diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-10-08 04:34:49 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-10-08 04:34:49 (GMT) |
commit | c913fc4146ba7c280e074558d0a461e5c6f07c8a (patch) | |
tree | b09b2ab5b87f4772d7b30d84e21984b999b37315 /drivers/usb/dwc2 | |
parent | a439f8f2879c68676eb74501ef9a6f187aeeec57 (diff) | |
parent | 8185041f5fa6f02acf75229a590e16aac028fc5e (diff) | |
download | linux-c913fc4146ba7c280e074558d0a461e5c6f07c8a.tar.xz |
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late DT updates from Arnd Bergmann:
"These updates have been kept in a separate branch mostly because they
rely on updates to the respective clk drivers to keep the shared
header files in sync.
- The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
automotive SoC similar to the ⅹ8a7795 chip we already support, but
the dts changes rely on a clock driver change that has been merged
for v4.9 through the clk tree.
- The Amlogic meson-gxbb (S905) platform gains support for a few
drivers merged through our tree, in particular the network and usb
driver changes are required and included here, and also the clk
tree changes.
- The Allwinner platforms have seen a large-scale change to their clk
drivers and the dts file updates must come after that. This
includes the newly added Nextthing GR8 platform, which is derived
from sun5i/A13.
- Some integrator (arm32) changes rely on clk driver changes.
- A single patch for lpc32xx has no such dependency but wasn't added
until just before the merge window"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
ARM: dts: lpc32xx: add device node for IRAM on-chip memory
ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
ARM: dts: sun8i: add pinmux for UART1 at PG
dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
dts: sun8i-h3: add pinmux definitions for I2C0-2
dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
dts: sun8i-h3: add pinmux definitions for UART2-3
ARM: dts: sun9i: a80-optimus: Disable EHCI1
ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
...
Diffstat (limited to 'drivers/usb/dwc2')
-rw-r--r-- | drivers/usb/dwc2/platform.c | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 530959a..8e1728b 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -182,6 +182,38 @@ static const struct dwc2_core_params params_ltq = { .hibernation = -1, }; +static const struct dwc2_core_params params_amlogic = { + .otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE, + .otg_ver = -1, + .dma_enable = 1, + .dma_desc_enable = 0, + .dma_desc_fs_enable = 0, + .speed = DWC2_SPEED_PARAM_HIGH, + .enable_dynamic_fifo = 1, + .en_multiple_tx_fifo = -1, + .host_rx_fifo_size = 512, + .host_nperio_tx_fifo_size = 500, + .host_perio_tx_fifo_size = 500, + .max_transfer_size = -1, + .max_packet_count = -1, + .host_channels = 16, + .phy_type = DWC2_PHY_TYPE_PARAM_UTMI, + .phy_utmi_width = -1, + .phy_ulpi_ddr = -1, + .phy_ulpi_ext_vbus = -1, + .i2c_enable = -1, + .ulpi_fs_ls = -1, + .host_support_fs_ls_low_power = -1, + .host_ls_low_power_phy_clk = -1, + .ts_dline = -1, + .reload_ctl = 1, + .ahbcfg = GAHBCFG_HBSTLEN_INCR8 << + GAHBCFG_HBSTLEN_SHIFT, + .uframe_sched = 0, + .external_id_pin_ctl = -1, + .hibernation = -1, +}; + /* * Check the dr_mode against the module configuration and hardware * capabilities. @@ -486,6 +518,8 @@ static const struct of_device_id dwc2_of_match_table[] = { { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq }, { .compatible = "snps,dwc2", .data = NULL }, { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, + { .compatible = "amlogic,meson8b-usb", .data = ¶ms_amlogic }, + { .compatible = "amlogic,meson-gxbb-usb", .data = ¶ms_amlogic }, {}, }; MODULE_DEVICE_TABLE(of, dwc2_of_match_table); |