Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big set of USB and PHY patches for 3.19-rc1.

  The normal churn in the USB gadget area is in here, as well as xhci
  and other individual USB driver updates.  The PHY tree is also in
  here, as there were dependancies on the USB tree.

  All of these have been in linux-next"

* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
  arm: omap3: twl: remove usb phy init data
  usbip: fix error handling in stub_probe()
  usb: gadget: udc: missing curly braces
  USB: mos7720: delete some unneeded code
  wusb: replace memset by memzero_explicit
  usbip: remove unneeded structure
  usb: xhci: fix comment for PORT_DEV_REMOVE
  xhci: don't use the same variable for stopped and halted rings current TD
  xhci: clear extra bits from slot context when setting max exit latency
  xhci: cleanup finish_td function
  USB: adutux: NULL dereferences on disconnect
  usb: chipidea: fix platform_no_drv_owner.cocci warnings
  usb: chipidea: Fixed a few typos in comments
  Documentation: bindings: add doc for the USB2 ChipIdea USB driver
  usb: chipidea: add a usb2 driver for ci13xxx
  usb: chipidea: fix phy handling
  usb: chipidea: remove duplicate dev_set_drvdata for host_start
  usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
  usb: chipidea: add controller reset API
  usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
  ...

1 files changed, 61 insertions, 28 deletions

diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index 9968f53..eb2999c 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -840,6 +840,31 @@ static void udc_reinit(struct at91_udc *udc)
 	}
 }
 
+static void reset_gadget(struct at91_udc *udc)
+{
+	struct usb_gadget_driver *driver = udc->driver;
+	int i;
+
+	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->suspended = 0;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		struct at91_ep *ep = &udc->ep[i];
+
+		ep->stopped = 1;
+		nuke(ep, -ESHUTDOWN);
+	}
+	if (driver) {
+		spin_unlock(&udc->lock);
+		usb_gadget_udc_reset(&udc->gadget, driver);
+		spin_lock(&udc->lock);
+	}
+
+	udc_reinit(udc);
+}
+
 static void stop_activity(struct at91_udc *udc)
 {
 	struct usb_gadget_driver *driver = udc->driver;
@@ -870,12 +895,10 @@ static void clk_on(struct at91_udc *udc)
 		return;
 	udc->clocked = 1;
 
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(udc->uclk, 48000000);
-		clk_prepare_enable(udc->uclk);
-	}
-	clk_prepare_enable(udc->iclk);
-	clk_prepare_enable(udc->fclk);
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_enable(udc->uclk);
+	clk_enable(udc->iclk);
+	clk_enable(udc->fclk);
 }
 
 static void clk_off(struct at91_udc *udc)
@@ -884,10 +907,10 @@ static void clk_off(struct at91_udc *udc)
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable_unprepare(udc->fclk);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->fclk);
+	clk_disable(udc->iclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable_unprepare(udc->uclk);
+		clk_disable(udc->uclk);
 }
 
 /*
@@ -984,8 +1007,8 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on)
 
 static int at91_start(struct usb_gadget *gadget,
 		struct usb_gadget_driver *driver);
-static int at91_stop(struct usb_gadget *gadget,
-		struct usb_gadget_driver *driver);
+static int at91_stop(struct usb_gadget *gadget);
+
 static const struct usb_gadget_ops at91_udc_ops = {
 	.get_frame		= at91_get_frame,
 	.wakeup			= at91_wakeup,
@@ -1426,7 +1449,7 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES);
 			VDBG("end bus reset\n");
 			udc->addr = 0;
-			stop_activity(udc);
+			reset_gadget(udc);
 
 			/* enable ep0 */
 			at91_udp_write(udc, AT91_UDP_CSR(0),
@@ -1512,20 +1535,11 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 
 /*-------------------------------------------------------------------------*/
 
-static void nop_release(struct device *dev)
-{
-	/* nothing to free */
-}
-
 static struct at91_udc controller = {
 	.gadget = {
 		.ops	= &at91_udc_ops,
 		.ep0	= &controller.ep[0].ep,
 		.name	= driver_name,
-		.dev	= {
-			.init_name = "gadget",
-			.release = nop_release,
-		}
 	},
 	.ep[0] = {
 		.ep = {
@@ -1641,12 +1655,10 @@ static int at91_start(struct usb_gadget *gadget,
 	udc->enabled = 1;
 	udc->selfpowered = 1;
 
-	DBG("bound to %s\n", driver->driver.name);
 	return 0;
 }
 
-static int at91_stop(struct usb_gadget *gadget,
-		struct usb_gadget_driver *driver)
+static int at91_stop(struct usb_gadget *gadget)
 {
 	struct at91_udc *udc;
 	unsigned long	flags;
@@ -1659,7 +1671,6 @@ static int at91_stop(struct usb_gadget *gadget,
 
 	udc->driver = NULL;
 
-	DBG("unbound from %s\n", driver->driver.name);
 	return 0;
 }
 
@@ -1780,14 +1791,24 @@ static int at91udc_probe(struct platform_device *pdev)
 	}
 
 	/* don't do anything until we have both gadget driver and VBUS */
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		clk_set_rate(udc->uclk, 48000000);
+		retval = clk_prepare(udc->uclk);
+		if (retval)
+			goto fail1;
+	}
+	retval = clk_prepare(udc->fclk);
+	if (retval)
+		goto fail1a;
+
 	retval = clk_prepare_enable(udc->iclk);
 	if (retval)
-		goto fail1;
+		goto fail1b;
 	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
 	/* Clear all pending interrupts - UDP may be used by bootloader. */
 	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);
@@ -1795,7 +1816,7 @@ static int at91udc_probe(struct platform_device *pdev)
 			0, driver_name, udc);
 	if (retval < 0) {
 		DBG("request irq %d failed\n", udc->udp_irq);
-		goto fail1;
+		goto fail1c;
 	}
 	if (gpio_is_valid(udc->board.vbus_pin)) {
 		retval = gpio_request(udc->board.vbus_pin, "udc_vbus");
@@ -1848,6 +1869,13 @@ fail3:
 		gpio_free(udc->board.vbus_pin);
 fail2:
 	free_irq(udc->udp_irq, udc);
+fail1c:
+	clk_unprepare(udc->iclk);
+fail1b:
+	clk_unprepare(udc->fclk);
+fail1a:
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
 fail1:
 	if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
 		clk_put(udc->uclk);
@@ -1896,6 +1924,11 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
+	clk_unprepare(udc->fclk);
+	clk_unprepare(udc->iclk);
+
 	clk_put(udc->iclk);
 	clk_put(udc->fclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))