBoot (now U-Boot).  Also based on drivers/serial/8250.c
+ * by Russell King.
+ *
+ * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+/*
+ * The MPSC interface is much like a typical network controller's interface.
+ * That is, you set up separate rings of descriptors for transmitting and
+ * receiving data.  There is also a pool of buffers with (one buffer per
+ * descriptor) that incoming data are dma'd into or outgoing data are dma'd
+ * out of.
+ *
+ * The MPSC requires two other controllers to be able to work.  The Baud Rate
+ * Generator (BRG) provides a clock at programmable frequencies which determines
+ * the baud rate.  The Serial DMA Controller (SDMA) takes incoming data from the
+ * MPSC and DMA's it into memory or DMA's outgoing data and passes it to the
+ * MPSC.  It is actually the SDMA interrupt that the driver uses to keep the
+ * transmit and receive "engines" going (i.e., indicate data has been
+ * transmitted or received).
+ *
+ * NOTES:
+ *
+ * 1) Some chips have an erratum where several regs cannot be
+ * read.  To work around that, we keep a local copy of those regs in
+ * 'mpsc_port_info'.
+ *
+ * 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr
+ * accesses system mem with coherency enabled.  For that reason, the driver
+ * assumes that coherency for that ctlr has been disabled.  This means
+ * that when in a cache coherent system, the driver has to manually manage
+ * the data cache on the areas that it touches because the dma_* macro are
+ * basically no-ops.
+ *
+ * 3) There is an erratum (on PPC) where you can't use the instruction to do
+ * a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places
+ * where a DMA_TO_DEVICE/clean would have [otherwise] sufficed.
+ *
+ * 4) AFAICT, hardware flow control isn't supported by the controller --MAG.
+ */
+
+
+#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+#include <linux/gfp.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define	MPSC_NUM_CTLRS		2
+
+/*
+ * Descriptors and buffers must be cache line aligned.
+ * Buffers lengths must be multiple of cache line size.
+ * Number of Tx & Rx descriptors must be powers of 2.
+ */
+#define	MPSC_RXR_ENTRIES	32
+#define	MPSC_RXRE_SIZE		dma_get_cache_alignment()
+#define	MPSC_RXR_SIZE		(MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE)
+#define	MPSC_RXBE_SIZE		dma_get_cache_alignment()
+#define	MPSC_RXB_SIZE		(MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE)
+
+#define	MPSC_TXR_ENTRIES	32
+#define	MPSC_TXRE_SIZE		dma_get_cache_alignment()
+#define	MPSC_TXR_SIZE		(MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE)
+#define	MPSC_TXBE_SIZE		dma_get_cache_alignment()
+#define	MPSC_TXB_SIZE		(MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE)
+
+#define	MPSC_DMA_ALLOC_SIZE	(MPSC_RXR_SIZE + MPSC_RXB_SIZE + MPSC_TXR_SIZE \
+		+ MPSC_TXB_SIZE + dma_get_cache_alignment() /* for alignment */)
+
+/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */
+struct mpsc_rx_desc {
+	u16 bufsize;
+	u16 bytecnt;
+	u32 cmdstat;
+	u32 link;
+	u32 buf_ptr;
+} __attribute((packed));
+
+struct mpsc_tx_desc {
+	u16 bytecnt;
+	u16 shadow;
+	u32 cmdstat;
+	u32 link;
+	u32 buf_ptr;
+} __attribute((packed));
+
+/*
+ * Some regs that have the erratum that you can't read them are are shared
+ * between the two MPSC controllers.  This struct contains those shared regs.
+ */
+struct mpsc_shared_regs {
+	phys_addr_t mpsc_routing_base_p;
+	phys_addr_t sdma_intr_base_p;
+
+	void __iomem *mpsc_routing_base;
+	void __iomem *sdma_intr_base;
+
+	u32 MPSC_MRR_m;
+	u32 MPSC_RCRR_m;
+	u32 MPSC_TCRR_m;
+	u32 SDMA_INTR_CAUSE_m;
+	u32 SDMA_INTR_MASK_m;
+};
+
+/* The main driver data structure */
+struct mpsc_port_info {
+	struct uart_port port;	/* Overlay uart_port structure */
+
+	/* Internal driver state for this ctlr */
+	u8 ready;
+	u8 rcv_data;
+	tcflag_t c_iflag;	/* save termios->c_iflag */
+	tcflag_t c_cflag;	/* save termios->c_cflag */
+
+	/* Info passed in from platform */
+	u8 mirror_regs;		/* Need to mirror regs? */
+	u8 cache_mgmt;		/* Need manual cache mgmt? */
+	u8 brg_can_tune;	/* BRG has baud tuning? */
+	u32 brg_clk_src;
+	u16 mpsc_max_idle;
+	int default_baud;
+	int default_bits;
+	int default_parity;
+	int default_flow;
+
+	/* Physical addresses of various blocks of registers (from platform) */
+	phys_addr_t mpsc_base_p;
+	phys_addr_t sdma_base_p;
+	phys_addr_t brg_base_p;
+
+	/* Virtual addresses of various blocks of registers (from platform) */
+	void __iomem *mpsc_base;
+	void __iomem *sdma_base;
+	void __iomem *brg_base;
+
+	/* Descriptor ring and buffer allocations */
+	void *dma_region;
+	dma_addr_t dma_region_p;
+
+	dma_addr_t rxr;		/* Rx descriptor ring */
+	dma_addr_t rxr_p;	/* Phys addr of rxr */
+	u8 *rxb;		/* Rx Ring I/O buf */
+	u8 *rxb_p;		/* Phys addr of rxb */
+	u32 rxr_posn;		/* First desc w/ Rx data */
+
+	dma_addr_t txr;		/* Tx descriptor ring */
+	dma_addr_t txr_p;	/* Phys addr of txr */
+	u8 *txb;		/* Tx Ring I/O buf */
+	u8 *txb_p;		/* Phys addr of txb */
+	int txr_head;		/* Where new data goes */
+	int txr_tail;		/* Where sent data comes off */
+	spinlock_t tx_lock;	/* transmit lock */
+
+	/* Mirrored values of regs we can't read (if 'mirror_regs' set) */
+	u32 MPSC_MPCR_m;
+	u32 MPSC_CHR_1_m;
+	u32 MPSC_CHR_2_m;
+	u32 MPSC_CHR_10_m;
+	u32 BRG_BCR_m;
+	struct mpsc_shared_regs *shared_regs;
+};
+
+/* Hooks to platform-specific code */
+int mpsc_platform_register_driver(void);
+void mpsc_platform_unregister_driver(void);
+
+/* Hooks back in to mpsc common to be called by platform-specific code */
