Merge tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB pull request for 3.10-rc1.

  Lots of USB patches here, the majority being USB gadget changes and
  USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
  and individual driver updates.  We also finally got some chipidea
  fixes, which have been delayed for a number of kernel releases, as the
  maintainer has now reappeared.

  All of these have been in linux-next for a while"

* tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits)
  USB: ehci-msm: USB_MSM_OTG needs USB_PHY
  USB: OHCI: avoid conflicting platform drivers
  USB: OMAP: ISP1301 needs USB_PHY
  USB: lpc32xx: ISP1301 needs USB_PHY
  USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
  usb: phy: tegra: don't call into tegra-ehci directly
  usb: phy: phy core cannot yet be a module
  USB: Fix initconst in ehci driver
  usb-storage: CY7C68300A chips do not support Cypress ATACB
  USB: serial: option: Added support Olivetti Olicard 145
  USB: ftdi_sio: correct ST Micro Connect Lite PIDs
  ARM: mxs_defconfig: add CONFIG_USB_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
  usb: phy: remove exported function from __init section
  usb: gadget: zero: put function instances on unbind
  usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
  usb: gadget: cdc2: fix error return code in cdc_do_config()
  usb: gadget: multi: fix error return code in rndis_do_config()
  usb: gadget: f_obex: fix error return code in obex_bind()
  USB: storage: convert to use module_usb_driver()
  ...

41 files changed, 885 insertions, 1974 deletions

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 17b7f9a..1d55762 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig USB_SERIAL
 	tristate "USB Serial Converter support"
-	depends on USB && TTY
+	depends on TTY
 	---help---
 	  Say Y here if you have a USB device that provides normal serial
 	  ports, or acts like a serial device, and you want to connect it to
@@ -667,6 +667,23 @@ config USB_SERIAL_ZIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called zio.
 
+config USB_SERIAL_WISHBONE
+	tristate "USB-Wishbone adapter interface driver"
+	help
+	  Say Y here if you want to use a USB attached Wishbone bus.
+
+	  Wishbone is an open hardware SoC bus commonly used in FPGA
+	  designs. Bus access can be serialized using the Etherbone
+	  protocol <http://www.ohwr.org/projects/etherbone-core>.
+
+	  This driver is intended to be used with devices which attach
+	  their internal Wishbone bus to a USB serial interface using
+	  the Etherbone protocol. A userspace library is required to
+	  speak the protocol made available by this driver as ttyUSBx.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wishbone-serial.
+
 config USB_SERIAL_ZTE
 	tristate "ZTE USB serial driver"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index eaf5ca1..cec63fa 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
 obj-$(CONFIG_USB_SERIAL_WWAN)			+= usb_wwan.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
+obj-$(CONFIG_USB_SERIAL_WISHBONE)		+= wishbone-serial.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
 obj-$(CONFIG_USB_SERIAL_XIRCOM)			+= keyspan_pda.o
 obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL)		+= vivopay-serial.o
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 4775f82..3b16118 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -62,7 +62,6 @@ static int is_irda(struct usb_serial *serial)
 }
 
 struct ark3116_private {
-	struct async_icount	icount;
 	int			irda;	/* 1 for irda device */
 
 	/* protects hw register updates */
@@ -341,18 +340,15 @@ static void ark3116_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 
-	if (serial->dev) {
-		/* disable DMA */
-		ark3116_write_reg(serial, UART_FCR, 0);
-
-		/* deactivate interrupts */
-		ark3116_write_reg(serial, UART_IER, 0);
+	/* disable DMA */
+	ark3116_write_reg(serial, UART_FCR, 0);
 
-		usb_serial_generic_close(port);
-		if (serial->num_interrupt_in)
-			usb_kill_urb(port->interrupt_in_urb);
-	}
+	/* deactivate interrupts */
+	ark3116_write_reg(serial, UART_IER, 0);
 
+	usb_serial_generic_close(port);
+	if (serial->num_interrupt_in)
+		usb_kill_urb(port->interrupt_in_urb);
 }
 
 static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -405,31 +401,10 @@ err_out:
 	return result;
 }
 
-static int ark3116_get_icount(struct tty_struct *tty,
-					struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ark3116_private *priv = usb_get_serial_port_data(port);
-	struct async_icount cnow = priv->icount;
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-	return 0;
-}
-
 static int ark3116_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct ark3116_private *priv = usb_get_serial_port_data(port);
 	struct serial_struct serstruct;
 	void __user *user_arg = (void __user *)arg;
 
@@ -451,33 +426,6 @@ static int ark3116_ioctl(struct tty_struct *tty,
 		if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
 			return -EFAULT;
 		return 0;
-	case TIOCMIWAIT:
-		for (;;) {
-			struct async_icount prev = priv->icount;
-			interruptible_sleep_on(&port->delta_msr_wait);
-			/* see if a signal did it */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-
-			if (port->serial->disconnected)
-				return -EIO;
-
-			if ((prev.rng == priv->icount.rng) &&
-			    (prev.dsr == priv->icount.dsr) &&
-			    (prev.dcd == priv->icount.dcd) &&
-			    (prev.cts == priv->icount.cts))
-				return -EIO;
-			if ((arg & TIOCM_RNG &&
-			     (prev.rng != priv->icount.rng)) ||
-			    (arg & TIOCM_DSR &&
-			     (prev.dsr != priv->icount.dsr)) ||
-			    (arg & TIOCM_CD  &&
-			     (prev.dcd != priv->icount.dcd)) ||
-			    (arg & TIOCM_CTS &&
-			     (prev.cts != priv->icount.cts)))
-				return 0;
-		}
-		break;
 	}
 
 	return -ENOIOCTLCMD;
@@ -575,14 +523,14 @@ static void ark3116_update_msr(struct usb_serial_port *port, __u8 msr)
 	if (msr & UART_MSR_ANY_DELTA) {
 		/* update input line counters */
 		if (msr & UART_MSR_DCTS)
-			priv->icount.cts++;
+			port->icount.cts++;
 		if (msr & UART_MSR_DDSR)
-			priv->icount.dsr++;
+			port->icount.dsr++;
 		if (msr & UART_MSR_DDCD)
-			priv->icount.dcd++;
+			port->icount.dcd++;
 		if (msr & UART_MSR_TERI)
-			priv->icount.rng++;
-		wake_up_interruptible(&port->delta_msr_wait);
+			port->icount.rng++;
+		wake_up_interruptible(&port->port.delta_msr_wait);
 	}
 }
 
@@ -598,13 +546,13 @@ static void ark3116_update_lsr(struct usb_serial_port *port, __u8 lsr)
 
 	if (lsr&UART_LSR_BRK_ERROR_BITS) {
 		if (lsr & UART_LSR_BI)
-			priv->icount.brk++;
+			port->icount.brk++;
 		if (lsr & UART_LSR_FE)
-			priv->icount.frame++;
+			port->icount.frame++;
 		if (lsr & UART_LSR_PE)
-			priv->icount.parity++;
+			port->icount.parity++;
 		if (lsr & UART_LSR_OE)
-			priv->icount.overrun++;
+			port->icount.overrun++;
 	}
 }
 
@@ -722,7 +670,8 @@ static struct usb_serial_driver ark3116_device = {
 	.ioctl =		ark3116_ioctl,
 	.tiocmget =		ark3116_tiocmget,
 	.tiocmset =		ark3116_tiocmset,
-	.get_icount =		ark3116_get_icount,
+	.tiocmiwait =		usb_serial_generic_tiocmiwait,
+	.get_icount =		usb_serial_generic_get_icount,
 	.open =			ark3116_open,
 	.close =		ark3116_close,
 	.break_ctl = 		ark3116_break_ctl,
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 37decb1..3c4db6d 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -106,14 +106,15 @@ static int usb_serial_device_remove(struct device *dev)
 	/* make sure suspend/resume doesn't race against port_remove */
 	usb_autopm_get_interface(port->serial->interface);
 
+	minor = port->number;
+	tty_unregister_device(usb_serial_tty_driver, minor);
+
 	device_remove_file(&port->dev, &dev_attr_port_number);
 
 	driver = port->serial->type;
 	if (driver->port_remove)
 		retval = driver->port_remove(port);
 
-	minor = port->number;
-	tty_unregister_device(usb_serial_tty_driver, minor);
 	dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
 		 driver->description, minor);
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 07d4650..c2a4171 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -296,7 +296,6 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 		priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
 	spin_unlock_irqrestore(&priv->lock, flags);
 	ch341_set_handshake(port->serial->dev, priv->line_control);
-	wake_up_interruptible(&port->delta_msr_wait);
 }
 
 static void ch341_close(struct usb_serial_port *port)
@@ -489,7 +488,7 @@ static void ch341_read_int_callback(struct urb *urb)
 			tty_kref_put(tty);
 		}
 
-		wake_up_interruptible(&port->delta_msr_wait);
+		wake_up_interruptible(&port->port.delta_msr_wait);
 	}
 
 exit:
@@ -500,8 +499,9 @@ exit:
 			__func__, status);
 }
 
-static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+static int ch341_tiocmiwait(struct tty_struct *tty, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 prevstatus;
@@ -515,7 +515,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (!multi_change) {
-		interruptible_sleep_on(&port->delta_msr_wait);
+		interruptible_sleep_on(&port->port.delta_msr_wait);
 		/* see if a signal did it */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
@@ -542,26 +542,6 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	return 0;
 }
 
-static int ch341_ioctl(struct tty_struct *tty,
-			unsigned int cmd, unsigned long arg)
-{
-	struct usb_serial_port *port = tty->driver_data;
-
-	dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, port->number, cmd);
-
-	switch (cmd) {
-	case TIOCMIWAIT:
-		dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,  port->number);
-		return wait_modem_info(port, arg);
-
-	default:
-		dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd);
-		break;
-	}
-
-	return -ENOIOCTLCMD;
-}
-
 static int ch341_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -611,11 +591,11 @@ static struct usb_serial_driver ch341_device = {
 	.dtr_rts	   = ch341_dtr_rts,
 	.carrier_raised	   = ch341_carrier_raised,
 	.close             = ch341_close,
-	.ioctl             = ch341_ioctl,
 	.set_termios       = ch341_set_termios,
 	.break_ctl         = ch341_break_ctl,
 	.tiocmget          = ch341_tiocmget,
 	.tiocmset          = ch341_tiocmset,
+	.tiocmiwait        = ch341_tiocmiwait,
 	.read_int_callback = ch341_read_int_callback,
 	.port_probe        = ch341_port_probe,
 	.port_remove       = ch341_port_remove,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 4747d1c..2c65955 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -462,11 +462,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 static void cp210x_close(struct usb_serial_port *port)
 {
 	usb_serial_generic_close(port);
-
-	mutex_lock(&port->serial->disc_mutex);
-	if (!port->serial->disconnected)
-		cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
-	mutex_unlock(&port->serial->disc_mutex);
+	cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
 }
 
 /*
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 629bd28..7814262 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -51,7 +51,6 @@
 #define CYBERJACK_PRODUCT_ID	0x0100
 
 /* Function prototypes */
-static void cyberjack_disconnect(struct usb_serial *serial);
 static int cyberjack_port_probe(struct usb_serial_port *port);
 static int cyberjack_port_remove(struct usb_serial_port *port);
 static int  cyberjack_open(struct tty_struct *tty,
@@ -79,7 +78,6 @@ static struct usb_serial_driver cyberjack_device = {
 	.description =		"Reiner SCT Cyberjack USB card reader",
 	.id_table =		id_table,
 	.num_ports =		1,
-	.disconnect =		cyberjack_disconnect,
 	.port_probe =		cyberjack_port_probe,
 	.port_remove =		cyberjack_port_remove,
 	.open =			cyberjack_open,
@@ -130,20 +128,14 @@ static int cyberjack_port_remove(struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
 
+	usb_kill_urb(port->interrupt_in_urb);
+
 	priv = usb_get_serial_port_data(port);
 	kfree(priv);
 
 	return 0;
 }
 
-static void cyberjack_disconnect(struct usb_serial *serial)
-{
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i)
-		usb_kill_urb(serial->port[i]->interrupt_in_urb);
-}
-
 static int  cyberjack_open(struct tty_struct *tty,
 					struct usb_serial_port *port)
 {
@@ -166,11 +158,8 @@ static int  cyberjack_open(struct tty_struct *tty,
 
 static void cyberjack_close(struct usb_serial_port *port)
 {
-	if (port->serial->dev) {
-		/* shutdown any bulk reads that might be going on */
-		usb_kill_urb(port->write_urb);
-		usb_kill_urb(port->read_urb);
-	}
+	usb_kill_urb(port->write_urb);
+	usb_kill_urb(port->read_urb);
 }
 
 static int cyberjack_write(struct tty_struct *tty,
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index ba7352e..d341555 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -129,13 +129,12 @@ static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static void cypress_send(struct usb_serial_port *port);
 static int  cypress_write_room(struct tty_struct *tty);
-static int  cypress_ioctl(struct tty_struct *tty,
-			unsigned int cmd, unsigned long arg);
 static void cypress_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static int  cypress_tiocmget(struct tty_struct *tty);
 static int  cypress_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
+static int  cypress_tiocmiwait(struct tty_struct *tty, unsigned long arg);
 static int  cypress_chars_in_buffer(struct tty_struct *tty);
 static void cypress_throttle(struct tty_struct *tty);
 static void cypress_unthrottle(struct tty_struct *tty);
@@ -158,10 +157,10 @@ static struct usb_serial_driver cypress_earthmate_device = {
 	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
-	.ioctl =			cypress_ioctl,
 	.set_termios =			cypress_set_termios,
 	.tiocmget =			cypress_tiocmget,
 	.tiocmset =			cypress_tiocmset,
+	.tiocmiwait =			cypress_tiocmiwait,
 	.chars_in_buffer =		cypress_chars_in_buffer,
 	.throttle =		 	cypress_throttle,
 	.unthrottle =			cypress_unthrottle,
@@ -184,10 +183,10 @@ static struct usb_serial_driver cypress_hidcom_device = {
 	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
-	.ioctl =			cypress_ioctl,
 	.set_termios =			cypress_set_termios,
 	.tiocmget =			cypress_tiocmget,
 	.tiocmset =			cypress_tiocmset,
+	.tiocmiwait =			cypress_tiocmiwait,
 	.chars_in_buffer =		cypress_chars_in_buffer,
 	.throttle =			cypress_throttle,
 	.unthrottle =			cypress_unthrottle,
@@ -210,10 +209,10 @@ static struct usb_serial_driver cypress_ca42v2_device = {
 	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
-	.ioctl =			cypress_ioctl,
 	.set_termios =			cypress_set_termios,
 	.tiocmget =			cypress_tiocmget,
 	.tiocmset =			cypress_tiocmset,
+	.tiocmiwait =			cypress_tiocmiwait,
 	.chars_in_buffer =		cypress_chars_in_buffer,
 	.throttle =			cypress_throttle,
 	.unthrottle =			cypress_unthrottle,
@@ -633,12 +632,6 @@ static void cypress_close(struct usb_serial_port *port)
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
-	/* writing is potentially harmful, lock must be taken */
-	mutex_lock(&port->serial->disc_mutex);
-	if (port->serial->disconnected) {
-		mutex_unlock(&port->serial->disc_mutex);
-		return;
-	}
 	spin_lock_irqsave(&priv->lock, flags);
 	kfifo_reset_out(&priv->write_fifo);
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -650,7 +643,6 @@ static void cypress_close(struct usb_serial_port *port)
 	if (stats)
 		dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 			priv->bytes_in, priv->bytes_out, priv->cmd_count);
-	mutex_unlock(&port->serial->disc_mutex);
 } /* cypress_close */
 
 
@@ -855,55 +847,43 @@ static int cypress_tiocmset(struct tty_struct *tty,
 }
 
 
-static int cypress_ioctl(struct tty_struct *tty,
-					unsigned int cmd, unsigned long arg)
+static int cypress_tiocmiwait(struct tty_struct *tty, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
-
-	dev_dbg(&port->dev, "%s - port %d, cmd 0x%.4x\n", __func__, port->number, cmd);
-
-	switch (cmd) {
-	/* This code comes from drivers/char/serial.c and ftdi_sio.c */
-	case TIOCMIWAIT:
-		for (;;) {
-			interruptible_sleep_on(&port->delta_msr_wait);
-			/* see if a signal did it */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-
-			if (port->serial->disconnected)
-				return -EIO;
-
-			{
-				char diff = priv->diff_status;
-				if (diff == 0)
-					return -EIO; /* no change => error */
-
-				/* consume all events */
-				priv->diff_status = 0;
-
-				/* return 0 if caller wanted to know about
-				   these bits */
-				if (((arg & TIOCM_RNG) && (diff & UART_RI)) ||
-				    ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
-				    ((arg & TIOCM_CD) && (diff & UART_CD)) ||
-				    ((arg & TIOCM_CTS) && (diff & UART_CTS)))
-					return 0;
-				/* otherwise caller can't care less about what
-				 * happened, and so we continue to wait for
-				 * more events.
-				 */
-			}
-		}
-		return 0;
-	default:
-		break;
+	char diff;
+
+	for (;;) {
+		interruptible_sleep_on(&port->port.delta_msr_wait);
+		/* see if a signal did it */
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+
+		if (port->serial->disconnected)
+			return -EIO;
+
+		diff = priv->diff_status;
+		if (diff == 0)
+			return -EIO; /* no change => error */
+
+		/* consume all events */
+		priv->diff_status = 0;
+
+		/* return 0 if caller wanted to know about
+		   these bits */
+		if (((arg & TIOCM_RNG) && (diff & UART_RI))  ||
+			((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
+			((arg & TIOCM_CD)  && (diff & UART_CD))  ||
+			((arg & TIOCM_CTS) && (diff & UART_CTS)))
+			return 0;
+		/* otherwise caller can't care less about what
+		 * happened, and so we continue to wait for
+		 * more events.
+		 */
 	}
-	dev_dbg(&port->dev, "%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h\n", __func__, cmd);
-	return -ENOIOCTLCMD;
-} /* cypress_ioctl */
 
+	return 0;
+}
 
 static void cypress_set_termios(struct tty_struct *tty,
 	struct usb_serial_port *port, struct ktermios *old_termios)
@@ -1189,7 +1169,7 @@ static void cypress_read_int_callback(struct urb *urb)
 	if (priv->current_status != priv->prev_status) {
 		priv->diff_status |= priv->current_status ^
 			priv->prev_status;
-		wake_up_interruptible(&port->delta_msr_wait);
+		wake_up_interruptible(&port->port.delta_msr_wait);
 		priv->prev_status = priv->current_status;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 3119158..7b807d3 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -196,7 +196,6 @@ struct digi_port {
 	unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE];
 	int dp_write_urb_in_use;
 	unsigned int dp_modem_signals;
-	wait_queue_head_t dp_modem_change_wait;
 	int dp_transmit_idle;
 	wait_queue_head_t dp_transmit_idle_wait;
 	int dp_throttled;
@@ -1138,53 +1137,51 @@ static void digi_close(struct usb_serial_port *port)
 	if (port->serial->disconnected)
 		goto exit;
 
-	if (port->serial->dev) {
-		/* FIXME: Transmit idle belongs in the wait_unti_sent path */
-		digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
-
-		/* disable input flow control */
-		buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
-		buf[1] = priv->dp_port_num;
-		buf[2] = DIGI_DISABLE;
-		buf[3] = 0;
-
-		/* disable output flow control */
-		buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
-		buf[5] = priv->dp_port_num;
-		buf[6] = DIGI_DISABLE;
-		buf[7] = 0;
-
-		/* disable reading modem signals automatically */
-		buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
-		buf[9] = priv->dp_port_num;
-		buf[10] = DIGI_DISABLE;
-		buf[11] = 0;
-
-		/* disable receive */
-		buf[12] = DIGI_CMD_RECEIVE_ENABLE;
-		buf[13] = priv->dp_port_num;
-		buf[14] = DIGI_DISABLE;
-		buf[15] = 0;
-
-		/* flush fifos */
-		buf[16] = DIGI_CMD_IFLUSH_FIFO;
-		buf[17] = priv->dp_port_num;
-		buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
-		buf[19] = 0;
-
-		ret = digi_write_oob_command(port, buf, 20, 0);
-		if (ret != 0)
-			dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n", ret);
-
-		/* wait for final commands on oob port to complete */
-		prepare_to_wait(&priv->dp_flush_wait, &wait,
-							TASK_INTERRUPTIBLE);
-		schedule_timeout(DIGI_CLOSE_TIMEOUT);
-		finish_wait(&priv->dp_flush_wait, &wait);
-
-		/* shutdown any outstanding bulk writes */
-		usb_kill_urb(port->write_urb);
-	}
+	/* FIXME: Transmit idle belongs in the wait_unti_sent path */
+	digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
+
+	/* disable input flow control */
+	buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
+	buf[1] = priv->dp_port_num;
+	buf[2] = DIGI_DISABLE;
+	buf[3] = 0;
+
+	/* disable output flow control */
+	buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
+	buf[5] = priv->dp_port_num;
+	buf[6] = DIGI_DISABLE;
+	buf[7] = 0;
+
+	/* disable reading modem signals automatically */
+	buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
+	buf[9] = priv->dp_port_num;
+	buf[10] = DIGI_DISABLE;
+	buf[11] = 0;
+
+	/* disable receive */
+	buf[12] = DIGI_CMD_RECEIVE_ENABLE;
+	buf[13] = priv->dp_port_num;
+	buf[14] = DIGI_DISABLE;
+	buf[15] = 0;
+
+	/* flush fifos */
+	buf[16] = DIGI_CMD_IFLUSH_FIFO;
+	buf[17] = priv->dp_port_num;
+	buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
+	buf[19] = 0;
+
+	ret = digi_write_oob_command(port, buf, 20, 0);
+	if (ret != 0)
+		dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n",
+									ret);
+	/* wait for final commands on oob port to complete */
+	prepare_to_wait(&priv->dp_flush_wait, &wait,
+			TASK_INTERRUPTIBLE);
+	schedule_timeout(DIGI_CLOSE_TIMEOUT);
+	finish_wait(&priv->dp_flush_wait, &wait);
+
+	/* shutdown any outstanding bulk writes */
+	usb_kill_urb(port->write_urb);
 exit:
 	spin_lock_irq(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;
@@ -1241,7 +1238,6 @@ static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
 
 	spin_lock_init(&priv->dp_port_lock);
 	priv->dp_port_num = port_num;
-	init_waitqueue_head(&priv->dp_modem_change_wait);
 	init_waitqueue_head(&priv->dp_transmit_idle_wait);
 	init_waitqueue_head(&priv->dp_flush_wait);
 	init_waitqueue_head(&priv->dp_close_wait);
@@ -1532,7 +1528,6 @@ static int digi_read_oob_callback(struct urb *urb)
 			else
 				priv->dp_modem_signals &= ~TIOCM_CD;
 
