Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input.git manually

Some manual fixups required due to clashes with the PF_FREEZE cleanups.

21 files changed, 1231 insertions, 779 deletions

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index a61d443..a708a1d 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_USB_MOUSE)		+= input/
 obj-$(CONFIG_USB_MTOUCH)	+= input/
 obj-$(CONFIG_USB_POWERMATE)	+= input/
 obj-$(CONFIG_USB_WACOM)		+= input/
+obj-$(CONFIG_USB_ACECAD)	+= input/
 obj-$(CONFIG_USB_XPAD)		+= input/
 
 obj-$(CONFIG_USB_DABUSB)	+= media/
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index d28e7ea..fd59f6b 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -151,6 +151,18 @@ config USB_WACOM
 	  To compile this driver as a module, choose M here: the
 	  module will be called wacom.
 
+config USB_ACECAD
+	tristate "Acecad Flair tablet support"
+	depends on USB && INPUT
+	help
+	  Say Y here if you want to use the USB version of the Acecad Flair
+	  tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acecad.
+
 config USB_KBTAB
 	tristate "KB Gear JamStudio tablet support"
 	depends on USB && INPUT
@@ -190,6 +202,18 @@ config USB_MTOUCH
 	  To compile this driver as a module, choose M here: the
 	  module will be called mtouchusb.
 
+config USB_ITMTOUCH
+	tristate "ITM Touch USB Touchscreen Driver"
+	depends on USB && INPUT
+	---help---
+	  Say Y here if you want to use a ITM Touch USB
+	  Touchscreen controller.
+
+	  This touchscreen is used in LG 1510SF monitors.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called itmtouch.
+
 config USB_EGALAX
 	tristate "eGalax TouchKit USB Touchscreen Driver"
 	depends on USB && INPUT
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index 6bcedd1..831b2b0 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -33,7 +33,9 @@ obj-$(CONFIG_USB_KBD)		+= usbkbd.o
 obj-$(CONFIG_USB_KBTAB)		+= kbtab.o
 obj-$(CONFIG_USB_MOUSE)		+= usbmouse.o
 obj-$(CONFIG_USB_MTOUCH)	+= mtouchusb.o
+obj-$(CONFIG_USB_ITMTOUCH)	+= itmtouch.o
 obj-$(CONFIG_USB_EGALAX)	+= touchkitusb.o
 obj-$(CONFIG_USB_POWERMATE)	+= powermate.o
 obj-$(CONFIG_USB_WACOM)		+= wacom.o
+obj-$(CONFIG_USB_ACECAD)	+= acecad.o
 obj-$(CONFIG_USB_XPAD)		+= xpad.o
diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c
new file mode 100644
index 0000000..ebcf7c9
--- /dev/null
+++ b/drivers/usb/input/acecad.c
@@ -0,0 +1,285 @@
+/*
+ *  Copyright (c) 2001-2005 Edouard TISSERANT   <edouard.tisserant@wanadoo.fr>
+ *  Copyright (c) 2004-2005 Stephane VOLTZ      <svoltz@numericable.fr>
+ *
+ *  USB Acecad "Acecad Flair" tablet support
+ *
+ *  Changelog:
+ *      v3.2 - Added sysfs support
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v3.2"
+#define DRIVER_DESC    "USB Acecad Flair tablet driver"
+#define DRIVER_LICENSE "GPL"
+#define DRIVER_AUTHOR  "Edouard TISSERANT <edouard.tisserant@wanadoo.fr>"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_ACECAD	0x0460
+#define USB_DEVICE_ID_FLAIR	0x0004
+#define USB_DEVICE_ID_302	0x0008
+
+struct usb_acecad {
+	char name[128];
+	char phys[64];
+	struct usb_device *usbdev;
+	struct input_dev dev;
+	struct urb *irq;
+
+	signed char *data;
+	dma_addr_t data_dma;
+};
+
+static void usb_acecad_irq(struct urb *urb, struct pt_regs *regs)
+{
+	struct usb_acecad *acecad = urb->context;
+	unsigned char *data = acecad->data;
+	struct input_dev *dev = &acecad->dev;
+	int prox, status;
+
+	switch (urb->status) {
+		case 0:
+			/* success */
+			break;
+		case -ECONNRESET:
+		case -ENOENT:
+		case -ESHUTDOWN:
+			/* this urb is terminated, clean up */
+			dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+			return;
+		default:
+			dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+			goto resubmit;
+	}
+
+	prox = (data[0] & 0x04) >> 2;
+	input_report_key(dev, BTN_TOOL_PEN, prox);
+
+	if (prox) {
+		int x = data[1] | (data[2] << 8);
+		int y = data[3] | (data[4] << 8);
+		/*Pressure should compute the same way for flair and 302*/
+		int pressure = data[5] | ((int)data[6] << 8);
+		int touch = data[0] & 0x01;
+		int stylus = (data[0] & 0x10) >> 4;
+		int stylus2 = (data[0] & 0x20) >> 5;
+		input_report_abs(dev, ABS_X, x);
+		input_report_abs(dev, ABS_Y, y);
+		input_report_abs(dev, ABS_PRESSURE, pressure);
+		input_report_key(dev, BTN_TOUCH, touch);
+		input_report_key(dev, BTN_STYLUS, stylus);
+		input_report_key(dev, BTN_STYLUS2, stylus2);
+	}
+
+	/* event termination */
+	input_sync(dev);
+
+resubmit:
+	status = usb_submit_urb (urb, GFP_ATOMIC);
+	if (status)
+		err ("can't resubmit intr, %s-%s/input0, status %d",
+			acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status);
+}
+
+static int usb_acecad_open(struct input_dev *dev)
+{
+	struct usb_acecad *acecad = dev->private;
+
+	acecad->irq->dev = acecad->usbdev;
+	if (usb_submit_urb(acecad->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void usb_acecad_close(struct input_dev *dev)
+{
+	struct usb_acecad *acecad = dev->private;
+
+	usb_kill_urb(acecad->irq);
+}
+
+static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_host_interface *interface = intf->cur_altsetting;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_acecad *acecad;
+	int pipe, maxp;
+	char path[64];
+
+	if (interface->desc.bNumEndpoints != 1)
+		return -ENODEV;
+
+	endpoint = &interface->endpoint[0].desc;
+
+	if (!(endpoint->bEndpointAddress & 0x80))
+		return -ENODEV;
+
+	if ((endpoint->bmAttributes & 3) != 3)
+		return -ENODEV;
+
+	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+	acecad = kcalloc(1, sizeof(struct usb_acecad), GFP_KERNEL);
+	if (!acecad)
+		return -ENOMEM;
+
+	acecad->data = usb_buffer_alloc(dev, 8, SLAB_KERNEL, &acecad->data_dma);
+	if (!acecad->data)
+		goto fail1;
+
+	acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!acecad->irq)
+		goto fail2;
+
+	if (dev->manufacturer)
+		strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
+
+	if (dev->product) {
+		if (dev->manufacturer)
+			strlcat(acecad->name, " ", sizeof(acecad->name));
+		strlcat(acecad->name, dev->product, sizeof(acecad->name));
+	}
+
+	usb_make_path(dev, path, sizeof(path));
+	snprintf(acecad->phys, sizeof(acecad->phys), "%s/input0", path);
+
+	acecad->usbdev = dev;
+
+	acecad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	acecad->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+	acecad->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+	acecad->dev.keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2);
+
+	switch (id->driver_info) {
+		case 0:
+			acecad->dev.absmax[ABS_X] = 5000;
+			acecad->dev.absmax[ABS_Y] = 3750;
+			acecad->dev.absmax[ABS_PRESSURE] = 512;
+			if (!strlen(acecad->name))
+				snprintf(acecad->name, sizeof(acecad->name),
+					"USB Acecad Flair Tablet %04x:%04x",
+					dev->descriptor.idVendor, dev->descriptor.idProduct);
+			break;
+		case 1:
+			acecad->dev.absmax[ABS_X] = 3000;
+			acecad->dev.absmax[ABS_Y] = 2250;
+			acecad->dev.absmax[ABS_PRESSURE] = 1024;
+			if (!strlen(acecad->name))
+				snprintf(acecad->name, sizeof(acecad->name),
+					"USB Acecad 302 Tablet %04x:%04x",
+					dev->descriptor.idVendor, dev->descriptor.idProduct);
+			break;
+	}
+
+	acecad->dev.absfuzz[ABS_X] = 4;
+	acecad->dev.absfuzz[ABS_Y] = 4;
+
+	acecad->dev.private = acecad;
+	acecad->dev.open = usb_acecad_open;
+	acecad->dev.close = usb_acecad_close;
+
+	acecad->dev.name = acecad->name;
+	acecad->dev.phys = acecad->phys;
+	acecad->dev.id.bustype = BUS_USB;
+	acecad->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
+	acecad->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
+	acecad->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	acecad->dev.dev = &intf->dev;
+
+	usb_fill_int_urb(acecad->irq, dev, pipe,
+			acecad->data, maxp > 8 ? 8 : maxp,
+			usb_acecad_irq, acecad, endpoint->bInterval);
+	acecad->irq->transfer_dma = acecad->data_dma;
+	acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	input_register_device(&acecad->dev);
+
+	printk(KERN_INFO "input: %s with packet size %d on %s\n",
+		acecad->name, maxp, path);
+
+	usb_set_intfdata(intf, acecad);
+
+	return 0;
+
+ fail2:	usb_buffer_free(dev, 8, acecad->data, acecad->data_dma);
+ fail1:	kfree(acecad);
+	return -ENOMEM;
+}
+
+static void usb_acecad_disconnect(struct usb_interface *intf)
+{
+	struct usb_acecad *acecad = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (acecad) {
+		usb_kill_urb(acecad->irq);
+		input_unregister_device(&acecad->dev);
+		usb_free_urb(acecad->irq);
+		usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma);
+		kfree(acecad);
+	}
+}
+
+static struct usb_device_id usb_acecad_id_table [] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
+	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302),	 .driver_info = 1 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
+
+static struct usb_driver usb_acecad_driver = {
+	.owner =	THIS_MODULE,
+	.name =		"usb_acecad",
+	.probe =	usb_acecad_probe,
+	.disconnect =	usb_acecad_disconnect,
+	.id_table =	usb_acecad_id_table,
+};
+
+static int __init usb_acecad_init(void)
+{
+	int result = usb_register(&usb_acecad_driver);
+	if (result == 0)
+		info(DRIVER_VERSION ":" DRIVER_DESC);
+	return result;
+}
+
+static void __exit usb_acecad_exit(void)
+{
+	usb_deregister(&usb_acecad_driver);
+}
+
+module_init(usb_acecad_init);
+module_exit(usb_acecad_exit);
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index e991f7e..6bb0f25 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -1,7 +1,7 @@
 /*
  *  Native support for the Aiptek HyperPen USB Tablets
  *  (4000U/5000U/6000U/8000U/12000U)
- *  
+ *
  *  Copyright (c) 2001      Chris Atenasio   <chris@crud.net>
  *  Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net>
  *
@@ -31,7 +31,7 @@
  *           - Added support for the sysfs interface, deprecating the
  *             procfs interface for 2.5.x kernel. Also added support for
  *             Wheel command. Bryan W. Headley July-15-2003.
- *      v1.2 - Reworked jitter timer as a kernel thread. 
+ *      v1.2 - Reworked jitter timer as a kernel thread.
  *             Bryan W. Headley November-28-2003/Jan-10-2004.
  *      v1.3 - Repaired issue of kernel thread going nuts on single-processor
  *             machines, introduced programmableDelay as a command line
@@ -49,10 +49,10 @@
  * NOTE:
  *      This kernel driver is augmented by the "Aiptek" XFree86 input
  *      driver for your X server, as well as the Gaiptek GUI Front-end
- *      "Tablet Manager". 
- *      These three products are highly interactive with one another, 
+ *      "Tablet Manager".
+ *      These three products are highly interactive with one another,
  *      so therefore it's easier to document them all as one subsystem.
- *      Please visit the project's "home page", located at, 
+ *      Please visit the project's "home page", located at,
  *      http://aiptektablet.sourceforge.net.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -156,7 +156,7 @@
  * Command/Data    Description     Return Bytes    Return Value
  * 0x10/0x00       SwitchToMouse       0
  * 0x10/0x01       SwitchToTablet      0
- * 0x18/0x04       SetResolution       0 
+ * 0x18/0x04       SetResolution       0
  * 0x12/0xFF       AutoGainOn          0
  * 0x17/0x00       FilterOn            0
  * 0x01/0x00       GetXExtension       2           MaxX
@@ -247,7 +247,7 @@
 #define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE	2
 #define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED		3
 
-	/* Time to wait (in ms) to help mask hand jittering 
+	/* Time to wait (in ms) to help mask hand jittering
 	 * when pressing the stylus buttons.
 	 */
 #define AIPTEK_JITTER_DELAY_DEFAULT			50
@@ -324,7 +324,6 @@ struct aiptek {
 	struct aiptek_settings curSetting;	/* tablet's current programmable */
 	struct aiptek_settings newSetting;	/* ... and new param settings    */
 	unsigned int ifnum;			/* interface number for IO       */
-	int openCount;				/* module use counter            */
 	int diagnostic;				/* tablet diagnostic codes       */
 	unsigned long eventCount;		/* event count                   */
 	int inDelay;				/* jitter: in jitter delay?      */
@@ -791,7 +790,7 @@ exit:
  * specific Aiptek model numbers, because there has been overlaps,
  * use, and reuse of id's in existing models. Certain models have
  * been known to use more than one ID, indicative perhaps of
- * manufacturing revisions. In any event, we consider these 
+ * manufacturing revisions. In any event, we consider these
  * IDs to not be model-specific nor unique.
  */
 static const struct usb_device_id aiptek_ids[] = {
@@ -814,15 +813,9 @@ static int aiptek_open(struct input_dev *inputdev)
 {
 	struct aiptek *aiptek = inputdev->private;
 
-	if (aiptek->openCount++ > 0) {
-		return 0;
-	}
-
 	aiptek->urb->dev = aiptek->usbdev;
-	if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0) {
-		aiptek->openCount--;
+	if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
 		return -EIO;
-	}
 
 	return 0;
 }
@@ -834,13 +827,11 @@ static void aiptek_close(struct input_dev *inputdev)
 {
 	struct aiptek *aiptek = inputdev->private;
 
-	if (--aiptek->openCount == 0) {
-		usb_kill_urb(aiptek->urb);
-	}
+	usb_kill_urb(aiptek->urb);
 }
 
 /***********************************************************************
- * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x, 
+ * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
  * where they were known as usb_set_report and usb_get_report.
  */
 static int
@@ -2252,7 +2243,6 @@ static void aiptek_disconnect(struct usb_interface *intf)
 				AIPTEK_PACKET_LENGTH,
 				aiptek->data, aiptek->data_dma);
 		kfree(aiptek);
-		aiptek = NULL;
 	}
 }
 