+struct mpsc_port_info *mpsc_device_probe(int index);
+struct mpsc_port_info *mpsc_device_remove(int index);
+
+/* Main MPSC Configuration Register Offsets */
+#define	MPSC_MMCRL			0x0000
+#define	MPSC_MMCRH			0x0004
+#define	MPSC_MPCR			0x0008
+#define	MPSC_CHR_1			0x000c
+#define	MPSC_CHR_2			0x0010
+#define	MPSC_CHR_3			0x0014
+#define	MPSC_CHR_4			0x0018
+#define	MPSC_CHR_5			0x001c
+#define	MPSC_CHR_6			0x0020
+#define	MPSC_CHR_7			0x0024
+#define	MPSC_CHR_8			0x0028
+#define	MPSC_CHR_9			0x002c
+#define	MPSC_CHR_10			0x0030
+#define	MPSC_CHR_11			0x0034
+
+#define	MPSC_MPCR_FRZ			(1 << 9)
+#define	MPSC_MPCR_CL_5			0
+#define	MPSC_MPCR_CL_6			1
+#define	MPSC_MPCR_CL_7			2
+#define	MPSC_MPCR_CL_8			3
+#define	MPSC_MPCR_SBL_1			0
+#define	MPSC_MPCR_SBL_2			1
+
+#define	MPSC_CHR_2_TEV			(1<<1)
+#define	MPSC_CHR_2_TA			(1<<7)
+#define	MPSC_CHR_2_TTCS			(1<<9)
+#define	MPSC_CHR_2_REV			(1<<17)
+#define	MPSC_CHR_2_RA			(1<<23)
+#define	MPSC_CHR_2_CRD			(1<<25)
+#define	MPSC_CHR_2_EH			(1<<31)
+#define	MPSC_CHR_2_PAR_ODD		0
+#define	MPSC_CHR_2_PAR_SPACE		1
+#define	MPSC_CHR_2_PAR_EVEN		2
+#define	MPSC_CHR_2_PAR_MARK		3
+
+/* MPSC Signal Routing */
+#define	MPSC_MRR			0x0000
+#define	MPSC_RCRR			0x0004
+#define	MPSC_TCRR			0x0008
+
+/* Serial DMA Controller Interface Registers */
+#define	SDMA_SDC			0x0000
+#define	SDMA_SDCM			0x0008
+#define	SDMA_RX_DESC			0x0800
+#define	SDMA_RX_BUF_PTR			0x0808
+#define	SDMA_SCRDP			0x0810
+#define	SDMA_TX_DESC			0x0c00
+#define	SDMA_SCTDP			0x0c10
+#define	SDMA_SFTDP			0x0c14
+
+#define	SDMA_DESC_CMDSTAT_PE		(1<<0)
+#define	SDMA_DESC_CMDSTAT_CDL		(1<<1)
+#define	SDMA_DESC_CMDSTAT_FR		(1<<3)
+#define	SDMA_DESC_CMDSTAT_OR		(1<<6)
+#define	SDMA_DESC_CMDSTAT_BR		(1<<9)
+#define	SDMA_DESC_CMDSTAT_MI		(1<<10)
+#define	SDMA_DESC_CMDSTAT_A		(1<<11)
+#define	SDMA_DESC_CMDSTAT_AM		(1<<12)
+#define	SDMA_DESC_CMDSTAT_CT		(1<<13)
+#define	SDMA_DESC_CMDSTAT_C		(1<<14)
+#define	SDMA_DESC_CMDSTAT_ES		(1<<15)
+#define	SDMA_DESC_CMDSTAT_L		(1<<16)
+#define	SDMA_DESC_CMDSTAT_F		(1<<17)
+#define	SDMA_DESC_CMDSTAT_P		(1<<18)
+#define	SDMA_DESC_CMDSTAT_EI		(1<<23)
+#define	SDMA_DESC_CMDSTAT_O		(1<<31)
+
+#define SDMA_DESC_DFLT			(SDMA_DESC_CMDSTAT_O \
+		| SDMA_DESC_CMDSTAT_EI)
+
+#define	SDMA_SDC_RFT			(1<<0)
+#define	SDMA_SDC_SFM			(1<<1)
+#define	SDMA_SDC_BLMR			(1<<6)
+#define	SDMA_SDC_BLMT			(1<<7)
+#define	SDMA_SDC_POVR			(1<<8)
+#define	SDMA_SDC_RIFB			(1<<9)
+
+#define	SDMA_SDCM_ERD			(1<<7)
+#define	SDMA_SDCM_AR			(1<<15)
+#define	SDMA_SDCM_STD			(1<<16)
+#define	SDMA_SDCM_TXD			(1<<23)
+#define	SDMA_SDCM_AT			(1<<31)
+
+#define	SDMA_0_CAUSE_RXBUF		(1<<0)
+#define	SDMA_0_CAUSE_RXERR		(1<<1)
+#define	SDMA_0_CAUSE_TXBUF		(1<<2)
+#define	SDMA_0_CAUSE_TXEND		(1<<3)
+#define	SDMA_1_CAUSE_RXBUF		(1<<8)
+#define	SDMA_1_CAUSE_RXERR		(1<<9)
+#define	SDMA_1_CAUSE_TXBUF		(1<<10)
+#define	SDMA_1_CAUSE_TXEND		(1<<11)
+
+#define	SDMA_CAUSE_RX_MASK	(SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR \
+		| SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR)
+#define	SDMA_CAUSE_TX_MASK	(SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND \
+		| SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND)
+
+/* SDMA Interrupt registers */
+#define	SDMA_INTR_CAUSE			0x0000
+#define	SDMA_INTR_MASK			0x0080
+
+/* Baud Rate Generator Interface Registers */
+#define	BRG_BCR				0x0000
+#define	BRG_BTR				0x0004
+
+/*
+ * Define how this driver is known to the outside (we've been assigned a
+ * range on the "Low-density serial ports" major).
+ */
+#define MPSC_MAJOR			204
+#define MPSC_MINOR_START		44
+#define	MPSC_DRIVER_NAME		"MPSC"
+#define	MPSC_DEV_NAME			"ttyMM"
+#define	MPSC_VERSION			"1.00"
+
+static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS];
+static struct mpsc_shared_regs mpsc_shared_regs;
+static struct uart_driver mpsc_reg;
+
+static void mpsc_start_rx(struct mpsc_port_info *pi);
+static void mpsc_free_ring_mem(struct mpsc_port_info *pi);
+static void mpsc_release_port(struct uart_port *port);
+/*
+ ******************************************************************************
+ *
+ * Baud Rate Generator Routines (BRG)
+ *
+ ******************************************************************************
+ */
+static void mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src)
+{
+	u32	v;
+
+	v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
+	v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18);
+
+	if (pi->brg_can_tune)
+		v &= ~(1 << 25);
+
+	if (pi->mirror_regs)
+		pi->BRG_BCR_m = v;
+	writel(v, pi->brg_base + BRG_BCR);
+
+	writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000,
+		pi->brg_base + BRG_BTR);
+}
+
+static void mpsc_brg_enable(struct mpsc_port_info *pi)
+{
+	u32	v;
+
+	v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
+	v |= (1 << 16);
+
+	if (pi->mirror_regs)
+		pi->BRG_BCR_m = v;
+	writel(v, pi->brg_base + BRG_BCR);
+}
+
+static void mpsc_brg_disable(struct mpsc_port_info *pi)
+{
+	u32	v;
+
+	v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
+	v &= ~(1 << 16);
+
+	if (pi->mirror_regs)
+		pi->BRG_BCR_m = v;
+	writel(v, pi->brg_base + BRG_BCR);
+}
+
+/*
+ * To set the baud, we adjust the CDV field in the BRG_BCR reg.
+ * From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1.
+ * However, the input clock is divided by 16 in the MPSC b/c of how
+ * 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our
+ * calculation by 16 to account for that.  So the real calculation
+ * that accounts for the way the mpsc is set up is:
+ * CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1.
