Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb

* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb:
  uwb: Orphan the UWB and WUSB subsystems
  uwb: Remove the WLP subsystem and drivers

1 files changed, 0 insertions, 474 deletions

diff --git a/drivers/uwb/i1480/i1480u-wlp/rx.c b/drivers/uwb/i1480/i1480u-wlp/rx.c
deleted file mode 100644
index d4e51e1..0000000
--- a/drivers/uwb/i1480/i1480u-wlp/rx.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * WUSB Wire Adapter: WLP interface
- * Driver for the Linux Network stack.
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * i1480u's RX handling is simple. i1480u will send the received
- * network packets broken up in fragments; 1 to N fragments make a
- * packet, we assemble them together and deliver the packet with netif_rx().
- *
- * Beacuse each USB transfer is a *single* fragment (except when the
- * transfer contains a first fragment), each URB called thus
- * back contains one or two fragments. So we queue N URBs, each with its own
- * fragment buffer. When a URB is done, we process it (adding to the
- * current skb from the fragment buffer until complete). Once
- * processed, we requeue the URB. There is always a bunch of URBs
- * ready to take data, so the intergap should be minimal.
- *
- * An URB's transfer buffer is the data field of a socket buffer. This
- * reduces copying as data can be passed directly to network layer. If a
- * complete packet or 1st fragment is received the URB's transfer buffer is
- * taken away from it and used to send data to the network layer. In this
- * case a new transfer buffer is allocated to the URB before being requeued.
- * If a "NEXT" or "LAST" fragment is received, the fragment contents is
- * appended to the RX packet under construction and the transfer buffer
- * is reused. To be able to use this buffer to assemble complete packets
- * we set each buffer's size to that of the MAX ethernet packet that can
- * be received. There is thus room for improvement in memory usage.
- *
- * When the max tx fragment size increases, we should be able to read
- * data into the skbs directly with very simple code.
- *
- * ROADMAP:
- *
- *   ENTRY POINTS:
- *
- *     i1480u_rx_setup(): setup RX context [from i1480u_open()]
- *
- *     i1480u_rx_release(): release RX context [from i1480u_stop()]
- *
- *     i1480u_rx_cb(): called when the RX USB URB receives a
- *                     packet. It removes the header and pushes it up
- *                     the Linux netdev stack with netif_rx().
- *
- *       i1480u_rx_buffer()
- *         i1480u_drop() and i1480u_fix()
- *         i1480u_skb_deliver
- *
- */
-
-#include <linux/gfp.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include "i1480u-wlp.h"
-
-/*
- * Setup the RX context
- *
- * Each URB is provided with a transfer_buffer that is the data field
- * of a new socket buffer.
- */
-int i1480u_rx_setup(struct i1480u *i1480u)
-{
-	int result, cnt;
-	struct device *dev = &i1480u->usb_iface->dev;
-	struct net_device *net_dev = i1480u->net_dev;
-	struct usb_endpoint_descriptor *epd;
-	struct sk_buff *skb;
-
-	/* Alloc RX stuff */
-	i1480u->rx_skb = NULL;	/* not in process of receiving packet */
-	result = -ENOMEM;
-	epd = &i1480u->usb_iface->cur_altsetting->endpoint[1].desc;
-	for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
-		struct i1480u_rx_buf *rx_buf = &i1480u->rx_buf[cnt];
-		rx_buf->i1480u = i1480u;
-		skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE);
-		if (!skb) {
-			dev_err(dev,
-				"RX: cannot allocate RX buffer %d\n", cnt);
-			result = -ENOMEM;
-			goto error;
-		}
-		skb->dev = net_dev;
-		skb->ip_summed = CHECKSUM_NONE;
-		skb_reserve(skb, 2);
-		rx_buf->data = skb;
-		rx_buf->urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (unlikely(rx_buf->urb == NULL)) {
