Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big set of USB and PHY patches for 3.19-rc1.

  The normal churn in the USB gadget area is in here, as well as xhci
  and other individual USB driver updates.  The PHY tree is also in
  here, as there were dependancies on the USB tree.

  All of these have been in linux-next"

* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
  arm: omap3: twl: remove usb phy init data
  usbip: fix error handling in stub_probe()
  usb: gadget: udc: missing curly braces
  USB: mos7720: delete some unneeded code
  wusb: replace memset by memzero_explicit
  usbip: remove unneeded structure
  usb: xhci: fix comment for PORT_DEV_REMOVE
  xhci: don't use the same variable for stopped and halted rings current TD
  xhci: clear extra bits from slot context when setting max exit latency
  xhci: cleanup finish_td function
  USB: adutux: NULL dereferences on disconnect
  usb: chipidea: fix platform_no_drv_owner.cocci warnings
  usb: chipidea: Fixed a few typos in comments
  Documentation: bindings: add doc for the USB2 ChipIdea USB driver
  usb: chipidea: add a usb2 driver for ci13xxx
  usb: chipidea: fix phy handling
  usb: chipidea: remove duplicate dev_set_drvdata for host_start
  usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
  usb: chipidea: add controller reset API
  usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
  ...

1 files changed, 490 insertions, 0 deletions

diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h
new file mode 100644
index 0000000..dc18a20
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc.h
@@ -0,0 +1,490 @@
+/*
+ * bdc.h - header for the BRCM BDC USB3.0 device controller
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef	__LINUX_BDC_H__
+#define	__LINUX_BDC_H__
+
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/debugfs.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <asm/unaligned.h>
+
+#define BRCM_BDC_NAME "bdc_usb3"
+#define BRCM_BDC_DESC "BDC device controller driver"
+
+#define DMA_ADDR_INVALID        (~(dma_addr_t)0)
+
+/* BDC command operation timeout in usec*/
+#define BDC_CMD_TIMEOUT	1000
+/* BDC controller operation timeout in usec*/
+#define BDC_COP_TIMEOUT	500
+
+/*
+ * Maximum size of ep0 response buffer for ch9 requests,
+ * the set_sel request uses 6 so far, the max.
+*/
+#define EP0_RESPONSE_BUFF  6
+/* Start with SS as default */
+#define EP0_MAX_PKT_SIZE 512
+
+/* 64 entries in a SRR */
+#define NUM_SR_ENTRIES	64
+
+/* Num of bds per table */
+#define NUM_BDS_PER_TABLE	32
+
+/* Num of tables in bd list for control,bulk and Int ep */
+#define NUM_TABLES	2
+
+/* Num of tables in bd list for Isoch ep */
+#define NUM_TABLES_ISOCH	6
+
+/* U1 Timeout default: 248usec */
+#define U1_TIMEOUT	0xf8
+
+/* Interrupt coalescence in usec */
+#define	INT_CLS	500
+
+/* Register offsets */
+/* Configuration and Capability registers */
+#define BDC_BDCCFG0	0x00
+#define BDC_BDCCFG1	0x04
+#define BDC_BDCCAP0	0x08
+#define BDC_BDCCAP1	0x0c
+#define BDC_CMDPAR0	0x10
