diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-11-17 02:46:21 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-11-17 02:46:21 (GMT) |
commit | 0c864d8b3e51bd61f43484268c9aa4eb9a199b02 (patch) | |
tree | de9fa5c3792c84fa173e6d27c856bde0254f7eeb /drivers | |
parent | 4fd24483d1de7a3c183fa862fa9ff13b49361966 (diff) | |
parent | f4a75d2eb7b1e2206094b901be09adb31ba63681 (diff) | |
download | linux-0c864d8b3e51bd61f43484268c9aa4eb9a199b02.tar.xz |
Merge 3.7-rc6 into usb-next.
This resolves a conflict with these files:
drivers/usb/early/ehci-dbgp.c
drivers/usb/host/ehci-ls1x.c
drivers/usb/host/ohci-xls.c
drivers/usb/musb/ux500.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
42 files changed, 359 insertions, 150 deletions
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index fc2de55..b00000e 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -67,6 +67,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3304) }, { USB_DEVICE(0x0930, 0x0215) }, { USB_DEVICE(0x0489, 0xE03D) }, + { USB_DEVICE(0x0489, 0xE027) }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03F0, 0x311D) }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index debda27..ee82f2f 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -124,6 +124,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c index ff63560..0c48b0e 100644 --- a/drivers/bus/omap-ocp2scp.c +++ b/drivers/bus/omap-ocp2scp.c @@ -22,6 +22,26 @@ #include <linux/pm_runtime.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/platform_data/omap_ocp2scp.h> + +/** + * _count_resources - count for the number of resources + * @res: struct resource * + * + * Count and return the number of resources populated for the device that is + * connected to ocp2scp. + */ +static unsigned _count_resources(struct resource *res) +{ + int cnt = 0; + + while (res->start != res->end) { + cnt++; + res++; + } + + return cnt; +} static int ocp2scp_remove_devices(struct device *dev, void *c) { @@ -34,20 +54,62 @@ static int ocp2scp_remove_devices(struct device *dev, void *c) static int __devinit omap_ocp2scp_probe(struct platform_device *pdev) { - int ret; - struct device_node *np = pdev->dev.of_node; + int ret; + unsigned res_cnt, i; + struct device_node *np = pdev->dev.of_node; + struct platform_device *pdev_child; + struct omap_ocp2scp_platform_data *pdata = pdev->dev.platform_data; + struct omap_ocp2scp_dev *dev; if (np) { ret = of_platform_populate(np, NULL, NULL, &pdev->dev); if (ret) { - dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n"); + dev_err(&pdev->dev, + "failed to add resources for ocp2scp child\n"); goto err0; } + } else if (pdata) { + for (i = 0, dev = *pdata->devices; i < pdata->dev_cnt; i++, + dev++) { + res_cnt = _count_resources(dev->res); + + pdev_child = platform_device_alloc(dev->drv_name, + PLATFORM_DEVID_AUTO); + if (!pdev_child) { + dev_err(&pdev->dev, + "failed to allocate mem for ocp2scp child\n"); + goto err0; + } + + ret = platform_device_add_resources(pdev_child, + dev->res, res_cnt); + if (ret) { + dev_err(&pdev->dev, + "failed to add resources for ocp2scp child\n"); + goto err1; + } + + pdev_child->dev.parent = &pdev->dev; + + ret = platform_device_add(pdev_child); + if (ret) { + dev_err(&pdev->dev, + "failed to register ocp2scp child device\n"); + goto err1; + } + } + } else { + dev_err(&pdev->dev, "OCP2SCP initialized without plat data\n"); + return -EINVAL; } + pm_runtime_enable(&pdev->dev); return 0; +err1: + platform_device_put(pdev_child); + err0: device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices); diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index ca4a25e..e2c17d1 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -40,7 +40,7 @@ void u8500_clk_init(void) CLK_IS_ROOT|CLK_IGNORE_UNUSED, 32768); clk_register_clkdev(clk, "clk32k", NULL); - clk_register_clkdev(clk, NULL, "rtc-pl031"); + clk_register_clkdev(clk, "apb_pclk", "rtc-pl031"); /* PRCMU clocks */ fw_version = prcmu_get_fw_version(); @@ -228,10 +228,17 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1"); + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "msp0"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0"); + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "msp1"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1"); clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE, BIT(5), 0); @@ -239,6 +246,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE, BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2"); clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE, BIT(7), 0); @@ -246,6 +254,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE, BIT(8), 0); + clk_register_clkdev(clk, "apb_pclk", "slimbus0"); clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE, BIT(9), 0); @@ -255,11 +264,16 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE, BIT(10), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4"); + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, BIT(11), 0); + clk_register_clkdev(clk, "apb_pclk", "msp3"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3"); clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3"); clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE, BIT(1), 0); @@ -279,12 +293,13 