+ */
+static void mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud)
+{
+	u32	cdv = (pi->port.uartclk / (baud << 5)) - 1;
+	u32	v;
+
+	mpsc_brg_disable(pi);
+	v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
+	v = (v & 0xffff0000) | (cdv & 0xffff);
+
+	if (pi->mirror_regs)
+		pi->BRG_BCR_m = v;
+	writel(v, pi->brg_base + BRG_BCR);
+	mpsc_brg_enable(pi);
+}
+
+/*
+ ******************************************************************************
+ *
+ * Serial DMA Routines (SDMA)
+ *
+ ******************************************************************************
+ */
+
+static void mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size)
+{
+	u32	v;
+
+	pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n",
+			pi->port.line, burst_size);
+
+	burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */
+
+	if (burst_size < 2)
+		v = 0x0;	/* 1 64-bit word */
+	else if (burst_size < 4)
+		v = 0x1;	/* 2 64-bit words */
+	else if (burst_size < 8)
+		v = 0x2;	/* 4 64-bit words */
+	else
+		v = 0x3;	/* 8 64-bit words */
+
+	writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12),
+		pi->sdma_base + SDMA_SDC);
+}
+
+static void mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size)
+{
+	pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line,
+		burst_size);
+
+	writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f,
+		pi->sdma_base + SDMA_SDC);
+	mpsc_sdma_burstsize(pi, burst_size);
+}
+
+static u32 mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask)
+{
+	u32	old, v;
+
+	pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask);
+
+	old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
+		readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
+
+	mask &= 0xf;
+	if (pi->port.line)
+		mask <<= 8;
+	v &= ~mask;
+
+	if (pi->mirror_regs)
+		pi->shared_regs->SDMA_INTR_MASK_m = v;
+	writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
+
+	if (pi->port.line)
+		old >>= 8;
+	return old & 0xf;
+}
+
+static void mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask)
+{
+	u32	v;
+
+	pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask);
+
+	v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m
+		: readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
+
+	mask &= 0xf;
+	if (pi->port.line)
+		mask <<= 8;
+	v |= mask;
+
+	if (pi->mirror_regs)
+		pi->shared_regs->SDMA_INTR_MASK_m = v;
+	writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
+}
+
+static void mpsc_sdma_intr_ack(struct mpsc_port_info *pi)
+{
+	pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line);
+
+	if (pi->mirror_regs)
+		pi->shared_regs->SDMA_INTR_CAUSE_m = 0;
+	writeb(0x00, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE
+			+ pi->port.line);
+}
+
+static void mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi,
+		struct mpsc_rx_desc *rxre_p)
+{
+	pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n",
+		pi->port.line, (u32)rxre_p);
+
+	writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP);
+}
+
+static void mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi,
+		struct mpsc_tx_desc *txre_p)
+{
+	writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP);
+	writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP);
+}
+
+static void mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val)
+{
+	u32	v;
+
+	v = readl(pi->sdma_base + SDMA_SDCM);
+	if (val)
+		v |= val;
+	else
+		v = 0;
+	wmb();
+	writel(v, pi->sdma_base + SDMA_SDCM);
+	wmb();
+}
+
+static uint mpsc_sdma_tx_active(struct mpsc_port_info *pi)
+{
+	return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD;
+}
+
+static void mpsc_sdma_start_tx(struct mpsc_port_info *pi)
+{
+	struct mpsc_tx_desc *txre, *txre_p;
+
+	/* If tx isn't running & there's a desc ready to go, start it */
+	if (!mpsc_sdma_tx_active(pi)) {
+		txre = (struct mpsc_tx_desc *)(pi->txr
+				+ (pi->txr_tail * MPSC_TXRE_SIZE));
+		dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE,
+				DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+			invalidate_dcache_range((ulong)txre,
+					(ulong)txre + MPSC_TXRE_SIZE);
+#endif
+
+		if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) {
+			txre_p = (struct mpsc_tx_desc *)
+				(pi->txr_p + (pi->txr_tail * MPSC_TXRE_SIZE));
+
+			mpsc_sdma_set_tx_ring(pi, txre_p);
+			mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD);
+		}
+	}
+}
+
+static void mpsc_sdma_stop(struct mpsc_port_info *pi)
+{
+	pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line);
+
+	/* Abort any SDMA transfers */
+	mpsc_sdma_cmd(pi, 0);
+	mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT);
+
+	/* Clear the SDMA current and first TX and RX pointers */
+	mpsc_sdma_set_tx_ring(pi, NULL);
+	mpsc_sdma_set_rx_ring(pi, NULL);
+
+	/* Disable interrupts */
+	mpsc_sdma_intr_mask(pi, 0xf);
+	mpsc_sdma_intr_ack(pi);
+}
+
+/*
+ ******************************************************************************
+ *
+ * Multi-Protocol Serial Controller Routines (MPSC)
+ *
+ ******************************************************************************
+ */
+
+static void mpsc_hw_init(struct mpsc_port_info *pi)
+{
+	u32	v;
+
+	pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line);
+
+	/* Set up clock routing */
+	if (pi->mirror_regs) {
+		v = pi->shared_regs->MPSC_MRR_m;
+		v &= ~0x1c7;
+		pi->shared_regs->MPSC_MRR_m = v;
+		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
+
+		v = pi->shared_regs->MPSC_RCRR_m;
+		v = (v & ~0xf0f) | 0x100;
+		pi->shared_regs->MPSC_RCRR_m = v;
+		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
+
+		v = pi->shared_regs->MPSC_TCRR_m;
+		v = (v & ~0xf0f) | 0x100;
+		pi->shared_regs->MPSC_TCRR_m = v;
+		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
+	} else {
+		v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR);
+		v &= ~0x1c7;
+		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
+
+		v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
+		v = (v & ~0xf0f) | 0x100;
+		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
+
+		v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
+		v = (v & ~0xf0f) | 0x100;
+		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
+	}
+
+	/* Put MPSC in UART mode & enabel Tx/Rx egines */
+	writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL);
+
+	/* No preamble, 16x divider, low-latency, */
+	writel(0x04400400, pi->mpsc_base + MPSC_MMCRH);
+	mpsc_set_baudrate(pi, pi->default_baud);
+
+	if (pi->mirror_regs) {
+		pi->MPSC_CHR_1_m = 0;
+		pi->MPSC_CHR_2_m = 0;
+	}
+	writel(0, pi->mpsc_base + MPSC_CHR_1);
+	writel(0, pi->mpsc_base + MPSC_CHR_2);
+	writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3);
+	writel(0, pi->mpsc_base + MPSC_CHR_4);
+	writel(0, pi->mpsc_base + MPSC_CHR_5);
+	writel(0, pi->mpsc_base + MPSC_CHR_6);
+	writel(0, pi->mpsc_base + MPSC_CHR_7);
+	writel(0, pi->mpsc_base + MPSC_CHR_8);
+	writel(0, pi->mpsc_base + MPSC_CHR_9);
+	writel(0, pi->mpsc_base + MPSC_CHR_10);
+}
+
+static void mpsc_enter_hunt(struct mpsc_port_info *pi)
+{
+	pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line);
+
+	if (pi->mirror_regs) {
+		writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH,
+			pi->mpsc_base + MPSC_CHR_2);
+		/* Erratum prevents reading CHR_2 so just delay for a while */
+		udelay(100);
+	} else {
+		writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH,
+				pi->mpsc_base + MPSC_CHR_2);
+
+		while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH)
+			udelay(10);
+	}
+}
+
+static void mpsc_freeze(struct mpsc_port_info *pi)
+{
+	u32	v;
+
+	pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line);
+
+	v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
+		readl(pi->mpsc_base + MPSC_MPCR);
+	v |= MPSC_MPCR_FRZ;
+
+	if (pi->mirror_regs)
+		pi->MPSC_MPCR_m = v;
+	writel(v, pi->mpsc_base + MPSC_MPCR);
+}
+
+static void mpsc_unfreeze(struct mpsc_port_info *pi)
+{
+	u32	v;
+
+	v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
+		readl(pi->mpsc_base + MPSC_MPCR);
+	v &= ~MPSC_MPCR_FRZ;
+
+	if (pi->mirror_regs)
+		pi->MPSC_MPCR_m = v;
+	writel(v, pi->mpsc_base + MPSC_MPCR);
+
+	pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line);
+}
+
+static void mpsc_set_char_length(struct mpsc_port_info *pi, u32 len)
+{
+	u32	v;
+
+	pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len);
+
+	v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
+		readl(pi->mpsc_base + MPSC_MPCR);
+	v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12);
+
+	if (pi->mirror_regs)
+		pi->MPSC_MPCR_m = v;
+	writel(v, pi->mpsc_base + MPSC_MPCR);
+}
+
+static void mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len)
+{
+	u32	v;
+
+	pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n",
+		pi->port.line, len);
+
+	v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
+		readl(pi->mpsc_base + MPSC_MPCR);
+
+	v = (v & ~(1 << 14)) | ((len & 0x1) << 14);
+
+	if (pi->mirror_regs)
+		pi->MPSC_MPCR_m = v;
+	writel(v, pi->mpsc_base + MPSC_MPCR);
+}
+
+static void mpsc_set_parity(struct mpsc_port_info *pi, u32 p)
+{
+	u32	v;
+
+	pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p);
+
+	v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m :
+		readl(pi->mpsc_base + MPSC_CHR_2);
+
+	p &= 0x3;
+	v = (v & ~0xc000c) | (p << 18) | (p << 2);
+
+	if (pi->mirror_regs)
+		pi->MPSC_CHR_2_m = v;
+	writel(v, pi->mpsc_base + MPSC_CHR_2);
+}
+
+/*
+ ******************************************************************************
+ *
+ * Driver Init Routines
+ *
+ ******************************************************************************
+ */
+
+static void mpsc_init_hw(struct mpsc_port_info *pi)
+{
+	pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line);
+
+	mpsc_brg_init(pi, pi->brg_clk_src);
+	mpsc_brg_enable(pi);
+	mpsc_sdma_init(pi, dma_get_cache_alignment());	/* burst a cacheline */
+	mpsc_sdma_stop(pi);
+	mpsc_hw_init(pi);
+}
+
+static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
+{
+	int rc = 0;
+
+	pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n",
+		pi->port.line);
+
+	if (!pi->dma_region) {
+		if (!dma_supported(pi->port.dev, 0xffffffff)) {
+			printk(KERN_ERR "MPSC: Inadequate DMA support\n");
+			rc = -ENXIO;
+		} else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
+						MPSC_DMA_ALLOC_SIZE,
+						&pi->dma_region_p, GFP_KERNEL))
+				== NULL) {
+			printk(KERN_ERR "MPSC: Can't alloc Desc region\n");
+			rc = -ENOMEM;
+		}
+	}
+
+	return rc;
+}
+
+static void mpsc_free_ring_mem(struct mpsc_port_info *pi)
+{
+	pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line);
+
+	if (pi->dma_region) {
+		dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
+				pi->dma_region, pi->dma_region_p);
+		pi->dma_region = NULL;
+		pi->dma_region_p = (dma_addr_t)NULL;
+	}
+}
+
+static void mpsc_init_rings(struct mpsc_port_info *pi)
+{
+	struct mpsc_rx_desc *rxre;
+	struct mpsc_tx_desc *txre;
+	dma_addr_t dp, dp_p;
+	u8 *bp, *bp_p;
+	int i;
+
+	pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line);
+
+	BUG_ON(pi->dma_region == NULL);
+
+	memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE);
+
+	/*
+	 * Descriptors & buffers are multiples of cacheline size and must be
+	 * cacheline aligned.
