summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-07-26 17:23:47 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2012-07-26 17:23:47 (GMT)
commit9fc377799bc9bfd8d5cb35d0d1ea2e2458cbdbb3 (patch)
treefe93603b4e33dd50ff5f95ff769a0748b230cdf9 /drivers/usb/gadget
parent5e23ae49960d05f578a73ecd19749c45af682c2b (diff)
parente387ef5c47ddeaeaa3cbdc54424cdb7a28dae2c0 (diff)
downloadlinux-9fc377799bc9bfd8d5cb35d0d1ea2e2458cbdbb3.tar.xz
Merge tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB patches from Greg Kroah-Hartman: "Here's the big USB patch set for the 3.6-rc1 merge window. Lots of little changes in here, primarily for gadget controllers and drivers. There's some scsi changes that I think also went in through the scsi tree, but they merge just fine. All of these patches have been in the linux-next tree for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up trivial conflicts in include/scsi/scsi_device.h (same libata conflict that Jeff had already encountered) * tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams usb: Add quirk detection based on interface information usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer USB: add USB_VENDOR_AND_INTERFACE_INFO() macro USB: notify phy when root hub port connect change USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds USB: option: add ZTE MF821D USB: sierra: QMI mode MC7710 moved to qcserial USB: qcserial: adding Sierra Wireless devices USB: qcserial: support generic Qualcomm serial ports USB: qcserial: make probe more flexible USB: qcserial: centralize probe exit path USB: qcserial: consolidate usb_set_interface calls USB: ehci-s5p: Add support for device tree USB: ohci-exynos: Add support for device tree USB: ehci-omap: fix compile failure(v1) usb: host: tegra: pass correct pointer in ehci_setup() USB: ehci-fsl: Update ifdef check to work on 64-bit ppc USB: serial: keyspan: Removed unrequired parentheses. ...
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r--drivers/usb/gadget/Kconfig9
-rw-r--r--drivers/usb/gadget/Makefile1
-rw-r--r--drivers/usb/gadget/acm_ms.c1
-rw-r--r--drivers/usb/gadget/at91_udc.c1
-rw-r--r--drivers/usb/gadget/composite.c7
-rw-r--r--drivers/usb/gadget/f_fs.c7
-rw-r--r--drivers/usb/gadget/f_hid.c208
-rw-r--r--drivers/usb/gadget/f_mass_storage.c133
-rw-r--r--drivers/usb/gadget/f_uvc.c287
-rw-r--r--drivers/usb/gadget/f_uvc.h8
-rw-r--r--drivers/usb/gadget/fsl_mxc_udc.c74
-rw-r--r--drivers/usb/gadget/fsl_udc_core.c18
-rw-r--r--drivers/usb/gadget/imx_udc.c6
-rw-r--r--drivers/usb/gadget/lpc32xx_udc.c85
-rw-r--r--drivers/usb/gadget/mv_u3d.h320
-rw-r--r--drivers/usb/gadget/mv_u3d_core.c2098
-rw-r--r--drivers/usb/gadget/mv_udc_core.c15
-rw-r--r--drivers/usb/gadget/omap_udc.c434
-rw-r--r--drivers/usb/gadget/pch_udc.c2
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c17
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c15
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c215
-rw-r--r--drivers/usb/gadget/s3c-hsudc.c13
-rw-r--r--drivers/usb/gadget/storage_common.c63
-rw-r--r--drivers/usb/gadget/u_ether.c12
-rw-r--r--drivers/usb/gadget/uvc.h4
-rw-r--r--drivers/usb/gadget/webcam.c29
27 files changed, 3340 insertions, 742 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 271ca16..51ab5fd 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -321,6 +321,15 @@ config USB_MV_UDC
USB2.0 OTG controller, which can be configured as high speed or
full speed USB peripheral.
+config USB_MV_U3D
+ tristate "MARVELL PXA2128 USB 3.0 controller"
+ depends on CPU_MMP3
+ select USB_GADGET_DUALSPEED
+ select USB_GADGET_SUPERSPEED
+ help
+ MARVELL PXA2128 Processor series include a super speed USB3.0 device
+ controller, which support super speed USB peripheral.
+
#
# Controllers available in both integrated and discrete versions
#
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 1811513..3fd8cd0 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_USB_EG20T) += pch_udc.o
obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
mv_udc-y := mv_udc_core.o
obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
+obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
#
# USB gadget drivers
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index fdb7aec..75b8a69 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -235,6 +235,7 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
static struct usb_composite_driver acm_ms_driver = {
.name = "g_acm_ms",
.dev = &device_desc,
+ .max_speed = USB_SPEED_SUPER,
.strings = dev_strings,
.unbind = __exit_p(acm_ms_unbind),
};
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 1a4430f..c9e66df 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1634,6 +1634,7 @@ static int at91_start(struct usb_gadget *gadget,
udc = container_of(gadget, struct at91_udc, gadget);
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
+ udc->gadget.dev.of_node = udc->pdev->dev.of_node;
dev_set_drvdata(&udc->gadget.dev, &driver->driver);
udc->enabled = 1;
udc->selfpowered = 1;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 390749b..3f72110 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -117,6 +117,7 @@ int config_ep_by_speed(struct usb_gadget *g,
struct usb_function *f,
struct usb_ep *_ep)
{
+ struct usb_composite_dev *cdev = get_gadget_data(g);
struct usb_endpoint_descriptor *chosen_desc = NULL;
struct usb_descriptor_header **speed_desc = NULL;
@@ -180,10 +181,12 @@ ep_found:
_ep->mult = comp_desc->bmAttributes & 0x3;
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
- _ep->maxburst = comp_desc->bMaxBurst;
+ _ep->maxburst = comp_desc->bMaxBurst + 1;
break;
default:
- /* Do nothing for control endpoints */
+ if (comp_desc->bMaxBurst != 0)
+ ERROR(cdev, "ep0 bMaxBurst must be 0\n");
+ _ep->maxburst = 1;
break;
}
}
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index dcd1c7f..8adc79d 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -21,6 +21,7 @@
#include <linux/blkdev.h>
#include <linux/pagemap.h>
#include <linux/export.h>
+#include <linux/hid.h>
#include <asm/unaligned.h>
#include <linux/usb/composite.h>
@@ -1671,6 +1672,12 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
}
break;
+ case HID_DT_HID:
+ pr_vdebug("hid descriptor\n");
+ if (length != sizeof(struct hid_descriptor))
+ goto inv_length;
+ break;
+
case USB_DT_OTG:
if (length != sizeof(struct usb_otg_descriptor))
goto inv_length;
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 3b3932c..16a8b1c 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -26,6 +26,12 @@ static struct class *hidg_class;
/*-------------------------------------------------------------------------*/
/* HID gadget struct */
+struct f_hidg_req_list {
+ struct usb_request *req;
+ unsigned int pos;
+ struct list_head list;
+};
+
struct f_hidg {
/* configuration */
unsigned char bInterfaceSubClass;
@@ -35,10 +41,10 @@ struct f_hidg {
unsigned short report_length;
/* recv report */
- char *set_report_buff;
- unsigned short set_report_length;
+ struct list_head completed_out_req;
spinlock_t spinlock;
wait_queue_head_t read_queue;
+ unsigned int qlen;
/* send report */
struct mutex lock;
@@ -49,7 +55,9 @@ struct f_hidg {
int minor;
struct cdev cdev;
struct usb_function func;
+
struct usb_ep *in_ep;
+ struct usb_ep *out_ep;
};
static inline struct f_hidg *func_to_hidg(struct usb_function *f)
@@ -65,7 +73,7 @@ static struct usb_interface_descriptor hidg_interface_desc = {
.bDescriptorType = USB_DT_INTERFACE,
/* .bInterfaceNumber = DYNAMIC */
.bAlternateSetting = 0,
- .bNumEndpoints = 1,
+ .bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_HID,
/* .bInterfaceSubClass = DYNAMIC */
/* .bInterfaceProtocol = DYNAMIC */
@@ -96,10 +104,23 @@ static struct usb_endpoint_descriptor hidg_hs_in_ep_desc = {
*/
};
+static struct usb_endpoint_descriptor hidg_hs_out_ep_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ /*.wMaxPacketSize = DYNAMIC */
+ .bInterval = 4, /* FIXME: Add this field in the
+ * HID gadget configuration?
+ * (struct hidg_func_descriptor)
+ */
+};
+
static struct usb_descriptor_header *hidg_hs_descriptors[] = {
(struct usb_descriptor_header *)&hidg_interface_desc,
(struct usb_descriptor_header *)&hidg_desc,
(struct usb_descriptor_header *)&hidg_hs_in_ep_desc,
+ (struct usb_descriptor_header *)&hidg_hs_out_ep_desc,
NULL,
};
@@ -117,10 +138,23 @@ static struct usb_endpoint_descriptor hidg_fs_in_ep_desc = {
*/
};
+static struct usb_endpoint_descriptor hidg_fs_out_ep_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ /*.wMaxPacketSize = DYNAMIC */
+ .bInterval = 10, /* FIXME: Add this field in the
+ * HID gadget configuration?
+ * (struct hidg_func_descriptor)
+ */
+};
+
static struct usb_descriptor_header *hidg_fs_descriptors[] = {
(struct usb_descriptor_header *)&hidg_interface_desc,
(struct usb_descriptor_header *)&hidg_desc,
(struct usb_descriptor_header *)&hidg_fs_in_ep_desc,
+ (struct usb_descriptor_header *)&hidg_fs_out_ep_desc,
NULL,
};
@@ -130,9 +164,11 @@ static struct usb_descriptor_header *hidg_fs_descriptors[] = {
static ssize_t f_hidg_read(struct file *file, char __user *buffer,
size_t count, loff_t *ptr)
{
- struct f_hidg *hidg = file->private_data;
- char *tmp_buff = NULL;
- unsigned long flags;
+ struct f_hidg *hidg = file->private_data;
+ struct f_hidg_req_list *list;
+ struct usb_request *req;
+ unsigned long flags;
+ int ret;
if (!count)
return 0;
@@ -142,8 +178,9 @@ static ssize_t f_hidg_read(struct file *file, char __user *buffer,
spin_lock_irqsave(&hidg->spinlock, flags);
-#define READ_COND (hidg->set_report_buff != NULL)
+#define READ_COND (!list_empty(&hidg->completed_out_req))
+ /* wait for at least one buffer to complete */
while (!READ_COND) {
spin_unlock_irqrestore(&hidg->spinlock, flags);
if (file->f_flags & O_NONBLOCK)
@@ -155,19 +192,34 @@ static ssize_t f_hidg_read(struct file *file, char __user *buffer,
spin_lock_irqsave(&hidg->spinlock, flags);
}
-
- count = min_t(unsigned, count, hidg->set_report_length);
- tmp_buff = hidg->set_report_buff;
- hidg->set_report_buff = NULL;
-
+ /* pick the first one */
+ list = list_first_entry(&hidg->completed_out_req,
+ struct f_hidg_req_list, list);
+ req = list->req;
+ count = min_t(unsigned int, count, req->actual - list->pos);
spin_unlock_irqrestore(&hidg->spinlock, flags);
- if (tmp_buff != NULL) {
- /* copy to user outside spinlock */
- count -= copy_to_user(buffer, tmp_buff, count);
- kfree(tmp_buff);
- } else
- count = -ENOMEM;
+ /* copy to user outside spinlock */
+ count -= copy_to_user(buffer, req->buf + list->pos, count);
+ list->pos += count;
+
+ /*
+ * if this request is completely handled and transfered to
+ * userspace, remove its entry from the list and requeue it
+ * again. Otherwise, we will revisit it again upon the next
+ * call, taking into account its current read position.
+ */
+ if (list->pos == req->actual) {
+ spin_lock_irqsave(&hidg->spinlock, flags);
+ list_del(&list->list);
+ kfree(list);
+ spin_unlock_irqrestore(&hidg->spinlock, flags);
+
+ req->length = hidg->report_length;
+ ret = usb_ep_queue(hidg->out_ep, req, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
+ }
return count;
}
@@ -282,28 +334,37 @@ static int f_hidg_open(struct inode *inode, struct file *fd)
/*-------------------------------------------------------------------------*/
/* usb_function */
-static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req)
+static struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep, unsigned length)
{
- struct f_hidg *hidg = (struct f_hidg *)req->context;
-
- if (req->status != 0 || req->buf == NULL || req->actual == 0) {
- ERROR(hidg->func.config->cdev, "%s FAILED\n", __func__);
- return;
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+ if (req) {
+ req->length = length;
+ req->buf = kmalloc(length, GFP_ATOMIC);
+ if (!req->buf) {
+ usb_ep_free_request(ep, req);
+ req = NULL;
+ }
}
+ return req;
+}
- spin_lock(&hidg->spinlock);
-
- hidg->set_report_buff = krealloc(hidg->set_report_buff,
- req->actual, GFP_ATOMIC);
+static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_hidg *hidg = (struct f_hidg *) req->context;
+ struct f_hidg_req_list *req_list;
+ unsigned long flags;
- if (hidg->set_report_buff == NULL) {
- spin_unlock(&hidg->spinlock);
+ req_list = kzalloc(sizeof(*req_list), GFP_ATOMIC);
+ if (!req_list)
return;
- }
- hidg->set_report_length = req->actual;
- memcpy(hidg->set_report_buff, req->buf, req->actual);
- spin_unlock(&hidg->spinlock);
+ req_list->req = req;
+
+ spin_lock_irqsave(&hidg->spinlock, flags);
+ list_add_tail(&req_list->list, &hidg->completed_out_req);
+ spin_unlock_irqrestore(&hidg->spinlock, flags);
wake_up(&hidg->read_queue);
}
@@ -344,9 +405,7 @@ static int hidg_setup(struct usb_function *f,
case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
| HID_REQ_SET_REPORT):
VDBG(cdev, "set_report | wLenght=%d\n", ctrl->wLength);
- req->context = hidg;
- req->complete = hidg_set_report_complete;
- goto respond;
+ goto stall;
break;
case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
@@ -403,16 +462,25 @@ respond:
static void hidg_disable(struct usb_function *f)
{
struct f_hidg *hidg = func_to_hidg(f);
+ struct f_hidg_req_list *list, *next;
usb_ep_disable(hidg->in_ep);
hidg->in_ep->driver_data = NULL;
+
+ usb_ep_disable(hidg->out_ep);
+ hidg->out_ep->driver_data = NULL;
+
+ list_for_each_entry_safe(list, next, &hidg->completed_out_req, list) {
+ list_del(&list->list);
+ kfree(list);
+ }
}
static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
struct usb_composite_dev *cdev = f->config->cdev;
struct f_hidg *hidg = func_to_hidg(f);
- int status = 0;
+ int i, status = 0;
VDBG(cdev, "hidg_set_alt intf:%d alt:%d\n", intf, alt);
@@ -429,11 +497,55 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
}
status = usb_ep_enable(hidg->in_ep);
if (status < 0) {
- ERROR(cdev, "Enable endpoint FAILED!\n");
+ ERROR(cdev, "Enable IN endpoint FAILED!\n");
goto fail;
}
hidg->in_ep->driver_data = hidg;
}
+
+
+ if (hidg->out_ep != NULL) {
+ /* restart endpoint */
+ if (hidg->out_ep->driver_data != NULL)
+ usb_ep_disable(hidg->out_ep);
+
+ status = config_ep_by_speed(f->config->cdev->gadget, f,
+ hidg->out_ep);
+ if (status) {
+ ERROR(cdev, "config_ep_by_speed FAILED!\n");
+ goto fail;
+ }
+ status = usb_ep_enable(hidg->out_ep);
+ if (status < 0) {
+ ERROR(cdev, "Enable IN endpoint FAILED!\n");
+ goto fail;
+ }
+ hidg->out_ep->driver_data = hidg;
+
+ /*
+ * allocate a bunch of read buffers and queue them all at once.
+ */
+ for (i = 0; i < hidg->qlen && status == 0; i++) {
+ struct usb_request *req =
+ hidg_alloc_ep_req(hidg->out_ep,
+ hidg->report_length);
+ if (req) {
+ req->complete = hidg_set_report_complete;
+ req->context = hidg;
+ status = usb_ep_queue(hidg->out_ep, req,
+ GFP_ATOMIC);
+ if (status)
+ ERROR(cdev, "%s queue req --> %d\n",
+ hidg->out_ep->name, status);
+ } else {
+ usb_ep_disable(hidg->out_ep);
+ hidg->out_ep->driver_data = NULL;
+ status = -ENOMEM;
+ goto fail;
+ }
+ }
+ }
+
fail:
return status;
}
@@ -470,13 +582,18 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
ep->driver_data = c->cdev; /* claim */
hidg->in_ep = ep;
+ ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_out_ep_desc);
+ if (!ep)
+ goto fail;
+ ep->driver_data = c->cdev; /* claim */
+ hidg->out_ep = ep;
+
/* preallocate request and buffer */
status = -ENOMEM;
hidg->req = usb_ep_alloc_request(hidg->in_ep, GFP_KERNEL);
if (!hidg->req)
goto fail;
-
hidg->req->buf = kmalloc(hidg->report_length, GFP_KERNEL);
if (!hidg->req->buf)
goto fail;
@@ -486,12 +603,12 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol;
hidg_hs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
hidg_fs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+ hidg_hs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+ hidg_fs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
hidg_desc.desc[0].bDescriptorType = HID_DT_REPORT;
hidg_desc.desc[0].wDescriptorLength =
cpu_to_le16(hidg->report_desc_length);
- hidg->set_report_buff = NULL;
-
/* copy descriptors */
f->descriptors = usb_copy_descriptors(hidg_fs_descriptors);
if (!f->descriptors)
@@ -500,6 +617,8 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
if (gadget_is_dualspeed(c->cdev->gadget)) {
hidg_hs_in_ep_desc.bEndpointAddress =
hidg_fs_in_ep_desc.bEndpointAddress;
+ hidg_hs_out_ep_desc.bEndpointAddress =
+ hidg_fs_out_ep_desc.bEndpointAddress;
f->hs_descriptors = usb_copy_descriptors(hidg_hs_descriptors);
if (!f->hs_descriptors)
goto fail;
@@ -509,6 +628,7 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
spin_lock_init(&hidg->spinlock);
init_waitqueue_head(&hidg->write_queue);
init_waitqueue_head(&hidg->read_queue);
+ INIT_LIST_HEAD(&hidg->completed_out_req);
/* create char device */
cdev_init(&hidg->cdev, &f_hidg_fops);
@@ -553,7 +673,6 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
usb_free_descriptors(f->descriptors);
kfree(hidg->report_desc);
- kfree(hidg->set_report_buff);
kfree(hidg);
}
@@ -624,6 +743,9 @@ int __init hidg_bind_config(struct usb_configuration *c,
hidg->func.disable = hidg_disable;
hidg->func.setup = hidg_setup;
+ /* this could me made configurable at some point */
+ hidg->qlen = 4;
+
status = usb_add_function(c, &hidg->func);
if (status)
kfree(hidg);
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index f67b453..4f1142e 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -44,12 +44,12 @@
* function for a USB device, it also illustrates a technique of
* double-buffering for increased throughput.
*
- * Function supports multiple logical units (LUNs). Backing storage
- * for each LUN is provided by a regular file or a block device.
- * Access for each LUN can be limited to read-only. Moreover, the
- * function can indicate that LUN is removable and/or CD-ROM. (The
- * later implies read-only access.)
- *
+ * For more information about MSF and in particular its module
+ * parameters and sysfs interface read the
+ * <Documentation/usb/mass-storage.txt> file.
+ */
+
+/*
* MSF is configured by specifying a fsg_config structure. It has the
* following fields:
*
@@ -75,25 +75,6 @@
* ->nofua Flag specifying that FUA flag in SCSI WRITE(10,12)
* commands for this LUN shall be ignored.
*
- * lun_name_format A printf-like format for names of the LUN
- * devices. This determines how the
- * directory in sysfs will be named.
- * Unless you are using several MSFs in
- * a single gadget (as opposed to single
- * MSF in many configurations) you may
- * leave it as NULL (in which case
- * "lun%d" will be used). In the format
- * you can use "%d" to index LUNs for
- * MSF's with more than one LUN. (Beware
- * that there is only one integer given
- * as an argument for the format and
- * specifying invalid format may cause
- * unspecified behaviour.)
- * thread_name Name of the kernel thread process used by the
- * MSF. You can safely set it to NULL
- * (in which case default "file-storage"
- * will be used).
- *
* vendor_name
* product_name
* release Information used as a reply to INQUIRY
@@ -114,62 +95,6 @@
* data track and no audio tracks; hence there need be only one
* backing file per LUN.
*
- *
- * MSF includes support for module parameters. If gadget using it
- * decides to use it, the following module parameters will be
- * available:
- *
- * file=filename[,filename...]
- * Names of the files or block devices used for
- * backing storage.
- * ro=b[,b...] Default false, boolean for read-only access.
- * removable=b[,b...]
- * Default true, boolean for removable media.
- * cdrom=b[,b...] Default false, boolean for whether to emulate
- * a CD-ROM drive.
- * nofua=b[,b...] Default false, booleans for ignore FUA flag
- * in SCSI WRITE(10,12) commands
- * luns=N Default N = number of filenames, number of
- * LUNs to support.
- * stall Default determined according to the type of
- * USB device controller (usually true),
- * boolean to permit the driver to halt
- * bulk endpoints.
- *
- * The module parameters may be prefixed with some string. You need
- * to consult gadget's documentation or source to verify whether it is
- * using those module parameters and if it does what are the prefixes
- * (look for FSG_MODULE_PARAMETERS() macro usage, what's inside it is
- * the prefix).
- *
- *
- * Requirements are modest; only a bulk-in and a bulk-out endpoint are
- * needed. The memory requirement amounts to two 16K buffers, size
- * configurable by a parameter. Support is included for both
- * full-speed and high-speed operation.
- *
- * Note that the driver is slightly non-portable in that it assumes a
- * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
- * interrupt-in endpoints. With most device controllers this isn't an
- * issue, but there may be some with hardware restrictions that prevent
- * a buffer from being used by more than one endpoint.
- *
- *
- * The pathnames of the backing files and the ro settings are
- * available in the attribute files "file" and "ro" in the lun<n> (or
- * to be more precise in a directory which name comes from
- * "lun_name_format" option!) subdirectory of the gadget's sysfs
- * directory. If the "removable" option is set, writing to these
- * files will simulate ejecting/loading the medium (writing an empty
- * line means eject) and adjusting a write-enable tab. Changes to the
- * ro setting are not allowed when the medium is loaded or if CD-ROM
- * emulation is being used.
- *
- * When a LUN receive an "eject" SCSI request (Start/Stop Unit),
- * if the LUN is removable, the backing file is released to simulate
- * ejection.
- *
- *
* This function is heavily based on "File-backed Storage Gadget" by
* Alan Stern which in turn is heavily based on "Gadget Zero" by David
* Brownell. The driver's SCSI command interface was based on the
@@ -211,7 +136,7 @@
* In normal operation the main thread is started during the gadget's
* fsg_bind() callback and stopped during fsg_unbind(). But it can
* also exit when it receives a signal, and there's no point leaving
- * the gadget running when the thread is dead. At of this moment, MSF
+ * the gadget running when the thread is dead. As of this moment, MSF
* provides no way to deregister the gadget when thread dies -- maybe
* a callback functions is needed.