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE, BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "msp2"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2"); clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE, BIT(6), 0); clk_register_clkdev(clk, "apb_pclk", "sdi1"); - clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE, BIT(7), 0); clk_register_clkdev(clk, "apb_pclk", "sdi3"); @@ -316,10 +331,15 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE, BIT(1), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp0"); + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp1"); + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0"); clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE, BIT(4), 0); @@ -401,10 +421,17 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp0"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0"); + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp1"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1"); clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk", U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE); @@ -412,17 +439,25 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.2"); + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", - U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); - /* FIXME: Redefinition of BIT(3). */ + U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "slimbus0"); + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.4"); + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp3"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3"); /* Periph2 */ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.3"); clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE); @@ -430,6 +465,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp2"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2"); clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE); @@ -450,10 +487,15 @@ void u8500_clk_init(void) /* Periph3 */ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp0"); + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp1"); + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk", U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE); diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index b726b47..6345878 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -143,7 +143,7 @@ static void intel_crt_dpms(struct drm_connector *connector, int mode) int old_dpms; /* PCH platforms and VLV only support on/off. */ - if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON) + if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON) mode = DRM_MODE_DPMS_OFF; if (mode == connector->dpms) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 461a637..4154bcd 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3841,6 +3841,17 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, } } + if (intel_encoder->type == INTEL_OUTPUT_EDP) { + /* Use VBT settings if we have an eDP panel */ + unsigned int edp_bpc = dev_priv->edp.bpp / 3; + + if (edp_bpc < display_bpc) { + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + display_bpc = edp_bpc; + } + continue; + } + /* * HDMI is either 12 or 8, so if the display lets 10bpc sneak * through, clamp it down. (Note: >12bpc will be caught below.) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 79d308d..c600fb0 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2382,6 +2382,18 @@ intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags) return true; } +static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo) +{ + struct drm_device *dev = intel_sdvo->base.base.dev; + struct drm_connector *connector, *tmp; + + list_for_each_entry_safe(connector, tmp, + &dev->mode_config.connector_list, head) { + if (intel_attached_encoder(connector) == &intel_sdvo->base) + intel_sdvo_destroy(connector); + } +} + static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, struct intel_sdvo_connector *intel_sdvo_connector, int type) @@ -2705,7 +2717,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) intel_sdvo->caps.output_flags) != true) { DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", SDVO_NAME(intel_sdvo)); - goto err; + /* Output_setup can leave behind connectors! */ + goto err_output; } /* Only enable the hotplug irq if we need it, to work around noisy @@ -2718,12 +2731,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) /* Set the input timing to the screen. Assume always input 0. */ if (!intel_sdvo_set_target_input(intel_sdvo)) - goto err; + goto err_output; if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo, &intel_sdvo->pixel_clock_min, &intel_sdvo->pixel_clock_max)) - goto err; + goto err_output; DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, " "clock range %dMHz - %dMHz, " @@ -2743,6 +2756,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); return true; +err_output: + intel_sdvo_output_cleanup(intel_sdvo); + err: drm_encoder_cleanup(&intel_encoder->base); i2c_del_adapter(&intel_sdvo->ddc); diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index ba498f8..010bae1 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1625,7 +1625,7 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); /* some early dce3.2 boards have a bug in their transmitter control table */ - if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730)) + if ((rdev->family != CHIP_RV710) && (rdev->family != CHIP_RV730)) atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); } if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) { diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c index 860dc48..bd2a3b4 100644 --- a/drivers/gpu/drm/ttm/ttm_page_alloc.c +++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c @@ -749,7 +749,10 @@ static int ttm_get_pages(struct page **pages, unsigned npages, int flags, /* clear the pages coming from the pool if requested */ if (flags & TTM_PAGE_FLAG_ZERO_ALLOC) { list_for_each_entry(p, &plist, lru) { - clear_page(page_address(p)); + if (PageHighMem(p)) + clear_highpage(p); + else + clear_page(page_address(p)); } } diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index bf82601..7d759a4 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -308,9 +308,7 @@ int ttm_tt_swapin(struct ttm_tt *ttm) if (unlikely(to_page == NULL)) goto out_err; - preempt_disable(); copy_highpage(to_page, from_page); - preempt_enable(); page_cache_release(from_page); } @@ -358,9 +356,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage) ret = PTR_ERR(to_page); goto out_err; } - preempt_disable(); copy_highpage(to_page, from_page); - preempt_enable(); set_page_dirty(to_page); mark_page_accessed(to_page); page_cache_release(to_page); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index b07ca2e..7290811 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -110,6 +110,8 @@ int vmw_get_cap_3d_ioctl(struct drm_device *dev, void *data, memcpy_fromio(bounce, &fifo_mem[SVGA_FIFO_3D_CAPS], size); ret = copy_to_user(buffer, bounce, size); + if (ret) + ret = -EFAULT; vfree(bounce); if (unlikely(ret != 0)) diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index f676c01..6fcd466d0 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -46,9 +46,9 @@ static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[559] = 0x45; } /* the same as above (s/usage/physical/) */ - if ((quirks & MS_RDESC_3K) && *rsize == 106 && - !memcmp((char []){ 0x19, 0x00, 0x29, 0xff }, - &rdesc[94], 4)) { + if ((quirks & MS_RDESC_3K) && *rsize == 106 && rdesc[94] == 0x19 && + rdesc[95] == 0x00 && rdesc[96] == 0x29 && + rdesc[97] == 0xff) { rdesc[94] = 0x35; rdesc[96] = 0x45; } diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index 5f097f3..7fa5b24 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -169,7 +169,7 @@ static int __devinit i2c_mux_pinctrl_probe(struct platform_device *pdev) mux->busses = devm_kzalloc(&pdev->dev, sizeof(mux->busses) * mux->pdata->bus_count, GFP_KERNEL); - if (!mux->states) { + if (!mux->busses) { dev_err(&pdev->dev, "Cannot allocate busses\n"); ret = -ENOMEM; goto err; diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c index dc670cc..16c78f1 100644 --- a/drivers/irqchip/irq-bcm2835.c +++ b/drivers/irqchip/irq-bcm2835.c @@ -168,7 +168,8 @@ static int __init armctrl_of_init(struct device_node *node, } static struct of_device_id irq_of_match[] __initconst = { - { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init } + { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init }, + { } }; void __init bcm2835_init_irq(void) diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/ledtrig-cpu.c index b312056..4239b39 100644 --- a/drivers/leds/ledtrig-cpu.c +++ b/drivers/leds/ledtrig-cpu.c @@ -33,8 +33,6 @@ struct led_trigger_cpu { char name[MAX_NAME_LEN]; struct led_trigger *_trig; - struct mutex lock; - int lock_is_inited; }; static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig); @@ -50,12 +48,6 @@ void ledtrig_cpu(enum cpu_led_event ledevt) { struct led_trigger_cpu *trig = &__get_cpu_var(cpu_trig); - /* mutex lock should be initialized before calling mutex_call() */ - if (!trig->lock_is_inited) - return; - - mutex_lock(&trig->lock); - /* Locate the correct CPU LED */ switch (ledevt) { case CPU_LED_IDLE_END: @@ -75,8 +67,6 @@ void ledtrig_cpu(enum cpu_led_event ledevt) /* Will leave the LED as it is */ break; } - - mutex_unlock(&trig->lock); } EXPORT_SYMBOL(ledtrig_cpu); @@ -117,14 +107,9 @@ static int __init ledtrig_cpu_init(void) for_each_possible_cpu(cpu) { struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu); - mutex_init(&trig->lock); - snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu); - mutex_lock(&trig->lock); led_trigger_register_simple(trig->name, &trig->_trig); - trig->lock_is_inited = 1; - mutex_unlock(&trig->lock); } register_syscore_ops(&ledtrig_cpu_syscore_ops); @@ -142,15 +127,9 @@ static void __exit ledtrig_cpu_exit(void) for_each_possible_cpu(cpu) { struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu); - mutex_lock(&trig->lock); - led_trigger_unregister_simple(trig->_trig); trig->_trig = NULL; memset(trig->name, 0, MAX_NAME_LEN); - trig->lock_is_inited = 0; - - mutex_unlock(&trig->lock); - mutex_destroy(&trig->lock); } unregister_syscore_ops(&ledtrig_cpu_syscore_ops); diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 92317e9..60ac46f 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1860,10 +1860,14 @@ jme_open(struct net_device *netdev) jme_clear_pm(jme); JME_NAPI_ENABLE(jme); - tasklet_enable(&jme->linkch_task); - tasklet_enable(&jme->txclean_task); - tasklet_hi_enable(&jme->rxclean_task); - tasklet_hi_enable(&jme->rxempty_task); + tasklet_init(&jme->linkch_task, jme_link_change_tasklet, + (unsigned