Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:
 - Removal of the Documentation/watchdog/00-INDEX file
 - Fix boot status reporting for imx2_wdt
 - clean-up sp805_wdt, pnx4008_wdt and mpcore_wdt
 - convert printk in watchdog drivers to pr_ functions
 - change nowayout module parameter to bool for every watchdog device
 - conversion of jz4740_wdt, pnx4008_wdt, max63xx_wdt, softdog,
   ep93xx_wdt, coh901327 and txx9wdt to new watchdog API
 - Add support for the WDIOC_GETTIMELEFT ioctl call to the new watchdog
   API
 - Change the new watchdog API so that the driver updates the timeout
   value
 - two fixes for the xen_wdt driver

Fix up conflicts in ep93xx driver due to the same patches being merged
through separate branches.

* git://www.linux-watchdog.org/linux-watchdog: (33 commits)
  watchdog: txx9wdt: fix timeout
  watchdog: Convert txx9wdt driver to watchdog framework
  watchdog: coh901327_wdt.c: fix timeout
  watchdog: coh901327: convert to use watchdog core
  watchdog: Add support for WDIOC_GETTIMELEFT IOCTL in watchdog core
  watchdog: ep93xx_wdt: timeout is an unsigned int value.
  watchdog: ep93xx_wdt: Fix timeout after conversion to watchdog core
  watchdog: Convert ep93xx driver to watchdog core
  watchdog: sp805: Use devm routines
  watchdog: sp805: replace readl/writel with lighter _relaxed variants
  watchdog: sp805: Fix documentation style comment
  watchdog: mpcore_wdt: Allow platform_get_irq() to fail
  watchdog: mpcore_wdt: Use devm routines
  watchdog: mpcore_wdt: Rename dev to pdev for pointing to struct platform_device
  watchdog: xen: don't clear is_active when xen_wdt_stop() failed
  watchdog: xen: don't unconditionally enable the watchdog during resume
  watchdog: fix compiler error for missing parenthesis
  watchdog: ep93xx_wdt.c: fix platform probe
  watchdog: ep93xx: Convert the watchdog driver into a platform device.
  watchdog: fix set_timeout operations
  ...

1 files changed, 32 insertions, 38 deletions

diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index e0fc3baa..a3cea59 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -37,6 +37,8 @@
  *		Matt Domsch	:	nowayout module option
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -58,8 +60,6 @@
 #define WDT_IS_PCI
 #include "wd501p.h"
 
-#define PFX "wdt_pci: "
-
 /* We can only use 1 card due to the /dev/watchdog restriction */
 static int dev_count;
 
@@ -80,8 +80,8 @@ MODULE_PARM_DESC(heartbeat,
 		"Watchdog heartbeat in seconds. (0<heartbeat<65536, default="
 				__MODULE_STRING(WD_TIMO) ")");
 
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
 MODULE_PARM_DESC(nowayout,
 		"Watchdog cannot be stopped once started (default="
 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
@@ -312,33 +312,32 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
 	status = inb(WDT_SR);
 	udelay(8);
 
-	printk(KERN_CRIT PFX "status %d\n", status);
+	pr_crit("status %d\n", status);
 
 	if (type == 501) {
 		if (!(status & WDC_SR_TGOOD)) {
-			printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",
-								inb(WDT_RT));
+			pr_crit("Overheat alarm (%d)\n", inb(WDT_RT));
 			udelay(8);
 		}
 		if (!(status & WDC_SR_PSUOVER))
-			printk(KERN_CRIT PFX "PSU over voltage.\n");
+			pr_crit("PSU over voltage\n");
 		if (!(status & WDC_SR_PSUUNDR))
-			printk(KERN_CRIT PFX "PSU under voltage.\n");
+			pr_crit("PSU under voltage\n");
 		if (tachometer) {
 			if (!(status & WDC_SR_FANGOOD))
-				printk(KERN_CRIT PFX "Possible fan fault.\n");
+				pr_crit("Possible fan fault\n");
 		}
 	}
 	if (!(status & WDC_SR_WCCR)) {
 #ifdef SOFTWARE_REBOOT
 #ifdef ONLY_TESTING
-		printk(KERN_CRIT PFX "Would Reboot.\n");
+		pr_crit("Would Reboot\n");
 #else
-		printk(KERN_CRIT PFX "Initiating system reboot.\n");
+		pr_crit("Initiating system reboot\n");
 		emergency_restart(NULL);
 #endif
 #else
-		printk(KERN_CRIT PFX "Reset in 5ms.\n");
+		pr_crit("Reset in 5ms\n");
 #endif
 	}
 	spin_unlock(&wdtpci_lock);
@@ -484,7 +483,7 @@ static int wdtpci_release(struct inode *inode, struct file *file)
 	if (expect_close == 42) {
 		wdtpci_stop();
 	} else {
-		printk(KERN_CRIT PFX "Unexpected close, not stopping timer!");
+		pr_crit("Unexpected close, not stopping timer!\n");
 		wdtpci_ping();
 	}
 	expect_close = 0;
@@ -614,29 +613,29 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev,
 