*
@@ -417,9 +342,6 @@ struct fsg_config {
char nofua;
} luns[FSG_MAX_LUNS];
- const char *lun_name_format;
- const char *thread_name;
-
/* Callback functions. */
const struct fsg_operations *ops;
/* Gadget's private data. */
@@ -2687,11 +2609,15 @@ static int fsg_main_thread(void *common_)
/*************************** DEVICE ATTRIBUTES ***************************/
-/* Write permission is checked per LUN in store_*() functions. */
static DEVICE_ATTR(ro, 0644, fsg_show_ro, fsg_store_ro);
static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, fsg_store_nofua);
static DEVICE_ATTR(file, 0644, fsg_show_file, fsg_store_file);
+static struct device_attribute dev_attr_ro_cdrom =
+ __ATTR(ro, 0444, fsg_show_ro, NULL);
+static struct device_attribute dev_attr_file_nonremovable =
+ __ATTR(file, 0444, fsg_show_file, NULL);
+
/****************************** FSG COMMON ******************************/
@@ -2792,11 +2718,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
curlun->dev.parent = &gadget->dev;
/* curlun->dev.driver = &fsg_driver.driver; XXX */
dev_set_drvdata(&curlun->dev, &common->filesem);
- dev_set_name(&curlun->dev,
- cfg->lun_name_format
- ? cfg->lun_name_format
- : "lun%d",
- i);
+ dev_set_name(&curlun->dev, "lun%d", i);
rc = device_register(&curlun->dev);
if (rc) {
@@ -2806,10 +2728,16 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
goto error_release;
}
- rc = device_create_file(&curlun->dev, &dev_attr_ro);
+ rc = device_create_file(&curlun->dev,
+ curlun->cdrom
+ ? &dev_attr_ro_cdrom
+ : &dev_attr_ro);
if (rc)
goto error_luns;
- rc = device_create_file(&curlun->dev, &dev_attr_file);
+ rc = device_create_file(&curlun->dev,
+ curlun->removable
+ ? &dev_attr_file
+ : &dev_attr_file_nonremovable);
if (rc)
goto error_luns;
rc = device_create_file(&curlun->dev, &dev_attr_nofua);
@@ -2878,8 +2806,7 @@ buffhds_first_it:
/* Tell the thread to start working */
common->thread_task =
- kthread_create(fsg_main_thread, common,
- cfg->thread_name ?: "file-storage");
+ kthread_create(fsg_main_thread, common, "file-storage");
if (IS_ERR(common->thread_task)) {
rc = PTR_ERR(common->thread_task);
goto error_release;
@@ -2945,8 +2872,14 @@ static void fsg_common_release(struct kref *ref)
/* In error recovery common->nluns may be zero. */
for (; i; --i, ++lun) {
device_remove_file(&lun->dev, &dev_attr_nofua);
- device_remove_file(&lun->dev, &dev_attr_ro);
- device_remove_file(&lun->dev, &dev_attr_file);
+ device_remove_file(&lun->dev,
+ lun->cdrom
+ ? &dev_attr_ro_cdrom
+ : &dev_attr_ro);
+ device_remove_file(&lun->dev,
+ lun->removable
+ ? &dev_attr_file
+ : &dev_attr_file_nonremovable);
fsg_lun_close(lun);
device_unregister(&lun->dev);
}
@@ -3167,8 +3100,7 @@ fsg_config_from_params(struct fsg_config *cfg,
for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
lun->ro = !!params->ro[i];
lun->cdrom = !!params->cdrom[i];
- lun->removable = /* Removable by default */
- params->removable_count <= i || params->removable[i];
+ lun->removable = !!params->removable[i];
lun->filename =
params->file_count > i && params->file[i][0]
? params->file[i]
@@ -3176,8 +3108,6 @@ fsg_config_from_params(struct fsg_config *cfg,
}
/* Let MSF use defaults */
- cfg->lun_name_format = 0;
- cfg->thread_name = 0;
cfg->vendor_name = 0;
cfg->product_name = 0;
cfg->release = 0xffff;
@@ -3203,4 +3133,3 @@ fsg_common_from_params(struct fsg_common *common,
fsg_config_from_params(&cfg, params);
return fsg_common_init(common, cdev, &cfg);
}
-
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index 2022fe49..2a8bf06 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -29,6 +29,25 @@
unsigned int uvc_gadget_trace_param;
+/*-------------------------------------------------------------------------*/
+
+/* module parameters specific to the Video streaming endpoint */
+static unsigned streaming_interval = 1;
+module_param(streaming_interval, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_interval, "1 - 16");
+
+static unsigned streaming_maxpacket = 1024;
+module_param(streaming_maxpacket, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
+
+static unsigned streaming_mult;
+module_param(streaming_mult, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_mult, "0 - 2 (hs/ss only)");
+
+static unsigned streaming_maxburst;
+module_param(streaming_maxburst, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)");
+
/* --------------------------------------------------------------------------
* Function descriptors
*/
@@ -59,6 +78,8 @@ static struct usb_gadget_strings *uvc_function_strings[] = {
#define UVC_INTF_VIDEO_CONTROL 0
#define UVC_INTF_VIDEO_STREAMING 1
+#define STATUS_BYTECOUNT 16 /* 16 bytes status */
+
static struct usb_interface_assoc_descriptor uvc_iad __initdata = {
.bLength = sizeof(uvc_iad),
.bDescriptorType = USB_DT_INTERFACE_ASSOCIATION,
@@ -82,12 +103,12 @@ static struct usb_interface_descriptor uvc_control_intf __initdata = {
.iInterface = 0,
};
-static struct usb_endpoint_descriptor uvc_control_ep __initdata = {
+static struct usb_endpoint_descriptor uvc_fs_control_ep __initdata = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = cpu_to_le16(16),
+ .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT),
.bInterval = 8,
};
@@ -95,7 +116,7 @@ static struct uvc_control_endpoint_descriptor uvc_control_cs_ep __initdata = {
.bLength = UVC_DT_CONTROL_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_CS_ENDPOINT,
.bDescriptorSubType = UVC_EP_INTERRUPT,
- .wMaxTransferSize = cpu_to_le16(16),
+ .wMaxTransferSize = cpu_to_le16(STATUS_BYTECOUNT),
};
static struct usb_interface_descriptor uvc_streaming_intf_alt0 __initdata = {
@@ -122,7 +143,7 @@ static struct usb_interface_descriptor uvc_streaming_intf_alt1 __initdata = {
.iInterface = 0,
};
-static struct usb_endpoint_descriptor uvc_streaming_ep = {
+static struct usb_endpoint_descriptor uvc_fs_streaming_ep = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
@@ -131,15 +152,72 @@ static struct usb_endpoint_descriptor uvc_streaming_ep = {
.bInterval = 1,
};
+static struct usb_endpoint_descriptor uvc_hs_streaming_ep = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_ISOC,
+ .wMaxPacketSize = cpu_to_le16(1024),
+ .bInterval = 1,
+};
+
+/* super speed support */
+static struct usb_endpoint_descriptor uvc_ss_control_ep __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT),
+ .bInterval = 8,
+};
+
+static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp __initdata = {
+ .bLength = sizeof uvc_ss_control_comp,
+ .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
+
+ /* the following 3 values can be tweaked if necessary */
+ /* .bMaxBurst = 0, */
+ /* .bmAttributes = 0, */
+ .wBytesPerInterval = cpu_to_le16(STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_ISOC,
+ .wMaxPacketSize = cpu_to_le16(1024),
+ .bInterval = 4,
+};
+
+static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp = {
+ .bLength = sizeof uvc_ss_streaming_comp,
+ .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
+
+ /* the following 3 values can be tweaked if necessary */
+ .bMaxBurst = 0,
+ .bmAttributes = 0,
+ .wBytesPerInterval = cpu_to_le16(1024),
+};
+
static const struct usb_descriptor_header * const uvc_fs_streaming[] = {
(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
- (struct usb_descriptor_header *) &uvc_streaming_ep,
+ (struct usb_descriptor_header *) &uvc_fs_streaming_ep,
NULL,
};
static const struct usb_descriptor_header * const uvc_hs_streaming[] = {
(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
- (struct usb_descriptor_header *) &uvc_streaming_ep,
+ (struct usb_descriptor_header *) &uvc_hs_streaming_ep,
+ NULL,
+};
+
+static const struct usb_descriptor_header * const uvc_ss_streaming[] = {
+ (struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
+ (struct usb_descriptor_header *) &uvc_ss_streaming_ep,
+ (struct usb_descriptor_header *) &uvc_ss_streaming_comp,
NULL,
};
@@ -215,6 +293,7 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
struct uvc_device *uvc = to_uvc(f);
struct v4l2_event v4l2_event;
struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
+ int ret;
INFO(f->config->cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt);
@@ -262,7 +341,10 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
return 0;
if (uvc->video.ep) {
- uvc->video.ep->desc = &uvc_streaming_ep;
+ ret = config_ep_by_speed(f->config->cdev->gadget,
+ &(uvc->func), uvc->video.ep);
+ if (ret)
+ return ret;
usb_ep_enable(uvc->video.ep);
}
@@ -368,9 +450,11 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
{
struct uvc_input_header_descriptor *uvc_streaming_header;
struct uvc_header_descriptor *uvc_control_header;
+ const struct uvc_descriptor_header * const *uvc_control_desc;
const struct uvc_descriptor_header * const *uvc_streaming_cls;
const struct usb_descriptor_header * const *uvc_streaming_std;
const struct usb_descriptor_header * const *src;
+ static struct usb_endpoint_descriptor *uvc_control_ep;
struct usb_descriptor_header **dst;
struct usb_descriptor_header **hdr;
unsigned int control_size;
@@ -379,10 +463,29 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
unsigned int bytes;
void *mem;
- uvc_streaming_cls = (speed == USB_SPEED_FULL)
- ? uvc->desc.fs_streaming : uvc->desc.hs_streaming;
- uvc_streaming_std = (speed == USB_SPEED_FULL)
- ? uvc_fs_streaming : uvc_hs_streaming;
+ switch (speed) {
+ case USB_SPEED_SUPER:
+ uvc_control_desc = uvc->desc.ss_control;
+ uvc_streaming_cls = uvc->desc.ss_streaming;
+ uvc_streaming_std = uvc_ss_streaming;
+ uvc_control_ep = &uvc_ss_control_ep;
+ break;
+
+ case USB_SPEED_HIGH:
+ uvc_control_desc = uvc->desc.fs_control;
+ uvc_streaming_cls = uvc->desc.hs_streaming;
+ uvc_streaming_std = uvc_hs_streaming;
+ uvc_control_ep = &uvc_fs_control_ep;
+ break;
+
+ case USB_SPEED_FULL:
+ default:
+ uvc_control_desc = uvc->desc.fs_control;
+ uvc_streaming_cls = uvc->desc.fs_streaming;
+ uvc_streaming_std = uvc_fs_streaming;
+ uvc_control_ep = &uvc_fs_control_ep;
+ break;
+ }
/* Descriptors layout
*
@@ -400,16 +503,24 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
control_size = 0;
streaming_size = 0;
bytes = uvc_iad.bLength + uvc_control_intf.bLength
- + uvc_control_ep.bLength + uvc_control_cs_ep.bLength
+ + uvc_control_ep->bLength + uvc_control_cs_ep.bLength
+ uvc_streaming_intf_alt0.bLength;
- n_desc = 5;
- for (src = (const struct usb_descriptor_header**)uvc->desc.control; *src; ++src) {
+ if (speed == USB_SPEED_SUPER) {
+ bytes += uvc_ss_control_comp.bLength;
+ n_desc = 6;
+ } else {
+ n_desc = 5;
+ }
+
+ for (src = (const struct usb_descriptor_header **)uvc_control_desc;
+ *src; ++src) {
control_size += (*src)->bLength;
bytes += (*src)->bLength;
n_desc++;
}
- for (src = (const struct usb_descriptor_header**)uvc_streaming_cls; *src; ++src) {
+ for (src = (const struct usb_descriptor_header **)uvc_streaming_cls;
+ *src; ++src) {
streaming_size += (*src)->bLength;
bytes += (*src)->bLength;
n_desc++;
@@ -433,12 +544,15 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
uvc_control_header = mem;
UVC_COPY_DESCRIPTORS(mem, dst,
- (const struct usb_descriptor_header**)uvc->desc.control);
+ (const struct usb_descriptor_header **)uvc_control_desc);
uvc_control_header->wTotalLength = cpu_to_le16(control_size);
uvc_control_header->bInCollection = 1;
uvc_control_header->baInterfaceNr[0] = uvc->streaming_intf;
- UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_ep);
+ UVC_COPY_DESCRIPTOR(mem, dst, uvc_control_ep);
+ if (speed == USB_SPEED_SUPER)
+ UVC_COPY_DESCRIPTOR(mem, dst, &uvc_ss_control_comp);
+
UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_cs_ep);
UVC_COPY_DESCRIPTOR(mem, dst, &uvc_streaming_intf_alt0);
@@ -446,7 +560,8 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
UVC_COPY_DESCRIPTORS(mem, dst,
(const struct usb_descriptor_header**)uvc_streaming_cls);
uvc_streaming_header->wTotalLength = cpu_to_le16(streaming_size);
- uvc_streaming_header->bEndpointAddress = uvc_streaming_ep.bEndpointAddress;
+ uvc_streaming_header->bEndpointAddress =
+ uvc_fs_streaming_ep.bEndpointAddress;
UVC_COPY_DESCRIPTORS(mem, dst, uvc_streaming_std);
@@ -482,6 +597,7 @@ uvc_function_unbind(struct usb_configuration *c, struct usb_function *f)
kfree(f->descriptors);
kfree(f->hs_descriptors);
+ kfree(f->ss_descriptors);
kfree(uvc);
}
@@ -496,8 +612,26 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
INFO(cdev, "uvc_function_bind\n");
+ /* sanity check the streaming endpoint module parameters */
+ if (streaming_interval < 1)
+ streaming_interval = 1;
+ if (streaming_interval > 16)
+ streaming_interval = 16;
+ if (streaming_mult > 2)
+ streaming_mult = 2;
+ if (streaming_maxburst > 15)
+ streaming_maxburst = 15;
+
+ /*
+ * fill in the FS video streaming specific descriptors from the
+ * module parameters
+ */
+ uvc_fs_streaming_ep.wMaxPacketSize = streaming_maxpacket > 1023 ?
+ 1023 : streaming_maxpacket;
+ uvc_fs_streaming_ep.bInterval = streaming_interval;
+
/* Allocate endpoints. */
- ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep);
+ ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_control_ep);
if (!ep) {
INFO(cdev, "Unable to allocate control EP\n");
goto error;
@@ -505,7 +639,7 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
uvc->control_ep = ep;
ep->driver_data = uvc;
- ep = usb_ep_autoconfig(cdev->gadget, &uvc_streaming_ep);
+ ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep);
if (!ep) {
INFO(cdev, "Unable to allocate streaming EP\n");
goto error;
@@ -526,9 +660,52 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
uvc_streaming_intf_alt1.bInterfaceNumber = ret;
uvc->streaming_intf = ret;
- /* Copy descriptors. */
+ /* sanity check the streaming endpoint module parameters */
+ if (streaming_maxpacket > 1024)
+ streaming_maxpacket = 1024;
+
+ /* Copy descriptors for FS. */
f->descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL);
- f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
+
+ /* support high speed hardware */
+ if (gadget_is_dualspeed(cdev->gadget)) {
+ /*
+ * Fill in the HS descriptors from the module parameters for the
+ * Video Streaming endpoint.
+ * NOTE: We assume that the user knows what they are doing and
+ * won't give parameters that their UDC doesn't support.
+ */
+ uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket;
+ uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11;
+ uvc_hs_streaming_ep.bInterval = streaming_interval;
+ uvc_hs_streaming_ep.bEndpointAddress =
+ uvc_fs_streaming_ep.bEndpointAddress;
+
+ /* Copy descriptors. */
+ f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
+ }
+
+ /* support super speed hardware */
+ if (gadget_is_superspeed(c->cdev->gadget)) {
+ /*
+ * Fill in the SS descriptors from the module parameters for the
+ * Video Streaming endpoint.
+ * NOTE: We assume that the user knows what they are doing and
+ * won't give parameters that their UDC doesn't support.
+ */
+ uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket;
+ uvc_ss_streaming_ep.bInterval = streaming_interval;
+ uvc_ss_streaming_comp.bmAttributes = streaming_mult;
+ uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst;
+ uvc_ss_streaming_comp.wBytesPerInterval =
+ streaming_maxpacket * (streaming_mult + 1) *
+ (streaming_maxburst + 1);
+ uvc_ss_streaming_ep.bEndpointAddress =
+ uvc_fs_streaming_ep.bEndpointAddress;
+
+ /* Copy descriptors. */
+ f->ss_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_SUPER);
+ }
/* Preallocate control endpoint request. */
uvc->control_req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
@@ -583,9 +760,11 @@ error:
*/
int __init
uvc_bind_config(struct usb_configuration *c,
- const struct uvc_descriptor_header * const *control,
+ const struct uvc_descriptor_header * const *fs_control,
+ const struct uvc_descriptor_header * const *ss_control,
const struct uvc_descriptor_header * const *fs_streaming,
- const struct uvc_descriptor_header * const *hs_streaming)
+ const struct uvc_descriptor_header * const *hs_streaming,
+ const struct uvc_descriptor_header * const *ss_streaming)
{
struct uvc_device *uvc;
int ret = 0;
@@ -603,38 +782,54 @@ uvc_bind_config(struct usb_configuration *c,
uvc->state = UVC_STATE_DISCONNECTED;
/* Validate the descriptors. */
- if (control == NULL || control[0] == NULL ||
- control[0]->bDescriptorSubType != UVC_VC_HEADER)
+ if (fs_control == NULL || fs_control[0] == NULL ||
+ fs_control[0]->bDescriptorSubType != UVC_VC_HEADER)
goto error;
- if (fs_streaming == NULL || fs_streaming[0] == NULL ||
- fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
+ if (ss_control == NULL || ss_control[0] == NULL ||
+ ss_control[0]->bDescriptorSubType != UVC_VC_HEADER)
goto error;
- if (hs_streaming == NULL || hs_streaming[0] == NULL ||
- hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
+ if (fs_streaming == NULL || fs_streaming[0] == NULL ||
+ fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
goto error;
- uvc->desc.control = control;
- uvc->desc.fs_streaming = fs_streaming;
- uvc->desc.hs_streaming = hs_streaming;
-
- /* Allocate string descriptor numbers. */
- if ((ret = usb_string_id(c->cdev)) < 0)
+ if (hs_streaming == NULL || hs_streaming[0] == NULL ||
+ hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
goto error;
- uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret;
- uvc_iad.iFunction = ret;
- if ((ret = usb_string_id(c->cdev)) < 0)
+ if (ss_streaming == NULL || ss_streaming[0] == NULL ||
+ ss_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
goto error;
- uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret;
- uvc_control_intf.iInterface = ret;
- if ((ret = usb_string_id(c->cdev)) < 0)
- goto error;
- uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret;
- uvc_streaming_intf_alt0.iInterface = ret;
- uvc_streaming_intf_alt1.iInterface = ret;
+ uvc->desc.fs_control = fs_control;
+ uvc->desc.ss_control = ss_control;
+ uvc->desc.fs_streaming = fs_streaming;
+ uvc->desc.hs_streaming = hs_streaming;
+ uvc->desc.ss_streaming = ss_streaming;
+
+ /* maybe allocate device-global string IDs, and patch descriptors */
+ if (uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id == 0) {
+ /* Allocate string descriptor numbers. */
+ ret = usb_string_id(c->cdev);
+ if (ret < 0)
+ goto error;
+ uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret;
+ uvc_iad.iFunction = ret;
+
+ ret = usb_string_id(c->cdev);
+ if (ret < 0)
+ goto error;
+ uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret;
+ uvc_control_intf.iInterface = ret;
+
+ ret = usb_string_id(c->cdev);
+ if (ret < 0)
+ goto error;
+ uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret;
+ uvc_streaming_intf_alt0.iInterface = ret;
+ uvc_streaming_intf_alt1.iInterface = ret;
+ }
/* Register the function. */
uvc->func.name = "uvc";
diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h
index abf8329..c3d258d 100644
--- a/drivers/usb/gadget/f_uvc.h
+++ b/drivers/usb/gadget/f_uvc.h
@@ -17,9 +17,11 @@
#include <linux/usb/video.h>
extern int uvc_bind_config(struct usb_configuration *c,
- const struct uvc_descriptor_header * const *control,
- const struct uvc_descriptor_header * const *fs_streaming,
- const struct uvc_descriptor_header * const *hs_streaming);
+ const struct uvc_descriptor_header * const *fs_control,
+ const struct uvc_descriptor_header * const *hs_control,
+ const struct uvc_descriptor_header * const *fs_streaming,
+ const struct uvc_descriptor_header * const *hs_streaming,
+ const struct uvc_descriptor_header * const *ss_streaming);
#endif /* _F_UVC_H_ */
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index dcbc0a2..1b0f086 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -21,7 +21,8 @@
#include <mach/hardware.h>
static struct clk *mxc_ahb_clk;
-static struct clk *mxc_usb_clk;
+static struct clk *mxc_per_clk;
+static struct clk *mxc_ipg_clk;
/* workaround ENGcm09152 for i.MX35 */
#define USBPHYCTRL_OTGBASE_OFFSET 0x608
@@ -35,28 +36,31 @@ int fsl_udc_clk_init(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
- if (!cpu_is_mx35() && !cpu_is_mx25()) {
- mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
- if (IS_ERR(mxc_ahb_clk))
- return PTR_ERR(mxc_ahb_clk);
+ mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(mxc_ipg_clk)) {
+ dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
+ return PTR_ERR(mxc_ipg_clk);
+ }
- ret = clk_enable(mxc_ahb_clk);
- if (ret < 0) {
- dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
- goto eenahb;
- }
+ mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(mxc_ahb_clk)) {
+ dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
+ return PTR_ERR(mxc_ahb_clk);
}
- /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
- mxc_usb_clk = clk_get(&pdev->dev, "usb");
- if (IS_ERR(mxc_usb_clk)) {
- dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
- ret = PTR_ERR(mxc_usb_clk);
- goto egusb;
+ mxc_per_clk = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(mxc_per_clk)) {
+ dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
+ return PTR_ERR(mxc_per_clk);
}
+ clk_prepare_enable(mxc_ipg_clk);
+ clk_prepare_enable(mxc_ahb_clk);
+ clk_prepare_enable(mxc_per_clk);
+
+ /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
if (!cpu_is_mx51()) {
- freq = clk_get_rate(mxc_usb_clk);
+ freq = clk_get_rate(mxc_per_clk);
if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
(freq < 59999000 || freq > 60001000)) {
dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
@@ -65,24 +69,13 @@ int fsl_udc_clk_init(struct platform_device *pdev)
}
}
- ret = clk_enable(mxc_usb_clk);
- if (ret < 0) {
- dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
- goto eenusb;
- }
-
return 0;
-eenusb:
eclkrate:
- clk_put(mxc_usb_clk);
- mxc_usb_clk = NULL;
-egusb:
- if (!cpu_is_mx35())
- clk_disable(mxc_ahb_clk);
-eenahb:
- if (!cpu_is_mx35())
- clk_put(mxc_ahb_clk);
+ clk_disable_unprepare(mxc_ipg_clk);
+ clk_disable_unprepare(mxc_ahb_clk);
+ clk_disable_unprepare(mxc_per_clk);
+ mxc_per_clk = NULL;
return ret;
}
@@ -104,20 +97,15 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
/* ULPI transceivers don't need usbpll */
if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
- clk_disable(mxc_usb_clk);
- clk_put(mxc_usb_clk);
- mxc_usb_clk = NULL;
+ clk_disable_unprepare(mxc_per_clk);
+ mxc_per_clk = NULL;
}
}
void fsl_udc_clk_release(void)
{
- if (mxc_usb_clk) {
- clk_disable(mxc_usb_clk);
- clk_put(mxc_usb_clk);
- }
- if (!cpu_is_mx35()) {
- clk_disable(mxc_ahb_clk);
- clk_put(mxc_ahb_clk);
- }
+ if (mxc_per_clk)
+ clk_disable_unprepare(mxc_per_clk);
+ clk_disable_unprepare(mxc_ahb_clk);
+ clk_disable_unprepare(mxc_ipg_clk);
}
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index bc6f9bb..3def828 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -24,6 +24,7 @@
#include <linux/ioport.h>
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/list.h>
@@ -1229,7 +1230,7 @@ static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
struct fsl_udc *udc;
udc = container_of(gadget, struct fsl_udc, gadget);
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
return usb_phy_set_power(udc->transceiver, mA);
return -ENOTSUPP;
}
@@ -1983,13 +1984,13 @@ static int fsl_start(struct usb_gadget_driver *driver,
goto out;
}
- if (udc_controller->transceiver) {
+ if (!IS_ERR_OR_NULL(udc_controller->transceiver)) {
/* Suspend the controller until OTG enable it */
udc_controller->stopped = 1;
printk(KERN_INFO "Suspend udc for OTG auto detect\n");
/* connect to bus through transceiver */
- if (udc_controller->transceiver) {
+ if (!IS_ERR_OR_NULL(udc_controller->transceiver)) {
retval = otg_set_peripheral(
udc_controller->transceiver->otg,