-			dev_err(dev, "RX: cannot allocate URB %d\n", cnt);
-			result = -ENOMEM;
-			goto error;
-		}
-		usb_fill_bulk_urb(rx_buf->urb, i1480u->usb_dev,
-			  usb_rcvbulkpipe(i1480u->usb_dev, epd->bEndpointAddress),
-			  rx_buf->data->data, i1480u_MAX_RX_PKT_SIZE - 2,
-			  i1480u_rx_cb, rx_buf);
-		result = usb_submit_urb(rx_buf->urb, GFP_NOIO);
-		if (unlikely(result < 0)) {
-			dev_err(dev, "RX: cannot submit URB %d: %d\n",
-				cnt, result);
-			goto error;
-		}
-	}
-	return 0;
-
-error:
-	i1480u_rx_release(i1480u);
-	return result;
-}
-
-
-/* Release resources associated to the rx context */
-void i1480u_rx_release(struct i1480u *i1480u)
-{
-	int cnt;
-	for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
-		if (i1480u->rx_buf[cnt].data)
-			dev_kfree_skb(i1480u->rx_buf[cnt].data);
-		if (i1480u->rx_buf[cnt].urb) {
-			usb_kill_urb(i1480u->rx_buf[cnt].urb);
-			usb_free_urb(i1480u->rx_buf[cnt].urb);
-		}
-	}
-	if (i1480u->rx_skb != NULL)
-		dev_kfree_skb(i1480u->rx_skb);
-}
-
-static
-void i1480u_rx_unlink_urbs(struct i1480u *i1480u)
-{
-	int cnt;
-	for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
-		if (i1480u->rx_buf[cnt].urb)
-			usb_unlink_urb(i1480u->rx_buf[cnt].urb);
-	}
-}
-
-/* Fix an out-of-sequence packet */
-#define i1480u_fix(i1480u, msg...)			\
-do {							\
-	if (printk_ratelimit())				\
-		dev_err(&i1480u->usb_iface->dev, msg);	\
-	dev_kfree_skb_irq(i1480u->rx_skb);		\
-	i1480u->rx_skb = NULL;				\
-	i1480u->rx_untd_pkt_size = 0;			\
-} while (0)
-
-
-/* Drop an out-of-sequence packet */
-#define i1480u_drop(i1480u, msg...)			\
-do {							\
-	if (printk_ratelimit())				\
-		dev_err(&i1480u->usb_iface->dev, msg);	\
-	i1480u->net_dev->stats.rx_dropped++;			\
-} while (0)
-
-
-
-
-/* Finalizes setting up the SKB and delivers it
- *
- * We first pass the incoming frame to WLP substack for verification. It
- * may also be a WLP association frame in which case WLP will take over the
- * processing. If WLP does not take it over it will still verify it, if the
- * frame is invalid the skb will be freed by WLP and we will not continue
- * parsing.
- * */
-static
-void i1480u_skb_deliver(struct i1480u *i1480u)
-{
-	int should_parse;
-	struct net_device *net_dev = i1480u->net_dev;
-	struct device *dev = &i1480u->usb_iface->dev;
-
-	should_parse = wlp_receive_frame(dev, &i1480u->wlp, i1480u->rx_skb,
-					 &i1480u->rx_srcaddr);
-	if (!should_parse)
-		goto out;
-	i1480u->rx_skb->protocol = eth_type_trans(i1480u->rx_skb, net_dev);
-	net_dev->stats.rx_packets++;
-	net_dev->stats.rx_bytes += i1480u->rx_untd_pkt_size;
-
-	netif_rx(i1480u->rx_skb);		/* deliver */
-out:
-	i1480u->rx_skb = NULL;
-	i1480u->rx_untd_pkt_size = 0;
-}
-
-
-/*
- * Process a buffer of data received from the USB RX endpoint
- *
- * First fragment arrives with next or last fragment. All other fragments
- * arrive alone.
- *
- * /me hates long functions.
- */
-static
-void i1480u_rx_buffer(struct i1480u_rx_buf *rx_buf)
-{
-	unsigned pkt_completed = 0;	/* !0 when we got all pkt fragments */
-	size_t untd_hdr_size, untd_frg_size;
-	size_t i1480u_hdr_size;
-	struct wlp_rx_hdr *i1480u_hdr = NULL;
-
-	struct i1480u *i1480u = rx_buf->i1480u;
-	struct sk_buff *skb = rx_buf->data;
-	int size_left = rx_buf->urb->actual_length;
-	void *ptr = rx_buf->urb->transfer_buffer; /* also rx_buf->data->data */
-	struct untd_hdr *untd_hdr;
-
-	struct net_device *net_dev = i1480u->net_dev;
-	struct device *dev = &i1480u->usb_iface->dev;
-	struct sk_buff *new_skb;
-
-#if 0
-	dev_fnstart(dev,
-		    "(i1480u %p ptr %p size_left %zu)\n", i1480u, ptr, size_left);
-	dev_err(dev, "RX packet, %zu bytes\n", size_left);
-	dump_bytes(dev, ptr, size_left);
-#endif
-	i1480u_hdr_size = sizeof(struct wlp_rx_hdr);
-
-	while (size_left > 0) {
-		if (pkt_completed) {
-			i1480u_drop(i1480u, "RX: fragment follows completed"
-					 "packet in same buffer. Dropping\n");