 	dev_count++;
 	if (dev_count > 1) {
-		printk(KERN_ERR PFX "This driver only supports one device\n");
+		pr_err("This driver only supports one device\n");
 		return -ENODEV;
 	}
 
 	if (type != 500 && type != 501) {
-		printk(KERN_ERR PFX "unknown card type '%d'.\n", type);
+		pr_err("unknown card type '%d'\n", type);
 		return -ENODEV;
 	}
 
 	if (pci_enable_device(dev)) {
-		printk(KERN_ERR PFX "Not possible to enable PCI Device\n");
+		pr_err("Not possible to enable PCI Device\n");
 		return -ENODEV;
 	}
 
 	if (pci_resource_start(dev, 2) == 0x0000) {
-		printk(KERN_ERR PFX "No I/O-Address for card detected\n");
+		pr_err("No I/O-Address for card detected\n");
 		ret = -ENODEV;
 		goto out_pci;
 	}
 
 	if (pci_request_region(dev, 2, "wdt_pci")) {
-		printk(KERN_ERR PFX "I/O address 0x%llx already in use\n",
-			(unsigned long long)pci_resource_start(dev, 2));
+		pr_err("I/O address 0x%llx already in use\n",
+		       (unsigned long long)pci_resource_start(dev, 2));
 		goto out_pci;
 	}
 
@@ -645,53 +644,48 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev,
 
 	if (request_irq(irq, wdtpci_interrupt, IRQF_SHARED,
 			 "wdt_pci", &wdtpci_miscdev)) {
-		printk(KERN_ERR PFX "IRQ %d is not free\n", irq);
+		pr_err("IRQ %d is not free\n", irq);
 		goto out_reg;
 	}
 
-	printk(KERN_INFO
-	 "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%llx (Interrupt %d)\n",
-					(unsigned long long)io, irq);
+	pr_info("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%llx (Interrupt %d)\n",
+		(unsigned long long)io, irq);
 
 	/* Check that the heartbeat value is within its range;
 	   if not reset to the default */
 	if (wdtpci_set_heartbeat(heartbeat)) {
 		wdtpci_set_heartbeat(WD_TIMO);
-		printk(KERN_INFO PFX
-		  "heartbeat value must be 0 < heartbeat < 65536, using %d\n",
-								WD_TIMO);
+		pr_info("heartbeat value must be 0 < heartbeat < 65536, using %d\n",
+			WD_TIMO);
 	}
 
 	ret = register_reboot_notifier(&wdtpci_notifier);
 	if (ret) {
-		printk(KERN_ERR PFX
-			"cannot register reboot notifier (err=%d)\n", ret);
+		pr_err("cannot register reboot notifier (err=%d)\n", ret);
 		goto out_irq;
 	}
 
 	if (type == 501) {
 		ret = misc_register(&temp_miscdev);
 		if (ret) {
-			printk(KERN_ERR PFX
-			"cannot register miscdev on minor=%d (err=%d)\n",
-							TEMP_MINOR, ret);
+			pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+			       TEMP_MINOR, ret);
 			goto out_rbt;
 		}
 	}
 
 	ret = misc_register(&wdtpci_miscdev);
 	if (ret) {
-		printk(KERN_ERR PFX
-			"cannot register miscdev on minor=%d (err=%d)\n",
-						WATCHDOG_MINOR, ret);
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
 		goto out_misc;
 	}
 
-	printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
+	pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
 		heartbeat, nowayout);
 	if (type == 501)
-		printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
-				(tachometer ? "Enabled" : "Disabled"));
+		pr_info("Fan Tachometer is %s\n",
+			tachometer ? "Enabled" : "Disabled");
 
 	ret = 0;
 out: