diff options
author | Kishon Vijay Abraham I <kishon@ti.com> | 2014-03-06 14:38:37 (GMT) |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2014-03-09 07:15:08 (GMT) |
commit | 14da699bc04212559d5dda19d3f07c807fb58dfd (patch) | |
tree | da70074191e90be6fef4ac02bff16dde3ce45721 /drivers/usb | |
parent | db68e80f080a21b295f2262976520c40bc505f9d (diff) | |
download | linux-14da699bc04212559d5dda19d3f07c807fb58dfd.tar.xz |
phy: rename struct omap_control_usb to struct omap_control_phy
Rename struct omap_control_usb to struct omap_control_phy since it can
be used to control PHY of USB, SATA and PCIE. Also move the driver and
include files under *phy* and made the corresponding changes in the users
of phy-omap-control.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/musb/omap2430.c | 2 | ||||
-rw-r--r-- | drivers/usb/phy/Kconfig | 10 | ||||
-rw-r--r-- | drivers/usb/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/phy/phy-omap-control.c | 319 |
4 files changed, 1 insertions, 331 deletions
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 8aa59a2..d341c14 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -37,7 +37,7 @@ #include <linux/err.h> #include <linux/delay.h> #include <linux/usb/musb-omap.h> -#include <linux/usb/omap_control_usb.h> +#include <linux/phy/omap_control_phy.h> #include <linux/of_platform.h> #include "musb_core.h" diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index c337ba2..416e0c8 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -75,16 +75,6 @@ config NOP_USB_XCEIV built-in with usb ip or which are autonomous and doesn't require any phy programming such as ISP1x04 etc. -config OMAP_CONTROL_USB - tristate "OMAP CONTROL USB Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - help - Enable this to add support for the USB part present in the control - module. This driver has API to power on the USB2 PHY and to write to - the mailbox. The mailbox is present only in omap4 and the register to - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an - additional register to power on USB3 PHY. - config AM335X_CONTROL_USB tristate diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 15f1878..f8fa719 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o -obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c deleted file mode 100644 index e725318..0000000 --- a/drivers/usb/phy/phy-omap-control.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * omap-control-usb.c - The USB part of control module. - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I <kishon@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/usb/omap_control_usb.h> - -/** - * omap_control_usb_phy_power - power on/off the phy using control module reg - * @dev: the control module device - * @on: 0 or 1, based on powering on or off the PHY - */ -void omap_control_usb_phy_power(struct device *dev, int on) -{ - u32 val; - unsigned long rate; - struct omap_control_usb *control_usb; - - if (IS_ERR(dev) || !dev) { - pr_err("%s: invalid device\n", __func__); - return; - } - - control_usb = dev_get_drvdata(dev); - if (!control_usb) { - dev_err(dev, "%s: invalid control usb device\n", __func__); - return; - } - - if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) - return; - - val = readl(control_usb->power); - - switch (control_usb->type) { - case OMAP_CTRL_TYPE_USB2: - if (on) - val &= ~OMAP_CTRL_DEV_PHY_PD; - else - val |= OMAP_CTRL_DEV_PHY_PD; - break; - - case OMAP_CTRL_TYPE_PIPE3: - rate = clk_get_rate(control_usb->sys_clk); - rate = rate/1000000; - - if (on) { - val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; - val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; - } else { - val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; - } - break; - - case OMAP_CTRL_TYPE_DRA7USB2: - if (on) - val &= ~OMAP_CTRL_USB2_PHY_PD; - else - val |= OMAP_CTRL_USB2_PHY_PD; - break; - - case OMAP_CTRL_TYPE_AM437USB2: - if (on) { - val &= ~(AM437X_CTRL_USB2_PHY_PD | - AM437X_CTRL_USB2_OTG_PD); - val |= (AM437X_CTRL_USB2_OTGVDET_EN | - AM437X_CTRL_USB2_OTGSESSEND_EN); - } else { - val &= ~(AM437X_CTRL_USB2_OTGVDET_EN | - AM437X_CTRL_USB2_OTGSESSEND_EN); - val |= (AM437X_CTRL_USB2_PHY_PD | - AM437X_CTRL_USB2_OTG_PD); - } - break; - default: - dev_err(dev, "%s: type %d not recognized\n", - __func__, control_usb->type); - break; - } - - writel(val, control_usb->power); -} -EXPORT_SYMBOL_GPL(omap_control_usb_phy_power); - -/** - * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded - * @ctrl_usb: struct omap_control_usb * - * - * Writes to the mailbox register to notify the usb core that a usb - * device has been connected. - */ -static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb) -{ - u32 val; - - val = readl(ctrl_usb->otghs_control); - val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); - val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; - writel(val, ctrl_usb->otghs_control); -} - -/** - * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high - * impedance - * @ctrl_usb: struct omap_control_usb * - * - * Writes to the mailbox register to notify the usb core that it has been - * connected to a usb host. - */ -static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb) -{ - u32 val; - - val = readl(ctrl_usb->otghs_control); - val &= ~OMAP_CTRL_DEV_SESSEND; - val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | - OMAP_CTRL_DEV_VBUSVALID; - writel(val, ctrl_usb->otghs_control); -} - -/** - * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high - * impedance - * @ctrl_usb: struct omap_control_usb * - * - * Writes to the mailbox register to notify the usb core it's now in - * disconnected state. - */ -static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) -{ - u32 val; - - val = readl(ctrl_usb->otghs_control); - val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); - val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; - writel(val, ctrl_usb->otghs_control); -} - -/** - * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode - * or device mode or to denote disconnected state - * @dev: the control module device - * @mode: The mode to which usb should be configured - * - * This is an API to write to the mailbox register to notify the usb core that - * a usb device has been connected. - */ -void omap_control_usb_set_mode(struct device *dev, - enum omap_control_usb_mode mode) -{ - struct omap_control_usb *ctrl_usb; - - if (IS_ERR(dev) || !dev) - return; - - ctrl_usb = dev_get_drvdata(dev); - - if (!ctrl_usb) { - dev_err(dev, "Invalid control usb device\n"); - return; - } - - if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS) - return; - - switch (mode) { - case USB_MODE_HOST: - omap_control_usb_host_mode(ctrl_usb); - break; - case USB_MODE_DEVICE: - omap_control_usb_device_mode(ctrl_usb); - break; - case USB_MODE_DISCONNECT: - omap_control_usb_set_sessionend(ctrl_usb); - break; - default: - dev_vdbg(dev, "invalid omap control usb mode\n"); - } -} -EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); - -#ifdef CONFIG_OF - -static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS; -static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2; -static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; -static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; -static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2; - -static const struct of_device_id omap_control_usb_id_table[] = { - { - .compatible = "ti,control-phy-otghs", - .data = &otghs_data, - }, - { - .compatible = "ti,control-phy-usb2", - .data = &usb2_data, - }, - { - .compatible = "ti,control-phy-pipe3", - .data = &pipe3_data, - }, - { - .compatible = "ti,control-phy-dra7usb2", - .data = &dra7usb2_data, - }, - { - .compatible = "ti,control-phy-am437usb2", - .data = &am437usb2_data, - }, - {}, -}; -MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); -#endif - - -static int omap_control_usb_probe(struct platform_device *pdev) -{ - struct resource *res; - const struct of_device_id *of_id; - struct omap_control_usb *control_usb; - - of_id = of_match_device(of_match_ptr(omap_control_usb_id_table), - &pdev->dev); - if (!of_id) - return -EINVAL; - - control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb), - GFP_KERNEL); - if (!control_usb) { - dev_err(&pdev->dev, "unable to alloc memory for control usb\n"); - return -ENOMEM; - } - - control_usb->dev = &pdev->dev; - control_usb->type = *(enum omap_control_usb_type *)of_id->data; - - if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "otghs_control"); - control_usb->otghs_control = devm_ioremap_resource( - &pdev->dev, res); - if (IS_ERR(control_usb->otghs_control)) - return PTR_ERR(control_usb->otghs_control); - } else { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "power"); - control_usb->power = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(control_usb->power)) { - dev_err(&pdev->dev, "Couldn't get power register\n"); - return PTR_ERR(control_usb->power); - } - } - - if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) { - control_usb->sys_clk = devm_clk_get(control_usb->dev, - "sys_clkin"); - if (IS_ERR(control_usb->sys_clk)) { - pr_err("%s: unable to get sys_clkin\n", __func__); - return -EINVAL; - } - } - - dev_set_drvdata(control_usb->dev, control_usb); - - return 0; -} - -static struct platform_driver omap_control_usb_driver = { - .probe = omap_control_usb_probe, - .driver = { - .name = "omap-control-usb", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(omap_control_usb_id_table), - }, -}; - -static int __init omap_control_usb_init(void) -{ - return platform_driver_register(&omap_control_usb_driver); -} -subsys_initcall(omap_control_usb_init); - -static void __exit omap_control_usb_exit(void) -{ - platform_driver_unregister(&omap_control_usb_driver); -} -module_exit(omap_control_usb_exit); - -MODULE_ALIAS("platform: omap_control_usb"); -MODULE_AUTHOR("Texas Instruments Inc."); -MODULE_DESCRIPTION("OMAP Control Module USB Driver"); -MODULE_LICENSE("GPL v2"); |