-			break;
-		}
-		untd_hdr = ptr;
-		if (size_left < sizeof(*untd_hdr)) {	/*  Check the UNTD header */
-			i1480u_drop(i1480u, "RX: short UNTD header! Dropping\n");
-			goto out;
-		}
-		if (unlikely(untd_hdr_rx_tx(untd_hdr) == 0)) {	/* Paranoia: TX set? */
-			i1480u_drop(i1480u, "RX: TX bit set! Dropping\n");
-			goto out;
-		}
-		switch (untd_hdr_type(untd_hdr)) {	/* Check the UNTD header type */
-		case i1480u_PKT_FRAG_1ST: {
-			struct untd_hdr_1st *untd_hdr_1st = (void *) untd_hdr;
-			dev_dbg(dev, "1st fragment\n");
-			untd_hdr_size = sizeof(struct untd_hdr_1st);
-			if (i1480u->rx_skb != NULL)
-				i1480u_fix(i1480u, "RX: 1st fragment out of "
-					"sequence! Fixing\n");
-			if (size_left < untd_hdr_size + i1480u_hdr_size) {
-				i1480u_drop(i1480u, "RX: short 1st fragment! "
-					"Dropping\n");
-				goto out;
-			}
-			i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len)
-						 - i1480u_hdr_size;
-			untd_frg_size = le16_to_cpu(untd_hdr_1st->fragment_len);
-			if (size_left < untd_hdr_size + untd_frg_size) {
-				i1480u_drop(i1480u,
-					    "RX: short payload! Dropping\n");
-				goto out;
-			}
-			i1480u->rx_skb = skb;
-			i1480u_hdr = (void *) untd_hdr_1st + untd_hdr_size;
-			i1480u->rx_srcaddr = i1480u_hdr->srcaddr;
-			skb_put(i1480u->rx_skb, untd_hdr_size + untd_frg_size);
-			skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size);
-			stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7);
-			stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18);
-			rx_buf->data = NULL; /* need to create new buffer */
-			break;
-		}
-		case i1480u_PKT_FRAG_NXT: {
-			dev_dbg(dev, "nxt fragment\n");
-			untd_hdr_size = sizeof(struct untd_hdr_rst);
-			if (i1480u->rx_skb == NULL) {
-				i1480u_drop(i1480u, "RX: next fragment out of "
-					    "sequence! Dropping\n");
-				goto out;
-			}
-			if (size_left < untd_hdr_size) {
-				i1480u_drop(i1480u, "RX: short NXT fragment! "
-					    "Dropping\n");
-				goto out;
-			}
-			untd_frg_size = le16_to_cpu(untd_hdr->len);
-			if (size_left < untd_hdr_size + untd_frg_size) {
-				i1480u_drop(i1480u,
-					    "RX: short payload! Dropping\n");
-				goto out;
-			}
-			memmove(skb_put(i1480u->rx_skb, untd_frg_size),
-					ptr + untd_hdr_size, untd_frg_size);
-			break;
-		}
-		case i1480u_PKT_FRAG_LST: {
-			dev_dbg(dev, "Lst fragment\n");
-			untd_hdr_size = sizeof(struct untd_hdr_rst);
-			if (i1480u->rx_skb == NULL) {
-				i1480u_drop(i1480u, "RX: last fragment out of "
-					    "sequence! Dropping\n");
-				goto out;
-			}
-			if (size_left < untd_hdr_size) {
-				i1480u_drop(i1480u, "RX: short LST fragment! "
-					    "Dropping\n");
-				goto out;
-			}
-			untd_frg_size = le16_to_cpu(untd_hdr->len);
-			if (size_left < untd_frg_size + untd_hdr_size) {
-				i1480u_drop(i1480u,
-					    "RX: short payload! Dropping\n");
-				goto out;
-			}
-			memmove(skb_put(i1480u->rx_skb, untd_frg_size),
-					ptr + untd_hdr_size, untd_frg_size);
-			pkt_completed = 1;
-			break;
-		}
-		case i1480u_PKT_FRAG_CMP: {
-			dev_dbg(dev, "cmp fragment\n");
-			untd_hdr_size = sizeof(struct untd_hdr_cmp);
-			if (i1480u->rx_skb != NULL)
-				i1480u_fix(i1480u, "RX: fix out-of-sequence CMP"
-					   " fragment!\n");
-			if (size_left < untd_hdr_size + i1480u_hdr_size) {
-				i1480u_drop(i1480u, "RX: short CMP fragment! "
-					    "Dropping\n");
-				goto out;
-			}
-			i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len);
-			untd_frg_size = i1480u->rx_untd_pkt_size;
-			if (size_left < i1480u->rx_untd_pkt_size + untd_hdr_size) {
-				i1480u_drop(i1480u,
-					    "RX: short payload! Dropping\n");
-				goto out;
-			}
-			i1480u->rx_skb = skb;
-			i1480u_hdr = (void *) untd_hdr + untd_hdr_size;
-			i1480u->rx_srcaddr = i1480u_hdr->srcaddr;
-			stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7);