+	 */
+	dp = ALIGN((u32)pi->dma_region, dma_get_cache_alignment());
+	dp_p = ALIGN((u32)pi->dma_region_p, dma_get_cache_alignment());
+
+	/*
+	 * Partition dma region into rx ring descriptor, rx buffers,
+	 * tx ring descriptors, and tx buffers.
+	 */
+	pi->rxr = dp;
+	pi->rxr_p = dp_p;
+	dp += MPSC_RXR_SIZE;
+	dp_p += MPSC_RXR_SIZE;
+
+	pi->rxb = (u8 *)dp;
+	pi->rxb_p = (u8 *)dp_p;
+	dp += MPSC_RXB_SIZE;
+	dp_p += MPSC_RXB_SIZE;
+
+	pi->rxr_posn = 0;
+
+	pi->txr = dp;
+	pi->txr_p = dp_p;
+	dp += MPSC_TXR_SIZE;
+	dp_p += MPSC_TXR_SIZE;
+
+	pi->txb = (u8 *)dp;
+	pi->txb_p = (u8 *)dp_p;
+
+	pi->txr_head = 0;
+	pi->txr_tail = 0;
+
+	/* Init rx ring descriptors */
+	dp = pi->rxr;
+	dp_p = pi->rxr_p;
+	bp = pi->rxb;
+	bp_p = pi->rxb_p;
+
+	for (i = 0; i < MPSC_RXR_ENTRIES; i++) {
+		rxre = (struct mpsc_rx_desc *)dp;
+
+		rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE);
+		rxre->bytecnt = cpu_to_be16(0);
+		rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O
+				| SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F
+				| SDMA_DESC_CMDSTAT_L);
+		rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE);
+		rxre->buf_ptr = cpu_to_be32(bp_p);
+
+		dp += MPSC_RXRE_SIZE;
+		dp_p += MPSC_RXRE_SIZE;
+		bp += MPSC_RXBE_SIZE;
+		bp_p += MPSC_RXBE_SIZE;
+	}
+	rxre->link = cpu_to_be32(pi->rxr_p);	/* Wrap last back to first */
+
+	/* Init tx ring descriptors */
+	dp = pi->txr;
+	dp_p = pi->txr_p;
+	bp = pi->txb;
+	bp_p = pi->txb_p;
+
+	for (i = 0; i < MPSC_TXR_ENTRIES; i++) {
+		txre = (struct mpsc_tx_desc *)dp;
+
+		txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE);
+		txre->buf_ptr = cpu_to_be32(bp_p);
+
+		dp += MPSC_TXRE_SIZE;
+		dp_p += MPSC_TXRE_SIZE;
+		bp += MPSC_TXBE_SIZE;
+		bp_p += MPSC_TXBE_SIZE;
+	}
+	txre->link = cpu_to_be32(pi->txr_p);	/* Wrap last back to first */
+
+	dma_cache_sync(pi->port.dev, (void *)pi->dma_region,
+			MPSC_DMA_ALLOC_SIZE, DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+			flush_dcache_range((ulong)pi->dma_region,
+					(ulong)pi->dma_region
+					+ MPSC_DMA_ALLOC_SIZE);
+#endif
+
+	return;
+}
+
+static void mpsc_uninit_rings(struct mpsc_port_info *pi)
+{
+	pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line);
+
+	BUG_ON(pi->dma_region == NULL);
+
+	pi->rxr = 0;
+	pi->rxr_p = 0;
+	pi->rxb = NULL;
+	pi->rxb_p = NULL;
+	pi->rxr_posn = 0;
+
+	pi->txr = 0;
+	pi->txr_p = 0;
+	pi->txb = NULL;
+	pi->txb_p = NULL;
+	pi->txr_head = 0;
+	pi->txr_tail = 0;
+}
+
+static int mpsc_make_ready(struct mpsc_port_info *pi)
+{
+	int rc;
+
+	pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line);
+
+	if (!pi->ready) {
+		mpsc_init_hw(pi);
+		if ((rc = mpsc_alloc_ring_mem(pi)))
+			return rc;
+		mpsc_init_rings(pi);
+		pi->ready = 1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int serial_polled;
+#endif
+
+/*
+ ******************************************************************************
+ *
+ * Interrupt Handling Routines
+ *
+ ******************************************************************************
+ */
+
+static int mpsc_rx_intr(struct mpsc_port_info *pi)
+{
+	struct mpsc_rx_desc *rxre;
+	struct tty_struct *tty = pi->port.state->port.tty;
+	u32	cmdstat, bytes_in, i;
+	int	rc = 0;
+	u8	*bp;
+	char	flag = TTY_NORMAL;
+
+	pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
+
+	rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE));
+
+	dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE,
+			DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+	if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+		invalidate_dcache_range((ulong)rxre,
+				(ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+
+	/*
+	 * Loop through Rx descriptors handling ones that have been completed.
+	 */
+	while (!((cmdstat = be32_to_cpu(rxre->cmdstat))
+				& SDMA_DESC_CMDSTAT_O)) {
+		bytes_in = be16_to_cpu(rxre->bytecnt);
+#ifdef CONFIG_CONSOLE_POLL
+		if (unlikely(serial_polled)) {
+			serial_polled = 0;
+			return 0;
+		}
+#endif
+		/* Following use of tty struct directly is deprecated */
+		if (unlikely(tty_buffer_request_room(tty, bytes_in)
+					< bytes_in)) {
+			if (tty->low_latency)
+				tty_flip_buffer_push(tty);
+			/*
+			 * If this failed then we will throw away the bytes
+			 * but must do so to clear interrupts.
+			 */
+		}
+
+		bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
+		dma_cache_sync(pi->port.dev, (void *)bp, MPSC_RXBE_SIZE,
+				DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+			invalidate_dcache_range((ulong)bp,
+					(ulong)bp + MPSC_RXBE_SIZE);
+#endif
+
+		/*
+		 * Other than for parity error, the manual provides little
+		 * info on what data will be in a frame flagged by any of
+		 * these errors.  For parity error, it is the last byte in
+		 * the buffer that had the error.  As for the rest, I guess
+		 * we'll assume there is no data in the buffer.
+		 * If there is...it gets lost.