long) jme); + tasklet_init(&jme->txclean_task, jme_tx_clean_tasklet, + (unsigned long) jme); + tasklet_init(&jme->rxclean_task, jme_rx_clean_tasklet, + (unsigned long) jme); + tasklet_init(&jme->rxempty_task, jme_rx_empty_tasklet, + (unsigned long) jme); rc = jme_request_irq(jme); if (rc) @@ -3079,22 +3083,6 @@ jme_init_one(struct pci_dev *pdev, tasklet_init(&jme->pcc_task, jme_pcc_tasklet, (unsigned long) jme); - tasklet_init(&jme->linkch_task, - jme_link_change_tasklet, - (unsigned long) jme); - tasklet_init(&jme->txclean_task, - jme_tx_clean_tasklet, - (unsigned long) jme); - tasklet_init(&jme->rxclean_task, - jme_rx_clean_tasklet, - (unsigned long) jme); - tasklet_init(&jme->rxempty_task, - jme_rx_empty_tasklet, - (unsigned long) jme); - tasklet_disable_nosync(&jme->linkch_task); - tasklet_disable_nosync(&jme->txclean_task); - tasklet_disable_nosync(&jme->rxclean_task); - tasklet_disable_nosync(&jme->rxempty_task); jme->dpi.cur = PCC_P1; jme->reg_ghc = 0; diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index e558edd..69e0197 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -5459,8 +5459,10 @@ static int prepare_hardware(struct net_device *dev) rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev); if (rc) return rc; - tasklet_enable(&hw_priv->rx_tasklet); - tasklet_enable(&hw_priv->tx_tasklet); + tasklet_init(&hw_priv->rx_tasklet, rx_proc_task, + (unsigned long) hw_priv); + tasklet_init(&hw_priv->tx_tasklet, tx_proc_task, + (unsigned long) hw_priv); hw->promiscuous = 0; hw->all_multi = 0; @@ -7033,16 +7035,6 @@ static int __devinit pcidev_init(struct pci_dev *pdev, spin_lock_init(&hw_priv->hwlock); mutex_init(&hw_priv->lock); - /* tasklet is enabled. */ - tasklet_init(&hw_priv->rx_tasklet, rx_proc_task, - (unsigned long) hw_priv); - tasklet_init(&hw_priv->tx_tasklet, tx_proc_task, - (unsigned long) hw_priv); - - /* tasklet_enable will decrement the atomic counter. */ - tasklet_disable(&hw_priv->rx_tasklet); - tasklet_disable(&hw_priv->tx_tasklet); - for (i = 0; i < TOTAL_PORT_NUM; i++) init_waitqueue_head(&hw_priv->counter[i].counter); diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 62d1baf..c53c0f4 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2110,7 +2110,7 @@ static void __devinit smsc911x_read_mac_address(struct net_device *dev) static int __devinit smsc911x_init(struct net_device *dev) { struct smsc911x_data *pdata = netdev_priv(dev); - unsigned int byte_test; + unsigned int byte_test, mask; unsigned int to = 100; SMSC_TRACE(pdata, probe, "Driver Parameters:"); @@ -2130,9 +2130,22 @@ static int __devinit smsc911x_init(struct net_device *dev) /* * poll the READY bit in PMT_CTRL. Any other access to the device is * forbidden while this bit isn't set. Try for 100ms + * + * Note that this test is done before the WORD_SWAP register is + * programmed. So in some configurations the READY bit is at 16 before + * WORD_SWAP is written to. This issue is worked around by waiting + * until either bit 0 or bit 16 gets set in PMT_CTRL. + * + * SMSC has confirmed that checking bit 16 (marked as reserved in + * the datasheet) is fine since these bits "will either never be set + * or can only go high after READY does (so also indicate the device + * is ready)". */ - while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) + + mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_); + while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to) udelay(1000); + if (to == 0) { pr_err("Device not READY in 100ms aborting\n"); return -ENODEV; diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 4e98100..66e025a 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -917,7 +917,7 @@ static int tile_net_setup_interrupts(struct net_device *dev) ingress_irq = rc; tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU); rc = request_irq(ingress_irq, tile_net_handle_ingress_irq, - 0, NULL, NULL); + 0, "tile_net", NULL); if (rc != 0) { netdev_err(dev, "request_irq failed: %d\n", rc); destroy_irq(ingress_irq); diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 1d04754..77e6db9 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -942,6 +942,10 @@ static int axienet_open(struct net_device *ndev) phy_start(lp->phy_dev); } + /* Enable tasklets for Axi DMA error handling */ + tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, + (unsigned long) lp); + /* Enable interrupts for Axi DMA Tx */ ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev); if (ret) @@ -950,8 +954,7 @@ static int axienet_open(struct net_device *ndev) ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev); if (ret) goto err_rx_irq; - /* Enable tasklets for Axi DMA error handling */ - tasklet_enable(&lp->dma_err_tasklet); + return 0; err_rx_irq: @@ -960,6 +963,7 @@ err_tx_irq: if (lp->phy_dev) phy_disconnect(lp->phy_dev); lp->phy_dev = NULL; + tasklet_kill(&lp->dma_err_tasklet); dev_err(lp->dev, "request_irq() failed\n"); return ret; } @@ -1613,10 +1617,6 @@ static int __devinit axienet_of_probe(struct platform_device *op) goto err_iounmap_2; } - tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, - (unsigned long) lp); - tasklet_disable(&lp->dma_err_tasklet); - return 0; err_iounmap_2: diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c index 