&udc_controller->gadget);
@@ -2030,7 +2031,7 @@ static int fsl_stop(struct usb_gadget_driver *driver)
if (!driver || driver != udc_controller->driver || !driver->unbind)
return -EINVAL;
- if (udc_controller->transceiver)
+ if (!IS_ERR_OR_NULL(udc_controller->transceiver))
otg_set_peripheral(udc_controller->transceiver->otg, NULL);
/* stop DR, disable intr */
@@ -2455,8 +2456,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
#ifdef CONFIG_USB_OTG
if (pdata->operating_mode == FSL_USB2_DR_OTG) {
- udc_controller->transceiver = usb_get_transceiver();
- if (!udc_controller->transceiver) {
+ udc_controller->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (IS_ERR_OR_NULL(udc_controller->transceiver)) {
ERR("Can't find OTG driver!\n");
ret = -ENODEV;
goto err_kfree;
@@ -2540,7 +2541,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
goto err_free_irq;
}
- if (!udc_controller->transceiver) {
+ if (IS_ERR_OR_NULL(udc_controller->transceiver)) {
/* initialize usb hw reg except for regs for EP,
* leave usbintr reg untouched */
dr_controller_setup(udc_controller);
@@ -2560,11 +2561,12 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
dev_set_name(&udc_controller->gadget.dev, "gadget");
udc_controller->gadget.dev.release = fsl_udc_release;
udc_controller->gadget.dev.parent = &pdev->dev;
+ udc_controller->gadget.dev.of_node = pdev->dev.of_node;
ret = device_register(&udc_controller->gadget.dev);
if (ret < 0)
goto err_free_irq;
- if (udc_controller->transceiver)
+ if (!IS_ERR_OR_NULL(udc_controller->transceiver))
udc_controller->gadget.is_otg = 1;
/* setup QH and epctrl for ep0 */
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 54034f8..dc53348 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1432,7 +1432,7 @@ static int __init imx_udc_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "can't get USB clock\n");
goto fail2;
}
- clk_enable(clk);
+ clk_prepare_enable(clk);
if (clk_get_rate(clk) != 48000000) {
D_INI(&pdev->dev,
@@ -1496,7 +1496,7 @@ fail4:
free_irq(imx_usb->usbd_int[i], imx_usb);
fail3:
clk_put(clk);
- clk_disable(clk);
+ clk_disable_unprepare(clk);
fail2:
iounmap(base);
fail1:
@@ -1521,7 +1521,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
free_irq(imx_usb->usbd_int[i], imx_usb);
clk_put(imx_usb->clk);
- clk_disable(imx_usb->clk);
+ clk_disable_unprepare(imx_usb->clk);
iounmap(imx_usb->base);
release_mem_region(imx_usb->res->start, resource_size(imx_usb->res));
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 2ab0388..f1ec99e 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -165,6 +165,7 @@ struct lpc32xx_udc {
int udp_irq[4];
struct clk *usb_pll_clk;
struct clk *usb_slv_clk;
+ struct clk *usb_otg_clk;
/* DMA support */
u32 *udca_v_base;
@@ -227,33 +228,15 @@ static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g)
#define UDCA_BUFF_SIZE (128)
/* TODO: When the clock framework is introduced in LPC32xx, IO_ADDRESS will
- * be replaced with an inremap()ed pointer, see USB_OTG_CLK_CTRL()
+ * be replaced with an inremap()ed pointer
* */
#define USB_CTRL IO_ADDRESS(LPC32XX_CLK_PM_BASE + 0x64)
-#define USB_CLOCK_MASK (AHB_M_CLOCK_ON | OTG_CLOCK_ON | \
- DEV_CLOCK_ON | I2C_CLOCK_ON)
/* USB_CTRL bit defines */
#define USB_SLAVE_HCLK_EN (1 << 24)
#define USB_HOST_NEED_CLK_EN (1 << 21)
#define USB_DEV_NEED_CLK_EN (1 << 22)
-#define USB_OTG_CLK_CTRL(udc) ((udc)->udp_baseaddr + 0xFF4)
-#define USB_OTG_CLK_STAT(udc) ((udc)->udp_baseaddr + 0xFF8)
-
-/* USB_OTG_CLK_CTRL bit defines */
-#define AHB_M_CLOCK_ON (1 << 4)
-#define OTG_CLOCK_ON (1 << 3)
-#define I2C_CLOCK_ON (1 << 2)
-#define DEV_CLOCK_ON (1 << 1)
-#define HOST_CLOCK_ON (1 << 0)
-
-#define USB_OTG_STAT_CONTROL(udc) (udc->udp_baseaddr + 0x110)
-
-/* USB_OTG_STAT_CONTROL bit defines */
-#define TRANSPARENT_I2C_EN (1 << 7)
-#define HOST_EN (1 << 0)
-
/**********************************************************************
* USB device controller register offsets
**********************************************************************/
@@ -677,7 +660,7 @@ static void isp1301_udc_configure(struct lpc32xx_udc *udc)
ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD);
/* Enable usb_need_clk clock after transceiver is initialized */
- writel((readl(USB_CTRL) | (1 << 22)), USB_CTRL);
+ writel((readl(USB_CTRL) | USB_DEV_NEED_CLK_EN), USB_CTRL);
dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n",
i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00));
@@ -1010,11 +993,8 @@ static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd)
/* Enables or disables most of the USB system clocks when low power mode is
* needed. Clocks are typically started on a connection event, and disabled
* when a cable is disconnected */
-#define OTGOFF_CLK_MASK (AHB_M_CLOCK_ON | I2C_CLOCK_ON)
static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
{
- int to = 1000;
-
if (enable != 0) {
if (udc->clocked)
return;
@@ -1028,14 +1008,7 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN,
USB_CTRL);
- /* Set to enable all needed USB OTG clocks */
- writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc));
-
- while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) !=
- USB_CLOCK_MASK) && (to > 0))
- to--;
- if (!to)
- dev_dbg(udc->dev, "Cannot enable USB OTG clocking\n");
+ clk_enable(udc->usb_otg_clk);
} else {
if (!udc->clocked)
return;
@@ -1047,19 +1020,11 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
/* 48MHz PLL dpwn */
clk_disable(udc->usb_pll_clk);
- /* Enable the USB device clock */
+ /* Disable the USB device clock */
writel(readl(USB_CTRL) & ~USB_DEV_NEED_CLK_EN,
USB_CTRL);
- /* Set to enable all needed USB OTG clocks */
- writel(OTGOFF_CLK_MASK, USB_OTG_CLK_CTRL(udc));
-
- while (((readl(USB_OTG_CLK_STAT(udc)) &
- OTGOFF_CLK_MASK) !=
- OTGOFF_CLK_MASK) && (to > 0))
- to--;
- if (!to)
- dev_dbg(udc->dev, "Cannot disable USB OTG clocking\n");
+ clk_disable(udc->usb_otg_clk);
}
}
@@ -3041,6 +3006,7 @@ static int lpc32xx_start(struct usb_gadget_driver *driver,
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
+ udc->gadget.dev.of_node = udc->dev->of_node;
udc->enabled = 1;
udc->selfpowered = 1;
udc->vbus = 0;
@@ -3239,6 +3205,12 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
retval = PTR_ERR(udc->usb_slv_clk);
goto usb_clk_get_fail;
}
+ udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg");
+ if (IS_ERR(udc->usb_otg_clk)) {
+ dev_err(udc->dev, "failed to acquire USB otg clock\n");
+ retval = PTR_ERR(udc->usb_slv_clk);
+ goto usb_otg_clk_get_fail;
+ }
/* Setup PLL clock to 48MHz */
retval = clk_enable(udc->usb_pll_clk);
@@ -3262,15 +3234,12 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
goto usb_clk_enable_fail;
}
- /* Set to enable all needed USB OTG clocks */
- writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc));
-
- i = 1000;
- while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) !=
- USB_CLOCK_MASK) && (i > 0))
- i--;
- if (!i)
- dev_dbg(udc->dev, "USB OTG clocks not correctly enabled\n");
+ /* Enable USB OTG clock */
+ retval = clk_enable(udc->usb_otg_clk);
+ if (retval < 0) {
+ dev_err(udc->dev, "failed to start USB otg clock\n");
+ goto usb_otg_clk_enable_fail;
+ }
/* Setup deferred workqueue data */
udc->poweron = udc->pullup = 0;
@@ -3390,12 +3359,16 @@ dma_alloc_fail:
dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
udc->udca_v_base, udc->udca_p_base);
i2c_fail:
+ clk_disable(udc->usb_otg_clk);
+usb_otg_clk_enable_fail:
clk_disable(udc->usb_slv_clk);
usb_clk_enable_fail:
pll_set_fail:
clk_disable(udc->usb_pll_clk);
pll_enable_fail:
clk_put(udc->usb_slv_clk);
+usb_otg_clk_get_fail:
+ clk_put(udc->usb_otg_clk);
usb_clk_get_fail:
clk_put(udc->usb_pll_clk);
pll_get_fail:
@@ -3433,6 +3406,8 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
device_unregister(&udc->gadget.dev);
+ clk_disable(udc->usb_otg_clk);
+ clk_put(udc->usb_otg_clk);
clk_disable(udc->usb_slv_clk);
clk_put(udc->usb_slv_clk);
clk_disable(udc->usb_pll_clk);
@@ -3446,7 +3421,6 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg)
{
- int to = 1000;
struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
if (udc->clocked) {
@@ -3461,15 +3435,6 @@ static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg)
on resume */
udc->clocked = 1;
- /* Kill OTG and I2C clocks */
- writel(0, USB_OTG_CLK_CTRL(udc));
- while (((readl(USB_OTG_CLK_STAT(udc)) & OTGOFF_CLK_MASK) !=
- OTGOFF_CLK_MASK) && (to > 0))
- to--;
- if (!to)
- dev_dbg(udc->dev,
- "USB OTG clocks not correctly enabled\n");
-
/* Kill global USB clock */
clk_disable(udc->usb_slv_clk);
}
diff --git a/drivers/usb/gadget/mv_u3d.h b/drivers/usb/gadget/mv_u3d.h
new file mode 100644
index 0000000..e32a787
--- /dev/null
+++ b/drivers/usb/gadget/mv_u3d.h
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef __MV_U3D_H
+#define __MV_U3D_H
+
+#define MV_U3D_EP_CONTEXT_ALIGNMENT 32
+#define MV_U3D_TRB_ALIGNMENT 16
+#define MV_U3D_DMA_BOUNDARY 4096
+#define MV_U3D_EP0_MAX_PKT_SIZE 512
+
+/* ep0 transfer state */
+#define MV_U3D_WAIT_FOR_SETUP 0
+#define MV_U3D_DATA_STATE_XMIT 1
+#define MV_U3D_DATA_STATE_NEED_ZLP 2
+#define MV_U3D_WAIT_FOR_OUT_STATUS 3
+#define MV_U3D_DATA_STATE_RECV 4
+#define MV_U3D_STATUS_STAGE 5
+
+#define MV_U3D_EP_MAX_LENGTH_TRANSFER 0x10000
+
+/* USB3 Interrupt Status */
+#define MV_U3D_USBINT_SETUP 0x00000001
+#define MV_U3D_USBINT_RX_COMPLETE 0x00000002
+#define MV_U3D_USBINT_TX_COMPLETE 0x00000004
+#define MV_U3D_USBINT_UNDER_RUN 0x00000008
+#define MV_U3D_USBINT_RXDESC_ERR 0x00000010
+#define MV_U3D_USBINT_TXDESC_ERR 0x00000020
+#define MV_U3D_USBINT_RX_TRB_COMPLETE 0x00000040
+#define MV_U3D_USBINT_TX_TRB_COMPLETE 0x00000080
+#define MV_U3D_USBINT_VBUS_VALID 0x00010000
+#define MV_U3D_USBINT_STORAGE_CMD_FULL 0x00020000
+#define MV_U3D_USBINT_LINK_CHG 0x01000000
+
+/* USB3 Interrupt Enable */
+#define MV_U3D_INTR_ENABLE_SETUP 0x00000001
+#define MV_U3D_INTR_ENABLE_RX_COMPLETE 0x00000002
+#define MV_U3D_INTR_ENABLE_TX_COMPLETE 0x00000004
+#define MV_U3D_INTR_ENABLE_UNDER_RUN 0x00000008
+#define MV_U3D_INTR_ENABLE_RXDESC_ERR 0x00000010
+#define MV_U3D_INTR_ENABLE_TXDESC_ERR 0x00000020
+#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE 0x00000040
+#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE 0x00000080
+#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR 0x00000100
+#define MV_U3D_INTR_ENABLE_VBUS_VALID 0x00010000
+#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL 0x00020000
+#define MV_U3D_INTR_ENABLE_LINK_CHG 0x01000000
+#define MV_U3D_INTR_ENABLE_PRIME_STATUS 0x02000000
+
+/* USB3 Link Change */
+#define MV_U3D_LINK_CHANGE_LINK_UP 0x00000001
+#define MV_U3D_LINK_CHANGE_SUSPEND 0x00000002
+#define MV_U3D_LINK_CHANGE_RESUME 0x00000004
+#define MV_U3D_LINK_CHANGE_WRESET 0x00000008
+#define MV_U3D_LINK_CHANGE_HRESET 0x00000010
+#define MV_U3D_LINK_CHANGE_VBUS_INVALID 0x00000020
+#define MV_U3D_LINK_CHANGE_INACT 0x00000040
+#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0 0x00000080
+#define MV_U3D_LINK_CHANGE_U1 0x00000100
+#define MV_U3D_LINK_CHANGE_U2 0x00000200
+#define MV_U3D_LINK_CHANGE_U3 0x00000400
+
+/* bridge setting */
+#define MV_U3D_BRIDGE_SETTING_VBUS_VALID (1 << 16)
+
+/* Command Register Bit Masks */
+#define MV_U3D_CMD_RUN_STOP 0x00000001
+#define MV_U3D_CMD_CTRL_RESET 0x00000002
+
+/* ep control register */
+#define MV_U3D_EPXCR_EP_TYPE_CONTROL 0
+#define MV_U3D_EPXCR_EP_TYPE_ISOC 1
+#define MV_U3D_EPXCR_EP_TYPE_BULK 2
+#define MV_U3D_EPXCR_EP_TYPE_INT 3
+#define MV_U3D_EPXCR_EP_ENABLE_SHIFT 4
+#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT 12
+#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT 16
+#define MV_U3D_USB_BULK_BURST_OUT 6
+#define MV_U3D_USB_BULK_BURST_IN 14
+
+#define MV_U3D_EPXCR_EP_FLUSH (1 << 7)
+#define MV_U3D_EPXCR_EP_HALT (1 << 1)
+#define MV_U3D_EPXCR_EP_INIT (1)
+
+/* TX/RX Status Register */
+#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT 24
+#define MV_U3D_COMPLETE_INVALID 0
+#define MV_U3D_COMPLETE_SUCCESS 1
+#define MV_U3D_COMPLETE_BUFF_ERR 2
+#define MV_U3D_COMPLETE_SHORT_PACKET 3
+#define MV_U3D_COMPLETE_TRB_ERR 5
+#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK (0xFFFFFF)
+
+#define MV_U3D_USB_LINK_BYPASS_VBUS 0x8
+
+#define MV_U3D_LTSSM_PHY_INIT_DONE 0x80000000
+#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE 0x40000000
+
+#define MV_U3D_USB3_OP_REGS_OFFSET 0x100
+#define MV_U3D_USB3_PHY_OFFSET 0xB800
+
+#define DCS_ENABLE 0x1
+
+/* timeout */
+#define MV_U3D_RESET_TIMEOUT 10000
+#define MV_U3D_FLUSH_TIMEOUT 100000
+#define MV_U3D_OWN_TIMEOUT 10000
+#define LOOPS_USEC_SHIFT 4
+#define LOOPS_USEC (1 << LOOPS_USEC_SHIFT)
+#define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT)
+
+/* ep direction */
+#define MV_U3D_EP_DIR_IN 1
+#define MV_U3D_EP_DIR_OUT 0
+#define mv_u3d_ep_dir(ep) (((ep)->ep_num == 0) ? \
+ ((ep)->u3d->ep0_dir) : ((ep)->direction))
+
+/* usb capability registers */
+struct mv_u3d_cap_regs {
+ u32 rsvd[5];
+ u32 dboff; /* doorbell register offset */
+ u32 rtsoff; /* runtime register offset */
+ u32 vuoff; /* vendor unique register offset */
+};
+
+/* operation registers */
+struct mv_u3d_op_regs {
+ u32 usbcmd; /* Command register */
+ u32 rsvd1[11];
+ u32 dcbaapl; /* Device Context Base Address low register */
+ u32 dcbaaph; /* Device Context Base Address high register */
+ u32 rsvd2[243];
+ u32 portsc; /* port status and control register*/
+ u32 portlinkinfo; /* port link info register*/
+ u32 rsvd3[9917];
+ u32 doorbell; /* doorbell register */
+};
+
+/* control enpoint enable registers */
+struct epxcr {
+ u32 epxoutcr0; /* ep out control 0 register */
+ u32 epxoutcr1; /* ep out control 1 register */
+ u32 epxincr0; /* ep in control 0 register */
+ u32 epxincr1; /* ep in control 1 register */
+};
+
+/* transfer status registers */
+struct xferstatus {
+ u32 curdeqlo; /* current TRB pointer low */
+ u32 curdeqhi; /* current TRB pointer high */
+ u32 statuslo; /* transfer status low */
+ u32 statushi; /* transfer status high */
+};
+
+/* vendor unique control registers */
+struct mv_u3d_vuc_regs {
+ u32 ctrlepenable; /* control endpoint enable register */
+ u32 setuplock; /* setup lock register */
+ u32 endcomplete; /* endpoint transfer complete register */
+ u32 intrcause; /* interrupt cause register */
+ u32 intrenable; /* interrupt enable register */
+ u32 trbcomplete; /* TRB complete register */
+ u32 linkchange; /* link change register */
+ u32 rsvd1[5];
+ u32 trbunderrun; /* TRB underrun register */
+ u32 rsvd2[43];
+ u32 bridgesetting; /* bridge setting register */
+ u32 rsvd3[7];
+ struct xferstatus txst[16]; /* TX status register */
+ struct xferstatus rxst[16]; /* RX status register */
+ u32 ltssm; /* LTSSM control register */
+ u32 pipe; /* PIPE control register */
+ u32 linkcr0; /* link control 0 register */
+ u32 linkcr1; /* link control 1 register */
+ u32 rsvd6[60];
+ u32 mib0; /* MIB0 counter register */
+ u32 usblink; /* usb link control register */
+ u32 ltssmstate; /* LTSSM state register */
+ u32 linkerrorcause; /* link error cause register */
+ u32 rsvd7[60];
+ u32 devaddrtiebrkr; /* device address and tie breaker */
+ u32 itpinfo0; /* ITP info 0 register */
+ u32 itpinfo1; /* ITP info 1 register */
+ u32 rsvd8[61];
+ struct epxcr epcr[16]; /* ep control register */
+ u32 rsvd9[64];
+ u32 phyaddr; /* PHY address register */
+ u32 phydata; /* PHY data register */
+};
+
+/* Endpoint context structure */
+struct mv_u3d_ep_context {
+ u32 rsvd0;
+ u32 rsvd1;
+ u32 trb_addr_lo; /* TRB address low 32 bit */
+ u32 trb_addr_hi; /* TRB address high 32 bit */
+ u32 rsvd2;
+ u32 rsvd3;
+ struct usb_ctrlrequest setup_buffer; /* setup data buffer */
+};
+
+/* TRB control data structure */
+struct mv_u3d_trb_ctrl {
+ u32 own:1; /* owner of TRB */
+ u32 rsvd1:3;
+ u32 chain:1; /* associate this TRB with the
+ next TRB on the Ring */
+ u32 ioc:1; /* interrupt on complete */
+ u32 rsvd2:4;
+ u32 type:6; /* TRB type */
+#define TYPE_NORMAL 1
+#define TYPE_DATA 3
+#define TYPE_LINK 6
+ u32 dir:1; /* Working at data stage of control endpoint
+ operation. 0 is OUT and 1 is IN. */
+ u32 rsvd3:15;
+};
+
+/* TRB data structure
+ * For multiple TRB, all the TRBs' physical address should be continuous.
+ */
+struct mv_u3d_trb_hw {
+ u32 buf_addr_lo; /* data buffer address low 32 bit */
+ u32 buf_addr_hi; /* data buffer address high 32 bit */
+ u32 trb_len; /* transfer length */
+ struct mv_u3d_trb_ctrl ctrl; /* TRB control data */
+};
+
+/* TRB structure */
+struct mv_u3d_trb {
+ struct mv_u3d_trb_hw *trb_hw; /* point to the trb_hw structure */
+ dma_addr_t trb_dma; /* dma address for this trb_hw */
+ struct list_head trb_list; /* trb list */
+};
+
+/* device data structure */
+struct mv_u3d {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ spinlock_t lock; /* device lock */
+ struct completion *done;
+ struct device *dev;
+ int irq;
+
+ /* usb controller registers */
+ struct mv_u3d_cap_regs __iomem *cap_regs;
+ struct mv_u3d_op_regs __iomem *op_regs;
+ struct mv_u3d_vuc_regs __iomem *vuc_regs;
+ void __iomem *phy_regs;
+
+ unsigned int max_eps;
+ struct mv_u3d_ep_context *ep_context;
+ size_t ep_context_size;
+ dma_addr_t ep_context_dma;
+
+ struct dma_pool *trb_pool; /* for TRB data structure */
+ struct mv_u3d_ep *eps;
+
+ struct mv_u3d_req *status_req; /* ep0 status request */
+ struct usb_ctrlrequest local_setup_buff; /* store setup data*/
+
+ unsigned int resume_state; /* USB state to resume */
+ unsigned int usb_state; /* USB current state */
+ unsigned int ep0_state; /* Endpoint zero state */
+ unsigned int ep0_dir;
+
+ unsigned int dev_addr; /* device address */
+
+ unsigned int errors;
+
+ unsigned softconnect:1;
+ unsigned vbus_active:1; /* vbus is active or not */
+ unsigned remote_wakeup:1; /* support remote wakeup */
+ unsigned clock_gating:1; /* clock gating or not */
+ unsigned active:1; /* udc is active or not */
+ unsigned vbus_valid_detect:1; /* udc vbus detection */
+
+ struct mv_usb_addon_irq *vbus;
+ unsigned int power;
+
+ struct clk *clk;
+};
+
+/* endpoint data structure */
+struct mv_u3d_ep {
+ struct usb_ep ep;
+ struct mv_u3d *u3d;
+ struct list_head queue; /* ep request queued hardware */
+ struct list_head req_list; /* list of ep request */
+ struct mv_u3d_ep_context *ep_context; /* ep context */
+ u32 direction;
+ char name[14];
+ u32 processing; /* there is ep request
+ queued on haredware */
+ spinlock_t req_lock; /* ep lock */
+ unsigned wedge:1;
+ unsigned enabled:1;
+ unsigned ep_type:2;
+ unsigned ep_num:8;
+};
+
+/* request data structure */
+struct mv_u3d_req {
+ struct usb_request req;
+ struct mv_u3d_ep *ep;
+ struct list_head queue; /* ep requst queued on hardware */
+ struct list_head list; /* ep request list */
+ struct list_head trb_list; /* trb list of a request */
+
+ struct mv_u3d_trb *trb_head; /* point to first trb of a request */
+ unsigned trb_count; /* TRB number in the chain */
+ unsigned chain; /* TRB chain or not */
+};
+
+#endif
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
new file mode 100644
index 0000000..8cfd5b0
--- /dev/null
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -0,0 +1,2098 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/mv_usb.h>
+#include <linux/clk.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+#include "mv_u3d.h"
+
+#define DRIVER_DESC "Marvell PXA USB3.0 Device Controller driver"
+
+static const char driver_name[] = "mv_u3d";
+static const char driver_desc[] = DRIVER_DESC;
+
+static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status);
+static void mv_u3d_stop_activity(struct mv_u3d *u3d,
+ struct usb_gadget_driver *driver);
+
+/* for endpoint 0 operations */
+static const struct usb_endpoint_descriptor mv_u3d_ep0_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+ .wMaxPacketSize = MV_U3D_EP0_MAX_PKT_SIZE,
+};
+
+static void mv_u3d_ep0_reset(struct mv_u3d *u3d)
+{
+ struct mv_u3d_ep *ep;
+ u32 epxcr;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ ep = &u3d->eps[i];
+ ep->u3d = u3d;
+
+ /* ep0 ep context, ep0 in and out share the same ep context */
+ ep->ep_context = &u3d->ep_context[1];
+ }
+
+ /* reset ep state machine */
+ /* reset ep0 out */
+ epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+ epxcr |= MV_U3D_EPXCR_EP_INIT;
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
+ udelay(5);
+ epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
+
+ epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
+ << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+ | (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+ | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+ | MV_U3D_EPXCR_EP_TYPE_CONTROL);
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr1);
+
+ /* reset ep0 in */
+ epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+ epxcr |= MV_U3D_EPXCR_EP_INIT;
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
+ udelay(5);
+ epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
+
+ epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
+ << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+ | (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+ | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+ | MV_U3D_EPXCR_EP_TYPE_CONTROL);
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr1);
+}
+
+static void mv_u3d_ep0_stall(struct mv_u3d *u3d)
+{
+ u32 tmp;
+ dev_dbg(u3d->dev, "%s\n", __func__);
+
+ /* set TX and RX to stall */
+ tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+ tmp |= MV_U3D_EPXCR_EP_HALT;
+ iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+
+ tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+ tmp |= MV_U3D_EPXCR_EP_HALT;
+ iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+
+ /* update ep0 state */
+ u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+ u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+}
+
+static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
+ struct mv_u3d_req *curr_req)
+{
+ struct mv_u3d_trb *curr_trb;
+ dma_addr_t cur_deq_lo;
+ struct mv_u3d_ep_context *curr_ep_context;
+ int trb_complete, actual, remaining_length;
+ int direction, ep_num;
+ int retval = 0;
+ u32 tmp, status, length;
+
+ curr_ep_context = &u3d->ep_context[index];
+ direction = index % 2;
+ ep_num = index / 2;
+
+ trb_complete = 0;
+ actual = curr_req->req.length;
+
+ while (!list_empty(&curr_req->trb_list)) {
+ curr_trb = list_entry(curr_req->trb_list.next,
+ struct mv_u3d_trb, trb_list);
+ if (!curr_trb->trb_hw->ctrl.own) {
+ dev_err(u3d->dev, "%s, TRB own error!\n",
+ u3d->eps[index].name);
+ return 1;
+ }
+
+ curr_trb->trb_hw->ctrl.own = 0;
+ if (direction == MV_U3D_EP_DIR_OUT) {
+ tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo);
+ cur_deq_lo =
+ ioread32(&u3d->vuc_regs->rxst[ep_num].curdeqlo);
+ } else {
+ tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo);
+ cur_deq_lo =
+ ioread32(&u3d->vuc_regs->txst[ep_num].curdeqlo);
+ }
+
+ status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT;
+ length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK;
+
+ if (status == MV_U3D_COMPLETE_SUCCESS ||
+ (status == MV_U3D_COMPLETE_SHORT_PACKET &&
+ direction == MV_U3D_EP_DIR_OUT)) {
+ remaining_length += length;
+ actual -= remaining_length;
+ } else {
+ dev_err(u3d->dev,
+ "complete_tr error: ep=%d %s: error = 0x%x\n",
+ index >> 1, direction ? "SEND" : "RECV",
+ status);
+ retval = -EPROTO;
+ }
+
+ list_del_init(&curr_trb->trb_list);
+ }
+ if (retval)
+ return retval;
+
+ curr_req->req.actual = actual;
+ return 0;
+}
+
+/*
+ * mv_u3d_done() - retire a request; caller blocked irqs
+ * @status : request status to be set, only works when
+ * request is still in progress.
