Merge tag 'v3.7-rc7' into next/cleanup

Merging in mainline back to next/cleanup since it has collected a few
conflicts between fixes going upstream and some of the cleanup patches.
Git doesn't auto-resolve some of them, and they're mostly noise so let's
take care of it locally.

Conflicts are in:
	arch/arm/mach-omap2/omap_hwmod_44xx_data.c
	arch/arm/plat-omap/i2c.c
	drivers/video/omap2/dss/dss.c

Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 27 insertions, 5 deletions

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d0b87e7..b6b84da 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -707,11 +707,12 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 		fifo_count = musb_readw(epio, MUSB_RXCOUNT);
 
 		/*
-		 *  use mode 1 only if we expect data of at least ep packet_sz
-		 *  and have not yet received a short packet
+		 * Enable Mode 1 on RX transfers only when short_not_ok flag
+		 * is set. Currently short_not_ok flag is set only from
+		 * file_storage and f_mass_storage drivers
 		 */
-		if ((request->length - request->actual >= musb_ep->packet_sz) &&
-			(fifo_count >= musb_ep->packet_sz))
+
+		if (request->short_not_ok && fifo_count == musb_ep->packet_sz)
 			use_mode_1 = 1;
 		else
 			use_mode_1 = 0;
@@ -727,6 +728,27 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				c = musb->dma_controller;
 				channel = musb_ep->dma;
 
+	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+	 * mode 0 only. So we do not get endpoint interrupts due to DMA
+	 * completion. We only get interrupts from DMA controller.
+	 *
+	 * We could operate in DMA mode 1 if we knew the size of the tranfer
+	 * in advance. For mass storage class, request->length = what the host
+	 * sends, so that'd work.  But for pretty much everything else,
+	 * request->length is routinely more than what the host sends. For
+	 * most these gadgets, end of is signified either by a short packet,
+	 * or filling the last byte of the buffer.  (Sending extra data in
+	 * that last pckate should trigger an overflow fault.)  But in mode 1,
+	 * we don't get DMA completion interrupt for short packets.
+	 *
+	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+	 * to get endpoint interrupt on every DMA req, but that didn't seem
+	 * to work reliably.
+	 *
+	 * REVISIT an updated g_file_storage can set req->short_not_ok, which
+	 * then becomes usable as a runtime "use mode 1" hint...
+	 */
+
 				/* Experimental: Mode1 works with mass storage use cases */
 				if (use_mode_1) {
 					csr |= MUSB_RXCSR_AUTOCLEAR;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index d62a91f..0e62f50 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -65,7 +65,7 @@ static int __devinit ux500_probe(struct platform_device *pdev)
 	struct platform_device		*musb;
 	struct ux500_glue		*glue;
 	struct clk			*clk;
-
+	int				musbid;
 	int				ret = -ENOMEM;
 
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);