+		 */
+		if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR
+						| SDMA_DESC_CMDSTAT_FR
+						| SDMA_DESC_CMDSTAT_OR))) {
+
+			pi->port.icount.rx++;
+
+			if (cmdstat & SDMA_DESC_CMDSTAT_BR) {	/* Break */
+				pi->port.icount.brk++;
+
+				if (uart_handle_break(&pi->port))
+					goto next_frame;
+			} else if (cmdstat & SDMA_DESC_CMDSTAT_FR) {
+				pi->port.icount.frame++;
+			} else if (cmdstat & SDMA_DESC_CMDSTAT_OR) {
+				pi->port.icount.overrun++;
+			}
+
+			cmdstat &= pi->port.read_status_mask;
+
+			if (cmdstat & SDMA_DESC_CMDSTAT_BR)
+				flag = TTY_BREAK;
+			else if (cmdstat & SDMA_DESC_CMDSTAT_FR)
+				flag = TTY_FRAME;
+			else if (cmdstat & SDMA_DESC_CMDSTAT_OR)
+				flag = TTY_OVERRUN;
+			else if (cmdstat & SDMA_DESC_CMDSTAT_PE)
+				flag = TTY_PARITY;
+		}
+
+		if (uart_handle_sysrq_char(&pi->port, *bp)) {
+			bp++;
+			bytes_in--;
+#ifdef CONFIG_CONSOLE_POLL
+			if (unlikely(serial_polled)) {
+				serial_polled = 0;
+				return 0;
+			}
+#endif
+			goto next_frame;
+		}
+
+		if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR
+						| SDMA_DESC_CMDSTAT_FR
+						| SDMA_DESC_CMDSTAT_OR)))
+				&& !(cmdstat & pi->port.ignore_status_mask)) {
+			tty_insert_flip_char(tty, *bp, flag);
+		} else {
+			for (i=0; i<bytes_in; i++)
+				tty_insert_flip_char(tty, *bp++, TTY_NORMAL);
+
+			pi->port.icount.rx += bytes_in;
+		}
+
+next_frame:
+		rxre->bytecnt = cpu_to_be16(0);
+		wmb();
+		rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O
+				| SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F
+				| SDMA_DESC_CMDSTAT_L);
+		wmb();
+		dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE,
+				DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+			flush_dcache_range((ulong)rxre,
+					(ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+
+		/* Advance to next descriptor */
+		pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1);
+		rxre = (struct mpsc_rx_desc *)
+			(pi->rxr + (pi->rxr_posn * MPSC_RXRE_SIZE));
+		dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE,
+				DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+			invalidate_dcache_range((ulong)rxre,
+					(ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+		rc = 1;
+	}
+
+	/* Restart rx engine, if its stopped */
+	if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
+		mpsc_start_rx(pi);
+
+	tty_flip_buffer_push(tty);
+	return rc;
+}
+
+static void mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr)
+{
+	struct mpsc_tx_desc *txre;
+
+	txre = (struct mpsc_tx_desc *)(pi->txr
+			+ (pi->txr_head * MPSC_TXRE_SIZE));
+
+	txre->bytecnt = cpu_to_be16(count);
+	txre->shadow = txre->bytecnt;
+	wmb();			/* ensure cmdstat is last field updated */
+	txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F
+			| SDMA_DESC_CMDSTAT_L
+			| ((intr) ? SDMA_DESC_CMDSTAT_EI : 0));
+	wmb();
+	dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE,
+			DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+	if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+		flush_dcache_range((ulong)txre,
+				(ulong)txre + MPSC_TXRE_SIZE);
+#endif
+}
+
+static void mpsc_copy_tx_data(struct mpsc_port_info *pi)
+{
+	struct circ_buf *xmit = &pi->port.state->xmit;
+	u8 *bp;
+	u32 i;
+
+	/* Make sure the desc ring isn't full */
+	while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES)
+			< (MPSC_TXR_ENTRIES - 1)) {
+		if (pi->port.x_char) {
+			/*
+			 * Ideally, we should use the TCS field in
+			 * CHR_1 to put the x_char out immediately but
+			 * errata prevents us from being able to read
+			 * CHR_2 to know that its safe to write to
+			 * CHR_1.  Instead, just put it in-band with
+			 * all the other Tx data.
+			 */
+			bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
+			*bp = pi->port.x_char;
+			pi->port.x_char = 0;
+			i = 1;
+		} else if (!uart_circ_empty(xmit)
+				&& !uart_tx_stopped(&pi->port)) {
+			i = min((u32)MPSC_TXBE_SIZE,
+				(u32)uart_circ_chars_pending(xmit));
+			i = min(i, (u32)CIRC_CNT_TO_END(xmit->head, xmit->tail,
+				UART_XMIT_SIZE));
+			bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
+			memcpy(bp, &xmit->buf[xmit->tail], i);
+			xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1);
+
+			if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+				uart_write_wakeup(&pi->port);
+		} else { /* All tx data copied into ring bufs */
+			return;
+		}
+
+		dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE,
+				DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+			flush_dcache_range((ulong)bp,
+					(ulong)bp + MPSC_TXBE_SIZE);
+#endif
+		mpsc_setup_tx_desc(pi, i, 1);
+
+		/* Advance to next descriptor */
+		pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
+	}
+}
+
+static int mpsc_tx_intr(struct mpsc_port_info *pi)
+{
+	struct mpsc_tx_desc *txre;
+	int rc = 0;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&pi->tx_lock, iflags);
+
+	if (!mpsc_sdma_tx_active(pi)) {
+		txre = (struct mpsc_tx_desc *)(pi->txr
+				+ (pi->txr_tail * MPSC_TXRE_SIZE));
+
+		dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE,
+				DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+			invalidate_dcache_range((ulong)txre,
+					(ulong)txre + MPSC_TXRE_SIZE);
+#endif
+
+		while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) {
+			rc = 1;
+			pi->port.icount.tx += be16_to_cpu(txre->bytecnt);
+			pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1);
+
+			/* If no more data to tx, fall out of loop */
+			if (pi->txr_head == pi->txr_tail)
+				break;
+
+			txre = (struct mpsc_tx_desc *)(pi->txr
+					+ (pi->txr_tail * MPSC_TXRE_SIZE));
+			dma_cache_sync(pi->port.dev, (void *)txre,
+					MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+				invalidate_dcache_range((ulong)txre,
+						(ulong)txre + MPSC_TXRE_SIZE);
+#endif
+		}
+
+		mpsc_copy_tx_data(pi);
+		mpsc_sdma_start_tx(pi);	/* start next desc if ready */
+	}
+
+	spin_unlock_irqrestore(&pi->tx_lock, iflags);
+	return rc;
+}
+
+/*
+ * This is the driver's interrupt handler.  To avoid a race, we first clear
+ * the interrupt, then handle any completed Rx/Tx descriptors.  When done
+ * handling those descriptors, we restart the Rx/Tx engines if they're stopped.
+ */
+static irqreturn_t mpsc_sdma_intr(int irq, void *dev_id)
+{
+	struct mpsc_port_info *pi = dev_id;
+	ulong iflags;
+	int rc = IRQ_NONE;
+
+	pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line);
+
+	spin_lock_irqsave(&pi->port.lock, iflags);
+	mpsc_sdma_intr_ack(pi);
+	if (mpsc_rx_intr(pi))
+		rc = IRQ_HANDLED;
+	if (mpsc_tx_intr(pi))
+		rc = IRQ_HANDLED;
+	spin_unlock_irqrestore(&pi->port.lock, iflags);
+
+	pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line);
+	return rc;
+}
+
+/*
+ ******************************************************************************
+ *
+ * serial_core.c Interface routines
+ *
+ ******************************************************************************
+ */
+static uint mpsc_tx_empty(struct uart_port *port)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	ulong iflags;
+	uint rc;
+
+	spin_lock_irqsave(&pi->port.lock, iflags);
+	rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT;
+	spin_unlock_irqrestore(&pi->port.lock, iflags);
+
+	return rc;
+}
+
+static void mpsc_set_mctrl(struct uart_port *port, uint mctrl)
+{
+	/* Have no way to set modem control lines AFAICT */
+}
+
+static uint mpsc_get_mctrl(struct uart_port *port)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	u32 mflags, status;