+ */
+static
+void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status)
+{
+ struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d;
+
+ dev_dbg(u3d->dev, "mv_u3d_done: remove req->queue\n");
+ /* Removed the req from ep queue */
+ list_del_init(&req->queue);
+
+ /* req.status should be set as -EINPROGRESS in ep_queue() */
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ /* Free trb for the request */
+ if (!req->chain)
+ dma_pool_free(u3d->trb_pool,
+ req->trb_head->trb_hw, req->trb_head->trb_dma);
+ else {
+ dma_unmap_single(ep->u3d->gadget.dev.parent,
+ (dma_addr_t)req->trb_head->trb_dma,
+ req->trb_count * sizeof(struct mv_u3d_trb_hw),
+ DMA_BIDIRECTIONAL);
+ kfree(req->trb_head->trb_hw);
+ }
+ kfree(req->trb_head);
+
+ usb_gadget_unmap_request(&u3d->gadget, &req->req, mv_u3d_ep_dir(ep));
+
+ if (status && (status != -ESHUTDOWN)) {
+ dev_dbg(u3d->dev, "complete %s req %p stat %d len %u/%u",
+ ep->ep.name, &req->req, status,
+ req->req.actual, req->req.length);
+ }
+
+ spin_unlock(&ep->u3d->lock);
+ /*
+ * complete() is from gadget layer,
+ * eg fsg->bulk_in_complete()
+ */
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+
+ spin_lock(&ep->u3d->lock);
+}
+
+static int mv_u3d_queue_trb(struct mv_u3d_ep *ep, struct mv_u3d_req *req)
+{
+ u32 tmp, direction;
+ struct mv_u3d *u3d;
+ struct mv_u3d_ep_context *ep_context;
+ int retval = 0;
+
+ u3d = ep->u3d;
+ direction = mv_u3d_ep_dir(ep);
+
+ /* ep0 in and out share the same ep context slot 1*/
+ if (ep->ep_num == 0)
+ ep_context = &(u3d->ep_context[1]);
+ else
+ ep_context = &(u3d->ep_context[ep->ep_num * 2 + direction]);
+
+ /* check if the pipe is empty or not */
+ if (!list_empty(&ep->queue)) {
+ dev_err(u3d->dev, "add trb to non-empty queue!\n");
+ retval = -ENOMEM;
+ WARN_ON(1);
+ } else {
+ ep_context->rsvd0 = cpu_to_le32(1);
+ ep_context->rsvd1 = 0;
+
+ /* Configure the trb address and set the DCS bit.
+ * Both DCS bit and own bit in trb should be set.
+ */
+ ep_context->trb_addr_lo =
+ cpu_to_le32(req->trb_head->trb_dma | DCS_ENABLE);
+ ep_context->trb_addr_hi = 0;
+
+ /* Ensure that updates to the EP Context will
+ * occure before Ring Bell.
+ */
+ wmb();
+
+ /* ring bell the ep */
+ if (ep->ep_num == 0)
+ tmp = 0x1;
+ else
+ tmp = ep->ep_num * 2
+ + ((direction == MV_U3D_EP_DIR_OUT) ? 0 : 1);
+
+ iowrite32(tmp, &u3d->op_regs->doorbell);
+ }
+ return retval;
+}
+
+static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req,
+ unsigned *length, dma_addr_t *dma)
+{
+ u32 temp;
+ unsigned int direction;
+ struct mv_u3d_trb *trb;
+ struct mv_u3d_trb_hw *trb_hw;
+ struct mv_u3d *u3d;
+
+ /* how big will this transfer be? */
+ *length = req->req.length - req->req.actual;
+ BUG_ON(*length > (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
+
+ u3d = req->ep->u3d;
+
+ trb = kzalloc(sizeof(*trb), GFP_ATOMIC);
+ if (!trb) {
+ dev_err(u3d->dev, "%s, trb alloc fail\n", __func__);
+ return NULL;
+ }
+
+ /*
+ * Be careful that no _GFP_HIGHMEM is set,
+ * or we can not use dma_to_virt
+ * cannot use GFP_KERNEL in spin lock
+ */
+ trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma);
+ if (!trb_hw) {
+ dev_err(u3d->dev,
+ "%s, dma_pool_alloc fail\n", __func__);
+ return NULL;
+ }
+ trb->trb_dma = *dma;
+ trb->trb_hw = trb_hw;
+
+ /* initialize buffer page pointers */
+ temp = (u32)(req->req.dma + req->req.actual);
+
+ trb_hw->buf_addr_lo = cpu_to_le32(temp);
+ trb_hw->buf_addr_hi = 0;
+ trb_hw->trb_len = cpu_to_le32(*length);
+ trb_hw->ctrl.own = 1;
+
+ if (req->ep->ep_num == 0)
+ trb_hw->ctrl.type = TYPE_DATA;
+ else
+ trb_hw->ctrl.type = TYPE_NORMAL;
+
+ req->req.actual += *length;
+
+ direction = mv_u3d_ep_dir(req->ep);
+ if (direction == MV_U3D_EP_DIR_IN)
+ trb_hw->ctrl.dir = 1;
+ else
+ trb_hw->ctrl.dir = 0;
+
+ /* Enable interrupt for the last trb of a request */
+ if (!req->req.no_interrupt)
+ trb_hw->ctrl.ioc = 1;
+
+ trb_hw->ctrl.chain = 0;
+
+ wmb();
+ return trb;
+}
+
+static int mv_u3d_build_trb_chain(struct mv_u3d_req *req, unsigned *length,
+ struct mv_u3d_trb *trb, int *is_last)
+{
+ u32 temp;
+ unsigned int direction;
+ struct mv_u3d *u3d;
+
+ /* how big will this transfer be? */
+ *length = min(req->req.length - req->req.actual,
+ (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
+
+ u3d = req->ep->u3d;
+
+ trb->trb_dma = 0;
+
+ /* initialize buffer page pointers */
+ temp = (u32)(req->req.dma + req->req.actual);
+
+ trb->trb_hw->buf_addr_lo = cpu_to_le32(temp);
+ trb->trb_hw->buf_addr_hi = 0;
+ trb->trb_hw->trb_len = cpu_to_le32(*length);
+ trb->trb_hw->ctrl.own = 1;
+
+ if (req->ep->ep_num == 0)
+ trb->trb_hw->ctrl.type = TYPE_DATA;
+ else
+ trb->trb_hw->ctrl.type = TYPE_NORMAL;
+
+ req->req.actual += *length;
+
+ direction = mv_u3d_ep_dir(req->ep);
+ if (direction == MV_U3D_EP_DIR_IN)
+ trb->trb_hw->ctrl.dir = 1;
+ else
+ trb->trb_hw->ctrl.dir = 0;
+
+ /* zlp is needed if req->req.zero is set */
+ if (req->req.zero) {
+ if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+ *is_last = 1;
+ else
+ *is_last = 0;
+ } else if (req->req.length == req->req.actual)
+ *is_last = 1;
+ else
+ *is_last = 0;
+
+ /* Enable interrupt for the last trb of a request */
+ if (*is_last && !req->req.no_interrupt)
+ trb->trb_hw->ctrl.ioc = 1;
+
+ if (*is_last)
+ trb->trb_hw->ctrl.chain = 0;
+ else {
+ trb->trb_hw->ctrl.chain = 1;
+ dev_dbg(u3d->dev, "chain trb\n");
+ }
+
+ wmb();
+
+ return 0;
+}
+
+/* generate TRB linked list for a request
+ * usb controller only supports continous trb chain,
+ * that trb structure physical address should be continous.
+ */
+static int mv_u3d_req_to_trb(struct mv_u3d_req *req)
+{
+ unsigned count;
+ int is_last;
+ struct mv_u3d_trb *trb;
+ struct mv_u3d_trb_hw *trb_hw;
+ struct mv_u3d *u3d;
+ dma_addr_t dma;
+ unsigned length;
+ unsigned trb_num;
+
+ u3d = req->ep->u3d;
+
+ INIT_LIST_HEAD(&req->trb_list);
+
+ length = req->req.length - req->req.actual;
+ /* normally the request transfer length is less than 16KB.
+ * we use buil_trb_one() to optimize it.
+ */
+ if (length <= (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER) {
+ trb = mv_u3d_build_trb_one(req, &count, &dma);
+ list_add_tail(&trb->trb_list, &req->trb_list);
+ req->trb_head = trb;
+ req->trb_count = 1;
+ req->chain = 0;
+ } else {
+ trb_num = length / MV_U3D_EP_MAX_LENGTH_TRANSFER;
+ if (length % MV_U3D_EP_MAX_LENGTH_TRANSFER)
+ trb_num++;
+
+ trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC);
+ if (!trb) {
+ dev_err(u3d->dev,
+ "%s, trb alloc fail\n", __func__);
+ return -ENOMEM;
+ }
+
+ trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC);
+ if (!trb_hw) {
+ dev_err(u3d->dev,
+ "%s, trb_hw alloc fail\n", __func__);
+ return -ENOMEM;
+ }
+
+ do {
+ trb->trb_hw = trb_hw;
+ if (mv_u3d_build_trb_chain(req, &count,
+ trb, &is_last)) {
+ dev_err(u3d->dev,
+ "%s, mv_u3d_build_trb_chain fail\n",
+ __func__);
+ return -EIO;
+ }
+
+ list_add_tail(&trb->trb_list, &req->trb_list);
+ req->trb_count++;
+ trb++;
+ trb_hw++;
+ } while (!is_last);
+
+ req->trb_head = list_entry(req->trb_list.next,
+ struct mv_u3d_trb, trb_list);
+ req->trb_head->trb_dma = dma_map_single(u3d->gadget.dev.parent,
+ req->trb_head->trb_hw,
+ trb_num * sizeof(*trb_hw),
+ DMA_BIDIRECTIONAL);
+
+ req->chain = 1;
+ }
+
+ return 0;
+}
+
+static int
+mv_u3d_start_queue(struct mv_u3d_ep *ep)
+{
+ struct mv_u3d *u3d = ep->u3d;
+ struct mv_u3d_req *req;
+ int ret;
+
+ if (!list_empty(&ep->req_list) && !ep->processing)
+ req = list_entry(ep->req_list.next, struct mv_u3d_req, list);
+ else
+ return 0;
+
+ ep->processing = 1;
+
+ /* set up dma mapping */
+ ret = usb_gadget_map_request(&u3d->gadget, &req->req,
+ mv_u3d_ep_dir(ep));
+ if (ret)
+ return ret;
+
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+ req->trb_count = 0;
+
+ /* build trbs and push them to device queue */
+ if (!mv_u3d_req_to_trb(req)) {
+ ret = mv_u3d_queue_trb(ep, req);
+ if (ret) {
+ ep->processing = 0;
+ return ret;
+ }
+ } else {
+ ep->processing = 0;
+ dev_err(u3d->dev, "%s, mv_u3d_req_to_trb fail\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* irq handler advances the queue */
+ if (req)
+ list_add_tail(&req->queue, &ep->queue);
+
+ return 0;
+}
+
+static int mv_u3d_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct mv_u3d *u3d;
+ struct mv_u3d_ep *ep;
+ struct mv_u3d_ep_context *ep_context;
+ u16 max = 0;
+ unsigned maxburst = 0;
+ u32 epxcr, direction;
+
+ if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT)
+ return -EINVAL;
+
+ ep = container_of(_ep, struct mv_u3d_ep, ep);
+ u3d = ep->u3d;
+
+ if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ direction = mv_u3d_ep_dir(ep);
+ max = le16_to_cpu(desc->wMaxPacketSize);
+
+ if (!_ep->maxburst)
+ _ep->maxburst = 1;
+ maxburst = _ep->maxburst;
+
+ /* Get the endpoint context address */
+ ep_context = (struct mv_u3d_ep_context *)ep->ep_context;
+
+ /* Set the max burst size */
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_BULK:
+ if (maxburst > 16) {
+ dev_dbg(u3d->dev,
+ "max burst should not be greater "
+ "than 16 on bulk ep\n");
+ maxburst = 1;
+ _ep->maxburst = maxburst;
+ }
+ dev_dbg(u3d->dev,
+ "maxburst: %d on bulk %s\n", maxburst, ep->name);
+ break;
+ case USB_ENDPOINT_XFER_CONTROL:
+ /* control transfer only supports maxburst as one */
+ maxburst = 1;
+ _ep->maxburst = maxburst;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (maxburst != 1) {
+ dev_dbg(u3d->dev,
+ "max burst should be 1 on int ep "
+ "if transfer size is not 1024\n");
+ maxburst = 1;
+ _ep->maxburst = maxburst;
+ }
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (maxburst != 1) {
+ dev_dbg(u3d->dev,
+ "max burst should be 1 on isoc ep "
+ "if transfer size is not 1024\n");
+ maxburst = 1;
+ _ep->maxburst = maxburst;
+ }
+ break;
+ default:
+ goto en_done;
+ }
+
+ ep->ep.maxpacket = max;
+ ep->ep.desc = desc;
+ ep->enabled = 1;
+
+ /* Enable the endpoint for Rx or Tx and set the endpoint type */
+ if (direction == MV_U3D_EP_DIR_OUT) {
+ epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+ epxcr |= MV_U3D_EPXCR_EP_INIT;
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+ udelay(5);
+ epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+
+ epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+ | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+ | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+ | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+ } else {
+ epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+ epxcr |= MV_U3D_EPXCR_EP_INIT;
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+ udelay(5);
+ epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+
+ epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+ | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+ | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+ | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+ }
+
+ return 0;
+en_done:
+ return -EINVAL;
+}
+
+static int mv_u3d_ep_disable(struct usb_ep *_ep)
+{
+ struct mv_u3d *u3d;
+ struct mv_u3d_ep *ep;
+ struct mv_u3d_ep_context *ep_context;
+ u32 epxcr, direction;
+
+ if (!_ep)
+ return -EINVAL;
+
+ ep = container_of(_ep, struct mv_u3d_ep, ep);
+ if (!ep->ep.desc)
+ return -EINVAL;
+
+ u3d = ep->u3d;
+
+ /* Get the endpoint context address */
+ ep_context = ep->ep_context;
+
+ direction = mv_u3d_ep_dir(ep);
+
+ /* nuke all pending requests (does flush) */
+ mv_u3d_nuke(ep, -ESHUTDOWN);
+
+ /* Disable the endpoint for Rx or Tx and reset the endpoint type */
+ if (direction == MV_U3D_EP_DIR_OUT) {
+ epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+ epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+ | USB_ENDPOINT_XFERTYPE_MASK);
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+ } else {
+ epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+ epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+ | USB_ENDPOINT_XFERTYPE_MASK);
+ iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+ }
+
+ ep->enabled = 0;
+
+ ep->ep.desc = NULL;
+ return 0;
+}
+
+static struct usb_request *
+mv_u3d_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+ struct mv_u3d_req *req = NULL;
+
+ req = kzalloc(sizeof *req, gfp_flags);
+ if (!req)
+ return NULL;
+
+ INIT_LIST_HEAD(&req->queue);
+
+ return &req->req;
+}
+
+static void mv_u3d_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct mv_u3d_req *req = container_of(_req, struct mv_u3d_req, req);
+
+ kfree(req);
+}
+
+static void mv_u3d_ep_fifo_flush(struct usb_ep *_ep)
+{
+ struct mv_u3d *u3d;
+ u32 direction;
+ struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep);
+ unsigned int loops;
+ u32 tmp;
+
+ /* if endpoint is not enabled, cannot flush endpoint */
+ if (!ep->enabled)
+ return;
+
+ u3d = ep->u3d;
+ direction = mv_u3d_ep_dir(ep);
+
+ /* ep0 need clear bit after flushing fifo. */
+ if (!ep->ep_num) {
+ if (direction == MV_U3D_EP_DIR_OUT) {
+ tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+ tmp |= MV_U3D_EPXCR_EP_FLUSH;
+ iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+ udelay(10);
+ tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
+ iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+ } else {
+ tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+ tmp |= MV_U3D_EPXCR_EP_FLUSH;
+ iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+ udelay(10);
+ tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
+ iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+ }
+ return;
+ }
+
+ if (direction == MV_U3D_EP_DIR_OUT) {
+ tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+ tmp |= MV_U3D_EPXCR_EP_FLUSH;
+ iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+
+ /* Wait until flushing completed */
+ loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
+ while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0) &
+ MV_U3D_EPXCR_EP_FLUSH) {
+ /*
+ * EP_FLUSH bit should be cleared to indicate this
+ * operation is complete
+ */
+ if (loops == 0) {
+ dev_dbg(u3d->dev,
+ "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
+ direction ? "in" : "out");
+ return;
+ }
+ loops--;
+ udelay(LOOPS_USEC);
+ }
+ } else { /* EP_DIR_IN */
+ tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+ tmp |= MV_U3D_EPXCR_EP_FLUSH;
+ iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+
+ /* Wait until flushing completed */
+ loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
+ while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0) &
+ MV_U3D_EPXCR_EP_FLUSH) {
+ /*
+ * EP_FLUSH bit should be cleared to indicate this
+ * operation is complete
+ */
+ if (loops == 0) {
+ dev_dbg(u3d->dev,
+ "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
+ direction ? "in" : "out");
+ return;
+ }
+ loops--;
+ udelay(LOOPS_USEC);
+ }
+ }
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int
+mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+ struct mv_u3d_ep *ep;
+ struct mv_u3d_req *req;
+ struct mv_u3d *u3d;
+ unsigned long flags;
+ int is_first_req = 0;
+
+ if (unlikely(!_ep || !_req))
+ return -EINVAL;
+
+ ep = container_of(_ep, struct mv_u3d_ep, ep);
+ u3d = ep->u3d;
+
+ req = container_of(_req, struct mv_u3d_req, req);
+
+ if (!ep->ep_num
+ && u3d->ep0_state == MV_U3D_STATUS_STAGE
+ && !_req->length) {
+ dev_dbg(u3d->dev, "ep0 status stage\n");
+ u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+ return 0;
+ }
+
+ dev_dbg(u3d->dev, "%s: %s, req: 0x%x\n",
+ __func__, _ep->name, (u32)req);
+
+ /* catch various bogus parameters */
+ if (!req->req.complete || !req->req.buf
+ || !list_empty(&req->queue)) {
+ dev_err(u3d->dev,
+ "%s, bad params, _req: 0x%x,"
+ "req->req.complete: 0x%x, req->req.buf: 0x%x,"
+ "list_empty: 0x%x\n",
+ __func__, (u32)_req,
+ (u32)req->req.complete, (u32)req->req.buf,
+ (u32)list_empty(&req->queue));
+ return -EINVAL;
+ }
+ if (unlikely(!ep->ep.desc)) {
+ dev_err(u3d->dev, "%s, bad ep\n", __func__);
+ return -EINVAL;
+ }
+ if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ if (req->req.length > ep->ep.maxpacket)
+ return -EMSGSIZE;
+ }
+
+ if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) {
+ dev_err(u3d->dev,
+ "bad params of driver/speed\n");
+ return -ESHUTDOWN;
+ }
+
+ req->ep = ep;
+
+ /* Software list handles usb request. */
+ spin_lock_irqsave(&ep->req_lock, flags);
+ is_first_req = list_empty(&ep->req_list);
+ list_add_tail(&req->list, &ep->req_list);
+ spin_unlock_irqrestore(&ep->req_lock, flags);
+ if (!is_first_req) {
+ dev_dbg(u3d->dev, "list is not empty\n");
+ return 0;
+ }
+
+ dev_dbg(u3d->dev, "call mv_u3d_start_queue from usb_ep_queue\n");
+ spin_lock_irqsave(&u3d->lock, flags);
+ mv_u3d_start_queue(ep);
+ spin_unlock_irqrestore(&u3d->lock, flags);
+ return 0;
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct mv_u3d_ep *ep;
+ struct mv_u3d_req *req;
+ struct mv_u3d *u3d;
+ struct mv_u3d_ep_context *ep_context;
+ struct mv_u3d_req *next_req;
+
+ unsigned long flags;
+ int ret = 0;
+
+ if (!_ep || !_req)
+ return -EINVAL;
+
+ ep = container_of(_ep, struct mv_u3d_ep, ep);
+ u3d = ep->u3d;
+
+ spin_lock_irqsave(&ep->u3d->lock, flags);
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+ if (&req->req != _req) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* The request is in progress, or completed but not dequeued */
+ if (ep->queue.next == &req->queue) {
+ _req->status = -ECONNRESET;
+ mv_u3d_ep_fifo_flush(_ep);
+
+ /* The request isn't the last request in this ep queue */
+ if (req->queue.next != &ep->queue) {
+ dev_dbg(u3d->dev,
+ "it is the last request in this ep queue\n");
+ ep_context = ep->ep_context;
+ next_req = list_entry(req->queue.next,
+ struct mv_u3d_req, queue);
+
+ /* Point first TRB of next request to the EP context. */
+ iowrite32((u32) next_req->trb_head,
+ &ep_context->trb_addr_lo);
+ } else {
+ struct mv_u3d_ep_context *ep_context;
+ ep_context = ep->ep_context;
+ ep_context->trb_addr_lo = 0;
+ ep_context->trb_addr_hi = 0;
+ }
+
+ } else
+ WARN_ON(1);
+
+ mv_u3d_done(ep, req, -ECONNRESET);
+
+ /* remove the req from the ep req list */
+ if (!list_empty(&ep->req_list)) {
+ struct mv_u3d_req *curr_req;
+ curr_req = list_entry(ep->req_list.next,
+ struct mv_u3d_req, list);
+ if (curr_req == req) {
+ list_del_init(&req->list);
+ ep->processing = 0;
+ }
+ }
+
+out:
+ spin_unlock_irqrestore(&ep->u3d->lock, flags);
+ return ret;
+}
+
+static void
+mv_u3d_ep_set_stall(struct mv_u3d *u3d, u8 ep_num, u8 direction, int stall)
+{
+ u32 tmp;
+ struct mv_u3d_ep *ep = u3d->eps;
+
+ dev_dbg(u3d->dev, "%s\n", __func__);
+ if (direction == MV_U3D_EP_DIR_OUT) {
+ tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+ if (stall)
+ tmp |= MV_U3D_EPXCR_EP_HALT;
+ else
+ tmp &= ~MV_U3D_EPXCR_EP_HALT;
+ iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+ } else {
+ tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+ if (stall)
+ tmp |= MV_U3D_EPXCR_EP_HALT;
+ else
+ tmp &= ~MV_U3D_EPXCR_EP_HALT;
+ iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+ }
+}
+
+static int mv_u3d_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
+{
+ struct mv_u3d_ep *ep;
+ unsigned long flags = 0;
+ int status = 0;
+ struct mv_u3d *u3d;
+
+ ep = container_of(_ep, struct mv_u3d_ep, ep);
+ u3d = ep->u3d;
+ if (!ep->ep.desc) {
+ status = -EINVAL;
+ goto out;
+ }
+
+ if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ status = -EOPNOTSUPP;
+ goto out;
+ }
+
+ /*
+ * Attempt to halt IN ep will fail if any transfer requests
+ * are still queue
+ */
+ if (halt && (mv_u3d_ep_dir(ep) == MV_U3D_EP_DIR_IN)
+ && !list_empty(&ep->queue)) {
+ status = -EAGAIN;
+ goto out;
+ }
+
+ spin_lock_irqsave(&ep->u3d->lock, flags);
+ mv_u3d_ep_set_stall(u3d, ep->ep_num, mv_u3d_ep_dir(ep), halt);
+ if (halt && wedge)
+ ep->wedge = 1;
+ else if (!halt)
+ ep->wedge = 0;
+ spin_unlock_irqrestore(&ep->u3d->lock, flags);
+
+ if (ep->ep_num == 0)
+ u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+out:
+ return status;
+}
+
+static int mv_u3d_ep_set_halt(struct usb_ep *_ep, int halt)
+{
+ return mv_u3d_ep_set_halt_wedge(_ep, halt, 0);
+}
+
+static int mv_u3d_ep_set_wedge(struct usb_ep *_ep)
+{
+ return mv_u3d_ep_set_halt_wedge(_ep, 1, 1);
+}
+
+static struct usb_ep_ops mv_u3d_ep_ops = {
+ .enable = mv_u3d_ep_enable,
+ .disable = mv_u3d_ep_disable,
+
+ .alloc_request = mv_u3d_alloc_request,
+ .free_request = mv_u3d_free_request,
+
+ .queue = mv_u3d_ep_queue,
+ .dequeue = mv_u3d_ep_dequeue,
+
+ .set_wedge = mv_u3d_ep_set_wedge,
+ .set_halt = mv_u3d_ep_set_halt,
+ .fifo_flush = mv_u3d_ep_fifo_flush,
+};
+
+static void mv_u3d_controller_stop(struct mv_u3d *u3d)
+{
+ u32 tmp;
+
+ if (!u3d->clock_gating && u3d->vbus_valid_detect)
+ iowrite32(MV_U3D_INTR_ENABLE_VBUS_VALID,
+ &u3d->vuc_regs->intrenable);
+ else
+ iowrite32(0, &u3d->vuc_regs->intrenable);
+ iowrite32(~0x0, &u3d->vuc_regs->endcomplete);
+ iowrite32(~0x0, &u3d->vuc_regs->trbunderrun);
+ iowrite32(~0x0, &u3d->vuc_regs->trbcomplete);
+ iowrite32(~0x0, &u3d->vuc_regs->linkchange);
+ iowrite32(0x1, &u3d->vuc_regs->setuplock);
+
+ /* Reset the RUN bit in the command register to stop USB */
+ tmp = ioread32(&u3d->op_regs->usbcmd);
+ tmp &= ~MV_U3D_CMD_RUN_STOP;
+ iowrite32(tmp, &u3d->op_regs->usbcmd);
+ dev_dbg(u3d->dev, "after u3d_stop, USBCMD 0x%x\n",
+ ioread32(&u3d->op_regs->usbcmd));
+}
+
+static void mv_u3d_controller_start(struct mv_u3d *u3d)
+{
+ u32 usbintr;
+ u32 temp;
+
+ /* enable link LTSSM state machine */
+ temp = ioread32(&u3d->vuc_regs->ltssm);
+ temp |= MV_U3D_LTSSM_PHY_INIT_DONE;
+ iowrite32(temp, &u3d->vuc_regs->ltssm);
+
+ /* Enable interrupts */
+ usbintr = MV_U3D_INTR_ENABLE_LINK_CHG | MV_U3D_INTR_ENABLE_TXDESC_ERR |
+ MV_U3D_INTR_ENABLE_RXDESC_ERR | MV_U3D_INTR_ENABLE_TX_COMPLETE |
+ MV_U3D_INTR_ENABLE_RX_COMPLETE | MV_U3D_INTR_ENABLE_SETUP |
+ (u3d->vbus_valid_detect ? MV_U3D_INTR_ENABLE_VBUS_VALID : 0);
+ iowrite32(usbintr, &u3d->vuc_regs->intrenable);
+
+ /* Enable ctrl ep */
+ iowrite32(0x1, &u3d->vuc_regs->ctrlepenable);
+
+ /* Set the Run bit in the command register */
+ iowrite32(MV_U3D_CMD_RUN_STOP, &u3d->op_regs->usbcmd);
+ dev_dbg(u3d->dev, "after u3d_start, USBCMD 0x%x\n",
+ ioread32(&u3d->op_regs->usbcmd));
+}
+
+static int mv_u3d_controller_reset(struct mv_u3d *u3d)
+{
+ unsigned int loops;
+ u32 tmp;
+
+ /* Stop the controller */
+ tmp = ioread32(&u3d->op_regs->usbcmd);
+ tmp &= ~MV_U3D_CMD_RUN_STOP;
+ iowrite32(tmp, &u3d->op_regs->usbcmd);
+
+ /* Reset the controller to get default values */
+ iowrite32(MV_U3D_CMD_CTRL_RESET, &u3d->op_regs->usbcmd);
+
+ /* wait for reset to complete */
+ loops = LOOPS(MV_U3D_RESET_TIMEOUT);
+ while (ioread32(&u3d->op_regs->usbcmd) & MV_U3D_CMD_CTRL_RESET) {
+ if (loops == 0) {
+ dev_err(u3d->dev,
+ "Wait for RESET completed TIMEOUT\n");
+ return -ETIMEDOUT;
+ }
+ loops--;
+ udelay(LOOPS_USEC);
+ }
+
+ /* Configure the Endpoint Context Address */
+ iowrite32(u3d->ep_context_dma, &u3d->op_regs->dcbaapl);
+ iowrite32(0, &u3d->op_regs->dcbaaph);
+
+ return 0;
+}
+
+static int mv_u3d_enable(struct mv_u3d *u3d)
+{
+ struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+ int retval;
+
+ if (u3d->active)
+ return 0;
+
+ if (!u3d->clock_gating) {
+ u3d->active = 1;
+ return 0;
+ }
+
+ dev_dbg(u3d->dev, "enable u3d\n");
+ clk_enable(u3d->clk);
+ if (pdata->phy_init) {
+ retval = pdata->phy_init(u3d->phy_regs);
+ if (retval) {
+ dev_err(u3d->dev,
+ "init phy error %d\n", retval);
+ clk_disable(u3d->clk);
+ return retval;
+ }
+ }
+ u3d->active = 1;
+
+ return 0;
+}
+
+static void mv_u3d_disable(struct mv_u3d *u3d)
+{
+ struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+ if (u3d->clock_gating && u3d->active) {
+ dev_dbg(u3d->dev, "disable u3d\n");
+ if (pdata->phy_deinit)
+ pdata->phy_deinit(u3d->phy_regs);
+ clk_disable(u3d->clk);
+ u3d->active = 0;
+ }
+}
+
+static int mv_u3d_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+ struct mv_u3d *u3d;
+ unsigned long flags;
+ int retval = 0;
+
+ u3d = container_of(gadget, struct mv_u3d, gadget);
+
+ spin_lock_irqsave(&u3d->lock, flags);
+
+ u3d->vbus_active = (is_active != 0);
+ dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
+ __func__, u3d->softconnect, u3d->vbus_active);
+ /*
+ * 1. external VBUS detect: we can disable/enable clock on demand.
