Merge tag 'usb-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.19 merge window

This time, a very pull request with 216 non-merge
commits. Most of the commits contained here are
sparse or coccinelle fixes ranging from missing
'static' to returning 0 in case of errors.

More importantly, we have the removal the now
unnecessary 'driver' argument to ->udc_stop().

DWC2 learned about Dual-Role builds. Users of
this IP can now have a single driver built for
host and device roles.

DWC3 got support for two new HW platforms: Exynos7
and AMD.

The Broadcom USB 3.0 Device Controller IP is now
supported and so is PLX USB338x, which means DWC3
has lost is badge as the only USB 3.0 peripheral
IP supported on Linux.

Thanks for Tony Lindgren's work, we can now have
a distro-like kernel where all MUSB glue layers
can be built into the same kernel (statically
or dynamically linked) and it'll work in PIO (DMA
will come probably on v3.20).

Other than these, the usual set of cleanups and
non-critical fixes.

Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 5 insertions, 20 deletions

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 1529926..b317479 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -987,8 +987,8 @@ usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
 
 static int atmel_usba_start(struct usb_gadget *gadget,
 		struct usb_gadget_driver *driver);
-static int atmel_usba_stop(struct usb_gadget *gadget,
-		struct usb_gadget_driver *driver);
+static int atmel_usba_stop(struct usb_gadget *gadget);
+
 static const struct usb_gadget_ops usba_udc_ops = {
 	.get_frame		= usba_udc_get_frame,
 	.wakeup			= usba_udc_wakeup,
@@ -1007,19 +1007,10 @@ static struct usb_endpoint_descriptor usba_ep0_desc = {
 	.bInterval = 1,
 };
 
-static void nop_release(struct device *dev)
-{
-
-}
-
 static struct usb_gadget usba_gadget_template = {
 	.ops		= &usba_udc_ops,
 	.max_speed	= USB_SPEED_HIGH,
 	.name		= "atmel_usba_udc",
-	.dev	= {
-		.init_name	= "gadget",
-		.release	= nop_release,
-	},
 };
 
 /*
@@ -1685,11 +1676,10 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 		usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
 		reset_all_endpoints(udc);
 
-		if (udc->gadget.speed != USB_SPEED_UNKNOWN
-				&& udc->driver && udc->driver->disconnect) {
+		if (udc->gadget.speed != USB_SPEED_UNKNOWN && udc->driver) {
 			udc->gadget.speed = USB_SPEED_UNKNOWN;
 			spin_unlock(&udc->lock);
-			udc->driver->disconnect(&udc->gadget);
+			usb_gadget_udc_reset(&udc->gadget, udc->driver);
 			spin_lock(&udc->lock);
 		}
 
@@ -1791,8 +1781,6 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 		return ret;
 	}
 
-	DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
-
 	udc->vbus_prev = 0;
 	if (gpio_is_valid(udc->vbus_pin))
 		enable_irq(gpio_to_irq(udc->vbus_pin));
@@ -1809,8 +1797,7 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 	return 0;
 }
 
-static int atmel_usba_stop(struct usb_gadget *gadget,
-		struct usb_gadget_driver *driver)
+static int atmel_usba_stop(struct usb_gadget *gadget)
 {
 	struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
 	unsigned long flags;
@@ -1830,8 +1817,6 @@ static int atmel_usba_stop(struct usb_gadget *gadget,
 	clk_disable_unprepare(udc->hclk);
 	clk_disable_unprepare(udc->pclk);
 
-	DBG(DBG_GADGET, "unregistered driver `%s'\n", udc->driver->driver.name);
-
 	udc->driver = NULL;
 
 	return 0;