6428fcb..daec9b0 100644 --- a/drivers/net/phy/mdio-bitbang.c +++ b/drivers/net/phy/mdio-bitbang.c @@ -234,7 +234,6 @@ void free_mdio_bitbang(struct mii_bus *bus) struct mdiobb_ctrl *ctrl = bus->priv; module_put(ctrl->ops->owner); - mdiobus_unregister(bus); mdiobus_free(bus); } EXPORT_SYMBOL(free_mdio_bitbang); diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 4cd582a..74fab1a 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -540,10 +540,12 @@ advance: (ctx->ether_desc == NULL) || (ctx->control != intf)) goto error; - /* claim interfaces, if any */ - temp = usb_driver_claim_interface(driver, ctx->data, dev); - if (temp) - goto error; + /* claim data interface, if different from control */ + if (ctx->data != ctx->control) { + temp = usb_driver_claim_interface(driver, ctx->data, dev); + if (temp) + goto error; + } iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber; @@ -623,6 +625,10 @@ static void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf) tasklet_kill(&ctx->bh); + /* handle devices with combined control and data interface */ + if (ctx->control == ctx->data) + ctx->data = NULL; + /* disconnect master --> disconnect slave */ if (intf == ctx->control && ctx->data) { usb_set_intfdata(ctx->data, NULL); @@ -1245,6 +1251,14 @@ static const struct usb_device_id cdc_devs[] = { .driver_info = (unsigned long) &wwan_info, }, + /* Huawei NCM devices disguised as vendor specific */ + { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16), + .driver_info = (unsigned long)&wwan_info, + }, + { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46), + .driver_info = (unsigned long)&wwan_info, + }, + /* Generic CDC-NCM devices */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 3286166..362cb8c 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -184,7 +184,7 @@ static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx) /* set the address, index & direction (read from PHY) */ phy_id &= dev->mii.phy_id_mask; idx &= dev->mii.reg_num_mask; - addr = (phy_id << 11) | (idx << 6) | MII_READ_; + addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_; ret = smsc95xx_write_reg(dev, MII_ADDR, addr); check_warn_goto_done(ret, "Error writing MII_ADDR"); @@ -221,7 +221,7 @@ static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx, /* set the address, index & direction (write to PHY) */ phy_id &= dev->mii.phy_id_mask; idx &= dev->mii.reg_num_mask; - addr = (phy_id << 11) | (idx << 6) | MII_WRITE_; + addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_; ret = smsc95xx_write_reg(dev, MII_ADDR, addr); check_warn_goto_done(ret, "Error writing MII_ADDR"); diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 7b4adde..8b5c619 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1,5 +1,5 @@ /* - * VXLAN: Virtual eXtensiable Local Area Network + * VXLAN: Virtual eXtensible Local Area Network * * Copyright (c) 2012 Vyatta Inc. * @@ -50,8 +50,8 @@ #define VXLAN_N_VID (1u << 24) #define VXLAN_VID_MASK (VXLAN_N_VID - 1) -/* VLAN + IP header + UDP + VXLAN */ -#define VXLAN_HEADROOM (4 + 20 + 8 + 8) +/* IP header + UDP + VXLAN + Ethernet header */ +#define VXLAN_HEADROOM (20 + 8 + 8 + 14) #define VXLAN_FLAGS 0x08000000 /* struct vxlanhdr.vx_flags required value. */ @@ -1102,6 +1102,10 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, if (!tb[IFLA_MTU]) dev->mtu = lowerdev->mtu - VXLAN_HEADROOM; + + /* update header length based on lower device */ + dev->hard_header_len = lowerdev->hard_header_len + + VXLAN_HEADROOM; } if (data[IFLA_VXLAN_TOS]) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index a6f1e81..481345c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4401,7 +4401,7 @@ static s32 brcmf_mode_to_nl80211_iftype(s32 mode) static void brcmf_wiphy_pno_params(struct wiphy *wiphy) { -#ifndef CONFIG_BRCMFISCAN +#ifndef CONFIG_BRCMISCAN /* scheduled scan settings */ wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT; wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT; diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index ff8162d..fa4d1b8 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -521,7 +521,7 @@ static void iwlagn_mac_tx(struct ieee80211_hw *hw, ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); if (iwlagn_tx_skb(priv, control->sta, skb)) - dev_kfree_skb_any(skb); + ieee80211_free_txskb(hw, skb); } static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index 7ff3f14..408132c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -2114,7 +2114,7 @@ static void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) info = IEEE80211_SKB_CB(skb); iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]); - dev_kfree_skb_any(skb); + ieee80211_free_txskb(priv->hw, skb); } static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 17c8e5d..bb69f8f 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -321,6 +321,14 @@ static void iwl_rx_allocate(struct iwl_trans *trans, gfp_t priority) dma_map_page(trans->dev, page, 0, PAGE_SIZE << trans_pcie->rx_page_order, DMA_FROM_DEVICE); + if (dma_mapping_error(trans->dev, rxb->page_dma)) { + rxb->page = NULL; + spin_lock_irqsave(&rxq->lock, flags); + list_add(&rxb->list, &rxq->rx_used); + spin_unlock_irqrestore(&rxq->lock, flags); + __free_pages(page, trans_pcie->rx_page_order); + return; + } /* dma