-			wake_up_interruptible(&priv->dp_modem_change_wait);
 			spin_unlock(&priv->dp_port_lock);
 		} else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
 			spin_lock(&priv->dp_port_lock);
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index a172ad5..090b411 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -110,7 +110,7 @@ static void f81232_process_read_urb(struct urb *urb)
 	line_status = priv->line_status;
 	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	wake_up_interruptible(&port->delta_msr_wait);
+	wake_up_interruptible(&port->port.delta_msr_wait);
 
 	if (!urb->actual_length)
 		return;
@@ -242,8 +242,9 @@ static int f81232_carrier_raised(struct usb_serial_port *port)
 	return 0;
 }
 
-static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+static int f81232_tiocmiwait(struct tty_struct *tty, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct f81232_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int prevstatus;
@@ -255,7 +256,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (1) {
-		interruptible_sleep_on(&port->delta_msr_wait);
+		interruptible_sleep_on(&port->port.delta_msr_wait);
 		/* see if a signal did it */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
@@ -302,11 +303,6 @@ static int f81232_ioctl(struct tty_struct *tty,
 			return -EFAULT;
 
 		return 0;
-
-	case TIOCMIWAIT:
-		dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,
-			port->number);
-		return wait_modem_info(port, arg);
 	default:
 		dev_dbg(&port->dev, "%s not supported = 0x%04x\n",
 			__func__, cmd);
@@ -358,6 +354,7 @@ static struct usb_serial_driver f81232_device = {
 	.set_termios =		f81232_set_termios,
 	.tiocmget =		f81232_tiocmget,
 	.tiocmset =		f81232_tiocmset,
+	.tiocmiwait =		f81232_tiocmiwait,
 	.process_read_urb =	f81232_process_read_urb,
 	.read_int_callback =	f81232_read_int_callback,
 	.port_probe =		f81232_port_probe,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9886180..242b577 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1,7 +1,7 @@
 /*
  * USB FTDI SIO driver
  *
- *	Copyright (C) 2009 - 2010
+ *	Copyright (C) 2009 - 2013
  *	    Johan Hovold (jhovold@gmail.com)
  *	Copyright (C) 1999 - 2001
  *	    Greg Kroah-Hartman (greg@kroah.com)
@@ -55,7 +55,6 @@ static __u16 vendor = FTDI_VID;
 static __u16 product;
 
 struct ftdi_private {
-	struct kref kref;
 	enum ftdi_chip_type chip_type;
 				/* type of device, either SIO or FT8U232AM */
 	int baud_base;		/* baud base clock for divisor setting */
@@ -68,7 +67,6 @@ struct ftdi_private {
 				 */
 	int flags;		/* some ASYNC_xxxx flags are supported */
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
-	struct async_icount	icount;
 	char prev_status;        /* Used for TIOCMIWAIT */
 	char transmit_empty;	/* If transmitter is empty or not */
 	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
@@ -189,6 +187,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) },
 	{ USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
@@ -870,7 +869,9 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
 	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+	{ USB_DEVICE(ST_VID, ST_STMCLT_2232_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(ST_VID, ST_STMCLT_4232_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
@@ -911,7 +912,6 @@ static int  ftdi_sio_probe(struct usb_serial *serial,
 static int  ftdi_sio_port_probe(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove(struct usb_serial_port *port);
 static int  ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void ftdi_close(struct usb_serial_port *port);
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
 static void ftdi_process_read_urb(struct urb *urb);
 static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
@@ -921,8 +921,6 @@ static void ftdi_set_termios(struct tty_struct *tty,
 static int  ftdi_tiocmget(struct tty_struct *tty);
 static int  ftdi_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
-static int ftdi_get_icount(struct tty_struct *tty,
-			   struct serial_icounter_struct *icount);
 static int  ftdi_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
@@ -951,7 +949,6 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.port_probe =		ftdi_sio_port_probe,
 	.port_remove =		ftdi_sio_port_remove,
 	.open =			ftdi_open,
-	.close =		ftdi_close,
 	.dtr_rts =		ftdi_dtr_rts,
 	.throttle =		usb_serial_generic_throttle,
 	.unthrottle =		usb_serial_generic_unthrottle,
@@ -959,7 +956,8 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.prepare_write_buffer =	ftdi_prepare_write_buffer,
 	.tiocmget =		ftdi_tiocmget,
 	.tiocmset =		ftdi_tiocmset,
-	.get_icount =           ftdi_get_icount,
+	.tiocmiwait =		usb_serial_generic_tiocmiwait,
+	.get_icount =           usb_serial_generic_get_icount,
 	.ioctl =		ftdi_ioctl,
 	.set_termios =		ftdi_set_termios,
 	.break_ctl =		ftdi_break_ctl,
@@ -1688,7 +1686,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 	}
 
-	kref_init(&priv->kref);
 	mutex_init(&priv->cfg_lock);
 
 	priv->flags = ASYNC_LOW_LATENCY;
@@ -1792,20 +1789,24 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 }
 
 /*
- * First and second port on STMCLiteadaptors is reserved for JTAG interface
- * and the forth port for pio
+ * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's
+ * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and
+ * can be accessed from userspace.
+ * The next two ports are enabled as UARTs by default, where port 2 is
+ * a conventional RS-232 UART.
  */
 static int ftdi_stmclite_probe(struct usb_serial *serial)
 {
 	struct usb_device *udev = serial->dev;
 	struct usb_interface *interface = serial->interface;
 
-	if (interface == udev->actconfig->interface[2])
-		return 0;
-
-	dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+	if (interface == udev->actconfig->interface[0] ||
+	    interface == udev->actconfig->interface[1]) {
+		dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+		return -ENODEV;
+	}
 
-	return -ENODEV;
+	return 0;
 }
 
 /*
@@ -1826,22 +1827,13 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
 	return 0;
 }
 
-static void ftdi_sio_priv_release(struct kref *k)
-{
-	struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
-
-	kfree(priv);
-}
-
 static int ftdi_sio_port_remove(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	wake_up_interruptible(&port->delta_msr_wait);
-
 	remove_sysfs_attrs(port);
 
-	kref_put(&priv->kref, ftdi_sio_priv_release);
+	kfree(priv);
 
 	return 0;
 }
@@ -1851,7 +1843,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct ktermios dummy;
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	int result;
 
 	/* No error checking for this (will get errors later anyway) */
 	/* See ftdi_sio.h for description of what is reset */
@@ -1870,12 +1861,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 		ftdi_set_termios(tty, port, &dummy);
 	}
 
-	/* Start reading from the device */
-	result = usb_serial_generic_open(tty, port);
-	if (!result)
-		kref_get(&priv->kref);
-
-	return result;
+	return usb_serial_generic_open(tty, port);
 }
 
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
@@ -1900,19 +1886,6 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 }
 
-/*
- * usbserial:__serial_close  only calls ftdi_close if the point is open
- *
- *   This only gets called when it is the last close
- */
-static void ftdi_close(struct usb_serial_port *port)
-{
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-
-	usb_serial_generic_close(port);
-	kref_put(&priv->kref, ftdi_sio_priv_release);
-}
-
 /* The SIO requires the first byte to have:
  *  B0 1
  *  B1 0
@@ -1940,7 +1913,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
 			c = kfifo_out(&port->write_fifo, &buffer[i + 1], len);
 			if (!c)
 				break;
-			priv->icount.tx += c;
+			port->icount.tx += c;
 			buffer[i] = (c << 2) + 1;
 			count += c + 1;
 		}
@@ -1948,7 +1921,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
 	} else {
 		count = kfifo_out_locked(&port->write_fifo, dest, size,
 								&port->lock);
-		priv->icount.tx += count;
+		port->icount.tx += count;
 	}
 
 	return count;
@@ -1977,15 +1950,15 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		char diff_status = status ^ priv->prev_status;
 
 		if (diff_status & FTDI_RS0_CTS)
-			priv->icount.cts++;
+			port->icount.cts++;
 		if (diff_status & FTDI_RS0_DSR)
-			priv->icount.dsr++;
+			port->icount.dsr++;
 		if (diff_status & FTDI_RS0_RI)
-			priv->icount.rng++;
+			port->icount.rng++;
 		if (diff_status & FTDI_RS0_RLSD)
-			priv->icount.dcd++;
+			port->icount.dcd++;
 
-		wake_up_interruptible(&port->delta_msr_wait);
+		wake_up_interruptible(&port->port.delta_msr_wait);
 		priv->prev_status = status;
 	}
 
@@ -1995,18 +1968,18 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		 * over framing errors */
 		if (packet[1] & FTDI_RS_BI) {
 			flag = TTY_BREAK;
-			priv->icount.brk++;
+			port->icount.brk++;
 			usb_serial_handle_break(port);
 		} else if (packet[1] & FTDI_RS_PE) {
 			flag = TTY_PARITY;
-			priv->icount.parity++;
+			port->icount.parity++;
 		} else if (packet[1] & FTDI_RS_FE) {
 			flag = TTY_FRAME;
-			priv->icount.frame++;
+			port->icount.frame++;
 		}
 		/* Overrun is special, not associated with a char */
 		if (packet[1] & FTDI_RS_OE) {
-			priv->icount.overrun++;
+			port->icount.overrun++;
 			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
 		}
 	}
@@ -2020,7 +1993,7 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 	len -= 2;
 	if (!len)
 		return 0;	/* status only */
-	priv->icount.rx += len;
+	port->icount.rx += len;
 	ch = packet + 2;
 
 	if (port->port.console && port->sysrq) {
@@ -2384,34 +2357,10 @@ static int ftdi_tiocmset(struct tty_struct *tty,
 	return update_mctrl(port, set, clear);
 }
 
-static int ftdi_get_icount(struct tty_struct *tty,
-				struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct async_icount *ic = &priv->icount;
-
-	icount->cts = ic->cts;
-	icount->dsr = ic->dsr;
-	icount->rng = ic->rng;
-	icount->dcd = ic->dcd;
-	icount->tx = ic->tx;
-	icount->rx = ic->rx;
-	icount->frame = ic->frame;
-	icount->parity = ic->parity;
-	icount->overrun = ic->overrun;
-	icount->brk = ic->brk;
-	icount->buf_overrun = ic->buf_overrun;
-	return 0;
-}
-
 static int ftdi_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct async_icount cnow;
-	struct async_icount cprev;
 
 	dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd);
 
@@ -2425,35 +2374,6 @@ static int ftdi_ioctl(struct tty_struct *tty,
 	case TIOCSSERIAL: /* sets serial port data */
 		return set_serial_info(tty, port,
 					(struct serial_struct __user *) arg);
-
-	/*
-	 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-	 * - mask passed in arg for lines of interest
-	 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-	 * Caller should use TIOCGICOUNT to see which one it was.
-	 *
-	 * This code is borrowed from linux/drivers/char/serial.c
-	 */
-	case TIOCMIWAIT:
-		cprev = priv->icount;
-		for (;;) {
-			interruptible_sleep_on(&port->delta_msr_wait);
-			/* see if a signal did it */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-
-			if (port->serial->disconnected)
-				return -EIO;
-
-			cnow = priv->icount;
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
-				return 0;
-			}
-			cprev = cnow;
-		}
 	case TIOCSERGETLSR:
 		return get_lsr_info(port, (struct serial_struct __user *)arg);
 		break;
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index e79861e..9852827 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -74,6 +74,7 @@
 #define FTDI_OPENDCC_THROTTLE_PID	0xBFDA
 #define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
 #define FTDI_OPENDCC_GBM_PID	0xBFDC
+#define FTDI_OPENDCC_GBM_BOOST_PID	0xBFDD
 
 /* NZR SEM 16+ USB (http://www.nzr.de) */
 #define FTDI_NZR_SEM_USB_PID	0xC1E0	/* NZR SEM-LOG16+ */
@@ -1150,7 +1151,8 @@
  * STMicroelectonics
  */
 #define ST_VID			0x0483
-#define ST_STMCLT1030_PID	0x3747 /* ST Micro Connect Lite STMCLT1030 */
+#define ST_STMCLT_2232_PID	0x3746
+#define ST_STMCLT_4232_PID	0x3747
 
 /*
  * Papouch products (http://www.papouch.com/)
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 81caf56..b110c57 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -946,16 +946,12 @@ static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void garmin_close(struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
 	dev_dbg(&port->dev, "%s - port %d - mode=%d state=%d flags=0x%X\n",
 		__func__, port->number, garmin_data_p->mode,
 		garmin_data_p->state, garmin_data_p->flags);
 
-	if (!serial)
-		return;
-
 	garmin_clear(garmin_data_p);
 
 	/* shutdown our urbs */
@@ -1185,17 +1181,11 @@ static void garmin_read_bulk_callback(struct urb *urb)
 {
 	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
-	struct usb_serial *serial =  port->serial;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	unsigned char *data = urb->transfer_buffer;
 	int status = urb->status;
 	int retval;
 
-	if (!serial) {
-		dev_dbg(&urb->dev->dev, "%s - bad serial pointer, exiting\n", __func__);
-		return;
-	}
-
 	if (status) {
 		dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n",
 			__func__, status);
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 4c5c23f..297665f 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -1,7 +1,7 @@
 /*
  * USB Serial Converter Generic functions
  *
- * Copyright (C) 2010 - 2011 Johan Hovold (jhovold@gmail.com)
+ * Copyright (C) 2010 - 2013 Johan Hovold (jhovold@gmail.com)
  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
  *
  *	This program is free software; you can redistribute it and/or
@@ -45,8 +45,6 @@ struct usb_serial_driver usb_serial_generic_device = {
 	},
 	.id_table =		generic_device_ids,
 	.num_ports =		1,
-	.disconnect =		usb_serial_generic_disconnect,
-	.release =		usb_serial_generic_release,
 	.throttle =		usb_serial_generic_throttle,
 	.unthrottle =		usb_serial_generic_unthrottle,
 	.resume =		usb_serial_generic_resume,
@@ -102,32 +100,23 @@ int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_open);
 
-static void generic_cleanup(struct usb_serial_port *port)
+void usb_serial_generic_close(struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
 	unsigned long flags;
 	int i;
 
-	if (serial->dev) {
-		/* shutdown any bulk transfers that might be going on */
-		if (port->bulk_out_size) {
-			for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
-				usb_kill_urb(port->write_urbs[i]);
+	if (port->bulk_out_size) {
+		for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+			usb_kill_urb(port->write_urbs[i]);
 
-			spin_lock_irqsave(&port->lock, flags);
-			kfifo_reset_out(&port->write_fifo);
-			spin_unlock_irqrestore(&port->lock, flags);
-		}
-		if (port->bulk_in_size) {
-			for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
-				usb_kill_urb(port->read_urbs[i]);
-		}
+		spin_lock_irqsave(&port->lock, flags);
+		kfifo_reset_out(&port->write_fifo);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+	if (port->bulk_in_size) {
+		for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+			usb_kill_urb(port->read_urbs[i]);
 	}
-}
-
-void usb_serial_generic_close(struct usb_serial_port *port)
-{
-	generic_cleanup(port);
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_close);
 
@@ -272,8 +261,7 @@ static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
 	if (!test_and_clear_bit(index, &port->read_urbs_free))
 		return 0;
 
-	dev_dbg(&port->dev, "%s - port %d, urb %d\n", __func__,
-		port->number, index);
+	dev_dbg(&port->dev, "%s - urb %d\n", __func__, index);
 
 	res = usb_submit_urb(port->read_urbs[index], mem_flags);
 	if (res) {
@@ -347,8 +335,8 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
 	}
 	set_bit(i, &port->read_urbs_free);
 
-	dev_dbg(&port->dev, "%s - port %d, urb %d, len %d\n",
-		__func__, port->number, i, urb->actual_length);
+	dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i,
+							urb->actual_length);
 
 	if (urb->status) {
 		dev_dbg(&port->dev, "%s - non-zero urb status: %d\n",
@@ -430,6 +418,91 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle);
 
+static bool usb_serial_generic_msr_changed(struct tty_struct *tty,
+				unsigned long arg, struct async_icount *cprev)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+	bool ret;
+
+	/*
+	 * Use tty-port initialised flag to detect all hangups including the
+	 * one generated at USB-device disconnect.
+	 *
+	 * FIXME: Remove hupping check once tty_port_hangup calls shutdown
+	 *        (which clears the initialised flag) before wake up.
+	 */
+	if (test_bit(TTY_HUPPING, &tty->flags))
+		return true;
+	if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+		return true;
+
+	spin_lock_irqsave(&port->lock, flags);
+	cnow = port->icount;				/* atomic copy*/
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	ret =	((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
+		((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
+		((arg & TIOCM_CD)  && (cnow.dcd != cprev->dcd)) ||
+		((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
+
+	*cprev = cnow;
+
+	return ret;
+}
+
+int usb_serial_generic_tiocmiwait(struct tty_struct *tty, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&port->lock, flags);
+	cnow = port->icount;				/* atomic copy */
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	ret = wait_event_interruptible(port->port.delta_msr_wait,
+			usb_serial_generic_msr_changed(tty, arg, &cnow));
+	if (!ret) {
+		if (test_bit(TTY_HUPPING, &tty->flags))
+			ret = -EIO;
+		if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+			ret = -EIO;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_tiocmiwait);
+
+int usb_serial_generic_get_icount(struct tty_struct *tty,
+					struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	cnow = port->icount;				/* atomic copy */
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->tx = cnow.tx;
+	icount->rx = cnow.rx;
+	icount->frame = cnow.frame;
+	icount->parity = cnow.parity;
+	icount->overrun = cnow.overrun;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_get_icount);
+
 #ifdef CONFIG_MAGIC_SYSRQ
 int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch)
 {
@@ -473,8 +546,7 @@ void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
 {
 	struct tty_port *port = &usb_port->port;
 
-	dev_dbg(&usb_port->dev, "%s - port %d, status %d\n", __func__,
-		usb_port->number, status);
+	dev_dbg(&usb_port->dev, "%s - status %d\n", __func__, status);
 
 	if (status)
 		wake_up_interruptible(&port->open_wait);
@@ -510,17 +582,3 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 	return c ? -EIO : 0;
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
-
-void usb_serial_generic_disconnect(struct usb_serial *serial)
-{
-	int i;
-
-	/* stop reads and writes on all ports */
-	for (i = 0; i < serial->num_ports; ++i)
-		generic_cleanup(serial->port[i]);
-}
-EXPORT_SYMBOL_GPL(usb_serial_generic_disconnect);
-
-void usb_serial_generic_release(struct usb_serial *serial)
-{
-}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index cf0b0a2..1477e85 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -111,7 +111,6 @@ struct edgeport_port {
 	wait_queue_head_t	wait_open;		/* for handling sleeping while waiting for open to finish */
 	wait_queue_head_t	wait_command;		/* for handling sleeping while waiting for command to finish */
 
-	struct async_icount	icount;
 	struct usb_serial_port	*port;			/* loop back to the owner of this object */
 };
 
@@ -215,8 +214,6 @@ static void edge_break(struct tty_struct *tty, int break_state);
 static int  edge_tiocmget(struct tty_struct *tty);
 static int  edge_tiocmset(struct tty_struct *tty,
 					unsigned int set, unsigned int clear);
-static int  edge_get_icount(struct tty_struct *tty,
-				struct serial_icounter_struct *icount);
 static int  edge_startup(struct usb_serial *serial);
 static void edge_disconnect(struct usb_serial *serial);
 static void edge_release(struct usb_serial *serial);
@@ -867,9 +864,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	init_waitqueue_head(&edge_port->wait_chase);
 	init_waitqueue_head(&edge_port->wait_command);
 
-	/* initialize our icount structure */
-	memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
-
 	/* initialize our port settings */
 	edge_port->txCredits = 0;	/* Can't send any data yet */
 	/* Must always set this bit to enable ints! */
@@ -1296,7 +1290,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 
 	/* decrement the number of credits we have by the number we just sent */
 	edge_port->txCredits -= count;
-	edge_port->icount.tx += count;
+	edge_port->port->icount.tx += count;
 
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
@@ -1308,7 +1302,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 
 		/* revert the credits as something bad happened. */
 		edge_port->txCredits += count;
-		edge_port->icount.tx -= count;
+		edge_port->port->icount.tx -= count;
 	}
 	dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n",
 		__func__, count, edge_port->txCredits, fifo->count);
@@ -1570,31 +1564,6 @@ static int edge_tiocmget(struct tty_struct *tty)
 	return result;
 }
 
-static int edge_get_icount(struct tty_struct *tty,
-				struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct async_icount cnow;
-	cnow = edge_port->icount;
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-
-	dev_dbg(&port->dev, "%s (%d) TIOCGICOUNT RX=%d, TX=%d\n", __func__,
-		port->number, icount->rx, icount->tx);
-	return 0;
-}
-
 static int get_serial_info(struct edgeport_port *edge_port,
 				struct serial_struct __user *retinfo)
 {
@@ -1631,8 +1600,6 @@ static int edge_ioctl(struct tty_struct *tty,
 	struct usb_serial_port *port = tty->driver_data;
 	DEFINE_WAIT(wait);
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct async_icount cnow;
-	struct async_icount cprev;
 
 	dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
 
@@ -1644,37 +1611,6 @@ static int edge_ioctl(struct tty_struct *tty,
 	case TIOCGSERIAL:
 		dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__,  port->number);
 		return get_serial_info(edge_port, (struct serial_struct __user *) arg);
-
-	case TIOCMIWAIT:
-		dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,  port->number);
-		cprev = edge_port->icount;
-		while (1) {
-			prepare_to_wait(&port->delta_msr_wait,
-						&wait, TASK_INTERRUPTIBLE);
-			schedule();
-			finish_wait(&port->delta_msr_wait, &wait);
-			/* see if a signal did it */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-
-			if (port->serial->disconnected)
-				return -EIO;
-
-			cnow = edge_port->icount;
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO; /* no change => error */
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
-				return 0;
-			}
-			cprev = cnow;
-		}
-		/* NOTREACHED */
-		break;
-
 	}
 	return -ENOIOCTLCMD;
 }
@@ -1848,7 +1784,7 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
 						edge_serial->rxPort);
 					edge_tty_recv(edge_port->port, buffer,
 							rxLen);
-					edge_port->icount.rx += rxLen;
+					edge_port->port->icount.rx += rxLen;
 				}
 				buffer += rxLen;
 			}
@@ -2024,7 +1960,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
 
 	if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
 			EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
-		icount = &edge_port->icount;
+		icount = &edge_port->port->icount;
 
 		/* update input line counters */
 		if (newMsr & EDGEPORT_MSR_DELTA_CTS)
@@ -2035,7 +1971,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
 			icount->dcd++;
 		if (newMsr & EDGEPORT_MSR_DELTA_RI)
 			icount->rng++;
-		wake_up_interruptible(&edge_port->port->delta_msr_wait);
+		wake_up_interruptible(&edge_port->port->port.delta_msr_wait);
 	}
 
 	/* Save the new modem status */
@@ -2070,7 +2006,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
 		edge_tty_recv(edge_port->port, &data, 1);
 
 	/* update input line counters */
-	icount = &edge_port->icount;
+	icount = &edge_port->port->icount;
 	if (newLsr & LSR_BREAK)
 		icount->brk++;
 	if (newLsr & LSR_OVER_ERR)
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 1511dd0..ae5fac5 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -116,7 +116,8 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
-	.get_icount		= edge_get_icount,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
@@ -147,7 +148,8 @@ static struct usb_serial_driver edgeport_4port_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
-	.get_icount		= edge_get_icount,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
@@ -178,7 +180,8 @@ static struct usb_serial_driver edgeport_8port_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
-	.get_icount		= edge_get_icount,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
@@ -209,7 +212,8 @@ static struct usb_serial_driver epic_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
-	.get_icount		= edge_get_icount,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 7777172..158bf4b 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -86,7 +86,7 @@ struct edgeport_port {
 	int baud_rate;
 	int close_pending;
 	int lsr_event;
-	struct async_icount	icount;
+
 	struct edgeport_serial	*edge_serial;
 	struct usb_serial_port	*port;
 	__u8 bUartMode;		/* Port type, 0: RS232, etc. */
@@ -206,7 +206,7 @@ static int restart_read(struct edgeport_port *edge_port);
 
 static void edge_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
-static void edge_send(struct tty_struct *tty);
+static void edge_send(struct usb_serial_port *port, struct tty_struct *tty);
 
 /* sysfs attributes */
 static int edge_create_sysfs_attrs(struct usb_serial_port *port);
@@ -1445,7 +1445,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 
 	if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
 			EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
-		icount = &edge_port->icount;
+		icount = &edge_port->port->icount;
 
 		/* update input line counters */
 		if (msr & EDGEPORT_MSR_DELTA_CTS)
@@ -1456,7 +1456,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 			icount->dcd++;
 		if (msr & EDGEPORT_MSR_DELTA_RI)
 			icount->rng++;
-		wake_up_interruptible(&edge_port->port->delta_msr_wait);
+		wake_up_interruptible(&edge_port->port->port.delta_msr_wait);
 	}
 
 	/* Save the new modem status */
@@ -1498,7 +1498,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
 		edge_tty_recv(edge_port->port, &data, 1);
 
 	/* update input line counters */
-	icount = &edge_port->icount;
+	icount = &edge_port->port->icount;
 	if (new_lsr & LSR_BREAK)
 		icount->brk++;
 	if (new_lsr & LSR_OVER_ERR)
@@ -1657,7 +1657,7 @@ static void edge_bulk_in_callback(struct urb *urb)
 		else
 			edge_tty_recv(edge_port->port, data,
 					urb->actual_length);
-		edge_port->icount.rx += urb->actual_length;
+		edge_port->port->icount.rx += urb->actual_length;
 	}
 
 exit:
@@ -1712,7 +1712,7 @@ static void edge_bulk_out_callback(struct urb *urb)
 
 	/* send any buffered data */
 	tty = tty_port_tty_get(&port->port);
-	edge_send(tty);
+	edge_send(port, tty);
 	tty_kref_put(tty);
 }
 
@@ -1750,8 +1750,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	dev = port->serial->dev;
 
-	memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
-
 	/* turn off loopback */
 	status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
 	if (status) {
@@ -1909,21 +1907,10 @@ static void edge_close(struct usb_serial_port *port)
 	kfifo_reset_out(&edge_port->write_fifo);
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
-	/* assuming we can still talk to the device,
-	 * send a close port command to it */
 	dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__);
 	port_number = port->number - port->serial->minor;
-
-	mutex_lock(&serial->disc_mutex);
-	if (!serial->disconnected) {
-		send_cmd(serial->dev,
-				     UMPC_CLOSE_PORT,
-				     (__u8)(UMPM_UART1_PORT + port_number),
-				     0,
-				     NULL,
-				     0);
-	}
-	mutex_unlock(&serial->disc_mutex);
+	send_cmd(serial->dev, UMPC_CLOSE_PORT,
+		     (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0);
 
 	mutex_lock(&edge_serial->es_lock);
 	--edge_port->edge_serial->num_ports_open;
@@ -1953,14 +1940,13 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	count = kfifo_in_locked(&edge_port->write_fifo, data, count,
 							&edge_port->ep_lock);
-	edge_send(tty);
+	edge_send(port, tty);
 
 	return count;
 }
 
-static void edge_send(struct tty_struct *tty)
+static void edge_send(struct usb_serial_port *port, struct tty_struct *tty)
 {
-	struct usb_serial_port *port = tty->driver_data;
 	int count, result;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -1999,7 +1985,7 @@ static void edge_send(struct tty_struct *tty)
 		edge_port->ep_write_urb_in_use = 0;
 		/* TODO: reschedule edge_send */
 	} else
-		edge_port->icount.tx += count;
+		edge_port->port->icount.tx += count;
 
 	/* wakeup any process waiting for writes to complete */
 	/* there is now more room in the buffer for new writes */
@@ -2360,27 +2346,6 @@ static int edge_tiocmget(struct tty_struct *tty)
 	return result;
 }
 
-static int edge_get_icount(struct tty_struct *tty,
-				struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct async_icount *ic = &edge_port->icount;
-
-	icount->cts = ic->cts;
-	icount->dsr = ic->dsr;
-	icount->rng = ic->rng;
-	icount->dcd = ic->dcd;
-	icount->tx = ic->tx;
-        icount->rx = ic->rx;
-        icount->frame = ic->frame;
-        icount->parity = ic->parity;
-        icount->overrun = ic->overrun;
-        icount->brk = ic->brk;
-        icount->buf_overrun = ic->buf_overrun;
-	return 0;
-}
-
 static int get_serial_info(struct edgeport_port *edge_port,
 				struct serial_struct __user *retinfo)
 {
@@ -2392,7 +2357,7 @@ static int get_serial_info(struct edgeport_port *edge_port,
 
 	cwait = edge_port->port->port.closing_wait;
 	if (cwait != ASYNC_CLOSING_WAIT_NONE)
-		cwait = jiffies_to_msecs(closing_wait) / 10;
+		cwait = jiffies_to_msecs(cwait) / 10;
 
 	memset(&tmp, 0, sizeof(tmp));
 
@@ -2416,8 +2381,6 @@ static int edge_ioctl(struct tty_struct *tty,
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct async_icount cnow;
-	struct async_icount cprev;
 
 	dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
 
@@ -2426,32 +2389,6 @@ static int edge_ioctl(struct tty_struct *tty,
 		dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__);
 		return get_serial_info(edge_port,
 				(struct serial_struct __user *) arg);
-	case TIOCMIWAIT:
-		dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__);
-		cprev = edge_port->icount;
-		while (1) {
-			interruptible_sleep_on(&port->delta_msr_wait);
-			/* see if a signal did it */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-
-			if (port->serial->disconnected)
-				return -EIO;
-
-			cnow = edge_port->icount;
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO; /* no change => error */
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
-				return 0;
-			}
-			cprev = cnow;
-		}
-		/* not reached */
-		break;
 	}
 	return -ENOIOCTLCMD;
 }
@@ -2463,8 +2400,6 @@ static void edge_break(struct tty_struct *tty, int break_state)
 	int status;
 	int bv = 0;	/* Off */
 
-	tty_wait_until_sent(tty, 0);
-
 	if (break_state == -1)
 		bv = 1;	/* On */
 	status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv);
@@ -2546,7 +2481,6 @@ static int edge_port_remove(struct usb_serial_port *port)
 	struct edgeport_port *edge_port;
 
 	edge_port = usb_get_serial_port_data(port);
-
 	edge_remove_sysfs_attrs(port);
 	kfifo_free(&edge_port->write_fifo);
 	kfree(edge_port);
@@ -2618,7 +2552,8 @@ static struct usb_serial_driver edgeport_1port_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
-	.get_icount		= edge_get_icount,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
@@ -2649,7 +2584,8 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
-	.get_icount		= edge_get_icount,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index ff77027..9d74c27 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -55,7 +55,6 @@ static void read_rxcmd_callback(struct urb *urb);
 
 struct iuu_private {
 	spinlock_t lock;	/* store irq state */
-	wait_queue_head_t delta_msr_wait;
 	u8 line_status;
 	int tiostatus;		/* store IUART SIGNAL for tiocmget call */
 	u8 reset;		/* if 1 reset is needed */
@@ -94,7 +93,6 @@ static int iuu_port_probe(struct usb_serial_port *port)
 
 	priv->vcc = vcc_default;
 	spin_lock_init(&priv->lock);
-	init_waitqueue_head(&priv->delta_msr_wait);
 
 	usb_set_serial_port_data(port, priv);
 
@@ -944,22 +942,13 @@ static void iuu_set_termios(struct tty_struct *tty,
 static void iuu_close(struct usb_serial_port *port)
 {
 	/* iuu_led (port,255,0,0,0); */
-	struct usb_serial *serial;
-
-	serial = port->serial;
-	if (!serial)
-		return;
 
 	iuu_uart_off(port);
-	if (serial->dev) {
-		/* free writebuf */
-		/* shutdown our urbs */
-		dev_dbg(&port->dev, "%s - shutting down urbs\n", __func__);
-		usb_kill_urb(port->write_urb);
-		usb_kill_urb(port->read_urb);
-		usb_kill_urb(port->interrupt_in_urb);
-		iuu_led(port, 0, 0, 0xF000, 0xFF);
-	}
+
+	usb_kill_urb(port->write_urb);
+	usb_kill_urb(port->read_urb);
+
+	iuu_led(port, 0, 0, 0xF000, 0xFF);
 }
 
 static void iuu_init_termios(struct tty_struct *tty)
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index b011478..eb30d7b 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -712,45 +712,45 @@ static void usa49wg_indat_callback(struct urb *urb)
 	i = 0;
 	len = 0;
 
-	if (urb->actual_length) {
-		while (i < urb->actual_length) {
+	while (i < urb->actual_length) {
 
-			/* Check port number from message*/
-			if (data[i] >= serial->num_ports) {
-				dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
-					__func__, data[i]);
-				return;
-			}
-			port = serial->port[data[i++]];
-			len = data[i++];
+		/* Check port number from message */
+		if (data[i] >= serial->num_ports) {
+			dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
+				__func__, data[i]);
+			return;
+		}
+		port = serial->port[data[i++]];
+		len = data[i++];
 
-			/* 0x80 bit is error flag */
-			if ((data[i] & 0x80) == 0) {
-				/* no error on any byte */
-				i++;
-				for (x = 1; x < len ; ++x)
-					tty_insert_flip_char(&port->port,
-							data[i++], 0);
-			} else {
-				/*
-				 * some bytes had errors, every byte has status
-				 */
-				for (x = 0; x + 1 < len; x += 2) {
-					int stat = data[i], flag = 0;
-					if (stat & RXERROR_OVERRUN)
-						flag |= TTY_OVERRUN;
-					if (stat & RXERROR_FRAMING)
-						flag |= TTY_FRAME;
-					if (stat & RXERROR_PARITY)
-						flag |= TTY_PARITY;
-					/* XXX should handle break (0x10) */
-					tty_insert_flip_char(&port->port,
-							data[i+1], flag);
-					i += 2;
-				}
+		/* 0x80 bit is error flag */
+		if ((data[i] & 0x80) == 0) {
+			/* no error on any byte */
+			i++;
+			for (x = 1; x < len && i < urb->actual_length; ++x)
+				tty_insert_flip_char(&port->port,
+						data[i++], 0);
+		} else {
+			/*
+			 * some bytes had errors, every byte has status
+			 */
+			for (x = 0; x + 1 < len &&
+				    i + 1 < urb->actual_length; x += 2) {
+				int stat = data[i], flag = 0;
+
+				if (stat & RXERROR_OVERRUN)
+					flag |= TTY_OVERRUN;
+				if (stat & RXERROR_FRAMING)
+					flag |= TTY_FRAME;
+				if (stat & RXERROR_PARITY)
+					flag |= TTY_PARITY;
+				/* XXX should handle break (0x10) */
+				tty_insert_flip_char(&port->port, data[i+1],
+						     flag);
+				i += 2;
 			}
-			tty_flip_buffer_push(&port->port);
 		}
+		tty_flip_buffer_push(&port->port);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -1092,7 +1092,6 @@ static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
 static void keyspan_close(struct usb_serial_port *port)
 {
 	int			i;
-	struct usb_serial	*serial = port->serial;
 	struct keyspan_port_private 	*p_priv;
 
 	p_priv = usb_get_serial_port_data(port);
@@ -1100,28 +1099,17 @@ static void keyspan_close(struct usb_serial_port *port)
 	p_priv->rts_state = 0;
 	p_priv->dtr_state = 0;
 
-	if (serial->dev) {
-		keyspan_send_setup(port, 2);
-		/* pilot-xfer seems to work best with this delay */
-		mdelay(100);
-		/* keyspan_set_termios(port, NULL); */
-	}
-
-	/*while (p_priv->outcont_urb->status == -EINPROGRESS) {
-		dev_dbg(&port->dev, "%s - urb in progress\n", __func__);
-	}*/
+	keyspan_send_setup(port, 2);
+	/* pilot-xfer seems to work best with this delay */
+	mdelay(100);
 
 	p_priv->out_flip = 0;
 	p_priv->in_flip = 0;
 
-	if (serial->dev) {
-		/* Stop reading/writing urbs */
-		stop_urb(p_priv->inack_urb);
-		/* stop_urb(p_priv->outcont_urb); */
-		for (i = 0; i < 2; i++) {
-			stop_urb(p_priv->in_urbs[i]);
-			stop_urb(p_priv->out_urbs[i]);
-		}
+	stop_urb(p_priv->inack_urb);
+	for (i = 0; i < 2; i++) {
+		stop_urb(p_priv->in_urbs[i]);
+		stop_urb(p_priv->out_urbs[i]);
 	}
 }
 
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 2230223..5f1d382e 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -593,12 +593,10 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct usb_serial *serial = port->serial;
 
-	if (serial->dev) {
-		if (on)
-			keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2));
-		else
-			keyspan_pda_set_modem_info(serial, 0);
-	}
+	if (on)
+		keyspan_pda_set_modem_info(serial, (1 << 7) | (1 << 2));
+	else
+		keyspan_pda_set_modem_info(serial, 0);
 }
 
 
@@ -649,13 +647,8 @@ error:
 }
 static void keyspan_pda_close(struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
-
-	if (serial->dev) {
-		/* shutdown our bulk reads and writes */
-		usb_kill_urb(port->write_urb);
-		usb_kill_urb(port->interrupt_in_urb);
-	}
+	usb_kill_urb(port->write_urb);
+	usb_kill_urb(port->interrupt_in_urb);
 }
 
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 769d910..1b4054f 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -341,28 +341,20 @@ static void klsi_105_close(struct usb_serial_port *port)
 {
 	int rc;
 
-	mutex_lock(&port->serial->disc_mutex);
-	if (!port->serial->disconnected) {
-		/* send READ_OFF */
-		rc = usb_control_msg(port->serial->dev,
-				     usb_sndctrlpipe(port->serial->dev, 0),
-				     KL5KUSB105A_SIO_CONFIGURE,
-				     USB_TYPE_VENDOR | USB_DIR_OUT,
-				     KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
-				     0, /* index */
-				     NULL, 0,
-				     KLSI_TIMEOUT);
-		if (rc < 0)
-			dev_err(&port->dev,
-				"Disabling read failed (error = %d)\n", rc);
-	}
-	mutex_unlock(&port->serial->disc_mutex);
+	/* send READ_OFF */
+	rc = usb_control_msg(port->serial->dev,
+			     usb_sndctrlpipe(port->serial->dev, 0),
+			     KL5KUSB105A_SIO_CONFIGURE,
+			     USB_TYPE_VENDOR | USB_DIR_OUT,
+			     KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+			     0, /* index */
+			     NULL, 0,
+			     KLSI_TIMEOUT);
+	if (rc < 0)
+		dev_err(&port->dev, "failed to disable read: %d\n", rc);
 
 	/* shutdown our bulk reads and writes */
 	usb_serial_generic_close(port);
-
-	/* wgg - do I need this? I think so. */
-	usb_kill_urb(port->interrupt_in_urb);
 }
 
 /* We need to write a complete 64-byte data block and encode the
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 903d938..78b48c3 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -65,7 +65,7 @@ static int  kobil_tiocmget(struct tty_struct *tty);
 static int  kobil_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear);
 static void kobil_read_int_callback(struct urb *urb);
-static void kobil_write_callback(struct urb *purb);
+static void kobil_write_int_callback(struct urb *urb);
 static void kobil_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static void kobil_init_termios(struct tty_struct *tty);
@@ -99,6 +99,7 @@ static struct usb_serial_driver kobil_device = {
 	.write =		kobil_write,
 	.write_room =		kobil_write_room,
 	.read_int_callback =	kobil_read_int_callback,
+	.write_int_callback =	kobil_write_int_callback,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -106,8 +107,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
 };
 
 struct kobil_private {
-	int write_int_endpoint_address;
-	int read_int_endpoint_address;
 	unsigned char buf[KOBIL_BUF_LENGTH]; /* buffer for the APDU to send */
 	int filled;  /* index of the last char in buf */
 	int cur_pos; /* index of the next char to send in buf */
@@ -117,14 +116,8 @@ struct kobil_private {
 
 static int kobil_port_probe(struct usb_serial_port *port)
 {
-	int i;
 	struct usb_serial *serial = port->serial;
 	struct kobil_private *priv;
-	struct usb_device *pdev;
-	struct usb_host_config *actconfig;
-	struct usb_interface *interface;
-	struct usb_host_interface *altsetting;
-	struct usb_host_endpoint *endpoint;
 
 	priv = kmalloc(sizeof(struct kobil_private), GFP_KERNEL);
 	if (!priv)
@@ -150,30 +143,6 @@ static int kobil_port_probe(struct usb_serial_port *port)
 	}
 	usb_set_serial_port_data(port, priv);
 
