summaryrefslogtreecommitdiff
path: root/drivers/usb/phy
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-03 16:11:20 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-03 16:11:20 (GMT)
commite5c4ecdc55b6d824365ba7964bcd3185223f9688 (patch)
tree405556c9fe703094dd0fc07bc89d9a2fdb5ee525 /drivers/usb/phy
parent49eb7b0750d9483c74e9c14ae6ea1e9d62481c3c (diff)
parent4a95b1fce97756d0333f8232eb7ed6974e93b054 (diff)
downloadlinux-e5c4ecdc55b6d824365ba7964bcd3185223f9688.tar.xz
Merge tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into next
Pull USB driver updates from Greg KH: "Here is the big USB driver pull request for 3.16-rc1. Nothing huge here, but lots of little things in the USB core, and in lots of drivers. Hopefully the USB power management will be work better now that it has been reworked to do per-port power control dynamically. There's also a raft of gadget driver updates and fixes, CONFIG_USB_DEBUG is finally gone now that everything has been converted over to the dynamic debug inteface, the last hold-out drivers were cleaned up and the config option removed. There were also other minor things all through the drivers/usb/ tree, the shortlog shows this pretty well. All have been in linux-next, including the very last patch, which came from linux-next to fix a build issue on some platforms" * tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits) usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y USB: orinoco_usb: remove CONFIG_USB_DEBUG support USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support USB: media: streamzap: remove CONFIG_USB_DEBUG USB: media: redrat3: remove CONFIG_USB_DEBUG usage USB: media: redrat3: remove unneeded tracing macro usb: qcserial: add additional Sierra Wireless QMI devices usb: host: max3421-hcd: Use module_spi_driver usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue() usb: qcserial: add Netgear AirCard 341U Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2 usb: host: xhci-plat: add xhci_plat_start() usb: host: max3421-hcd: Fix potential NULL urb dereference Revert "usb: gadget: net2280: Add support for PLX USB338X" USB: usbip: remove CONFIG_USB_DEBUG reference USB: remove CONFIG_USB_DEBUG from defconfig files usb: resume child device when port is powered on usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y ...
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r--drivers/usb/phy/Kconfig27
-rw-r--r--drivers/usb/phy/Makefile2
-rw-r--r--drivers/usb/phy/phy-am335x.c4
-rw-r--r--drivers/usb/phy/phy-fsm-usb.c366
-rw-r--r--drivers/usb/phy/phy-generic.c65
-rw-r--r--drivers/usb/phy/phy-generic.h8
-rw-r--r--drivers/usb/phy/phy-keystone.c4
-rw-r--r--drivers/usb/phy/phy-msm-usb.c702
-rw-r--r--drivers/usb/phy/phy-mv-u3d-usb.c338
-rw-r--r--drivers/usb/phy/phy-mv-u3d-usb.h105
-rw-r--r--drivers/usb/phy/phy-ulpi.c1
11 files changed, 441 insertions, 1181 deletions
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 416e0c8..e253fa0 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -6,15 +6,6 @@ menu "USB Physical Layer drivers"
config USB_PHY
def_bool n
-config USB_OTG_FSM
- tristate "USB 2.0 OTG FSM implementation"
- depends on USB
- select USB_OTG
- select USB_PHY
- help
- Implements OTG Final State Machine as specified in On-The-Go
- and Embedded Host Supplement to the USB Revision 2.0 Specification.
-
#
# USB Transceiver Drivers
#
@@ -59,14 +50,6 @@ config KEYSTONE_USB_PHY
interface to interact with USB 2.0 and USB 3.0 PHY that is part
of the Keystone SOC.
-config MV_U3D_PHY
- bool "Marvell USB 3.0 PHY controller Driver"
- depends on CPU_MMP3
- select USB_PHY
- help
- Enable this to support Marvell USB 3.0 phy controller for Marvell
- SoC.
-
config NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
select USB_PHY
@@ -171,11 +154,12 @@ config USB_ISP1301
module will be called phy-isp1301.
config USB_MSM_OTG
- tristate "OTG support for Qualcomm on-chip USB controller"
- depends on (USB || USB_GADGET) && ARCH_MSM
+ tristate "Qualcomm on-chip USB OTG controller support"
+ depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM || COMPILE_TEST)
+ depends on RESET_CONTROLLER
select USB_PHY
help
- Enable this to support the USB OTG transceiver on MSM chips. It
+ Enable this to support the USB OTG transceiver on Qualcomm chips. It
handles PHY initialization, clock management, and workarounds
required after resetting the hardware and power management.
This driver is required even for peripheral only or host only
@@ -208,6 +192,7 @@ config USB_MXS_PHY
config USB_RCAR_PHY
tristate "Renesas R-Car USB PHY support"
depends on USB || USB_GADGET
+ depends on ARCH_R8A7778 || ARCH_R8A7779 || COMPILE_TEST
select USB_PHY
help
Say Y here to add support for the Renesas R-Car USB common PHY driver.
@@ -232,7 +217,7 @@ config USB_RCAR_GEN2_PHY
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
- depends on ARM
+ depends on ARM || ARM64
help
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index f8fa719..24a9133 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -3,14 +3,12 @@
#
obj-$(CONFIG_USB_PHY) += phy.o
obj-$(CONFIG_OF) += of.o
-obj-$(CONFIG_USB_OTG_FSM) += phy-fsm-usb.o
# transceiver drivers, keep the list sorted
obj-$(CONFIG_AB8500_USB) += phy-ab8500-usb.o
obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb.o
obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o
-obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o
obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o
obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index 12fc346..585e50c 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -2,7 +2,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/otg.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
@@ -13,7 +13,7 @@
#include "phy-generic.h"
struct am335x_phy {
- struct usb_phy_gen_xceiv usb_phy_gen;
+ struct usb_phy_generic usb_phy_gen;
struct phy_control *phy_ctrl;
int id;
};
diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c
deleted file mode 100644
index d03fadd..0000000
--- a/drivers/usb/phy/phy-fsm-usb.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * OTG Finite State Machine from OTG spec
- *
- * Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
- *
- * Author: Li Yang <LeoLi@freescale.com>
- * Jerry Huang <Chang-Ming.Huang@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/usb.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/otg-fsm.h>
-
-/* Change USB protocol when there is a protocol change */
-static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
-{
- int ret = 0;
-
- if (fsm->protocol != protocol) {
- VDBG("Changing role fsm->protocol= %d; new protocol= %d\n",
- fsm->protocol, protocol);
- /* stop old protocol */
- if (fsm->protocol == PROTO_HOST)
- ret = otg_start_host(fsm, 0);
- else if (fsm->protocol == PROTO_GADGET)
- ret = otg_start_gadget(fsm, 0);
- if (ret)
- return ret;
-
- /* start new protocol */
- if (protocol == PROTO_HOST)
- ret = otg_start_host(fsm, 1);
- else if (protocol == PROTO_GADGET)
- ret = otg_start_gadget(fsm, 1);
- if (ret)
- return ret;
-
- fsm->protocol = protocol;
- return 0;
- }
-
- return 0;
-}
-
-static int state_changed;
-
-/* Called when leaving a state. Do state clean up jobs here */
-static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
-{
- switch (old_state) {
- case OTG_STATE_B_IDLE:
- otg_del_timer(fsm, B_SE0_SRP);
- fsm->b_se0_srp = 0;
- fsm->adp_sns = 0;
- fsm->adp_prb = 0;
- break;
- case OTG_STATE_B_SRP_INIT:
- fsm->data_pulse = 0;
- fsm->b_srp_done = 0;
- break;
- case OTG_STATE_B_PERIPHERAL:
- break;
- case OTG_STATE_B_WAIT_ACON:
- otg_del_timer(fsm, B_ASE0_BRST);
- fsm->b_ase0_brst_tmout = 0;
- break;
- case OTG_STATE_B_HOST:
- break;
- case OTG_STATE_A_IDLE:
- fsm->adp_prb = 0;
- break;
- case OTG_STATE_A_WAIT_VRISE:
- otg_del_timer(fsm, A_WAIT_VRISE);
- fsm->a_wait_vrise_tmout = 0;
- break;
- case OTG_STATE_A_WAIT_BCON:
- otg_del_timer(fsm, A_WAIT_BCON);
- fsm->a_wait_bcon_tmout = 0;
- break;
- case OTG_STATE_A_HOST:
- otg_del_timer(fsm, A_WAIT_ENUM);
- break;
- case OTG_STATE_A_SUSPEND:
- otg_del_timer(fsm, A_AIDL_BDIS);
- fsm->a_aidl_bdis_tmout = 0;
- fsm->a_suspend_req_inf = 0;
- break;
- case OTG_STATE_A_PERIPHERAL:
- otg_del_timer(fsm, A_BIDL_ADIS);
- fsm->a_bidl_adis_tmout = 0;
- break;
- case OTG_STATE_A_WAIT_VFALL:
- otg_del_timer(fsm, A_WAIT_VFALL);
- fsm->a_wait_vfall_tmout = 0;
- otg_del_timer(fsm, A_WAIT_VRISE);
- break;
- case OTG_STATE_A_VBUS_ERR:
- break;
- default:
- break;
- }
-}
-
-/* Called when entering a state */
-static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
-{
- state_changed = 1;
- if (fsm->otg->phy->state == new_state)
- return 0;
- VDBG("Set state: %s\n", usb_otg_state_string(new_state));
- otg_leave_state(fsm, fsm->otg->phy->state);
- switch (new_state) {
- case OTG_STATE_B_IDLE:
- otg_drv_vbus(fsm, 0);
- otg_chrg_vbus(fsm, 0);
- otg_loc_conn(fsm, 0);
- otg_loc_sof(fsm, 0);
- /*
- * Driver is responsible for starting ADP probing
- * if ADP sensing times out.
- */
- otg_start_adp_sns(fsm);
- otg_set_protocol(fsm, PROTO_UNDEF);
- otg_add_timer(fsm, B_SE0_SRP);
- break;
- case OTG_STATE_B_SRP_INIT:
- otg_start_pulse(fsm);
- otg_loc_sof(fsm, 0);
- otg_set_protocol(fsm, PROTO_UNDEF);
- otg_add_timer(fsm, B_SRP_FAIL);
- break;
- case OTG_STATE_B_PERIPHERAL:
- otg_chrg_vbus(fsm, 0);
- otg_loc_conn(fsm, 1);
- otg_loc_sof(fsm, 0);
- otg_set_protocol(fsm, PROTO_GADGET);
- break;
- case OTG_STATE_B_WAIT_ACON:
- otg_chrg_vbus(fsm, 0);
- otg_loc_conn(fsm, 0);
- otg_loc_sof(fsm, 0);
- otg_set_protocol(fsm, PROTO_HOST);
- otg_add_timer(fsm, B_ASE0_BRST);
- fsm->a_bus_suspend = 0;
- break;
- case OTG_STATE_B_HOST:
- otg_chrg_vbus(fsm, 0);
- otg_loc_conn(fsm, 0);
- otg_loc_sof(fsm, 1);
- otg_set_protocol(fsm, PROTO_HOST);
- usb_bus_start_enum(fsm->otg->host,
- fsm->otg->host->otg_port);
- break;
- case OTG_STATE_A_IDLE:
- otg_drv_vbus(fsm, 0);
- otg_chrg_vbus(fsm, 0);
- otg_loc_conn(fsm, 0);
- otg_loc_sof(fsm, 0);
- otg_start_adp_prb(fsm);
- otg_set_protocol(fsm, PROTO_HOST);
- break;
- case OTG_STATE_A_WAIT_VRISE:
- otg_drv_vbus(fsm, 1);
- otg_loc_conn(fsm, 0);
- otg_loc_sof(fsm, 0);
- otg_set_protocol(fsm, PROTO_HOST);
- otg_add_timer(fsm, A_WAIT_VRISE);
- break;
- case OTG_STATE_A_WAIT_BCON:
- otg_drv_vbus(fsm, 1);
- otg_loc_conn(fsm, 0);
- otg_loc_sof(fsm, 0);
- otg_set_protocol(fsm, PROTO_HOST);
- otg_add_timer(fsm, A_WAIT_BCON);
- break;
- case OTG_STATE_A_HOST:
- otg_drv_vbus(fsm, 1);
- otg_loc_conn(fsm, 0);
- otg_loc_sof(fsm, 1);
- otg_set_protocol(fsm, PROTO_HOST);
- /*
- * When HNP is triggered while a_bus_req = 0, a_host will
- * suspend too fast to complete a_set_b_hnp_en
- */
- if (!fsm->a_bus_req || fsm->a_suspend_req_inf)
- otg_add_timer(fsm, A_WAIT_ENUM);
- break;
- case OTG_STATE_A_SUSPEND:
- otg_drv_vbus(fsm, 1);
- otg_loc_conn(fsm, 0);
- otg_loc_sof(fsm, 0);
- otg_set_protocol(fsm, PROTO_HOST);
- otg_add_timer(fsm, A_AIDL_BDIS);
-
- break;
- case OTG_STATE_A_PERIPHERAL:
- otg_loc_conn(fsm, 1);
- otg_loc_sof(fsm, 0);
- otg_set_protocol(fsm, PROTO_GADGET);
- otg_drv_vbus(fsm, 1);
- otg_add_timer(fsm, A_BIDL_ADIS);
- break;
- case OTG_STATE_A_WAIT_VFALL:
- otg_drv_vbus(fsm, 0);
- otg_loc_conn(fsm, 0);
- otg_loc_sof(fsm, 0);
- otg_set_protocol(fsm, PROTO_HOST);
- otg_add_timer(fsm, A_WAIT_VFALL);
- break;
- case OTG_STATE_A_VBUS_ERR:
- otg_drv_vbus(fsm, 0);
- otg_loc_conn(fsm, 0);
- otg_loc_sof(fsm, 0);
- otg_set_protocol(fsm, PROTO_UNDEF);
- break;
- default:
- break;
- }
-
- fsm->otg->phy->state = new_state;
- return 0;
-}
-
-/* State change judgement */
-int otg_statemachine(struct otg_fsm *fsm)
-{
- enum usb_otg_state state;
-
- mutex_lock(&fsm->lock);
-
- state = fsm->otg->phy->state;
- state_changed = 0;
- /* State machine state change judgement */
-
- switch (state) {
- case OTG_STATE_UNDEFINED:
- VDBG("fsm->id = %d\n", fsm->id);
- if (fsm->id)
- otg_set_state(fsm, OTG_STATE_B_IDLE);
- else
- otg_set_state(fsm, OTG_STATE_A_IDLE);
- break;
- case OTG_STATE_B_IDLE:
- if (!fsm->id)
- otg_set_state(fsm, OTG_STATE_A_IDLE);
- else if (fsm->b_sess_vld && fsm->otg->gadget)
- otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
- else if ((fsm->b_bus_req || fsm->adp_change || fsm->power_up) &&
- fsm->b_ssend_srp && fsm->b_se0_srp)
- otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
- break;
- case OTG_STATE_B_SRP_INIT:
- if (!fsm->id || fsm->b_srp_done)
- otg_set_state(fsm, OTG_STATE_B_IDLE);
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (!fsm->id || !fsm->b_sess_vld)
- otg_set_state(fsm, OTG_STATE_B_IDLE);
- else if (fsm->b_bus_req && fsm->otg->
- gadget->b_hnp_enable && fsm->a_bus_suspend)
- otg_set_state(fsm, OTG_STATE_B_WAIT_ACON);
- break;
- case OTG_STATE_B_WAIT_ACON:
- if (fsm->a_conn)
- otg_set_state(fsm, OTG_STATE_B_HOST);
- else if (!fsm->id || !fsm->b_sess_vld)
- otg_set_state(fsm, OTG_STATE_B_IDLE);
- else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) {
- fsm->b_ase0_brst_tmout = 0;
- otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
- }
- break;
- case OTG_STATE_B_HOST:
- if (!fsm->id || !fsm->b_sess_vld)
- otg_set_state(fsm, OTG_STATE_B_IDLE);
- else if (!fsm->b_bus_req || !fsm->a_conn || fsm->test_device)
- otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
- break;
- case OTG_STATE_A_IDLE:
- if (fsm->id)
- otg_set_state(fsm, OTG_STATE_B_IDLE);
- else if (!fsm->a_bus_drop && (fsm->a_bus_req ||
- fsm->a_srp_det || fsm->adp_change || fsm->power_up))
- otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
- break;
- case OTG_STATE_A_WAIT_VRISE:
- if (fsm->a_vbus_vld)
- otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
- else if (fsm->id || fsm->a_bus_drop ||
- fsm->a_wait_vrise_tmout)
- otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
- break;
- case OTG_STATE_A_WAIT_BCON:
- if (!fsm->a_vbus_vld)
- otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
- else if (fsm->b_conn)
- otg_set_state(fsm, OTG_STATE_A_HOST);
- else if (fsm->id || fsm->a_bus_drop || fsm->a_wait_bcon_tmout)
- otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
- break;
- case OTG_STATE_A_HOST:
- if (fsm->id || fsm->a_bus_drop)
- otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
- else if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) &&
- fsm->otg->host->b_hnp_enable)
- otg_set_state(fsm, OTG_STATE_A_SUSPEND);
- else if (!fsm->b_conn)
- otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
- else if (!fsm->a_vbus_vld)
- otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
- break;
- case OTG_STATE_A_SUSPEND:
- if (!fsm->b_conn && fsm->otg->host->b_hnp_enable)
- otg_set_state(fsm, OTG_STATE_A_PERIPHERAL);
- else if (!fsm->b_conn && !fsm->otg->host->b_hnp_enable)
- otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
- else if (fsm->a_bus_req || fsm->b_bus_resume)
- otg_set_state(fsm, OTG_STATE_A_HOST);
- else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout)
- otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
- else if (!fsm->a_vbus_vld)
- otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
- break;
- case OTG_STATE_A_PERIPHERAL:
- if (fsm->id || fsm->a_bus_drop)
- otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
- else if (fsm->a_bidl_adis_tmout || fsm->b_bus_suspend)
- otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
- else if (!fsm->a_vbus_vld)
- otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
- break;
- case OTG_STATE_A_WAIT_VFALL:
- if (fsm->a_wait_vfall_tmout)
- otg_set_state(fsm, OTG_STATE_A_IDLE);
- break;
- case OTG_STATE_A_VBUS_ERR:
- if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err)
- otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
- break;
- default:
- break;
- }
- mutex_unlock(&fsm->lock);
-
- VDBG("quit statemachine, changed = %d\n", state_changed);
- return state_changed;
-}
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index bb39498..7594e50 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -30,7 +30,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/otg.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
@@ -41,34 +41,25 @@
#include "phy-generic.h"
-static struct platform_device *pd;
-
-void usb_nop_xceiv_register(void)
+struct platform_device *usb_phy_generic_register(void)
{
- if (pd)
- return;
- pd = platform_device_register_simple("usb_phy_gen_xceiv", -1, NULL, 0);
- if (IS_ERR(pd)) {
- pr_err("Unable to register generic usb transceiver\n");
- pd = NULL;
- return;
- }
+ return platform_device_register_simple("usb_phy_generic",
+ PLATFORM_DEVID_AUTO, NULL, 0);
}
-EXPORT_SYMBOL(usb_nop_xceiv_register);
+EXPORT_SYMBOL_GPL(usb_phy_generic_register);
-void usb_nop_xceiv_unregister(void)
+void usb_phy_generic_unregister(struct platform_device *pdev)
{
- platform_device_unregister(pd);
- pd = NULL;
+ platform_device_unregister(pdev);
}
-EXPORT_SYMBOL(usb_nop_xceiv_unregister);
+EXPORT_SYMBOL_GPL(usb_phy_generic_unregister);
static int nop_set_suspend(struct usb_phy *x, int suspend)
{
return 0;
}
-static void nop_reset_set(struct usb_phy_gen_xceiv *nop, int asserted)
+static void nop_reset_set(struct usb_phy_generic *nop, int asserted)
{
int value;
@@ -87,7 +78,7 @@ static void nop_reset_set(struct usb_phy_gen_xceiv *nop, int asserted)
int usb_gen_phy_init(struct usb_phy *phy)
{
- struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
+ struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
if (!IS_ERR(nop->vcc)) {
if (regulator_enable(nop->vcc))
@@ -106,7 +97,7 @@ EXPORT_SYMBOL_GPL(usb_gen_phy_init);
void usb_gen_phy_shutdown(struct usb_phy *phy)
{
- struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
+ struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
/* Assert RESET */
nop_reset_set(nop, 1);
@@ -150,8 +141,8 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
return 0;
}
-int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
- struct usb_phy_gen_xceiv_platform_data *pdata)
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
+ struct usb_phy_generic_platform_data *pdata)
{
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err;
@@ -245,10 +236,10 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
}
EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
-static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
+static int usb_phy_generic_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct usb_phy_gen_xceiv *nop;
+ struct usb_phy_generic *nop;
int err;
nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
@@ -274,9 +265,9 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
return 0;
}
-static int usb_phy_gen_xceiv_remove(struct platform_device *pdev)
+static int usb_phy_generic_remove(struct platform_device *pdev)
{
- struct usb_phy_gen_xceiv *nop = platform_get_drvdata(pdev);
+ struct usb_phy_generic *nop = platform_get_drvdata(pdev);
usb_remove_phy(&nop->phy);
@@ -290,29 +281,29 @@ static const struct of_device_id nop_xceiv_dt_ids[] = {
MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
-static struct platform_driver usb_phy_gen_xceiv_driver = {
- .probe = usb_phy_gen_xceiv_probe,
- .remove = usb_phy_gen_xceiv_remove,
+static struct platform_driver usb_phy_generic_driver = {
+ .probe = usb_phy_generic_probe,
+ .remove = usb_phy_generic_remove,
.driver = {
- .name = "usb_phy_gen_xceiv",
+ .name = "usb_phy_generic",
.owner = THIS_MODULE,
.of_match_table = nop_xceiv_dt_ids,
},
};
-static int __init usb_phy_gen_xceiv_init(void)
+static int __init usb_phy_generic_init(void)
{
- return platform_driver_register(&usb_phy_gen_xceiv_driver);
+ return platform_driver_register(&usb_phy_generic_driver);
}
-subsys_initcall(usb_phy_gen_xceiv_init);
+subsys_initcall(usb_phy_generic_init);
-static void __exit usb_phy_gen_xceiv_exit(void)
+static void __exit usb_phy_generic_exit(void)
{
- platform_driver_unregister(&usb_phy_gen_xceiv_driver);
+ platform_driver_unregister(&usb_phy_generic_driver);
}
-module_exit(usb_phy_gen_xceiv_exit);
+module_exit(usb_phy_generic_exit);
-MODULE_ALIAS("platform:usb_phy_gen_xceiv");
+MODULE_ALIAS("platform:usb_phy_generic");
MODULE_AUTHOR("Texas Instruments Inc");
MODULE_DESCRIPTION("NOP USB Transceiver driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
index 38a81f3..d8feacc 100644
--- a/drivers/usb/phy/phy-generic.h
+++ b/drivers/usb/phy/phy-generic.h
@@ -1,9 +1,9 @@
#ifndef _PHY_GENERIC_H_
#define _PHY_GENERIC_H_
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
-struct usb_phy_gen_xceiv {
+struct usb_phy_generic {
struct usb_phy phy;
struct device *dev;
struct clk *clk;
@@ -15,7 +15,7 @@ struct usb_phy_gen_xceiv {
int usb_gen_phy_init(struct usb_phy *phy);
void usb_gen_phy_shutdown(struct usb_phy *phy);
-int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
- struct usb_phy_gen_xceiv_platform_data *pdata);
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
+ struct usb_phy_generic_platform_data *pdata);
#endif
diff --git a/drivers/usb/phy/phy-keystone.c b/drivers/usb/phy/phy-keystone.c
index d762003..f4d722d 100644
--- a/drivers/usb/phy/phy-keystone.c
+++ b/drivers/usb/phy/phy-keystone.c
@@ -18,7 +18,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/usb/usb_phy_gen_xceiv.h>
+#include <linux/usb/usb_phy_generic.h>
#include <linux/io.h>
#include <linux/of.h>
@@ -35,7 +35,7 @@
#define PHY_REF_SSP_EN BIT(29)
struct keystone_usbphy {
- struct usb_phy_gen_xceiv usb_phy_gen;
+ struct usb_phy_generic usb_phy_gen;
void __iomem *phy_ctrl;
};
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 5b37b81..ced34f3 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -30,9 +30,13 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/reset.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
+#include <linux/usb/of.h>
#include <linux/usb/ulpi.h>
#include <linux/usb/gadget.h>
#include <linux/usb/hcd.h>
@@ -44,6 +48,7 @@
#define DRIVER_NAME "msm_otg"
#define ULPI_IO_TIMEOUT_USEC (10 * 1000)
+#define LINK_RESET_TIMEOUT_USEC (250 * 1000)
#define USB_PHY_3P3_VOL_MIN 3050000 /* uV */
#define USB_PHY_3P3_VOL_MAX 3300000 /* uV */
@@ -57,48 +62,38 @@
#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */
#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */
+#define USB_PHY_SUSP_DIG_VOL 500000 /* uV */
-static struct regulator *hsusb_3p3;
-static struct regulator *hsusb_1p8;
-static struct regulator *hsusb_vddcx;
+enum vdd_levels {
+ VDD_LEVEL_NONE = 0,
+ VDD_LEVEL_MIN,
+ VDD_LEVEL_MAX,
+};
static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
{
int ret = 0;
if (init) {
- hsusb_vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX");
- if (IS_ERR(hsusb_vddcx)) {
- dev_err(motg->phy.dev, "unable to get hsusb vddcx\n");
- return PTR_ERR(hsusb_vddcx);
- }
-
- ret = regulator_set_voltage(hsusb_vddcx,
- USB_PHY_VDD_DIG_VOL_MIN,
- USB_PHY_VDD_DIG_VOL_MAX);
+ ret = regulator_set_voltage(motg->vddcx,
+ motg->vdd_levels[VDD_LEVEL_MIN],
+ motg->vdd_levels[VDD_LEVEL_MAX]);
if (ret) {
- dev_err(motg->phy.dev, "unable to set the voltage "
- "for hsusb vddcx\n");
- regulator_put(hsusb_vddcx);
+ dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
return ret;
}
- ret = regulator_enable(hsusb_vddcx);
- if (ret) {
+ ret = regulator_enable(motg->vddcx);
+ if (ret)
dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
- regulator_put(hsusb_vddcx);
- }
} else {
- ret = regulator_set_voltage(hsusb_vddcx, 0,
- USB_PHY_VDD_DIG_VOL_MAX);
+ ret = regulator_set_voltage(motg->vddcx, 0,
+ motg->vdd_levels[VDD_LEVEL_MAX]);
if (ret)
- dev_err(motg->phy.dev, "unable to set the voltage "
- "for hsusb vddcx\n");
- ret = regulator_disable(hsusb_vddcx);
+ dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
+ ret = regulator_disable(motg->vddcx);
if (ret)
dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
-
- regulator_put(hsusb_vddcx);
}
return ret;
@@ -109,98 +104,67 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
int rc = 0;
if (init) {
- hsusb_3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3");
- if (IS_ERR(hsusb_3p3)) {
- dev_err(motg->phy.dev, "unable to get hsusb 3p3\n");
- return PTR_ERR(hsusb_3p3);
- }
-
- rc = regulator_set_voltage(hsusb_3p3, USB_PHY_3P3_VOL_MIN,
+ rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN,
USB_PHY_3P3_VOL_MAX);
if (rc) {
- dev_err(motg->phy.dev, "unable to set voltage level "
- "for hsusb 3p3\n");
- goto put_3p3;
+ dev_err(motg->phy.dev, "Cannot set v3p3 voltage\n");
+ goto exit;
}
- rc = regulator_enable(hsusb_3p3);
+ rc = regulator_enable(motg->v3p3);
if (rc) {
dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
- goto put_3p3;
+ goto exit;
}
- hsusb_1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8");
- if (IS_ERR(hsusb_1p8)) {
- dev_err(motg->phy.dev, "unable to get hsusb 1p8\n");
- rc = PTR_ERR(hsusb_1p8);
- goto disable_3p3;
- }
- rc = regulator_set_voltage(hsusb_1p8, USB_PHY_1P8_VOL_MIN,
+ rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN,
USB_PHY_1P8_VOL_MAX);
if (rc) {
- dev_err(motg->phy.dev, "unable to set voltage level "
- "for hsusb 1p8\n");
- goto put_1p8;
+ dev_err(motg->phy.dev, "Cannot set v1p8 voltage\n");
+ goto disable_3p3;
}
- rc = regulator_enable(hsusb_1p8);
+ rc = regulator_enable(motg->v1p8);
if (rc) {
dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
- goto put_1p8;
+ goto disable_3p3;
}
return 0;
}
- regulator_disable(hsusb_1p8);
-put_1p8:
- regulator_put(hsusb_1p8);
+ regulator_disable(motg->v1p8);
disable_3p3:
- regulator_disable(hsusb_3p3);
-put_3p3:
- regulator_put(hsusb_3p3);
+ regulator_disable(motg->v3p3);
+exit:
return rc;
}
-static int msm_hsusb_ldo_set_mode(int on)
+static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
{
int ret = 0;
- if (!hsusb_1p8 || IS_ERR(hsusb_1p8)) {
- pr_err("%s: HSUSB_1p8 is not initialized\n", __func__);
- return -ENODEV;
- }
-
- if (!hsusb_3p3 || IS_ERR(hsusb_3p3)) {
- pr_err("%s: HSUSB_3p3 is not initialized\n", __func__);
- return -ENODEV;
- }
-
if (on) {
- ret = regulator_set_optimum_mode(hsusb_1p8,
+ ret = regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_HPM_LOAD);
if (ret < 0) {
- pr_err("%s: Unable to set HPM of the regulator "
- "HSUSB_1p8\n", __func__);
+ pr_err("Could not set HPM for v1p8\n");
return ret;
}
- ret = regulator_set_optimum_mode(hsusb_3p3,
+ ret = regulator_set_optimum_mode(motg->v3p3,
USB_PHY_3P3_HPM_LOAD);
if (ret < 0) {
- pr_err("%s: Unable to set HPM of the regulator "
- "HSUSB_3p3\n", __func__);
- regulator_set_optimum_mode(hsusb_1p8,
+ pr_err("Could not set HPM for v3p3\n");
+ regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_LPM_LOAD);
return ret;
}
} else {
- ret = regulator_set_optimum_mode(hsusb_1p8,
+ ret = regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_LPM_LOAD);
if (ret < 0)
- pr_err("%s: Unable to set LPM of the regulator "
- "HSUSB_1p8\n", __func__);
- ret = regulator_set_optimum_mode(hsusb_3p3,
+ pr_err("Could not set LPM for v1p8\n");
+ ret = regulator_set_optimum_mode(motg->v3p3,
USB_PHY_3P3_LPM_LOAD);
if (ret < 0)
- pr_err("%s: Unable to set LPM of the regulator "
- "HSUSB_3p3\n", __func__);
+ pr_err("Could not set LPM for v3p3\n");
}
pr_debug("reg (%s)\n", on ? "HPM" : "LPM");
@@ -265,27 +229,47 @@ static struct usb_phy_io_ops msm_otg_io_ops = {
static void ulpi_init(struct msm_otg *motg)
{
struct msm_otg_platform_data *pdata = motg->pdata;
- int *seq = pdata->phy_init_seq;
+ int *seq = pdata->phy_init_seq, idx;
+ u32 addr = ULPI_EXT_VENDOR_SPECIFIC;
- if (!seq)
- return;
+ for (idx = 0; idx < pdata->phy_init_sz; idx++) {
+ if (seq[idx] == -1)
+ continue;
- while (seq[0] >= 0) {
dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n",
- seq[0], seq[1]);
- ulpi_write(&motg->phy, seq[0], seq[1]);
- seq += 2;
+ seq[idx], addr + idx);
+ ulpi_write(&motg->phy, seq[idx], addr + idx);
}
}
+static int msm_phy_notify_disconnect(struct usb_phy *phy,
+ enum usb_device_speed speed)
+{
+ int val;
+
+ /*
+ * Put the transceiver in non-driving mode. Otherwise host
+ * may not detect soft-disconnection.
+ */
+ val = ulpi_read(phy, ULPI_FUNC_CTRL);
+ val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+ val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+ ulpi_write(phy, val, ULPI_FUNC_CTRL);
+
+ return 0;
+}
+
static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
{
- int ret = 0;
+ int ret;
- if (!motg->pdata->link_clk_reset)
- return ret;
+ if (motg->pdata->link_clk_reset)
+ ret = motg->pdata->link_clk_reset(motg->clk, assert);
+ else if (assert)
+ ret = reset_control_assert(motg->link_rst);
+ else
+ ret = reset_control_deassert(motg->link_rst);
- ret = motg->pdata->link_clk_reset(motg->clk, assert);
if (ret)
dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
assert ? "assert" : "deassert");
@@ -295,111 +279,150 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
static int msm_otg_phy_clk_reset(struct msm_otg *motg)
{
- int ret = 0;
+ int ret;
- if (!motg->pdata->phy_clk_reset)
- return ret;
+ if (motg->pdata->phy_clk_reset)
+ ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
+ else
+ ret = reset_control_reset(motg->phy_rst);
- ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
if (ret)
dev_err(motg->phy.dev, "usb phy clk reset failed\n");
return ret;
}
-static int msm_otg_phy_reset(struct msm_otg *motg)
+static int msm_link_reset(struct msm_otg *motg)
{
u32 val;
int ret;
- int retries;
ret = msm_otg_link_clk_reset(motg, 1);
if (ret)
return ret;
- ret = msm_otg_phy_clk_reset(motg);
- if (ret)
- return ret;
+
+ /* wait for 1ms delay as suggested in HPG. */
+ usleep_range(1000, 1200);
+
ret = msm_otg_link_clk_reset(motg, 0);
if (ret)
return ret;
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
+
+ /* put transceiver in serial mode as part of reset */
val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
- writel(val | PORTSC_PTS_ULPI, USB_PORTSC);
+ writel(val | PORTSC_PTS_SERIAL, USB_PORTSC);
- for (retries = 3; retries > 0; retries--) {
- ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM,
- ULPI_CLR(ULPI_FUNC_CTRL));
- if (!ret)
- break;
- ret = msm_otg_phy_clk_reset(motg);
- if (ret)
- return ret;
- }
- if (!retries)
- return -ETIMEDOUT;
+ return 0;
+}
- /* This reset calibrates the phy, if the above write succeeded */
- ret = msm_otg_phy_clk_reset(motg);
- if (ret)
- return ret;
+static int msm_otg_reset(struct usb_phy *phy)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ int cnt = 0;
- for (retries = 3; retries > 0; retries--) {
- ret = ulpi_read(&motg->phy, ULPI_DEBUG);
- if (ret != -ETIMEDOUT)
+ writel(USBCMD_RESET, USB_USBCMD);
+ while (cnt < LINK_RESET_TIMEOUT_USEC) {
+ if (!(readl(USB_USBCMD) & USBCMD_RESET))
break;
- ret = msm_otg_phy_clk_reset(motg);
- if (ret)
- return ret;
+ udelay(1);
+ cnt++;
}
- if (!retries)
+ if (cnt >= LINK_RESET_TIMEOUT_USEC)
return -ETIMEDOUT;
- dev_info(motg->phy.dev, "phy_reset: success\n");
+ /* select ULPI phy and clear other status/control bits in PORTSC */
+ writel(PORTSC_PTS_ULPI, USB_PORTSC);
+
+ writel(0x0, USB_AHBBURST);
+ writel(0x08, USB_AHBMODE);
+
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
return 0;
}
-#define LINK_RESET_TIMEOUT_USEC (250 * 1000)
-static int msm_otg_reset(struct usb_phy *phy)
+static void msm_phy_reset(struct msm_otg *motg)
+{
+ void __iomem *addr;
+
+ if (motg->pdata->phy_type != SNPS_28NM_INTEGRATED_PHY) {
+ msm_otg_phy_clk_reset(motg);
+ return;
+ }
+
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
+ /* Assert USB PHY_POR */
+ writel(readl(addr) | PHY_POR_ASSERT, addr);
+
+ /*
+ * wait for minimum 10 microseconds as suggested in HPG.
+ * Use a slightly larger value since the exact value didn't
+ * work 100% of the time.
+ */
+ udelay(12);
+
+ /* Deassert USB PHY_POR */
+ writel(readl(addr) & ~PHY_POR_ASSERT, addr);
+}
+
+static int msm_usb_reset(struct usb_phy *phy)
{
struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
- struct msm_otg_platform_data *pdata = motg->pdata;
- int cnt = 0;
int ret;
- u32 val = 0;
- u32 ulpi_val = 0;
- ret = msm_otg_phy_reset(motg);
+ if (!IS_ERR(motg->core_clk))
+ clk_prepare_enable(motg->core_clk);
+
+ ret = msm_link_reset(motg);
if (ret) {
dev_err(phy->dev, "phy_reset failed\n");
return ret;
}
- ulpi_init(motg);
-
- writel(USBCMD_RESET, USB_USBCMD);
- while (cnt < LINK_RESET_TIMEOUT_USEC) {
- if (!(readl(USB_USBCMD) & USBCMD_RESET))
- break;
- udelay(1);
- cnt++;
+ ret = msm_otg_reset(&motg->phy);
+ if (ret) {
+ dev_err(phy->dev, "link reset failed\n");
+ return ret;
}
- if (cnt >= LINK_RESET_TIMEOUT_USEC)
- return -ETIMEDOUT;
-
- /* select ULPI phy */
- writel(0x80000000, USB_PORTSC);
msleep(100);
- writel(0x0, USB_AHBBURST);
- writel(0x00, USB_AHBMODE);
+ /* Reset USB PHY after performing USB Link RESET */
+ msm_phy_reset(motg);
+
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
+
+ return 0;
+}
+
+static int msm_phy_init(struct usb_phy *phy)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ u32 val, ulpi_val = 0;
+
+ /* Program USB PHY Override registers. */
+ ulpi_init(motg);
+
+ /*
+ * It is recommended in HPG to reset USB PHY after programming
+ * USB PHY Override registers.