+
+	status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m
+		: readl(pi->mpsc_base + MPSC_CHR_10);
+
+	mflags = 0;
+	if (status & 0x1)
+		mflags |= TIOCM_CTS;
+	if (status & 0x2)
+		mflags |= TIOCM_CAR;
+
+	return mflags | TIOCM_DSR;	/* No way to tell if DSR asserted */
+}
+
+static void mpsc_stop_tx(struct uart_port *port)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+
+	pr_debug("mpsc_stop_tx[%d]\n", port->line);
+
+	mpsc_freeze(pi);
+}
+
+static void mpsc_start_tx(struct uart_port *port)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&pi->tx_lock, iflags);
+
+	mpsc_unfreeze(pi);
+	mpsc_copy_tx_data(pi);
+	mpsc_sdma_start_tx(pi);
+
+	spin_unlock_irqrestore(&pi->tx_lock, iflags);
+
+	pr_debug("mpsc_start_tx[%d]\n", port->line);
+}
+
+static void mpsc_start_rx(struct mpsc_port_info *pi)
+{
+	pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line);
+
+	if (pi->rcv_data) {
+		mpsc_enter_hunt(pi);
+		mpsc_sdma_cmd(pi, SDMA_SDCM_ERD);
+	}
+}
+
+static void mpsc_stop_rx(struct uart_port *port)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+
+	pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line);
+
+	if (pi->mirror_regs) {
+		writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_RA,
+				pi->mpsc_base + MPSC_CHR_2);
+		/* Erratum prevents reading CHR_2 so just delay for a while */
+		udelay(100);
+	} else {
+		writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_RA,
+				pi->mpsc_base + MPSC_CHR_2);
+
+		while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_RA)
+			udelay(10);
+	}
+
+	mpsc_sdma_cmd(pi, SDMA_SDCM_AR);
+}
+
+static void mpsc_enable_ms(struct uart_port *port)
+{
+}
+
+static void mpsc_break_ctl(struct uart_port *port, int ctl)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	ulong	flags;
+	u32	v;
+
+	v = ctl ? 0x00ff0000 : 0;
+
+	spin_lock_irqsave(&pi->port.lock, flags);
+	if (pi->mirror_regs)
+		pi->MPSC_CHR_1_m = v;
+	writel(v, pi->mpsc_base + MPSC_CHR_1);
+	spin_unlock_irqrestore(&pi->port.lock, flags);
+}
+
+static int mpsc_startup(struct uart_port *port)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	u32 flag = 0;
+	int rc;
+
+	pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n",
+		port->line, pi->port.irq);
+
+	if ((rc = mpsc_make_ready(pi)) == 0) {
+		/* Setup IRQ handler */
+		mpsc_sdma_intr_ack(pi);
+
+		/* If irq's are shared, need to set flag */
+		if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq)
+			flag = IRQF_SHARED;
+
+		if (request_irq(pi->port.irq, mpsc_sdma_intr, flag,
+					"mpsc-sdma", pi))
+			printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n",
+					pi->port.irq);
+
+		mpsc_sdma_intr_unmask(pi, 0xf);
+		mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p
+					+ (pi->rxr_posn * MPSC_RXRE_SIZE)));
+	}
+
+	return rc;
+}
+
+static void mpsc_shutdown(struct uart_port *port)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+
+	pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line);
+
+	mpsc_sdma_stop(pi);
+	free_irq(pi->port.irq, pi);
+}
+
+static void mpsc_set_termios(struct uart_port *port, struct ktermios *termios,
+		 struct ktermios *old)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	u32 baud;
+	ulong flags;
+	u32 chr_bits, stop_bits, par;
+
+	pi->c_iflag = termios->c_iflag;
+	pi->c_cflag = termios->c_cflag;
+
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		chr_bits = MPSC_MPCR_CL_5;
+		break;
+	case CS6:
+		chr_bits = MPSC_MPCR_CL_6;
+		break;
+	case CS7:
+		chr_bits = MPSC_MPCR_CL_7;
+		break;
+	case CS8:
+	default:
+		chr_bits = MPSC_MPCR_CL_8;
+		break;
+	}
+
+	if (termios->c_cflag & CSTOPB)
+		stop_bits = MPSC_MPCR_SBL_2;
+	else
+		stop_bits = MPSC_MPCR_SBL_1;
+
+	par = MPSC_CHR_2_PAR_EVEN;
+	if (termios->c_cflag & PARENB)
+		if (termios->c_cflag & PARODD)
+			par = MPSC_CHR_2_PAR_ODD;
+#ifdef	CMSPAR
+		if (termios->c_cflag & CMSPAR) {
+			if (termios->c_cflag & PARODD)
+				par = MPSC_CHR_2_PAR_MARK;
+			else
+				par = MPSC_CHR_2_PAR_SPACE;
+		}
+#endif
+
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk);
+
+	spin_lock_irqsave(&pi->port.lock, flags);
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	mpsc_set_char_length(pi, chr_bits);
+	mpsc_set_stop_bit_length(pi, stop_bits);
+	mpsc_set_parity(pi, par);
+	mpsc_set_baudrate(pi, baud);
+
+	/* Characters/events to read */
+	pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR;
+
+	if (termios->c_iflag & INPCK)
+		pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE
+			| SDMA_DESC_CMDSTAT_FR;
+
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR;
+
+	/* Characters/events to ignore */
+	pi->port.ignore_status_mask = 0;
+
+	if (termios->c_iflag & IGNPAR)
+		pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE
+			| SDMA_DESC_CMDSTAT_FR;
+
+	if (termios->c_iflag & IGNBRK) {
+		pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR;
+
+		if (termios->c_iflag & IGNPAR)
+			pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR;
+	}
+
+	if ((termios->c_cflag & CREAD)) {
+		if (!pi->rcv_data) {
+			pi->rcv_data = 1;
+			mpsc_start_rx(pi);
+		}
+	} else if (pi->rcv_data) {
+		mpsc_stop_rx(port);
+		pi->rcv_data = 0;
+	}
+
+	spin_unlock_irqrestore(&pi->port.lock, flags);
+}
+
+static const char *mpsc_type(struct uart_port *port)
+{
+	pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME);
+	return MPSC_DRIVER_NAME;
+}
+
+static int mpsc_request_port(struct uart_port *port)
+{
+	/* Should make chip/platform specific call */
+	return 0;
+}
+
+static void mpsc_release_port(struct uart_port *port)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+
+	if (pi->ready) {
+		mpsc_uninit_rings(pi);
+		mpsc_free_ring_mem(pi);
+		pi->ready = 0;
+	}
+}
+
+static void mpsc_config_port(struct uart_port *port, int flags)
+{
+}
+
+static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	int rc = 0;
+
+	pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line);
+
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC)
+		rc = -EINVAL;
+	else if (pi->port.irq != ser->irq)
+		rc = -EINVAL;
+	else if (ser->io_type != SERIAL_IO_MEM)
+		rc = -EINVAL;
+	else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */
+		rc = -EINVAL;
+	else if ((void *)pi->port.mapbase != ser->iomem_base)
+		rc = -EINVAL;
+	else if (pi->port.iobase != ser->port)
+		rc = -EINVAL;
+	else if (ser->hub6 != 0)
+		rc = -EINVAL;
+
+	return rc;
+}
+#ifdef CONFIG_CONSOLE_POLL
+/* Serial polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static char poll_buf[2048];
+static int poll_ptr;
+static int poll_cnt;
+static void mpsc_put_poll_char(struct uart_port *port,
+							   unsigned char c);
+
+static int mpsc_get_poll_char(struct uart_port *port)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	struct mpsc_rx_desc *rxre;
+	u32	cmdstat, bytes_in, i;
+	u8	*bp;
+
+	if (!serial_polled)
+		serial_polled = 1;
+
+	pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
+
+	if (poll_cnt) {
+		poll_cnt--;
+		return poll_buf[poll_ptr++];
+	}
+	poll_ptr = 0;
+	poll_cnt = 0;
+
+	while (poll_cnt == 0) {
+		rxre = (struct mpsc_rx_desc *)(pi->rxr +
+		       (pi->rxr_posn*MPSC_RXRE_SIZE));
+		dma_cache_sync(pi->port.dev, (void *)rxre,
+			       MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+			invalidate_dcache_range((ulong)rxre,
+			(ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+		/*
+		 * Loop through Rx descriptors handling ones that have
+		 * been completed.