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index 860df26..db95c97 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -1,15 +1,15 @@
-/* 
+/*
  *  USB ATI Remote support
  *
  *  Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
  *  Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
  *
  *  This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
- *  porting to the 2.6 kernel interfaces, along with other modification 
+ *  porting to the 2.6 kernel interfaces, along with other modification
  *  to better match the style of the existing usb/input drivers.  However, the
  *  protocol and hardware handling is essentially unchanged from 2.1.1.
- *  
- *  The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by 
+ *
+ *  The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
  *  Vojtech Pavlik.
  *
  *  Changes:
@@ -23,64 +23,64 @@
  *            Added support for the "Lola" remote contributed by:
  *                Seth Cohn <sethcohn@yahoo.com>
  *
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or 
+ * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- * 
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 
+ *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
  *
  * Hardware & software notes
  *
- * These remote controls are distributed by ATI as part of their 
- * "All-In-Wonder" video card packages.  The receiver self-identifies as a 
+ * These remote controls are distributed by ATI as part of their
+ * "All-In-Wonder" video card packages.  The receiver self-identifies as a
  * "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
  *
- * The "Lola" remote is available from X10.  See: 
+ * The "Lola" remote is available from X10.  See:
  *    http://www.x10.com/products/lola_sg1.htm
  * The Lola is similar to the ATI remote but has no mouse support, and slightly
  * different keys.
  *
- * It is possible to use multiple receivers and remotes on multiple computers 
+ * It is possible to use multiple receivers and remotes on multiple computers
  * simultaneously by configuring them to use specific channels.
- * 
- * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.  
- * Actually, it may even support more, at least in some revisions of the 
+ *
+ * The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
+ * Actually, it may even support more, at least in some revisions of the
  * hardware.
  *
  * Each remote can be configured to transmit on one channel as follows:
- *   - Press and hold the "hand icon" button.  
- *   - When the red LED starts to blink, let go of the "hand icon" button. 
- *   - When it stops blinking, input the channel code as two digits, from 01 
+ *   - Press and hold the "hand icon" button.
+ *   - When the red LED starts to blink, let go of the "hand icon" button.
+ *   - When it stops blinking, input the channel code as two digits, from 01
  *     to 16, and press the hand icon again.
- * 
+ *
  * The timing can be a little tricky.  Try loading the module with debug=1
  * to have the kernel print out messages about the remote control number
  * and mask.  Note: debugging prints remote numbers as zero-based hexadecimal.
  *
  * The driver has a "channel_mask" parameter. This bitmask specifies which
- * channels will be ignored by the module.  To mask out channels, just add 
+ * channels will be ignored by the module.  To mask out channels, just add
  * all the 2^channel_number values together.
  *
  * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
- * ignore signals coming from remote controls transmitting on channel 4, but 
+ * ignore signals coming from remote controls transmitting on channel 4, but
  * accept all other channels.
  *
- * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be 
+ * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
  * ignored.
  *
- * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this 
+ * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
  * parameter are unused.
  *
  */
@@ -99,13 +99,13 @@
 /*
  * Module and Version Information, Module Parameters
  */
- 
-#define ATI_REMOTE_VENDOR_ID 	0x0bc7
-#define ATI_REMOTE_PRODUCT_ID 	0x004
-#define LOLA_REMOTE_PRODUCT_ID 	0x002
+
+#define ATI_REMOTE_VENDOR_ID	0x0bc7
+#define ATI_REMOTE_PRODUCT_ID	0x004
+#define LOLA_REMOTE_PRODUCT_ID	0x002
 #define MEDION_REMOTE_PRODUCT_ID 0x006
 
-#define DRIVER_VERSION 	        "2.2.1"
+#define DRIVER_VERSION	        "2.2.1"
 #define DRIVER_AUTHOR           "Torrey Hoffman <thoffman@arnor.net>"
 #define DRIVER_DESC             "ATI/X10 RF USB Remote Control"
 
@@ -113,18 +113,18 @@
 #define DATA_BUFSIZE      63    /* size of URB data buffers */
 #define ATI_INPUTNUM      1     /* Which input device to register as */
 
-static unsigned long channel_mask = 0;
+static unsigned long channel_mask;
 module_param(channel_mask, ulong, 0444);
 MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
 
-static int debug = 0;
+static int debug;
 module_param(debug, int, 0444);
 MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
 
 #define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
 #undef err
 #define err(format, arg...) printk(KERN_ERR format , ## arg)
- 
+
 static struct usb_device_id ati_remote_table[] = {
 	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
 	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
@@ -148,7 +148,7 @@ static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
 /* Acceleration curve for directional control pad */
 static char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
 
-/* Duplicate event filtering time. 
+/* Duplicate event filtering time.
  * Sequential, identical KIND_FILTERED inputs with less than
  * FILTER_TIME jiffies between them are considered as repeat
  * events. The hardware generates 5 events for the first keypress
@@ -161,10 +161,10 @@ static char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
 static DECLARE_MUTEX(disconnect_sem);
 
 struct ati_remote {
-	struct input_dev idev;		
+	struct input_dev idev;
 	struct usb_device *udev;
 	struct usb_interface *interface;
-		
+
 	struct urb *irq_urb;
 	struct urb *out_urb;
 	struct usb_endpoint_descriptor *endpoint_in;
@@ -174,13 +174,11 @@ struct ati_remote {
 	dma_addr_t inbuf_dma;
 	dma_addr_t outbuf_dma;
 
-	int open;                   /* open counter */
-	
 	unsigned char old_data[2];  /* Detect duplicate events */
 	unsigned long old_jiffies;
 	unsigned long acc_jiffies;  /* handle acceleration */
 	unsigned int repeat_count;
-	
+
 	char name[NAME_BUFSIZE];
 	char phys[NAME_BUFSIZE];
 
@@ -206,14 +204,14 @@ static struct
 	int type;
 	unsigned int code;
 	int value;
-}  ati_remote_tbl[] = 
+}  ati_remote_tbl[] =
 {
 	/* Directional control pad axes */
 	{KIND_ACCEL,   0x35, 0x70, EV_REL, REL_X, -1},	 /* left */
 	{KIND_ACCEL,   0x36, 0x71, EV_REL, REL_X, 1},    /* right */
 	{KIND_ACCEL,   0x37, 0x72, EV_REL, REL_Y, -1},	 /* up */
 	{KIND_ACCEL,   0x38, 0x73, EV_REL, REL_Y, 1},    /* down */
-	/* Directional control pad diagonals */	
+	/* Directional control pad diagonals */
 	{KIND_LU,      0x39, 0x74, EV_REL, 0, 0},        /* left up */
 	{KIND_RU,      0x3a, 0x75, EV_REL, 0, 0},        /* right up */
 	{KIND_LD,      0x3c, 0x77, EV_REL, 0, 0},        /* left down */
@@ -225,7 +223,7 @@ static struct
 	{KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
 	{KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
 
-	/* Artificial "doubleclick" events are generated by the hardware. 
+	/* Artificial "doubleclick" events are generated by the hardware.
 	 * They are mapped to the "side" and "extra" mouse buttons here. */
 	{KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
 	{KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
@@ -273,15 +271,15 @@ static struct
 	{KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1},       /* ( >) */
 	{KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1},     /* (<<) */
 	{KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1},    /* (>>) */
-	{KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1},       /* ([]) */ 
+	{KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1},       /* ([]) */
 	{KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1},      /* ('') */
 	{KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1},   /* (<-) */
 	{KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1},       /* (>+) */
 	{KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1},       /* PLAYING */
 	{KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1},       /* TOP */
 	{KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1},        /* END */
-	{KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1},     /* SELECT */	
-	
+	{KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1},     /* SELECT */
+
 	{KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
 };
 
@@ -315,7 +313,7 @@ static void ati_remote_dump(unsigned char *data, unsigned int len)
 	if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
 		warn("Weird byte 0x%02x", data[0]);
 	else if (len == 4)
-		warn("Weird key %02x %02x %02x %02x", 
+		warn("Weird key %02x %02x %02x %02x",
 		     data[0], data[1], data[2], data[3]);
 	else
 		warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...",
@@ -328,25 +326,16 @@ static void ati_remote_dump(unsigned char *data, unsigned int len)
 static int ati_remote_open(struct input_dev *inputdev)
 {
 	struct ati_remote *ati_remote = inputdev->private;
-	int retval = 0;
-
-	down(&disconnect_sem);
-
-	if (ati_remote->open++)
-		goto exit;
 
 	/* On first open, submit the read urb which was set up previously. */
 	ati_remote->irq_urb->dev = ati_remote->udev;
 	if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
-		dev_err(&ati_remote->interface->dev, 
+		dev_err(&ati_remote->interface->dev,
 			"%s: usb_submit_urb failed!\n", __FUNCTION__);
-		ati_remote->open--;
-		retval = -EIO;
+		return -EIO;
 	}
 
-exit:
-	up(&disconnect_sem);
-	return retval;
+	return 0;
 }
 
 /*
@@ -355,9 +344,8 @@ exit:
 static void ati_remote_close(struct input_dev *inputdev)
 {
 	struct ati_remote *ati_remote = inputdev->private;
-	
-	if (!--ati_remote->open)
-		usb_kill_urb(ati_remote->irq_urb);
+
+	usb_kill_urb(ati_remote->irq_urb);
 }
 
 /*
@@ -366,13 +354,13 @@ static void ati_remote_close(struct input_dev *inputdev)
 static void ati_remote_irq_out(struct urb *urb, struct pt_regs *regs)
 {
 	struct ati_remote *ati_remote = urb->context;
-	
+
 	if (urb->status) {
 		dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
 			__FUNCTION__, urb->status);
 		return;
 	}
-	
+
 	ati_remote->send_flags |= SEND_FLAG_COMPLETE;
 	wmb();
 	wake_up(&ati_remote->wait);
@@ -380,16 +368,16 @@ static void ati_remote_irq_out(struct urb *urb, struct pt_regs *regs)
 
 /*
  *	ati_remote_sendpacket
- *		
+ *
  *	Used to send device initialization strings
  */
 static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
 {
 	int retval = 0;
-	
+
 	/* Set up out_urb */
 	memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
-	((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);	
+	((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
 
 	ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
 	ati_remote->out_urb->dev = ati_remote->udev;
@@ -397,17 +385,17 @@ static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigne
 
 	retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
 	if (retval) {
-		dev_dbg(&ati_remote->interface->dev, 
+		dev_dbg(&ati_remote->interface->dev,
 			 "sendpacket: usb_submit_urb failed: %d\n", retval);
 		return retval;
 	}
 
 	wait_event_timeout(ati_remote->wait,
 		((ati_remote->out_urb->status != -EINPROGRESS) ||
-		 	(ati_remote->send_flags & SEND_FLAG_COMPLETE)),
+			(ati_remote->send_flags & SEND_FLAG_COMPLETE)),
 		HZ);
 	usb_kill_urb(ati_remote->out_urb);
-	
+
 	return retval;
 }
 
@@ -419,15 +407,15 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
 	int i;
 
 	for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
-		/* 
-		 * Decide if the table entry matches the remote input. 
+		/*
+		 * Decide if the table entry matches the remote input.
 		 */
 		if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
-		    ((((ati_remote_tbl[i].data1 >> 4) - 
-		       (d1 >> 4) + rem) & 0x0f) == 0x0f) && 
+		    ((((ati_remote_tbl[i].data1 >> 4) -
+		       (d1 >> 4) + rem) & 0x0f) == 0x0f) &&
 		    (ati_remote_tbl[i].data2 == d2))
 			return i;
-		
+
 	}
 	return -1;
 }
@@ -435,16 +423,16 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
 /*
  *	ati_remote_report_input
  */
-static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)	
+static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
 {
 	struct ati_remote *ati_remote = urb->context;
 	unsigned char *data= ati_remote->inbuf;
-	struct input_dev *dev = &ati_remote->idev; 
+	struct input_dev *dev = &ati_remote->idev;
 	int index, acc;
 	int remote_num;
-	
+
 	/* Deal with strange looking inputs */
-	if ( (urb->actual_length != 4) || (data[0] != 0x14) || 
+	if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
 		((data[3] & 0x0f) != 0x00) ) {
 		ati_remote_dump(data, urb->actual_length);
 		return;
@@ -453,7 +441,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
 	/* Mask unwanted remote channels.  */
 	/* note: remote_num is 0-based, channel 1 on remote == 0 here */
 	remote_num = (data[3] >> 4) & 0x0f;
-        if (channel_mask & (1 << (remote_num + 1))) { 
+        if (channel_mask & (1 << (remote_num + 1))) {
 		dbginfo(&ati_remote->interface->dev,
 			"Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
 			remote_num, data[1], data[2], channel_mask);
@@ -463,37 +451,36 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
 	/* Look up event code index in translation table */
 	index = ati_remote_event_lookup(remote_num, data[1], data[2]);
 	if (index < 0) {
-		dev_warn(&ati_remote->interface->dev, 
-			 "Unknown input from channel 0x%02x: data %02x,%02x\n", 
+		dev_warn(&ati_remote->interface->dev,
+			 "Unknown input from channel 0x%02x: data %02x,%02x\n",
 			 remote_num, data[1], data[2]);
 		return;
-	} 
-	dbginfo(&ati_remote->interface->dev, 
+	}
+	dbginfo(&ati_remote->interface->dev,
 		"channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
 		remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
-	
+
 	if (ati_remote_tbl[index].kind == KIND_LITERAL) {
 		input_regs(dev, regs);
 		input_event(dev, ati_remote_tbl[index].type,
 			ati_remote_tbl[index].code,
 			ati_remote_tbl[index].value);
 		input_sync(dev);
-		
+
 		ati_remote->old_jiffies = jiffies;
 		return;
 	}
-	
+
 	if (ati_remote_tbl[index].kind == KIND_FILTERED) {
 		/* Filter duplicate events which happen "too close" together. */
-		if ((ati_remote->old_data[0] == data[1]) && 
-	 		(ati_remote->old_data[1] == data[2]) && 
-	 		((ati_remote->old_jiffies + FILTER_TIME) > jiffies)) {
+		if ((ati_remote->old_data[0] == data[1]) &&
+			(ati_remote->old_data[1] == data[2]) &&
+			((ati_remote->old_jiffies + FILTER_TIME) > jiffies)) {
 			ati_remote->repeat_count++;
-		} 
-		else {
+		} else {
 			ati_remote->repeat_count = 0;
 		}
-		
+
 		ati_remote->old_data[0] = data[1];
 		ati_remote->old_data[1] = data[2];
 		ati_remote->old_jiffies = jiffies;
@@ -501,7 +488,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
 		if ((ati_remote->repeat_count > 0)
 		    && (ati_remote->repeat_count < 5))
 			return;
-		
+
 
 		input_regs(dev, regs);
 		input_event(dev, ati_remote_tbl[index].type,
@@ -511,13 +498,13 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
 		input_sync(dev);
 
 		return;
-	}			
-	
-	/* 
+	}
+
+	/*
 	 * Other event kinds are from the directional control pad, and have an
 	 * acceleration factor applied to them.  Without this acceleration, the
 	 * control pad is mostly unusable.
-	 * 
+	 *
 	 * If elapsed time since last event is > 1/4 second, user "stopped",
 	 * so reset acceleration. Otherwise, user is probably holding the control
 	 * pad down, so we increase acceleration, ramping up over two seconds to
@@ -559,7 +546,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
 		input_report_rel(dev, REL_Y, acc);
 		break;
 	default:
-		dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", 
+		dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
 			ati_remote_tbl[index].kind);
 	}
 	input_sync(dev);
@@ -586,12 +573,12 @@ static void ati_remote_irq_in(struct urb *urb, struct pt_regs *regs)
 	case -ESHUTDOWN:
 		dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
 			__FUNCTION__);
-		return;	
+		return;
 	default:		/* error */
-		dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n", 
+		dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
 			__FUNCTION__, urb->status);
 	}
-	
+
 	retval = usb_submit_urb(urb, SLAB_ATOMIC);
 	if (retval)
 		dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
@@ -603,8 +590,6 @@ static void ati_remote_irq_in(struct urb *urb, struct pt_regs *regs)
  */
 static void ati_remote_delete(struct ati_remote *ati_remote)
 {
-	if (!ati_remote) return;
-
 	if (ati_remote->irq_urb)
 		usb_kill_urb(ati_remote->irq_urb);
 
@@ -614,16 +599,16 @@ static void ati_remote_delete(struct ati_remote *ati_remote)
 	input_unregister_device(&ati_remote->idev);
 
 	if (ati_remote->inbuf)
-		usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, 
+		usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
 				ati_remote->inbuf, ati_remote->inbuf_dma);
-		
+
 	if (ati_remote->outbuf)
-		usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, 
+		usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
 				ati_remote->outbuf, ati_remote->outbuf_dma);
-	
+
 	if (ati_remote->irq_urb)
 		usb_free_urb(ati_remote->irq_urb);
-	
+
 	if (ati_remote->out_urb)
 		usb_free_urb(ati_remote->out_urb);
 
@@ -636,21 +621,21 @@ static void ati_remote_input_init(struct ati_remote *ati_remote)
 	int i;
 
 	idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
-	idev->keybit[LONG(BTN_MOUSE)] = ( BIT(BTN_LEFT) | BIT(BTN_RIGHT) | 
+	idev->keybit[LONG(BTN_MOUSE)] = ( BIT(BTN_LEFT) | BIT(BTN_RIGHT) |
 					  BIT(BTN_SIDE) | BIT(BTN_EXTRA) );
 	idev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
 	for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++)
 		if (ati_remote_tbl[i].type == EV_KEY)
 			set_bit(ati_remote_tbl[i].code, idev->keybit);
-	
+
 	idev->private = ati_remote;
 	idev->open = ati_remote_open;
 	idev->close = ati_remote_close;
-	
+
 	idev->name = ati_remote->name;
 	idev->phys = ati_remote->phys;
-	
-	idev->id.bustype = BUS_USB;		
+
+	idev->id.bustype = BUS_USB;
 	idev->id.vendor = le16_to_cpu(ati_remote->udev->descriptor.idVendor);
 	idev->id.product = le16_to_cpu(ati_remote->udev->descriptor.idProduct);
 	idev->id.version = le16_to_cpu(ati_remote->udev->descriptor.bcdDevice);
@@ -660,27 +645,27 @@ static int ati_remote_initialize(struct ati_remote *ati_remote)
 {
 	struct usb_device *udev = ati_remote->udev;
 	int pipe, maxp;
-		
+
 	init_waitqueue_head(&ati_remote->wait);
 
 	/* Set up irq_urb */
 	pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress);
 	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 	maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
-	
-	usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf, 
-			 maxp, ati_remote_irq_in, ati_remote, 
+
+	usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf,
+			 maxp, ati_remote_irq_in, ati_remote,
 			 ati_remote->endpoint_in->bInterval);
 	ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma;
 	ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-	
+
 	/* Set up out_urb */
 	pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress);
 	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 	maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
 
-	usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf, 
-			 maxp, ati_remote_irq_out, ati_remote, 
+	usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf,
+			 maxp, ati_remote_irq_out, ati_remote,
 			 ati_remote->endpoint_out->bInterval);
 	ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma;
 	ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -688,11 +673,11 @@ static int ati_remote_initialize(struct ati_remote *ati_remote)
 	/* send initialization strings */
 	if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
 	    (ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
-		dev_err(&ati_remote->interface->dev, 
+		dev_err(&ati_remote->interface->dev,
 			 "Initializing ati_remote hardware failed.\n");
 		return 1;
 	}
-	
+
 	return 0;
 }
 
@@ -769,7 +754,7 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
 
 	if (!strlen(ati_remote->name))
 		sprintf(ati_remote->name, DRIVER_DESC "(%04x,%04x)",
-			le16_to_cpu(ati_remote->udev->descriptor.idVendor), 
+			le16_to_cpu(ati_remote->udev->descriptor.idVendor),
 			le16_to_cpu(ati_remote->udev->descriptor.idProduct));
 
 	/* Device Hardware Initialization - fills in ati_remote->idev from udev. */
@@ -781,11 +766,11 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
 	ati_remote_input_init(ati_remote);
 	input_register_device(&ati_remote->idev);
 
-	dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n", 
+	dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n",
 		 ati_remote->name, path);
 
 	usb_set_intfdata(interface, ati_remote);
-	
+
 error:
 	if (retval)
 		ati_remote_delete(ati_remote);
@@ -800,18 +785,14 @@ static void ati_remote_disconnect(struct usb_interface *interface)
 {
 	struct ati_remote *ati_remote;
 
-	down(&disconnect_sem);
-
 	ati_remote = usb_get_intfdata(interface);
 	usb_set_intfdata(interface, NULL);
 	if (!ati_remote) {
 		warn("%s - null device?\n", __FUNCTION__);
 		return;
 	}
-	
-	ati_remote_delete(ati_remote);
 
-	up(&disconnect_sem);
+	ati_remote_delete(ati_remote);
 }
 
 /*
@@ -820,7 +801,7 @@ static void ati_remote_disconnect(struct usb_interface *interface)
 static int __init ati_remote_init(void)
 {
 	int result;
-	
+
 	result = usb_register(&ati_remote_driver);
 	if (result)
 		err("usb_register error #%d\n", result);
@@ -838,8 +819,8 @@ static void __exit ati_remote_exit(void)
 	usb_deregister(&ati_remote_driver);
 }
 
-/* 
- *	module specification 
+/*
+ *	module specification
  */
 
 module_init(ati_remote_init);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 740dec1..100b49bd 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -232,7 +232,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 	report->size += parser->global.report_size * parser->global.report_count;
 
 	if (!parser->local.usage_index) /* Ignore padding fields */
-		return 0; 
+		return 0;
 
 	usages = max_t(int, parser->local.usage_index, parser->global.report_count);
 
@@ -765,7 +765,7 @@ static __inline__ __u32 s32ton(__s32 value, unsigned n)
 static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n)
 {
 	report += (offset >> 5) << 2; offset &= 31;
-	return (le64_to_cpu(get_unaligned((__le64*)report)) >> offset) & ((1 << n) - 1);
+	return (le64_to_cpu(get_unaligned((__le64*)report)) >> offset) & ((1ULL << n) - 1);
 }
 
 static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value)
@@ -1233,6 +1233,13 @@ int hid_wait_io(struct hid_device *hid)
 	return 0;
 }
 
+static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle)
+{
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+		HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, (idle << 8) | report,
+		ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
 static int hid_get_class_descriptor(struct usb_device *dev, int ifnum,
 		unsigned char type, void *buf, int size)
 {
@@ -1301,10 +1308,6 @@ void hid_init_reports(struct hid_device *hid)
 
 	if (err)
 		warn("timeout initializing reports\n");
-
-	usb_control_msg(hid->dev, usb_sndctrlpipe(hid->dev, 0),
-		HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
-		hid->ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
 #define USB_VENDOR_ID_WACOM		0x056a
@@ -1318,6 +1321,10 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_WACOM_INTUOS3	0x00B0
 #define USB_DEVICE_ID_WACOM_CINTIQ	0x003F
 
+#define USB_VENDOR_ID_ACECAD		0x0460
+#define USB_DEVICE_ID_ACECAD_FLAIR	0x0004
+#define USB_DEVICE_ID_ACECAD_302	0x0008
+
 #define USB_VENDOR_ID_KBGEAR		0x084e
 #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO	0x1001
 
@@ -1502,6 +1509,9 @@ static struct hid_blacklist {
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 
+	{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
+
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
@@ -1590,6 +1600,8 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 		return NULL;
 	}
 
+	hid_set_idle(dev, interface->desc.bInterfaceNumber, 0, 0);
+
 	if ((n = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, HID_DT_REPORT, rdesc, rsize)) < 0) {
 		dbg("reading report descriptor failed");
 		kfree(rdesc);
@@ -1635,7 +1647,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 		/* Change the polling interval of mice. */
 		if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0)
 			interval = hid_mousepoll_interval;
-		
+
 		if (endpoint->bEndpointAddress & USB_DIR_IN) {
 			if (hid->urbin)
 				continue;
diff --git a/drivers/usb/input/hid-debug.h b/drivers/usb/input/hid-debug.h
index 2b91705..52437e5 100644
--- a/drivers/usb/input/hid-debug.h
+++ b/drivers/usb/input/hid-debug.h
@@ -67,7 +67,7 @@ static const struct hid_usage_entry hid_usage_table[] = {
       {0, 0x44, "Vbry"},
       {0, 0x45, "Vbrz"},
       {0, 0x46, "Vno"},
-    {0, 0x80, "SystemControl"}, 
+    {0, 0x80, "SystemControl"},
       {0, 0x81, "SystemPowerDown"},
       {0, 0x82, "SystemSleep"},
       {0, 0x83, "SystemWakeUp"},
@@ -347,7 +347,7 @@ __inline__ static void tab(int n) {
 
 static void hid_dump_field(struct hid_field *field, int n) {
 	int j;
-	
+
 	if (field->physical) {
 		tab(n);
 		printk("Physical(");
@@ -408,7 +408,7 @@ static void hid_dump_field(struct hid_field *field, int n) {
 					printk("%s", units[sys][i]);
 					if(nibble != 1) {
 						/* This is a _signed_ nibble(!) */
-	
+
 						int val = nibble & 0x7;
 						if(nibble & 0x08)
 							val = -((0x7 & ~val) +1);
@@ -443,7 +443,7 @@ static void __attribute__((unused)) hid_dump_device(struct hid_device *device) {
 	struct list_head *list;
 	unsigned i,k;
 	static char *table[] = {"INPUT", "OUTPUT", "FEATURE"};
-	
+
 	for (i = 0; i < HID_REPORT_TYPES; i++) {
 		report_enum = device->report_enum + i;
 		list = report_enum->report_list.next;
@@ -664,8 +664,8 @@ static char *keys[KEY_MAX + 1] = {
 static char *relatives[REL_MAX + 1] = {
 	[REL_X] = "X",			[REL_Y] = "Y",
 	[REL_Z] = "Z",			[REL_HWHEEL] = "HWheel",
-	[REL_DIAL] = "Dial",		[REL_WHEEL] = "Wheel", 
-	[REL_MISC] = "Misc",	
+	[REL_DIAL] = "Dial",		[REL_WHEEL] = "Wheel",
+	[REL_MISC] = "Misc",
 };
 
 static char *absolutes[ABS_MAX + 1] = {
@@ -690,9 +690,9 @@ static char *misc[MSC_MAX + 1] = {
 };
 
 static char *leds[LED_MAX + 1] = {
-	[LED_NUML] = "NumLock",		[LED_CAPSL] = "CapsLock", 
+	[LED_NUML] = "NumLock",		[LED_CAPSL] = "CapsLock",
 	[LED_SCROLLL] = "ScrollLock",	[LED_COMPOSE] = "Compose",
-	[LED_KANA] = "Kana",		[LED_SLEEP] = "Sleep", 
+	[LED_KANA] = "Kana",		[LED_SLEEP] = "Sleep",
 	[LED_SUSPEND] = "Suspend",	[LED_MUTE] = "Mute",
 	[LED_MISC] = "Misc",
 };
diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c
index 5553c35..9ac1e90 100644
--- a/drivers/usb/input/hid-input.c
+++ b/drivers/usb/input/hid-input.c
@@ -164,7 +164,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 				case HID_GD_X: case HID_GD_Y: case HID_GD_Z:
 				case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ:
 				case HID_GD_SLIDER: case HID_GD_DIAL: case HID_GD_WHEEL:
-					if (field->flags & HID_MAIN_ITEM_RELATIVE) 
+					if (field->flags & HID_MAIN_ITEM_RELATIVE)
 						map_rel(usage->hid & 0xf);
 					else
 						map_abs(usage->hid & 0xf);
@@ -297,7 +297,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case HID_UP_MSVENDOR:
 
 			goto ignore;
-			
+
 		case HID_UP_PID:
 
 			set_bit(EV_FF, input->evbit);
@@ -349,7 +349,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		goto ignore;
 
 	if ((device->quirks & (HID_QUIRK_2WHEEL_MOUSE_HACK_7 | HID_QUIRK_2WHEEL_MOUSE_HACK_5)) &&
-		 (usage->type == EV_REL) && (usage->code == REL_WHEEL)) 
+		 (usage->type == EV_REL) && (usage->code == REL_WHEEL))
 			set_bit(REL_HWHEEL, bit);
 
 	if (((device->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_5) && (usage->hid == 0x00090005))
@@ -365,11 +365,11 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			a = field->logical_minimum = 0;
 			b = field->logical_maximum = 255;
 		}
-		
+
 		if (field->application == HID_GD_GAMEPAD || field->application == HID_GD_JOYSTICK)
 			input_set_abs_params(input, usage->code, a, b, (b - a) >> 8, (b - a) >> 4);
 		else	input_set_abs_params(input, usage->code, a, b, 0, 0);
-		
+
 	}
 
 	if (usage->hat_min < usage->hat_max || usage->hat_dir) {
@@ -420,7 +420,7 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 		return;
 	}
 
-	if (usage->hat_min < usage->hat_max || usage->hat_dir) { 
+	if (usage->hat_min < usage->hat_max || usage->hat_dir) {
 		int hat_dir = usage->hat_dir;
 		if (!hat_dir)
 			hat_dir = (value - usage->hat_min) * 8 / (usage->hat_max - usage->hat_min + 1) + 1;
@@ -551,7 +551,7 @@ int hidinput_connect(struct hid_device *hid)
 	for (i = 0; i < hid->maxcollection; i++)
 		if (hid->collection[i].type == HID_COLLECTION_APPLICATION ||
 		    hid->collection[i].type == HID_COLLECTION_PHYSICAL)
-		    	if (IS_INPUT_APPLICATION(hid->collection[i].usage))
+			if (IS_INPUT_APPLICATION(hid->collection[i].usage))
 				break;
 
 	if (i == hid->maxcollection)
@@ -592,7 +592,7 @@ int hidinput_connect(struct hid_device *hid)
 				for (j = 0; j < report->field[i]->maxusage; j++)
 					hidinput_configure_usage(hidinput, report->field[i],
 								 report->field[i]->usage + j);
-			
+
 			if (hid->quirks & HID_QUIRK_MULTI_INPUT) {
 				/* This will leave hidinput NULL, so that it
 				 * allocates another one if we have more inputs on
diff --git a/drivers/usb/input/hid-lgff.c b/drivers/usb/input/hid-lgff.c
index 0d7404b..0c4c77a 100644
--- a/drivers/usb/input/hid-lgff.c
+++ b/drivers/usb/input/hid-lgff.c
@@ -94,7 +94,7 @@ struct lgff_device {
 					isn't really necessary */
 
 	unsigned long flags[1];      /* Contains various information about the
-				        state of the driver for this device */	
+				        state of the driver for this device */
 
 	struct timer_list timer;
 };
@@ -234,7 +234,7 @@ static struct hid_report* hid_lgff_duplicate_report(struct hid_report* report)
 		kfree(ret);
 		return NULL;
 	}
-	memset(ret->field[0]->value, 0, sizeof(s32[8]));	
+	memset(ret->field[0]->value, 0, sizeof(s32[8]));
 
 	return ret;
 }
@@ -295,11 +295,11 @@ static int hid_lgff_event(struct hid_device *hid, struct input_dev* input,
 	unsigned long flags;
 
 	if (type != EV_FF)                     return -EINVAL;
-       	if (!LGFF_CHECK_OWNERSHIP(code, lgff)) return -EACCES;
+	if (!LGFF_CHECK_OWNERSHIP(code, lgff)) return -EACCES;
 	if (value < 0)                         return -EINVAL;
 
 	spin_lock_irqsave(&lgff->lock, flags);
-	
+
 	if (value > 0) {
 		if (test_bit(EFFECT_STARTED, effect->flags)) {
 			spin_unlock_irqrestore(&lgff->lock, flags);
@@ -345,7 +345,7 @@ static int hid_lgff_flush(struct input_dev *dev, struct file *file)
 		  and perform ioctls on the same fd all at the same time */
 		if ( current->pid == lgff->effects[i].owner
 		     && test_bit(EFFECT_USED, lgff->effects[i].flags)) {
-			
+
 			if (hid_lgff_erase(dev, i))
 				warn("erase effect %d failed", i);
 		}
@@ -378,7 +378,7 @@ static int hid_lgff_upload_effect(struct input_dev* input,
 	struct lgff_effect new;
 	int id;
 	unsigned long flags;
-	
+
 	dbg("ioctl rumble");
 
 	if (!test_bit(effect->type, input->ffbit)) return -EINVAL;
@@ -441,7 +441,7 @@ static void hid_lgff_timer(unsigned long timer_data)
 
 	spin_lock_irqsave(&lgff->lock, flags);
 
- 	for (i=0; i<LGFF_EFFECTS; ++i) {
+	for (i=0; i<LGFF_EFFECTS; ++i) {
 		struct lgff_effect* effect = lgff->effects +i;
 
 		if (test_bit(EFFECT_PLAYING, effect->flags)) {
@@ -491,7 +491,7 @@ static void hid_lgff_timer(unsigned long timer_data)
 				set_bit(EFFECT_PLAYING, lgff->effects[i].flags);
 			}
 		}
- 	}
+	}
 
 #define CLAMP(x) if (x < 0) x = 0; if (x > 0xff) x = 0xff
 
@@ -524,5 +524,5 @@ static void hid_lgff_timer(unsigned long timer_data)
 		add_timer(&lgff->timer);
 	}
 
- 	spin_unlock_irqrestore(&lgff->lock, flags);
+	spin_unlock_irqrestore(&lgff->lock, flags);
 }
diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h
index 6d9329c..c1b6b69 100644
--- a/drivers/usb/input/hid.h
+++ b/drivers/usb/input/hid.h
@@ -118,7 +118,7 @@ struct hid_item {
 #define HID_MAIN_ITEM_CONSTANT		0x001
 #define HID_MAIN_ITEM_VARIABLE		0x002
 #define HID_MAIN_ITEM_RELATIVE		0x004
-#define HID_MAIN_ITEM_WRAP		0x008	
+#define HID_MAIN_ITEM_WRAP		0x008
 #define HID_MAIN_ITEM_NONLINEAR		0x010
 #define HID_MAIN_ITEM_NO_PREFERRED	0x020
 #define HID_MAIN_ITEM_NULL_STATE	0x040
@@ -172,14 +172,14 @@ struct hid_item {
 #define HID_USAGE_PAGE		0xffff0000
 
 #define HID_UP_UNDEFINED	0x00000000
-#define HID_UP_GENDESK 		0x00010000
-#define HID_UP_KEYBOARD 	0x00070000
-#define HID_UP_LED 		0x00080000
-#define HID_UP_BUTTON 		0x00090000
-#define HID_UP_ORDINAL 		0x000a0000
+#define HID_UP_GENDESK		0x00010000
+#define HID_UP_KEYBOARD		0x00070000
+#define HID_UP_LED		0x00080000
+#define HID_UP_BUTTON		0x00090000
+#define HID_UP_ORDINAL		0x000a0000
 #define HID_UP_CONSUMER		0x000c0000
-#define HID_UP_DIGITIZER 	0x000d0000
-#define HID_UP_PID 		0x000f0000
+#define HID_UP_DIGITIZER	0x000d0000
+#define HID_UP_PID		0x000f0000
 #define HID_UP_HPVENDOR         0xff7f0000
 #define HID_UP_MSVENDOR		0xff000000
 
@@ -406,7 +406,7 @@ struct hid_device {							/* device report descriptor */
 	dma_addr_t outbuf_dma;						/* Output buffer dma */
 	spinlock_t outlock;						/* Output fifo spinlock */
 
-	unsigned claimed;						/* Claimed by hidinput, hiddev? */	
+	unsigned claimed;						/* Claimed by hidinput, hiddev? */
 	unsigned quirks;						/* Various quirks the device can pull on us */
 
 	struct list_head inputs;					/* The list of inputs */
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 96b7c90..4c13331 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -95,7 +95,7 @@ hiddev_lookup_report(struct hid_device *hid, struct hiddev_report_info *rinfo)
 			return NULL;
 		rinfo->report_id = ((struct hid_report *) list)->id;
 		break;
-		
+
 	case HID_REPORT_ID_NEXT:
 		list = (struct list_head *)
 			report_enum->report_id_hash[rinfo->report_id & HID_REPORT_ID_MASK];
@@ -106,7 +106,7 @@ hiddev_lookup_report(struct hid_device *hid, struct hiddev_report_info *rinfo)
 			return NULL;
 		rinfo->report_id = ((struct hid_report *) list)->id;
 		break;
-		
+
 	default:
 		return NULL;
 	}
@@ -158,7 +158,7 @@ static void hiddev_send_event(struct hid_device *hid,
 		if (uref->field_index != HID_FIELD_INDEX_NONE ||
 		    (list->flags & HIDDEV_FLAG_REPORT) != 0) {
 			list->buffer[list->head] = *uref;
-			list->head = (list->head + 1) & 
+			list->head = (list->head + 1) &
 				(HIDDEV_BUFFER_SIZE - 1);
 			kill_fasync(&list->fasync, SIGIO, POLL_IN);
 		}
@@ -179,9 +179,9 @@ void hiddev_hid_event(struct hid_device *hid, struct hid_field *field,
 	unsigned type = field->report_type;
 	struct hiddev_usage_ref uref;
 
-	uref.report_type = 
+	uref.report_type =
 	  (type == HID_INPUT_REPORT) ? HID_REPORT_TYPE_INPUT :
-	  ((type == HID_OUTPUT_REPORT) ? HID_REPORT_TYPE_OUTPUT : 
+	  ((type == HID_OUTPUT_REPORT) ? HID_REPORT_TYPE_OUTPUT :
 	   ((type == HID_FEATURE_REPORT) ? HID_REPORT_TYPE_FEATURE:0));
 	uref.report_id = field->report->id;
 	uref.field_index = field->index;
@@ -199,9 +199,9 @@ void hiddev_report_event(struct hid_device *hid, struct hid_report *report)
 	struct hiddev_usage_ref uref;
 
 	memset(&uref, 0, sizeof(uref));
-	uref.report_type = 
+	uref.report_type =
 	  (type == HID_INPUT_REPORT) ? HID_REPORT_TYPE_INPUT :
-	  ((type == HID_OUTPUT_REPORT) ? HID_REPORT_TYPE_OUTPUT : 
+	  ((type == HID_OUTPUT_REPORT) ? HID_REPORT_TYPE_OUTPUT :
 	   ((type == HID_FEATURE_REPORT) ? HID_REPORT_TYPE_FEATURE:0));
 	uref.report_id = report->id;
 	uref.field_index = HID_FIELD_INDEX_NONE;
@@ -236,7 +236,7 @@ static int hiddev_release(struct inode * inode, struct file * file)
 	*listptr = (*listptr)->next;
 
 	if (!--list->hiddev->open) {
-		if (list->hiddev->exist) 
+		if (list->hiddev->exist)
 			hid_close(list->hiddev->hid);
 		else
 			kfree(list->hiddev);
@@ -303,7 +303,7 @@ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t coun
 		if (list->head == list->tail) {
 			add_wait_queue(&list->hiddev->wait, &wait);
 			set_current_state(TASK_INTERRUPTIBLE);
-			
+
 			while (list->head == list->tail) {
 				if (file->f_flags & O_NONBLOCK) {
 					retval = -EAGAIN;
@@ -317,7 +317,7 @@ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t coun
 					retval = -EIO;
 					break;
 				}
-				
+
 				schedule();
 			}
 
@@ -329,7 +329,7 @@ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t coun
 			return retval;
 
 
-		while (list->head != list->tail && 
+		while (list->head != list->tail &&
 		       retval + event_size <= count) {
 			if ((list->flags & HIDDEV_FLAG_UREF) == 0) {
 				if (list->buffer[list->tail].field_index !=
@@ -405,10 +405,10 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 			return -EINVAL;
 
 		for (i = 0; i < hid->maxcollection; i++)
-			if (hid->collection[i].type == 
+			if (hid->collection[i].type ==
 			    HID_COLLECTION_APPLICATION && arg-- == 0)
 				break;
-		
+
 		if (i == hid->maxcollection)
 			return -EINVAL;
 
@@ -562,7 +562,7 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 		if (!uref_multi)
 			return -ENOMEM;
 		uref = &uref_multi->uref;
-		if (copy_from_user(uref, user_arg, sizeof(*uref))) 
+		if (copy_from_user(uref, user_arg, sizeof(*uref)))
 			goto fault;
 
 		rinfo.report_type = uref->report_type;
@@ -595,7 +595,7 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 			return -ENOMEM;
 		uref = &uref_multi->uref;
 		if (cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) {
-			if (copy_from_user(uref_multi, user_arg, 
+			if (copy_from_user(uref_multi, user_arg,
 					   sizeof(*uref_multi)))
 				goto fault;
 		} else {
@@ -603,7 +603,7 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 				goto fault;
 		}
 
-		if (cmd != HIDIOCGUSAGE && 
+		if (cmd != HIDIOCGUSAGE &&
 		    cmd != HIDIOCGUSAGES &&
 		    uref->report_type == HID_REPORT_TYPE_INPUT)
 			goto inval;
@@ -651,16 +651,16 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 				return field->usage[uref->usage_index].collection_index;
 			case HIDIOCGUSAGES:
 				for (i = 0; i < uref_multi->num_values; i++)
-					uref_multi->values[i] = 
+					uref_multi->values[i] =
 					    field->value[uref->usage_index + i];
-				if (copy_to_user(user_arg, uref_multi, 
+				if (copy_to_user(user_arg, uref_multi,
 						 sizeof(*uref_multi)))
 					goto fault;
 				goto goodreturn;
 			case HIDIOCSUSAGES:
 				for (i = 0; i < uref_multi->num_values; i++)
-					field->value[uref->usage_index + i] = 
-				  	    uref_multi->values[i];
+					field->value[uref->usage_index + i] =
+					    uref_multi->values[i];
 				goto goodreturn;
 		}
 
@@ -670,7 +670,7 @@ goodreturn:
 fault:
 		kfree(uref_multi);
 		return -EFAULT;
-inval:		
+inval:
 		kfree(uref_multi);
 		return -EINVAL;
 
@@ -734,7 +734,7 @@ static struct usb_class_driver hiddev_class = {
 	.name =		"usb/hid/hiddev%d",
 	.fops =		&hiddev_fops,
 	.mode =		S_IFCHR | S_IRUGO | S_IWUSR,
-       	.minor_base =	HIDDEV_MINOR_BASE,
+	.minor_base =	HIDDEV_MINOR_BASE,
 };
 
 /*
@@ -747,7 +747,7 @@ int hiddev_connect(struct hid_device *hid)
 	int retval;
 
 	for (i = 0; i < hid->maxcollection; i++)
-		if (hid->collection[i].type == 
+		if (hid->collection[i].type ==
 		    HID_COLLECTION_APPLICATION &&
 		    !IS_INPUT_APPLICATION(hid->collection[i].usage))
 			break;
@@ -755,11 +755,11 @@ int hiddev_connect(struct hid_device *hid)
 	if (i == hid->maxcollection && (hid->quirks & HID_QUIRK_HIDDEV) == 0)
 		return -1;
 
- 	if (!(hiddev = kmalloc(sizeof(struct hiddev), GFP_KERNEL)))
+	if (!(hiddev = kmalloc(sizeof(struct hiddev), GFP_KERNEL)))
 		return -1;
 	memset(hiddev, 0, sizeof(struct hiddev));
 
- 	retval = usb_register_dev(hid->intf, &hiddev_class);
+	retval = usb_register_dev(hid->intf, &hiddev_class);
 	if (retval) {
 		err("Not able to get a minor for this device.");
 		kfree(hiddev);
@@ -768,12 +768,12 @@ int hiddev_connect(struct hid_device *hid)
 
 	init_waitqueue_head(&hiddev->wait);
 
- 	hiddev_table[hid->intf->minor - HIDDEV_MINOR_BASE] = hiddev;
+	hiddev_table[hid->intf->minor - HIDDEV_MINOR_BASE] = hiddev;
 
 	hiddev->hid = hid;
 	hiddev->exist = 1;
 
- 	hid->minor = hid->intf->minor;
+	hid->minor = hid->intf->minor;
 	hid->hiddev = hiddev;
 
 	return 0;
@@ -818,7 +818,7 @@ void hiddev_disconnect(struct hid_device *hid)
 /* We never attach in this manner, and rely on HID to connect us.  This
  * is why there is no disconnect routine defined in the usb_driver either.
  */
-static int hiddev_usbd_probe(struct usb_interface *intf, 
+static int hiddev_usbd_probe(struct usb_interface *intf,
 			     const struct usb_device_id *hiddev_info)
 {
 	return -ENODEV;
diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c
new file mode 100644
index 0000000..47dec6a
--- /dev/null
+++ b/drivers/usb/input/itmtouch.c
@@ -0,0 +1,268 @@
+/******************************************************************************
+ * itmtouch.c  --  Driver for ITM touchscreen panel
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based upon original work by Chris Collins <xfire-itmtouch@xware.cx>.
+ *
+ * Kudos to ITM for providing me with the datasheet for the panel,
+ * even though it was a day later than I had finished writing this
+ * driver.
+ *
+ * It has meant that I've been able to correct my interpretation of the
+ * protocol packets however.
+ *
+ * CC -- 2003/9/29
+ *
+ * History
+ * 1.0 & 1.1  2003 (CC) vojtech@suse.cz
+ *   Original version for 2.4.x kernels
+ *
+ * 1.2  02/03/2005 (HCE) hc@mivu.no
+ *   Complete rewrite to support Linux 2.6.10, thanks to mtouchusb.c for hints.
+ *   Unfortunately no calibration support at this time.
+ *
+ * 1.2.1  09/03/2005 (HCE) hc@mivu.no
+ *   Code cleanup and adjusting syntax to start matching kernel standards
+ *
+ *****************************************************************************/
+
+#include <linux/config.h>
+
+#ifdef CONFIG_USB_DEBUG
+	#define DEBUG
+#else
+	#undef DEBUG
+#endif
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+
+/* only an 8 byte buffer necessary for a single packet */
+#define ITM_BUFSIZE			8
+#define PATH_SIZE			64
+
+#define USB_VENDOR_ID_ITMINC		0x0403
+#define USB_PRODUCT_ID_TOUCHPANEL	0xf9e9
+
+#define DRIVER_AUTHOR "Hans-Christian Egtvedt <hc@mivu.no>"
+#define DRIVER_VERSION "v1.2.1"
+#define DRIVER_DESC "USB ITM Inc Touch Panel Driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE( DRIVER_LICENSE );
+
+struct itmtouch_dev {
+	struct usb_device	*usbdev; /* usb device */
+	struct input_dev	inputdev; /* input device */
+	struct urb		*readurb; /* urb */
+	char			rbuf[ITM_BUFSIZE]; /* data */
+	int			users;
+	char name[128];
+	char phys[64];
+};
+
+static struct usb_device_id itmtouch_ids [] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ITMINC, USB_PRODUCT_ID_TOUCHPANEL) },
+	{ }
+};
+
+static void itmtouch_irq(struct urb *urb, struct pt_regs *regs)
+{
+	struct itmtouch_dev * itmtouch = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	struct input_dev *dev = &itmtouch->inputdev;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ETIMEDOUT:
+		/* this urb is timing out */
+		dbg("%s - urb timed out - was the device unplugged?",
+		    __FUNCTION__);
+		return;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+		    __FUNCTION__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d",
+		    __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	input_regs(dev, regs);
+
+	/* if pressure has been released, then don't report X/Y */
+	if (data[7] & 0x20) {
+		input_report_abs(dev, ABS_X, (data[0] & 0x1F) << 7 | (data[3] & 0x7F));
+		input_report_abs(dev, ABS_Y, (data[1] & 0x1F) << 7 | (data[4] & 0x7F));
+	}
+
+	input_report_abs(dev, ABS_PRESSURE, (data[2] & 1) << 7 | (data[5] & 0x7F));
+	input_report_key(dev, BTN_TOUCH, ~data[7] & 0x20);
+	input_sync(dev);
+
+exit:
+	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	if (retval)
+		printk(KERN_ERR "%s - usb_submit_urb failed with result: %d",
+				__FUNCTION__, retval);
+}
+
+static int itmtouch_open(struct input_dev *input)
+{
+	struct itmtouch_dev *itmtouch = input->private;
+
+	itmtouch->readurb->dev = itmtouch->usbdev;
+
+	if (usb_submit_urb(itmtouch->readurb, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void itmtouch_close(struct input_dev *input)
+{
+	struct itmtouch_dev *itmtouch = input->private;
+
+	usb_kill_urb(itmtouch->readurb);
+}
+
+static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct itmtouch_dev *itmtouch;
+	struct usb_host_interface *interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	unsigned int pipe;
+	unsigned int maxp;
+	char path[PATH_SIZE];
+
+	interface = intf->cur_altsetting;
+	endpoint = &interface->endpoint[0].desc;
+
+	if (!(itmtouch = kcalloc(1, sizeof(struct itmtouch_dev), GFP_KERNEL))) {
+		err("%s - Out of memory.", __FUNCTION__);
+		return -ENOMEM;
+	}
+
+	itmtouch->usbdev = udev;
+
+	itmtouch->inputdev.private = itmtouch;
+	itmtouch->inputdev.open = itmtouch_open;
+	itmtouch->inputdev.close = itmtouch_close;
+
+	usb_make_path(udev, path, PATH_SIZE);
+
+	itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+	itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
+	itmtouch->inputdev.name = itmtouch->name;
+	itmtouch->inputdev.phys = itmtouch->phys;
+	itmtouch->inputdev.id.bustype = BUS_USB;
+	itmtouch->inputdev.id.vendor = udev->descriptor.idVendor;
+	itmtouch->inputdev.id.product = udev->descriptor.idProduct;
+	itmtouch->inputdev.id.version = udev->descriptor.bcdDevice;
+	itmtouch->inputdev.dev = &intf->dev;
+
+	if (!strlen(itmtouch->name))
+		sprintf(itmtouch->name, "USB ITM touchscreen");
+
+	/* device limits */
+	/* as specified by the ITM datasheet, X and Y are 12bit,
+	 * Z (pressure) is 8 bit. However, the fields are defined up
+	 * to 14 bits for future possible expansion.
+	 */
+	input_set_abs_params(&itmtouch->inputdev, ABS_X, 0, 0x0FFF, 2, 0);
+	input_set_abs_params(&itmtouch->inputdev, ABS_Y, 0, 0x0FFF, 2, 0);
+	input_set_abs_params(&itmtouch->inputdev, ABS_PRESSURE, 0, 0xFF, 2, 0);
+
+	/* initialise the URB so we can read from the transport stream */
+	pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+
+	if (maxp > ITM_BUFSIZE)
+		maxp = ITM_BUFSIZE;
+
+	itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL);
+
+	if (!itmtouch->readurb) {
+		dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__);
+		kfree(itmtouch);
+		return -ENOMEM;
+	}
+
+	usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf,
+			 maxp, itmtouch_irq, itmtouch, endpoint->bInterval);
+
+	input_register_device(&itmtouch->inputdev);
+
+	printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path);
+	usb_set_intfdata(intf, itmtouch);
+
+	return 0;
+}
+
+static void itmtouch_disconnect(struct usb_interface *intf)
+{
+	struct itmtouch_dev *itmtouch = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+
+	if (itmtouch) {
+		input_unregister_device(&itmtouch->inputdev);
+		usb_kill_urb(itmtouch->readurb);
+		usb_free_urb(itmtouch->readurb);
+		kfree(itmtouch);
+	}
+}
+
+MODULE_DEVICE_TABLE(usb, itmtouch_ids);
+
+static struct usb_driver itmtouch_driver = {
+	.owner =        THIS_MODULE,
+	.name =         "itmtouch",
+	.probe =        itmtouch_probe,
+	.disconnect =   itmtouch_disconnect,
+	.id_table =     itmtouch_ids,
+};
+
+static int __init itmtouch_init(void)
+{
+	info(DRIVER_DESC " " DRIVER_VERSION);
+	info(DRIVER_AUTHOR);
+	return usb_register(&itmtouch_driver);
+}
+
+static void __exit itmtouch_exit(void)
+{
+	usb_deregister(&itmtouch_driver);
+}
+
+module_init(itmtouch_init);
+module_exit(itmtouch_exit);
diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c
index a68c5b4..d2f0f90 100644
--- a/drivers/usb/input/kbtab.c
+++ b/drivers/usb/input/kbtab.c
@@ -36,7 +36,6 @@ struct kbtab {
 	struct input_dev dev;
 	struct usb_device *usbdev;
 	struct urb *irq;
-	int open;
 	int x, y;
 	int button;
 	int pressure;
@@ -79,12 +78,12 @@ static void kbtab_irq(struct urb *urb, struct pt_regs *regs)
 	/*input_report_key(dev, BTN_TOUCH , data[0] & 0x01);*/
 	input_report_key(dev, BTN_RIGHT, data[0] & 0x02);
 