+ * 2. UDC VBUS detect: we have to enable clock all the time.
+ * 3. No VBUS detect: we have to enable clock all the time.
+ */
+ if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
+ retval = mv_u3d_enable(u3d);
+ if (retval == 0) {
+ /*
+ * after clock is disabled, we lost all the register
+ * context. We have to re-init registers
+ */
+ mv_u3d_controller_reset(u3d);
+ mv_u3d_ep0_reset(u3d);
+ mv_u3d_controller_start(u3d);
+ }
+ } else if (u3d->driver && u3d->softconnect) {
+ if (!u3d->active)
+ goto out;
+
+ /* stop all the transfer in queue*/
+ mv_u3d_stop_activity(u3d, u3d->driver);
+ mv_u3d_controller_stop(u3d);
+ mv_u3d_disable(u3d);
+ }
+
+out:
+ spin_unlock_irqrestore(&u3d->lock, flags);
+ return retval;
+}
+
+/* constrain controller's VBUS power usage
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume. For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static int mv_u3d_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+ struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
+
+ u3d->power = mA;
+
+ return 0;
+}
+
+static int mv_u3d_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
+ unsigned long flags;
+ int retval = 0;
+
+ spin_lock_irqsave(&u3d->lock, flags);
+
+ dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
+ __func__, u3d->softconnect, u3d->vbus_active);
+ u3d->softconnect = (is_on != 0);
+ if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
+ retval = mv_u3d_enable(u3d);
+ if (retval == 0) {
+ /*
+ * after clock is disabled, we lost all the register
+ * context. We have to re-init registers
+ */
+ mv_u3d_controller_reset(u3d);
+ mv_u3d_ep0_reset(u3d);
+ mv_u3d_controller_start(u3d);
+ }
+ } else if (u3d->driver && u3d->vbus_active) {
+ /* stop all the transfer in queue*/
+ mv_u3d_stop_activity(u3d, u3d->driver);
+ mv_u3d_controller_stop(u3d);
+ mv_u3d_disable(u3d);
+ }
+
+ spin_unlock_irqrestore(&u3d->lock, flags);
+
+ return retval;
+}
+
+static int mv_u3d_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
+{
+ struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
+ struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+ unsigned long flags;
+
+ if (u3d->driver)
+ return -EBUSY;
+
+ spin_lock_irqsave(&u3d->lock, flags);
+
+ if (!u3d->clock_gating) {
+ clk_enable(u3d->clk);
+ if (pdata->phy_init)
+ pdata->phy_init(u3d->phy_regs);
+ }
+
+ /* hook up the driver ... */
+ driver->driver.bus = NULL;
+ u3d->driver = driver;
+ u3d->gadget.dev.driver = &driver->driver;
+
+ u3d->ep0_dir = USB_DIR_OUT;
+
+ spin_unlock_irqrestore(&u3d->lock, flags);
+
+ u3d->vbus_valid_detect = 1;
+
+ return 0;
+}
+
+static int mv_u3d_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
+{
+ struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
+ struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+ unsigned long flags;
+
+ u3d->vbus_valid_detect = 0;
+ spin_lock_irqsave(&u3d->lock, flags);
+
+ /* enable clock to access controller register */
+ clk_enable(u3d->clk);
+ if (pdata->phy_init)
+ pdata->phy_init(u3d->phy_regs);
+
+ mv_u3d_controller_stop(u3d);
+ /* stop all usb activities */
+ u3d->gadget.speed = USB_SPEED_UNKNOWN;
+ mv_u3d_stop_activity(u3d, driver);
+ mv_u3d_disable(u3d);
+
+ if (pdata->phy_deinit)
+ pdata->phy_deinit(u3d->phy_regs);
+ clk_disable(u3d->clk);
+
+ spin_unlock_irqrestore(&u3d->lock, flags);
+
+ u3d->gadget.dev.driver = NULL;
+ u3d->driver = NULL;
+
+ return 0;
+}
+
+/* device controller usb_gadget_ops structure */
+static const struct usb_gadget_ops mv_u3d_ops = {
+ /* notify controller that VBUS is powered or not */
+ .vbus_session = mv_u3d_vbus_session,
+
+ /* constrain controller's VBUS power usage */
+ .vbus_draw = mv_u3d_vbus_draw,
+
+ .pullup = mv_u3d_pullup,
+ .udc_start = mv_u3d_start,
+ .udc_stop = mv_u3d_stop,
+};
+
+static int mv_u3d_eps_init(struct mv_u3d *u3d)
+{
+ struct mv_u3d_ep *ep;
+ char name[14];
+ int i;
+
+ /* initialize ep0, ep0 in/out use eps[1] */
+ ep = &u3d->eps[1];
+ ep->u3d = u3d;
+ strncpy(ep->name, "ep0", sizeof(ep->name));
+ ep->ep.name = ep->name;
+ ep->ep.ops = &mv_u3d_ep_ops;
+ ep->wedge = 0;
+ ep->ep.maxpacket = MV_U3D_EP0_MAX_PKT_SIZE;
+ ep->ep_num = 0;
+ ep->ep.desc = &mv_u3d_ep0_desc;
+ INIT_LIST_HEAD(&ep->queue);
+ INIT_LIST_HEAD(&ep->req_list);
+ ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+ /* add ep0 ep_context */
+ ep->ep_context = &u3d->ep_context[1];
+
+ /* initialize other endpoints */
+ for (i = 2; i < u3d->max_eps * 2; i++) {
+ ep = &u3d->eps[i];
+ if (i & 1) {
+ snprintf(name, sizeof(name), "ep%din", i >> 1);
+ ep->direction = MV_U3D_EP_DIR_IN;
+ } else {
+ snprintf(name, sizeof(name), "ep%dout", i >> 1);
+ ep->direction = MV_U3D_EP_DIR_OUT;
+ }
+ ep->u3d = u3d;
+ strncpy(ep->name, name, sizeof(ep->name));
+ ep->ep.name = ep->name;
+
+ ep->ep.ops = &mv_u3d_ep_ops;
+ ep->ep.maxpacket = (unsigned short) ~0;
+ ep->ep_num = i / 2;
+
+ INIT_LIST_HEAD(&ep->queue);
+ list_add_tail(&ep->ep.ep_list, &u3d->gadget.ep_list);
+
+ INIT_LIST_HEAD(&ep->req_list);
+ spin_lock_init(&ep->req_lock);
+ ep->ep_context = &u3d->ep_context[i];
+ }
+
+ return 0;
+}
+
+/* delete all endpoint requests, called with spinlock held */
+static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status)
+{
+ /* endpoint fifo flush */
+ mv_u3d_ep_fifo_flush(&ep->ep);
+
+ while (!list_empty(&ep->queue)) {
+ struct mv_u3d_req *req = NULL;
+ req = list_entry(ep->queue.next, struct mv_u3d_req, queue);
+ mv_u3d_done(ep, req, status);
+ }
+}
+
+/* stop all USB activities */
+static
+void mv_u3d_stop_activity(struct mv_u3d *u3d, struct usb_gadget_driver *driver)
+{
+ struct mv_u3d_ep *ep;
+
+ mv_u3d_nuke(&u3d->eps[1], -ESHUTDOWN);
+
+ list_for_each_entry(ep, &u3d->gadget.ep_list, ep.ep_list) {
+ mv_u3d_nuke(ep, -ESHUTDOWN);
+ }
+
+ /* report disconnect; the driver is already quiesced */
+ if (driver) {
+ spin_unlock(&u3d->lock);
+ driver->disconnect(&u3d->gadget);
+ spin_lock(&u3d->lock);
+ }
+}
+
+static void mv_u3d_irq_process_error(struct mv_u3d *u3d)
+{
+ /* Increment the error count */
+ u3d->errors++;
+ dev_err(u3d->dev, "%s\n", __func__);
+}
+
+static void mv_u3d_irq_process_link_change(struct mv_u3d *u3d)
+{
+ u32 linkchange;
+
+ linkchange = ioread32(&u3d->vuc_regs->linkchange);
+ iowrite32(linkchange, &u3d->vuc_regs->linkchange);
+
+ dev_dbg(u3d->dev, "linkchange: 0x%x\n", linkchange);
+
+ if (linkchange & MV_U3D_LINK_CHANGE_LINK_UP) {
+ dev_dbg(u3d->dev, "link up: ltssm state: 0x%x\n",
+ ioread32(&u3d->vuc_regs->ltssmstate));
+
+ u3d->usb_state = USB_STATE_DEFAULT;
+ u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+ u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+
+ /* set speed */
+ u3d->gadget.speed = USB_SPEED_SUPER;
+ }
+
+ if (linkchange & MV_U3D_LINK_CHANGE_SUSPEND) {
+ dev_dbg(u3d->dev, "link suspend\n");
+ u3d->resume_state = u3d->usb_state;
+ u3d->usb_state = USB_STATE_SUSPENDED;
+ }
+
+ if (linkchange & MV_U3D_LINK_CHANGE_RESUME) {
+ dev_dbg(u3d->dev, "link resume\n");
+ u3d->usb_state = u3d->resume_state;
+ u3d->resume_state = 0;
+ }
+
+ if (linkchange & MV_U3D_LINK_CHANGE_WRESET) {
+ dev_dbg(u3d->dev, "warm reset\n");
+ u3d->usb_state = USB_STATE_POWERED;
+ }
+
+ if (linkchange & MV_U3D_LINK_CHANGE_HRESET) {
+ dev_dbg(u3d->dev, "hot reset\n");
+ u3d->usb_state = USB_STATE_DEFAULT;
+ }
+
+ if (linkchange & MV_U3D_LINK_CHANGE_INACT)
+ dev_dbg(u3d->dev, "inactive\n");
+
+ if (linkchange & MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0)
+ dev_dbg(u3d->dev, "ss.disabled\n");
+
+ if (linkchange & MV_U3D_LINK_CHANGE_VBUS_INVALID) {
+ dev_dbg(u3d->dev, "vbus invalid\n");
+ u3d->usb_state = USB_STATE_ATTACHED;
+ u3d->vbus_valid_detect = 1;
+ /* if external vbus detect is not supported,
+ * we handle it here.
+ */
+ if (!u3d->vbus) {
+ spin_unlock(&u3d->lock);
+ mv_u3d_vbus_session(&u3d->gadget, 0);
+ spin_lock(&u3d->lock);
+ }
+ }
+}
+
+static void mv_u3d_ch9setaddress(struct mv_u3d *u3d,
+ struct usb_ctrlrequest *setup)
+{
+ u32 tmp;
+
+ if (u3d->usb_state != USB_STATE_DEFAULT) {
+ dev_err(u3d->dev,
+ "%s, cannot setaddr in this state (%d)\n",
+ __func__, u3d->usb_state);
+ goto err;
+ }
+
+ u3d->dev_addr = (u8)setup->wValue;
+
+ dev_dbg(u3d->dev, "%s: 0x%x\n", __func__, u3d->dev_addr);
+
+ if (u3d->dev_addr > 127) {
+ dev_err(u3d->dev,
+ "%s, u3d address is wrong (out of range)\n", __func__);
+ u3d->dev_addr = 0;
+ goto err;
+ }
+
+ /* update usb state */
+ u3d->usb_state = USB_STATE_ADDRESS;
+
+ /* set the new address */
+ tmp = ioread32(&u3d->vuc_regs->devaddrtiebrkr);
+ tmp &= ~0x7F;
+ tmp |= (u32)u3d->dev_addr;
+ iowrite32(tmp, &u3d->vuc_regs->devaddrtiebrkr);
+
+ return;
+err:
+ mv_u3d_ep0_stall(u3d);
+}
+
+static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup)
+{
+ if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+ if (setup->bRequest == USB_REQ_SET_CONFIGURATION)
+ return 1;
+
+ return 0;
+}
+
+static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num,
+ struct usb_ctrlrequest *setup)
+{
+ bool delegate = false;
+
+ mv_u3d_nuke(&u3d->eps[ep_num * 2 + MV_U3D_EP_DIR_IN], -ESHUTDOWN);
+
+ dev_dbg(u3d->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+ setup->bRequestType, setup->bRequest,
+ setup->wValue, setup->wIndex, setup->wLength);
+
+ /* We process some stardard setup requests here */
+ if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+ switch (setup->bRequest) {
+ case USB_REQ_GET_STATUS:
+ delegate = true;
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ mv_u3d_ch9setaddress(u3d, setup);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ delegate = true;
+ break;
+
+ case USB_REQ_SET_FEATURE:
+ delegate = true;
+ break;
+
+ default:
+ delegate = true;
+ }
+ } else
+ delegate = true;
+
+ /* delegate USB standard requests to the gadget driver */
+ if (delegate == true) {
+ /* USB requests handled by gadget */
+ if (setup->wLength) {
+ /* DATA phase from gadget, STATUS phase from u3d */
+ u3d->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+ ? MV_U3D_EP_DIR_IN : MV_U3D_EP_DIR_OUT;
+ spin_unlock(&u3d->lock);
+ if (u3d->driver->setup(&u3d->gadget,
+ &u3d->local_setup_buff) < 0) {
+ dev_err(u3d->dev, "setup error!\n");
+ mv_u3d_ep0_stall(u3d);
+ }
+ spin_lock(&u3d->lock);
+ } else {
+ /* no DATA phase, STATUS phase from gadget */
+ u3d->ep0_dir = MV_U3D_EP_DIR_IN;
+ u3d->ep0_state = MV_U3D_STATUS_STAGE;
+ spin_unlock(&u3d->lock);
+ if (u3d->driver->setup(&u3d->gadget,
+ &u3d->local_setup_buff) < 0)
+ mv_u3d_ep0_stall(u3d);
+ spin_lock(&u3d->lock);
+ }
+
+ if (mv_u3d_is_set_configuration(setup)) {
+ dev_dbg(u3d->dev, "u3d configured\n");
+ u3d->usb_state = USB_STATE_CONFIGURED;
+ }
+ }
+}
+
+static void mv_u3d_get_setup_data(struct mv_u3d *u3d, u8 ep_num, u8 *buffer_ptr)
+{
+ struct mv_u3d_ep_context *epcontext;
+
+ epcontext = &u3d->ep_context[ep_num * 2 + MV_U3D_EP_DIR_IN];
+
+ /* Copy the setup packet to local buffer */
+ memcpy(buffer_ptr, (u8 *) &epcontext->setup_buffer, 8);
+}
+
+static void mv_u3d_irq_process_setup(struct mv_u3d *u3d)
+{
+ u32 tmp, i;
+ /* Process all Setup packet received interrupts */
+ tmp = ioread32(&u3d->vuc_regs->setuplock);
+ if (tmp) {
+ for (i = 0; i < u3d->max_eps; i++) {
+ if (tmp & (1 << i)) {
+ mv_u3d_get_setup_data(u3d, i,
+ (u8 *)(&u3d->local_setup_buff));
+ mv_u3d_handle_setup_packet(u3d, i,
+ &u3d->local_setup_buff);
+ }
+ }
+ }
+
+ iowrite32(tmp, &u3d->vuc_regs->setuplock);
+}
+
+static void mv_u3d_irq_process_tr_complete(struct mv_u3d *u3d)
+{
+ u32 tmp, bit_pos;
+ int i, ep_num = 0, direction = 0;
+ struct mv_u3d_ep *curr_ep;
+ struct mv_u3d_req *curr_req, *temp_req;
+ int status;
+
+ tmp = ioread32(&u3d->vuc_regs->endcomplete);
+
+ dev_dbg(u3d->dev, "tr_complete: ep: 0x%x\n", tmp);
+ if (!tmp)
+ return;
+ iowrite32(tmp, &u3d->vuc_regs->endcomplete);
+
+ for (i = 0; i < u3d->max_eps * 2; i++) {
+ ep_num = i >> 1;
+ direction = i % 2;
+
+ bit_pos = 1 << (ep_num + 16 * direction);
+
+ if (!(bit_pos & tmp))
+ continue;
+
+ if (i == 0)
+ curr_ep = &u3d->eps[1];
+ else
+ curr_ep = &u3d->eps[i];
+
+ /* remove req out of ep request list after completion */
+ dev_dbg(u3d->dev, "tr comp: check req_list\n");
+ spin_lock(&curr_ep->req_lock);
+ if (!list_empty(&curr_ep->req_list)) {
+ struct mv_u3d_req *req;
+ req = list_entry(curr_ep->req_list.next,
+ struct mv_u3d_req, list);
+ list_del_init(&req->list);
+ curr_ep->processing = 0;
+ }
+ spin_unlock(&curr_ep->req_lock);
+
+ /* process the req queue until an uncomplete request */
+ list_for_each_entry_safe(curr_req, temp_req,
+ &curr_ep->queue, queue) {
+ status = mv_u3d_process_ep_req(u3d, i, curr_req);
+ if (status)
+ break;
+ /* write back status to req */
+ curr_req->req.status = status;
+
+ /* ep0 request completion */
+ if (ep_num == 0) {
+ mv_u3d_done(curr_ep, curr_req, 0);
+ break;
+ } else {
+ mv_u3d_done(curr_ep, curr_req, status);
+ }
+ }
+
+ dev_dbg(u3d->dev, "call mv_u3d_start_queue from ep complete\n");
+ mv_u3d_start_queue(curr_ep);
+ }
+}
+
+static irqreturn_t mv_u3d_irq(int irq, void *dev)
+{
+ struct mv_u3d *u3d = (struct mv_u3d *)dev;
+ u32 status, intr;
+ u32 bridgesetting;
+ u32 trbunderrun;
+
+ spin_lock(&u3d->lock);
+
+ status = ioread32(&u3d->vuc_regs->intrcause);
+ intr = ioread32(&u3d->vuc_regs->intrenable);
+ status &= intr;
+
+ if (status == 0) {
+ spin_unlock(&u3d->lock);
+ dev_err(u3d->dev, "irq error!\n");
+ return IRQ_NONE;
+ }
+
+ if (status & MV_U3D_USBINT_VBUS_VALID) {
+ bridgesetting = ioread32(&u3d->vuc_regs->bridgesetting);
+ if (bridgesetting & MV_U3D_BRIDGE_SETTING_VBUS_VALID) {
+ /* write vbus valid bit of bridge setting to clear */
+ bridgesetting = MV_U3D_BRIDGE_SETTING_VBUS_VALID;
+ iowrite32(bridgesetting, &u3d->vuc_regs->bridgesetting);
+ dev_dbg(u3d->dev, "vbus valid\n");
+
+ u3d->usb_state = USB_STATE_POWERED;
+ u3d->vbus_valid_detect = 0;
+ /* if external vbus detect is not supported,
+ * we handle it here.