-	/* search for the necessary endpoints */
-	pdev = serial->dev;
-	actconfig = pdev->actconfig;
-	interface = actconfig->interface[0];
-	altsetting = interface->cur_altsetting;
-	endpoint = altsetting->endpoint;
-
-	for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
-		endpoint = &altsetting->endpoint[i];
-		if (usb_endpoint_is_int_out(&endpoint->desc)) {
-			dev_dbg(&serial->dev->dev,
-				"%s Found interrupt out endpoint. Address: %d\n",
-				__func__, endpoint->desc.bEndpointAddress);
-			priv->write_int_endpoint_address =
-				endpoint->desc.bEndpointAddress;
-		}
-		if (usb_endpoint_is_int_in(&endpoint->desc)) {
-			dev_dbg(&serial->dev->dev,
-				"%s Found interrupt in  endpoint. Address: %d\n",
-				__func__, endpoint->desc.bEndpointAddress);
-			priv->read_int_endpoint_address =
-				endpoint->desc.bEndpointAddress;
-		}
-	}
 	return 0;
 }
 
@@ -205,7 +174,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct kobil_private *priv;
 	unsigned char *transfer_buffer;
 	int transfer_buffer_length = 8;
-	int write_urb_transfer_buffer_length = 8;
 
 	priv = usb_get_serial_port_data(port);
 
@@ -214,27 +182,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (!transfer_buffer)
 		return -ENOMEM;
 
-	/* allocate write_urb */
-	if (!port->write_urb) {
-		dev_dbg(dev, "%s - Allocating port->write_urb\n", __func__);
-		port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!port->write_urb) {
-			dev_dbg(dev, "%s - usb_alloc_urb failed\n", __func__);
-			kfree(transfer_buffer);
-			return -ENOMEM;
-		}
-	}
-
-	/* allocate memory for write_urb transfer buffer */
-	port->write_urb->transfer_buffer =
-			kmalloc(write_urb_transfer_buffer_length, GFP_KERNEL);
-	if (!port->write_urb->transfer_buffer) {
-		kfree(transfer_buffer);
-		usb_free_urb(port->write_urb);
-		port->write_urb = NULL;
-		return -ENOMEM;
-	}
-
 	/* get hardware version */
 	result = usb_control_msg(port->serial->dev,
 			  usb_rcvctrlpipe(port->serial->dev, 0),
@@ -310,12 +257,7 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 static void kobil_close(struct usb_serial_port *port)
 {
 	/* FIXME: Add rts/dtr methods */
-	if (port->write_urb) {
-		usb_poison_urb(port->write_urb);
-		kfree(port->write_urb->transfer_buffer);
-		usb_free_urb(port->write_urb);
-		port->write_urb = NULL;
-	}
+	usb_kill_urb(port->interrupt_out_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
@@ -333,24 +275,8 @@ static void kobil_read_int_callback(struct urb *urb)
 	}
 
 	if (urb->actual_length) {
-
-		/* BEGIN DEBUG */
-		/*
-		  char *dbg_data;
-
-		  dbg_data = kzalloc((3 *  purb->actual_length + 10)
-						* sizeof(char), GFP_KERNEL);
-		  if (! dbg_data) {
-			  return;
-		  }
-		  for (i = 0; i < purb->actual_length; i++) {
-			  sprintf(dbg_data +3*i, "%02X ", data[i]);
-		  }
-		  dev_dbg(&port->dev, " <-- %s\n", dbg_data);
-		  kfree(dbg_data);
-		*/
-		/* END DEBUG */
-
+		usb_serial_debug_data(&port->dev, __func__, urb->actual_length,
+									data);
 		tty_insert_flip_string(&port->port, data, urb->actual_length);
 		tty_flip_buffer_push(&port->port);
 	}
@@ -360,7 +286,7 @@ static void kobil_read_int_callback(struct urb *urb)
 }
 
 
-static void kobil_write_callback(struct urb *purb)
+static void kobil_write_int_callback(struct urb *urb)
 {
 }
 
@@ -403,23 +329,14 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 		while (todo > 0) {
 			/* max 8 byte in one urb (endpoint size) */
-			length = (todo < 8) ? todo : 8;
+			length = min(todo, port->interrupt_out_size);
 			/* copy data to transfer buffer */
-			memcpy(port->write_urb->transfer_buffer,
+			memcpy(port->interrupt_out_buffer,
 					priv->buf + priv->cur_pos, length);
-			usb_fill_int_urb(port->write_urb,
-				  port->serial->dev,
-				  usb_sndintpipe(port->serial->dev,
-					priv->write_int_endpoint_address),
-				  port->write_urb->transfer_buffer,
-				  length,
-				  kobil_write_callback,
-				  port,
-				  8
-			);
+			port->interrupt_out_urb->transfer_buffer_length = length;
 
 			priv->cur_pos = priv->cur_pos + length;
-			result = usb_submit_urb(port->write_urb, GFP_NOIO);
+			result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO);
 			dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result);
 			todo = priv->filled - priv->cur_pos;
 
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 06d5a60..6a15adf 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -35,7 +35,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
-#include <linux/ioctl.h>
 #include "mct_u232.h"
 
 #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>"
@@ -44,7 +43,6 @@
 /*
  * Function prototypes
  */
-static int  mct_u232_startup(struct usb_serial *serial);
 static int  mct_u232_port_probe(struct usb_serial_port *port);
 static int  mct_u232_port_remove(struct usb_serial_port *remove);
 static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
@@ -57,10 +55,6 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
 static int  mct_u232_tiocmget(struct tty_struct *tty);
 static int  mct_u232_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
-static int  mct_u232_ioctl(struct tty_struct *tty,
-			unsigned int cmd, unsigned long arg);
-static int  mct_u232_get_icount(struct tty_struct *tty,
-			struct serial_icounter_struct *icount);
 static void mct_u232_throttle(struct tty_struct *tty);
 static void mct_u232_unthrottle(struct tty_struct *tty);
 
@@ -95,11 +89,10 @@ static struct usb_serial_driver mct_u232_device = {
 	.break_ctl =	     mct_u232_break_ctl,
 	.tiocmget =	     mct_u232_tiocmget,
 	.tiocmset =	     mct_u232_tiocmset,
-	.attach =	     mct_u232_startup,
+	.tiocmiwait =        usb_serial_generic_tiocmiwait,
 	.port_probe =        mct_u232_port_probe,
 	.port_remove =       mct_u232_port_remove,
-	.ioctl =             mct_u232_ioctl,
-	.get_icount =        mct_u232_get_icount,
+	.get_icount =        usb_serial_generic_get_icount,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -107,13 +100,13 @@ static struct usb_serial_driver * const serial_drivers[] = {
 };
 
 struct mct_u232_private {
+	struct urb *read_urb;
 	spinlock_t lock;
 	unsigned int	     control_state; /* Modem Line Setting (TIOCM) */
 	unsigned char        last_lcr;      /* Line Control Register */
 	unsigned char	     last_lsr;      /* Line Status Register */
 	unsigned char	     last_msr;      /* Modem Status Register */
 	unsigned int	     rx_flags;      /* Throttling flags */
-	struct async_icount  icount;
 };
 
 #define THROTTLED		0x01
@@ -382,22 +375,6 @@ static void mct_u232_msr_to_state(struct usb_serial_port *port,
  * Driver's tty interface functions
  */
 
-static int mct_u232_startup(struct usb_serial *serial)
-{
-	struct usb_serial_port *port, *rport;
-
-	/* Puh, that's dirty */
-	port = serial->port[0];
-	rport = serial->port[1];
-	/* No unlinking, it wasn't submitted yet. */
-	usb_free_urb(port->read_urb);
-	port->read_urb = rport->interrupt_in_urb;
-	rport->interrupt_in_urb = NULL;
-	port->read_urb->context = port;
-
-	return 0;
-} /* mct_u232_startup */
-
 static int mct_u232_port_probe(struct usb_serial_port *port)
 {
 	struct mct_u232_private *priv;
@@ -406,6 +383,10 @@ static int mct_u232_port_probe(struct usb_serial_port *port)
 	if (!priv)
 		return -ENOMEM;
 
+	/* Use second interrupt-in endpoint for reading. */
+	priv->read_urb = port->serial->port[1]->interrupt_in_urb;
+	priv->read_urb->context = port;
+
 	spin_lock_init(&priv->lock);
 
 	usb_set_serial_port_data(port, priv);
@@ -469,17 +450,17 @@ static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
 	mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
+	retval = usb_submit_urb(priv->read_urb, GFP_KERNEL);
 	if (retval) {
 		dev_err(&port->dev,
-			"usb_submit_urb(read bulk) failed pipe 0x%x err %d\n",
+			"usb_submit_urb(read) failed pipe 0x%x err %d\n",
 			port->read_urb->pipe, retval);
 		goto error;
 	}
 
 	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (retval) {
-		usb_kill_urb(port->read_urb);
+		usb_kill_urb(priv->read_urb);
 		dev_err(&port->dev,
 			"usb_submit_urb(read int) failed pipe 0x%x err %d",
 			port->interrupt_in_urb->pipe, retval);
@@ -509,11 +490,9 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
 
 static void mct_u232_close(struct usb_serial_port *port)
 {
-	/*
-	 * Must kill the read urb as it is actually an interrupt urb, which
-	 * generic close thus fails to kill.
-	 */
-	usb_kill_urb(port->read_urb);
+	struct mct_u232_private *priv = usb_get_serial_port_data(port);
+
+	usb_kill_urb(priv->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 
 	usb_serial_generic_close(port);
@@ -570,7 +549,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
 	/* Record Control Line states */
 	mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr);
 
-	mct_u232_msr_to_icount(&priv->icount, priv->last_msr);
+	mct_u232_msr_to_icount(&port->icount, priv->last_msr);
 
 #if 0
 	/* Not yet handled. See belkin_sa.c for further information */
@@ -598,7 +577,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
 		tty_kref_put(tty);
 	}
 #endif
-	wake_up_interruptible(&port->delta_msr_wait);
+	wake_up_interruptible(&port->port.delta_msr_wait);
 	spin_unlock_irqrestore(&priv->lock, flags);
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -786,86 +765,6 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
 	}
 }
 
-static int  mct_u232_ioctl(struct tty_struct *tty,
-			unsigned int cmd, unsigned long arg)
-{
-	DEFINE_WAIT(wait);
-	struct usb_serial_port *port = tty->driver_data;
-	struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port);
-	struct async_icount cnow, cprev;
-	unsigned long flags;
-
-	dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd);
-
-	switch (cmd) {
-
-	case TIOCMIWAIT:
-
-		dev_dbg(&port->dev, "%s TIOCMIWAIT", __func__);
-
-		spin_lock_irqsave(&mct_u232_port->lock, flags);
-		cprev = mct_u232_port->icount;
-		spin_unlock_irqrestore(&mct_u232_port->lock, flags);
-		for ( ; ; ) {
-			prepare_to_wait(&port->delta_msr_wait,
-					&wait, TASK_INTERRUPTIBLE);
-			schedule();
-			finish_wait(&port->delta_msr_wait, &wait);
-			/* see if a signal did it */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-
-			if (port->serial->disconnected)
-				return -EIO;
-
-			spin_lock_irqsave(&mct_u232_port->lock, flags);
-			cnow = mct_u232_port->icount;
-			spin_unlock_irqrestore(&mct_u232_port->lock, flags);
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO; /* no change => error */
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
-				return 0;
-			}
-			cprev = cnow;
-		}
-
-	}
-	return -ENOIOCTLCMD;
-}
-
-static int  mct_u232_get_icount(struct tty_struct *tty,
-			struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port);
-	struct async_icount *ic = &mct_u232_port->icount;
-	unsigned long flags;
-
-	spin_lock_irqsave(&mct_u232_port->lock, flags);
-
-	icount->cts = ic->cts;
-	icount->dsr = ic->dsr;
-	icount->rng = ic->rng;
-	icount->dcd = ic->dcd;
-	icount->rx = ic->rx;
-	icount->tx = ic->tx;
-	icount->frame = ic->frame;
-	icount->overrun = ic->overrun;
-	icount->parity = ic->parity;
-	icount->brk = ic->brk;
-	icount->buf_overrun = ic->buf_overrun;
-
-	spin_unlock_irqrestore(&mct_u232_port->lock, flags);
-
-	dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n",
-		__func__,  icount->rx, icount->tx);
-	return 0;
-}
-
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index bf3c7a2..47e2477 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -177,10 +177,7 @@ static void metrousb_cleanup(struct usb_serial_port *port)
 	usb_unlink_urb(port->interrupt_in_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 
-	mutex_lock(&port->serial->disc_mutex);
-	if (!port->serial->disconnected)
-		metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
-	mutex_unlock(&port->serial->disc_mutex);
+	metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
 }
 
 static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index e956eae..cc0e543 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -62,7 +62,6 @@ struct moschip_port {
 	__u8	shadowMCR;		/* last MCR value received */
 	__u8	shadowMSR;		/* last MSR value received */
 	char			open;
-	struct async_icount	icount;
 	struct usb_serial_port	*port;	/* loop back to the owner */
 	struct urb		*write_urb_pool[NUM_URBS];
 };
@@ -1071,9 +1070,6 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 		dev_err(&port->dev, "%s - Error %d submitting read urb\n",
 							__func__, response);
 
-	/* initialize our icount structure */
-	memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount));
-
 	/* initialize our port settings */
 	mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */
 
@@ -1140,16 +1136,9 @@ static void mos7720_close(struct usb_serial_port *port)
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 
-	mutex_lock(&serial->disc_mutex);
-	/* these commands must not be issued if the device has
-	 * been disconnected */
-	if (!serial->disconnected) {
-		write_mos_reg(serial, port->number - port->serial->minor,
-			      MCR, 0x00);
-		write_mos_reg(serial, port->number - port->serial->minor,
-			      IER, 0x00);
-	}
-	mutex_unlock(&serial->disc_mutex);
+	write_mos_reg(serial, port->number - port->serial->minor, MCR, 0x00);
+	write_mos_reg(serial, port->number - port->serial->minor, IER, 0x00);
+
 	mos7720_port->open = 0;
 }
 
@@ -1799,33 +1788,6 @@ static int mos7720_tiocmset(struct tty_struct *tty,
 	return 0;
 }
 
-static int mos7720_get_icount(struct tty_struct *tty,
-				struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct moschip_port *mos7720_port;
-	struct async_icount cnow;
-
-	mos7720_port = usb_get_serial_port_data(port);
-	cnow = mos7720_port->icount;
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-
-	dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__,
-		icount->rx, icount->tx);
-	return 0;
-}
-
 static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 			  unsigned int __user *value)
 {
@@ -1901,8 +1863,6 @@ static int mos7720_ioctl(struct tty_struct *tty,
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port;
-	struct async_icount cnow;
-	struct async_icount cprev;
 
 	mos7720_port = usb_get_serial_port_data(port);
 	if (mos7720_port == NULL)
@@ -1927,27 +1887,6 @@ static int mos7720_ioctl(struct tty_struct *tty,
 		dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__);
 		return get_serial_info(mos7720_port,
 				       (struct serial_struct __user *)arg);
-
-	case TIOCMIWAIT:
-		dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__);
-		cprev = mos7720_port->icount;
-		while (1) {
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-			cnow = mos7720_port->icount;
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO; /* no change => error */
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
-				return 0;
-			}
-			cprev = cnow;
-		}
-		/* NOTREACHED */
-		break;
 	}
 
 	return -ENOIOCTLCMD;
@@ -2103,7 +2042,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.ioctl			= mos7720_ioctl,
 	.tiocmget		= mos7720_tiocmget,
 	.tiocmset		= mos7720_tiocmset,
-	.get_icount		= mos7720_get_icount,
 	.set_termios		= mos7720_set_termios,
 	.write			= mos7720_write,
 	.write_room		= mos7720_write_room,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2be376a..a0d5ea5 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -219,8 +219,6 @@ struct moschip_port {
 	char open;
 	char open_ports;
 	wait_queue_head_t wait_chase;	/* for handling sleeping while waiting for chase to finish */
-	int delta_msr_cond;
-	struct async_icount icount;
 	struct usb_serial_port *port;	/* loop back to the owner of this object */
 
 	/* Offsets */
@@ -399,32 +397,22 @@ static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
 	struct moschip_port *mos7840_port;
 	struct async_icount *icount;
 	mos7840_port = port;
-	icount = &mos7840_port->icount;
 	if (new_msr &
 	    (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI |
 	     MOS_MSR_DELTA_CD)) {
-		icount = &mos7840_port->icount;
+		icount = &mos7840_port->port->icount;
 
 		/* update input line counters */
-		if (new_msr & MOS_MSR_DELTA_CTS) {
+		if (new_msr & MOS_MSR_DELTA_CTS)
 			icount->cts++;
-			smp_wmb();
-		}
-		if (new_msr & MOS_MSR_DELTA_DSR) {
+		if (new_msr & MOS_MSR_DELTA_DSR)
 			icount->dsr++;
-			smp_wmb();
-		}
-		if (new_msr & MOS_MSR_DELTA_CD) {
+		if (new_msr & MOS_MSR_DELTA_CD)
 			icount->dcd++;
-			smp_wmb();
-		}
-		if (new_msr & MOS_MSR_DELTA_RI) {
+		if (new_msr & MOS_MSR_DELTA_RI)
 			icount->rng++;
-			smp_wmb();
-		}
 
-		mos7840_port->delta_msr_cond = 1;
-		wake_up_interruptible(&port->port->delta_msr_wait);
+		wake_up_interruptible(&port->port->port.delta_msr_wait);
 	}
 }
 
@@ -442,23 +430,15 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
 	}
 
 	/* update input line counters */
-	icount = &port->icount;
-	if (new_lsr & SERIAL_LSR_BI) {
+	icount = &port->port->icount;
+	if (new_lsr & SERIAL_LSR_BI)
 		icount->brk++;
-		smp_wmb();
-	}
-	if (new_lsr & SERIAL_LSR_OE) {
+	if (new_lsr & SERIAL_LSR_OE)
 		icount->overrun++;
-		smp_wmb();
-	}
-	if (new_lsr & SERIAL_LSR_PE) {
+	if (new_lsr & SERIAL_LSR_PE)
 		icount->parity++;
-		smp_wmb();
-	}
-	if (new_lsr & SERIAL_LSR_FE) {
+	if (new_lsr & SERIAL_LSR_FE)
 		icount->frame++;
-		smp_wmb();
-	}
 }
 
 /************************************************************************/
@@ -777,9 +757,8 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 		struct tty_port *tport = &mos7840_port->port->port;
 		tty_insert_flip_string(tport, data, urb->actual_length);
 		tty_flip_buffer_push(tport);
-		mos7840_port->icount.rx += urb->actual_length;
-		smp_wmb();
-		dev_dbg(&port->dev, "mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx);
+		port->icount.rx += urb->actual_length;
+		dev_dbg(&port->dev, "icount.rx is %d:\n", port->icount.rx);
 	}
 
 	if (!mos7840_port->read_urb) {
@@ -1127,17 +1106,12 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	/* initialize our wait queues */
 	init_waitqueue_head(&mos7840_port->wait_chase);
 
-	/* initialize our icount structure */
-	memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount));
-
 	/* initialize our port settings */
 	/* Must set to enable ints! */
 	mos7840_port->shadowMCR = MCR_MASTER_IE;
 	/* send a open port command */
 	mos7840_port->open = 1;
 	/* mos7840_change_port_settings(mos7840_port,old_termios); */
-	mos7840_port->icount.tx = 0;
-	mos7840_port->icount.rx = 0;
 
 	return 0;
 }
@@ -1220,25 +1194,10 @@ static void mos7840_close(struct usb_serial_port *port)
 		}
 	}
 
-	/* While closing port, shutdown all bulk read, write  *
-	 * and interrupt read if they exists                  */
-	if (serial->dev) {
-		if (mos7840_port->write_urb) {
-			dev_dbg(&port->dev, "%s", "Shutdown bulk write\n");
-			usb_kill_urb(mos7840_port->write_urb);
-		}
-		if (mos7840_port->read_urb) {
-			dev_dbg(&port->dev, "%s", "Shutdown bulk read\n");
-			usb_kill_urb(mos7840_port->read_urb);
-			mos7840_port->read_urb_busy = false;
-		}
-		if ((&mos7840_port->control_urb)) {
-			dev_dbg(&port->dev, "%s", "Shutdown control read\n");
-			/*/      usb_kill_urb (mos7840_port->control_urb); */
-		}
-	}
-/*      if(mos7840_port->ctrl_buf != NULL) */
-/*              kfree(mos7840_port->ctrl_buf); */
+	usb_kill_urb(mos7840_port->write_urb);
+	usb_kill_urb(mos7840_port->read_urb);
+	mos7840_port->read_urb_busy = false;
+
 	port0->open_ports--;
 	dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number);
 	if (port0->open_ports == 0) {
@@ -1250,8 +1209,7 @@ static void mos7840_close(struct usb_serial_port *port)
 
 	if (mos7840_port->write_urb) {
 		/* if this urb had a transfer buffer already (old tx) free it */
-		if (mos7840_port->write_urb->transfer_buffer != NULL)
-			kfree(mos7840_port->write_urb->transfer_buffer);
+		kfree(mos7840_port->write_urb->transfer_buffer);
 		usb_free_urb(mos7840_port->write_urb);
 	}
 
@@ -1328,9 +1286,8 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
 	if (mos7840_port == NULL)
 		return;
 
-	if (serial->dev)
-		/* flush and block until tx is empty */
-		mos7840_block_until_chase_response(tty, mos7840_port);
+	/* flush and block until tx is empty */
+	mos7840_block_until_chase_response(tty, mos7840_port);
 
 	if (break_state == -1)
 		data = mos7840_port->shadowLCR | LCR_SET_BREAK;
@@ -1520,9 +1477,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 		goto exit;
 	}
 	bytes_sent = transfer_size;
-	mos7840_port->icount.tx += transfer_size;
-	smp_wmb();
-	dev_dbg(&port->dev, "mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
+	port->icount.tx += transfer_size;
+	dev_dbg(&port->dev, "icount.tx is %d:\n", port->icount.tx);
 exit:
 	return bytes_sent;
 
@@ -2141,34 +2097,6 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
 	return 0;
 }
 
-static int mos7840_get_icount(struct tty_struct *tty,
-			struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct moschip_port *mos7840_port;
-	struct async_icount cnow;
-
-	mos7840_port = mos7840_get_port_private(port);
-	cnow = mos7840_port->icount;
-
-	smp_rmb();
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-
-	dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__,
-		icount->rx, icount->tx);
-	return 0;
-}
-
 /*****************************************************************************
  * SerialIoctl
  *	this function handles any ioctl calls to the driver
@@ -2181,9 +2109,6 @@ static int mos7840_ioctl(struct tty_struct *tty,
 	void __user *argp = (void __user *)arg;
 	struct moschip_port *mos7840_port;
 
-	struct async_icount cnow;
-	struct async_icount cprev;
-
 	if (mos7840_port_paranoia_check(port, __func__))
 		return -1;
 
@@ -2208,41 +2133,6 @@ static int mos7840_ioctl(struct tty_struct *tty,
 	case TIOCSSERIAL:
 		dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__);
 		break;
-
-	case TIOCMIWAIT:
-		dev_dbg(&port->dev, "%s  TIOCMIWAIT\n", __func__);
-		cprev = mos7840_port->icount;
-		while (1) {
-			/* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */
-			mos7840_port->delta_msr_cond = 0;
-			wait_event_interruptible(port->delta_msr_wait,
-						 (port->serial->disconnected ||
-						  mos7840_port->
-						  delta_msr_cond == 1));
-
-			/* see if a signal did it */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-
-			if (port->serial->disconnected)
-				return -EIO;
-
-			cnow = mos7840_port->icount;
-			smp_rmb();
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO;	/* no change => error */
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
-				return 0;
-			}
-			cprev = cnow;
-		}
-		/* NOTREACHED */
-		break;
-
 	default:
 		break;
 	}
@@ -2589,7 +2479,8 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.break_ctl = mos7840_break,
 	.tiocmget = mos7840_tiocmget,
 	.tiocmset = mos7840_tiocmset,
-	.get_icount = mos7840_get_icount,
+	.tiocmiwait = usb_serial_generic_tiocmiwait,
+	.get_icount = usb_serial_generic_get_icount,
 	.port_probe = mos7840_port_probe,
 	.port_remove = mos7840_port_remove,
 	.read_bulk_callback = mos7840_bulk_in_callback,
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 1e1cafe..5739bf6 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -33,8 +33,7 @@
 
 /* function prototypes */
 static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void omninet_close(struct usb_serial_port *port);
-static void omninet_read_bulk_callback(struct urb *urb);
+static void omninet_process_read_urb(struct urb *urb);
 static void omninet_write_bulk_callback(struct urb *urb);
 static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 				const unsigned char *buf, int count);
@@ -61,11 +60,10 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.port_probe =		omninet_port_probe,
 	.port_remove =		omninet_port_remove,
 	.open =			omninet_open,
-	.close =		omninet_close,
 	.write =		omninet_write,
 	.write_room =		omninet_write_room,
-	.read_bulk_callback =	omninet_read_bulk_callback,
 	.write_bulk_callback =	omninet_write_bulk_callback,
+	.process_read_urb =	omninet_process_read_urb,
 	.disconnect =		omninet_disconnect,
 };
 
@@ -74,29 +72,28 @@ static struct usb_serial_driver * const serial_drivers[] = {
 };
 
 
-/* The protocol.
+/*
+ * The protocol.
  *
  * The omni.net always exchange 64 bytes of data with the host. The first
- * four bytes are the control header, you can see it in the above structure.
+ * four bytes are the control header.
  *
  * oh_seq is a sequence number. Don't know if/how it's used.
  * oh_len is the length of the data bytes in the packet.
  * oh_xxx Bit-mapped, related to handshaking and status info.
- *	I normally set it to 0x03 in trasmitted frames.
+ *	I normally set it to 0x03 in transmitted frames.
  *	7: Active when the TA is in a CONNECTed state.
  *	6: unknown
  *	5: handshaking, unknown
  *	4: handshaking, unknown
  *	3: unknown, usually 0
  *	2: unknown, usually 0
- *	1: handshaking, unknown, usually set to 1 in trasmitted frames
- *	0: handshaking, unknown, usually set to 1 in trasmitted frames
+ *	1: handshaking, unknown, usually set to 1 in transmitted frames
+ *	0: handshaking, unknown, usually set to 1 in transmitted frames
  * oh_pad Probably a pad byte.
  *
  * After the header you will find data bytes if oh_len was greater than zero.
- *
  */
-
 struct omninet_header {
 	__u8	oh_seq;
 	__u8	oh_len;
@@ -112,7 +109,7 @@ static int omninet_port_probe(struct usb_serial_port *port)
 {
 	struct omninet_data *od;
 
-	od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL);
+	od = kzalloc(sizeof(*od), GFP_KERNEL);
 	if (!od)
 		return -ENOMEM;
 
@@ -135,56 +132,32 @@ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
 	struct usb_serial_port	*wport;
-	int			result = 0;
 
 	wport = serial->port[1];
 	tty_port_tty_set(&wport->port, tty);
 
-	/* Start reading from the device */
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, result);
-	return result;
-}
-
-static void omninet_close(struct usb_serial_port *port)
-{
-	usb_kill_urb(port->read_urb);
+	return usb_serial_generic_open(tty, port);
 }
 
+#define OMNINET_HEADERLEN	4
+#define OMNINET_BULKOUTSIZE	64
+#define OMNINET_PAYLOADSIZE	(OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN)
 
-#define OMNINET_DATAOFFSET	0x04
-#define OMNINET_HEADERLEN	sizeof(struct omninet_header)
-#define OMNINET_BULKOUTSIZE 	(64 - OMNINET_HEADERLEN)
-
-static void omninet_read_bulk_callback(struct urb *urb)
+static void omninet_process_read_urb(struct urb *urb)
 {
-	struct usb_serial_port 	*port 	= urb->context;
-	unsigned char 		*data 	= urb->transfer_buffer;
-	struct omninet_header 	*header = (struct omninet_header *) &data[0];
-	int status = urb->status;
-	int result;
+	struct usb_serial_port *port = urb->context;
+	const struct omninet_header *hdr = urb->transfer_buffer;
+	const unsigned char *data;
+	size_t data_len;
 
-	if (status) {
-		dev_dbg(&port->dev, "%s - nonzero read bulk status received: %d\n",
-			__func__, status);
+	if (urb->actual_length <= OMNINET_HEADERLEN || !hdr->oh_len)
 		return;
-	}
-
-	if (urb->actual_length && header->oh_len) {
-		tty_insert_flip_string(&port->port, data + OMNINET_DATAOFFSET,
-				header->oh_len);
-		tty_flip_buffer_push(&port->port);
-	}
 
-	/* Continue trying to always read  */
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-			__func__, result);
+	data = (char *)urb->transfer_buffer + OMNINET_HEADERLEN;
+	data_len = min_t(size_t, urb->actual_length - OMNINET_HEADERLEN,
+								hdr->oh_len);
+	tty_insert_flip_string(&port->port, data, data_len);
+	tty_flip_buffer_push(&port->port);
 }
 
 static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -209,9 +182,9 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 		return 0;
 	}
 
-	count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
+	count = (count > OMNINET_PAYLOADSIZE) ? OMNINET_PAYLOADSIZE : count;
 
-	memcpy(wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET,
+	memcpy(wport->write_urb->transfer_buffer + OMNINET_HEADERLEN,
 								buf, count);
 
 	usb_serial_debug_data(&port->dev, __func__, count,
@@ -223,7 +196,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 	header->oh_pad 	= 0x00;
 
 	/* send the data out the bulk port, always 64 bytes */
-	wport->write_urb->transfer_buffer_length = 64;
+	wport->write_urb->transfer_buffer_length = OMNINET_BULKOUTSIZE;
 
 	result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
 	if (result) {
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index e13e1a4..5f4b0cd 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -120,7 +120,10 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
 				0, 0, buffer, 1, 0);
 	kfree(buffer);
 
-	return retval;
+	if (retval < 0)
+		return retval;
+
+	return 0;
 }
 
 static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -306,7 +309,6 @@ static int opticon_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
 	struct opticon_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	bool rts;
@@ -327,15 +329,11 @@ static int opticon_tiocmset(struct tty_struct *tty,
 	if (!changed)
 		return 0;
 
-	/* Send the new RTS state to the connected device */
-	mutex_lock(&serial->disc_mutex);
-	if (!serial->disconnected)
-		ret = send_control_msg(port, CONTROL_RTS, !rts);
-	else
-		ret = -ENODEV;
-	mutex_unlock(&serial->disc_mutex);
+	ret = send_control_msg(port, CONTROL_RTS, !rts);
+	if (ret)
+		return usb_translate_errors(ret);
 
-	return ret;
+	return 0;
 }
 
 static int get_serial_info(struct usb_serial_port *port,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 09cd396..7343728 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -347,6 +347,7 @@ static void option_instat_callback(struct urb *urb);
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
 #define OLIVETTI_PRODUCT_OLICARD100		0xc000
+#define OLIVETTI_PRODUCT_OLICARD145		0xc003
 
 /* Celot products */
 #define CELOT_VENDOR_ID				0x211f
@@ -1273,6 +1274,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
@@ -1350,6 +1352,12 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) },	/* D-Link DWM-156 (variant) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) },	/* D-Link DWM-156 (variant) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 87c71cc..7e3e078 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -124,8 +124,6 @@ static void oti6858_close(struct usb_serial_port *port);
 static void oti6858_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static void oti6858_init_termios(struct tty_struct *tty);
-static int oti6858_ioctl(struct tty_struct *tty,
-			unsigned int cmd, unsigned long arg);
 static void oti6858_read_int_callback(struct urb *urb);
 static void oti6858_read_bulk_callback(struct urb *urb);
 static void oti6858_write_bulk_callback(struct urb *urb);
@@ -136,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty);
 static int oti6858_tiocmget(struct tty_struct *tty);
 static int oti6858_tiocmset(struct tty_struct *tty,
 				unsigned int set, unsigned int clear);
+static int oti6858_tiocmiwait(struct tty_struct *tty, unsigned long arg);
 static int oti6858_port_probe(struct usb_serial_port *port);
 static int oti6858_port_remove(struct usb_serial_port *port);
 
@@ -150,11 +149,11 @@ static struct usb_serial_driver oti6858_device = {
 	.open =			oti6858_open,
 	.close =		oti6858_close,
 	.write =		oti6858_write,
-	.ioctl =		oti6858_ioctl,
 	.set_termios =		oti6858_set_termios,
 	.init_termios = 	oti6858_init_termios,
 	.tiocmget =		oti6858_tiocmget,
 	.tiocmset =		oti6858_tiocmset,
+	.tiocmiwait =		oti6858_tiocmiwait,
 	.read_bulk_callback =	oti6858_read_bulk_callback,
 	.read_int_callback =	oti6858_read_int_callback,
 	.write_bulk_callback =	oti6858_write_bulk_callback,
@@ -650,8 +649,9 @@ static int oti6858_tiocmget(struct tty_struct *tty)
 	return result;
 }
 
-static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+static int oti6858_tiocmiwait(struct tty_struct *tty, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int prev, status;
@@ -662,7 +662,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (1) {
-		wait_event_interruptible(port->delta_msr_wait,
+		wait_event_interruptible(port->port.delta_msr_wait,
 					port->serial->disconnected ||
 					priv->status.pin_state != prev);
 		if (signal_pending(current))
@@ -689,24 +689,6 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	return 0;
 }
 
-static int oti6858_ioctl(struct tty_struct *tty,
-			unsigned int cmd, unsigned long arg)
-{
-	struct usb_serial_port *port = tty->driver_data;
-
-	dev_dbg(&port->dev, "%s(cmd = 0x%04x, arg = 0x%08lx)\n", __func__, cmd, arg);
-
-	switch (cmd) {
-	case TIOCMIWAIT:
-		dev_dbg(&port->dev, "%s(): TIOCMIWAIT\n", __func__);
-		return wait_modem_info(port, arg);
-	default:
-		dev_dbg(&port->dev, "%s(): 0x%04x not supported\n", __func__, cmd);
-		break;
-	}
-	return -ENOIOCTLCMD;
-}
-
 static void oti6858_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port =  urb->context;
@@ -765,7 +747,7 @@ static void oti6858_read_int_callback(struct urb *urb)
 
 		if (!priv->transient) {
 			if (xs->pin_state != priv->status.pin_state)
-				wake_up_interruptible(&port->delta_msr_wait);
+				wake_up_interruptible(&port->port.delta_msr_wait);
 			memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
 		}
 
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3b10018..7151659 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -149,7 +149,7 @@ static int pl2303_vendor_read(__u16 value, __u16 index,
 	int res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
 			value, index, buf, 1, 100);
-	dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x  %d - %x\n",
+	dev_dbg(&serial->interface->dev, "0x%x:0x%x:0x%x:0x%x  %d - %x\n",
 		VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, value, index,
 		res, buf[0]);
 	return res;
@@ -161,7 +161,7 @@ static int pl2303_vendor_write(__u16 value, __u16 index,
 	int res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
 			value, index, NULL, 0, 100);
-	dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x  %d\n",
+	dev_dbg(&serial->interface->dev, "0x%x:0x%x:0x%x:0x%x  %d\n",
 		VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, value, index,
 		res);
 	return res;
@@ -248,14 +248,15 @@ static int pl2303_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
-static int set_control_lines(struct usb_device *dev, u8 value)
+static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value)
 {
+	struct usb_device *dev = port->serial->dev;
 	int retval;
 
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				 SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
 				 value, 0, NULL, 0, 100);
-	dev_dbg(&dev->dev, "%s - value = %d, retval = %d\n", __func__,
+	dev_dbg(&port->dev, "%s - value = %d, retval = %d\n", __func__,
 		value, retval);
 	return retval;
 }
@@ -437,7 +438,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	if (control != priv->line_control) {
 		control = priv->line_control;
 		spin_unlock_irqrestore(&priv->lock, flags);
-		set_control_lines(serial->dev, control);
+		pl2303_set_control_lines(port, control);
 	} else {
 		spin_unlock_irqrestore(&priv->lock, flags);
 	}
@@ -480,7 +481,7 @@ static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
 		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 	control = priv->line_control;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	set_control_lines(port->serial->dev, control);
+	pl2303_set_control_lines(port, control);
 }
 
 static void pl2303_close(struct usb_serial_port *port)
@@ -530,7 +531,6 @@ static int pl2303_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;
@@ -548,14 +548,11 @@ static int pl2303_tiocmset(struct tty_struct *tty,
 	control = priv->line_control;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	mutex_lock(&serial->disc_mutex);
-	if (!serial->disconnected)
-		ret = set_control_lines(serial->dev, control);
-	else
-		ret = -ENODEV;
-	mutex_unlock(&serial->disc_mutex);
+	ret = pl2303_set_control_lines(port, control);
+	if (ret)
+		return usb_translate_errors(ret);
 
-	return ret;
+	return 0;
 }
 
 static int pl2303_tiocmget(struct tty_struct *tty)
@@ -592,8 +589,9 @@ static int pl2303_carrier_raised(struct usb_serial_port *port)
 	return 0;
 }
 
-static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+static int pl2303_tiocmiwait(struct tty_struct *tty, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int prevstatus;
@@ -605,7 +603,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (1) {
-		interruptible_sleep_on(&port->delta_msr_wait);
+		interruptible_sleep_on(&port->port.delta_msr_wait);
 		/* see if a signal did it */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
@@ -651,10 +649,6 @@ static int pl2303_ioctl(struct tty_struct *tty,
 			return -EFAULT;
 
 		return 0;
-
-	case TIOCMIWAIT:
-		dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__);
-		return wait_modem_info(port, arg);
 	default:
 		dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd);
 		break;
@@ -720,7 +714,7 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 	spin_unlock_irqrestore(&priv->lock, flags);
 	if (priv->line_status & UART_BREAK_ERROR)
 		usb_serial_handle_break(port);
-	wake_up_interruptible(&port->delta_msr_wait);
+	wake_up_interruptible(&port->port.delta_msr_wait);
 
 	tty = tty_port_tty_get(&port->port);
 	if (!tty)
@@ -784,7 +778,7 @@ static void pl2303_process_read_urb(struct urb *urb)
 	line_status = priv->line_status;
 	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	wake_up_interruptible(&port->delta_msr_wait);
+	wake_up_interruptible(&port->port.delta_msr_wait);
 
 	if (!urb->actual_length)
 		return;
@@ -835,6 +829,7 @@ static struct usb_serial_driver pl2303_device = {
 	.set_termios =		pl2303_set_termios,
 	.tiocmget =		pl2303_tiocmget,
 	.tiocmset =		pl2303_tiocmset,
+	.tiocmiwait =		pl2303_tiocmiwait,
 	.process_read_urb =	pl2303_process_read_urb,
 	.read_int_callback =	pl2303_read_int_callback,
 	.attach =		pl2303_startup,
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index ef3a7d5..02b0803 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -127,8 +127,6 @@ struct qt2_port_private {
 	u8          shadowLSR;
 	u8          shadowMSR;
 
-	struct async_icount icount;
-
 	struct usb_serial_port *port;
 };
 
@@ -420,12 +418,6 @@ static void qt2_close(struct usb_serial_port *port)
 	port_priv->urb_in_use = false;
 	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 
-	mutex_lock(&port->serial->disc_mutex);
-	if (port->serial->disconnected) {
-		mutex_unlock(&port->serial->disc_mutex);
-		return;
-	}
-
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
 			    usb_rcvctrlpipe(serial->dev, 0),
@@ -456,8 +448,6 @@ static void qt2_close(struct usb_serial_port *port)
 	if (i < 0)
 		dev_err(&port->dev, "%s - close port failed %i\n",
 			__func__, i);
-
-	mutex_unlock(&port->serial->disc_mutex);
 }
 
 static void qt2_disconnect(struct usb_serial *serial)
@@ -490,71 +480,6 @@ static int get_serial_info(struct usb_serial_port *port,
 	return 0;
 }
 
-static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
-{
-	struct qt2_port_private *priv = usb_get_serial_port_data(port);
-	struct async_icount prev, cur;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	prev = priv->icount;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	while (1) {
-		wait_event_interruptible(port->delta_msr_wait,
-					 (port->serial->disconnected ||
-					  (priv->icount.rng != prev.rng) ||
-					  (priv->icount.dsr != prev.dsr) ||
-					  (priv->icount.dcd != prev.dcd) ||
-					  (priv->icount.cts != prev.cts)));
-
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-
-		if (port->serial->disconnected)
-			return -EIO;
-
-		spin_lock_irqsave(&priv->lock, flags);
-		cur = priv->icount;
-		spin_unlock_irqrestore(&priv->lock, flags);
-
-		if ((prev.rng == cur.rng) &&
-		    (prev.dsr == cur.dsr) &&
-		    (prev.dcd == cur.dcd) &&
-		    (prev.cts == cur.cts))
-			return -EIO;
-
-		if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) ||
-		    (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) ||
-		    (arg & TIOCM_CD && (prev.dcd != cur.dcd)) ||
-		    (arg & TIOCM_CTS && (prev.cts != cur.cts)))
-			return 0;
-	}
-	return 0;
-}
-
-static int qt2_get_icount(struct tty_struct *tty,
-			  struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct qt2_port_private *priv = usb_get_serial_port_data(port);
-	struct async_icount cnow = priv->icount;
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-
-	return 0;
-}
-
 static int qt2_ioctl(struct tty_struct *tty,
 		     unsigned int cmd, unsigned long arg)
 {
@@ -564,10 +489,6 @@ static int qt2_ioctl(struct tty_struct *tty,
 	case TIOCGSERIAL:
 		return get_serial_info(port,
 				       (struct serial_struct __user *)arg);
-
-	case TIOCMIWAIT:
-		return wait_modem_info(port, arg);
-
 	default:
 		break;
 	}
@@ -948,18 +869,15 @@ static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch)
 	if (newMSR & UART_MSR_ANY_DELTA) {
 		/* update input line counters */
 		if (newMSR & UART_MSR_DCTS)
-			port_priv->icount.cts++;
-
+			port->icount.cts++;
 		if (newMSR & UART_MSR_DDSR)
-			port_priv->icount.dsr++;
-
+			port->icount.dsr++;
 		if (newMSR & UART_MSR_DDCD)
-			port_priv->icount.dcd++;
-
+			port->icount.dcd++;
 		if (newMSR & UART_MSR_TERI)
-			port_priv->icount.rng++;
+			port->icount.rng++;
 
-		wake_up_interruptible(&port->delta_msr_wait);
+		wake_up_interruptible(&port->port.delta_msr_wait);
 	}
 }
 
@@ -979,7 +897,7 @@ static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch)
 	port_priv->shadowLSR = newLSR;
 	spin_unlock_irqrestore(&port_priv->lock, flags);
 
-	icount = &port_priv->icount;
+	icount = &port->icount;
 
 	if (newLSR & UART_LSR_BRK_ERROR_BITS) {
 
@@ -1089,7 +1007,8 @@ static struct usb_serial_driver qt2_device = {
 	.break_ctl           = qt2_break_ctl,
 	.tiocmget            = qt2_tiocmget,
 	.tiocmset            = qt2_tiocmset,
-	.get_icount	     = qt2_get_icount,
+	.tiocmiwait          = usb_serial_generic_tiocmiwait,
+	.get_icount	     = usb_serial_generic_get_icount,
 	.ioctl               = qt2_ioctl,
 	.set_termios         = qt2_set_termios,
 };
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index d66148a..8894665 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -774,30 +774,25 @@ static void sierra_close(struct usb_serial_port *port)
 	portdata->rts_state = 0;
 	portdata->dtr_state = 0;
 
-	if (serial->dev) {
-		mutex_lock(&serial->disc_mutex);
-		if (!serial->disconnected) {
-			serial->interface->needs_remote_wakeup = 0;
-			/* odd error handling due to pm counters */
-			if (!usb_autopm_get_interface(serial->interface))
-				sierra_send_setup(port);
-			else
-				usb_autopm_get_interface_no_resume(serial->interface);
-				
-		}
-		mutex_unlock(&serial->disc_mutex);
-		spin_lock_irq(&intfdata->susp_lock);
-		portdata->opened = 0;
-		spin_unlock_irq(&intfdata->susp_lock);
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected) {
+		serial->interface->needs_remote_wakeup = 0;
+		/* odd error handling due to pm counters */
+		if (!usb_autopm_get_interface(serial->interface))
+			sierra_send_setup(port);
+		else
+			usb_autopm_get_interface_no_resume(serial->interface);
 
+	}
+	mutex_unlock(&serial->disc_mutex);
+	spin_lock_irq(&intfdata->susp_lock);
+	portdata->opened = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
 
-		/* Stop reading urbs */
-		sierra_stop_rx_urbs(port);
-		/* .. and release them */
-		for (i = 0; i < portdata->num_in_urbs; i++) {
-			sierra_release_urb(portdata->in_urbs[i]);
-			portdata->in_urbs[i] = NULL;
-		}
+	sierra_stop_rx_urbs(port);
+	for (i = 0; i < portdata->num_in_urbs; i++) {
+		sierra_release_urb(portdata->in_urbs[i]);
+		portdata->in_urbs[i] = NULL;
 	}
 }
 
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 549ef68..cf3df79 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -1,7 +1,7 @@
 /*
  * spcp8x5 USB to serial adaptor driver
  *
- * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com)
+ * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com)
  * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
  * Copyright (C) 2006 S1 Corp.
  *
@@ -13,8 +13,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
- *
  */
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -28,7 +26,10 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-#define DRIVER_DESC 	"SPCP8x5 USB to serial adaptor driver"
+#define DRIVER_DESC	"SPCP8x5 USB to serial adaptor driver"
+
+#define SPCP825_QUIRK_NO_UART_STATUS	0x01
+#define SPCP825_QUIRK_NO_WORK_MODE	0x02
 
 #define SPCP8x5_007_VID		0x04FC
 #define SPCP8x5_007_PID		0x0201
@@ -46,13 +47,15 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
 	{ USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
 	{ USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
-	{ USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)},
+	{ USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
+	  .driver_info = SPCP825_QUIRK_NO_UART_STATUS |
+				SPCP825_QUIRK_NO_WORK_MODE },
 	{ }					/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
 struct spcp8x5_usb_ctrl_arg {
-	u8 	type;
+	u8	type;
 	u8	cmd;
 	u8	cmd_type;
 	u16	value;
@@ -138,49 +141,33 @@ struct spcp8x5_usb_ctrl_arg {
 #define UART_OVERRUN_ERROR		0x40
 #define UART_CTS			0x80
 
-enum spcp8x5_type {
-	SPCP825_007_TYPE,
-	SPCP825_008_TYPE,
-	SPCP825_PHILIP_TYPE,
-	SPCP825_INTERMATIC_TYPE,
-	SPCP835_TYPE,
-};
-
 struct spcp8x5_private {
-	spinlock_t 	lock;
-	enum spcp8x5_type	type;
-	u8 			line_control;
-	u8 			line_status;
+	unsigned		quirks;
+	spinlock_t		lock;
+	u8			line_control;
 };
 
+static int spcp8x5_probe(struct usb_serial *serial,
+						const struct usb_device_id *id)
+{
+	usb_set_serial_data(serial, (void *)id);
+
+	return 0;
+}
+
 static int spcp8x5_port_probe(struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
+	const struct usb_device_id *id = usb_get_serial_data(port->serial);
 	struct spcp8x5_private *priv;
-	enum spcp8x5_type type = SPCP825_007_TYPE;
-	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
-
-	if (product == 0x0201)
-		type = SPCP825_007_TYPE;
-	else if (product == 0x0231)
-		type = SPCP835_TYPE;
-	else if (product == 0x0235)
-		type = SPCP825_008_TYPE;
-	else if (product == 0x0204)
-		type = SPCP825_INTERMATIC_TYPE;
-	else if (product == 0x0471 &&
-		 serial->dev->descriptor.idVendor == cpu_to_le16(0x081e))
-		type = SPCP825_PHILIP_TYPE;
-	dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type);
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	spin_lock_init(&priv->lock);
-	priv->type = type;
+	priv->quirks = id->driver_info;
 
-	usb_set_serial_port_data(port , priv);
+	usb_set_serial_port_data(port, priv);
 
 	return 0;
 }
@@ -195,86 +182,79 @@ static int spcp8x5_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
-/* set the modem control line of the device.
- * NOTE spcp825-007 not supported this */
-static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value,
-				enum spcp8x5_type type)
+static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
 {
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
 	int retval;
-	u8 mcr = 0 ;
 
-	if (type == SPCP825_007_TYPE)
+	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
 		return -EPERM;
 
-	mcr = (unsigned short)value;
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				 SET_UART_STATUS_TYPE, SET_UART_STATUS,
 				 mcr, 0x04, NULL, 0, 100);
-	if (retval != 0)
-		dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval);
+	if (retval != 0) {
+		dev_err(&port->dev, "failed to set control lines: %d\n",
+								retval);
+	}
 	return retval;
 }
 
-/* get the modem status register of the device
- * NOTE spcp825-007 not supported this */
-static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
-			   enum spcp8x5_type type)
+static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
 {
-	u8 *status_buffer;
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
+	u8 *buf;
 	int ret;
 
-	/* I return Permited not support here but seem inval device
-	 * is more fix */
-	if (type == SPCP825_007_TYPE)
+	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
 		return -EPERM;
-	if (status == NULL)
-		return -EINVAL;
 
-	status_buffer = kmalloc(1, GFP_KERNEL);
-	if (!status_buffer)
+	buf = kzalloc(1, GFP_KERNEL);
+	if (!buf)
 		return -ENOMEM;
-	status_buffer[0] = status[0];
 
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 			      GET_UART_STATUS, GET_UART_STATUS_TYPE,
-			      0, GET_UART_STATUS_MSR, status_buffer, 1, 100);
+			      0, GET_UART_STATUS_MSR, buf, 1, 100);
 	if (ret < 0)
-		dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)",
-			status_buffer, ret);
+		dev_err(&port->dev, "failed to get modem status: %d", ret);
 
-	dev_dbg(&dev->dev, "0xc0:0x22:0:6  %d - 0x%p ", ret, status_buffer);
-	status[0] = status_buffer[0];
-	kfree(status_buffer);
+	dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x", ret, *buf);
+	*status = *buf;
+	kfree(buf);
 
 	return ret;
 }
 
-/* select the work mode.
- * NOTE this function not supported by spcp825-007 */
-static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
-				 u16 index, enum spcp8x5_type type)
+static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
+								 u16 index)
 {
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *dev = port->serial->dev;
 	int ret;
 
-	/* I return Permited not support here but seem inval device
-	 * is more fix */
-	if (type == SPCP825_007_TYPE)
+	if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
 		return;
 
 	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			      SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
 			      value, index, NULL, 0, 100);
-	dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index);
+	dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
 	if (ret < 0)
-		dev_dbg(&dev->dev,
-			"RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
+		dev_err(&port->dev, "failed to set work mode: %d\n", ret);
 }
 
 static int spcp8x5_carrier_raised(struct usb_serial_port *port)
 {
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	if (priv->line_status & MSR_STATUS_LINE_DCD)
+	u8 msr;
+	int ret;
+
+	ret = spcp8x5_get_msr(port, &msr);
+	if (ret || msr & MSR_STATUS_LINE_DCD)
 		return 1;
+
 	return 0;
 }
 
@@ -293,20 +273,17 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
 						| MCR_CONTROL_LINE_RTS);
 	control = priv->line_control;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+	spcp8x5_set_ctrl_line(port, control);
 }
 
 static void spcp8x5_init_termios(struct tty_struct *tty)
 {
-	/* for the 1st time call this function */
 	tty->termios = tty_std_termios;
 	tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
 	tty->termios.c_ispeed = 115200;
 	tty->termios.c_ospeed = 115200;
 }
 
-/* set the serial param for transfer. we should check if we really need to
- * transfer. if we set flow control we should do this too. */
 static void spcp8x5_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -321,7 +298,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	int i;
 	u8 control;
 
-
 	/* check that they really want us to change something */
 	if (!tty_termios_hw_change(&tty->termios, old_termios))
 		return;
@@ -337,7 +313,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	if (control != priv->line_control) {
 		control = priv->line_control;
 		spin_unlock_irqrestore(&priv->lock, flags);
-		spcp8x5_set_ctrlLine(serial->dev, control , priv->type);
+		spcp8x5_set_ctrl_line(port, control);
 	} else {
 		spin_unlock_irqrestore(&priv->lock, flags);
 	}
@@ -397,9 +373,9 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	if (cflag & PARENB) {
 		buf[1] |= (cflag & PARODD) ?
 		SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
-	} else
+	} else {
 		buf[1] |= SET_UART_FORMAT_PAR_NONE;
-
+	}
 	uartdata = buf[0] | buf[1]<<8;
 
 	i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
@@ -412,22 +388,16 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 
 	if (cflag & CRTSCTS) {
 		/* enable hardware flow control */
-		spcp8x5_set_workMode(serial->dev, 0x000a,
-				     SET_WORKING_MODE_U2C, priv->type);
+		spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
 	}
 }
 
-/* open the serial port. do some usb system call. set termios and get the line
- * status of the device. */
 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	int ret;
-	unsigned long flags;
-	u8 status = 0x30;
-	/* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */
 
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
@@ -438,142 +408,16 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (ret)
 		return ret;
 
-	spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
+	spcp8x5_set_ctrl_line(port, priv->line_control);
 
-	/* Setup termios */
 	if (tty)
 		spcp8x5_set_termios(tty, port, &tmp_termios);
 
-	spcp8x5_get_msr(serial->dev, &status, priv->type);
-
-	/* may be we should update uart status here but now we did not do */
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->line_status = status & 0xf0 ;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	port->port.drain_delay = 256;
 
 	return usb_serial_generic_open(tty, port);
 }
 
-static void spcp8x5_process_read_urb(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	unsigned char *data = urb->transfer_buffer;
-	unsigned long flags;
-	u8 status;
-	char tty_flag;
-
-	/* get tty_flag from status */
-	tty_flag = TTY_NORMAL;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	status = priv->line_status;
-	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
-	spin_unlock_irqrestore(&priv->lock, flags);
-	/* wake up the wait for termios */
-	wake_up_interruptible(&port->delta_msr_wait);
-
-	if (!urb->actual_length)
-		return;
-
-
-	if (status & UART_STATE_TRANSIENT_MASK) {
-		/* break takes precedence over parity, which takes precedence
-		 * over framing errors */
-		if (status & UART_BREAK_ERROR)
-			tty_flag = TTY_BREAK;
-		else if (status & UART_PARITY_ERROR)
-			tty_flag = TTY_PARITY;
-		else if (status & UART_FRAME_ERROR)
-			tty_flag = TTY_FRAME;
-		dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
-
-		/* overrun is special, not associated with a char */
-		if (status & UART_OVERRUN_ERROR)
-			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
-
-		if (status & UART_DCD) {
-			struct tty_struct *tty = tty_port_tty_get(&port->port);
-			if (tty) {
-				usb_serial_handle_dcd_change(port, tty,
-				       priv->line_status & MSR_STATUS_LINE_DCD);
-				tty_kref_put(tty);
-			}
-		}
-	}
-
-	tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
-							urb->actual_length);
-	tty_flip_buffer_push(&port->port);
-}
-
-static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
-				   unsigned int arg)
-{
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	unsigned int prevstatus;
-	unsigned int status;
-	unsigned int changed;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	prevstatus = priv->line_status;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	while (1) {
-		/* wake up in bulk read */
-		interruptible_sleep_on(&port->delta_msr_wait);
-
-		/* see if a signal did it */
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-
-		if (port->serial->disconnected)
-			return -EIO;
-
-		spin_lock_irqsave(&priv->lock, flags);
-		status = priv->line_status;
-		spin_unlock_irqrestore(&priv->lock, flags);
-
-		changed = prevstatus^status;
-
-		if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) ||
-		    ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) ||
-		    ((arg & TIOCM_CD)  && (changed & MSR_STATUS_LINE_DCD)) ||
-		    ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS)))
-			return 0;
-
-		prevstatus = status;
-	}
-	/* NOTREACHED */
-	return 0;
-}
-
-static int spcp8x5_ioctl(struct tty_struct *tty,
-			 unsigned int cmd, unsigned long arg)
-{
-	struct usb_serial_port *port = tty->driver_data;
-
-	dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__,
-		port->number, cmd);
-
-	switch (cmd) {
-	case TIOCMIWAIT:
-		dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,
-			port->number);
-		return spcp8x5_wait_modem_info(port, arg);
-
-	default:
-		dev_dbg(&port->dev, "%s not supported = 0x%04x", __func__,
-			cmd);
-		break;
-	}
-
-	return -ENOIOCTLCMD;
-}
-
 static int spcp8x5_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
@@ -594,7 +438,7 @@ static int spcp8x5_tiocmset(struct tty_struct *tty,
 	control = priv->line_control;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+	return spcp8x5_set_ctrl_line(port, control);
 }
 
 static int spcp8x5_tiocmget(struct tty_struct *tty)
@@ -603,12 +447,15 @@ static int spcp8x5_tiocmget(struct tty_struct *tty)
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int mcr;
-	unsigned int status;
+	u8 status;
 	unsigned int result;
 
+	result = spcp8x5_get_msr(port, &status);
+	if (result)
+		return result;
+
 	spin_lock_irqsave(&priv->lock, flags);
 	mcr = priv->line_control;
-	status = priv->line_status;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	result = ((mcr & MCR_DTR)			? TIOCM_DTR : 0)
@@ -621,7 +468,6 @@ static int spcp8x5_tiocmget(struct tty_struct *tty)
 	return result;
 }
 
-/* All of the device info needed for the spcp8x5 SIO serial converter */
 static struct usb_serial_driver spcp8x5_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -629,17 +475,16 @@ static struct usb_serial_driver spcp8x5_device = {
 	},
 	.id_table		= id_table,
 	.num_ports		= 1,
-	.open 			= spcp8x5_open,
+	.open			= spcp8x5_open,
 	.dtr_rts		= spcp8x5_dtr_rts,
 	.carrier_raised		= spcp8x5_carrier_raised,
-	.set_termios 		= spcp8x5_set_termios,
+	.set_termios		= spcp8x5_set_termios,
 	.init_termios		= spcp8x5_init_termios,
-	.ioctl 			= spcp8x5_ioctl,
-	.tiocmget 		= spcp8x5_tiocmget,
-	.tiocmset 		= spcp8x5_tiocmset,
+	.tiocmget		= spcp8x5_tiocmget,
+	.tiocmset		= spcp8x5_tiocmset,
+	.probe			= spcp8x5_probe,
 	.port_probe		= spcp8x5_port_probe,
 	.port_remove		= spcp8x5_port_remove,
-	.process_read_urb	= spcp8x5_process_read_urb,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 4b2a197..5b62dbb 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -61,7 +61,6 @@ struct ssu100_port_private {
 	spinlock_t status_lock;
 	u8 shadowLSR;
 	u8 shadowMSR;
-	struct async_icount icount;
 };
 
 static inline int ssu100_control_msg(struct usb_device *dev,
@@ -315,11 +314,6 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
 	return usb_serial_generic_open(tty, port);
 }
 
-static void ssu100_close(struct usb_serial_port *port)
-{
-	usb_serial_generic_close(port);
-}
-
 static int get_serial_info(struct usb_serial_port *port,
 			   struct serial_struct __user *retinfo)
 {
@@ -343,73 +337,6 @@ static int get_serial_info(struct usb_serial_port *port,
 	return 0;
 }
 
-static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
-{
-	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
-	struct async_icount prev, cur;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->status_lock, flags);
-	prev = priv->icount;
-	spin_unlock_irqrestore(&priv->status_lock, flags);
-
-	while (1) {
-		wait_event_interruptible(port->delta_msr_wait,
-					 (port->serial->disconnected ||
-					  (priv->icount.rng != prev.rng) ||
-					  (priv->icount.dsr != prev.dsr) ||
-					  (priv->icount.dcd != prev.dcd) ||
-					  (priv->icount.cts != prev.cts)));
-
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-
-		if (port->serial->disconnected)
-			return -EIO;
-
-		spin_lock_irqsave(&priv->status_lock, flags);
-		cur = priv->icount;
-		spin_unlock_irqrestore(&priv->status_lock, flags);
-
-		if ((prev.rng == cur.rng) &&
-		    (prev.dsr == cur.dsr) &&
-		    (prev.dcd == cur.dcd) &&
-		    (prev.cts == cur.cts))
-			return -EIO;
-
-		if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) ||
-		    (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) ||
-		    (arg & TIOCM_CD  && (prev.dcd != cur.dcd)) ||
-		    (arg & TIOCM_CTS && (prev.cts != cur.cts)))
-			return 0;
-	}
-	return 0;
-}
-
-static int ssu100_get_icount(struct tty_struct *tty,
-			struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
-	struct async_icount cnow = priv->icount;
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-
-	return 0;
-}
-
-
-
 static int ssu100_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
@@ -421,10 +348,6 @@ static int ssu100_ioctl(struct tty_struct *tty,
 	case TIOCGSERIAL:
 		return get_serial_info(port,
 				       (struct serial_struct __user *) arg);
-
-	case TIOCMIWAIT:
-		return wait_modem_info(port, arg);
-
 	default:
 		break;
 	}
@@ -532,14 +455,14 @@ static void ssu100_update_msr(struct usb_serial_port *port, u8 msr)
 	if (msr & UART_MSR_ANY_DELTA) {
 		/* update input line counters */
 		if (msr & UART_MSR_DCTS)
-			priv->icount.cts++;
+			port->icount.cts++;
 		if (msr & UART_MSR_DDSR)
-			priv->icount.dsr++;
+			port->icount.dsr++;
 		if (msr & UART_MSR_DDCD)
-			priv->icount.dcd++;
+			port->icount.dcd++;
 		if (msr & UART_MSR_TERI)
-			priv->icount.rng++;
-		wake_up_interruptible(&port->delta_msr_wait);
+			port->icount.rng++;
+		wake_up_interruptible(&port->port.delta_msr_wait);
 	}
 }
 
@@ -558,22 +481,22 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
 		/* we always want to update icount, but we only want to
 		 * update tty_flag for one case */
 		if (lsr & UART_LSR_BI) {
-			priv->icount.brk++;
+			port->icount.brk++;
 			*tty_flag = TTY_BREAK;
 			usb_serial_handle_break(port);
 		}
 		if (lsr & UART_LSR_PE) {
-			priv->icount.parity++;
+			port->icount.parity++;
 			if (*tty_flag == TTY_NORMAL)
 				*tty_flag = TTY_PARITY;
 		}
 		if (lsr & UART_LSR_FE) {
-			priv->icount.frame++;
+			port->icount.frame++;
 			if (*tty_flag == TTY_NORMAL)
 				*tty_flag = TTY_FRAME;
 		}
 		if (lsr & UART_LSR_OE){
-			priv->icount.overrun++;
+			port->icount.overrun++;
 			if (*tty_flag == TTY_NORMAL)
 				*tty_flag = TTY_OVERRUN;
 		}
@@ -630,7 +553,6 @@ static struct usb_serial_driver ssu100_device = {
 	.id_table	     = id_table,
 	.num_ports	     = 1,
 	.open		     = ssu100_open,
-	.close		     = ssu100_close,
 	.attach              = ssu100_attach,
 	.port_probe          = ssu100_port_probe,
 	.port_remove         = ssu100_port_remove,
@@ -638,10 +560,10 @@ static struct usb_serial_driver ssu100_device = {
 	.process_read_urb    = ssu100_process_read_urb,
 	.tiocmget            = ssu100_tiocmget,
 	.tiocmset            = ssu100_tiocmset,
-	.get_icount	     = ssu100_get_icount,
+	.tiocmiwait          = usb_serial_generic_tiocmiwait,
+	.get_icount	     = usb_serial_generic_get_icount,
 	.ioctl               = ssu100_ioctl,
 	.set_termios         = ssu100_set_termios,
-	.disconnect          = usb_serial_generic_disconnect,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index be05e6c..9b16489 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -1,6 +1,7 @@
 /*
  * Symbol USB barcode to serial driver
  *
+ * Copyright (C) 2013 Johan Hovold <jhovold@gmail.com>
  * Copyright (C) 2009 Greg Kroah-Hartman <gregkh@suse.de>
  * Copyright (C) 2009 Novell Inc.
  *
@@ -26,27 +27,17 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-/* This structure holds all of the individual device information */
 struct symbol_private {
-	struct usb_device *udev;
-	struct usb_serial *serial;
-	struct usb_serial_port *port;
-	unsigned char *int_buffer;
-	struct urb *int_urb;
-	int buffer_size;
-	u8 bInterval;
-	u8 int_address;
 	spinlock_t lock;	/* protects the following flags */
 	bool throttled;
 	bool actually_throttled;
-	bool rts;
 };
 
 static void symbol_int_callback(struct urb *urb)
 {
-	struct symbol_private *priv = urb->context;
+	struct usb_serial_port *port = urb->context;
+	struct symbol_private *priv = usb_get_serial_port_data(port);
 	unsigned char *data = urb->transfer_buffer;
-	struct usb_serial_port *port = priv->port;
 	int status = urb->status;
 	int result;
 	int data_length;
@@ -84,7 +75,7 @@ static void symbol_int_callback(struct urb *urb)
 		tty_insert_flip_string(&port->port, &data[1], data_length);
 		tty_flip_buffer_push(&port->port);
 	} else {
-		dev_dbg(&priv->udev->dev,
+		dev_dbg(&port->dev,
 			"Improper amount of data received from the device, "
 			"%d bytes", urb->actual_length);
 	}
@@ -94,12 +85,7 @@ exit:
 
 	/* Continue trying to always read if we should */
 	if (!priv->throttled) {
-		usb_fill_int_urb(priv->int_urb, priv->udev,
-				 usb_rcvintpipe(priv->udev,
-				 		priv->int_address),
-				 priv->int_buffer, priv->buffer_size,
-				 symbol_int_callback, priv, priv->bInterval);
-		result = usb_submit_urb(priv->int_urb, GFP_ATOMIC);
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 		if (result)
 			dev_err(&port->dev,
 			    "%s - failed resubmitting read urb, error %d\n",
@@ -118,15 +104,10 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port)
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->throttled = false;
 	priv->actually_throttled = false;
-	priv->port = port;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* Start reading from the device */
-	usb_fill_int_urb(priv->int_urb, priv->udev,
-			 usb_rcvintpipe(priv->udev, priv->int_address),
-			 priv->int_buffer, priv->buffer_size,
-			 symbol_int_callback, priv, priv->bInterval);
-	result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result)
 		dev_err(&port->dev,
 			"%s - failed resubmitting read urb, error %d\n",
@@ -136,10 +117,7 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void symbol_close(struct usb_serial_port *port)
 {
-	struct symbol_private *priv = usb_get_serial_data(port->serial);
-
-	/* shutdown our urbs */
-	usb_kill_urb(priv->int_urb);
+	usb_kill_urb(port->interrupt_in_urb);
 }
 
 static void symbol_throttle(struct tty_struct *tty)
@@ -166,7 +144,7 @@ static void symbol_unthrottle(struct tty_struct *tty)
 	spin_unlock_irq(&priv->lock);
 
 	if (was_throttled) {
-		result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (result)
 			dev_err(&port->dev,
 				"%s - failed submitting read urb, error %d\n",
@@ -176,89 +154,36 @@ static void symbol_unthrottle(struct tty_struct *tty)
 
 static int symbol_startup(struct usb_serial *serial)
 {
+	if (!serial->num_interrupt_in) {
+		dev_err(&serial->dev->dev, "no interrupt-in endpoint\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int symbol_port_probe(struct usb_serial_port *port)
+{
 	struct symbol_private *priv;
-	struct usb_host_interface *intf;
-	int i;
-	int retval = -ENOMEM;
-	bool int_in_found = false;
 
-	/* create our private serial structure */
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (priv == NULL) {
-		dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+	if (!priv)
 		return -ENOMEM;
-	}
+
 	spin_lock_init(&priv->lock);
-	priv->serial = serial;
-	priv->port = serial->port[0];
-	priv->udev = serial->dev;
-
-	/* find our interrupt endpoint */
-	intf = serial->interface->altsetting;
-	for (i = 0; i < intf->desc.bNumEndpoints; ++i) {
-		struct usb_endpoint_descriptor *endpoint;
-
-		endpoint = &intf->endpoint[i].desc;
-		if (!usb_endpoint_is_int_in(endpoint))
-			continue;
-
-		priv->int_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!priv->int_urb) {
-			dev_err(&priv->udev->dev, "out of memory\n");
-			goto error;
-		}
-
-		priv->buffer_size = usb_endpoint_maxp(endpoint) * 2;
-		priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
-		if (!priv->int_buffer) {
-			dev_err(&priv->udev->dev, "out of memory\n");
-			goto error;
-		}
-
-		priv->int_address = endpoint->bEndpointAddress;
-		priv->bInterval = endpoint->bInterval;
-
-		/* set up our int urb */
-		usb_fill_int_urb(priv->int_urb, priv->udev,
-				 usb_rcvintpipe(priv->udev,
-				 		endpoint->bEndpointAddress),
-				 priv->int_buffer, priv->buffer_size,
-				 symbol_int_callback, priv, priv->bInterval);
-
-		int_in_found = true;
-		break;
-		}
 
-	if (!int_in_found) {
-		dev_err(&priv->udev->dev,
-			"Error - the proper endpoints were not found!\n");
-		goto error;
-	}
+	usb_set_serial_port_data(port, priv);
 
-	usb_set_serial_data(serial, priv);
 	return 0;
-
-error:
-	usb_free_urb(priv->int_urb);
-	kfree(priv->int_buffer);
-	kfree(priv);
-	return retval;
-}
-
-static void symbol_disconnect(struct usb_serial *serial)
-{
-	struct symbol_private *priv = usb_get_serial_data(serial);
-
-	usb_kill_urb(priv->int_urb);
-	usb_free_urb(priv->int_urb);
 }
 
-static void symbol_release(struct usb_serial *serial)
+static int symbol_port_remove(struct usb_serial_port *port)
 {
-	struct symbol_private *priv = usb_get_serial_data(serial);
+	struct symbol_private *priv = usb_get_serial_port_data(port);
 
-	kfree(priv->int_buffer);
 	kfree(priv);
+
+	return 0;
 }
 
 static struct usb_serial_driver symbol_device = {
@@ -269,12 +194,13 @@ static struct usb_serial_driver symbol_device = {
 	.id_table =		id_table,
 	.num_ports =		1,
 	.attach =		symbol_startup,
+	.port_probe =		symbol_port_probe,
+	.port_remove =		symbol_port_remove,
 	.open =			symbol_open,
 	.close =		symbol_close,
-	.disconnect =		symbol_disconnect,
-	.release =		symbol_release,
 	.throttle = 		symbol_throttle,
 	.unthrottle =		symbol_unthrottle,
+	.read_int_callback =	symbol_int_callback,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 19a71a9..cac47ae 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -67,13 +67,10 @@
 struct ti_port {
 	int			tp_is_open;
 	__u8			tp_msr;
-	__u8			tp_lsr;
 	__u8			tp_shadow_mcr;
 	__u8			tp_uart_mode;	/* 232 or 485 modes */
 	unsigned int		tp_uart_base_addr;
 	int			tp_flags;
-	int			tp_closing_wait;/* in .01 secs */
-	struct async_icount	tp_icount;
 	wait_queue_head_t	tp_write_wait;
 	struct ti_device	*tp_tdev;
 	struct usb_serial_port	*tp_port;
@@ -108,8 +105,6 @@ static void ti_throttle(struct tty_struct *tty);
 static void ti_unthrottle(struct tty_struct *tty);
 static int ti_ioctl(struct tty_struct *tty,
 		unsigned int cmd, unsigned long arg);
-static int ti_get_icount(struct tty_struct *tty,
-		struct serial_icounter_struct *icount);
 static void ti_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
 static int ti_tiocmget(struct tty_struct *tty);
@@ -124,15 +119,13 @@ static void ti_recv(struct usb_serial_port *port, unsigned char *data,
 		int length);
 static void ti_send(struct ti_port *tport);
 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
-static int ti_get_lsr(struct ti_port *tport);
+static int ti_get_lsr(struct ti_port *tport, u8 *lsr);
 static int ti_get_serial_info(struct ti_port *tport,
 	struct serial_struct __user *ret_arg);
 static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 	struct serial_struct __user *new_arg);
 static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
 
-static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush);
-
 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
 
@@ -235,7 +228,8 @@ static struct usb_serial_driver ti_1port_device = {
 	.set_termios		= ti_set_termios,
 	.tiocmget		= ti_tiocmget,
 	.tiocmset		= ti_tiocmset,
-	.get_icount		= ti_get_icount,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
 	.break_ctl		= ti_break,
 	.read_int_callback	= ti_interrupt_callback,
 	.read_bulk_callback	= ti_bulk_in_callback,
@@ -265,7 +259,8 @@ static struct usb_serial_driver ti_2port_device = {
 	.set_termios		= ti_set_termios,
 	.tiocmget		= ti_tiocmget,
 	.tiocmset		= ti_tiocmset,
-	.get_icount		= ti_get_icount,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
 	.break_ctl		= ti_break,
 	.read_int_callback	= ti_interrupt_callback,
 	.read_bulk_callback	= ti_bulk_in_callback,
@@ -430,7 +425,7 @@ static int ti_port_probe(struct usb_serial_port *port)
 		tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
 	else
 		tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
-	tport->tp_closing_wait = closing_wait;
+	port->port.closing_wait = msecs_to_jiffies(10 * closing_wait);
 	init_waitqueue_head(&tport->tp_write_wait);
 	if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) {
 		kfree(tport);
@@ -480,8 +475,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	port_number = port->number - port->serial->minor;
 
-	memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
-
 	tport->tp_msr = 0;
 	tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
 
@@ -585,6 +578,8 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 	tport->tp_is_open = 1;
 	++tdev->td_open_port_count;
 
+	port->port.drain_delay = 3;
+
 	goto release_lock;
 
 unlink_int_urb:
@@ -604,6 +599,7 @@ static void ti_close(struct usb_serial_port *port)
 	int port_number;
 	int status;
 	int do_unlock;
+	unsigned long flags;
 
 	tdev = usb_get_serial_data(port->serial);
 	tport = usb_get_serial_port_data(port);
@@ -612,11 +608,12 @@ static void ti_close(struct usb_serial_port *port)
 
 	tport->tp_is_open = 0;
 
-	ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 1);
-
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->write_urb);
 	tport->tp_write_urb_in_use = 0;
+	spin_lock_irqsave(&tport->tp_lock, flags);
+	kfifo_reset_out(&tport->write_fifo);
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
 
 	port_number = port->number - port->serial->minor;
 
@@ -687,6 +684,8 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
+	int ret;
+	u8 lsr;
 
 	if (tport == NULL)
 		return 0;
@@ -695,6 +694,12 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
 	chars = kfifo_len(&tport->write_fifo);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
 
+	if (!chars) {
+		ret = ti_get_lsr(tport, &lsr);
+		if (!ret && !(lsr & TI_LSR_TX_EMPTY))
+			chars = 1;
+	}
+
 	dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
 	return chars;
 }
@@ -731,38 +736,11 @@ static void ti_unthrottle(struct tty_struct *tty)
 	}
 }
 
-static int ti_get_icount(struct tty_struct *tty,
-		struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ti_port *tport = usb_get_serial_port_data(port);
-	struct async_icount cnow = tport->tp_icount;
-
-	dev_dbg(&port->dev, "%s - TIOCGICOUNT RX=%d, TX=%d\n", __func__,
-		cnow.rx, cnow.tx);
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-
-	return 0;
-}
-
 static int ti_ioctl(struct tty_struct *tty,
 	unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
-	struct async_icount cnow;
-	struct async_icount cprev;
 
 	dev_dbg(&port->dev, "%s - cmd = 0x%04X\n", __func__, cmd);
 
@@ -778,29 +756,6 @@ static int ti_ioctl(struct tty_struct *tty,
 		dev_dbg(&port->dev, "%s - TIOCSSERIAL\n", __func__);
 		return ti_set_serial_info(tty, tport,
 				(struct serial_struct __user *)arg);
-	case TIOCMIWAIT:
-		dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__);
-		cprev = tport->tp_icount;
-		while (1) {
-			interruptible_sleep_on(&port->delta_msr_wait);
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-
-			if (port->serial->disconnected)
-				return -EIO;
-
-			cnow = tport->tp_icount;
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO; /* no change => error */
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)))
-				return 0;
-			cprev = cnow;
-		}
-		break;
 	}
 	return -ENOIOCTLCMD;
 }
@@ -1018,8 +973,6 @@ static void ti_break(struct tty_struct *tty, int break_state)
 	if (tport == NULL)
 		return;
 
-	ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0);
-
 	status = ti_write_byte(port, tport->tp_tdev,
 		tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
 		TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
@@ -1156,7 +1109,7 @@ static void ti_bulk_in_callback(struct urb *urb)
 		else
 			ti_recv(port, urb->transfer_buffer, urb->actual_length);
 		spin_lock(&tport->tp_lock);
-		tport->tp_icount.rx += urb->actual_length;
+		port->icount.rx += urb->actual_length;
 		spin_unlock(&tport->tp_lock);
 	}
 
@@ -1264,7 +1217,7 @@ static void ti_send(struct ti_port *tport)
 		/* TODO: reschedule ti_send */
 	} else {
 		spin_lock_irqsave(&tport->tp_lock, flags);
-		tport->tp_icount.tx += count;
+		port->icount.tx += count;
 		spin_unlock_irqrestore(&tport->tp_lock, flags);
 	}
 
@@ -1297,7 +1250,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
 }
 
 
-static int ti_get_lsr(struct ti_port *tport)
+static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
 {
 	int size, status;
 	struct ti_device *tdev = tport->tp_tdev;
@@ -1323,7 +1276,7 @@ static int ti_get_lsr(struct ti_port *tport)
 
 	dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR);
 
-	tport->tp_lsr = data->bLSR;
+	*lsr = data->bLSR;
 
 free_data:
 	kfree(data);
@@ -1336,10 +1289,15 @@ static int ti_get_serial_info(struct ti_port *tport,
 {
 	struct usb_serial_port *port = tport->tp_port;
 	struct serial_struct ret_serial;
+	unsigned cwait;
 
 	if (!ret_arg)
 		return -EFAULT;
 
+	cwait = port->port.closing_wait;
+	if (cwait != ASYNC_CLOSING_WAIT_NONE)
+		cwait = jiffies_to_msecs(cwait) / 10;
+
 	memset(&ret_serial, 0, sizeof(ret_serial));
 
 	ret_serial.type = PORT_16550A;
@@ -1348,7 +1306,7 @@ static int ti_get_serial_info(struct ti_port *tport,
 	ret_serial.flags = tport->tp_flags;
 	ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE;
 	ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
-	ret_serial.closing_wait = tport->tp_closing_wait;
+	ret_serial.closing_wait = cwait;
 
 	if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
 		return -EFAULT;
@@ -1361,12 +1319,17 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 	struct serial_struct __user *new_arg)
 {
 	struct serial_struct new_serial;
+	unsigned cwait;
 
 	if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
 		return -EFAULT;
 
+	cwait = new_serial.closing_wait;
+	if (cwait != ASYNC_CLOSING_WAIT_NONE)
+		cwait = msecs_to_jiffies(10 * new_serial.closing_wait);
+
 	tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
-	tport->tp_closing_wait = new_serial.closing_wait;
+	tport->tp_port->port.closing_wait = cwait;
 
 	return 0;
 }
@@ -1382,7 +1345,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 
 	if (msr & TI_MSR_DELTA_MASK) {
 		spin_lock_irqsave(&tport->tp_lock, flags);
-		icount = &tport->tp_icount;
+		icount = &tport->tp_port->icount;
 		if (msr & TI_MSR_DELTA_CTS)
 			icount->cts++;
 		if (msr & TI_MSR_DELTA_DSR)
@@ -1391,7 +1354,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 			icount->dcd++;
 		if (msr & TI_MSR_DELTA_RI)
 			icount->rng++;
-		wake_up_interruptible(&tport->tp_port->delta_msr_wait);
+		wake_up_interruptible(&tport->tp_port->port.delta_msr_wait);
 		spin_unlock_irqrestore(&tport->tp_lock, flags);
 	}
 
@@ -1411,56 +1374,6 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 }
 
 
-static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush)
-{
-	struct ti_device *tdev = tport->tp_tdev;
-	struct usb_serial_port *port = tport->tp_port;
-	wait_queue_t wait;
-
-	spin_lock_irq(&tport->tp_lock);
-
-	/* wait for data to drain from the buffer */
-	tdev->td_urb_error = 0;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tport->tp_write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (kfifo_len(&tport->write_fifo) == 0
-		|| timeout == 0 || signal_pending(current)
-		|| tdev->td_urb_error
-		|| port->serial->disconnected)  /* disconnect */
-			break;
-		spin_unlock_irq(&tport->tp_lock);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irq(&tport->tp_lock);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tport->tp_write_wait, &wait);
-
-	/* flush any remaining data in the buffer */
-	if (flush)
-		kfifo_reset_out(&tport->write_fifo);
-
-	spin_unlock_irq(&tport->tp_lock);
-
-	mutex_lock(&port->serial->disc_mutex);
-	/* wait for data to drain from the device */
-	/* wait for empty tx register, plus 20 ms */
-	timeout += jiffies;
-	tport->tp_lsr &= ~TI_LSR_TX_EMPTY;
-	while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
-	&& !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error
-	&& !port->serial->disconnected) {
-		if (ti_get_lsr(tport))
-			break;
-		mutex_unlock(&port->serial->disc_mutex);
-		msleep_interruptible(20);
-		mutex_lock(&port->serial->disc_mutex);
-	}
-	mutex_unlock(&port->serial->disc_mutex);
-}
-
-
 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
 {
 	unsigned long flags;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 650be17..cf75beb 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1,6 +1,7 @@
 /*
  * USB Serial Converter driver
  *
+ * Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com)
  * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
  * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
@@ -14,7 +15,6 @@
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
- *
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -49,7 +49,6 @@
    drivers depend on it.
 */
 
-/* initially all NULL */
 static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
 static DEFINE_MUTEX(table_lock);
 static LIST_HEAD(usb_serial_driver_list);
@@ -139,7 +138,7 @@ static void destroy_serial(struct kref *kref)
 	if (serial->minor != SERIAL_TTY_NO_MINOR)
 		return_serial(serial);
 
-	if (serial->attached)
+	if (serial->attached && serial->type->release)
 		serial->type->release(serial);
 
 	/* Now that nothing is using the ports, they can be freed */
@@ -225,7 +224,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 	return retval;
 }
 
-static int serial_activate(struct tty_port *tport, struct tty_struct *tty)
+static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty)
 {
 	struct usb_serial_port *port =
 		container_of(tport, struct usb_serial_port, port);
@@ -249,30 +248,27 @@ static int serial_open(struct tty_struct *tty, struct file *filp)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
+
 	return tty_port_open(&port->port, tty, filp);
 }
 
 /**
- * serial_down - shut down hardware
+ * serial_port_shutdown - shut down hardware
  * @tport: tty port to shut down
  *
- * Shut down a USB serial port unless it is the console.  We never
- * shut down the console hardware as it will always be in use. Serialized
- * against activate by the tport mutex and kept to matching open/close pairs
+ * Shut down a USB serial port. Serialized against activate by the
+ * tport mutex and kept to matching open/close pairs
  * of calls by the ASYNCB_INITIALIZED flag.
+ *
+ * Not called if tty is console.
  */
-static void serial_down(struct tty_port *tport)
+static void serial_port_shutdown(struct tty_port *tport)
 {
 	struct usb_serial_port *port =
 		container_of(tport, struct usb_serial_port, port);
 	struct usb_serial_driver *drv = port->serial->type;
-	/*
-	 * The console is magical.  Do not hang up the console hardware
-	 * or there will be tears.
-	 */
-	if (port->port.console)
-		return;
+
 	if (drv->close)
 		drv->close(port);
 }
@@ -281,7 +277,8 @@ static void serial_hangup(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
+
 	tty_port_hangup(&port->port);
 }
 
@@ -289,7 +286,8 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
+
 	tty_port_close(&port->port, tty, filp);
 }
 
@@ -308,14 +306,14 @@ static void serial_cleanup(struct tty_struct *tty)
 	struct usb_serial *serial;
 	struct module *owner;
 