-	if( -1 == kb_pressure_click){ 
+	if (-1 == kb_pressure_click) {
 		input_report_abs(dev, ABS_PRESSURE, kbtab->pressure);
 	} else {
 		input_report_key(dev, BTN_LEFT, (kbtab->pressure > kb_pressure_click) ? 1 : 0);
 	};
-	
+
 	input_sync(dev);
 
  exit:
@@ -105,14 +104,9 @@ static int kbtab_open(struct input_dev *dev)
 {
 	struct kbtab *kbtab = dev->private;
 
-	if (kbtab->open++)
-		return 0;
-
 	kbtab->irq->dev = kbtab->usbdev;
-	if (usb_submit_urb(kbtab->irq, GFP_KERNEL)) {
-		kbtab->open--;
+	if (usb_submit_urb(kbtab->irq, GFP_KERNEL))
 		return -EIO;
-	}
 
 	return 0;
 }
@@ -121,8 +115,7 @@ static void kbtab_close(struct input_dev *dev)
 {
 	struct kbtab *kbtab = dev->private;
 
-	if (!--kbtab->open)
-		usb_kill_urb(kbtab->irq);
+	usb_kill_urb(kbtab->irq);
 }
 
 static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *id)
@@ -161,7 +154,7 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 	kbtab->dev.absmax[ABS_X] = 0x2000;
 	kbtab->dev.absmax[ABS_Y] = 0x1750;
 	kbtab->dev.absmax[ABS_PRESSURE] = 0xff;
-	
+
 	kbtab->dev.absfuzz[ABS_X] = 4;
 	kbtab->dev.absfuzz[ABS_Y] = 4;
 
diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
index ab1a2a3..09b5cc7 100644
--- a/drivers/usb/input/mtouchusb.c
+++ b/drivers/usb/input/mtouchusb.c
@@ -42,9 +42,9 @@
 #include <linux/config.h>
 
 #ifdef CONFIG_USB_DEBUG
-        #define DEBUG
+	#define DEBUG
 #else
-        #undef DEBUG
+	#undef DEBUG
 #endif
 
 #include <linux/kernel.h>
@@ -93,275 +93,255 @@ module_param(raw_coordinates, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(raw_coordinates, "report raw coordinate values (y, default) or hardware-calibrated coordinate values (n)");
 
 struct mtouch_usb {
-        unsigned char *data;
-        dma_addr_t data_dma;
-        struct urb *irq;
-        struct usb_device *udev;
-        struct input_dev input;
-        int open;
-        char name[128];
-        char phys[64];
+	unsigned char *data;
+	dma_addr_t data_dma;
+	struct urb *irq;
+	struct usb_device *udev;
+	struct input_dev input;
+	char name[128];
+	char phys[64];
 };
 
-static struct usb_device_id mtouchusb_devices [] = {
-        { USB_DEVICE(0x0596, 0x0001) },
-        { }
+static struct usb_device_id mtouchusb_devices[] = {
+	{ USB_DEVICE(0x0596, 0x0001) },
+	{ }
 };
 
 static void mtouchusb_irq(struct urb *urb, struct pt_regs *regs)
 {
-        struct mtouch_usb *mtouch = urb->context;
-        int retval;
-
-        switch (urb->status) {
-                case 0:
-                        /* success */
-                        break;
-                case -ETIMEDOUT:
-                        /* this urb is timing out */
-                        dbg("%s - urb timed out - was the device unplugged?",
-                            __FUNCTION__);
-                        return;
-                case -ECONNRESET:
-                case -ENOENT:
-                case -ESHUTDOWN:
-                        /* this urb is terminated, clean up */
-                        dbg("%s - urb shutting down with status: %d",
-                            __FUNCTION__, urb->status);
-                        return;
-                default:
-                        dbg("%s - nonzero urb status received: %d",
-                            __FUNCTION__, urb->status);
-                        goto exit;
-        }
-
-        input_regs(&mtouch->input, regs);
-        input_report_key(&mtouch->input, BTN_TOUCH,
-                         MTOUCHUSB_GET_TOUCHED(mtouch->data));
-        input_report_abs(&mtouch->input, ABS_X,
-                         MTOUCHUSB_GET_XC(mtouch->data));
-        input_report_abs(&mtouch->input, ABS_Y,
+	struct mtouch_usb *mtouch = urb->context;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ETIMEDOUT:
+		/* this urb is timing out */
+		dbg("%s - urb timed out - was the device unplugged?",
+		    __FUNCTION__);
+		return;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+		    __FUNCTION__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d",
+		    __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	input_regs(&mtouch->input, regs);
+	input_report_key(&mtouch->input, BTN_TOUCH,
+			 MTOUCHUSB_GET_TOUCHED(mtouch->data));
+	input_report_abs(&mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data));
+	input_report_abs(&mtouch->input, ABS_Y,
 			 (raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC)
-                         - MTOUCHUSB_GET_YC(mtouch->data));
-        input_sync(&mtouch->input);
+			 - MTOUCHUSB_GET_YC(mtouch->data));
+	input_sync(&mtouch->input);
 
 exit:
-        retval = usb_submit_urb (urb, GFP_ATOMIC);
-        if (retval)
-                err ("%s - usb_submit_urb failed with result: %d",
-                     __FUNCTION__, retval);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		err("%s - usb_submit_urb failed with result: %d",
+		    __FUNCTION__, retval);
 }
 
-static int mtouchusb_open (struct input_dev *input)
+static int mtouchusb_open(struct input_dev *input)
 {
-        struct mtouch_usb *mtouch = input->private;
+	struct mtouch_usb *mtouch = input->private;
 
-        if (mtouch->open++)
-                return 0;
+	mtouch->irq->dev = mtouch->udev;
 
-        mtouch->irq->dev = mtouch->udev;
+	if (usb_submit_urb(mtouch->irq, GFP_ATOMIC))
+		return -EIO;
 
-        if (usb_submit_urb (mtouch->irq, GFP_ATOMIC)) {
-                mtouch->open--;
-                return -EIO;
-        }
-
-        return 0;
+	return 0;
 }
 
-static void mtouchusb_close (struct input_dev *input)
+static void mtouchusb_close(struct input_dev *input)
 {
-        struct mtouch_usb *mtouch = input->private;
+	struct mtouch_usb *mtouch = input->private;
 
-        if (!--mtouch->open)
-                usb_kill_urb (mtouch->irq);
+	usb_kill_urb(mtouch->irq);
 }
 
 static int mtouchusb_alloc_buffers(struct usb_device *udev, struct mtouch_usb *mtouch)
 {
-        dbg("%s - called", __FUNCTION__);
+	dbg("%s - called", __FUNCTION__);
 
-        mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_DATA_SIZE,
-                                        SLAB_ATOMIC, &mtouch->data_dma);
+	mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_DATA_SIZE,
+					SLAB_ATOMIC, &mtouch->data_dma);
 
-        if (!mtouch->data)
-                return -1;
+	if (!mtouch->data)
+		return -1;
 
-        return 0;
+	return 0;
 }
 
 static void mtouchusb_free_buffers(struct usb_device *udev, struct mtouch_usb *mtouch)
 {
-        dbg("%s - called", __FUNCTION__);
+	dbg("%s - called", __FUNCTION__);
 
-        if (mtouch->data)
-                usb_buffer_free(udev, MTOUCHUSB_REPORT_DATA_SIZE,
-                                mtouch->data, mtouch->data_dma);
+	if (mtouch->data)
+		usb_buffer_free(udev, MTOUCHUSB_REPORT_DATA_SIZE,
+				mtouch->data, mtouch->data_dma);
 }
 
 static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
-        struct mtouch_usb *mtouch;
-        struct usb_host_interface *interface;
-        struct usb_endpoint_descriptor *endpoint;
-        struct usb_device *udev = interface_to_usbdev (intf);
-        char path[64];
-        int nRet;
-
-        dbg("%s - called", __FUNCTION__);
-
-        dbg("%s - setting interface", __FUNCTION__);
-        interface = intf->cur_altsetting;
-
-        dbg("%s - setting endpoint", __FUNCTION__);
-        endpoint = &interface->endpoint[0].desc;
-
-        if (!(mtouch = kmalloc (sizeof (struct mtouch_usb), GFP_KERNEL))) {
-                err("%s - Out of memory.", __FUNCTION__);
-                return -ENOMEM;
-        }
-
-        memset(mtouch, 0, sizeof(struct mtouch_usb));
-        mtouch->udev = udev;
-
-        dbg("%s - allocating buffers", __FUNCTION__);
-        if (mtouchusb_alloc_buffers(udev, mtouch)) {
-                mtouchusb_free_buffers(udev, mtouch);
-                kfree(mtouch);
-                return -ENOMEM;
-        }
-
-        mtouch->input.private = mtouch;
-        mtouch->input.open = mtouchusb_open;
-        mtouch->input.close = mtouchusb_close;
-
-        usb_make_path(udev, path, 64);
-        sprintf(mtouch->phys, "%s/input0", path);
-
-        mtouch->input.name = mtouch->name;
-        mtouch->input.phys = mtouch->phys;
-        mtouch->input.id.bustype = BUS_USB;
-        mtouch->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
-        mtouch->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
-        mtouch->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
-        mtouch->input.dev = &intf->dev;
-
-        mtouch->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-        mtouch->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
-        mtouch->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
-        /* Used to Scale Compensated Data and Flip Y */
-        mtouch->input.absmin[ABS_X] =  MTOUCHUSB_MIN_XC;
-        mtouch->input.absmax[ABS_X] =  raw_coordinates ? \
-                                       MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC;
-        mtouch->input.absfuzz[ABS_X] = MTOUCHUSB_XC_FUZZ;
-        mtouch->input.absflat[ABS_X] = MTOUCHUSB_XC_FLAT;
-        mtouch->input.absmin[ABS_Y] =  MTOUCHUSB_MIN_YC;
-        mtouch->input.absmax[ABS_Y] =  raw_coordinates ? \
-                                       MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC;
-        mtouch->input.absfuzz[ABS_Y] = MTOUCHUSB_YC_FUZZ;
-        mtouch->input.absflat[ABS_Y] = MTOUCHUSB_YC_FLAT;
+	struct mtouch_usb *mtouch;
+	struct usb_host_interface *interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	char path[64];
+	int nRet;
+
+	dbg("%s - called", __FUNCTION__);
+
+	dbg("%s - setting interface", __FUNCTION__);
+	interface = intf->cur_altsetting;
+
+	dbg("%s - setting endpoint", __FUNCTION__);
+	endpoint = &interface->endpoint[0].desc;
+
+	if (!(mtouch = kmalloc(sizeof(struct mtouch_usb), GFP_KERNEL))) {
+		err("%s - Out of memory.", __FUNCTION__);
+		return -ENOMEM;
+	}
+
+	memset(mtouch, 0, sizeof(struct mtouch_usb));
+	mtouch->udev = udev;
+
+	dbg("%s - allocating buffers", __FUNCTION__);
+	if (mtouchusb_alloc_buffers(udev, mtouch)) {
+		mtouchusb_free_buffers(udev, mtouch);
+		kfree(mtouch);
+		return -ENOMEM;
+	}
+
+	mtouch->input.private = mtouch;
+	mtouch->input.open = mtouchusb_open;
+	mtouch->input.close = mtouchusb_close;
+
+	usb_make_path(udev, path, 64);
+	sprintf(mtouch->phys, "%s/input0", path);
+
+	mtouch->input.name = mtouch->name;
+	mtouch->input.phys = mtouch->phys;
+	mtouch->input.id.bustype = BUS_USB;
+	mtouch->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
+	mtouch->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
+	mtouch->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+	mtouch->input.dev = &intf->dev;
+
+	mtouch->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	mtouch->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+	mtouch->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
+	/* Used to Scale Compensated Data and Flip Y */
+	mtouch->input.absmin[ABS_X] = MTOUCHUSB_MIN_XC;
+	mtouch->input.absmax[ABS_X] = raw_coordinates ?
+					MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC;
+	mtouch->input.absfuzz[ABS_X] = MTOUCHUSB_XC_FUZZ;
+	mtouch->input.absflat[ABS_X] = MTOUCHUSB_XC_FLAT;
+	mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MIN_YC;
+	mtouch->input.absmax[ABS_Y] = raw_coordinates ?
+					MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC;
+	mtouch->input.absfuzz[ABS_Y] = MTOUCHUSB_YC_FUZZ;
+	mtouch->input.absflat[ABS_Y] = MTOUCHUSB_YC_FLAT;
 
 	if (udev->manufacturer)
 		strcat(mtouch->name, udev->manufacturer);
 	if (udev->product)
 		sprintf(mtouch->name, "%s %s", mtouch->name, udev->product);
 