+#define BDC_CMDPAR1	0x14
+#define BDC_CMDPAR2	0x18
+#define BDC_CMDSC	0x1c
+#define BDC_USPC	0x20
+#define BDC_USPPMS	0x28
+#define BDC_USPPM2	0x2c
+#define BDC_SPBBAL	0x38
+#define BDC_SPBBAH	0x3c
+#define BDC_BDCSC	0x40
+#define BDC_XSFNTF	0x4c
+
+#define BDC_DVCSA	0x50
+#define BDC_DVCSB	0x54
+#define BDC_EPSTS0(n)	(0x60 + (n * 0x10))
+#define BDC_EPSTS1(n)	(0x64 + (n * 0x10))
+#define BDC_EPSTS2(n)	(0x68 + (n * 0x10))
+#define BDC_EPSTS3(n)	(0x6c + (n * 0x10))
+#define BDC_EPSTS4(n)	(0x70 + (n * 0x10))
+#define BDC_EPSTS5(n)	(0x74 + (n * 0x10))
+#define BDC_EPSTS6(n)	(0x78 + (n * 0x10))
+#define BDC_EPSTS7(n)	(0x7c + (n * 0x10))
+#define BDC_SRRBAL(n)	(0x200 + (n * 0x10))
+#define BDC_SRRBAH(n)	(0x204 + (n * 0x10))
+#define BDC_SRRINT(n)	(0x208 + (n * 0x10))
+#define BDC_INTCTLS(n)	(0x20c + (n * 0x10))
+
+/* Extended capability regs */
+#define BDC_FSCNOC	0xcd4
+#define BDC_FSCNIC	0xce4
+#define NUM_NCS(p)	(p >> 28)
+
+/* Register bit fields and Masks */
+/* BDC Configuration 0 */
+#define BDC_PGS(p)	(((p) & (0x7 << 8)) >> 8)
+#define BDC_SPB(p)	(p & 0x7)
+
+/* BDC Capability1 */
+#define BDC_P64		(1 << 0)
+
+/* BDC Command register */
+#define BDC_CMD_FH	0xe
+#define BDC_CMD_DNC	0x6
+#define BDC_CMD_EPO	0x4
+#define BDC_CMD_BLA	0x3
+#define BDC_CMD_EPC	0x2
+#define BDC_CMD_DVC	0x1
+#define BDC_CMD_CWS		(0x1 << 5)
+#define BDC_CMD_CST(p)		(((p) & (0xf << 6))>>6)
+#define BDC_CMD_EPN(p)		((p & 0x1f) << 10)
+#define BDC_SUB_CMD_ADD		(0x1 << 17)
+#define BDC_SUB_CMD_FWK		(0x4 << 17)
+/* Reset sequence number */
+#define BDC_CMD_EPO_RST_SN	(0x1 << 16)
+#define BDC_CMD_EP0_XSD		(0x1 << 16)
+#define BDC_SUB_CMD_ADD_EP	(0x1 << 17)
+#define BDC_SUB_CMD_DRP_EP	(0x2 << 17)
+#define BDC_SUB_CMD_EP_STP	(0x2 << 17)
+#define BDC_SUB_CMD_EP_STL	(0x4 << 17)
+#define BDC_SUB_CMD_EP_RST	(0x1 << 17)
+#define BDC_CMD_SRD		(1 << 27)
+
+/* CMD completion status */
+#define BDC_CMDS_SUCC	0x1
+#define BDC_CMDS_PARA	0x3
+#define BDC_CMDS_STAT	0x4
+#define BDC_CMDS_FAIL	0x5
+#define BDC_CMDS_INTL	0x6
+#define BDC_CMDS_BUSY	0xf
+
+/* CMDSC Param 2 shifts */
+#define EPT_SHIFT	22
+#define MP_SHIFT	10
+#define MB_SHIFT	6
+#define EPM_SHIFT	4
+
+/* BDC USPSC */
+#define BDC_VBC		(1 << 31)
+#define BDC_PRC		(1 << 30)
+#define BDC_PCE		(1 << 29)
+#define BDC_CFC		(1 << 28)
+#define BDC_PCC		(1 << 27)
+#define BDC_PSC		(1 << 26)
+#define BDC_VBS		(1 << 25)
+#define BDC_PRS		(1 << 24)
+#define BDC_PCS		(1 << 23)
+#define BDC_PSP(p)	(((p) & (0x7 << 20))>>20)
+#define BDC_SCN		(1 << 8)
+#define BDC_SDC		(1 << 7)
+#define BDC_SWS		(1 << 4)
+
+#define BDC_USPSC_RW	(BDC_SCN|BDC_SDC|BDC_SWS|0xf)
+#define BDC_PSP(p)	(((p) & (0x7 << 20))>>20)
+
+#define BDC_SPEED_FS	0x1
+#define BDC_SPEED_LS	0x2
+#define BDC_SPEED_HS	0x3
+#define BDC_SPEED_SS	0x4
+
+#define BDC_PST(p)	(p & 0xf)
+#define BDC_PST_MASK	0xf
+
+/* USPPMS */
+#define BDC_U2E		(0x1 << 31)
+#define BDC_U1E		(0x1 << 30)
+#define BDC_U2A		(0x1 << 29)
+#define BDC_PORT_W1S	(0x1 << 17)
+#define BDC_U1T(p)	((p) & 0xff)
+#define BDC_U2T(p)	(((p) & 0xff) << 8)
+#define BDC_U1T_MASK	0xff
+
+/* USBPM2 */
+/* Hardware LPM Enable */
+#define BDC_HLE		(1 << 16)
+
+/* BDC Status and Control */
+#define BDC_COP_RST	(1 << 29)
+#define BDC_COP_RUN	(2 << 29)
+#define BDC_COP_STP	(4 << 29)
+
+#define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP)
+
+#define BDC_COS		(1 << 28)
+#define BDC_CSTS(p)	(((p) & (0x7 << 20)) >> 20)
+#define BDC_MASK_MCW	(1 << 7)
+#define BDC_GIE		(1 << 1)
+#define BDC_GIP		(1 << 0)
+
+#define BDC_HLT	1
+#define BDC_NOR	2
+#define BDC_OIP	7
+
+/* Buffer descriptor and Status report bit fields and masks */
+#define BD_TYPE_BITMASK	(0xf)
+#define BD_CHAIN	0xf
+
+#define BD_TFS_SHIFT	4
+#define BD_SOT		(1 << 26)
+#define BD_EOT		(1 << 27)
+#define BD_ISP		(1 << 29)
+#define BD_IOC		(1 << 30)
+#define BD_SBF		(1 << 31)
+
+#define BD_INTR_TARGET(p)	(((p) & 0x1f) << 27)
+
+#define BDC_SRR_RWS		(1 << 4)
+#define BDC_SRR_RST		(1 << 3)
+#define BDC_SRR_ISR		(1 << 2)
+#define BDC_SRR_IE		(1 << 1)
+#define BDC_SRR_IP		(1 << 0)
+#define BDC_SRR_EPI(p)	(((p) & (0xff << 24)) >> 24)
+#define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16)
+#define BDC_SRR_DPI_MASK	0x00ff0000
+
+#define MARK_CHAIN_BD	(BD_CHAIN|BD_EOT|BD_SOT)
+
+/* Control transfer BD specific fields */
+#define BD_DIR_IN		(1 << 25)
+
+#define BDC_PTC_MASK	0xf0000000
+
+/* status report defines */
+#define SR_XSF		0
+#define SR_USPC		4
+#define SR_BD_LEN(p)    (p & 0xffffff)
+
+#define XSF_SUCC	0x1
+#define XSF_SHORT	0x3
+#define XSF_BABB	0x4
+#define XSF_SETUP_RECV	0x6
+#define XSF_DATA_START	0x7
+#define XSF_STATUS_START 0x8
+
+#define XSF_STS(p) (((p) >> 28) & 0xf)
+
+/* Transfer BD fields */
+#define BD_LEN(p) ((p) & 0x1ffff)
+#define BD_LTF		(1 << 25)
+#define BD_TYPE_DS	0x1
+#define BD_TYPE_SS	0x2
+
+#define BDC_EP_ENABLED     (1 << 0)
+#define BDC_EP_STALL       (1 << 1)
+#define BDC_EP_STOP        (1 << 2)
+
+/* One BD can transfer max 65536 bytes */
+#define BD_MAX_BUFF_SIZE	(1 << 16)
+/* Maximum bytes in one XFR, Refer to BDC spec */
+#define MAX_XFR_LEN		16777215
+
+/* defines for Force Header command */
+#define DEV_NOTF_TYPE 6
+#define FWK_SUBTYPE  1
+#define TRA_PACKET   4
+
+#define to_bdc_ep(e)		container_of(e, struct bdc_ep, usb_ep)
+#define to_bdc_req(r)		container_of(r, struct bdc_req, usb_req)
+#define gadget_to_bdc(g)	container_of(g, struct bdc, gadget)
+
+/* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */
+#define BDC_TNOTIFY 2500 /*in ms*/
+/* Devstatus bitfields */
+#define REMOTE_WAKEUP_ISSUED	(1 << 16)
+#define DEVICE_SUSPENDED	(1 << 17)
+#define FUNC_WAKE_ISSUED	(1 << 18)
+#define REMOTE_WAKE_ENABLE	(1 << USB_DEVICE_REMOTE_WAKEUP)
+
+/* On disconnect, preserve these bits and clear rest */
+#define DEVSTATUS_CLEAR		(1 << USB_DEVICE_SELF_POWERED)
+/* Hardware and software Data structures */
+
+/* Endpoint bd: buffer descriptor */
+struct bdc_bd {
+	__le32 offset[4];
+};
+
+/* Status report in Status report ring(srr) */
+struct bdc_sr {
+	__le32 offset[4];
+};
+
+/* bd_table: contigous bd's in a table */
+struct bd_table {
+	struct bdc_bd *start_bd;
+	/* dma address of start bd of table*/
+	dma_addr_t dma;
+};
+
+/*
+ * Each endpoint has a bdl(buffer descriptor list), bdl consists of 1 or more bd
+ * table's chained to each other through a chain bd, every table has equal
+ * number of bds. the software uses bdi(bd index) to refer to particular bd in
+ * the list.
+ */
+struct bd_list {
+	/* Array of bd table pointers*/
+	struct bd_table **bd_table_array;
+	/* How many tables chained to each other */
+	int num_tabs;
+	/* Max_bdi = num_tabs * num_bds_table - 1 */
+	int max_bdi;
+	/* current enq bdi from sw point of view */
+	int eqp_bdi;
+	/* current deq bdi from sw point of view */
+	int hwd_bdi;
+	/* numbers of bds per table */
+	int num_bds_table;
+};
+
+struct bdc_req;
+
+/* Representation of a transfer, one transfer can have multiple bd's */
+struct bd_transfer {
+	struct bdc_req *req;
+	/* start bd index */
+	int start_bdi;
+	/* this will be the next hw dqp when this transfer completes */
+	int next_hwd_bdi;
+	/* number of bds in this transfer */
+	int num_bds;
+};
+
+/*
+ * Representation of a gadget request, every gadget request is contained
+ * by 1 bd_transfer.
+ */
+struct bdc_req {
+	struct usb_request	usb_req;
+	struct list_head	queue;
+	struct bdc_ep		*ep;
+	/* only one Transfer per request */
+	struct bd_transfer bd_xfr;
+	int	epnum;
+};
+
+/* scratchpad buffer needed by bdc hardware */
+struct bdc_scratchpad {
+	dma_addr_t sp_dma;
+	void *buff;
+	u32 size;
+};
+
+/* endpoint representation */
+struct bdc_ep {
+	struct usb_ep	usb_ep;
+	struct list_head queue;
+	struct bdc *bdc;
+	u8  ep_type;
+	u8  dir;
+	u8  ep_num;
+	const struct usb_ss_ep_comp_descriptor	*comp_desc;
+	const struct usb_endpoint_descriptor	*desc;
+	unsigned int flags;
+	char name[20];
+	/* endpoint bd list*/
+	struct bd_list bd_list;
+	/*
+	 * HW generates extra event for multi bd tranfers, this flag helps in
+	 * ignoring the extra event
+	 */
+	bool ignore_next_sr;
+};
+
+/* bdc cmmand parameter structure */
+struct bdc_cmd_params {
+	u32	param2;
+	u32	param1;
+	u32	param0;
+};
+
+/* status report ring(srr), currently one srr is supported for entire system */
+struct srr {
+	struct bdc_sr *sr_bds;
+	u16	eqp_index;
+	u16	dqp_index;
+	dma_addr_t	dma_addr;
+};
+
+/* EP0 states */
+enum bdc_ep0_state {
+	WAIT_FOR_SETUP = 0,
+	WAIT_FOR_DATA_START,
+	WAIT_FOR_DATA_XMIT,
+	WAIT_FOR_STATUS_START,
+	WAIT_FOR_STATUS_XMIT,
+	STATUS_PENDING
+};
+
+/* Link states */
+enum bdc_link_state {
+	BDC_LINK_STATE_U0	= 0x00,
+	BDC_LINK_STATE_U3	= 0x03,
+	BDC_LINK_STATE_RX_DET	= 0x05,
+	BDC_LINK_STATE_RESUME	= 0x0f
+};
+
+/* representation of bdc */
+struct bdc {
+	struct usb_gadget	gadget;
+	struct usb_gadget_driver	*gadget_driver;
+	struct device	*dev;
+	/* device lock */
+	spinlock_t	lock;
+
+	/* num of endpoints for a particular instantiation of IP */
+	unsigned int num_eps;
+	/*
+	 * Array of ep's, it uses the same index covention as bdc hw i.e.
+	 * 1 for ep0, 2 for 1out,3 for 1in ....
+	 */
+	struct bdc_ep		**bdc_ep_array;
+	void __iomem		*regs;
+	struct bdc_scratchpad	scratchpad;
+	u32	sp_buff_size;
+	/* current driver supports 1 status ring */
+	struct srr	srr;
+	/* Last received setup packet */
+	struct	usb_ctrlrequest setup_pkt;
+	struct	bdc_req ep0_req;
+	struct	bdc_req status_req;
+	enum	bdc_ep0_state ep0_state;
+	bool	delayed_status;
+	bool	zlp_needed;
+	bool	reinit;
+	bool	pullup;
+	/* Bits 0-15 are standard and 16-31 for proprietary information */
+	u32	devstatus;
+	int	irq;
+	void	*mem;
+	u32	dev_addr;
+	/* DMA pools */
+	struct dma_pool	*bd_table_pool;
+	u8		test_mode;
+	/* array of callbacks for various status report handlers */
+	void (*sr_handler[2])(struct bdc *, struct bdc_sr *);
+	/* ep0 callback handlers */
+	void (*sr_xsf_ep0[3])(struct bdc *, struct bdc_sr *);
+	/* ep0 response buffer for ch9 requests like GET_STATUS and SET_SEL */
+	unsigned char		ep0_response_buff[EP0_RESPONSE_BUFF];
+	/*
+	 * Timer to check if host resumed transfer after bdc sent Func wake
+	 * notification  packet after a remote wakeup. if not, then resend the
+	 * Func Wake packet every 2.5 secs. Refer to USB3 spec section 8.5.6.4
+	 */
+	struct delayed_work	func_wake_notify;
+};
+
+static inline u32 bdc_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void bdc_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+/* Buffer descriptor list operations */
+void bdc_notify_xfr(struct bdc *, u32);
+void bdc_softconn(struct bdc *);
+void bdc_softdisconn(struct bdc *);
+int bdc_run(struct bdc *);
+int bdc_stop(struct bdc *);
+int bdc_reset(struct bdc *);
+int bdc_udc_init(struct bdc *);
+void bdc_udc_exit(struct bdc *);
+int bdc_reinit(struct bdc *);
+
+/* Status report handlers */
+/* Upstream port status change sr */
+void bdc_sr_uspc(struct bdc *, struct bdc_sr *);
+/* transfer sr */
+void bdc_sr_xsf(struct bdc *, struct bdc_sr *);
+/* EP0 XSF handlers */
+void bdc_xsf_ep0_setup_recv(struct bdc *, struct bdc_sr *);
+void bdc_xsf_ep0_data_start(struct bdc *, struct bdc_sr *);
+void bdc_xsf_ep0_status_start(struct bdc *, struct bdc_sr *);
+
+#endif /* __LINUX_BDC_H__ */