+	dev_dbg(tty->dev, "%s\n", __func__);
+
 	/* The console is magical.  Do not hang up the console hardware
 	 * or there will be tears.
 	 */
 	if (port->port.console)
 		return;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
-
 	tty->driver_data = NULL;
 
 	serial = port->serial;
@@ -339,10 +337,8 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf,
 	if (port->serial->dev->state == USB_STATE_NOTATTACHED)
 		goto exit;
 
-	dev_dbg(tty->dev, "%s - port %d, %d byte(s)\n", __func__,
-		port->number, count);
+	dev_dbg(tty->dev, "%s - %d byte(s)\n", __func__, count);
 
-	/* pass on to the driver specific version of this function */
 	retval = port->serial->type->write(tty, port, buf, count);
 	if (retval < 0)
 		retval = usb_translate_errors(retval);
@@ -354,8 +350,8 @@ static int serial_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
-	/* pass on to the driver specific version of this function */
+	dev_dbg(tty->dev, "%s\n", __func__);
+
 	return port->serial->type->write_room(tty);
 }
 
@@ -365,7 +361,7 @@ static int serial_chars_in_buffer(struct tty_struct *tty)
 	struct usb_serial *serial = port->serial;
 	int count = 0;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
 
 	mutex_lock(&serial->disc_mutex);
 	/* if the device was unplugged then any remaining characters
@@ -383,9 +379,8 @@ static void serial_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
 
-	/* pass on to the driver specific version of this function */
 	if (port->serial->type->throttle)
 		port->serial->type->throttle(tty);
 }
@@ -394,9 +389,8 @@ static void serial_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
 
-	/* pass on to the driver specific version of this function */
 	if (port->serial->type->unthrottle)
 		port->serial->type->unthrottle(tty);
 }
@@ -407,15 +401,20 @@ static int serial_ioctl(struct tty_struct *tty,
 	struct usb_serial_port *port = tty->driver_data;
 	int retval = -ENODEV;
 
-	dev_dbg(tty->dev, "%s - port %d, cmd 0x%.4x\n", __func__,
-		port->number, cmd);
+	dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd);
+
+	switch (cmd) {
+	case TIOCMIWAIT:
+		if (port->serial->type->tiocmiwait)
+			retval = port->serial->type->tiocmiwait(tty, arg);
+		break;
+	default:
+		if (port->serial->type->ioctl)
+			retval = port->serial->type->ioctl(tty, cmd, arg);
+		else
+			retval = -ENOIOCTLCMD;
+	}
 
-	/* pass on to the driver specific version of this function
-	   if it is available */
-	if (port->serial->type->ioctl) {
-		retval = port->serial->type->ioctl(tty, cmd, arg);
-	} else
-		retval = -ENOIOCTLCMD;
 	return retval;
 }
 
@@ -423,10 +422,8 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
 
-	/* pass on to the driver specific version of this function
-	   if it is available */
 	if (port->serial->type->set_termios)
 		port->serial->type->set_termios(tty, port, old);
 	else
@@ -437,12 +434,11 @@ static int serial_break(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
 
-	/* pass on to the driver specific version of this function
-	   if it is available */
 	if (port->serial->type->break_ctl)
 		port->serial->type->break_ctl(tty, break_state);
+
 	return 0;
 }
 
@@ -496,7 +492,7 @@ static int serial_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
 
 	if (port->serial->type->tiocmget)
 		return port->serial->type->tiocmget(tty);
@@ -508,7 +504,7 @@ static int serial_tiocmset(struct tty_struct *tty,
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
 
 	if (port->serial->type->tiocmset)
 		return port->serial->type->tiocmset(tty, set, clear);
@@ -520,7 +516,7 @@ static int serial_get_icount(struct tty_struct *tty,
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number);
+	dev_dbg(tty->dev, "%s\n", __func__);
 
 	if (port->serial->type->get_icount)
 		return port->serial->type->get_icount(tty, icount);
@@ -546,43 +542,39 @@ static void usb_serial_port_work(struct work_struct *work)
 	tty_port_tty_wakeup(&port->port);
 }
 
-static void kill_traffic(struct usb_serial_port *port)
+static void usb_serial_port_poison_urbs(struct usb_serial_port *port)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
-		usb_kill_urb(port->read_urbs[i]);
+		usb_poison_urb(port->read_urbs[i]);
 	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
-		usb_kill_urb(port->write_urbs[i]);
-	/*
-	 * This is tricky.
-	 * Some drivers submit the read_urb in the
-	 * handler for the write_urb or vice versa
-	 * this order determines the order in which
-	 * usb_kill_urb() must be used to reliably
-	 * kill the URBs. As it is unknown here,
-	 * both orders must be used in turn.
-	 * The call below is not redundant.
-	 */
-	usb_kill_urb(port->read_urb);
-	usb_kill_urb(port->interrupt_in_urb);
-	usb_kill_urb(port->interrupt_out_urb);
+		usb_poison_urb(port->write_urbs[i]);
+
+	usb_poison_urb(port->interrupt_in_urb);
+	usb_poison_urb(port->interrupt_out_urb);
+}
+
+static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+		usb_unpoison_urb(port->read_urbs[i]);
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+		usb_unpoison_urb(port->write_urbs[i]);
+
+	usb_unpoison_urb(port->interrupt_in_urb);
+	usb_unpoison_urb(port->interrupt_out_urb);
 }
 
-static void port_release(struct device *dev)
+static void usb_serial_port_release(struct device *dev)
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	int i;
 
 	dev_dbg(dev, "%s\n", __func__);
 
-	/*
-	 * Stop all the traffic before cancelling the work, so that
-	 * nobody will restart it by calling usb_serial_port_softint.
-	 */
-	kill_traffic(port);
-	cancel_work_sync(&port->work);
-
 	usb_free_urb(port->interrupt_in_urb);
 	usb_free_urb(port->interrupt_out_urb);
 	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
@@ -607,10 +599,8 @@ static struct usb_serial *create_serial(struct usb_device *dev,
 	struct usb_serial *serial;
 
 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
-	if (!serial) {
-		dev_err(&dev->dev, "%s - out of memory\n", __func__);
+	if (!serial)
 		return NULL;
-	}
 	serial->dev = usb_get_dev(dev);
 	serial->type = driver;
 	serial->interface = usb_get_intf(interface);
@@ -673,7 +663,7 @@ static struct usb_serial_driver *search_serial_device(
 	return NULL;
 }
 
-static int serial_carrier_raised(struct tty_port *port)
+static int serial_port_carrier_raised(struct tty_port *port)
 {
 	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
 	struct usb_serial_driver *drv = p->serial->type;
@@ -684,7 +674,7 @@ static int serial_carrier_raised(struct tty_port *port)
 	return 1;
 }
 
-static void serial_dtr_rts(struct tty_port *port, int on)
+static void serial_port_dtr_rts(struct tty_port *port, int on)
 {
 	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
 	struct usb_serial *serial = p->serial;
@@ -704,10 +694,10 @@ static void serial_dtr_rts(struct tty_port *port, int on)
 }
 
 static const struct tty_port_operations serial_port_ops = {
-	.carrier_raised = serial_carrier_raised,
-	.dtr_rts = serial_dtr_rts,
-	.activate = serial_activate,
-	.shutdown = serial_down,
+	.carrier_raised		= serial_port_carrier_raised,
+	.dtr_rts		= serial_port_dtr_rts,
+	.activate		= serial_port_activate,
+	.shutdown		= serial_port_shutdown,
 };
 
 static int usb_serial_probe(struct usb_interface *interface,
@@ -754,7 +744,6 @@ static int usb_serial_probe(struct usb_interface *interface,
 	serial = create_serial(dev, interface, type);
 	if (!serial) {
 		module_put(type->driver.owner);
-		dev_err(ddev, "%s - out of memory\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -895,7 +884,6 @@ static int usb_serial_probe(struct usb_interface *interface,
 		port->port.ops = &serial_port_ops;
 		port->serial = serial;
 		spin_lock_init(&port->lock);
-		init_waitqueue_head(&port->delta_msr_wait);
 		/* Keep this for private driver use for the moment but
 		   should probably go away */
 		INIT_WORK(&port->work, usb_serial_port_work);
@@ -903,7 +891,7 @@ static int usb_serial_probe(struct usb_interface *interface,
 		port->dev.parent = &interface->dev;
 		port->dev.driver = NULL;
 		port->dev.bus = &usb_serial_bus_type;
-		port->dev.release = &port_release;
+		port->dev.release = &usb_serial_port_release;
 		device_initialize(&port->dev);
 	}
 
@@ -919,16 +907,12 @@ static int usb_serial_probe(struct usb_interface *interface,
 		for (j = 0; j < ARRAY_SIZE(port->read_urbs); ++j) {
 			set_bit(j, &port->read_urbs_free);
 			port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
-			if (!port->read_urbs[j]) {
-				dev_err(ddev, "No free urbs available\n");
+			if (!port->read_urbs[j])
 				goto probe_error;
-			}
 			port->bulk_in_buffers[j] = kmalloc(buffer_size,
 								GFP_KERNEL);
-			if (!port->bulk_in_buffers[j]) {
-				dev_err(ddev, "Couldn't allocate bulk_in_buffer\n");
+			if (!port->bulk_in_buffers[j])
 				goto probe_error;
-			}
 			usb_fill_bulk_urb(port->read_urbs[j], dev,
 					usb_rcvbulkpipe(dev,
 						endpoint->bEndpointAddress),
@@ -955,16 +939,12 @@ static int usb_serial_probe(struct usb_interface *interface,
 		for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
 			set_bit(j, &port->write_urbs_free);
 			port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
-			if (!port->write_urbs[j]) {
-				dev_err(ddev, "No free urbs available\n");
+			if (!port->write_urbs[j])
 				goto probe_error;
-			}
 			port->bulk_out_buffers[j] = kmalloc(buffer_size,
 								GFP_KERNEL);
-			if (!port->bulk_out_buffers[j]) {
-				dev_err(ddev, "Couldn't allocate bulk_out_buffer\n");
+			if (!port->bulk_out_buffers[j])
 				goto probe_error;
-			}
 			usb_fill_bulk_urb(port->write_urbs[j], dev,
 					usb_sndbulkpipe(dev,
 						endpoint->bEndpointAddress),
@@ -982,19 +962,15 @@ static int usb_serial_probe(struct usb_interface *interface,
 			endpoint = interrupt_in_endpoint[i];
 			port = serial->port[i];
 			port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
-			if (!port->interrupt_in_urb) {
-				dev_err(ddev, "No free urbs available\n");
+			if (!port->interrupt_in_urb)
 				goto probe_error;
-			}
 			buffer_size = usb_endpoint_maxp(endpoint);
 			port->interrupt_in_endpointAddress =
 						endpoint->bEndpointAddress;
 			port->interrupt_in_buffer = kmalloc(buffer_size,
 								GFP_KERNEL);
-			if (!port->interrupt_in_buffer) {
-				dev_err(ddev, "Couldn't allocate interrupt_in_buffer\n");
+			if (!port->interrupt_in_buffer)
 				goto probe_error;
-			}
 			usb_fill_int_urb(port->interrupt_in_urb, dev,
 				usb_rcvintpipe(dev,
 						endpoint->bEndpointAddress),
@@ -1011,20 +987,16 @@ static int usb_serial_probe(struct usb_interface *interface,
 			endpoint = interrupt_out_endpoint[i];
 			port = serial->port[i];
 			port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
-			if (!port->interrupt_out_urb) {
-				dev_err(ddev, "No free urbs available\n");
+			if (!port->interrupt_out_urb)
 				goto probe_error;
-			}
 			buffer_size = usb_endpoint_maxp(endpoint);
 			port->interrupt_out_size = buffer_size;
 			port->interrupt_out_endpointAddress =
 						endpoint->bEndpointAddress;
 			port->interrupt_out_buffer = kmalloc(buffer_size,
 								GFP_KERNEL);
-			if (!port->interrupt_out_buffer) {
-				dev_err(ddev, "Couldn't allocate interrupt_out_buffer\n");
+			if (!port->interrupt_out_buffer)
 				goto probe_error;
-			}
 			usb_fill_int_urb(port->interrupt_out_urb, dev,
 				usb_sndintpipe(dev,
 						  endpoint->bEndpointAddress),
@@ -1113,13 +1085,15 @@ static void usb_serial_disconnect(struct usb_interface *interface)
 				tty_vhangup(tty);
 				tty_kref_put(tty);
 			}
-			kill_traffic(port);
+			usb_serial_port_poison_urbs(port);
+			wake_up_interruptible(&port->port.delta_msr_wait);
 			cancel_work_sync(&port->work);
 			if (device_is_registered(&port->dev))
 				device_del(&port->dev);
 		}
 	}
-	serial->type->disconnect(serial);
+	if (serial->type->disconnect)
+		serial->type->disconnect(serial);
 
 	/* let the last holder of this object cause it to be cleaned up */
 	usb_serial_put(serial);
@@ -1134,6 +1108,11 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
 
 	serial->suspending = 1;
 
+	/*
+	 * serial->type->suspend() MUST return 0 in system sleep context,
+	 * otherwise, the resume callback has to recover device from
+	 * previous suspend failure.
+	 */
 	if (serial->type->suspend) {
 		r = serial->type->suspend(serial, message);
 		if (r < 0) {
@@ -1145,7 +1124,7 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (port)
-			kill_traffic(port);
+			usb_serial_port_poison_urbs(port);
 	}
 
 err_out:
@@ -1153,11 +1132,25 @@ err_out:
 }
 EXPORT_SYMBOL(usb_serial_suspend);
 
+static void usb_serial_unpoison_port_urbs(struct usb_serial *serial)
+{
+	struct usb_serial_port *port;
+	int i;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		if (port)
+			usb_serial_port_unpoison_urbs(port);
+	}
+}
+
 int usb_serial_resume(struct usb_interface *intf)
 {
 	struct usb_serial *serial = usb_get_intfdata(intf);
 	int rv;
 
+	usb_serial_unpoison_port_urbs(serial);
+
 	serial->suspending = 0;
 	if (serial->type->resume)
 		rv = serial->type->resume(serial);
@@ -1173,6 +1166,8 @@ static int usb_serial_reset_resume(struct usb_interface *intf)
 	struct usb_serial *serial = usb_get_intfdata(intf);
 	int rv;
 
+	usb_serial_unpoison_port_urbs(serial);
+
 	serial->suspending = 0;
 	if (serial->type->reset_resume)
 		rv = serial->type->reset_resume(serial);
@@ -1309,12 +1304,12 @@ module_exit(usb_serial_exit);
 	do {								\
 		if (!type->function) {					\
 			type->function = usb_serial_generic_##function;	\
-			pr_debug("Had to override the " #function	\
-				" usb serial operation with the generic one.");\
-			}						\
+			pr_debug("%s: using generic " #function	"\n",	\
+						type->driver.name);	\
+		}							\
 	} while (0)
 
-static void fixup_generic(struct usb_serial_driver *device)
+static void usb_serial_operations_init(struct usb_serial_driver *device)
 {
 	set_to_generic_if_null(device, open);
 	set_to_generic_if_null(device, write);
@@ -1323,8 +1318,6 @@ static void fixup_generic(struct usb_serial_driver *device)
 	set_to_generic_if_null(device, chars_in_buffer);
 	set_to_generic_if_null(device, read_bulk_callback);
 	set_to_generic_if_null(device, write_bulk_callback);
-	set_to_generic_if_null(device, disconnect);
-	set_to_generic_if_null(device, release);
 	set_to_generic_if_null(device, process_read_urb);
 	set_to_generic_if_null(device, prepare_write_buffer);
 }
@@ -1336,8 +1329,6 @@ static int usb_serial_register(struct usb_serial_driver *driver)
 	if (usb_disabled())
 		return -ENODEV;
 
-	fixup_generic(driver);
-
 	if (!driver->description)
 		driver->description = driver->driver.name;
 	if (!driver->usb_driver) {
@@ -1346,6 +1337,8 @@ static int usb_serial_register(struct usb_serial_driver *driver)
 		return -EINVAL;
 	}
 
+	usb_serial_operations_init(driver);
+
 	/* Add this device to our list of devices */
 	mutex_lock(&table_lock);
 	list_add(&driver->driver_list, &usb_serial_driver_list);
@@ -1463,7 +1456,6 @@ void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_driver
 }
 EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
 
-/* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 571965a..ece326e 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -421,20 +421,19 @@ void usb_wwan_close(struct usb_serial_port *port)
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (serial->dev) {
-		/* Stop reading/writing urbs */
-		spin_lock_irq(&intfdata->susp_lock);
-		portdata->opened = 0;
-		spin_unlock_irq(&intfdata->susp_lock);
+	/* Stop reading/writing urbs */
+	spin_lock_irq(&intfdata->susp_lock);
+	portdata->opened = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
 
-		for (i = 0; i < N_IN_URB; i++)
-			usb_kill_urb(portdata->in_urbs[i]);
-		for (i = 0; i < N_OUT_URB; i++)
-			usb_kill_urb(portdata->out_urbs[i]);
-		/* balancing - important as an error cannot be handled*/
-		usb_autopm_get_interface_no_resume(serial->interface);
-		serial->interface->needs_remote_wakeup = 0;
-	}
+	for (i = 0; i < N_IN_URB; i++)
+		usb_kill_urb(portdata->in_urbs[i]);
+	for (i = 0; i < N_OUT_URB; i++)
+		usb_kill_urb(portdata->out_urbs[i]);
+
+	/* balancing - important as an error cannot be handled*/
+	usb_autopm_get_interface_no_resume(serial->interface);
+	serial->interface->needs_remote_wakeup = 0;
 }
 EXPORT_SYMBOL(usb_wwan_close);
 
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 1129aa7..7573ec8 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -257,24 +257,18 @@ static void visor_close(struct usb_serial_port *port)
 {
 	unsigned char *transfer_buffer;
 
-	/* shutdown our urbs */
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 
-	mutex_lock(&port->serial->disc_mutex);
-	if (!port->serial->disconnected) {
-		/* Try to send shutdown message, unless the device is gone */
-		transfer_buffer =  kmalloc(0x12, GFP_KERNEL);
-		if (transfer_buffer) {
-			usb_control_msg(port->serial->dev,
+	transfer_buffer = kmalloc(0x12, GFP_KERNEL);
+	if (!transfer_buffer)
+		return;
+	usb_control_msg(port->serial->dev,
 					 usb_rcvctrlpipe(port->serial->dev, 0),
 					 VISOR_CLOSE_NOTIFICATION, 0xc2,
 					 0x0000, 0x0000,
 					 transfer_buffer, 0x12, 300);
-			kfree(transfer_buffer);
-		}
-	}
-	mutex_unlock(&port->serial->disc_mutex);
+	kfree(transfer_buffer);
 }
 
 static void visor_read_int_callback(struct urb *urb)
diff --git a/drivers/usb/serial/wishbone-serial.c b/drivers/usb/serial/wishbone-serial.c
new file mode 100644
index 0000000..100573c
--- /dev/null
+++ b/drivers/usb/serial/wishbone-serial.c
@@ -0,0 +1,95 @@
+/*
+ * USB Wishbone-Serial adapter driver
+ *
+ * Copyright (C) 2013 Wesley W. Terpstra <w.terpstra@gsi.de>
+ * Copyright (C) 2013 GSI Helmholtz Centre for Heavy Ion Research GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+#define GSI_VENDOR_OPENCLOSE 0xB0
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1D50, 0x6062, 0xFF, 0xFF, 0xFF) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/*
+ * Etherbone must be told that a new stream has begun before data arrives.
+ * This is necessary to restart the negotiation of Wishbone bus parameters.
+ * Similarly, when the stream ends, Etherbone must be told so that the cycle
+ * line can be driven low in the case that userspace failed to do so.
+ */
+static int usb_gsi_openclose(struct usb_serial_port *port, int value)
+{
+	struct usb_device *dev = port->serial->dev;
+
+	return usb_control_msg(
+		dev,
+		usb_sndctrlpipe(dev, 0), /* Send to EP0OUT */
+		GSI_VENDOR_OPENCLOSE,
+		USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+		value, /* wValue = device is open(1) or closed(0) */
+		port->serial->interface->cur_altsetting->desc.bInterfaceNumber,
+		NULL, 0,  /* There is no data stage */
+		5000); /* Timeout till operation fails */
+}
+
+static int wishbone_serial_open(struct tty_struct *tty,
+				struct usb_serial_port *port)
+{
+	int retval;
+
+	retval = usb_gsi_openclose(port, 1);
+	if (retval) {
+		dev_err(&port->serial->dev->dev,
+		       "Could not mark device as open (%d)\n",
+		       retval);
+		return retval;
+	}
+
+	retval = usb_serial_generic_open(tty, port);
+	if (retval)
+		usb_gsi_openclose(port, 0);
+
+	return retval;
+}
+
+static void wishbone_serial_close(struct usb_serial_port *port)
+{
+	usb_serial_generic_close(port);
+	usb_gsi_openclose(port, 0);
+}
+
+static struct usb_serial_driver wishbone_serial_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"wishbone_serial",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+	.open =			&wishbone_serial_open,
+	.close =		&wishbone_serial_close,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&wishbone_serial_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR("Wesley W. Terpstra <w.terpstra@gsi.de>");
+MODULE_DESCRIPTION("USB Wishbone-Serial adapter");
+MODULE_LICENSE("GPL");