address must be no more than 36 bits */ BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); /* and also 256 byte aligned! */ @@ -488,8 +496,19 @@ static void iwl_rx_handle_rxbuf(struct iwl_trans *trans, dma_map_page(trans->dev, rxb->page, 0, PAGE_SIZE << trans_pcie->rx_page_order, DMA_FROM_DEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; + if (dma_mapping_error(trans->dev, rxb->page_dma)) { + /* + * free the page(s) as well to not break + * the invariant that the items on the used + * list have no page(s) + */ + __free_pages(rxb->page, trans_pcie->rx_page_order); + rxb->page = NULL; + list_add_tail(&rxb->list, &rxq->rx_used); + } else { + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + } } else list_add_tail(&rxb->list, &rxq->rx_used); spin_unlock_irqrestore(&rxq->lock, flags); diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index c17ae22..0c6fcb4 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -401,7 +401,7 @@ EXPORT_SYMBOL_GPL(rio_release_inb_pwrite); /** * rio_map_inb_region -- Map inbound memory region. * @mport: Master port. - * @lstart: physical address of memory region to be mapped + * @local: physical address of memory region to be mapped * @rbase: RIO base address assigned to this window * @size: Size of the memory region * @rflags: Flags for mapping. diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 5c4829c..e872c8b 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1381,22 +1381,14 @@ struct regulator *regulator_get_exclusive(struct device *dev, const char *id) } EXPORT_SYMBOL_GPL(regulator_get_exclusive); -/** - * regulator_put - "free" the regulator source - * @regulator: regulator source - * - * Note: drivers must ensure that all regulator_enable calls made on this - * regulator source are balanced by regulator_disable calls prior to calling - * this function. - */ -void regulator_put(struct regulator *regulator) +/* Locks held by regulator_put() */ +static void _regulator_put(struct regulator *regulator) { struct regulator_dev *rdev; if (regulator == NULL || IS_ERR(regulator)) return; - mutex_lock(®ulator_list_mutex); rdev = regulator->rdev; debugfs_remove_recursive(regulator->debugfs); @@ -1412,6 +1404,20 @@ void regulator_put(struct regulator *regulator) rdev->exclusive = 0; module_put(rdev->owner); +} + +/** + * regulator_put - "free" the regulator source + * @regulator: regulator source + * + * Note: drivers must ensure that all regulator_enable calls made on this + * regulator source are balanced by regulator_disable calls prior to calling + * this function. + */ +void regulator_put(struct regulator *regulator) +{ + mutex_lock(®ulator_list_mutex); + _regulator_put(regulator); mutex_unlock(®ulator_list_mutex); } EXPORT_SYMBOL_GPL(regulator_put); @@ -1974,7 +1980,7 @@ int regulator_is_supported_voltage(struct regulator *regulator, if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { ret = regulator_get_voltage(regulator); if (ret >= 0) - return (min_uV >= ret && ret <= max_uV); + return (min_uV <= ret && ret <= max_uV); else return ret; } @@ -3365,7 +3371,7 @@ regulator_register(const struct regulator_desc *regulator_desc, if (ret != 0) { rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", config->ena_gpio, ret); - goto clean; + goto wash; } rdev->ena_gpio = config->ena_gpio; @@ -3445,10 +3451,11 @@ unset_supplies: scrub: if (rdev->supply) - regulator_put(rdev->supply); + _regulator_put(rdev->supply); if (rdev->ena_gpio) gpio_free(rdev->ena_gpio); kfree(rdev->constraints); +wash: device_unregister(&rdev->dev); /* device core frees rdev */ rdev = ERR_PTR(ret); diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 9ffb6d5..4ed343e 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -44,7 +44,6 @@ #define RAW3215_NR_CCWS 3 #define RAW3215_TIMEOUT HZ/10 /* time for delayed output */ -#define RAW3215_FIXED 1 /* 3215 console device is not be freed */ #define RAW3215_WORKING 4 /* set if a request is being worked on */ #define RAW3215_THROTTLED 8 /* set if reading is disabled */ #define RAW3215_STOPPED 16 /* set if writing is disabled */ @@ -339,8 +338,10 @@ static void raw3215_wakeup(unsigned long data) struct tty_struct *tty; tty = tty_port_tty_get(&raw->port); - tty_wakeup(tty); - tty_kref_put(tty); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } } /* @@ -629,8 +630,7 @@ static void raw3215_shutdown(struct raw3215_info *raw) DECLARE_WAITQUEUE(wait, current); unsigned long flags; - if (!(raw->port.flags & ASYNC_INITIALIZED) || - (raw->flags & RAW3215_FIXED)) + if (!