diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-07-26 06:09:27 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-07-26 06:09:27 (GMT) |
commit | d5ef642355bdd9b383ff5c18cbc6102a06eecbaf (patch) | |
tree | fcf78d33c1790c6c24efbfd0c3695f7874f053d7 /drivers/tty/serial | |
parent | f549953c15deab4c54708b39af86d4edecc6cddc (diff) | |
parent | def90f4239f094f3846c108c1c41a4cd55c33e8e (diff) | |
download | linux-d5ef642355bdd9b383ff5c18cbc6102a06eecbaf.tar.xz |
Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits)
amba pl011: workaround for uart registers lockup
n_gsm: fix the wrong FCS handling
pch_uart: add missing comment about OKI ML7223
pch_uart: Add MSI support
tty: fix "IRQ45: nobody cared"
PTI feature to allow user to name and mark masterchannel request.
0 for o PTI Makefile bug.
tty: serial: samsung.c remove legacy PM code.
SERIAL: SC26xx: Fix link error.
serial: mrst_max3110: initialize waitqueue earlier
mrst_max3110: Change max missing message priority.
tty: s5pv210: Add delay loop on fifo reset function for UART
tty/serial: Fix XSCALE serial ports, e.g. ce4100
serial: bfin_5xx: fix off-by-one with resource size
drivers/tty: use printk_ratelimited() instead of printk_ratelimit()
tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs
tty: n_gsm: Add raw-ip support
tty: n_gsm: expose gsmtty device nodes at ldisc open time
pch_phub: Fix register miss-setting issue
serial: 8250, increase PASS_LIMIT
...
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r-- | drivers/tty/serial/8250.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/8250_pci.c | 183 | ||||
-rw-r--r-- | drivers/tty/serial/Kconfig | 2 | ||||
-rw-r--r-- | drivers/tty/serial/pch_uart.c | 11 | ||||
-rw-r--r-- | drivers/tty/serial/s5pv210.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/samsung.c | 27 |
6 files changed, 211 insertions, 20 deletions
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index b4129f5..f2dfec8 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -81,7 +81,7 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */ #define DEBUG_INTR(fmt...) do { } while (0) #endif -#define PASS_LIMIT 256 +#define PASS_LIMIT 512 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) @@ -1107,7 +1107,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) */ DEBUG_AUTOCONF("Xscale "); up->port.type = PORT_XSCALE; - up->capabilities |= UART_CAP_UUE; + up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE; return; } } else { diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index cf35e0d..6b887d9 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -39,6 +39,7 @@ struct pci_serial_quirk { u32 device; u32 subvendor; u32 subdevice; + int (*probe)(struct pci_dev *dev); int (*init)(struct pci_dev *dev); int (*setup)(struct serial_private *, const struct pciserial_board *, @@ -56,6 +57,9 @@ struct serial_private { int line[0]; }; +static int pci_default_setup(struct serial_private*, + const struct pciserial_board*, struct uart_port*, int); + static void moan_device(const char *str, struct pci_dev *dev) { printk(KERN_WARNING @@ -571,6 +575,28 @@ static const struct timedia_struct { { 8, timedia_eight_port } }; +/* + * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of + * listing them individually, this driver merely grabs them all with + * PCI_ANY_ID. Some of these devices, however, also feature a parallel port, + * and should be left free to be claimed by parport_serial instead. + */ +static int pci_timedia_probe(struct pci_dev *dev) +{ + /* + * Check the third digit of the subdevice ID + * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) + */ + if ((dev->subsystem_device & 0x00f0) >= 0x70) { + dev_info(&dev->dev, + "ignoring Timedia subdevice %04x for parport_serial\n", + dev->subsystem_device); + return -ENODEV; + } + + return 0; +} + static int pci_timedia_init(struct pci_dev *dev) { const unsigned short *ids; @@ -752,6 +778,62 @@ pci_ni8430_setup(struct serial_private *priv, return setup_port(priv, port, bar, offset, board->reg_shift); } +static int pci_netmos_9900_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar; + + if ((priv->dev->subsystem_device & 0xff00) == 0x3000) { + /* netmos apparently orders BARs by datasheet layout, so serial + * ports get BARs 0 and 3 (or 1 and 4 for memmapped) + */ + bar = 3 * idx; + + return setup_port(priv, port, bar, 0, board->reg_shift); + } else { + return pci_default_setup(priv, board, port, idx); + } +} + +/* the 99xx series comes with a range of device IDs and a variety + * of capabilities: + * + * 9900 has varying capabilities and can cascade