-        if (!strlen(mtouch->name))
-                sprintf(mtouch->name, "USB Touchscreen %04x:%04x",
-                        mtouch->input.id.vendor, mtouch->input.id.product);
-
-        nRet = usb_control_msg(mtouch->udev,
-                               usb_rcvctrlpipe(udev, 0),
-                               MTOUCHUSB_RESET,
-                               USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-                               1,
-                               0,
-                               NULL,
-                               0,
-                               USB_CTRL_SET_TIMEOUT);
-        dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
-            __FUNCTION__, nRet);
-
-        dbg("%s - usb_alloc_urb: mtouch->irq", __FUNCTION__);
-        mtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
-        if (!mtouch->irq) {
-                dbg("%s - usb_alloc_urb failed: mtouch->irq", __FUNCTION__);
-                mtouchusb_free_buffers(udev, mtouch);
-                kfree(mtouch);
-                return -ENOMEM;
-        }
-
-        dbg("%s - usb_fill_int_urb", __FUNCTION__);
-        usb_fill_int_urb(mtouch->irq,
-                         mtouch->udev,
-                         usb_rcvintpipe(mtouch->udev, 0x81),
-                         mtouch->data,
-                         MTOUCHUSB_REPORT_DATA_SIZE,
-                         mtouchusb_irq,
-                         mtouch,
-                         endpoint->bInterval);
-
-        dbg("%s - input_register_device", __FUNCTION__);
-        input_register_device(&mtouch->input);
-
-        nRet = usb_control_msg(mtouch->udev,
-                               usb_rcvctrlpipe(udev, 0),
-                               MTOUCHUSB_ASYNC_REPORT,
-                               USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-                               1,
-                               1,
-                               NULL,
-                               0,
-                               USB_CTRL_SET_TIMEOUT);
-        dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
-            __FUNCTION__, nRet);
-
-        printk(KERN_INFO "input: %s on %s\n", mtouch->name, path);
-        usb_set_intfdata(intf, mtouch);
-
-        return 0;
+	if (!strlen(mtouch->name))
+		sprintf(mtouch->name, "USB Touchscreen %04x:%04x",
+			mtouch->input.id.vendor, mtouch->input.id.product);
+
+	nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0),
+			       MTOUCHUSB_RESET,
+			       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
+	    __FUNCTION__, nRet);
+
+	dbg("%s - usb_alloc_urb: mtouch->irq", __FUNCTION__);
+	mtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!mtouch->irq) {
+		dbg("%s - usb_alloc_urb failed: mtouch->irq", __FUNCTION__);
+		mtouchusb_free_buffers(udev, mtouch);
+		kfree(mtouch);
+		return -ENOMEM;
+	}
+
+	dbg("%s - usb_fill_int_urb", __FUNCTION__);
+	usb_fill_int_urb(mtouch->irq, mtouch->udev,
+			 usb_rcvintpipe(mtouch->udev, 0x81),
+			 mtouch->data, MTOUCHUSB_REPORT_DATA_SIZE,
+			 mtouchusb_irq, mtouch, endpoint->bInterval);
+
+	dbg("%s - input_register_device", __FUNCTION__);
+	input_register_device(&mtouch->input);
+
+	nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0),
+			       MTOUCHUSB_ASYNC_REPORT,
+			       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
+	    __FUNCTION__, nRet);
+
+	printk(KERN_INFO "input: %s on %s\n", mtouch->name, path);
+	usb_set_intfdata(intf, mtouch);
+
+	return 0;
 }
 
 static void mtouchusb_disconnect(struct usb_interface *intf)
 {
-        struct mtouch_usb *mtouch = usb_get_intfdata (intf);
-
-        dbg("%s - called", __FUNCTION__);
-        usb_set_intfdata(intf, NULL);
-        if (mtouch) {
-                dbg("%s - mtouch is initialized, cleaning up", __FUNCTION__);
-                usb_kill_urb(mtouch->irq);
-                input_unregister_device(&mtouch->input);
-                usb_free_urb(mtouch->irq);
-                mtouchusb_free_buffers(interface_to_usbdev(intf), mtouch);
-                kfree(mtouch);
-        }
+	struct mtouch_usb *mtouch = usb_get_intfdata(intf);
+
+	dbg("%s - called", __FUNCTION__);
+	usb_set_intfdata(intf, NULL);
+	if (mtouch) {
+		dbg("%s - mtouch is initialized, cleaning up", __FUNCTION__);
+		usb_kill_urb(mtouch->irq);
+		input_unregister_device(&mtouch->input);
+		usb_free_urb(mtouch->irq);
+		mtouchusb_free_buffers(interface_to_usbdev(intf), mtouch);
+		kfree(mtouch);
+	}
 }
 
-MODULE_DEVICE_TABLE (usb, mtouchusb_devices);
+MODULE_DEVICE_TABLE(usb, mtouchusb_devices);
 
 static struct usb_driver mtouchusb_driver = {
-        .owner =      THIS_MODULE,
-        .name =       "mtouchusb",
-        .probe =      mtouchusb_probe,
-        .disconnect = mtouchusb_disconnect,
-        .id_table =   mtouchusb_devices,
+	.owner		= THIS_MODULE,
+	.name		= "mtouchusb",
+	.probe		= mtouchusb_probe,
+	.disconnect	= mtouchusb_disconnect,
+	.id_table	= mtouchusb_devices,
 };
 
-static int __init mtouchusb_init(void) {
-        dbg("%s - called", __FUNCTION__);
-        return usb_register(&mtouchusb_driver);
+static int __init mtouchusb_init(void)
+{
+	dbg("%s - called", __FUNCTION__);
+	return usb_register(&mtouchusb_driver);
 }
 
-static void __exit mtouchusb_cleanup(void) {
-        dbg("%s - called", __FUNCTION__);
-        usb_deregister(&mtouchusb_driver);
+static void __exit mtouchusb_cleanup(void)
+{
+	dbg("%s - called", __FUNCTION__);
+	usb_deregister(&mtouchusb_driver);
 }
 
 module_init(mtouchusb_init);
 module_exit(mtouchusb_cleanup);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c
index 7fa2f9b..3975b30 100644
--- a/drivers/usb/input/powermate.c
+++ b/drivers/usb/input/powermate.c
@@ -10,7 +10,7 @@
  * back to the host when polled by the USB controller.
  *
  * Testing with the knob I have has shown that it measures approximately 94 "clicks"
- * for one full rotation. Testing with my High Speed Rotation Actuator (ok, it was 
+ * for one full rotation. Testing with my High Speed Rotation Actuator (ok, it was
  * a variable speed cordless electric drill) has shown that the device can measure
  * speeds of up to 7 clicks either clockwise or anticlockwise between pollings from
  * the host. If it counts more than 7 clicks before it is polled, it will wrap back
@@ -120,9 +120,9 @@ exit:
 /* Decide if we need to issue a control message and do so. Must be called with pm->lock taken */
 static void powermate_sync_state(struct powermate_device *pm)
 {
-	if (pm->requires_update == 0) 
+	if (pm->requires_update == 0)
 		return; /* no updates are required */
-	if (pm->config->status == -EINPROGRESS) 
+	if (pm->config->status == -EINPROGRESS)
 		return; /* an update is already in progress; it'll issue this update when it completes */
 
 	if (pm->requires_update & UPDATE_PULSE_ASLEEP){
@@ -142,7 +142,7 @@ static void powermate_sync_state(struct powermate_device *pm)
 		   2: multiply the speed
 		   the argument only has an effect for operations 0 and 2, and ranges between
 		   1 (least effect) to 255 (maximum effect).
-       
+
 		   thus, several states are equivalent and are coalesced into one state.
 
 		   we map this onto a range from 0 to 510, with:
@@ -151,7 +151,7 @@ static void powermate_sync_state(struct powermate_device *pm)
 		   256 -- 510  -- use multiple (510 = fastest).
 
 		   Only values of 'arg' quite close to 255 are particularly useful/spectacular.
-		*/    
+		*/
 		if (pm->pulse_speed < 255){
 			op = 0;                   // divide
 			arg = 255 - pm->pulse_speed;
@@ -199,14 +199,14 @@ static void powermate_config_complete(struct urb *urb, struct pt_regs *regs)
 
 	if (urb->status)
 		printk(KERN_ERR "powermate: config urb returned %d\n", urb->status);
-	
+
 	spin_lock_irqsave(&pm->lock, flags);
 	powermate_sync_state(pm);
 	spin_unlock_irqrestore(&pm->lock, flags);
 }
 
 /* Set the LED up as described and begin the sync with the hardware if required */
-static void powermate_pulse_led(struct powermate_device *pm, int static_brightness, int pulse_speed, 
+static void powermate_pulse_led(struct powermate_device *pm, int static_brightness, int pulse_speed,
 				int pulse_table, int pulse_asleep, int pulse_awake)
 {
 	unsigned long flags;
@@ -229,7 +229,7 @@ static void powermate_pulse_led(struct powermate_device *pm, int static_brightne
 	/* mark state updates which are required */
 	if (static_brightness != pm->static_brightness){
 		pm->static_brightness = static_brightness;
-		pm->requires_update |= UPDATE_STATIC_BRIGHTNESS;		
+		pm->requires_update |= UPDATE_STATIC_BRIGHTNESS;
 	}
 	if (pulse_asleep != pm->pulse_asleep){
 		pm->pulse_asleep = pulse_asleep;
@@ -246,7 +246,7 @@ static void powermate_pulse_led(struct powermate_device *pm, int static_brightne
 	}
 
 	powermate_sync_state(pm);
-   
+
 	spin_unlock_irqrestore(&pm->lock, flags);
 }
 
@@ -257,19 +257,19 @@ static int powermate_input_event(struct input_dev *dev, unsigned int type, unsig
 	struct powermate_device *pm = dev->private;
 
 	if (type == EV_MSC && code == MSC_PULSELED){
-		/*  
+		/*
 		    bits  0- 7: 8 bits: LED brightness
 		    bits  8-16: 9 bits: pulsing speed modifier (0 ... 510); 0-254 = slower, 255 = standard, 256-510 = faster.
 		    bits 17-18: 2 bits: pulse table (0, 1, 2 valid)
 		    bit     19: 1 bit : pulse whilst asleep?
 		    bit     20: 1 bit : pulse constantly?
-		*/  
+		*/
 		int static_brightness = command & 0xFF;   // bits 0-7
 		int pulse_speed = (command >> 8) & 0x1FF; // bits 8-16
 		int pulse_table = (command >> 17) & 0x3;  // bits 17-18
 		int pulse_asleep = (command >> 19) & 0x1; // bit 19
 		int pulse_awake  = (command >> 20) & 0x1; // bit 20
-  
+
 		powermate_pulse_led(pm, static_brightness, pulse_speed, pulse_table, pulse_asleep, pulse_awake);
 	}
 
@@ -378,7 +378,7 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
 	switch (le16_to_cpu(udev->descriptor.idProduct)) {
 	case POWERMATE_PRODUCT_NEW: pm->input.name = pm_name_powermate; break;
 	case POWERMATE_PRODUCT_OLD: pm->input.name = pm_name_soundknob; break;
-	default: 
+	default:
 		pm->input.name = pm_name_soundknob;
 		printk(KERN_WARNING "powermate: unknown product id %04x\n",
 		       le16_to_cpu(udev->descriptor.idProduct));
@@ -402,11 +402,11 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
 	usb_make_path(udev, path, 64);
 	snprintf(pm->phys, 64, "%s/input0", path);
 	printk(KERN_INFO "input: %s on %s\n", pm->input.name, pm->input.phys);
-	
+
 	/* force an update of everything */
 	pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS;
 	powermate_pulse_led(pm, 0x80, 255, 0, 1, 0); // set default pulse parameters
-  
+
 	usb_set_intfdata(intf, pm);
 	return 0;
 }
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index a71f1bb..386595e 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -69,7 +69,6 @@ struct touchkit_usb {
 	struct urb *irq;
 	struct usb_device *udev;
 	struct input_dev input;
-	int open;
 	char name[128];
 	char phys[64];
 };
@@ -134,15 +133,10 @@ static int touchkit_open(struct input_dev *input)
 {
 	struct touchkit_usb *touchkit = input->private;
 
-	if (touchkit->open++)
-		return 0;
-
 	touchkit->irq->dev = touchkit->udev;
 
-	if (usb_submit_urb(touchkit->irq, GFP_ATOMIC)) {
-		touchkit->open--;
+	if (usb_submit_urb(touchkit->irq, GFP_ATOMIC))
 		return -EIO;
-	}
 
 	return 0;
 }
@@ -151,8 +145,7 @@ static void touchkit_close(struct input_dev *input)
 {
 	struct touchkit_usb *touchkit = input->private;
 
-	if (!--touchkit->open)
-		usb_kill_urb(touchkit->irq);
+	usb_kill_urb(touchkit->irq);
 }
 
 static int touchkit_alloc_buffers(struct usb_device *udev,
diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c
index 7038fb9..f35db19 100644
--- a/drivers/usb/input/usbkbd.c
+++ b/drivers/usb/input/usbkbd.c
@@ -9,18 +9,18 @@
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or 
+ * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- * 
+ *
  * Should you need to contact me, the author, you can do so either by
  * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
@@ -72,7 +72,6 @@ struct usb_kbd {
 	unsigned char newleds;
 	char name[128];
 	char phys[64];
-	int open;
 
 	unsigned char *new;
 	struct usb_ctrlrequest *cr;
@@ -166,7 +165,7 @@ static void usb_kbd_led(struct urb *urb, struct pt_regs *regs)
 
 	if (urb->status)
 		warn("led urb status %d received", urb->status);
-	
+
 	if (*(kbd->leds) == kbd->newleds)
 		return;
 
@@ -180,14 +179,9 @@ static int usb_kbd_open(struct input_dev *dev)
 {
 	struct usb_kbd *kbd = dev->private;
 
-	if (kbd->open++)
-		return 0;
-
 	kbd->irq->dev = kbd->usbdev;
-	if (usb_submit_urb(kbd->irq, GFP_KERNEL)) {
-		kbd->open--;
+	if (usb_submit_urb(kbd->irq, GFP_KERNEL))
 		return -EIO;
-	}
 
 	return 0;
 }
@@ -196,8 +190,7 @@ static void usb_kbd_close(struct input_dev *dev)
 {
 	struct usb_kbd *kbd = dev->private;
 
-	if (!--kbd->open)
-		usb_kill_urb(kbd->irq);
+	usb_kill_urb(kbd->irq);
 }
 
 static int usb_kbd_alloc_mem(struct usb_device *dev, struct usb_kbd *kbd)
@@ -230,7 +223,7 @@ static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd)
 		usb_buffer_free(dev, 1, kbd->leds, kbd->leds_dma);
 }
 
-static int usb_kbd_probe(struct usb_interface *iface, 
+static int usb_kbd_probe(struct usb_interface *iface,
 			 const struct usb_device_id *id)
 {
 	struct usb_device * dev = interface_to_usbdev(iface);
@@ -272,7 +265,7 @@ static int usb_kbd_probe(struct usb_interface *iface,
 	for (i = 0; i < 255; i++)
 		set_bit(usb_kbd_keycode[i], kbd->dev.keybit);
 	clear_bit(0, kbd->dev.keybit);
-	
+
 	kbd->dev.private = kbd;
 	kbd->dev.event = usb_kbd_event;
 	kbd->dev.open = usb_kbd_open;
@@ -294,7 +287,7 @@ static int usb_kbd_probe(struct usb_interface *iface,
 	sprintf(kbd->phys, "%s/input0", path);
 
 	kbd->dev.name = kbd->name;
-	kbd->dev.phys = kbd->phys;	
+	kbd->dev.phys = kbd->phys;
 	kbd->dev.id.bustype = BUS_USB;
 	kbd->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
 	kbd->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
@@ -329,7 +322,7 @@ static int usb_kbd_probe(struct usb_interface *iface,
 static void usb_kbd_disconnect(struct usb_interface *intf)
 {
 	struct usb_kbd *kbd = usb_get_intfdata (intf);
-	
+
 	usb_set_intfdata(intf, NULL);
 	if (kbd) {
 		usb_kill_urb(kbd->irq);
diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c
index 01155bb..1ec41b5 100644
--- a/drivers/usb/input/usbmouse.c
+++ b/drivers/usb/input/usbmouse.c
@@ -9,18 +9,18 @@
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or 
+ * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- * 
+ *
  * Should you need to contact me, the author, you can do so either by
  * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
@@ -51,7 +51,6 @@ struct usb_mouse {
 	struct usb_device *usbdev;
 	struct input_dev dev;
 	struct urb *irq;
-	int open;
 
 	signed char *data;
 	dma_addr_t data_dma;
@@ -101,14 +100,9 @@ static int usb_mouse_open(struct input_dev *dev)
 {
 	struct usb_mouse *mouse = dev->private;
 
-	if (mouse->open++)
-		return 0;
-
 	mouse->irq->dev = mouse->usbdev;
-	if (usb_submit_urb(mouse->irq, GFP_KERNEL)) {
-		mouse->open--;
+	if (usb_submit_urb(mouse->irq, GFP_KERNEL))
 		return -EIO;
-	}
 
 	return 0;
 }
@@ -117,8 +111,7 @@ static void usb_mouse_close(struct input_dev *dev)
 {
 	struct usb_mouse *mouse = dev->private;
 
-	if (!--mouse->open)
-		usb_kill_urb(mouse->irq);
+	usb_kill_urb(mouse->irq);
 }
 
 static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_id * id)
@@ -132,19 +125,19 @@ static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_
 
 	interface = intf->cur_altsetting;
 
-	if (interface->desc.bNumEndpoints != 1) 
+	if (interface->desc.bNumEndpoints != 1)
 		return -ENODEV;
 
 	endpoint = &interface->endpoint[0].desc;
-	if (!(endpoint->bEndpointAddress & 0x80)) 
+	if (!(endpoint->bEndpointAddress & 0x80))
 		return -ENODEV;
-	if ((endpoint->bmAttributes & 3) != 3) 
+	if ((endpoint->bmAttributes & 3) != 3)
 		return -ENODEV;
 
 	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
 	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
 
-	if (!(mouse = kmalloc(sizeof(struct usb_mouse), GFP_KERNEL))) 
+	if (!(mouse = kmalloc(sizeof(struct usb_mouse), GFP_KERNEL)))
 		return -ENOMEM;
 	memset(mouse, 0, sizeof(struct usb_mouse));
 