+ */
+ if (!u3d->vbus) {
+ spin_unlock(&u3d->lock);
+ mv_u3d_vbus_session(&u3d->gadget, 1);
+ spin_lock(&u3d->lock);
+ }
+ } else
+ dev_err(u3d->dev, "vbus bit is not set\n");
+ }
+
+ /* RX data is already in the 16KB FIFO.*/
+ if (status & MV_U3D_USBINT_UNDER_RUN) {
+ trbunderrun = ioread32(&u3d->vuc_regs->trbunderrun);
+ dev_err(u3d->dev, "under run, ep%d\n", trbunderrun);
+ iowrite32(trbunderrun, &u3d->vuc_regs->trbunderrun);
+ mv_u3d_irq_process_error(u3d);
+ }
+
+ if (status & (MV_U3D_USBINT_RXDESC_ERR | MV_U3D_USBINT_TXDESC_ERR)) {
+ /* write one to clear */
+ iowrite32(status & (MV_U3D_USBINT_RXDESC_ERR
+ | MV_U3D_USBINT_TXDESC_ERR),
+ &u3d->vuc_regs->intrcause);
+ dev_err(u3d->dev, "desc err 0x%x\n", status);
+ mv_u3d_irq_process_error(u3d);
+ }
+
+ if (status & MV_U3D_USBINT_LINK_CHG)
+ mv_u3d_irq_process_link_change(u3d);
+
+ if (status & MV_U3D_USBINT_TX_COMPLETE)
+ mv_u3d_irq_process_tr_complete(u3d);
+
+ if (status & MV_U3D_USBINT_RX_COMPLETE)
+ mv_u3d_irq_process_tr_complete(u3d);
+
+ if (status & MV_U3D_USBINT_SETUP)
+ mv_u3d_irq_process_setup(u3d);
+
+ spin_unlock(&u3d->lock);
+ return IRQ_HANDLED;
+}
+
+static void mv_u3d_gadget_release(struct device *dev)
+{
+ dev_dbg(dev, "%s\n", __func__);
+}
+
+static __devexit int mv_u3d_remove(struct platform_device *dev)
+{
+ struct mv_u3d *u3d = platform_get_drvdata(dev);
+
+ BUG_ON(u3d == NULL);
+
+ usb_del_gadget_udc(&u3d->gadget);
+
+ /* free memory allocated in probe */
+ if (u3d->trb_pool)
+ dma_pool_destroy(u3d->trb_pool);
+
+ if (u3d->ep_context)
+ dma_free_coherent(&dev->dev, u3d->ep_context_size,
+ u3d->ep_context, u3d->ep_context_dma);
+
+ kfree(u3d->eps);
+
+ if (u3d->irq)
+ free_irq(u3d->irq, &dev->dev);
+
+ if (u3d->cap_regs)
+ iounmap(u3d->cap_regs);
+ u3d->cap_regs = NULL;
+
+ kfree(u3d->status_req);
+
+ clk_put(u3d->clk);
+
+ device_unregister(&u3d->gadget.dev);
+
+ platform_set_drvdata(dev, NULL);
+
+ kfree(u3d);
+
+ return 0;
+}
+
+static int mv_u3d_probe(struct platform_device *dev)
+{
+ struct mv_u3d *u3d = NULL;
+ struct mv_usb_platform_data *pdata = dev->dev.platform_data;
+ int retval = 0;
+ struct resource *r;
+ size_t size;
+
+ if (!dev->dev.platform_data) {
+ dev_err(&dev->dev, "missing platform_data\n");
+ retval = -ENODEV;
+ goto err_pdata;
+ }
+
+ u3d = kzalloc(sizeof(*u3d), GFP_KERNEL);
+ if (!u3d) {
+ dev_err(&dev->dev, "failed to allocate memory for u3d\n");
+ retval = -ENOMEM;
+ goto err_alloc_private;
+ }
+
+ spin_lock_init(&u3d->lock);
+
+ platform_set_drvdata(dev, u3d);
+
+ u3d->dev = &dev->dev;
+ u3d->vbus = pdata->vbus;
+
+ u3d->clk = clk_get(&dev->dev, pdata->clkname[0]);
+ if (IS_ERR(u3d->clk)) {
+ retval = PTR_ERR(u3d->clk);
+ goto err_get_clk;
+ }
+
+ r = platform_get_resource_byname(dev, IORESOURCE_MEM, "capregs");
+ if (!r) {
+ dev_err(&dev->dev, "no I/O memory resource defined\n");
+ retval = -ENODEV;
+ goto err_get_cap_regs;
+ }
+
+ u3d->cap_regs = (struct mv_u3d_cap_regs __iomem *)
+ ioremap(r->start, resource_size(r));
+ if (!u3d->cap_regs) {
+ dev_err(&dev->dev, "failed to map I/O memory\n");
+ retval = -EBUSY;
+ goto err_map_cap_regs;
+ } else {
+ dev_dbg(&dev->dev, "cap_regs address: 0x%x/0x%x\n",
+ (unsigned int)r->start, (unsigned int)u3d->cap_regs);
+ }
+
+ /* we will access controller register, so enable the u3d controller */
+ clk_enable(u3d->clk);
+
+ if (pdata->phy_init) {
+ retval = pdata->phy_init(u3d->phy_regs);
+ if (retval) {
+ dev_err(&dev->dev, "init phy error %d\n", retval);
+ goto err_u3d_enable;
+ }
+ }
+
+ u3d->op_regs = (struct mv_u3d_op_regs __iomem *)((u32)u3d->cap_regs
+ + MV_U3D_USB3_OP_REGS_OFFSET);
+
+ u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)((u32)u3d->cap_regs
+ + ioread32(&u3d->cap_regs->vuoff));
+
+ u3d->max_eps = 16;
+
+ /*
+ * some platform will use usb to download image, it may not disconnect
+ * usb gadget before loading kernel. So first stop u3d here.
+ */
+ mv_u3d_controller_stop(u3d);
+ iowrite32(0xFFFFFFFF, &u3d->vuc_regs->intrcause);
+
+ if (pdata->phy_deinit)
+ pdata->phy_deinit(u3d->phy_regs);
+ clk_disable(u3d->clk);
+
+ size = u3d->max_eps * sizeof(struct mv_u3d_ep_context) * 2;
+ size = (size + MV_U3D_EP_CONTEXT_ALIGNMENT - 1)
+ & ~(MV_U3D_EP_CONTEXT_ALIGNMENT - 1);
+ u3d->ep_context = dma_alloc_coherent(&dev->dev, size,
+ &u3d->ep_context_dma, GFP_KERNEL);
+ if (!u3d->ep_context) {
+ dev_err(&dev->dev, "allocate ep context memory failed\n");
+ retval = -ENOMEM;
+ goto err_alloc_ep_context;
+ }
+ u3d->ep_context_size = size;
+
+ /* create TRB dma_pool resource */
+ u3d->trb_pool = dma_pool_create("u3d_trb",
+ &dev->dev,
+ sizeof(struct mv_u3d_trb_hw),
+ MV_U3D_TRB_ALIGNMENT,
+ MV_U3D_DMA_BOUNDARY);
+
+ if (!u3d->trb_pool) {
+ retval = -ENOMEM;
+ goto err_alloc_trb_pool;
+ }
+
+ size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2;
+ u3d->eps = kzalloc(size, GFP_KERNEL);
+ if (!u3d->eps) {
+ dev_err(&dev->dev, "allocate ep memory failed\n");
+ retval = -ENOMEM;
+ goto err_alloc_eps;
+ }
+
+ /* initialize ep0 status request structure */
+ u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL);
+ if (!u3d->status_req) {
+ dev_err(&dev->dev, "allocate status_req memory failed\n");
+ retval = -ENOMEM;
+ goto err_alloc_status_req;
+ }
+ INIT_LIST_HEAD(&u3d->status_req->queue);
+
+ /* allocate a small amount of memory to get valid address */
+ u3d->status_req->req.buf = (char *)u3d->status_req
+ + sizeof(struct mv_u3d_req);
+ u3d->status_req->req.dma = virt_to_phys(u3d->status_req->req.buf);
+
+ u3d->resume_state = USB_STATE_NOTATTACHED;
+ u3d->usb_state = USB_STATE_ATTACHED;
+ u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+ u3d->remote_wakeup = 0;
+
+ r = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+ if (!r) {
+ dev_err(&dev->dev, "no IRQ resource defined\n");
+ retval = -ENODEV;
+ goto err_get_irq;
+ }
+ u3d->irq = r->start;
+ if (request_irq(u3d->irq, mv_u3d_irq,
+ IRQF_DISABLED | IRQF_SHARED, driver_name, u3d)) {
+ u3d->irq = 0;
+ dev_err(&dev->dev, "Request irq %d for u3d failed\n",
+ u3d->irq);
+ retval = -ENODEV;
+ goto err_request_irq;
+ }
+
+ /* initialize gadget structure */
+ u3d->gadget.ops = &mv_u3d_ops; /* usb_gadget_ops */
+ u3d->gadget.ep0 = &u3d->eps[1].ep; /* gadget ep0 */
+ INIT_LIST_HEAD(&u3d->gadget.ep_list); /* ep_list */
+ u3d->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
+
+ /* the "gadget" abstracts/virtualizes the controller */
+ dev_set_name(&u3d->gadget.dev, "gadget");
+ u3d->gadget.dev.parent = &dev->dev;
+ u3d->gadget.dev.dma_mask = dev->dev.dma_mask;
+ u3d->gadget.dev.release = mv_u3d_gadget_release;
+ u3d->gadget.name = driver_name; /* gadget name */
+
+ retval = device_register(&u3d->gadget.dev);
+ if (retval)
+ goto err_register_gadget_device;
+
+ mv_u3d_eps_init(u3d);
+
+ /* external vbus detection */
+ if (u3d->vbus) {
+ u3d->clock_gating = 1;
+ dev_err(&dev->dev, "external vbus detection\n");
+ }
+
+ if (!u3d->clock_gating)
+ u3d->vbus_active = 1;
+
+ /* enable usb3 controller vbus detection */
+ u3d->vbus_valid_detect = 1;
+
+ retval = usb_add_gadget_udc(&dev->dev, &u3d->gadget);
+ if (retval)
+ goto err_unregister;
+
+ dev_dbg(&dev->dev, "successful probe usb3 device %s clock gating.\n",
+ u3d->clock_gating ? "with" : "without");
+
+ return 0;
+
+err_unregister:
+ device_unregister(&u3d->gadget.dev);
+err_register_gadget_device:
+ free_irq(u3d->irq, &dev->dev);
+err_request_irq:
+err_get_irq:
+ kfree(u3d->status_req);
+err_alloc_status_req:
+ kfree(u3d->eps);
+err_alloc_eps:
+ dma_pool_destroy(u3d->trb_pool);
+err_alloc_trb_pool:
+ dma_free_coherent(&dev->dev, u3d->ep_context_size,
+ u3d->ep_context, u3d->ep_context_dma);
+err_alloc_ep_context:
+ if (pdata->phy_deinit)
+ pdata->phy_deinit(u3d->phy_regs);
+ clk_disable(u3d->clk);
+err_u3d_enable:
+ iounmap(u3d->cap_regs);
+err_map_cap_regs:
+err_get_cap_regs:
+err_get_clk:
+ clk_put(u3d->clk);
+ platform_set_drvdata(dev, NULL);
+ kfree(u3d);
+err_alloc_private:
+err_pdata:
+ return retval;
+}
+
+#ifdef CONFIG_PM
+static int mv_u3d_suspend(struct device *dev)
+{
+ struct mv_u3d *u3d = dev_get_drvdata(dev);
+
+ /*
+ * only cable is unplugged, usb can suspend.
+ * So do not care about clock_gating == 1, it is handled by
+ * vbus session.
+ */
+ if (!u3d->clock_gating) {
+ mv_u3d_controller_stop(u3d);
+
+ spin_lock_irq(&u3d->lock);
+ /* stop all usb activities */
+ mv_u3d_stop_activity(u3d, u3d->driver);
+ spin_unlock_irq(&u3d->lock);
+
+ mv_u3d_disable(u3d);
+ }
+
+ return 0;
+}
+
+static int mv_u3d_resume(struct device *dev)
+{
+ struct mv_u3d *u3d = dev_get_drvdata(dev);
+ int retval;
+
+ if (!u3d->clock_gating) {
+ retval = mv_u3d_enable(u3d);
+ if (retval)
+ return retval;
+
+ if (u3d->driver && u3d->softconnect) {
+ mv_u3d_controller_reset(u3d);
+ mv_u3d_ep0_reset(u3d);
+ mv_u3d_controller_start(u3d);
+ }
+ }
+
+ return 0;
+}
+
+SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume);
+#endif
+
+static void mv_u3d_shutdown(struct platform_device *dev)
+{
+ struct mv_u3d *u3d = dev_get_drvdata(&dev->dev);
+ u32 tmp;
+
+ tmp = ioread32(&u3d->op_regs->usbcmd);
+ tmp &= ~MV_U3D_CMD_RUN_STOP;
+ iowrite32(tmp, &u3d->op_regs->usbcmd);
+}
+
+static struct platform_driver mv_u3d_driver = {
+ .probe = mv_u3d_probe,
+ .remove = __exit_p(mv_u3d_remove),
+ .shutdown = mv_u3d_shutdown,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "mv-u3d",
+#ifdef CONFIG_PM
+ .pm = &mv_u3d_pm_ops,
+#endif
+ },
+};
+
+module_platform_driver(mv_u3d_driver);
+MODULE_ALIAS("platform:mv-u3d");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 117a4bb..75db2c3 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -19,6 +19,7 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/list.h>
@@ -1381,7 +1382,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
return retval;
}
- if (udc->transceiver) {
+ if (!IS_ERR_OR_NULL(udc->transceiver)) {
retval = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
if (retval) {
@@ -2107,7 +2108,7 @@ static int __devexit mv_udc_remove(struct platform_device *dev)
* then vbus irq will not be requested in udc driver.
*/
if (udc->pdata && udc->pdata->vbus
- && udc->clock_gating && udc->transceiver == NULL)
+ && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver))
free_irq(udc->pdata->vbus->irq, &dev->dev);
/* free memory allocated in probe */
@@ -2180,7 +2181,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
#ifdef CONFIG_USB_OTG_UTILS
if (pdata->mode == MV_USB_MODE_OTG)
- udc->transceiver = usb_get_transceiver();
+ udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
#endif
udc->clknum = pdata->clknum;
@@ -2325,7 +2326,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
eps_init(udc);
/* VBUS detect: we can disable/enable clock on demand.*/
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
udc->clock_gating = 1;
else if (pdata->vbus) {
udc->clock_gating = 1;
@@ -2369,7 +2370,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
err_unregister:
if (udc->pdata && udc->pdata->vbus
- && udc->clock_gating && udc->transceiver == NULL)
+ && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver))
free_irq(pdata->vbus->irq, &dev->dev);
device_unregister(&udc->gadget.dev);
err_free_irq:
@@ -2404,7 +2405,7 @@ static int mv_udc_suspend(struct device *_dev)
struct mv_udc *udc = the_controller;
/* if OTG is enabled, the following will be done in OTG driver*/
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
return 0;
if (udc->pdata->vbus && udc->pdata->vbus->poll)
@@ -2437,7 +2438,7 @@ static int mv_udc_resume(struct device *_dev)
int retval;
/* if OTG is enabled, the following will be done in OTG driver*/
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
return 0;
if (!udc->clock_gating) {
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 89cbd2b..f9132ad 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -35,10 +35,11 @@
#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/prefetch.h>
+#include <linux/io.h>
#include <asm/byteorder.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
#include <asm/mach-types.h>
@@ -60,11 +61,6 @@
#define DRIVER_DESC "OMAP UDC driver"
#define DRIVER_VERSION "4 October 2004"
-#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-
-#define OMAP2_DMA_CH(ch) (((ch) - 1) << 1)
-#define OMAP24XX_DMA(name, ch) (OMAP24XX_DMA_##name + OMAP2_DMA_CH(ch))
-
/*
* The OMAP UDC needs _very_ early endpoint setup: before enabling the
* D+ pullup to allow enumeration. That's too early for the gadget
@@ -88,14 +84,14 @@
#ifdef USE_ISO
static unsigned fifo_mode = 3;
#else
-static unsigned fifo_mode = 0;
+static unsigned fifo_mode;
#endif
/* "modprobe omap_udc fifo_mode=42", or else as a kernel
* boot parameter "omap_udc:fifo_mode=42"
*/
-module_param (fifo_mode, uint, 0);
-MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
+module_param(fifo_mode, uint, 0);
+MODULE_PARM_DESC(fifo_mode, "endpoint configuration");
#ifdef USE_DMA
static bool use_dma = 1;
@@ -103,8 +99,8 @@ static bool use_dma = 1;
/* "modprobe omap_udc use_dma=y", or else as a kernel
* boot parameter "omap_udc:use_dma=y"
*/
-module_param (use_dma, bool, 0);
-MODULE_PARM_DESC (use_dma, "enable/disable DMA");
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable DMA");
#else /* !USE_DMA */
/* save a bit of code */
@@ -112,8 +108,8 @@ MODULE_PARM_DESC (use_dma, "enable/disable DMA");
#endif /* !USE_DMA */
-static const char driver_name [] = "omap_udc";
-static const char driver_desc [] = DRIVER_DESC;
+static const char driver_name[] = "omap_udc";
+static const char driver_desc[] = DRIVER_DESC;
/*-------------------------------------------------------------------------*/
@@ -251,7 +247,7 @@ static int omap_ep_disable(struct usb_ep *_ep)
spin_lock_irqsave(&ep->udc->lock, flags);
ep->ep.desc = NULL;
- nuke (ep, -ESHUTDOWN);
+ nuke(ep, -ESHUTDOWN);
ep->ep.maxpacket = ep->maxpacket;
ep->has_dma = 0;
omap_writew(UDC_SET_HALT, UDC_CTRL);
@@ -272,10 +268,11 @@ omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
struct omap_req *req;
req = kzalloc(sizeof(*req), gfp_flags);
- if (req) {
- req->req.dma = DMA_ADDR_INVALID;
- INIT_LIST_HEAD (&req->queue);
- }
+ if (!req)
+ return NULL;
+
+ INIT_LIST_HEAD(&req->queue);
+
return &req->req;
}
@@ -284,8 +281,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req)
{
struct omap_req *req = container_of(_req, struct omap_req, req);
- if (_req)
- kfree (req);
+ kfree(req);
}
/*-------------------------------------------------------------------------*/
@@ -293,6 +289,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req)
static void
done(struct omap_ep *ep, struct omap_req *req, int status)
{
+ struct omap_udc *udc = ep->udc;
unsigned stopped = ep->stopped;
list_del_init(&req->queue);
@@ -302,22 +299,9 @@ done(struct omap_ep *ep, struct omap_req *req, int status)
else
status = req->req.status;
- if (use_dma && ep->has_dma) {
- if (req->mapped) {
- dma_unmap_single(ep->udc->gadget.dev.parent,
- req->req.dma, req->req.length,
- (ep->bEndpointAddress & USB_DIR_IN)
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- req->req.dma = DMA_ADDR_INVALID;
- req->mapped = 0;
- } else
- dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
- req->req.dma, req->req.length,
- (ep->bEndpointAddress & USB_DIR_IN)
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- }
+ if (use_dma && ep->has_dma)
+ usb_gadget_unmap_request(&udc->gadget, &req->req,
+ (ep->bEndpointAddress & USB_DIR_IN));
#ifndef USB_TRACE
if (status && status != -ESHUTDOWN)
@@ -365,10 +349,10 @@ write_packet(u8 *buf, struct omap_req *req, unsigned max)
return len;
}
-// FIXME change r/w fifo calling convention
+/* FIXME change r/w fifo calling convention */
-// return: 0 = still running, 1 = completed, negative = errno
+/* return: 0 = still running, 1 = completed, negative = errno */
static int write_fifo(struct omap_ep *ep, struct omap_req *req)
{
u8 *buf;
@@ -430,7 +414,7 @@ read_packet(u8 *buf, struct omap_req *req, unsigned avail)
return len;
}
-// return: 0 = still running, 1 = queue empty, negative = errno
+/* return: 0 = still running, 1 = queue empty, negative = errno */
static int read_fifo(struct omap_ep *ep, struct omap_req *req)
{
u8 *buf;
@@ -537,12 +521,8 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
: OMAP_DMA_SYNC_ELEMENT;
int dma_trigger = 0;
- if (cpu_is_omap24xx())
- dma_trigger = OMAP24XX_DMA(USB_W2FC_TX0, ep->dma_channel);
-
/* measure length in either bytes or packets */
if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC)
- || (cpu_is_omap24xx() && length < ep->maxpacket)
|| (cpu_is_omap15xx() && length < ep->maxpacket)) {
txdma_ctrl = UDC_TXN_EOT | length;
omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
@@ -601,28 +581,14 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
int dma_trigger = 0;
u16 w;
- if (cpu_is_omap24xx())
- dma_trigger = OMAP24XX_DMA(USB_W2FC_RX0, ep->dma_channel);
-
- /* NOTE: we filtered out "short reads" before, so we know
- * the buffer has only whole numbers of packets.
- * except MODE SELECT(6) sent the 24 bytes data in OMAP24XX DMA mode
- */
- if (cpu_is_omap24xx() && packets < ep->maxpacket) {
- omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
- packets, 1, OMAP_DMA_SYNC_ELEMENT,
- dma_trigger, 0);
- req->dma_bytes = packets;
- } else {
- /* set up this DMA transfer, enable the fifo, start */
- packets /= ep->ep.maxpacket;
- packets = min(packets, (unsigned)UDC_RXN_TC + 1);
- req->dma_bytes = packets * ep->ep.maxpacket;
- omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
- ep->ep.maxpacket >> 1, packets,
- OMAP_DMA_SYNC_ELEMENT,
- dma_trigger, 0);
- }
+ /* set up this DMA transfer, enable the fifo, start */
+ packets /= ep->ep.maxpacket;
+ packets = min(packets, (unsigned)UDC_RXN_TC + 1);
+ req->dma_bytes = packets * ep->ep.maxpacket;
+ omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
+ ep->ep.maxpacket >> 1, packets,
+ OMAP_DMA_SYNC_ELEMENT,
+ dma_trigger, 0);
omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
0, 0);
@@ -684,7 +650,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
}
omap_writew(UDC_TXN_DONE, UDC_IRQ_SRC);
- if (!list_empty (&ep->queue)) {
+ if (!list_empty(&ep->queue)) {
req = container_of(ep->queue.next,
struct omap_req, queue);
next_in_dma(ep, req);
@@ -703,7 +669,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
}
omap_writew(UDC_RXN_EOT, UDC_IRQ_SRC);
- if (!list_empty (&ep->queue)) {
+ if (!list_empty(&ep->queue)) {
req = container_of(ep->queue.next,
struct omap_req, queue);
next_out_dma(ep, req);
@@ -761,10 +727,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
ep->dma_channel = channel;
if (is_in) {
- if (cpu_is_omap24xx())
- dma_channel = OMAP24XX_DMA(USB_W2FC_TX0, channel);
- else
- dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel;
+ dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel;
status = omap_request_dma(dma_channel,
ep->ep.name, dma_error, ep, &ep->lch);
if (status == 0) {
@@ -781,11 +744,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
0, 0);
}
} else {
- if (cpu_is_omap24xx())
- dma_channel = OMAP24XX_DMA(USB_W2FC_RX0, channel);
- else
- dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel;
-
+ dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel;
status = omap_request_dma(dma_channel,
ep->ep.name, dma_error, ep, &ep->lch);
if (status == 0) {
@@ -809,7 +768,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ);
/* channel type P: hw synch (fifo) */
- if (cpu_class_is_omap1() && !cpu_is_omap15xx())
+ if (!cpu_is_omap15xx())
omap_set_dma_channel_mode(ep->lch, OMAP_DMA_LCH_P);
}
@@ -929,13 +888,11 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
/* this isn't bogus, but OMAP DMA isn't the only hardware to
* have a hard time with partial packet reads... reject it.
- * Except OMAP2 can handle the small packets.
*/
if (use_dma
&& ep->has_dma
&& ep->bEndpointAddress != 0
&& (ep->bEndpointAddress & USB_DIR_IN) == 0
- && !cpu_class_is_omap2()
&& (req->req.length % ep->ep.maxpacket) != 0) {
DBG("%s, no partial packet OUT reads\n", __func__);
return -EMSGSIZE;
@@ -945,26 +902,9 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
return -ESHUTDOWN;
- if (use_dma && ep->has_dma) {
- if (req->req.dma == DMA_ADDR_INVALID) {
- req->req.dma = dma_map_single(
- ep->udc->gadget.dev.parent,
- req->req.buf,
- req->req.length,
- (ep->bEndpointAddress & USB_DIR_IN)
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- req->mapped = 1;
- } else {
- dma_sync_single_for_device(
- ep->udc->gadget.dev.parent,
- req->req.dma, req->req.length,
- (ep->bEndpointAddress & USB_DIR_IN)
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- req->mapped = 0;
- }
- }
+ if (use_dma && ep->has_dma)
+ usb_gadget_map_request(&udc->gadget, &req->req,
+ (ep->bEndpointAddress & USB_DIR_IN));
VDBG("%s queue req %p, len %d buf %p\n",
ep->ep.name, _req, _req->length, _req->buf);
@@ -985,7 +925,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
int is_in;
if (ep->bEndpointAddress == 0) {
- if (!udc->ep0_pending || !list_empty (&ep->queue)) {
+ if (!udc->ep0_pending || !list_empty(&ep->queue)) {
spin_unlock_irqrestore(&udc->lock, flags);
return -EL2HLT;
}
@@ -1012,7 +952,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
* always an IN ... even for IN transfers,
* a weird case which seem to stall OMAP.
*/
- omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+ omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+ UDC_EP_NUM);
omap_writew(UDC_CLR_EP, UDC_CTRL);
omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
omap_writew(UDC_EP_DIR, UDC_EP_NUM);
@@ -1024,7 +965,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
/* non-empty DATA stage */
} else if (is_in) {
- omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+ omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+ UDC_EP_NUM);
} else {
if (udc->ep0_setup)
goto irq_wait;
@@ -1072,7 +1014,7 @@ static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
spin_lock_irqsave(&ep->udc->lock, flags);
/* make sure it's actually queued on this endpoint */
- list_for_each_entry (req, &ep->queue, queue) {
+ list_for_each_entry(req, &ep->queue, queue) {
if (&req->req == _req)
break;
}
@@ -1179,8 +1121,8 @@ static struct usb_ep_ops omap_ep_ops = {
.dequeue = omap_ep_dequeue,
.set_halt = omap_ep_set_halt,
- // fifo_status ... report bytes in fifo
- // fifo_flush ... flush fifo
+ /* fifo_status ... report bytes in fifo */
+ /* fifo_flush ... flush fifo */
};
/*-------------------------------------------------------------------------*/
@@ -1212,7 +1154,7 @@ static int omap_wakeup(struct usb_gadget *gadget)
/* NOTE: non-OTG systems may use SRP TOO... */
} else if (!(udc->devstat & UDC_ATT)) {
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
retval = otg_start_srp(udc->transceiver->otg);
}
spin_unlock_irqrestore(&udc->lock, flags);
@@ -1344,7 +1286,7 @@ static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA)
struct omap_udc *udc;
udc = container_of(gadget, struct omap_udc, gadget);
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
return usb_phy_set_power(udc->transceiver, mA);
return -EOPNOTSUPP;
}
@@ -1410,7 +1352,7 @@ static void udc_quiesce(struct omap_udc *udc)
udc->gadget.speed = USB_SPEED_UNKNOWN;
nuke(&udc->ep[0], -ESHUTDOWN);
- list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list)
+ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list)
nuke(ep, -ESHUTDOWN);
}
@@ -1526,7 +1468,8 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
/* read next OUT packet of request, maybe
* reactiviting the fifo; stall on errors.
*/
- if (!req || (stat = read_fifo(ep0, req)) < 0) {
+ stat = read_fifo(ep0, req);
+ if (!req || stat < 0) {
omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
udc->ep0_pending = 0;
stat = 0;
@@ -1659,7 +1602,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
/* this has rude side-effects (aborts) and
* can't really work if DMA-IN is active
*/
- DBG("%s host set_halt, NYET \n", ep->name);
+ DBG("%s host set_halt, NYET\n", ep->name);
goto do_stall;
}
use_ep(ep, 0);
@@ -1750,7 +1693,7 @@ delegate:
*/
udc->ep0_setup = 1;
spin_unlock(&udc->lock);
- status = udc->driver->setup (&udc->gadget, &u.r);
+ status = udc->driver->setup(&udc->gadget, &u.r);
spin_lock(&udc->lock);
udc->ep0_setup = 0;
}
@@ -1793,12 +1736,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
if (devstat & UDC_ATT) {
udc->gadget.speed = USB_SPEED_FULL;
VDBG("connect\n");
- if (!udc->transceiver)
+ if (IS_ERR_OR_NULL(udc->transceiver))
pullup_enable(udc);
- // if (driver->connect) call it
+ /* if (driver->connect) call it */
} else if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
udc->gadget.speed = USB_SPEED_UNKNOWN;
- if (!udc->transceiver)
+ if (IS_ERR_OR_NULL(udc->transceiver))
pullup_disable(udc);
DBG("disconnect, gadget %s\n",
udc->driver->driver.name);
@@ -1827,7 +1770,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
}
if (change & UDC_SUS) {
if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
- // FIXME tell isp1301 to suspend/resume (?)
+ /* FIXME tell isp1301 to suspend/resume (?) */
if (devstat & UDC_SUS) {
VDBG("suspend\n");
update_otg(udc);
@@ -1838,12 +1781,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
udc->driver->suspend(&udc->gadget);
spin_lock(&udc->lock);
}
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
usb_phy_set_suspend(
udc->transceiver, 1);
} else {
VDBG("resume\n");
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
usb_phy_set_suspend(
udc->transceiver, 0);
if (udc->gadget.speed == USB_SPEED_FULL
@@ -2030,7 +1973,7 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
spin_lock_irqsave(&udc->lock, flags);
/* handle all non-DMA ISO transfers */
- list_for_each_entry (ep, &udc->iso, iso) {
+ list_for_each_entry(ep, &udc->iso, iso) {
u16 stat;
struct omap_req *req;
@@ -2089,15 +2032,11 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
static inline int machine_without_vbus_sense(void)
{
- return (machine_is_omap_innovator()
+ return machine_is_omap_innovator()
|| machine_is_omap_osk()
- || machine_is_omap_apollon()
-#ifndef CONFIG_MACH_OMAP_H4_OTG
- || machine_is_omap_h4()
-#endif
|| machine_is_sx1()
- || cpu_is_omap7xx() /* No known omap7xx boards with vbus sense */
- );
+ /* No known omap7xx boards with vbus sense */
+ || cpu_is_omap7xx();
}
static int omap_udc_start(struct usb_gadget_driver *driver,
@@ -2111,7 +2050,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
if (!udc)
return -ENODEV;
if (!driver
- // FIXME if otg, check: driver->is_otg
+ /* FIXME if otg, check: driver->is_otg */
|| driver->max_speed < USB_SPEED_FULL
|| !bind || !driver->setup)
return -EINVAL;
@@ -2123,7 +2062,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
}
/* reset state */
- list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
ep->irqs = 0;
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
continue;
@@ -2155,13 +2094,13 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC);
/* connect to bus through transceiver */
- if (udc->transceiver) {
+ if (!IS_ERR_OR_NULL(udc->transceiver)) {
status = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
if (status < 0) {
ERR("can't bind to transceiver\n");
if (driver->unbind) {
- driver->unbind (&udc->gadget);
+ driver->unbind(&udc->gadget);
udc->gadget.dev.driver = NULL;
udc->driver = NULL;
}
@@ -2169,9 +2108,9 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
}
} else {
if (can_pullup(udc))
- pullup_enable (udc);
+ pullup_enable(udc);
else
- pullup_disable (udc);
+ pullup_disable(udc);
}
/* boards that don't have VBUS sensing can't autogate 48MHz;
@@ -2202,7 +2141,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver)
if (machine_without_vbus_sense())
omap_vbus_session(&udc->gadget, 0);
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
(void) otg_set_peripheral(udc->transceiver->otg, NULL);
else
pullup_disable(udc);
@@ -2230,7 +2169,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver)
static const char proc_filename[] = "driver/udc";
#define FOURBITS "%s%s%s%s"
-#define EIGHTBITS FOURBITS FOURBITS
+#define EIGHTBITS "%s%s%s%s%s%s%s%s"
static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
{
@@ -2252,12 +2191,21 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
"\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n",
ep->name, buf,
ep->double_buf ? "dbuf " : "",
- ({char *s; switch(ep->ackwait){
- case 0: s = ""; break;
- case 1: s = "(ackw) "; break;
- case 2: s = "(ackw2) "; break;
- default: s = "(?) "; break;
- } s;}),
+ ({ char *s;
+ switch (ep->ackwait) {
+ case 0:
+ s = "";
+ break;
+ case 1:
+ s = "(ackw) ";
+ break;
+ case 2:
+ s = "(ackw2) ";
+ break;
+ default:
+ s = "(?) ";
+ break;
+ } s; }),
ep->irqs, stat_flg,
(stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "",
(stat_flg & UDC_MISS_IN) ? "miss_in " : "",
@@ -2273,10 +2221,10 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
(stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "",
(stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : "");
- if (list_empty (&ep->queue))
+ if (list_empty(&ep->queue))
seq_printf(s, "\t(queue empty)\n");
else
- list_for_each_entry (req, &ep->queue, queue) {
+ list_for_each_entry(req, &ep->queue, queue) {
unsigned length = req->req.actual;
if (use_dma && buf[0]) {
@@ -2294,11 +2242,16 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
static char *trx_mode(unsigned m, int enabled)
{
switch (m) {
- case 0: return enabled ? "*6wire" : "unused";
- case 1: return "4wire";
- case 2: return "3wire";
- case 3: return "6wire";
- default: return "unknown";
+ case 0:
+ return enabled ? "*6wire" : "unused";
+ case 1:
+ return "4wire";
+ case 2:
+ return "3wire";
+ case 3:
+ return "6wire";
+ default:
+ return "unknown";
}
}
@@ -2308,12 +2261,9 @@ static int proc_otg_show(struct seq_file *s)
u32 trans = 0;
char *ctrl_name = "(UNKNOWN)";
- /* XXX This needs major revision for OMAP2+ */
tmp = omap_readl(OTG_REV);
- if (cpu_class_is_omap1()) {
- ctrl_name = "tranceiver_ctrl";
- trans = omap_readw(USB_TRANSCEIVER_CTRL);
- }
+ ctrl_name = "tranceiver_ctrl";
+ trans = omap_readw(USB_TRANSCEIVER_CTRL);
seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
tmp >> 4, tmp & 0xf, ctrl_name, trans);
tmp = omap_readw(OTG_SYSCON_1);
@@ -2333,7 +2283,7 @@ static int proc_otg_show(struct seq_file *s)
" b_ase_brst=%d hmc=%d\n", tmp,
(tmp & OTG_EN) ? " otg_en" : "",
(tmp & USBX_SYNCHRO) ? " synchro" : "",
- // much more SRP stuff
+ /* much more SRP stuff */
(tmp & SRP_DATA) ? " srp_data" : "",
(tmp & SRP_VBUS) ? " srp_vbus" : "",
(tmp & OTG_PADEN) ? " otg_paden" : "",
@@ -2400,14 +2350,12 @@ static int proc_udc_show(struct seq_file *s, void *_)
HMC,
udc->transceiver
? udc->transceiver->label
- : ((cpu_is_omap1710() || cpu_is_omap24xx())
+ : (cpu_is_omap1710()
? "external" : "(none)"));
- if (cpu_class_is_omap1()) {
- seq_printf(s, "ULPD control %04x req %04x status %04x\n",
- omap_readw(ULPD_CLOCK_CTRL),
- omap_readw(ULPD_SOFT_REQ),
- omap_readw(ULPD_STATUS_REQ));
- }
+ seq_printf(s, "ULPD control %04x req %04x status %04x\n",
+ omap_readw(ULPD_CLOCK_CTRL),
+ omap_readw(ULPD_SOFT_REQ),
+ omap_readw(ULPD_STATUS_REQ));
/* OTG controller registers */
if (!cpu_is_omap15xx())
@@ -2423,7 +2371,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
(tmp & UDC_SELF_PWR) ? " self_pwr" : "",
(tmp & UDC_SOFF_DIS) ? " soff_dis" : "",
(tmp & UDC_PULLUP_EN) ? " PULLUP" : "");
- // syscon2 is write-only
+ /* syscon2 is write-only */
/* UDC controller registers */
if (!(tmp & UDC_PULLUP_EN)) {
@@ -2507,7 +2455,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
if (tmp & UDC_ATT) {
proc_ep_show(s, &udc->ep[0]);
if (tmp & UDC_ADD) {
- list_for_each_entry (ep, &udc->gadget.ep_list,
+ list_for_each_entry(ep, &udc->gadget.ep_list,
ep.ep_list) {
if (ep->ep.desc)
proc_ep_show(s, ep);
@@ -2558,7 +2506,7 @@ static inline void remove_proc_file(void) {}
* UDC_SYSCON_1.CFG_LOCK is set can now work. We won't use that
* capability yet though.
*/
-static unsigned __init
+static unsigned __devinit
omap_ep_setup(char *name, u8 addr, u8 type,
unsigned buf, unsigned maxp, int dbuf)
{
@@ -2576,14 +2524,29 @@ omap_ep_setup(char *name, u8 addr, u8 type,
/* chip setup ... bit values are same for IN, OUT */
if (type == USB_ENDPOINT_XFER_ISOC) {
switch (maxp) {
- case 8: epn_rxtx = 0 << 12; break;
- case 16: epn_rxtx = 1 << 12; break;
- case 32: epn_rxtx = 2 << 12; break;
- case 64: epn_rxtx = 3 << 12; break;
- case 128: epn_rxtx = 4 << 12; break;
- case 256: epn_rxtx = 5 << 12; break;
- case 512: epn_rxtx = 6 << 12; break;
- default: BUG();
+ case 8:
+ epn_rxtx = 0 << 12;
+ break;
+ case 16:
+ epn_rxtx = 1 << 12;
+ break;
+ case 32:
+ epn_rxtx = 2 << 12;
+ break;
+ case 64:
+ epn_rxtx = 3 << 12;
+ break;
+ case 128:
+ epn_rxtx = 4 << 12;
+ break;
+ case 256:
+ epn_rxtx = 5 << 12;
+ break;
+ case 512:
+ epn_rxtx = 6 << 12;
+ break;
+ default:
+ BUG();
}
epn_rxtx |= UDC_EPN_RX_ISO;
dbuf = 1;
@@ -2592,15 +2555,24 @@ omap_ep_setup(char *name, u8 addr, u8 type,
* and ignored for PIO-IN on newer chips
* (for more reliable behavior)
*/
- if (!use_dma || cpu_is_omap15xx() || cpu_is_omap24xx())
+ if (!use_dma || cpu_is_omap15xx())
dbuf = 0;
switch (maxp) {
- case 8: epn_rxtx = 0 << 12; break;
- case 16: epn_rxtx = 1 << 12; break;
- case 32: epn_rxtx = 2 << 12; break;
- case 64: epn_rxtx = 3 << 12; break;
- default: BUG();
+ case 8:
+ epn_rxtx = 0 << 12;
+ break;
+ case 16:
+ epn_rxtx = 1 << 12;
+ break;
+ case 32:
+ epn_rxtx = 2 << 12;
+ break;
+ case 64:
+ epn_rxtx = 3 << 12;
+ break;
+ default:
+ BUG();
}
if (dbuf && addr)
epn_rxtx |= UDC_EPN_RX_DB;
@@ -2640,7 +2612,7 @@ omap_ep_setup(char *name, u8 addr, u8 type,
ep->ep.name = ep->name;
ep->ep.ops = &omap_ep_ops;
ep->ep.maxpacket = ep->maxpacket = maxp;
- list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list);
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
return buf;
}
@@ -2648,11 +2620,11 @@ omap_ep_setup(char *name, u8 addr, u8 type,
static void omap_udc_release(struct device *dev)
{
complete(udc->done);
- kfree (udc);
+ kfree(udc);
udc = NULL;
}
-static int __init
+static int __devinit
omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
{
unsigned tmp, buf;
@@ -2666,13 +2638,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
omap_writew(0, UDC_TXDMA_CFG);
/* UDC_PULLUP_EN gates the chip clock */
- // OTG_SYSCON_1 |= DEV_IDLE_EN;
+ /* OTG_SYSCON_1 |= DEV_IDLE_EN; */
udc = kzalloc(sizeof(*udc), GFP_KERNEL);
if (!udc)
return -ENOMEM;
- spin_lock_init (&udc->lock);
+ spin_lock_init(&udc->lock);
udc->gadget.ops = &omap_gadget_ops;
udc->gadget.ep0 = &udc->ep[0].ep;
@@ -2702,13 +2674,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
omap_writew(0, UDC_EP_TX(tmp));
}
-#define OMAP_BULK_EP(name,addr) \
+#define OMAP_BULK_EP(name, addr) \
buf = omap_ep_setup(name "-bulk", addr, \
USB_ENDPOINT_XFER_BULK, buf, 64, 1);
-#define OMAP_INT_EP(name,addr, maxp) \
+#define OMAP_INT_EP(name, addr, maxp) \
buf = omap_ep_setup(name "-int", addr, \
USB_ENDPOINT_XFER_INT, buf, maxp, 0);
-#define OMAP_ISO_EP(name,addr, maxp) \
+#define OMAP_ISO_EP(name, addr, maxp) \
buf = omap_ep_setup(name "-iso", addr, \
USB_ENDPOINT_XFER_ISOC, buf, maxp, 1);
@@ -2789,15 +2761,18 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
return 0;
}
-static int __init omap_udc_probe(struct platform_device *pdev)
+static int __devinit omap_udc_probe(struct platform_device *pdev)
{
int status = -ENODEV;
int hmc;
struct usb_phy *xceiv = NULL;
const char *type = NULL;
struct omap_usb_config *config = pdev->dev.platform_data;
- struct clk *dc_clk;
- struct clk *hhc_clk;
+ struct clk *dc_clk = NULL;
+ struct clk *hhc_clk = NULL;
+
+ if (cpu_is_omap7xx())
+ use_dma = 0;
/* NOTE: "knows" the order of the resources! */
if (!request_mem_region(pdev->resource[0].start,
@@ -2817,16 +2792,6 @@ static int __init omap_udc_probe(struct platform_device *pdev)
udelay(100);
}
- if (cpu_is_omap24xx()) {
- dc_clk = clk_get(&pdev->dev, "usb_fck");
- hhc_clk = clk_get(&pdev->dev, "usb_l4_ick");
- BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
- /* can't use omap_udc_enable_clock yet */
- clk_enable(dc_clk);
- clk_enable(hhc_clk);
- udelay(100);
- }
-
if (cpu_is_omap7xx()) {
dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck");
@@ -2866,8 +2831,8 @@ static int __init omap_udc_probe(struct platform_device *pdev)
* use it. Except for OTG, we don't _need_ to talk to one;
* but not having one probably means no VBUS detection.
*/
- xceiv = usb_get_transceiver();
- if (xceiv)
+ xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (!IS_ERR_OR_NULL(xceiv))
type = xceiv->label;
else if (config->otg) {
DBG("OTG requires external transceiver!\n");
@@ -2876,14 +2841,6 @@ static int __init omap_udc_probe(struct platform_device *pdev)
hmc = HMC_1610;
- if (cpu_is_omap24xx()) {
- /* this could be transceiverless in one of the
- * "we don't need to know" modes.
- */
- type = "external";
- goto known;
- }
-
switch (hmc) {
case 0: /* POWERUP DEFAULT == 0 */
case 4:
@@ -2899,7 +2856,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
case 16:
case 19:
case 25:
- if (!xceiv) {
+ if (IS_ERR_OR_NULL(xceiv)) {
DBG("external transceiver not registered!\n");
type = "unknown";
}
@@ -2922,16 +2879,16 @@ bad_on_1710:
goto cleanup0;
}
}
-known:
+
INFO("hmc mode %d, %s transceiver\n", hmc, type);
/* a "gadget" abstracts/virtualizes the controller */
status = omap_udc_setup(pdev, xceiv);
- if (status) {
+ if (status)
goto cleanup0;
- }
+
xceiv = NULL;
- // "udc" is now valid
+ /* "udc" is now valid */
pullup_disable(udc);
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
udc->gadget.is_otg = (config->otg != 0);
@@ -2945,7 +2902,7 @@ known:
/* USB general purpose IRQ: ep0, state changes, dma, etc */
status = request_irq(pdev->resource[1].start, omap_udc_irq,
- IRQF_SAMPLE_RANDOM, driver_name, udc);
+ 0, driver_name, udc);
if (status != 0) {
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[1].start, status);
@@ -2954,7 +2911,7 @@ known:
/* USB "non-iso" IRQ (PIO for all but ep0) */
status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
- IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
+ 0, "omap_udc pio", udc);
if (status != 0) {
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[2].start, status);
@@ -2976,16 +2933,6 @@ known:
clk_disable(dc_clk);
}
- if (cpu_is_omap24xx()) {
- udc->dc_clk = dc_clk;
- udc->hhc_clk = hhc_clk;
- /* FIXME OMAP2 don't release hhc & dc clock */
-#if 0
- clk_disable(hhc_clk);
- clk_disable(dc_clk);
-#endif
- }
-
create_proc_file();
status = device_add(&udc->gadget.dev);
if (status)
@@ -3007,14 +2954,14 @@ cleanup2:
free_irq(pdev->resource[1].start, udc);
cleanup1:
- kfree (udc);
+ kfree(udc);
udc = NULL;
cleanup0:
- if (xceiv)
- usb_put_transceiver(xceiv);
+ if (!IS_ERR_OR_NULL(xceiv))
+ usb_put_phy(xceiv);
- if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) {
+ if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
clk_disable(hhc_clk);
clk_disable(dc_clk);
clk_put(hhc_clk);
@@ -3027,7 +2974,7 @@ cleanup0:
return status;
}
-static int __exit omap_udc_remove(struct platform_device *pdev)
+static int __devexit omap_udc_remove(struct platform_device *pdev)
{
DECLARE_COMPLETION_ONSTACK(done);
@@ -3041,8 +2988,8 @@ static int __exit omap_udc_remove(struct platform_device *pdev)
udc->done = &done;
pullup_disable(udc);
- if (udc->transceiver) {
- usb_put_transceiver(udc->transceiver);
+ if (!IS_ERR_OR_NULL(udc->transceiver)) {
+ usb_put_phy(udc->transceiver);
udc->transceiver = NULL;
}
omap_writew(0, UDC_SYSCON1);
@@ -3112,7 +3059,8 @@ static int omap_udc_resume(struct platform_device *dev)
/*-------------------------------------------------------------------------*/
static struct platform_driver udc_driver = {
- .remove = __exit_p(omap_udc_remove),
+ .probe = omap_udc_probe,
+ .remove = __devexit_p(omap_udc_remove),
.suspend = omap_udc_suspend,
.resume = omap_udc_resume,
.driver = {
@@ -3121,27 +3069,7 @@ static struct platform_driver udc_driver = {
},
};
-static int __init udc_init(void)
-{
- /* Disable DMA for omap7xx -- it doesn't work right. */
- if (cpu_is_omap7xx())
- use_dma = 0;
-
- INFO("%s, version: " DRIVER_VERSION
-#ifdef USE_ISO
- " (iso)"
-#endif
- "%s\n", driver_desc,
- use_dma ? " (dma)" : "");
- return platform_driver_probe(&udc_driver, omap_udc_probe);
-}
-module_init(udc_init);
-
-static void __exit udc_exit(void)
-{
- platform_driver_unregister(&udc_driver);
-}
-module_exit(udc_exit);
+module_platform_driver(udc_driver);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 1cfcc9e..f4fb71c 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -2208,7 +2208,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
return;
}
if ((td->status & PCH_UDC_BUFF_STS) == PCH_UDC_BS_DMA_DONE)
- if (td->status | PCH_UDC_DMA_LAST) {
+ if (td->status & PCH_UDC_DMA_LAST) {
count = td->status & PCH_UDC_RXTX_BYTES;
break;
}
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index f7ff9e8..53c093b 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -21,6 +21,7 @@
#include <linux/ioport.h>
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/init.h>
@@ -993,7 +994,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
udc = container_of(_gadget, struct pxa25x_udc, gadget);
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
return usb_phy_set_power(udc->transceiver, mA);
return -EOPNOTSUPP;
}
@@ -1299,7 +1300,7 @@ fail:
DMSG("registered gadget driver '%s'\n", driver->driver.name);
/* connect to bus through transceiver */
- if (dev->transceiver) {
+ if (!IS_ERR_OR_NULL(dev->transceiver)) {
retval = otg_set_peripheral(dev->transceiver->otg,
&dev->gadget);
if (retval) {
@@ -1359,7 +1360,7 @@ static int pxa25x_stop(struct usb_gadget_driver *driver)
stop_activity(dev, driver);
local_irq_enable();
- if (dev->transceiver)
+ if (!IS_ERR_OR_NULL(dev->transceiver))
(void) otg_set_peripheral(dev->transceiver->otg, NULL);
driver->unbind(&dev->gadget);
@@ -2159,7 +2160,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
- dev->transceiver = usb_get_transceiver();
+ dev->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
if (gpio_is_valid(dev->mach->gpio_pullup)) {
if ((retval = gpio_request(dev->mach->gpio_pullup,
@@ -2237,8 +2238,8 @@ lubbock_fail0:
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
- if (dev->transceiver) {
- usb_put_transceiver(dev->transceiver);
+ if (!IS_ERR_OR_NULL(dev->transceiver)) {
+ usb_put_phy(dev->transceiver);
dev->transceiver = NULL;
}
clk_put(dev->clk);
@@ -2279,8 +2280,8 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
clk_put(dev->clk);
- if (dev->transceiver) {
- usb_put_transceiver(dev->transceiver);
+ if (!IS_ERR_OR_NULL(dev->transceiver)) {
+ usb_put_phy(dev->transceiver);
dev->transceiver = NULL;
}
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 98acb3a..644b430 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/list.h>
@@ -1573,7 +1574,7 @@ static int should_enable_udc(struct pxa_udc *udc)
int put_on;
put_on = ((udc->pullup_on) && (udc->driver));
- put_on &= ((udc->vbus_sensed) || (!udc->transceiver));
+ put_on &= ((udc->vbus_sensed) || (IS_ERR_OR_NULL(udc->transceiver)));
return put_on;
}
@@ -1594,7 +1595,7 @@ static int should_disable_udc(struct pxa_udc *udc)
int put_off;
put_off = ((!udc->pullup_on) || (!udc->driver));
- put_off |= ((!udc->vbus_sensed) && (udc->transceiver));
+ put_off |= ((!udc->vbus_sensed) && (!IS_ERR_OR_NULL(udc->transceiver)));
return put_off;
}
@@ -1665,7 +1666,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
struct pxa_udc *udc;
udc = to_gadget_udc(_gadget);
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
return usb_phy_set_power(udc->transceiver, mA);
return -EOPNOTSUPP;
}
@@ -1834,7 +1835,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver,
dev_dbg(udc->dev, "registered gadget driver '%s'\n",
driver->driver.name);
- if (udc->transceiver) {
+ if (!IS_ERR_OR_NULL(udc->transceiver)) {
retval = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
if (retval) {
@@ -1908,7 +1909,7 @@ static int pxa27x_udc_stop(struct usb_gadget_driver *driver)
dev_info(udc->dev, "unregistered gadget driver '%s'\n",
driver->driver.name);
- if (udc->transceiver)
+ if (!IS_ERR_OR_NULL(udc->transceiver))
return otg_set_peripheral(udc->transceiver->otg, NULL);
return 0;
}
@@ -2464,7 +2465,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
udc->dev = &pdev->dev;
udc->mach = pdev->dev.platform_data;
- udc->transceiver = usb_get_transceiver();
+ udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
gpio = udc->mach->gpio_pullup;
if (gpio_is_valid(gpio)) {
@@ -2543,7 +2544,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev)
if (gpio_is_valid(gpio))
gpio_free(gpio);
- usb_put_transceiver(udc->transceiver);
+ usb_put_phy(udc->transceiver);
udc->transceiver = NULL;
platform_set_drvdata(_dev, NULL);
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index f4abb0e..b13e0bb 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -112,7 +112,6 @@ struct s3c_hsotg_ep {
struct s3c_hsotg_req *req;
struct dentry *debugfs;
- spinlock_t lock;
unsigned long total_data;
unsigned int size_loaded;
@@ -136,7 +135,6 @@ struct s3c_hsotg_ep {
* @driver: USB gadget driver
* @plat: The platform specific configuration data.