to sub-controllers + * (cascading should be purely internal) + * 9904 is hardwired with 4 serial ports + * 9912 and 9922 are hardwired with 2 serial ports + */ +static int pci_netmos_9900_numports(struct pci_dev *dev) +{ + unsigned int c = dev->class; + unsigned int pi; + unsigned short sub_serports; + + pi = (c & 0xff); + + if (pi == 2) { + return 1; + } else if ((pi == 0) && + (dev->device == PCI_DEVICE_ID_NETMOS_9900)) { + /* two possibilities: 0x30ps encodes number of parallel and + * serial ports, or 0x1000 indicates *something*. This is not + * immediately obvious, since the 2s1p+4s configuration seems + * to offer all functionality on functions 0..2, while still + * advertising the same function 3 as the 4s+2s1p config. + */ + sub_serports = dev->subsystem_device & 0xf; + if (sub_serports > 0) { + return sub_serports; + } else { + printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); + return 0; + } + } + + moan_device("unknown NetMos/Mostech program interface", dev); + return 0; +} static int pci_netmos_init(struct pci_dev *dev) { @@ -761,12 +843,28 @@ static int pci_netmos_init(struct pci_dev *dev) if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || (dev->device == PCI_DEVICE_ID_NETMOS_9865)) return 0; + if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && dev->subsystem_device == 0x0299) return 0; + switch (dev->device) { /* FALLTHROUGH on all */ + case PCI_DEVICE_ID_NETMOS_9904: + case PCI_DEVICE_ID_NETMOS_9912: + case PCI_DEVICE_ID_NETMOS_9922: + case PCI_DEVICE_ID_NETMOS_9900: + num_serial = pci_netmos_9900_numports(dev); + break; + + default: + if (num_serial == 0 ) { + moan_device("unknown NetMos/Mostech device", dev); + } + } + if (num_serial == 0) return -ENODEV; + return num_serial; } @@ -1396,6 +1494,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .device = PCI_DEVICE_ID_TIMEDIA_1889, .subvendor = PCI_VENDOR_ID_TIMEDIA, .subdevice = PCI_ANY_ID, + .probe = pci_timedia_probe, .init = pci_timedia_init, .setup = pci_timedia_setup, }, @@ -1426,7 +1525,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .init = pci_netmos_init, - .setup = pci_default_setup, + .setup = pci_netmos_9900_setup, }, /* * For Oxford Semiconductor Tornado based devices @@ -1703,6 +1802,7 @@ enum pci_board_num_t { pbn_ADDIDATA_PCIe_8_3906250, pbn_ce4100_1_115200, pbn_omegapci, + pbn_NETMOS9900_2s_115200, }; /* @@ -2404,6 +2504,11 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 115200, .uart_offset = 0x200, }, + [pbn_NETMOS9900_2s_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + }, }; static const struct pci_device_id softmodem_blacklist[] = { @@ -2640,11 +2745,19 @@ EXPORT_SYMBOL_GPL(pciserial_resume_ports); static int __devinit pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) { + struct pci_serial_quirk *quirk; struct serial_private *priv; const struct pciserial_board *board; struct pciserial_board tmp; int rc; + quirk = find_quirk(dev); + if (quirk->probe) { + rc = quirk->probe(dev); + if (rc) + return rc; + } + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", ent->driver_data); @@ -2654,6 +2767,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) board = &pci_boards[ent->driver_data]; rc = pci_enable_device(dev); + pci_save_state(dev); if (rc) return rc; @@ -3885,6 +3999,27 @@ static struct pci_device_id serial_pci_tbl[] = { 0xA000, 0x1000, 0, 0, pbn_b0_1_115200 }, + /* the 9901 is a rebranded 9912 */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x3002, + 0, 0, pbn_NETMOS9900_2s_115200 }, + /* * Best Connectivity PCI Multi I/O cards */ @@ -3927,6 +4062,51 @@ static struct pci_device_id serial_pci_tbl[] = { { 0, } }; +static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev, + pci_channel_state_t state) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (priv) + pciserial_suspend_ports(priv); + + pci_disable_device(dev); + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) +{ + int rc; + + rc = pci_enable_device(dev); + + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + pci_restore_state(dev); + pci_save_state(dev); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void serial8250_io_resume(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (priv) + pciserial_resume_ports(priv); +} + +static struct pci_error_handlers serial8250_err_handler = { + .error_detected = serial8250_io_error_detected, + .slot_reset = serial8250_io_slot_reset, + .resume = serial8250_io_resume, +}; + static struct pci_driver serial_pci_driver = { .name = "serial", .probe = pciserial_init_one, @@ -3936,6 +4116,7 @@ static struct pci_driver serial_pci_driver = { .resume = pciserial_resume_one, #endif .id_table = serial_pci_tbl, + .err_handler = &serial8250_err_handler, }; static int __init serial8250_pci_init(void) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 8f41e11..cb40b82 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1404,7 +1404,7 @@ config SERIAL_SC26XX config SERIAL_SC26XX_CONSOLE bool "Console on SC2681/SC2692 serial port" - depends on SERIAL_SC26XX + depends on SERIAL_SC26XX=y select SERIAL_CORE_CONSOLE help Support for Console on SC2681/SC2692 serial ports. diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 4652109..846dfcd 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -14,6 +14,7 @@ *along with this program; if not, write to the Free Software *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. */ +#include <linux/kernel.h> #include <linux/serial_reg.h> #include <linux/slab.h> #include <linux/module.h> @@ -44,6 +45,7 @@ enum { /* Set the max number of UART port * Intel EG20T PCH: 4 port * OKI SEMICONDUCTOR ML7213 IOH: 3 port + * OKI SEMICONDUCTOR ML7223 IOH: 2 port */ #define PCH_UART_NR 4 @@ -137,8 +139,6 @@ enum { #define PCH_UART_DLL 0x00 #define PCH_UART_DLM 0x01 -#define DIV_ROUND(a, b) (((a) + ((b)/2)) / (b)) - #define PCH_UART_IID_RLS (PCH_UART_IIR_REI) #define PCH_UART_IID_RDR (PCH_UART_IIR_RRI) #define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI) @@ -316,7 +316,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, unsigned int dll, dlm, lcr; int div; - div = DIV_ROUND(priv->base_baud / 16, baud); + div = DIV_ROUND_CLOSEST(priv->base_baud / 16, baud); if (div < 0 || USHRT_MAX <= div) { dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div); return -EINVAL; @@ -1429,6 +1429,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, goto init_port_hal_free; } + pci_enable_msi(pdev); + iobase = pci_resource_start(pdev, 0); mapbase = pci_resource_start(pdev, 1); priv->mapbase = mapbase; @@ -1485,6 +1487,8 @@ static void pch_uart_pci_remove(struct pci_dev *pdev) struct eg20t_port *priv; priv = (struct eg20t_port *)pci_get_drvdata(pdev); + + pci_disable_msi(pdev); pch_uart_exit_port(priv); pci_disable_device(pdev); kfree(priv); @@ -1568,6 +1572,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev, return ret; probe_disable_device: + pci_disable_msi(pdev); pci_disable_device(pdev); probe_error: return ret; diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c index 8dd160c..8b0b888 100644 --- a/drivers/tty/serial/s5pv210.c +++ b/drivers/tty/serial/s5pv210.c @@ -18,6 +18,7 @@ #include <linux/init.h> #include <linux/serial_core.h> #include <linux/serial.h> +#include <linux/delay.h> #include <asm/irq.h> #include <mach/hardware.h> @@ -83,6 +84,9 @@ static int s5pv210_serial_resetport(struct uart_port *port, wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); wr_regl(port, S3C2410_UFCON, cfg->ufcon); + /* It is need to delay When reset FIFO register */ + udelay(1); + return 0; } diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 7ead421..afc6294 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1194,12 +1194,10 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev) EXPORT_SYMBOL_GPL(s3c24xx_serial_remove); /* UART power management code */ - -#ifdef CONFIG_PM - -static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int s3c24xx_serial_suspend(struct device *dev) { - struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); + struct uart_port *port = s3c24xx_dev_to_port(dev); if (port) uart_suspend_port(&s3c24xx_uart_drv, port); @@ -1207,9 +1205,9 @@ static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t stat return 0; } -static int s3c24xx_serial_resume(struct platform_device *dev) +static int s3c24xx_serial_resume(struct device *dev) { - struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); + struct uart_port *port = s3c24xx_dev_to_port(dev); struct s3c24xx_uart_port *ourport = to_ourport(port); if (port) { @@ -1222,17 +1220,20 @@ static int s3c24xx_serial_resume(struct platform_device *dev) return 0; } -#endif + +static const struct dev_pm_ops s3c24xx_serial_pm_ops = { + .suspend = s3c24xx_serial_suspend, + .resume = s3c24xx_serial_resume, +}; +#else /* !CONFIG_PM_SLEEP */ +#define s3c24xx_serial_pm_ops NULL +#endif /* CONFIG_PM_SLEEP */ int s3c24xx_serial_init(struct platform_driver *drv, struct s3c24xx_uart_info *info) { dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - -#ifdef CONFIG_PM - drv->suspend = s3c24xx_serial_suspend; - drv->resume = s3c24xx_serial_resume; -#endif + drv->driver.pm = &s3c24xx_serial_pm_ops; return platform_driver_register(drv); } |