-			stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18);
-			skb_put(i1480u->rx_skb, untd_hdr_size + i1480u->rx_untd_pkt_size);
-			skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size);
-			rx_buf->data = NULL;	/* for hand off skb to network stack */
-			pkt_completed = 1;
-			i1480u->rx_untd_pkt_size -= i1480u_hdr_size; /* accurate stat */
-			break;
-		}
-		default:
-			i1480u_drop(i1480u, "RX: unknown packet type %u! "
-				    "Dropping\n", untd_hdr_type(untd_hdr));
-			goto out;
-		}
-		size_left -= untd_hdr_size + untd_frg_size;
-		if (size_left > 0)
-			ptr += untd_hdr_size + untd_frg_size;
-	}
-	if (pkt_completed)
-		i1480u_skb_deliver(i1480u);
-out:
-	/* recreate needed RX buffers*/
-	if (rx_buf->data == NULL) {
-		/* buffer is being used to receive packet, create new */
-		new_skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE);
-		if (!new_skb) {
-			if (printk_ratelimit())
-				dev_err(dev,
-				"RX: cannot allocate RX buffer\n");
-		} else {
-			new_skb->dev = net_dev;
-			new_skb->ip_summed = CHECKSUM_NONE;
-			skb_reserve(new_skb, 2);
-			rx_buf->data = new_skb;
-		}
-	}
-	return;
-}
-
-
-/*
- * Called when an RX URB has finished receiving or has found some kind
- * of error condition.
- *
- * LIMITATIONS:
- *
- *  - We read USB-transfers, each transfer contains a SINGLE fragment
- *    (can contain a complete packet, or a 1st, next, or last fragment
- *    of a packet).
- *    Looks like a transfer can contain more than one fragment (07/18/06)
- *
- *  - Each transfer buffer is the size of the maximum packet size (minus
- *    headroom), i1480u_MAX_PKT_SIZE - 2
- *
- *  - We always read the full USB-transfer, no partials.
- *
- *  - Each transfer is read directly into a skb. This skb will be used to
- *    send data to the upper layers if it is the first fragment or a complete
- *    packet. In the other cases the data will be copied from the skb to
- *    another skb that is being prepared for the upper layers from a prev
- *    first fragment.
- *
- * It is simply too much of a pain. Gosh, there should be a unified
- * SG infrastructure for *everything* [so that I could declare a SG
- * buffer, pass it to USB for receiving, append some space to it if
- * I wish, receive more until I have the whole chunk, adapt
- * pointers on each fragment to remove hardware headers and then
- * attach that to an skbuff and netif_rx()].
- */
-void i1480u_rx_cb(struct urb *urb)
-{
-	int result;
-	int do_parse_buffer = 1;
-	struct i1480u_rx_buf *rx_buf = urb->context;
-	struct i1480u *i1480u = rx_buf->i1480u;
-	struct device *dev = &i1480u->usb_iface->dev;
-	unsigned long flags;
-	u8 rx_buf_idx = rx_buf - i1480u->rx_buf;
-
-	switch (urb->status) {
-	case 0:
-		break;
-	case -ECONNRESET:	/* Not an error, but a controlled situation; */
-	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
-	case -ESHUTDOWN:	/* going away! */
-		dev_err(dev, "RX URB[%u]: goind down %d\n",
-			rx_buf_idx, urb->status);
-		goto error;
-	default:
-		dev_err(dev, "RX URB[%u]: unknown status %d\n",
-			rx_buf_idx, urb->status);
-		if (edc_inc(&i1480u->rx_errors, EDC_MAX_ERRORS,
-					EDC_ERROR_TIMEFRAME)) {
-			dev_err(dev, "RX: max acceptable errors exceeded,"
-					" resetting device.\n");
-			i1480u_rx_unlink_urbs(i1480u);
-			wlp_reset_all(&i1480u->wlp);
-			goto error;
-		}
-		do_parse_buffer = 0;
-		break;
-	}
-	spin_lock_irqsave(&i1480u->lock, flags);
-	/* chew the data fragments, extract network packets */
-	if (do_parse_buffer) {
-		i1480u_rx_buffer(rx_buf);
-		if (rx_buf->data) {
-			rx_buf->urb->transfer_buffer = rx_buf->data->data;
-			result = usb_submit_urb(rx_buf->urb, GFP_ATOMIC);
-			if (result < 0) {
-				dev_err(dev, "RX URB[%u]: cannot submit %d\n",
-					rx_buf_idx, result);
-			}
-		}
-	}
-	spin_unlock_irqrestore(&i1480u->lock, flags);
-error:
-	return;
-}
-