Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big set of USB and PHY patches for 3.19-rc1.

  The normal churn in the USB gadget area is in here, as well as xhci
  and other individual USB driver updates.  The PHY tree is also in
  here, as there were dependancies on the USB tree.

  All of these have been in linux-next"

* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
  arm: omap3: twl: remove usb phy init data
  usbip: fix error handling in stub_probe()
  usb: gadget: udc: missing curly braces
  USB: mos7720: delete some unneeded code
  wusb: replace memset by memzero_explicit
  usbip: remove unneeded structure
  usb: xhci: fix comment for PORT_DEV_REMOVE
  xhci: don't use the same variable for stopped and halted rings current TD
  xhci: clear extra bits from slot context when setting max exit latency
  xhci: cleanup finish_td function
  USB: adutux: NULL dereferences on disconnect
  usb: chipidea: fix platform_no_drv_owner.cocci warnings
  usb: chipidea: Fixed a few typos in comments
  Documentation: bindings: add doc for the USB2 ChipIdea USB driver
  usb: chipidea: add a usb2 driver for ci13xxx
  usb: chipidea: fix phy handling
  usb: chipidea: remove duplicate dev_set_drvdata for host_start
  usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
  usb: chipidea: add controller reset API
  usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
  ...

1 files changed, 77 insertions, 25 deletions

diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 2daa779..3a5ffd5 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -126,6 +126,52 @@ static void tusb_wbus_quirk(struct musb *musb, int enabled)
 	}
 }
 
+static u32 tusb_fifo_offset(u8 epnum)
+{
+	return 0x200 + (epnum * 0x20);
+}
+
+static u32 tusb_ep_offset(u8 epnum, u16 offset)
+{
+	return 0x10 + offset;
+}
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+static void tusb_ep_select(void __iomem *mbase, u8 epnum)
+{
+	musb_writeb(mbase, MUSB_INDEX, epnum);
+}
+
+/*
+ * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
+ */
+static u8 tusb_readb(const void __iomem *addr, unsigned offset)
+{
+	u16 tmp;
+	u8 val;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		val = (tmp >> 8);
+	else
+		val = tmp & 0xff;
+
+	return val;
+}
+
+static void tusb_writeb(void __iomem *addr, unsigned offset, u8 data)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		tmp = (data << 8) | (tmp & 0xff);
+	else
+		tmp = (tmp & 0xff00) | data;
+
+	__raw_writew(tmp, addr + (offset & ~1));
+}
+
 /*
  * TUSB 6010 may use a parallel bus that doesn't support byte ops;
  * so both loading and unloading FIFOs need explicit byte counts.
@@ -173,7 +219,7 @@ static inline void tusb_fifo_read_unaligned(void __iomem *fifo,
 	}
 }
 
-void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
+static void tusb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
 {
 	struct musb *musb = hw_ep->musb;
 	void __iomem	*ep_conf = hw_ep->conf;
@@ -223,7 +269,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
 		tusb_fifo_write_unaligned(fifo, buf, len);
 }
 
-void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
+static void tusb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
 {
 	struct musb *musb = hw_ep->musb;
 	void __iomem	*ep_conf = hw_ep->conf;
@@ -415,13 +461,13 @@ static void musb_do_idle(unsigned long _musb)
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	switch (musb->xceiv->state) {
+	switch (musb->xceiv->otg->state) {
 	case OTG_STATE_A_WAIT_BCON:
 		if ((musb->a_wait_bcon != 0)
 			&& (musb->idle_timeout == 0
 				|| time_after(jiffies, musb->idle_timeout))) {
 			dev_dbg(musb->controller, "Nothing connected %s, turning off VBUS\n",
-					usb_otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->otg->state));
 		}
 		/* FALLTHROUGH */
 	case OTG_STATE_A_IDLE:
@@ -474,9 +520,9 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 
 	/* Never idle if active, or when VBUS timeout is not set as host */
 	if (musb->is_active || ((musb->a_wait_bcon == 0)
-			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
+			&& (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
-			usb_otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->otg->state));
 		del_timer(&musb_idle_timer);
 		last_timer = jiffies;
 		return;
@@ -493,7 +539,7 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 	last_timer = timeout;
 
 	dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
-		usb_otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->otg->state),
 		(unsigned long)jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&musb_idle_timer, timeout);
 }
@@ -524,7 +570,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 	if (is_on) {
 		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
 		otg->default_a = 1;
-		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
 		devctl |= MUSB_DEVCTL_SESSION;
 