+ */
+ msm_phy_reset(motg);
if (pdata->otg_control == OTG_PHY_CONTROL) {
val = readl(USB_OTGSC);
- if (pdata->mode == USB_OTG) {
+ if (pdata->mode == USB_DR_MODE_OTG) {
ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
val |= OTGSC_IDIE | OTGSC_BSVIE;
- } else if (pdata->mode == USB_PERIPHERAL) {
+ } else if (pdata->mode == USB_DR_MODE_PERIPHERAL) {
ulpi_val = ULPI_INT_SESS_VALID;
val |= OTGSC_BSVIE;
}
@@ -408,6 +431,9 @@ static int msm_otg_reset(struct usb_phy *phy)
ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL);
}
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
+
return 0;
}
@@ -416,22 +442,20 @@ static int msm_otg_reset(struct usb_phy *phy)
#ifdef CONFIG_PM
-#define USB_PHY_SUSP_DIG_VOL 500000
-static int msm_hsusb_config_vddcx(int high)
+static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high)
{
- int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
+ int max_vol = motg->vdd_levels[VDD_LEVEL_MAX];
int min_vol;
int ret;
if (high)
- min_vol = USB_PHY_VDD_DIG_VOL_MIN;
+ min_vol = motg->vdd_levels[VDD_LEVEL_MIN];
else
- min_vol = USB_PHY_SUSP_DIG_VOL;
+ min_vol = motg->vdd_levels[VDD_LEVEL_NONE];
- ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
+ ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol);
if (ret) {
- pr_err("%s: unable to set the voltage for regulator "
- "HSUSB_VDDCX\n", __func__);
+ pr_err("Cannot set vddcx voltage\n");
return ret;
}
@@ -445,6 +469,7 @@ static int msm_otg_suspend(struct msm_otg *motg)
struct usb_phy *phy = &motg->phy;
struct usb_bus *bus = phy->otg->host;
struct msm_otg_platform_data *pdata = motg->pdata;
+ void __iomem *addr;
int cnt = 0;
if (atomic_read(&motg->in_lpm))
@@ -504,22 +529,23 @@ static int msm_otg_suspend(struct msm_otg *motg)
*/
writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL)
- writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL);
+ writel(readl(addr) | PHY_RETEN, addr);
clk_disable_unprepare(motg->pclk);
clk_disable_unprepare(motg->clk);
- if (motg->core_clk)
+ if (!IS_ERR(motg->core_clk))
clk_disable_unprepare(motg->core_clk);
- if (!IS_ERR(motg->pclk_src))
- clk_disable_unprepare(motg->pclk_src);
-
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
- msm_hsusb_ldo_set_mode(0);
- msm_hsusb_config_vddcx(0);
+ msm_hsusb_ldo_set_mode(motg, 0);
+ msm_hsusb_config_vddcx(motg, 0);
}
if (device_may_wakeup(phy->dev))
@@ -539,25 +565,28 @@ static int msm_otg_resume(struct msm_otg *motg)
{
struct usb_phy *phy = &motg->phy;
struct usb_bus *bus = phy->otg->host;
+ void __iomem *addr;
int cnt = 0;
unsigned temp;
if (!atomic_read(&motg->in_lpm))
return 0;
- if (!IS_ERR(motg->pclk_src))
- clk_prepare_enable(motg->pclk_src);
-
clk_prepare_enable(motg->pclk);
clk_prepare_enable(motg->clk);
- if (motg->core_clk)
+ if (!IS_ERR(motg->core_clk))
clk_prepare_enable(motg->core_clk);
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
- msm_hsusb_ldo_set_mode(1);
- msm_hsusb_config_vddcx(1);
- writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL);
+
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
+ msm_hsusb_ldo_set_mode(motg, 1);
+ msm_hsusb_config_vddcx(motg, 1);
+ writel(readl(addr) & ~PHY_RETEN, addr);
}
temp = readl(USB_USBCMD);
@@ -586,8 +615,7 @@ static int msm_otg_resume(struct msm_otg *motg)
* PHY. USB state can not be restored. Re-insertion
* of USB cable is the only way to get USB working.
*/
- dev_err(phy->dev, "Unable to resume USB."
- "Re-plugin the cable\n");
+ dev_err(phy->dev, "Unable to resume USB. Re-plugin the cable\n");
msm_otg_reset(phy);
}
@@ -687,7 +715,7 @@ static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
* Fail host registration if this board can support
* only peripheral configuration.
*/
- if (motg->pdata->mode == USB_PERIPHERAL) {
+ if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL) {
dev_info(otg->phy->dev, "Host mode is not supported\n");
return -ENODEV;
}
@@ -716,7 +744,7 @@ static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
* Kick the state machine work, if peripheral is not supported
* or peripheral is already registered with us.
*/
- if (motg->pdata->mode == USB_HOST || otg->gadget) {
+ if (motg->pdata->mode == USB_DR_MODE_HOST || otg->gadget) {
pm_runtime_get_sync(otg->phy->dev);
schedule_work(&motg->sm_work);
}
@@ -760,7 +788,7 @@ static int msm_otg_set_peripheral(struct usb_otg *otg,
* Fail peripheral registration if this board can support
* only host configuration.
*/
- if (motg->pdata->mode == USB_HOST) {
+ if (motg->pdata->mode == USB_DR_MODE_HOST) {
dev_info(otg->phy->dev, "Peripheral mode is not supported\n");
return -ENODEV;
}
@@ -785,7 +813,7 @@ static int msm_otg_set_peripheral(struct usb_otg *otg,
* Kick the state machine work, if host is not supported
* or host is already registered with us.
*/
- if (motg->pdata->mode == USB_PERIPHERAL || otg->host) {
+ if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL || otg->host) {
pm_runtime_get_sync(otg->phy->dev);
schedule_work(&motg->sm_work);
}
@@ -1106,7 +1134,7 @@ static void msm_otg_init_sm(struct msm_otg *motg)
u32 otgsc = readl(USB_OTGSC);
switch (pdata->mode) {
- case USB_OTG:
+ case USB_DR_MODE_OTG:
if (pdata->otg_control == OTG_PHY_CONTROL) {
if (otgsc & OTGSC_ID)
set_bit(ID, &motg->inputs);
@@ -1118,21 +1146,14 @@ static void msm_otg_init_sm(struct msm_otg *motg)
else
clear_bit(B_SESS_VLD, &motg->inputs);
} else if (pdata->otg_control == OTG_USER_CONTROL) {
- if (pdata->default_mode == USB_HOST) {
- clear_bit(ID, &motg->inputs);
- } else if (pdata->default_mode == USB_PERIPHERAL) {
- set_bit(ID, &motg->inputs);
- set_bit(B_SESS_VLD, &motg->inputs);
- } else {
set_bit(ID, &motg->inputs);
clear_bit(B_SESS_VLD, &motg->inputs);
- }
}
break;
- case USB_HOST:
+ case USB_DR_MODE_HOST:
clear_bit(ID, &motg->inputs);
break;
- case USB_PERIPHERAL:
+ case USB_DR_MODE_PERIPHERAL:
set_bit(ID, &motg->inputs);
if (otgsc & OTGSC_BSV)
set_bit(B_SESS_VLD, &motg->inputs);
@@ -1282,13 +1303,13 @@ static int msm_otg_mode_show(struct seq_file *s, void *unused)
switch (otg->phy->state) {
case OTG_STATE_A_HOST:
- seq_printf(s, "host\n");
+ seq_puts(s, "host\n");
break;
case OTG_STATE_B_PERIPHERAL:
- seq_printf(s, "peripheral\n");
+ seq_puts(s, "peripheral\n");
break;
default:
- seq_printf(s, "none\n");
+ seq_puts(s, "none\n");
break;
}
@@ -1308,7 +1329,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
char buf[16];
struct usb_otg *otg = motg->phy.otg;
int status = count;
- enum usb_mode_type req_mode;
+ enum usb_dr_mode req_mode;
memset(buf, 0x00, sizeof(buf));
@@ -1318,18 +1339,18 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
}
if (!strncmp(buf, "host", 4)) {
- req_mode = USB_HOST;
+ req_mode = USB_DR_MODE_HOST;
} else if (!strncmp(buf, "peripheral", 10)) {
- req_mode = USB_PERIPHERAL;
+ req_mode = USB_DR_MODE_PERIPHERAL;
} else if (!strncmp(buf, "none", 4)) {
- req_mode = USB_NONE;
+ req_mode = USB_DR_MODE_UNKNOWN;
} else {
status = -EINVAL;
goto out;
}
switch (req_mode) {
- case USB_NONE:
+ case USB_DR_MODE_UNKNOWN:
switch (otg->phy->state) {
case OTG_STATE_A_HOST:
case OTG_STATE_B_PERIPHERAL:
@@ -1340,7 +1361,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
goto out;
}
break;
- case USB_PERIPHERAL:
+ case USB_DR_MODE_PERIPHERAL:
switch (otg->phy->state) {
case OTG_STATE_B_IDLE:
case OTG_STATE_A_HOST:
@@ -1351,7 +1372,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
goto out;
}
break;
- case USB_HOST:
+ case USB_DR_MODE_HOST:
switch (otg->phy->state) {
case OTG_STATE_B_IDLE:
case OTG_STATE_B_PERIPHERAL:
@@ -1406,74 +1427,154 @@ static void msm_otg_debugfs_cleanup(void)
debugfs_remove(msm_otg_dbg_root);
}
-static int __init msm_otg_probe(struct platform_device *pdev)
+static struct of_device_id msm_otg_dt_match[] = {
+ {
+ .compatible = "qcom,usb-otg-ci",
+ .data = (void *) CI_45NM_INTEGRATED_PHY
+ },
+ {
+ .compatible = "qcom,usb-otg-snps",
+ .data = (void *) SNPS_28NM_INTEGRATED_PHY
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, msm_otg_dt_match);
+
+static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
+{
+ struct msm_otg_platform_data *pdata;
+ const struct of_device_id *id;
+ struct device_node *node = pdev->dev.of_node;
+ struct property *prop;
+ int len, ret, words;
+ u32 val, tmp[3];
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ motg->pdata = pdata;
+
+ id = of_match_device(msm_otg_dt_match, &pdev->dev);
+ pdata->phy_type = (enum msm_usb_phy_type) id->data;
+
+ motg->link_rst = devm_reset_control_get(&pdev->dev, "link");
+ if (IS_ERR(motg->link_rst))
+ return PTR_ERR(motg->link_rst);
+
+ motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy");
+ if (IS_ERR(motg->phy_rst))
+ return PTR_ERR(motg->phy_rst);
+
+ pdata->mode = of_usb_get_dr_mode(node);
+ if (pdata->mode == USB_DR_MODE_UNKNOWN)
+ pdata->mode = USB_DR_MODE_OTG;
+
+ pdata->otg_control = OTG_PHY_CONTROL;
+ if (!of_property_read_u32(node, "qcom,otg-control", &val))
+ if (val == OTG_PMIC_CONTROL)
+ pdata->otg_control = val;
+
+ if (!of_property_read_u32(node, "qcom,phy-num", &val) && val < 2)
+ motg->phy_number = val;
+
+ motg->vdd_levels[VDD_LEVEL_NONE] = USB_PHY_SUSP_DIG_VOL;
+ motg->vdd_levels[VDD_LEVEL_MIN] = USB_PHY_VDD_DIG_VOL_MIN;
+ motg->vdd_levels[VDD_LEVEL_MAX] = USB_PHY_VDD_DIG_VOL_MAX;
+
+ if (of_get_property(node, "qcom,vdd-levels", &len) &&
+ len == sizeof(tmp)) {
+ of_property_read_u32_array(node, "qcom,vdd-levels",
+ tmp, len / sizeof(*tmp));
+ motg->vdd_levels[VDD_LEVEL_NONE] = tmp[VDD_LEVEL_NONE];
+ motg->vdd_levels[VDD_LEVEL_MIN] = tmp[VDD_LEVEL_MIN];
+ motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX];
+ }
+
+ prop = of_find_property(node, "qcom,phy-init-sequence", &len);
+ if (!prop || !len)
+ return 0;
+
+ words = len / sizeof(u32);
+
+ if (words >= ULPI_EXT_VENDOR_SPECIFIC) {
+ dev_warn(&pdev->dev, "Too big PHY init sequence %d\n", words);
+ return 0;
+ }
+
+ pdata->phy_init_seq = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
+ if (!pdata->phy_init_seq) {
+ dev_warn(&pdev->dev, "No space for PHY init sequence\n");
+ return 0;
+ }
+
+ ret = of_property_read_u32_array(node, "qcom,phy-init-sequence",
+ pdata->phy_init_seq, words);
+ if (!ret)
+ pdata->phy_init_sz = words;
+
+ return 0;
+}
+
+static int msm_otg_probe(struct platform_device *pdev)
{
+ struct regulator_bulk_data regs[3];
int ret = 0;
+ struct device_node *np = pdev->dev.of_node;
+ struct msm_otg_platform_data *pdata;
struct resource *res;
struct msm_otg *motg;
struct usb_phy *phy;
+ void __iomem *phy_select;
- dev_info(&pdev->dev, "msm_otg probe\n");
- if (!dev_get_platdata(&pdev->dev)) {
- dev_err(&pdev->dev, "No platform data given. Bailing out\n");
- return -ENODEV;
- }
-
- motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL);
+ motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL);
if (!motg) {
dev_err(&pdev->dev, "unable to allocate msm_otg\n");
return -ENOMEM;
}
- motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ if (!np)
+ return -ENXIO;
+ ret = msm_otg_read_dt(pdev, motg);
+ if (ret)
+ return ret;
+ }
+
+ motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
+ GFP_KERNEL);
if (!motg->phy.otg) {
dev_err(&pdev->dev, "unable to allocate msm_otg\n");
- ret = -ENOMEM;
- goto free_motg;
+ return -ENOMEM;
}
- motg->pdata = dev_get_platdata(&pdev->dev);
phy = &motg->phy;
phy->dev = &pdev->dev;
- motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk");
+ motg->phy_reset_clk = devm_clk_get(&pdev->dev,
+ np ? "phy" : "usb_phy_clk");
if (IS_ERR(motg->phy_reset_clk)) {
dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
- ret = PTR_ERR(motg->phy_reset_clk);
- goto free_motg;
+ return PTR_ERR(motg->phy_reset_clk);
}
- motg->clk = clk_get(&pdev->dev, "usb_hs_clk");
+ motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
if (IS_ERR(motg->clk)) {
dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
- ret = PTR_ERR(motg->clk);
- goto put_phy_reset_clk;
+ return PTR_ERR(motg->clk);
}
- clk_set_rate(motg->clk, 60000000);
/*
* If USB Core is running its protocol engine based on CORE CLK,
* CORE CLK must be running at >55Mhz for correct HSUSB
* operation and USB core cannot tolerate frequency changes on
- * CORE CLK. For such USB cores, vote for maximum clk frequency
- * on pclk source
+ * CORE CLK.
*/
- if (motg->pdata->pclk_src_name) {
- motg->pclk_src = clk_get(&pdev->dev,
- motg->pdata->pclk_src_name);
- if (IS_ERR(motg->pclk_src))
- goto put_clk;
- clk_set_rate(motg->pclk_src, INT_MAX);
- clk_prepare_enable(motg->pclk_src);
- } else
- motg->pclk_src = ERR_PTR(-ENOENT);
-
-
- motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk");
+ motg->pclk = devm_clk_get(&pdev->dev, np ? "iface" : "usb_hs_pclk");
if (IS_ERR(motg->pclk)) {
dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
- ret = PTR_ERR(motg->pclk);
- goto put_pclk_src;
+ return PTR_ERR(motg->pclk);
}
/*
@@ -1481,69 +1582,90 @@ static int __init msm_otg_probe(struct platform_device *pdev)
* clock is introduced to remove the dependency on AXI
* bus frequency.
*/
- motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk");
- if (IS_ERR(motg->core_clk))
- motg->core_clk = NULL;
+ motg->core_clk = devm_clk_get(&pdev->dev,
+ np ? "alt_core" : "usb_hs_core_clk");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "failed to get platform resource mem\n");
- ret = -ENODEV;
- goto put_core_clk;
- }
+ if (!res)
+ return -EINVAL;
+ motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!motg->regs)
+ return -ENOMEM;
- motg->regs = ioremap(res->start, resource_size(res));
- if (!motg->regs) {
- dev_err(&pdev->dev, "ioremap failed\n");
- ret = -ENOMEM;
- goto put_core_clk;
+ /*
+ * NOTE: The PHYs can be multiplexed between the chipidea controller
+ * and the dwc3 controller, using a single bit. It is important that
+ * the dwc3 driver does not set this bit in an incompatible way.
+ */
+ if (motg->phy_number) {
+ phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
+ if (IS_ERR(phy_select))
+ return PTR_ERR(phy_select);
+ /* Enable second PHY with the OTG port */
+ writel(0x1, phy_select);
}
+
dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
motg->irq = platform_get_irq(pdev, 0);
- if (!motg->irq) {
+ if (motg->irq < 0) {
dev_err(&pdev->dev, "platform_get_irq failed\n");
- ret = -ENODEV;
- goto free_regs;
+ return motg->irq;
}
+ regs[0].supply = "vddcx";
+ regs[1].supply = "v3p3";
+ regs[2].supply = "v1p8";
+
+ ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs);
+ if (ret)
+ return ret;
+
+ motg->vddcx = regs[0].consumer;
+ motg->v3p3 = regs[1].consumer;
+ motg->v1p8 = regs[2].consumer;
+
+ clk_set_rate(motg->clk, 60000000);
+
clk_prepare_enable(motg->clk);
clk_prepare_enable(motg->pclk);
+ if (!IS_ERR(motg->core_clk))
+ clk_prepare_enable(motg->core_clk);
+
ret = msm_hsusb_init_vddcx(motg, 1);
if (ret) {
dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
- goto free_regs;
+ goto disable_clks;
}
ret = msm_hsusb_ldo_init(motg, 1);
if (ret) {
dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
- goto vddcx_exit;
+ goto disable_vddcx;
}
- ret = msm_hsusb_ldo_set_mode(1);
+ ret = msm_hsusb_ldo_set_mode(motg, 1);
if (ret) {
dev_err(&pdev->dev, "hsusb vreg enable failed\n");
- goto ldo_exit;
+ goto disable_ldo;
}
- if (motg->core_clk)
- clk_prepare_enable(motg->core_clk);
-
writel(0, USB_USBINTR);
writel(0, USB_OTGSC);
INIT_WORK(&motg->sm_work, msm_otg_sm_work);
INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work);
- ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED,
+ ret = devm_request_irq(&pdev->dev, motg->irq, msm_otg_irq, IRQF_SHARED,
"msm_otg", motg);
if (ret) {
dev_err(&pdev->dev, "request irq failed\n");
- goto disable_clks;
+ goto disable_ldo;
}
- phy->init = msm_otg_reset;
+ phy->init = msm_phy_init;
phy->set_power = msm_otg_set_power;
+ phy->notify_disconnect = msm_phy_notify_disconnect;
+ phy->type = USB_PHY_TYPE_USB2;
phy->io_ops = &msm_otg_io_ops;
@@ -1551,54 +1673,38 @@ static int __init msm_otg_probe(struct platform_device *pdev)
phy->otg->set_host = msm_otg_set_host;
phy->otg->set_peripheral = msm_otg_set_peripheral;
- ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2);
+ msm_usb_reset(phy);
+
+ ret = usb_add_phy_dev(&motg->phy);
if (ret) {
dev_err(&pdev->dev, "usb_add_phy failed\n");
- goto free_irq;
+ goto disable_ldo;
}
platform_set_drvdata(pdev, motg);
device_init_wakeup(&pdev->dev, 1);
- if (motg->pdata->mode == USB_OTG &&
- motg->pdata->otg_control == OTG_USER_CONTROL) {
+ if (motg->pdata->mode == USB_DR_MODE_OTG &&
+ motg->pdata->otg_control == OTG_USER_CONTROL) {
ret = msm_otg_debugfs_init(motg);
if (ret)
- dev_dbg(&pdev->dev, "mode debugfs file is"
- "not available\n");
+ dev_dbg(&pdev->dev, "Can not create mode change file\n");
}
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
return 0;
-free_irq:
- free_irq(motg->irq, motg);
+
+disable_ldo:
+ msm_hsusb_ldo_init(motg, 0);
+disable_vddcx:
+ msm_hsusb_init_vddcx(motg, 0);
disable_clks:
clk_disable_unprepare(motg->pclk);
clk_disable_unprepare(motg->clk);
-ldo_exit:
- msm_hsusb_ldo_init(motg, 0);
-vddcx_exit:
- msm_hsusb_init_vddcx(motg, 0);
-free_regs:
- iounmap(motg->regs);
-put_core_clk:
- if (motg->core_clk)
- clk_put(motg->core_clk);
- clk_put(motg->pclk);
-put_pclk_src:
- if (!IS_ERR(motg->pclk_src)) {
- clk_disable_unprepare(motg->pclk_src);
- clk_put(motg->pclk_src);
- }
-put_clk:
- clk_put(motg->clk);
-put_phy_reset_clk:
- clk_put(motg->phy_reset_clk);
-free_motg:
- kfree(motg->phy.otg);
- kfree(motg);
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
return ret;
}
@@ -1621,7 +1727,7 @@ static int msm_otg_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
usb_remove_phy(phy);
- free_irq(motg->irq, motg);
+ disable_irq(motg->irq);
/*
* Put PHY in low power mode.