+		 */
+		while (poll_cnt == 0 &&
+		       !((cmdstat = be32_to_cpu(rxre->cmdstat)) &
+			 SDMA_DESC_CMDSTAT_O)){
+			bytes_in = be16_to_cpu(rxre->bytecnt);
+			bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
+			dma_cache_sync(pi->port.dev, (void *) bp,
+				       MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+				invalidate_dcache_range((ulong)bp,
+					(ulong)bp + MPSC_RXBE_SIZE);
+#endif
+			if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
+			 SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
+				!(cmdstat & pi->port.ignore_status_mask)) {
+				poll_buf[poll_cnt] = *bp;
+				poll_cnt++;
+			} else {
+				for (i = 0; i < bytes_in; i++) {
+					poll_buf[poll_cnt] = *bp++;
+					poll_cnt++;
+				}
+				pi->port.icount.rx += bytes_in;
+			}
+			rxre->bytecnt = cpu_to_be16(0);
+			wmb();
+			rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
+						    SDMA_DESC_CMDSTAT_EI |
+						    SDMA_DESC_CMDSTAT_F |
+						    SDMA_DESC_CMDSTAT_L);
+			wmb();
+			dma_cache_sync(pi->port.dev, (void *)rxre,
+				       MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+				flush_dcache_range((ulong)rxre,
+					   (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+
+			/* Advance to next descriptor */
+			pi->rxr_posn = (pi->rxr_posn + 1) &
+				(MPSC_RXR_ENTRIES - 1);
+			rxre = (struct mpsc_rx_desc *)(pi->rxr +
+				       (pi->rxr_posn * MPSC_RXRE_SIZE));
+			dma_cache_sync(pi->port.dev, (void *)rxre,
+				       MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+				invalidate_dcache_range((ulong)rxre,
+						(ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+		}
+
+		/* Restart rx engine, if its stopped */
+		if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
+			mpsc_start_rx(pi);
+	}
+	if (poll_cnt) {
+		poll_cnt--;
+		return poll_buf[poll_ptr++];
+	}
+
+	return 0;
+}
+
+
+static void mpsc_put_poll_char(struct uart_port *port,
+			 unsigned char c)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	u32 data;
+
+	data = readl(pi->mpsc_base + MPSC_MPCR);
+	writeb(c, pi->mpsc_base + MPSC_CHR_1);
+	mb();
+	data = readl(pi->mpsc_base + MPSC_CHR_2);
+	data |= MPSC_CHR_2_TTCS;
+	writel(data, pi->mpsc_base + MPSC_CHR_2);
+	mb();
+
+	while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS);
+}
+#endif
+
+static struct uart_ops mpsc_pops = {
+	.tx_empty	= mpsc_tx_empty,
+	.set_mctrl	= mpsc_set_mctrl,
+	.get_mctrl	= mpsc_get_mctrl,
+	.stop_tx	= mpsc_stop_tx,
+	.start_tx	= mpsc_start_tx,
+	.stop_rx	= mpsc_stop_rx,
+	.enable_ms	= mpsc_enable_ms,
+	.break_ctl	= mpsc_break_ctl,
+	.startup	= mpsc_startup,
+	.shutdown	= mpsc_shutdown,
+	.set_termios	= mpsc_set_termios,
+	.type		= mpsc_type,
+	.release_port	= mpsc_release_port,
+	.request_port	= mpsc_request_port,
+	.config_port	= mpsc_config_port,
+	.verify_port	= mpsc_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char = mpsc_get_poll_char,
+	.poll_put_char = mpsc_put_poll_char,
+#endif
+};
+
+/*
+ ******************************************************************************
+ *
+ * Console Interface Routines
+ *
+ ******************************************************************************
+ */
+
+#ifdef CONFIG_SERIAL_MPSC_CONSOLE
+static void mpsc_console_write(struct console *co, const char *s, uint count)
+{
+	struct mpsc_port_info *pi = &mpsc_ports[co->index];
+	u8 *bp, *dp, add_cr = 0;
+	int i;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&pi->tx_lock, iflags);
+
+	while (pi->txr_head != pi->txr_tail) {
+		while (mpsc_sdma_tx_active(pi))
+			udelay(100);
+		mpsc_sdma_intr_ack(pi);
+		mpsc_tx_intr(pi);
+	}
+
+	while (mpsc_sdma_tx_active(pi))
+		udelay(100);
+
+	while (count > 0) {
+		bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
+
+		for (i = 0; i < MPSC_TXBE_SIZE; i++) {
+			if (count == 0)
+				break;
+
+			if (add_cr) {
+				*(dp++) = '\r';
+				add_cr = 0;
+			} else {
+				*(dp++) = *s;
+
+				if (*(s++) == '\n') { /* add '\r' after '\n' */
+					add_cr = 1;
+					count++;
+				}
+			}
+
+			count--;
+		}
+
+		dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE,
+				DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+			flush_dcache_range((ulong)bp,
+					(ulong)bp + MPSC_TXBE_SIZE);
+#endif
+		mpsc_setup_tx_desc(pi, i, 0);
+		pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
+		mpsc_sdma_start_tx(pi);
+
+		while (mpsc_sdma_tx_active(pi))
+			udelay(100);
+
+		pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1);
+	}
+
+	spin_unlock_irqrestore(&pi->tx_lock, iflags);
+}
+
+static int __init mpsc_console_setup(struct console *co, char *options)
+{
+	struct mpsc_port_info *pi;
+	int baud, bits, parity, flow;
+
+	pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options);
+
+	if (co->index >= MPSC_NUM_CTLRS)
+		co->index = 0;
+
+	pi = &mpsc_ports[co->index];
+
+	baud = pi->default_baud;
+	bits = pi->default_bits;
+	parity = pi->default_parity;
+	flow = pi->default_flow;
+
+	if (!pi->port.ops)
+		return -ENODEV;
+
+	spin_lock_init(&pi->port.lock);	/* Temporary fix--copied from 8250.c */
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(&pi->port, co, baud, parity, bits, flow);
+}
+
+static struct console mpsc_console = {
+	.name	= MPSC_DEV_NAME,
+	.write	= mpsc_console_write,
+	.device	= uart_console_device,
+	.setup	= mpsc_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+	.data	= &mpsc_reg,
+};
+
+static int __init mpsc_late_console_init(void)
+{
+	pr_debug("mpsc_late_console_init: Enter\n");
+
+	if (!(mpsc_console.flags & CON_ENABLED))
+		register_console(&mpsc_console);
+	return 0;
+}
+
+late_initcall(mpsc_late_console_init);
+
+#define MPSC_CONSOLE	&mpsc_console
+#else
+#define MPSC_CONSOLE	NULL
+#endif
+/*
+ ******************************************************************************
+ *
+ * Dummy Platform Driver to extract & map shared register regions
+ *
+ ******************************************************************************
+ */
+static void mpsc_resource_err(char *s)
+{
+	printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s);
+}
+
+static int mpsc_shared_map_regs(struct platform_device *pd)
+{
+	struct resource	*r;
+
+	if ((r = platform_get_resource(pd, IORESOURCE_MEM,
+					MPSC_ROUTING_BASE_ORDER))
+			&& request_mem_region(r->start,
+				MPSC_ROUTING_REG_BLOCK_SIZE,
+				"mpsc_routing_regs")) {
+		mpsc_shared_regs.mpsc_routing_base = ioremap(r->start,
+				MPSC_ROUTING_REG_BLOCK_SIZE);
+		mpsc_shared_regs.mpsc_routing_base_p = r->start;
+	} else {
+		mpsc_resource_err("MPSC routing base");
+		return -ENOMEM;
+	}
+
+	if ((r = platform_get_resource(pd, IORESOURCE_MEM,
+					MPSC_SDMA_INTR_BASE_ORDER))
+			&& request_mem_region(r->start,
+				MPSC_SDMA_INTR_REG_BLOCK_SIZE,
+				"sdma_intr_regs")) {
+		mpsc_shared_regs.sdma_intr_base = ioremap(r->start,
+			MPSC_SDMA_INTR_REG_BLOCK_SIZE);
+		mpsc_shared_regs.sdma_intr_base_p = r->start;
+	} else {
+		iounmap(mpsc_shared_regs.mpsc_routing_base);
+		release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
+				MPSC_ROUTING_REG_BLOCK_SIZE);
+		mpsc_resource_err("SDMA intr base");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void mpsc_shared_unmap_regs(void)
+{
+	if (!mpsc_shared_regs.mpsc_routing_base) {
+		iounmap(mpsc_shared_regs.mpsc_routing_base);
+		release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
+				MPSC_ROUTING_REG_BLOCK_SIZE);
+	}
+	if (!mpsc_shared_regs.sdma_intr_base) {
+		iounmap(mpsc_shared_regs.sdma_intr_base);