(raw->port.flags & ASYNC_INITIALIZED)) return; /* Wait for outstanding requests, then free irq */ spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); @@ -926,8 +926,6 @@ static int __init con3215_init(void) dev_set_drvdata(&cdev->dev, raw); cdev->handler = raw3215_irq; - raw->flags |= RAW3215_FIXED; - /* Request the console irq */ if (raw3215_startup(raw) != 0) { raw3215_free_info(raw); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 3e25d315..4d6ba00 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2942,13 +2942,33 @@ static int qeth_query_ipassists_cb(struct qeth_card *card, QETH_DBF_TEXT(SETUP, 2, "qipasscb"); cmd = (struct qeth_ipa_cmd *) data; + + switch (cmd->hdr.return_code) { + case IPA_RC_NOTSUPP: + case IPA_RC_L2_UNSUPPORTED_CMD: + QETH_DBF_TEXT(SETUP, 2, "ipaunsup"); + card->options.ipa4.supported_funcs |= IPA_SETADAPTERPARMS; + card->options.ipa6.supported_funcs |= IPA_SETADAPTERPARMS; + return -0; + default: + if (cmd->hdr.return_code) { + QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Unhandled " + "rc=%d\n", + dev_name(&card->gdev->dev), + cmd->hdr.return_code); + return 0; + } + } + if (cmd->hdr.prot_version == QETH_PROT_IPV4) { card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported; card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled; - } else { + } else if (cmd->hdr.prot_version == QETH_PROT_IPV6) { card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported; card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled; - } + } else + QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Flawed LIC detected" + "\n", dev_name(&card->gdev->dev)); QETH_DBF_TEXT(SETUP, 2, "suppenbl"); QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_supported); QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_enabled); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index e67e025..fddb626 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -626,10 +626,13 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card) QETH_DBF_TEXT(SETUP, 2, "doL2init"); QETH_DBF_TEXT_(SETUP, 2, "doL2%s", CARD_BUS_ID(card)); - rc = qeth_query_setadapterparms(card); - if (rc) { - QETH_DBF_MESSAGE(2, "could not query adapter parameters on " - "device %s: x%x\n", CARD_BUS_ID(card), rc); + if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) { + rc = qeth_query_setadapterparms(card); + if (rc) { + QETH_DBF_MESSAGE(2, "could not query adapter " + "parameters on device %s: x%x\n", + CARD_BUS_ID(card), rc); + } } if (card->info.type == QETH_CARD_TYPE_IQD || @@ -676,7 +679,7 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p) return -ERESTARTSYS; } rc = qeth_l2_send_delmac(card, &card->dev->dev_addr[0]); - if (!rc) + if (!rc || (rc == IPA_RC_L2_MAC_NOT_FOUND)) rc = qeth_l2_send_setmac(card, addr->sa_data); return rc ? -EINVAL : 0; } diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h index f2ffd96..d0cafd6 100644 --- a/drivers/staging/android/android_alarm.h +++ b/drivers/staging/android/android_alarm.h @@ -51,12 +51,10 @@ enum android_alarm_return_flags { #define ANDROID_ALARM_WAIT _IO('a', 1) #define ALARM_IOW(c, type, size) _IOW('a', (c) | ((type) << 4), size) -#define ALARM_IOR(c, type, size) _IOR('a', (c) | ((type) << 4), size) - /* Set alarm */ #define ANDROID_ALARM_SET(type) ALARM_IOW(2, type, struct timespec) #define ANDROID_ALARM_SET_AND_WAIT(type) ALARM_IOW(3, type, struct timespec) -#define ANDROID_ALARM_GET_TIME(type) ALARM_IOR(4, type, struct timespec) +#define ANDROID_ALARM_GET_TIME(type) ALARM_IOW(4, type, struct timespec) #define ANDROID_ALARM_SET_RTC _IOW('a', 5, struct timespec) #define ANDROID_ALARM_BASE_CMD(cmd) (cmd & ~(_IOC(0, 0, 0xf0, 0))) #define ANDROID_ALARM_IOCTL_TO_TYPE(cmd) (_IOC_NR(cmd) >> 4) diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index a5dec1c..13ee53b 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -424,7 +424,6 @@ static void hvc_hangup(struct tty_struct *tty) { struct hvc_struct *hp = tty->driver_data; unsigned long flags; - int temp_open_count; if (!hp) return; @@ -444,7 +443,6 @@ static void hvc_hangup(struct tty_struct *tty) return; } - temp_open_count = hp->port.count; hp->port.count = 0; spin_unlock_irqrestore(&hp->port.lock, flags); tty_port_tty_set(&hp->port, NULL); @@ -453,11 +451,6 @@ static void hvc_hangup(struct tty_struct *tty) if (hp->ops->notifier_hangup) hp->ops->notifier_hangup(hp, hp->data); - - while(temp_open_count) { - --temp_open_count; - tty_port_put(&hp->port); - } } /* diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 2bc28a5..1ab1d2c 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1239,6 +1239,7 @@ static int __devexit max310x_remove(struct spi_device *spi) static const struct spi_device_id max310x_id_table[] = { { "max3107", MAX310X_TYPE_MAX3107 }, { "max3108", MAX310X_TYPE_MAX3108 }, + { } }; MODULE_DEVICE_TABLE(spi, max310x_id_table); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index eaa1451..4225d5e 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2166,8 +2166,15 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum); irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; + unsigned long flags; irqreturn_t rc; + /* IRQF_DISABLED doesn't work correctly with shared IRQs + * when the first handler doesn't use it. So let's just + * assume it's never used. + */ + local_irq_save(flags); + if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) rc = IRQ_NONE; else if (hcd->driver->irq(hcd) == IRQ_NONE) @@ -2175,6 +2182,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) else rc = IRQ_HANDLED; + local_irq_restore(flags); return rc; } EXPORT_SYMBOL_GPL(usb_hcd_irq); @@ -2362,6 +2370,14 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, int retval; if (hcd->driver->irq) { + + /* IRQF_DISABLED doesn't work as advertised when used together + * with IRQF_SHARED. As usb_hcd_irq() will always disable + * interrupts we can remove it here. + */ + if (irqflags & IRQF_SHARED) + irqflags &= ~IRQF_DISABLED; + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); retval = request_irq(irqnum, &usb_hcd_irq, irqflags, diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 28b9790..4f23b12 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -707,11 +707,12 @@ static void rxstate(struct musb *musb, struct musb_request *req) fifo_count = musb_readw(epio, MUSB_RXCOUNT); /* - * use mode 1 only if we expect data of at least ep packet_sz - * and have not yet received a short packet + * Enable Mode 1 on RX transfers only when short_not_ok flag + * is set. Currently short_not_ok flag is set only from + * file_storage and f_mass_storage drivers */ - if ((request->length - request->actual >= musb_ep->packet_sz) && - (fifo_count >= musb_ep->packet_sz)) + + if (request->short_not_ok && fifo_count == musb_ep->packet_sz) use_mode_1 = 1; else use_mode_1 = 0; @@ -727,6 +728,27 @@ static void rxstate(struct musb *musb, struct musb_request *req) c = musb->dma_controller; channel = musb_ep->dma; + /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in + * mode 0 only. So we do not get endpoint interrupts due to DMA + * completion. We only get interrupts from DMA controller. + * + * We could operate in DMA mode 1 if we knew the size of the tranfer + * in advance. For mass storage class, request->length = what the host + * sends, so that'd work. But for pretty much everything else, + * request->length is routinely more than what the host sends. For + * most these gadgets, end of is signified either by a short packet, + * or filling the last byte of the buffer. (Sending extra data in + * that last pckate should trigger an overflow fault.) But in mode 1, + * we don't get DMA completion interrupt for short packets. + * + * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1), + * to get endpoint interrupt on every DMA req, but that didn't seem + * to work reliably. + * + * REVISIT an updated g_file_storage can set req->short_not_ok, which + * then becomes usable as a runtime "use mode 1" hint... + */ + /* Experimental: Mode1 works with mass storage use cases */ if (use_mode_1) { csr |= MUSB_RXCSR_AUTOCLEAR; diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index d8c8a42..6223062 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -58,7 +58,7 @@ config USB_ULPI_VIEWPORT config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL4030 @@ -68,7 +68,7 @@ config TWL4030_USB config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" - depends on TWL4030_CORE && OMAP_USB2 + depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL6030 diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 991ca6a..97bc49f 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -2426,7 +2426,7 @@ static void keyspan_release(struct usb_serial *serial) static int keyspan_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - struct keyspan_port_private *s_priv; + struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; struct callbacks *cback; @@ -2441,7 +2441,6 @@ static int keyspan_port_probe(struct usb_serial_port *port) if (!p_priv) return -ENOMEM; - s_priv = usb_get_serial_data(port->serial); p_priv->device_details = d_details; /* Setup values for the various callback routines */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5839f4d..ed66056 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -157,6 +157,7 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001 +#define NOVATELWIRELESS_PRODUCT_E362 0x9010 #define NOVATELWIRELESS_PRODUCT_G1 0xA001 #define NOVATELWIRELESS_PRODUCT_G1_M 0xA002 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 @@ -192,6 +193,9 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181 #define DELL_PRODUCT_5730_MINICARD_VZW 0x8182 +#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */ +#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */ + #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a @@ -282,6 +286,7 @@ static void option_instat_callback(struct urb *urb); /* ALCATEL PRODUCTS */ #define ALCATEL_VENDOR_ID 0x1bbb #define ALCATEL_PRODUCT_X060S_X200 0x0000 +#define ALCATEL_PRODUCT_X220_X500D 0x0017 #define PIRELLI_VENDOR_ID 0x1266 #define PIRELLI_PRODUCT_C100_1 0x1002 @@ -705,6 +710,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) }, /* Novatel Ovation MC551 a.k.a. Verizon USB551L */ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, @@ -727,6 +733,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, @@ -1156,6 +1164,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 2be2b5b..01c94aa 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -454,9 +454,6 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, struct usb_serial *serial = port->serial; struct urb *urb; - if (endpoint == -1) - return NULL; /* endpoint not needed */ - urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { dev_dbg(&serial->interface->dev, @@ -488,6 +485,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port) init_usb_anchor(&portdata->delayed); for (i = 0; i < N_IN_URB; i++) { + if (!port->bulk_in_size) + break; + buffer = (u8 *)__get_free_page(GFP_KERNEL); if (!buffer) goto bail_out_error; @@ -501,8 +501,8 @@ int usb_wwan_port_probe(struct usb_serial_port *port) } for (i = 0; i < N_OUT_URB; i++) { - if (port->bulk_out_endpointAddress == -1) - continue; + if (!port->bulk_out_size) + break; buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); if (!buffer) |