* @regs: The memory area mapped for accessing registers.
- * @regs_res: The resource that was allocated when claiming register space.
* @irq: The IRQ number we are using
* @supplies: Definition of USB power supplies
* @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
@@ -157,8 +155,9 @@ struct s3c_hsotg {
struct usb_gadget_driver *driver;
struct s3c_hsotg_plat *plat;
+ spinlock_t lock;
+
void __iomem *regs;
- struct resource *regs_res;
int irq;
struct clk *clk;
@@ -896,7 +895,6 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
struct s3c_hsotg_req *hs_req = our_req(req);
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
struct s3c_hsotg *hs = hs_ep->parent;
- unsigned long irqflags;
bool first;
dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
@@ -915,19 +913,30 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
return ret;
}
- spin_lock_irqsave(&hs_ep->lock, irqflags);
-
first = list_empty(&hs_ep->queue);
list_add_tail(&hs_req->queue, &hs_ep->queue);
if (first)
s3c_hsotg_start_req(hs, hs_ep, hs_req, false);
- spin_unlock_irqrestore(&hs_ep->lock, irqflags);
-
return 0;
}
+static int s3c_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req,
+ gfp_t gfp_flags)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hs = hs_ep->parent;
+ unsigned long flags = 0;
+ int ret = 0;
+
+ spin_lock_irqsave(&hs->lock, flags);
+ ret = s3c_hsotg_ep_queue(ep, req, gfp_flags);
+ spin_unlock_irqrestore(&hs->lock, flags);
+
+ return ret;
+}
+
static void s3c_hsotg_ep_free_request(struct usb_ep *ep,
struct usb_request *req)
{
@@ -1383,9 +1392,9 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
*/
if (hs_req->req.complete) {
- spin_unlock(&hs_ep->lock);
+ spin_unlock(&hsotg->lock);
hs_req->req.complete(&hs_ep->ep, &hs_req->req);
- spin_lock(&hs_ep->lock);
+ spin_lock(&hsotg->lock);
}
/*
@@ -1404,28 +1413,6 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
}
/**
- * s3c_hsotg_complete_request_lock - complete a request given to us (locked)
- * @hsotg: The device state.
- * @hs_ep: The endpoint the request was on.
- * @hs_req: The request to complete.
- * @result: The result code (0 => Ok, otherwise errno)
- *
- * See s3c_hsotg_complete_request(), but called with the endpoint's
- * lock held.
- */
-static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
- struct s3c_hsotg_ep *hs_ep,
- struct s3c_hsotg_req *hs_req,
- int result)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&hs_ep->lock, flags);
- s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
- spin_unlock_irqrestore(&hs_ep->lock, flags);
-}
-
-/**
* s3c_hsotg_rx_data - receive data from the FIFO for an endpoint
* @hsotg: The device state.
* @ep_idx: The endpoint index for the data
@@ -1444,6 +1431,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
int max_req;
int read_ptr;
+
if (!hs_req) {
u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx));
int ptr;
@@ -1459,8 +1447,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
return;
}
- spin_lock(&hs_ep->lock);
-
to_read = size;
read_ptr = hs_req->req.actual;
max_req = hs_req->req.length - read_ptr;
@@ -1487,8 +1473,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
* alignment of the data.
*/
readsl(fifo, hs_req->req.buf + read_ptr, to_read);
-
- spin_unlock(&hs_ep->lock);
}
/**
@@ -1609,7 +1593,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
s3c_hsotg_send_zlp(hsotg, hs_req);
}
- s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, result);
+ s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
}
/**
@@ -1864,7 +1848,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
/* Finish ZLP handling for IN EP0 transactions */
if (hsotg->eps[0].sent_zlp) {
dev_dbg(hsotg->dev, "zlp packet received\n");
- s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
+ s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
return;
}
@@ -1915,7 +1899,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
} else
- s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
+ s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
}
/**
@@ -2123,9 +2107,6 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
int result, bool force)
{
struct s3c_hsotg_req *req, *treq;
- unsigned long flags;
-
- spin_lock_irqsave(&ep->lock, flags);
list_for_each_entry_safe(req, treq, &ep->queue, queue) {
/*
@@ -2139,14 +2120,15 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
s3c_hsotg_complete_request(hsotg, ep, req,
result);
}
-
- spin_unlock_irqrestore(&ep->lock, flags);
}
#define call_gadget(_hs, _entry) \
if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
- (_hs)->driver && (_hs)->driver->_entry) \
- (_hs)->driver->_entry(&(_hs)->gadget);
+ (_hs)->driver && (_hs)->driver->_entry) { \
+ spin_unlock(&_hs->lock); \
+ (_hs)->driver->_entry(&(_hs)->gadget); \
+ spin_lock(&_hs->lock); \
+ }
/**
* s3c_hsotg_disconnect - disconnect service
@@ -2388,6 +2370,7 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
u32 gintsts;
u32 gintmsk;
+ spin_lock(&hsotg->lock);
irq_retry:
gintsts = readl(hsotg->regs + GINTSTS);
gintmsk = readl(hsotg->regs + GINTMSK);
@@ -2557,6 +2540,8 @@ irq_retry:
if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
goto irq_retry;
+ spin_unlock(&hsotg->lock);
+
return IRQ_HANDLED;
}
@@ -2604,7 +2589,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
__func__, epctrl, epctrl_reg);
- spin_lock_irqsave(&hs_ep->lock, flags);
+ spin_lock_irqsave(&hsotg->lock, flags);
epctrl &= ~(DxEPCTL_EPType_MASK | DxEPCTL_MPS_MASK);
epctrl |= DxEPCTL_MPS(mps);
@@ -2683,7 +2668,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
out:
- spin_unlock_irqrestore(&hs_ep->lock, flags);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
return ret;
}
@@ -2710,10 +2695,10 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
+ spin_lock_irqsave(&hsotg->lock, flags);
/* terminate all requests with shutdown */
kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
- spin_lock_irqsave(&hs_ep->lock, flags);
ctrl = readl(hsotg->regs + epctrl_reg);
ctrl &= ~DxEPCTL_EPEna;
@@ -2726,7 +2711,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
/* disable endpoint interrupts */
s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
- spin_unlock_irqrestore(&hs_ep->lock, flags);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
return 0;
}
@@ -2761,15 +2746,15 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
- spin_lock_irqsave(&hs_ep->lock, flags);
+ spin_lock_irqsave(&hs->lock, flags);
if (!on_list(hs_ep, hs_req)) {
- spin_unlock_irqrestore(&hs_ep->lock, flags);
+ spin_unlock_irqrestore(&hs->lock, flags);
return -EINVAL;
}
s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
- spin_unlock_irqrestore(&hs_ep->lock, flags);
+ spin_unlock_irqrestore(&hs->lock, flags);
return 0;
}
@@ -2784,15 +2769,12 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
struct s3c_hsotg *hs = hs_ep->parent;
int index = hs_ep->index;
- unsigned long irqflags;
u32 epreg;
u32 epctl;
u32 xfertype;
dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
- spin_lock_irqsave(&hs_ep->lock, irqflags);
-
/* write both IN and OUT control registers */
epreg = DIEPCTL(index);
@@ -2827,19 +2809,36 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
writel(epctl, hs->regs + epreg);
- spin_unlock_irqrestore(&hs_ep->lock, irqflags);
-
return 0;
}
+/**
+ * s3c_hsotg_ep_sethalt_lock - set halt on a given endpoint with lock held
+ * @ep: The endpoint to set halt.
+ * @value: Set or unset the halt.
+ */
+static int s3c_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
+{
+ struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+ struct s3c_hsotg *hs = hs_ep->parent;
+ unsigned long flags = 0;
+ int ret = 0;
+
+ spin_lock_irqsave(&hs->lock, flags);
+ ret = s3c_hsotg_ep_sethalt(ep, value);
+ spin_unlock_irqrestore(&hs->lock, flags);
+
+ return ret;
+}
+
static struct usb_ep_ops s3c_hsotg_ep_ops = {
.enable = s3c_hsotg_ep_enable,
.disable = s3c_hsotg_ep_disable,
.alloc_request = s3c_hsotg_ep_alloc_request,
.free_request = s3c_hsotg_ep_free_request,
- .queue = s3c_hsotg_ep_queue,
+ .queue = s3c_hsotg_ep_queue_lock,
.dequeue = s3c_hsotg_ep_dequeue,
- .set_halt = s3c_hsotg_ep_sethalt,
+ .set_halt = s3c_hsotg_ep_sethalt_lock,
/* note, don't believe we have any call for the fifo routines */
};
@@ -2954,6 +2953,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
driver->driver.bus = NULL;
hsotg->driver = driver;
hsotg->gadget.dev.driver = &driver->driver;
+ hsotg->gadget.dev.of_node = hsotg->dev->of_node;
hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask;
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
@@ -2964,9 +2964,6 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
goto err;
}
- s3c_hsotg_phy_enable(hsotg);
-
- s3c_hsotg_core_init(hsotg);
hsotg->last_rst = jiffies;
dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
return 0;
@@ -2988,6 +2985,7 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
struct s3c_hsotg *hsotg = to_hsotg(gadget);
+ unsigned long flags = 0;
int ep;
if (!hsotg)
@@ -3000,6 +2998,8 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
for (ep = 0; ep < hsotg->num_of_eps; ep++)
s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
+ spin_lock_irqsave(&hsotg->lock, flags);
+
s3c_hsotg_phy_disable(hsotg);
regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
@@ -3007,6 +3007,8 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
hsotg->gadget.dev.driver = NULL;
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
dev_info(hsotg->dev, "unregistered gadget driver '%s'\n",
driver->driver.name);
@@ -3024,10 +3026,40 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
return s3c_hsotg_read_frameno(to_hsotg(gadget));
}
+/**
+ * s3c_hsotg_pullup - connect/disconnect the USB PHY
+ * @gadget: The usb gadget state
+ * @is_on: Current state of the USB PHY
+ *
+ * Connect/Disconnect the USB PHY pullup
+ */
+static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct s3c_hsotg *hsotg = to_hsotg(gadget);
+ unsigned long flags = 0;
+
+ dev_dbg(hsotg->dev, "%s: is_in: %d\n", __func__, is_on);
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ if (is_on) {
+ s3c_hsotg_phy_enable(hsotg);
+ s3c_hsotg_core_init(hsotg);
+ } else {
+ s3c_hsotg_disconnect(hsotg);
+ s3c_hsotg_phy_disable(hsotg);
+ }
+
+ hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ return 0;
+}
+
static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
.get_frame = s3c_hsotg_gadget_getframe,
.udc_start = s3c_hsotg_udc_start,
.udc_stop = s3c_hsotg_udc_stop,
+ .pullup = s3c_hsotg_pullup,
};
/**
@@ -3063,8 +3095,6 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
INIT_LIST_HEAD(&hs_ep->queue);
INIT_LIST_HEAD(&hs_ep->ep.ep_list);
- spin_lock_init(&hs_ep->lock);
-
/* add to the list of endpoints known by the gadget driver */
if (epnum)
list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
@@ -3342,7 +3372,7 @@ static int ep_show(struct seq_file *seq, void *v)
seq_printf(seq, "request list (%p,%p):\n",
ep->queue.next, ep->queue.prev);
- spin_lock_irqsave(&ep->lock, flags);
+ spin_lock_irqsave(&hsotg->lock, flags);
list_for_each_entry(req, &ep->queue, queue) {
if (--show_limit < 0) {
@@ -3357,7 +3387,7 @@ static int ep_show(struct seq_file *seq, void *v)
req->req.actual, req->req.status);
}
- spin_unlock_irqrestore(&ep->lock, flags);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
return 0;
}
@@ -3477,7 +3507,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
return -EINVAL;
}
- hsotg = kzalloc(sizeof(struct s3c_hsotg), GFP_KERNEL);
+ hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL);
if (!hsotg) {
dev_err(dev, "cannot get memory\n");
return -ENOMEM;
@@ -3489,46 +3519,35 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
hsotg->clk = clk_get(&pdev->dev, "otg");
if (IS_ERR(hsotg->clk)) {
dev_err(dev, "cannot get otg clock\n");
- ret = PTR_ERR(hsotg->clk);
- goto err_mem;
+ return PTR_ERR(hsotg->clk);
}
platform_set_drvdata(pdev, hsotg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "cannot find register resource 0\n");
- ret = -EINVAL;
- goto err_clk;
- }
-
- hsotg->regs_res = request_mem_region(res->start, resource_size(res),
- dev_name(dev));
- if (!hsotg->regs_res) {
- dev_err(dev, "cannot reserve registers\n");
- ret = -ENOENT;
- goto err_clk;
- }
- hsotg->regs = ioremap(res->start, resource_size(res));
+ hsotg->regs = devm_request_and_ioremap(&pdev->dev, res);
if (!hsotg->regs) {
dev_err(dev, "cannot map registers\n");
ret = -ENXIO;
- goto err_regs_res;
+ goto err_clk;
}
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
dev_err(dev, "cannot find IRQ\n");
- goto err_regs;
+ goto err_clk;
}
+ spin_lock_init(&hsotg->lock);
+
hsotg->irq = ret;
- ret = request_irq(ret, s3c_hsotg_irq, 0, dev_name(dev), hsotg);
+ ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0,
+ dev_name(dev), hsotg);
if (ret < 0) {
dev_err(dev, "cannot claim IRQ\n");
- goto err_regs;
+ goto err_clk;
}
dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
@@ -3558,7 +3577,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
hsotg->supplies);
if (ret) {
dev_err(dev, "failed to request supplies: %d\n", ret);
- goto err_irq;
+ goto err_clk;
}
ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
@@ -3642,19 +3661,11 @@ err_ep_mem:
err_supplies:
s3c_hsotg_phy_disable(hsotg);
regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
-err_irq:
- free_irq(hsotg->irq, hsotg);
-err_regs:
- iounmap(hsotg->regs);
-
-err_regs_res:
- release_resource(hsotg->regs_res);
- kfree(hsotg->regs_res);
+
err_clk:
clk_disable_unprepare(hsotg->clk);
clk_put(hsotg->clk);
-err_mem:
- kfree(hsotg);
+
return ret;
}
@@ -3675,12 +3686,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
usb_gadget_unregister_driver(hsotg->driver);
}
- free_irq(hsotg->irq, hsotg);
- iounmap(hsotg->regs);
-
- release_resource(hsotg->regs_res);
- kfree(hsotg->regs_res);
-
s3c_hsotg_phy_disable(hsotg);
regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 236b271..e26a4e7 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -24,6 +24,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
@@ -1165,7 +1166,7 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
}
/* connect to bus through transceiver */
- if (hsudc->transceiver) {
+ if (!IS_ERR_OR_NULL(hsudc->transceiver)) {
ret = otg_set_peripheral(hsudc->transceiver->otg,
&hsudc->gadget);
if (ret) {
@@ -1220,7 +1221,7 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget,
s3c_hsudc_stop_activity(hsudc);
spin_unlock_irqrestore(&hsudc->lock, flags);
- if (hsudc->transceiver)
+ if (!IS_ERR_OR_NULL(hsudc->transceiver))
(void) otg_set_peripheral(hsudc->transceiver->otg, NULL);
disable_irq(hsudc->irq);
@@ -1249,7 +1250,7 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
if (!hsudc)
return -ENODEV;
- if (hsudc->transceiver)
+ if (!IS_ERR_OR_NULL(hsudc->transceiver))
return usb_phy_set_power(hsudc->transceiver, mA);
return -EOPNOTSUPP;
@@ -1282,7 +1283,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
hsudc->dev = dev;
hsudc->pd = pdev->dev.platform_data;
- hsudc->transceiver = usb_get_transceiver();
+ hsudc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++)
hsudc->supplies[i].supply = s3c_hsudc_supply_names[i];
@@ -1385,8 +1386,8 @@ err_irq:
err_remap:
release_mem_region(res->start, resource_size(res));
err_res:
- if (hsudc->transceiver)
- usb_put_transceiver(hsudc->transceiver);
+ if (!IS_ERR_OR_NULL(hsudc->transceiver))
+ usb_put_phy(hsudc->transceiver);
regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
err_supplies:
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 8081ca3..ae8b188 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -38,12 +38,6 @@
*/
/*
- * When FSG_BUFFHD_STATIC_BUFFER is defined when this file is included
- * the fsg_buffhd structure's buf field will be an array of FSG_BUFLEN
- * characters rather then a pointer to void.
- */
-
-/*
* When USB_GADGET_DEBUG_FILES is defined the module param num_buffers
* sets the number of pipeline buffers (length of the fsg_buffhd array).
* The valid range of num_buffers is: num >= 2 && num <= 4.
@@ -260,11 +254,7 @@ enum fsg_buffer_state {
};
struct fsg_buffhd {
-#ifdef FSG_BUFFHD_STATIC_BUFFER
- char buf[FSG_BUFLEN];
-#else
void *buf;
-#endif
enum fsg_buffer_state state;
struct fsg_buffhd *next;
@@ -627,6 +617,16 @@ static struct usb_gadget_strings fsg_stringtab = {
* the caller must own fsg->filesem for writing.
*/
+static void fsg_lun_close(struct fsg_lun *curlun)
+{
+ if (curlun->filp) {
+ LDBG(curlun, "close backing file\n");
+ fput(curlun->filp);
+ curlun->filp = NULL;
+ }
+}
+
+
static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
{
int ro;
@@ -636,6 +636,8 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
loff_t size;
loff_t num_sectors;
loff_t min_sectors;
+ unsigned int blkbits;
+ unsigned int blksize;
/* R/W if we can, R/O if we must */
ro = curlun->initially_ro;
@@ -680,17 +682,17 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
}
if (curlun->cdrom) {
- curlun->blksize = 2048;
- curlun->blkbits = 11;
+ blksize = 2048;
+ blkbits = 11;
} else if (inode->i_bdev) {
- curlun->blksize = bdev_logical_block_size(inode->i_bdev);
- curlun->blkbits = blksize_bits(curlun->blksize);
+ blksize = bdev_logical_block_size(inode->i_bdev);
+ blkbits = blksize_bits(blksize);
} else {
- curlun->blksize = 512;
- curlun->blkbits = 9;
+ blksize = 512;
+ blkbits = 9;
}
- num_sectors = size >> curlun->blkbits; /* File size in logic-block-size blocks */
+ num_sectors = size >> blkbits; /* File size in logic-block-size blocks */
min_sectors = 1;
if (curlun->cdrom) {
min_sectors = 300; /* Smallest track is 300 frames */
@@ -707,7 +709,12 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
goto out;
}
+ if (fsg_lun_is_open(curlun))
+ fsg_lun_close(curlun);
+
get_file(filp);
+ curlun->blksize = blksize;
+ curlun->blkbits = blkbits;
curlun->ro = ro;
curlun->filp = filp;
curlun->file_length = size;
@@ -721,16 +728,6 @@ out:
}
-static void fsg_lun_close(struct fsg_lun *curlun)
-{
- if (curlun->filp) {
- LDBG(curlun, "close backing file\n");
- fput(curlun->filp);
- curlun->filp = NULL;
- }
-}
-
-
/*-------------------------------------------------------------------------*/
/*
@@ -881,19 +878,17 @@ static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr,
if (count > 0 && buf[count-1] == '\n')
((char *) buf)[count-1] = 0; /* Ugh! */
- /* Eject current medium */
- down_write(filesem);
- if (fsg_lun_is_open(curlun)) {
- fsg_lun_close(curlun);
- curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
- }
-
/* Load new medium */
+ down_write(filesem);
if (count > 0 && buf[0]) {
+ /* fsg_lun_open() will close existing file if any. */
rc = fsg_lun_open(curlun, buf);
if (rc == 0)
curlun->unit_attention_data =
SS_NOT_READY_TO_READY_TRANSITION;
+ } else if (fsg_lun_is_open(curlun)) {
+ fsg_lun_close(curlun);
+ curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
}
up_write(filesem);
return (rc < 0 ? rc : count);
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index b9e1925..90e82e2 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -798,12 +798,6 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
SET_ETHTOOL_OPS(net, &ops);
- /* two kinds of host-initiated state changes:
- * - iff DATA transfer is active, carrier is "on"
- * - tx queueing enabled if open *and* carrier is "on"
- */
- netif_carrier_off(net);
-
dev->gadget = g;
SET_NETDEV_DEV(net, &g->dev);
SET_NETDEV_DEVTYPE(net, &gadget_type);
@@ -817,6 +811,12 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
INFO(dev, "HOST MAC %pM\n", dev->host_mac);
the_dev = dev;
+
+ /* two kinds of host-initiated state changes:
+ * - iff DATA transfer is active, carrier is "on"
+ * - tx queueing enabled if open *and* carrier is "on"
+ */
+ netif_carrier_off(net);
}
return status;
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index ca4e03a..93b0c11 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -153,9 +153,11 @@ struct uvc_device
/* Descriptors */
struct {
- const struct uvc_descriptor_header * const *control;
+ const struct uvc_descriptor_header * const *fs_control;
+ const struct uvc_descriptor_header * const *ss_control;
const struct uvc_descriptor_header * const *fs_streaming;
const struct uvc_descriptor_header * const *hs_streaming;
+ const struct uvc_descriptor_header * const *ss_streaming;
} desc;
unsigned int control_intf;
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 668fe12..120e134 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -272,7 +272,15 @@ static const struct uvc_color_matching_descriptor uvc_color_matching = {
.bMatrixCoefficients = 4,
};
-static const struct uvc_descriptor_header * const uvc_control_cls[] = {
+static const struct uvc_descriptor_header * const uvc_fs_control_cls[] = {
+ (const struct uvc_descriptor_header *) &uvc_control_header,
+ (const struct uvc_descriptor_header *) &uvc_camera_terminal,
+ (const struct uvc_descriptor_header *) &uvc_processing,
+ (const struct uvc_descriptor_header *) &uvc_output_terminal,
+ NULL,
+};
+
+static const struct uvc_descriptor_header * const uvc_ss_control_cls[] = {
(const struct uvc_descriptor_header *) &uvc_control_header,
(const struct uvc_descriptor_header *) &uvc_camera_terminal,
(const struct uvc_descriptor_header *) &uvc_processing,
@@ -304,6 +312,18 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
NULL,
};
+static const struct uvc_descriptor_header * const uvc_ss_streaming_cls[] = {
+ (const struct uvc_descriptor_header *) &uvc_input_header,
+ (const struct uvc_descriptor_header *) &uvc_format_yuv,
+ (const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
+ (const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+ (const struct uvc_descriptor_header *) &uvc_format_mjpg,
+ (const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
+ (const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
+ (const struct uvc_descriptor_header *) &uvc_color_matching,
+ NULL,
+};
+
/* --------------------------------------------------------------------------
* USB configuration
*/
@@ -311,8 +331,9 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
static int __init
webcam_config_bind(struct usb_configuration *c)
{
- return uvc_bind_config(c, uvc_control_cls, uvc_fs_streaming_cls,
- uvc_hs_streaming_cls);
+ return uvc_bind_config(c, uvc_fs_control_cls, uvc_ss_control_cls,
+ uvc_fs_streaming_cls, uvc_hs_streaming_cls,
+ uvc_ss_streaming_cls);
}
static struct usb_configuration webcam_config_driver = {
@@ -373,7 +394,7 @@ static struct usb_composite_driver webcam_driver = {
.name = "g_webcam",
.dev = &webcam_device_descriptor,
.strings = webcam_device_strings,
- .max_speed = USB_SPEED_HIGH,
+ .max_speed = USB_SPEED_SUPER,
.unbind = webcam_unbind,
};