@@ -1641,26 +1747,12 @@ static int msm_otg_remove(struct platform_device *pdev)
clk_disable_unprepare(motg->pclk);
clk_disable_unprepare(motg->clk);
- if (motg->core_clk)
+ if (!IS_ERR(motg->core_clk))
clk_disable_unprepare(motg->core_clk);
- if (!IS_ERR(motg->pclk_src)) {
- clk_disable_unprepare(motg->pclk_src);
- clk_put(motg->pclk_src);
- }
msm_hsusb_ldo_init(motg, 0);
- iounmap(motg->regs);
pm_runtime_set_suspended(&pdev->dev);
- clk_put(motg->phy_reset_clk);
- clk_put(motg->pclk);
- clk_put(motg->clk);
- if (motg->core_clk)
- clk_put(motg->core_clk);
-
- kfree(motg->phy.otg);
- kfree(motg);
-
return 0;
}
@@ -1740,15 +1832,17 @@ static const struct dev_pm_ops msm_otg_dev_pm_ops = {
};
static struct platform_driver msm_otg_driver = {
+ .probe = msm_otg_probe,
.remove = msm_otg_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.pm = &msm_otg_dev_pm_ops,
+ .of_match_table = msm_otg_dt_match,
},
};
-module_platform_driver_probe(msm_otg_driver, msm_otg_probe);
+module_platform_driver(msm_otg_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MSM USB transceiver driver");
diff --git a/drivers/usb/phy/phy-mv-u3d-usb.c b/drivers/usb/phy/phy-mv-u3d-usb.c
deleted file mode 100644
index d317903..0000000
--- a/drivers/usb/phy/phy-mv-u3d-usb.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/usb/otg.h>
-#include <linux/platform_data/mv_usb.h>
-
-#include "phy-mv-u3d-usb.h"
-
-/*
- * struct mv_u3d_phy - transceiver driver state
- * @phy: transceiver structure
- * @dev: The parent device supplied to the probe function
- * @clk: usb phy clock
- * @base: usb phy register memory base
- */
-struct mv_u3d_phy {
- struct usb_phy phy;
- struct mv_usb_platform_data *plat;
- struct device *dev;
- struct clk *clk;
- void __iomem *base;
-};
-
-static u32 mv_u3d_phy_read(void __iomem *base, u32 reg)
-{
- void __iomem *addr, *data;
-
- addr = base;
- data = base + 0x4;
-
- writel_relaxed(reg, addr);
- return readl_relaxed(data);
-}
-
-static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value)
-{
- void __iomem *addr, *data;
- u32 tmp;
-
- addr = base;
- data = base + 0x4;
-
- writel_relaxed(reg, addr);
- tmp = readl_relaxed(data);
- tmp |= value;
- writel_relaxed(tmp, data);
-}
-
-static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value)
-{
- void __iomem *addr, *data;
- u32 tmp;
-
- addr = base;
- data = base + 0x4;
-
- writel_relaxed(reg, addr);
- tmp = readl_relaxed(data);
- tmp &= ~value;
- writel_relaxed(tmp, data);
-}
-
-static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value)
-{
- void __iomem *addr, *data;
-
- addr = base;
- data = base + 0x4;
-
- writel_relaxed(reg, addr);
- writel_relaxed(value, data);
-}
-
-static void mv_u3d_phy_shutdown(struct usb_phy *phy)
-{
- struct mv_u3d_phy *mv_u3d_phy;
- void __iomem *base;
- u32 val;
-
- mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy);
- base = mv_u3d_phy->base;
-
- /* Power down Reference Analog current, bit 15
- * Power down PLL, bit 14
- * Power down Receiver, bit 13
- * Power down Transmitter, bit 12
- * of USB3_POWER_PLL_CONTROL register
- */
- val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
- val &= ~(USB3_POWER_PLL_CONTROL_PU);
- mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
-
- if (mv_u3d_phy->clk)
- clk_disable(mv_u3d_phy->clk);
-}
-
-static int mv_u3d_phy_init(struct usb_phy *phy)
-{
- struct mv_u3d_phy *mv_u3d_phy;
- void __iomem *base;
- u32 val, count;
-
- /* enable usb3 phy */
- mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy);
-
- if (mv_u3d_phy->clk)
- clk_enable(mv_u3d_phy->clk);
-
- base = mv_u3d_phy->base;
-
- val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
- val &= ~(USB3_POWER_PLL_CONTROL_PU_MASK);
- val |= 0xF << USB3_POWER_PLL_CONTROL_PU_SHIFT;
- mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
- udelay(100);
-
- mv_u3d_phy_write(base, USB3_RESET_CONTROL,
- USB3_RESET_CONTROL_RESET_PIPE);
- udelay(100);
-
- mv_u3d_phy_write(base, USB3_RESET_CONTROL,
- USB3_RESET_CONTROL_RESET_PIPE
- | USB3_RESET_CONTROL_RESET_PHY);
- udelay(100);
-
- val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
- val &= ~(USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK
- | USB3_POWER_PLL_CONTROL_PHY_MODE_MASK);
- val |= (USB3_PLL_25MHZ << USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT)
- | (0x5 << USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT);
- mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
- udelay(100);
-
- mv_u3d_phy_clear(base, USB3_KVCO_CALI_CONTROL,
- USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK);
- udelay(100);
-
- val = mv_u3d_phy_read(base, USB3_SQUELCH_FFE);
- val &= ~(USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK
- | USB3_SQUELCH_FFE_FFE_RES_SEL_MASK
- | USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK);
- val |= ((0xD << USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT)
- | (0x7 << USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT)
- | (0x8 << USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT));
- mv_u3d_phy_write(base, USB3_SQUELCH_FFE, val);
- udelay(100);
-
- val = mv_u3d_phy_read(base, USB3_GEN1_SET0);
- val &= ~USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK;
- val |= 1 << USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT;
- mv_u3d_phy_write(base, USB3_GEN1_SET0, val);
- udelay(100);
-
- val = mv_u3d_phy_read(base, USB3_GEN2_SET0);
- val &= ~(USB3_GEN2_SET0_G2_TX_AMP_MASK
- | USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK
- | USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK);
- val |= ((0x14 << USB3_GEN2_SET0_G2_TX_AMP_SHIFT)
- | (1 << USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT)
- | (0xA << USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT)
- | (1 << USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT));
- mv_u3d_phy_write(base, USB3_GEN2_SET0, val);
- udelay(100);
-
- mv_u3d_phy_read(base, USB3_TX_EMPPH);
- val &= ~(USB3_TX_EMPPH_AMP_MASK
- | USB3_TX_EMPPH_EN_MASK
- | USB3_TX_EMPPH_AMP_FORCE_MASK
- | USB3_TX_EMPPH_PAR1_MASK
- | USB3_TX_EMPPH_PAR2_MASK);
- val |= ((0xB << USB3_TX_EMPPH_AMP_SHIFT)
- | (1 << USB3_TX_EMPPH_EN_SHIFT)
- | (1 << USB3_TX_EMPPH_AMP_FORCE_SHIFT)
- | (0x1C << USB3_TX_EMPPH_PAR1_SHIFT)
- | (1 << USB3_TX_EMPPH_PAR2_SHIFT));
-
- mv_u3d_phy_write(base, USB3_TX_EMPPH, val);
- udelay(100);
-
- val = mv_u3d_phy_read(base, USB3_GEN2_SET1);
- val &= ~(USB3_GEN2_SET1_G2_RX_SELMUPI_MASK
- | USB3_GEN2_SET1_G2_RX_SELMUPF_MASK
- | USB3_GEN2_SET1_G2_RX_SELMUFI_MASK
- | USB3_GEN2_SET1_G2_RX_SELMUFF_MASK);
- val |= ((1 << USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT)
- | (1 << USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT)
- | (1 << USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT)
- | (1 << USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT));
- mv_u3d_phy_write(base, USB3_GEN2_SET1, val);
- udelay(100);
-
- val = mv_u3d_phy_read(base, USB3_DIGITAL_LOOPBACK_EN);
- val &= ~USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK;
- val |= 1 << USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT;
- mv_u3d_phy_write(base, USB3_DIGITAL_LOOPBACK_EN, val);
- udelay(100);
-
- val = mv_u3d_phy_read(base, USB3_IMPEDANCE_TX_SSC);
- val &= ~USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK;
- val |= 0xC << USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT;
- mv_u3d_phy_write(base, USB3_IMPEDANCE_TX_SSC, val);
- udelay(100);
-
- val = mv_u3d_phy_read(base, USB3_IMPEDANCE_CALI_CTRL);
- val &= ~USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK;
- val |= 0x4 << USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT;
- mv_u3d_phy_write(base, USB3_IMPEDANCE_CALI_CTRL, val);
- udelay(100);
-
- val = mv_u3d_phy_read(base, USB3_PHY_ISOLATION_MODE);
- val &= ~(USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK
- | USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK
- | USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK);
- val |= ((1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT)
- | (1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT));
- mv_u3d_phy_write(base, USB3_PHY_ISOLATION_MODE, val);
- udelay(100);
-
- val = mv_u3d_phy_read(base, USB3_TXDETRX);
- val &= ~(USB3_TXDETRX_VTHSEL_MASK);
- val |= 0x1 << USB3_TXDETRX_VTHSEL_SHIFT;
- mv_u3d_phy_write(base, USB3_TXDETRX, val);
- udelay(100);
-
- dev_dbg(mv_u3d_phy->dev, "start calibration\n");
-
-calstart:
- /* Perform Manual Calibration */
- mv_u3d_phy_set(base, USB3_KVCO_CALI_CONTROL,
- 1 << USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT);
-
- mdelay(1);
-
- count = 0;
- while (1) {
- val = mv_u3d_phy_read(base, USB3_KVCO_CALI_CONTROL);
- if (val & (1 << USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT))
- break;
- else if (count > 50) {
- dev_dbg(mv_u3d_phy->dev, "calibration failure, retry...\n");
- goto calstart;
- }
- count++;
- mdelay(1);
- }
-
- /* active PIPE interface */
- mv_u3d_phy_write(base, USB3_PIPE_SM_CTRL,
- 1 << USB3_PIPE_SM_CTRL_PHY_INIT_DONE);
-
- return 0;
-}
-
-static int mv_u3d_phy_probe(struct platform_device *pdev)
-{
- struct mv_u3d_phy *mv_u3d_phy;
- struct mv_usb_platform_data *pdata;
- struct device *dev = &pdev->dev;
- struct resource *res;
- void __iomem *phy_base;
- int ret;
-
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
- return -EINVAL;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- phy_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(phy_base))
- return PTR_ERR(phy_base);
-
- mv_u3d_phy = devm_kzalloc(dev, sizeof(*mv_u3d_phy), GFP_KERNEL);
- if (!mv_u3d_phy)
- return -ENOMEM;
-
- mv_u3d_phy->dev = &pdev->dev;
- mv_u3d_phy->plat = pdata;
- mv_u3d_phy->base = phy_base;
- mv_u3d_phy->phy.dev = mv_u3d_phy->dev;
- mv_u3d_phy->phy.label = "mv-u3d-phy";
- mv_u3d_phy->phy.init = mv_u3d_phy_init;
- mv_u3d_phy->phy.shutdown = mv_u3d_phy_shutdown;
-
- ret = usb_add_phy(&mv_u3d_phy->phy, USB_PHY_TYPE_USB3);
- if (ret)
- goto err;
-
- if (!mv_u3d_phy->clk)
- mv_u3d_phy->clk = clk_get(mv_u3d_phy->dev, "u3dphy");
-
- platform_set_drvdata(pdev, mv_u3d_phy);
-
- dev_info(&pdev->dev, "Initialized Marvell USB 3.0 PHY\n");
-err:
- return ret;
-}
-
-static int mv_u3d_phy_remove(struct platform_device *pdev)
-{
- struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev);
-
- usb_remove_phy(&mv_u3d_phy->phy);
-
- if (mv_u3d_phy->clk) {
- clk_put(mv_u3d_phy->clk);
- mv_u3d_phy->clk = NULL;
- }
-
- return 0;
-}
-
-static struct platform_driver mv_u3d_phy_driver = {
- .probe = mv_u3d_phy_probe,
- .remove = mv_u3d_phy_remove,
- .driver = {
- .name = "mv-u3d-phy",
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(mv_u3d_phy_driver);
-MODULE_DESCRIPTION("Marvell USB 3.0 PHY controller");
-MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:mv-u3d-phy");
diff --git a/drivers/usb/phy/phy-mv-u3d-usb.h b/drivers/usb/phy/phy-mv-u3d-usb.h
deleted file mode 100644
index 2a658cb..0000000
--- a/drivers/usb/phy/phy-mv-u3d-usb.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-#ifndef __MV_U3D_PHY_H
-#define __MV_U3D_PHY_H
-
-#define USB3_POWER_PLL_CONTROL 0x1
-#define USB3_KVCO_CALI_CONTROL 0x2
-#define USB3_IMPEDANCE_CALI_CTRL 0x3
-#define USB3_IMPEDANCE_TX_SSC 0x4
-#define USB3_SQUELCH_FFE 0x6
-#define USB3_GEN1_SET0 0xD
-#define USB3_GEN2_SET0 0xF
-#define USB3_GEN2_SET1 0x10
-#define USB3_DIGITAL_LOOPBACK_EN 0x23
-#define USB3_PHY_ISOLATION_MODE 0x26
-#define USB3_TXDETRX 0x48
-#define USB3_TX_EMPPH 0x5E
-#define USB3_RESET_CONTROL 0x90
-#define USB3_PIPE_SM_CTRL 0x91
-
-#define USB3_RESET_CONTROL_RESET_PIPE 0x1
-#define USB3_RESET_CONTROL_RESET_PHY 0x2
-
-#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK (0x1F << 0)
-#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT 0
-#define USB3_PLL_25MHZ 0x2
-#define USB3_PLL_26MHZ 0x5
-#define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK (0x7 << 5)
-#define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT 5
-#define USB3_POWER_PLL_CONTROL_PU_MASK (0xF << 12)
-#define USB3_POWER_PLL_CONTROL_PU_SHIFT 12
-#define USB3_POWER_PLL_CONTROL_PU (0xF << 12)
-
-#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK (0x1 << 12)
-#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT 12
-#define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT 14
-#define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT 15
-
-#define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK 0xF
-#define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT 0
-#define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK (0x7 << 4)
-#define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT 4
-#define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK (0x1F << 8)
-#define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT 8
-
-#define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK (0x1 << 15)
-#define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT 11
-
-#define USB3_GEN2_SET0_G2_TX_AMP_MASK (0x1F << 1)
-#define USB3_GEN2_SET0_G2_TX_AMP_SHIFT 1
-#define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT 6
-#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK (0xF << 7)
-#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT 7
-#define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK (0x1 << 11)
-#define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT 11
-#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK (0x1 << 15)
-#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT 15
-
-#define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK (0x7 << 0)
-#define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT 0
-#define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK (0x7 << 3)
-#define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT 3
-#define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK (0x3 << 6)
-#define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT 6
-#define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK (0x3 << 8)
-#define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT 8
-
-#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK (0x3 << 10)
-#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT 10
-
-#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK (0x7 << 12)
-#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT 12
-
-#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK (0x3F << 0)
-#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT 0
-
-#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK 0xF
-#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT 0
-#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK (0xF << 4)
-#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT 4
-#define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK (0x1 << 8)
-
-#define USB3_TXDETRX_VTHSEL_MASK (0x3 << 4)
-#define USB3_TXDETRX_VTHSEL_SHIFT 4
-
-#define USB3_TX_EMPPH_AMP_MASK (0xF << 0)
-#define USB3_TX_EMPPH_AMP_SHIFT 0
-#define USB3_TX_EMPPH_EN_MASK (0x1 << 6)
-#define USB3_TX_EMPPH_EN_SHIFT 6
-#define USB3_TX_EMPPH_AMP_FORCE_MASK (0x1 << 7)
-#define USB3_TX_EMPPH_AMP_FORCE_SHIFT 7
-#define USB3_TX_EMPPH_PAR1_MASK (0x1F << 8)
-#define USB3_TX_EMPPH_PAR1_SHIFT 8
-#define USB3_TX_EMPPH_PAR2_MASK (0x1 << 13)
-#define USB3_TX_EMPPH_PAR2_SHIFT 13
-
-#define USB3_PIPE_SM_CTRL_PHY_INIT_DONE 15
-
-#endif /* __MV_U3D_PHY_H */
diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c
index 17ea3f2..4e3877c 100644
--- a/drivers/usb/phy/phy-ulpi.c
+++ b/drivers/usb/phy/phy-ulpi.c
@@ -48,6 +48,7 @@ static struct ulpi_info ulpi_ids[] = {
ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"),
ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
ULPI_INFO(ULPI_ID(0x0424, 0x0007), "SMSC USB3320"),
+ ULPI_INFO(ULPI_ID(0x0424, 0x0009), "SMSC USB334x"),
ULPI_INFO(ULPI_ID(0x0451, 0x1507), "TI TUSB1210"),
};