@@ -209,7 +202,7 @@ static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_
 static void usb_mouse_disconnect(struct usb_interface *intf)
 {
 	struct usb_mouse *mouse = usb_get_intfdata (intf);
-	
+
 	usb_set_intfdata(intf, NULL);
 	if (mouse) {
 		usb_kill_urb(mouse->irq);
@@ -238,7 +231,7 @@ static struct usb_driver usb_mouse_driver = {
 static int __init usb_mouse_init(void)
 {
 	int retval = usb_register(&usb_mouse_driver);
-	if (retval == 0) 
+	if (retval == 0)
 		info(DRIVER_VERSION ":" DRIVER_DESC);
 	return retval;
 }
diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c
index fec04dd..f6b34af 100644
--- a/drivers/usb/input/wacom.c
+++ b/drivers/usb/input/wacom.c
@@ -9,7 +9,7 @@
  *  Copyright (c) 2000 Daniel Egger		<egger@suse.de>
  *  Copyright (c) 2001 Frederic Lepied		<flepied@mandrakesoft.com>
  *  Copyright (c) 2004 Panagiotis Issaris	<panagiotis.issaris@mech.kuleuven.ac.be>
- *  Copyright (c) 2002-2004 Ping Cheng		<pingc@wacom.com>
+ *  Copyright (c) 2002-2005 Ping Cheng		<pingc@wacom.com>
  *
  *  ChangeLog:
  *      v0.1 (vp)  - Initial release
@@ -18,7 +18,7 @@
  *	v0.4 (sm)  - Support for more Intuos models, menustrip
  *			relative mode, proximity.
  *	v0.5 (vp)  - Big cleanup, nifty features removed,
- * 			they belong in userspace
+ *			they belong in userspace
  *	v1.8 (vp)  - Submit URB only when operating, moved to CVS,
  *			use input_report_key instead of report_btn and
  *			other cleanups
@@ -51,6 +51,9 @@
  *		   - Cleanups here and there
  *    v1.30.1 (pi) - Added Graphire3 support
  *	v1.40 (pc) - Add support for several new devices, fix eraser reporting, ...
+ *	v1.43 (pc) - Added support for Cintiq 21UX
+		   - Fixed a Graphire bug
+		   - Merged wacom_intuos3_irq into wacom_intuos_irq
  */
 
 /*
@@ -72,7 +75,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.40"
+#define DRIVER_VERSION "v1.43"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
 #define DRIVER_LICENSE "GPL"
@@ -83,6 +86,16 @@ MODULE_LICENSE(DRIVER_LICENSE);
 
 #define USB_VENDOR_ID_WACOM	0x056a
 
+enum {
+	PENPARTNER = 0,
+	GRAPHIRE,
+	PL,
+	INTUOS,
+	INTUOS3,
+	CINTIQ,
+	MAX_TYPE
+};
+
 struct wacom_features {
 	char *name;
 	int pktlen;
@@ -102,7 +115,6 @@ struct wacom {
 	struct urb *irq;
 	struct wacom_features *features;
 	int tool[2];
-	int open;
 	__u32 serial[2];
 	char phys[32];
 };
@@ -149,7 +161,7 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs)
 	prox = data[1] & 0x40;
 
 	input_regs(dev, regs);
-	
+
 	if (prox) {
 
 		pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
@@ -166,8 +178,7 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs)
 		if (!wacom->tool[0]) {
 			/* Going into proximity select tool */
 			wacom->tool[1] = (data[4] & 0x20)? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-		}
-		else {
+		} else {
 			/* was entered with stylus2 pressed */
 			if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20) ) {
 				/* report out proximity for previous tool */
@@ -182,16 +193,15 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs)
 			wacom->tool[1] = BTN_TOOL_PEN;
 		}
 		input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */
-		input_report_abs(dev, ABS_X, data[3] | ((__u32)data[2] << 7) | ((__u32)(data[1] & 0x03) << 14));
-		input_report_abs(dev, ABS_Y, data[6] | ((__u32)data[5] << 7) | ((__u32)(data[4] & 0x03) << 14));
+		input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
+		input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
 		input_report_abs(dev, ABS_PRESSURE, pressure);
 
 		input_report_key(dev, BTN_TOUCH, data[4] & 0x08);
 		input_report_key(dev, BTN_STYLUS, data[4] & 0x10);
 		/* Only allow the stylus2 button to be reported for the pen tool. */
 		input_report_key(dev, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
-	}
-	else {
+	} else {
 		/* report proximity-out of a (valid) tool */
 		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
 			/* Unknown tool selected default to pen tool */
@@ -203,7 +213,7 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs)
 	wacom->tool[0] = prox; /* Save proximity state */
 	input_sync(dev);
 
-exit:
+ exit:
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
@@ -232,20 +242,16 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs)
 		goto exit;
 	}
 
-	if (data[0] != 2)
-	{
+	if (data[0] != 2) {
 		printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
 		goto exit;
 	}
 
 	input_regs(dev, regs);
-	if (data[1] & 0x04)
-	{
+	if (data[1] & 0x04) {
 		input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20);
 		input_report_key(dev, BTN_TOUCH, data[1] & 0x08);
-	}
-	else
-	{
+	} else {
 		input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20);
 		input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
 	}
@@ -257,7 +263,7 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs)
 
 	input_sync(dev);
 
-exit:
+ exit:
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
@@ -300,7 +306,7 @@ static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs)
 	input_report_key(dev, BTN_STYLUS, (data[5] & 0x40));
 	input_sync(dev);
 
-exit:
+ exit:
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
@@ -340,47 +346,47 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 
 	input_regs(dev, regs);
 
-	switch ((data[1] >> 5) & 3) {
+	if (data[1] & 0x10) { /* in prox */
 
-		case 0:	/* Pen */
-			input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x80);
-			break;
+		switch ((data[1] >> 5) & 3) {
 
-		case 1: /* Rubber */
-			input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x80);
-			break;
-
-		case 2: /* Mouse with wheel */
-			input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
-			input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
-			/* fall through */
+			case 0:	/* Pen */
+				wacom->tool[0] = BTN_TOOL_PEN;
+				break;
 
-                case 3: /* Mouse without wheel */
-			input_report_key(dev, BTN_TOOL_MOUSE, data[7] > 24);
-			input_report_key(dev, BTN_LEFT, data[1] & 0x01);
-			input_report_key(dev, BTN_RIGHT, data[1] & 0x02);
-			input_report_abs(dev, ABS_DISTANCE, data[7]);
+			case 1: /* Rubber */
+				wacom->tool[0] = BTN_TOOL_RUBBER;
+				break;
 
-			input_report_abs(dev, ABS_X, x);
-			input_report_abs(dev, ABS_Y, y);
+			case 2: /* Mouse with wheel */
+				input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
+				input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
+				/* fall through */
 
-			input_sync(dev);
-			goto exit;
+			case 3: /* Mouse without wheel */
+				wacom->tool[0] = BTN_TOOL_MOUSE;
+				input_report_key(dev, BTN_LEFT, data[1] & 0x01);
+				input_report_key(dev, BTN_RIGHT, data[1] & 0x02);
+				input_report_abs(dev, ABS_DISTANCE, data[7]);
+				break;
+		}
 	}
 
 	if (data[1] & 0x80) {
 		input_report_abs(dev, ABS_X, x);
 		input_report_abs(dev, ABS_Y, y);
 	}
+	if (wacom->tool[0] != BTN_TOOL_MOUSE) {
+		input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
+		input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
+		input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
+		input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
+	}
 
-	input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
-	input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
-	input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
-	input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
-
+	input_report_key(dev, wacom->tool[0], data[1] & 0x10);
 	input_sync(dev);
 
-exit:
+ exit:
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
@@ -398,14 +404,13 @@ static int wacom_intuos_inout(struct urb *urb)
 	idx = data[1] & 0x01;
 
 	/* Enter report */
-	if ((data[1] & 0xfc) == 0xc0)
-	{
+	if ((data[1] & 0xfc) == 0xc0) {
 		/* serial number of the tool */
-		wacom->serial[idx] = ((__u32)(data[3] & 0x0f) << 28) +
-			((__u32)data[4] << 20) + ((__u32)data[5] << 12) +
-			((__u32)data[6] << 4) + (data[7] >> 4);
+		wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
+			(data[4] << 20) + (data[5] << 12) +
+			(data[6] << 4) + (data[7] >> 4);
 
-		switch (((__u32)data[2] << 4) | (data[3] >> 4)) {
+		switch ((data[2] << 4) | (data[3] >> 4)) {
 			case 0x812: /* Inking pen */
 			case 0x801: /* Intuos3 Inking pen */
 			case 0x012:
@@ -449,7 +454,7 @@ static int wacom_intuos_inout(struct urb *urb)
 			case 0x112:
 			case 0x913: /* Intuos3 Airbrush */
 				wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
-				break;	/* Airbrush */
+				break;
 			default: /* Unknown tool */
 				wacom->tool[idx] = BTN_TOOL_PEN;
 		}
@@ -478,9 +483,8 @@ static void wacom_intuos_general(struct urb *urb)
 	unsigned int t;
 
 	/* general pen packet */
-	if ((data[1] & 0xb8) == 0xa0)
-	{
-		t = ((__u32)data[6] << 2) | ((data[7] >> 6) & 3);
+	if ((data[1] & 0xb8) == 0xa0) {
+		t = (data[6] << 2) | ((data[7] >> 6) & 3);
 		input_report_abs(dev, ABS_PRESSURE, t);
 		input_report_abs(dev, ABS_TILT_X,
 				((data[7] << 1) & 0x7e) | (data[8] >> 7));
@@ -491,10 +495,9 @@ static void wacom_intuos_general(struct urb *urb)
 	}
 
 	/* airbrush second packet */
-	if ((data[1] & 0xbc) == 0xb4)
-	{
+	if ((data[1] & 0xbc) == 0xb4) {
 		input_report_abs(dev, ABS_WHEEL,
-				((__u32)data[6] << 2) | ((data[7] >> 6) & 3));
+				(data[6] << 2) | ((data[7] >> 6) & 3));
 		input_report_abs(dev, ABS_TILT_X,
 				((data[7] << 1) & 0x7e) | (data[8] >> 7));
 		input_report_abs(dev, ABS_TILT_Y, data[8] & 0x7f);
@@ -526,7 +529,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 		goto exit;
 	}
 
-	if (data[0] != 2 && data[0] != 5 && data[0] != 6) {
+	if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) {
 		dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
 		goto exit;
 	}
@@ -536,107 +539,10 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 	/* tool number */
 	idx = data[1] & 0x01;
 
-	/* process in/out prox events */
-	if (wacom_intuos_inout(urb)) goto exit;
-
-	input_report_abs(dev, ABS_X, be16_to_cpu(*(__be16 *) &data[2]));
-	input_report_abs(dev, ABS_Y, be16_to_cpu(*(__be16 *) &data[4]));
-	input_report_abs(dev, ABS_DISTANCE, data[9]);
-
-	/* process general packets */
-	wacom_intuos_general(urb);
-	
-	if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) {		/* 4D mouse or Lens cursor packets */
-
-		if (data[1] & 0x02) {						/* Rotation packet */
-
-			t = ((__u32)data[6] << 3) | ((data[7] >> 5) & 7);
-			input_report_abs(dev, ABS_RZ, (data[7] & 0x20) ? ((t - 1) / 2) : -t / 2);
-
-		} else {
-
-	 		if ((data[1] & 0x10) == 0) {				/* 4D mouse packets */
-
-				input_report_key(dev, BTN_LEFT,   data[8] & 0x01);
-				input_report_key(dev, BTN_MIDDLE, data[8] & 0x02);
-				input_report_key(dev, BTN_RIGHT,  data[8] & 0x04);
-
-				input_report_key(dev, BTN_SIDE,   data[8] & 0x20);
-				input_report_key(dev, BTN_EXTRA,  data[8] & 0x10);
-				t = ((__u32)data[6] << 2) | ((data[7] >> 6) & 3);
-				input_report_abs(dev, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
-
-			} else {
-				if (wacom->tool[idx] == BTN_TOOL_MOUSE) {	/* 2D mouse packets */	
-					input_report_key(dev, BTN_LEFT,   data[8] & 0x04);
-					input_report_key(dev, BTN_MIDDLE, data[8] & 0x08);
-					input_report_key(dev, BTN_RIGHT,  data[8] & 0x10);
-					input_report_rel(dev, REL_WHEEL, 
-					    (-(__u32)(data[8] & 0x01) + (__u32)((data[8] & 0x02) >> 1)));
-				}
-				else {     /* Lens cursor packets */
-					input_report_key(dev, BTN_LEFT,   data[8] & 0x01);
-					input_report_key(dev, BTN_MIDDLE, data[8] & 0x02);
-					input_report_key(dev, BTN_RIGHT,  data[8] & 0x04);
-					input_report_key(dev, BTN_SIDE,   data[8] & 0x10);
-					input_report_key(dev, BTN_EXTRA,  data[8] & 0x08);
-				}
-			}
-		}
-	}
-	
-	input_report_key(dev, wacom->tool[idx], 1);
-	input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
-	input_sync(dev);
-
-exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
-	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, retval);
-}
-
-static void wacom_intuos3_irq(struct urb *urb, struct pt_regs *regs)
-{
-	struct wacom *wacom = urb->context;
-	unsigned char *data = wacom->data;
-	struct input_dev *dev = &wacom->dev;
-	unsigned int t;
-	int idx, retval;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
-		goto exit;
-	}
-
-	/* check for valid report */
-	if (data[0] != 2 && data[0] != 5 && data[0] != 12)
-	{
-		printk(KERN_INFO "wacom_intuos3_irq: received unknown report #%d\n", data[0]);
-		goto exit;
-	}
-
-	input_regs(dev, regs);
-
-	/* tool index is always 0 here since there is no dual input tool */
-	idx = data[1] & 0x01;
-
 	/* pad packets. Works as a second tool and is always in prox */
-	if (data[0] == 12)
-	{
+	if (data[0] == 12) {
 		/* initiate the pad as a device */
-		if (wacom->tool[1] != BTN_TOOL_FINGER)
-		{
+		if (wacom->tool[1] != BTN_TOOL_FINGER) {
 			wacom->tool[1] = BTN_TOOL_FINGER;
 			input_report_key(dev, wacom->tool[1], 1);
 		}
@@ -656,37 +562,78 @@ static void wacom_intuos3_irq(struct urb *urb, struct pt_regs *regs)
 	}
 
 	/* process in/out prox events */
-	if (wacom_intuos_inout(urb)) goto exit;
+	if (wacom_intuos_inout(urb))
+		goto exit;
 
-	input_report_abs(dev, ABS_X, ((__u32)data[2] << 9) | ((__u32)data[3] << 1) | ((data[9] >> 1) & 1));
-	input_report_abs(dev, ABS_Y, ((__u32)data[4] << 9) | ((__u32)data[5] << 1) | (data[9] & 1));
-	input_report_abs(dev, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
+	/* Cintiq doesn't send data when RDY bit isn't set */
+	if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
+		return;
+
+	if (wacom->features->type >= INTUOS3) {
+		input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
+		input_report_abs(dev, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
+		input_report_abs(dev, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
+	} else {
+		input_report_abs(dev, ABS_X, be16_to_cpu(*(__be16 *) &data[2]));
+		input_report_abs(dev, ABS_Y, be16_to_cpu(*(__be16 *) &data[4]));
+		input_report_abs(dev, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
+	}
 
 	/* process general packets */
 	wacom_intuos_general(urb);
 
-	if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0)
-	{
-		/* Marker pen rotation packet. Reported as wheel due to valuator limitation */
-		if (data[1] & 0x02)
-		{
-			t = ((__u32)data[6] << 3) | ((data[7] >> 5) & 7);
-			t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
-				((t-1) / 2 + 450)) : (450 - t / 2) ;
-			input_report_abs(dev, ABS_WHEEL, t);
-		}
+	/* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */
+	if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) {
+
+		if (data[1] & 0x02) {
+			/* Rotation packet */
+			if (wacom->features->type >= INTUOS3) {
+				/* I3 marker pen rotation reported as wheel
+				 * due to valuator limitation
+				 */
+				t = (data[6] << 3) | ((data[7] >> 5) & 7);
+				t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
+					((t-1) / 2 + 450)) : (450 - t / 2) ;
+				input_report_abs(dev, ABS_WHEEL, t);
+			} else {
+				/* 4D mouse rotation packet */
+				t = (data[6] << 3) | ((data[7] >> 5) & 7);
+				input_report_abs(dev, ABS_RZ, (data[7] & 0x20) ?
+					((t - 1) / 2) : -t / 2);
+			}
 
