diff options
author | Tony Lindgren <tony@atomide.com> | 2015-10-28 17:16:04 (GMT) |
---|---|---|
committer | Tony Lindgren <tony@atomide.com> | 2015-10-28 17:16:04 (GMT) |
commit | 8f2279d5d908119a08e906be1c6b69c744d0c379 (patch) | |
tree | 9375149660aed82c465c47313082ff98c33df3e1 /drivers/usb/musb/omap2430.c | |
parent | 1bd5dfe41b994a6e793363894befef76626965a9 (diff) | |
download | linux-8f2279d5d908119a08e906be1c6b69c744d0c379.tar.xz |
usb: musb: omap2430: Fix regression caused by driver core change
Commit ddef08dd00f5 ("Driver core: wakeup the parent device before trying
probe") started automatically ensuring the parent device is enabled when
the child gets probed.
This however caused a regression for MUSB omap2430 interface as the
runtime PM for the parent device needs the child initialized to access
the MUSB hardware registers.
Let's delay the enabling of PM runtime for the parent until the child
has been properly initialized as suggested in an earlier patch by
Grygorii Strashko <grygorii.strashko@ti.com>.
In addition to delaying pm_runtime_enable, we now also need to make sure
the parent is enabled during omap2430_musb_init. We also want to propagate
an error from omap2430_runtime_resume if struct musb is not initialized.
Note that we use pm_runtime_put_noidle here for both the child and parent
to prevent an extra runtime_suspend/resume cycle.
Let's also add some comments to avoid confusion between the
two different devices.
Fixes: ddef08dd00f5 ("Driver core: wakeup the parent device before
trying probe")
Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'drivers/usb/musb/omap2430.c')
-rw-r--r-- | drivers/usb/musb/omap2430.c | 29 |
1 files changed, 23 insertions, 6 deletions
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 70f2b8a..1bd9232 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -391,9 +391,20 @@ static int omap2430_musb_init(struct musb *musb) } musb->isr = omap2430_musb_interrupt; + /* + * Enable runtime PM for musb parent (this driver). We can't + * do it earlier as struct musb is not yet allocated and we + * need to touch the musb registers for runtime PM. + */ + pm_runtime_enable(glue->dev); + status = pm_runtime_get_sync(glue->dev); + if (status < 0) + goto err1; + status = pm_runtime_get_sync(dev); if (status < 0) { dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status); + pm_runtime_put_sync(glue->dev); goto err1; } @@ -426,6 +437,7 @@ static int omap2430_musb_init(struct musb *musb) phy_power_on(musb->phy); pm_runtime_put_noidle(musb->controller); + pm_runtime_put_noidle(glue->dev); return 0; err1: @@ -626,7 +638,11 @@ static int omap2430_probe(struct platform_device *pdev) goto err2; } - pm_runtime_enable(&pdev->dev); + /* + * Note that we cannot enable PM runtime yet for this + * driver as we need struct musb initialized first. + * See omap2430_musb_init above. + */ ret = platform_device_add(musb); if (ret) { @@ -675,11 +691,12 @@ static int omap2430_runtime_resume(struct device *dev) struct omap2430_glue *glue = dev_get_drvdata(dev); struct musb *musb = glue_to_musb(glue); - if (musb) { - omap2430_low_level_init(musb); - musb_writel(musb->mregs, OTG_INTERFSEL, - musb->context.otg_interfsel); - } + if (!musb) + return -EPROBE_DEFER; + + omap2430_low_level_init(musb); + musb_writel(musb->mregs, OTG_INTERFSEL, + musb->context.otg_interfsel); return 0; } |