 		conf |= TUSB_DEV_CONF_USB_HOST_MODE;
@@ -537,16 +583,16 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 		/* If ID pin is grounded, we want to be a_idle */
 		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
 		if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
-			switch (musb->xceiv->state) {
+			switch (musb->xceiv->otg->state) {
 			case OTG_STATE_A_WAIT_VRISE:
 			case OTG_STATE_A_WAIT_BCON:
-				musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+				musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
 				break;
 			case OTG_STATE_A_WAIT_VFALL:
-				musb->xceiv->state = OTG_STATE_A_IDLE;
+				musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 				break;
 			default:
-				musb->xceiv->state = OTG_STATE_A_IDLE;
+				musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 			}
 			musb->is_active = 0;
 			otg->default_a = 1;
@@ -554,7 +600,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 		} else {
 			musb->is_active = 0;
 			otg->default_a = 0;
-			musb->xceiv->state = OTG_STATE_B_IDLE;
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
 			MUSB_DEV_MODE(musb);
 		}
 
@@ -569,7 +615,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
 	dev_dbg(musb->controller, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
-		usb_otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->otg->state),
 		musb_readb(musb->mregs, MUSB_DEVCTL),
 		musb_readl(tbase, TUSB_DEV_OTG_STAT),
 		conf, prcm);
@@ -668,23 +714,23 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 
 			if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
 				dev_dbg(musb->controller, "Forcing disconnect (no interrupt)\n");
-				if (musb->xceiv->state != OTG_STATE_B_IDLE) {
+				if (musb->xceiv->otg->state != OTG_STATE_B_IDLE) {
 					/* INTR_DISCONNECT can hide... */
-					musb->xceiv->state = OTG_STATE_B_IDLE;
+					musb->xceiv->otg->state = OTG_STATE_B_IDLE;
 					musb->int_usb |= MUSB_INTR_DISCONNECT;
 				}
 				musb->is_active = 0;
 			}
 			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
-				usb_otg_state_string(musb->xceiv->state), otg_stat);
+				usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
 			idle_timeout = jiffies + (1 * HZ);
 			schedule_work(&musb->irq_work);
 
 		} else /* A-dev state machine */ {
 			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
-				usb_otg_state_string(musb->xceiv->state), otg_stat);
+				usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
 
-			switch (musb->xceiv->state) {
+			switch (musb->xceiv->otg->state) {
 			case OTG_STATE_A_IDLE:
 				dev_dbg(musb->controller, "Got SRP, turning on VBUS\n");
 				musb_platform_set_vbus(musb, 1);
@@ -731,9 +777,9 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 		u8	devctl;
 
 		dev_dbg(musb->controller, "%s timer, %03x\n",
-			usb_otg_state_string(musb->xceiv->state), otg_stat);
+			usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
 
-		switch (musb->xceiv->state) {
+		switch (musb->xceiv->otg->state) {
 		case OTG_STATE_A_WAIT_VRISE:
 			/* VBUS has probably been valid for a while now,
 			 * but may well have bounced out of range a bit
@@ -745,7 +791,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 					dev_dbg(musb->controller, "devctl %02x\n", devctl);
 					break;
 				}
-				musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+				musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
 				musb->is_active = 0;
 				idle_timeout = jiffies
 					+ msecs_to_jiffies(musb->a_wait_bcon);
@@ -1135,9 +1181,17 @@ static int tusb_musb_exit(struct musb *musb)
 }
 
 static const struct musb_platform_ops tusb_ops = {
+	.quirks		= MUSB_IN_TUSB,
 	.init		= tusb_musb_init,
 	.exit		= tusb_musb_exit,
 
+	.ep_offset	= tusb_ep_offset,
+	.ep_select	= tusb_ep_select,
+	.fifo_offset	= tusb_fifo_offset,
+	.readb		= tusb_readb,
+	.writeb		= tusb_writeb,
+	.read_fifo	= tusb_read_fifo,
+	.write_fifo	= tusb_write_fifo,
 	.enable		= tusb_musb_enable,
 	.disable	= tusb_musb_disable,
 
@@ -1164,10 +1218,8 @@ static int tusb_probe(struct platform_device *pdev)
 	int				ret;
 
 	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
-	if (!glue) {
-		dev_err(&pdev->dev, "failed to allocate glue context\n");
+	if (!glue)
 		return -ENOMEM;
-	}
 
 	glue->dev			= &pdev->dev;