+		release_mem_region(mpsc_shared_regs.sdma_intr_base_p,
+				MPSC_SDMA_INTR_REG_BLOCK_SIZE);
+	}
+
+	mpsc_shared_regs.mpsc_routing_base = NULL;
+	mpsc_shared_regs.sdma_intr_base = NULL;
+
+	mpsc_shared_regs.mpsc_routing_base_p = 0;
+	mpsc_shared_regs.sdma_intr_base_p = 0;
+}
+
+static int mpsc_shared_drv_probe(struct platform_device *dev)
+{
+	struct mpsc_shared_pdata	*pdata;
+	int				 rc = -ENODEV;
+
+	if (dev->id == 0) {
+		if (!(rc = mpsc_shared_map_regs(dev))) {
+			pdata = (struct mpsc_shared_pdata *)
+				dev->dev.platform_data;
+
+			mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val;
+			mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val;
+			mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val;
+			mpsc_shared_regs.SDMA_INTR_CAUSE_m =
+				pdata->intr_cause_val;
+			mpsc_shared_regs.SDMA_INTR_MASK_m =
+				pdata->intr_mask_val;
+
+			rc = 0;
+		}
+	}
+
+	return rc;
+}
+
+static int mpsc_shared_drv_remove(struct platform_device *dev)
+{
+	int	rc = -ENODEV;
+
+	if (dev->id == 0) {
+		mpsc_shared_unmap_regs();
+		mpsc_shared_regs.MPSC_MRR_m = 0;
+		mpsc_shared_regs.MPSC_RCRR_m = 0;
+		mpsc_shared_regs.MPSC_TCRR_m = 0;
+		mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0;
+		mpsc_shared_regs.SDMA_INTR_MASK_m = 0;
+		rc = 0;
+	}
+
+	return rc;
+}
+
+static struct platform_driver mpsc_shared_driver = {
+	.probe	= mpsc_shared_drv_probe,
+	.remove	= mpsc_shared_drv_remove,
+	.driver	= {
+		.name	= MPSC_SHARED_NAME,
+	},
+};
+
+/*
+ ******************************************************************************
+ *
+ * Driver Interface Routines
+ *
+ ******************************************************************************
+ */
+static struct uart_driver mpsc_reg = {
+	.owner		= THIS_MODULE,
+	.driver_name	= MPSC_DRIVER_NAME,
+	.dev_name	= MPSC_DEV_NAME,
+	.major		= MPSC_MAJOR,
+	.minor		= MPSC_MINOR_START,
+	.nr		= MPSC_NUM_CTLRS,
+	.cons		= MPSC_CONSOLE,
+};
+
+static int mpsc_drv_map_regs(struct mpsc_port_info *pi,
+		struct platform_device *pd)
+{
+	struct resource	*r;
+
+	if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER))
+			&& request_mem_region(r->start, MPSC_REG_BLOCK_SIZE,
+			"mpsc_regs")) {
+		pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE);
+		pi->mpsc_base_p = r->start;
+	} else {
+		mpsc_resource_err("MPSC base");
+		goto err;
+	}
+
+	if ((r = platform_get_resource(pd, IORESOURCE_MEM,
+					MPSC_SDMA_BASE_ORDER))
+			&& request_mem_region(r->start,
+				MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) {
+		pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE);
+		pi->sdma_base_p = r->start;
+	} else {
+		mpsc_resource_err("SDMA base");
+		if (pi->mpsc_base) {
+			iounmap(pi->mpsc_base);
+			pi->mpsc_base = NULL;
+		}
+		goto err;
+	}
+
+	if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER))
+			&& request_mem_region(r->start,
+				MPSC_BRG_REG_BLOCK_SIZE, "brg_regs")) {
+		pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE);
+		pi->brg_base_p = r->start;
+	} else {
+		mpsc_resource_err("BRG base");
+		if (pi->mpsc_base) {
+			iounmap(pi->mpsc_base);
+			pi->mpsc_base = NULL;
+		}
+		if (pi->sdma_base) {
+			iounmap(pi->sdma_base);
+			pi->sdma_base = NULL;
+		}
+		goto err;
+	}
+	return 0;
+
+err:
+	return -ENOMEM;
+}
+
+static void mpsc_drv_unmap_regs(struct mpsc_port_info *pi)
+{
+	if (!pi->mpsc_base) {
+		iounmap(pi->mpsc_base);
+		release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE);
+	}
+	if (!pi->sdma_base) {
+		iounmap(pi->sdma_base);
+		release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE);
+	}
+	if (!pi->brg_base) {
+		iounmap(pi->brg_base);
+		release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE);
+	}
+
+	pi->mpsc_base = NULL;
+	pi->sdma_base = NULL;
+	pi->brg_base = NULL;
+
+	pi->mpsc_base_p = 0;
+	pi->sdma_base_p = 0;
+	pi->brg_base_p = 0;
+}
+
+static void mpsc_drv_get_platform_data(struct mpsc_port_info *pi,
+		struct platform_device *pd, int num)
+{
+	struct mpsc_pdata	*pdata;
+
+	pdata = (struct mpsc_pdata *)pd->dev.platform_data;
+
+	pi->port.uartclk = pdata->brg_clk_freq;
+	pi->port.iotype = UPIO_MEM;
+	pi->port.line = num;
+	pi->port.type = PORT_MPSC;
+	pi->port.fifosize = MPSC_TXBE_SIZE;
+	pi->port.membase = pi->mpsc_base;
+	pi->port.mapbase = (ulong)pi->mpsc_base;
+	pi->port.ops = &mpsc_pops;
+
+	pi->mirror_regs = pdata->mirror_regs;
+	pi->cache_mgmt = pdata->cache_mgmt;
+	pi->brg_can_tune = pdata->brg_can_tune;
+	pi->brg_clk_src = pdata->brg_clk_src;
+	pi->mpsc_max_idle = pdata->max_idle;
+	pi->default_baud = pdata->default_baud;
+	pi->default_bits = pdata->default_bits;
+	pi->default_parity = pdata->default_parity;
+	pi->default_flow = pdata->default_flow;
+
+	/* Initial values of mirrored regs */
+	pi->MPSC_CHR_1_m = pdata->chr_1_val;
+	pi->MPSC_CHR_2_m = pdata->chr_2_val;
+	pi->MPSC_CHR_10_m = pdata->chr_10_val;
+	pi->MPSC_MPCR_m = pdata->mpcr_val;
+	pi->BRG_BCR_m = pdata->bcr_val;
+
+	pi->shared_regs = &mpsc_shared_regs;
+
+	pi->port.irq = platform_get_irq(pd, 0);
+}
+
+static int mpsc_drv_probe(struct platform_device *dev)
+{
+	struct mpsc_port_info	*pi;
+	int			rc = -ENODEV;
+
+	pr_debug("mpsc_drv_probe: Adding MPSC %d\n", dev->id);
+
+	if (dev->id < MPSC_NUM_CTLRS) {
+		pi = &mpsc_ports[dev->id];
+
+		if (!(rc = mpsc_drv_map_regs(pi, dev))) {
+			mpsc_drv_get_platform_data(pi, dev, dev->id);
+			pi->port.dev = &dev->dev;
+
+			if (!(rc = mpsc_make_ready(pi))) {
+				spin_lock_init(&pi->tx_lock);
+				if (!(rc = uart_add_one_port(&mpsc_reg,
+								&pi->port))) {
+					rc = 0;
+				} else {
+					mpsc_release_port((struct uart_port *)
+							pi);
+					mpsc_drv_unmap_regs(pi);
+				}
+			} else {
+				mpsc_drv_unmap_regs(pi);
+			}
+		}
+	}
+
+	return rc;
+}
+
+static int mpsc_drv_remove(struct platform_device *dev)
+{
+	pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id);
+
+	if (dev->id < MPSC_NUM_CTLRS) {
+		uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port);
+		mpsc_release_port((struct uart_port *)
+				&mpsc_ports[dev->id].port);
+		mpsc_drv_unmap_regs(&mpsc_ports[dev->id]);
+		return 0;
+	} else {
+		return -ENODEV;
+	}
+}
+
+static struct platform_driver mpsc_driver = {
+	.probe	= mpsc_drv_probe,
+	.remove	= mpsc_drv_remove,
+	.driver	= {
+		.name	= MPSC_CTLR_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init mpsc_drv_init(void)
+{
+	int	rc;
+
+	printk(KERN_INFO "Serial: MPSC driver\n");
+
+	memset(mpsc_ports, 0, sizeof(mpsc_ports));
+	memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
+
+	if (!(rc = uart_register_driver(&mpsc_reg))) {
+		if (!(rc = platform_driver_register(&mpsc_shared_driver))) {
+			if ((rc = platform_driver_register(&mpsc_driver))) {
+				platform_driver_unregister(&mpsc_shared_driver);
+				uart_unregister_driver(&mpsc_reg);
+			}
+		} else {
+			uart_unregister_driver(&mpsc_reg);
+		}
+	}
+
+	return rc;
+}
+
+static void __exit mpsc_drv_exit(void)
+{
+	platform_driver_unregister(&mpsc_driver);
+	platform_driver_unregister(&mpsc_shared_driver);
+	uart_unregister_driver(&mpsc_reg);
+	memset(mpsc_ports, 0, sizeof(mpsc_ports));
+	memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
+}
+
+module_init(mpsc_drv_init);
+module_exit(mpsc_drv_exit);
+
+MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
+MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver");
+MODULE_VERSION(MPSC_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
+MODULE_ALIAS("platform:" MPSC_CTLR_NAME);