-		/* 2D mouse packets */
-		if (wacom->tool[idx] == BTN_TOOL_MOUSE)
-		{
+		} else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3) {
+			/* 4D mouse packet */
+			input_report_key(dev, BTN_LEFT,   data[8] & 0x01);
+			input_report_key(dev, BTN_MIDDLE, data[8] & 0x02);
+			input_report_key(dev, BTN_RIGHT,  data[8] & 0x04);
+
+			input_report_key(dev, BTN_SIDE,   data[8] & 0x20);
+			input_report_key(dev, BTN_EXTRA,  data[8] & 0x10);
+			t = (data[6] << 2) | ((data[7] >> 6) & 3);
+			input_report_abs(dev, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
+
+		} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
+			/* 2D mouse packet */
 			input_report_key(dev, BTN_LEFT,   data[8] & 0x04);
 			input_report_key(dev, BTN_MIDDLE, data[8] & 0x08);
 			input_report_key(dev, BTN_RIGHT,  data[8] & 0x10);
-			input_report_key(dev, BTN_SIDE,   data[8] & 0x40);
-			input_report_key(dev, BTN_EXTRA,  data[8] & 0x20);
-			/* mouse wheel is positive when rolled backwards */
-			input_report_rel(dev, REL_WHEEL,  ((__u32)((data[8] & 0x02) >> 1)
-					 - (__u32)(data[8] & 0x01)));
+			input_report_rel(dev, REL_WHEEL, ((data[8] & 0x02) >> 1)
+						 - (data[8] & 0x01));
+
+			/* I3 2D mouse side buttons */
+			if (wacom->features->type == INTUOS3) {
+				input_report_key(dev, BTN_SIDE,   data[8] & 0x40);
+				input_report_key(dev, BTN_EXTRA,  data[8] & 0x20);
+			}
+
+		} else if (wacom->features->type < INTUOS3) {
+			/* Lens cursor packets */
+			input_report_key(dev, BTN_LEFT,   data[8] & 0x01);
+			input_report_key(dev, BTN_MIDDLE, data[8] & 0x02);
+			input_report_key(dev, BTN_RIGHT,  data[8] & 0x04);
+			input_report_key(dev, BTN_SIDE,   data[8] & 0x10);
+			input_report_key(dev, BTN_EXTRA,  data[8] & 0x08);
 		}
 	}
 
@@ -702,35 +649,36 @@ exit:
 }
 
 static struct wacom_features wacom_features[] = {
-	{ "Wacom Penpartner",    7,   5040,  3780,  255, 32, 0, wacom_penpartner_irq },
-        { "Wacom Graphire",      8,  10206,  7422,  511, 32, 1, wacom_graphire_irq },
-	{ "Wacom Graphire2 4x5", 8,  10206,  7422,  511, 32, 1, wacom_graphire_irq },
- 	{ "Wacom Graphire2 5x7", 8,  13918, 10206,  511, 32, 1, wacom_graphire_irq },
-	{ "Wacom Graphire3",     8,  10208,  7424,  511, 32, 1, wacom_graphire_irq },
-	{ "Wacom Graphire3 6x8", 8,  16704, 12064,  511, 32, 1, wacom_graphire_irq },
-  	{ "Wacom Intuos 4x5",   10,  12700, 10600, 1023, 15, 2, wacom_intuos_irq },
- 	{ "Wacom Intuos 6x8",   10,  20320, 16240, 1023, 15, 2, wacom_intuos_irq },
- 	{ "Wacom Intuos 9x12",  10,  30480, 24060, 1023, 15, 2, wacom_intuos_irq },
- 	{ "Wacom Intuos 12x12", 10,  30480, 31680, 1023, 15, 2, wacom_intuos_irq },
- 	{ "Wacom Intuos 12x18", 10,  45720, 31680, 1023, 15, 2, wacom_intuos_irq },
- 	{ "Wacom PL400",         8,   5408,  4056,  255, 32, 3, wacom_pl_irq },
- 	{ "Wacom PL500",         8,   6144,  4608,  255, 32, 3, wacom_pl_irq },
- 	{ "Wacom PL600",         8,   6126,  4604,  255, 32, 3, wacom_pl_irq },
- 	{ "Wacom PL600SX",       8,   6260,  5016,  255, 32, 3, wacom_pl_irq },
- 	{ "Wacom PL550",         8,   6144,  4608,  511, 32, 3, wacom_pl_irq },
- 	{ "Wacom PL800",         8,   7220,  5780,  511, 32, 3, wacom_pl_irq },
-	{ "Wacom Intuos2 4x5",   10, 12700, 10600, 1023, 15, 2, wacom_intuos_irq },
-	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 15, 2, wacom_intuos_irq },
-	{ "Wacom Intuos2 9x12",  10, 30480, 24060, 1023, 15, 2, wacom_intuos_irq },
-	{ "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, 2, wacom_intuos_irq },
-	{ "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, 2, wacom_intuos_irq },
-	{ "Wacom Volito",        8,   5104,  3712,  511, 32, 1, wacom_graphire_irq },
-	{ "Wacom Cintiq Partner",8,  20480, 15360,  511, 32, 3, wacom_ptu_irq },
-	{ "Wacom Intuos3 4x5",   10, 25400, 20320, 1023, 15, 4, wacom_intuos3_irq },
-	{ "Wacom Intuos3 6x8",   10, 40640, 30480, 1023, 15, 4, wacom_intuos3_irq },
-	{ "Wacom Intuos3 9x12",  10, 60960, 45720, 1023, 15, 4, wacom_intuos3_irq },
-	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 15, 2, wacom_intuos_irq },
- 	{ }
+	{ "Wacom Penpartner",    7,   5040,  3780,  255, 32, PENPARTNER, wacom_penpartner_irq },
+        { "Wacom Graphire",      8,  10206,  7422,  511, 32, GRAPHIRE,   wacom_graphire_irq },
+	{ "Wacom Graphire2 4x5", 8,  10206,  7422,  511, 32, GRAPHIRE,   wacom_graphire_irq },
+	{ "Wacom Graphire2 5x7", 8,  13918, 10206,  511, 32, GRAPHIRE,   wacom_graphire_irq },
+	{ "Wacom Graphire3",     8,  10208,  7424,  511, 32, GRAPHIRE,   wacom_graphire_irq },
+	{ "Wacom Graphire3 6x8", 8,  16704, 12064,  511, 32, GRAPHIRE,   wacom_graphire_irq },
+	{ "Wacom Intuos 4x5",   10,  12700, 10600, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ "Wacom Intuos 6x8",   10,  20320, 16240, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ "Wacom Intuos 9x12",  10,  30480, 24060, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ "Wacom Intuos 12x12", 10,  30480, 31680, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ "Wacom Intuos 12x18", 10,  45720, 31680, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ "Wacom PL400",         8,   5408,  4056,  255, 32, PL,         wacom_pl_irq },
+	{ "Wacom PL500",         8,   6144,  4608,  255, 32, PL,         wacom_pl_irq },
+	{ "Wacom PL600",         8,   6126,  4604,  255, 32, PL,         wacom_pl_irq },
+	{ "Wacom PL600SX",       8,   6260,  5016,  255, 32, PL,         wacom_pl_irq },
+	{ "Wacom PL550",         8,   6144,  4608,  511, 32, PL,         wacom_pl_irq },
+	{ "Wacom PL800",         8,   7220,  5780,  511, 32, PL,         wacom_pl_irq },
+	{ "Wacom Intuos2 4x5",   10, 12700, 10600, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ "Wacom Intuos2 9x12",  10, 30480, 24060, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ "Wacom Volito",        8,   5104,  3712,  511, 32, GRAPHIRE,   wacom_graphire_irq },
+	{ "Wacom Cintiq Partner",8,  20480, 15360,  511, 32, PL,         wacom_ptu_irq },
+	{ "Wacom Intuos3 4x5",   10, 25400, 20320, 1023, 15, INTUOS3,    wacom_intuos_irq },
+	{ "Wacom Intuos3 6x8",   10, 40640, 30480, 1023, 15, INTUOS3,    wacom_intuos_irq },
+	{ "Wacom Intuos3 9x12",  10, 60960, 45720, 1023, 15, INTUOS3,    wacom_intuos_irq },
+	{ "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 15, CINTIQ,     wacom_intuos_irq },
+	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 15, INTUOS,     wacom_intuos_irq },
+	{ }
 };
 
 static struct usb_device_id wacom_ids[] = {
@@ -761,6 +709,7 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
 	{ }
 };
@@ -771,14 +720,9 @@ static int wacom_open(struct input_dev *dev)
 {
 	struct wacom *wacom = dev->private;
 
-	if (wacom->open++)
-		return 0;
-
 	wacom->irq->dev = wacom->usbdev;
-	if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
-		wacom->open--;
+	if (usb_submit_urb(wacom->irq, GFP_KERNEL))
 		return -EIO;
-	}
 
 	return 0;
 }
@@ -787,8 +731,7 @@ static void wacom_close(struct input_dev *dev)
 {
 	struct wacom *wacom = dev->private;
 
-	if (!--wacom->open)
-		usb_kill_urb(wacom->irq);
+	usb_kill_urb(wacom->irq);
 }
 
 static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
@@ -823,32 +766,33 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
 
 	switch (wacom->features->type) {
-		case 1:
+		case GRAPHIRE:
 			wacom->dev.evbit[0] |= BIT(EV_REL);
 			wacom->dev.relbit[0] |= BIT(REL_WHEEL);
 			wacom->dev.absbit[0] |= BIT(ABS_DISTANCE);
 			wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
- 			wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
+			wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
 			break;
 
-		case 4: /* new functions for Intuos3 */
+		case INTUOS3:
+		case CINTIQ:
 			wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
 			wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
 			wacom->dev.absbit[0] |= BIT(ABS_RX) | BIT(ABS_RY);
 			/* fall through */
 
-		case 2:
+		case INTUOS:
 			wacom->dev.evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
 			wacom->dev.mscbit[0] |= BIT(MSC_SERIAL);
 			wacom->dev.relbit[0] |= BIT(REL_WHEEL);
 			wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
- 			wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE)	| BIT(BTN_TOOL_BRUSH)
+			wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE)	| BIT(BTN_TOOL_BRUSH)
 							  | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2);
 			wacom->dev.absbit[0] |= BIT(ABS_DISTANCE) | BIT(ABS_WHEEL) | BIT(ABS_TILT_X) | BIT(ABS_TILT_Y) | BIT(ABS_RZ) | BIT(ABS_THROTTLE);
 			break;
 
-		case 3:
- 			wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
+		case PL:
+			wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
 			break;
 	}
 
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index d65edb2..a7fa1b1 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -104,13 +104,12 @@ MODULE_DEVICE_TABLE (usb, xpad_table);
 struct usb_xpad {
 	struct input_dev dev;			/* input device interface */
 	struct usb_device *udev;		/* usb device */
-	
+
 	struct urb *irq_in;			/* urb for interrupt in report */
 	unsigned char *idata;			/* input data */
 	dma_addr_t idata_dma;
-	
+
 	char phys[65];				/* physical device path */
-	int open_count;				/* reference count */
 };
 
 /*
@@ -128,35 +127,35 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 	struct input_dev *dev = &xpad->dev;
 
 	input_regs(dev, regs);
-	
+
 	/* left stick */
 	input_report_abs(dev, ABS_X, (__s16) (((__s16)data[13] << 8) | data[12]));
 	input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[15] << 8) | data[14]));
-	
+
 	/* right stick */
 	input_report_abs(dev, ABS_RX, (__s16) (((__s16)data[17] << 8) | data[16]));
 	input_report_abs(dev, ABS_RY, (__s16) (((__s16)data[19] << 8) | data[18]));
-	
+
 	/* triggers left/right */
 	input_report_abs(dev, ABS_Z, data[10]);
 	input_report_abs(dev, ABS_RZ, data[11]);
-	
+
 	/* digital pad */
 	input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04));
 	input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01));
-	
+
 	/* start/back buttons and stick press left/right */
 	input_report_key(dev, BTN_START, (data[2] & 0x10) >> 4);
 	input_report_key(dev, BTN_BACK, (data[2] & 0x20) >> 5);
 	input_report_key(dev, BTN_THUMBL, (data[2] & 0x40) >> 6);
 	input_report_key(dev, BTN_THUMBR, data[2] >> 7);
-	
+
 	/* "analog" buttons A, B, X, Y */
 	input_report_key(dev, BTN_A, data[4]);
 	input_report_key(dev, BTN_B, data[5]);
 	input_report_key(dev, BTN_X, data[6]);
 	input_report_key(dev, BTN_Y, data[7]);
-	
+
 	/* "analog" buttons black, white */
 	input_report_key(dev, BTN_C, data[8]);
 	input_report_key(dev, BTN_Z, data[9]);
@@ -168,7 +167,7 @@ static void xpad_irq_in(struct urb *urb, struct pt_regs *regs)
 {
 	struct usb_xpad *xpad = urb->context;
 	int retval;
-	
+
 	switch (urb->status) {
 	case 0:
 		/* success */
@@ -183,7 +182,7 @@ static void xpad_irq_in(struct urb *urb, struct pt_regs *regs)
 		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
 		goto exit;
 	}
-	
+
 	xpad_process_packet(xpad, 0, xpad->idata, regs);
 
 exit:
@@ -196,25 +195,19 @@ exit:
 static int xpad_open (struct input_dev *dev)
 {
 	struct usb_xpad *xpad = dev->private;
-	
-	if (xpad->open_count++)
-		return 0;
-	
+
 	xpad->irq_in->dev = xpad->udev;
-	if (usb_submit_urb(xpad->irq_in, GFP_KERNEL)) {
-		xpad->open_count--;
+	if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
 		return -EIO;
-	}
-	
+
 	return 0;
 }
 
 static void xpad_close (struct input_dev *dev)
 {
 	struct usb_xpad *xpad = dev->private;
-	
-	if (!--xpad->open_count)
-		usb_kill_urb(xpad->irq_in);
+
+	usb_kill_urb(xpad->irq_in);
 }
 
 static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
@@ -224,19 +217,19 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_endpoint_descriptor *ep_irq_in;
 	char path[64];
 	int i;
-	
+
 	for (i = 0; xpad_device[i].idVendor; i++) {
 		if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
 		    (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct))
 			break;
 	}
-	
+
 	if ((xpad = kmalloc (sizeof(struct usb_xpad), GFP_KERNEL)) == NULL) {
 		err("cannot allocate memory for new pad");
 		return -ENOMEM;
 	}
 	memset(xpad, 0, sizeof(struct usb_xpad));
-	
+
 	xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
 				       SLAB_ATOMIC, &xpad->idata_dma);
 	if (!xpad->idata) {
@@ -251,18 +244,18 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
                 kfree(xpad);
 		return -ENOMEM;
         }
-	
+
 	ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
-	
+
 	usb_fill_int_urb(xpad->irq_in, udev,
 			 usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
 			 xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
 			 xpad, ep_irq_in->bInterval);
 	xpad->irq_in->transfer_dma = xpad->idata_dma;
 	xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-	
+
 	xpad->udev = udev;
-	
+
 	xpad->dev.id.bustype = BUS_USB;
 	xpad->dev.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
 	xpad->dev.id.product = le16_to_cpu(udev->descriptor.idProduct);
@@ -273,21 +266,21 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	xpad->dev.phys = xpad->phys;
 	xpad->dev.open = xpad_open;
 	xpad->dev.close = xpad_close;
-	
+
 	usb_make_path(udev, path, 64);
 	snprintf(xpad->phys, 64,  "%s/input0", path);
-	
+
 	xpad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-	
+
 	for (i = 0; xpad_btn[i] >= 0; i++)
 		set_bit(xpad_btn[i], xpad->dev.keybit);
-	
+
 	for (i = 0; xpad_abs[i] >= 0; i++) {
-		
+
 		signed short t = xpad_abs[i];
-		
+
 		set_bit(t, xpad->dev.absbit);
-		
+
 		switch (t) {
 			case ABS_X:
 			case ABS_Y:
@@ -310,11 +303,11 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 				break;
 		}
 	}
-	
+
 	input_register_device(&xpad->dev);
-	
+
 	printk(KERN_INFO "input: %s on %s", xpad->dev.name, path);
-	
+
 	usb_set_intfdata(intf, xpad);
 	return 0;
 }
@@ -322,7 +315,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 static void xpad_disconnect(struct usb_interface *intf)
 {
 	struct usb_xpad *xpad = usb_get_intfdata (intf);
-	
+
 	usb_set_intfdata(intf, NULL);
 	if (xpad) {
 		usb_kill_urb(xpad->irq_in);