diff options
author | Christoph Hellwig <hch@lst.de> | 2016-09-19 15:50:48 (GMT) |
---|---|---|
committer | Martin K. Petersen <martin.petersen@oracle.com> | 2016-09-27 00:49:24 (GMT) |
commit | 2393b111ed8839e58e6590998483748b1efb35ff (patch) | |
tree | e13207967d938532854265f3ae9139e9ceed69b1 /drivers | |
parent | 9b3a34fb2125141720515b79ed2228545645a7bc (diff) | |
download | linux-2393b111ed8839e58e6590998483748b1efb35ff.tar.xz |
scsi: in2000: remove from tree
The driver has not seen any maintainer activity or other work that
wasn't tree wide conversion or clenaups in the entire history of
the git tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/scsi/Kconfig | 12 | ||||
-rw-r--r-- | drivers/scsi/Makefile | 1 | ||||
-rw-r--r-- | drivers/scsi/in2000.c | 2302 | ||||
-rw-r--r-- | drivers/scsi/in2000.h | 412 |
4 files changed, 0 insertions, 2727 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 15c6e9f..543005b 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -500,18 +500,6 @@ config SCSI_ADVANSYS To compile this driver as a module, choose M here: the module will be called advansys. -config SCSI_IN2000 - tristate "Always IN2000 SCSI support" - depends on ISA && SCSI - help - This is support for an ISA bus SCSI host adapter. You'll find more - information in <file:Documentation/scsi/in2000.txt>. If it doesn't work - out of the box, you may have to change the jumpers for IRQ or - address selection. - - To compile this driver as a module, choose M here: the - module will be called in2000. - config SCSI_ARCMSR tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index d870cc5..07bf799 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -75,7 +75,6 @@ obj-$(CONFIG_SCSI_PM8001) += pm8001/ obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_IPS) += ips.o obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o -obj-$(CONFIG_SCSI_IN2000) += in2000.o obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o obj-$(CONFIG_SCSI_GENERIC_NCR5380_MMIO) += g_NCR5380_mmio.o obj-$(CONFIG_SCSI_NCR53C406A) += NCR53c406a.o diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c deleted file mode 100644 index 3882d9f..0000000 --- a/drivers/scsi/in2000.c +++ /dev/null @@ -1,2302 +0,0 @@ -/* - * in2000.c - Linux device driver for the - * Always IN2000 ISA SCSI card. - * - * Copyright (c) 1996 John Shifflett, GeoLog Consulting - * john@geolog.com - * jshiffle@netcom.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * For the avoidance of doubt the "preferred form" of this code is one which - * is in an open non patent encumbered format. Where cryptographic key signing - * forms part of the process of creating an executable the information - * including keys needed to generate an equivalently functional executable - * are deemed to be part of the source code. - * - * Drew Eckhardt's excellent 'Generic NCR5380' sources provided - * much of the inspiration and some of the code for this driver. - * The Linux IN2000 driver distributed in the Linux kernels through - * version 1.2.13 was an extremely valuable reference on the arcane - * (and still mysterious) workings of the IN2000's fifo. It also - * is where I lifted in2000_biosparam(), the gist of the card - * detection scheme, and other bits of code. Many thanks to the - * talented and courageous people who wrote, contributed to, and - * maintained that driver (including Brad McLean, Shaun Savage, - * Bill Earnest, Larry Doolittle, Roger Sunshine, John Luckey, - * Matt Postiff, Peter Lu, zerucha@shell.portal.com, and Eric - * Youngdale). I should also mention the driver written by - * Hamish Macdonald for the (GASP!) Amiga A2091 card, included - * in the Linux-m68k distribution; it gave me a good initial - * understanding of the proper way to run a WD33c93 chip, and I - * ended up stealing lots of code from it. - * - * _This_ driver is (I feel) an improvement over the old one in - * several respects: - * - All problems relating to the data size of a SCSI request are - * gone (as far as I know). The old driver couldn't handle - * swapping to partitions because that involved 4k blocks, nor - * could it deal with the st.c tape driver unmodified, because - * that usually involved 4k - 32k blocks. The old driver never - * quite got away from a morbid dependence on 2k block sizes - - * which of course is the size of the card's fifo. - * - * - Target Disconnection/Reconnection is now supported. Any - * system with more than one device active on the SCSI bus - * will benefit from this. The driver defaults to what I'm - * calling 'adaptive disconnect' - meaning that each command - * is evaluated individually as to whether or not it should - * be run with the option to disconnect/reselect (if the - * device chooses), or as a "SCSI-bus-hog". - * - * - Synchronous data transfers are now supported. Because there - * are a few devices (and many improperly terminated systems) - * that choke when doing sync, the default is sync DISABLED - * for all devices. This faster protocol can (and should!) - * be enabled on selected devices via the command-line. - * - * - Runtime operating parameters can now be specified through - * either the LILO or the 'insmod' command line. For LILO do: - * "in2000=blah,blah,blah" - * and with insmod go like: - * "insmod /usr/src/linux/modules/in2000.o setup_strings=blah,blah" - * The defaults should be good for most people. See the comment - * for 'setup_strings' below for more details. - * - * - The old driver relied exclusively on what the Western Digital - * docs call "Combination Level 2 Commands", which are a great - * idea in that the CPU is relieved of a lot of interrupt - * overhead. However, by accepting a certain (user-settable) - * amount of additional interrupts, this driver achieves - * better control over the SCSI bus, and data transfers are - * almost as fast while being much easier to define, track, - * and debug. - * - * - You can force detection of a card whose BIOS has been disabled. - * - * - Multiple IN2000 cards might almost be supported. I've tried to - * keep it in mind, but have no way to test... - * - * - * TODO: - * tagged queuing. multiple cards. - * - * - * NOTE: - * When using this or any other SCSI driver as a module, you'll - * find that with the stock kernel, at most _two_ SCSI hard - * drives will be linked into the device list (ie, usable). - * If your IN2000 card has more than 2 disks on its bus, you - * might want to change the define of 'SD_EXTRA_DEVS' in the - * 'hosts.h' file from 2 to whatever is appropriate. It took - * me a while to track down this surprisingly obscure and - * undocumented little "feature". - * - * - * People with bug reports, wish-lists, complaints, comments, - * or improvements are asked to pah-leeez email me (John Shifflett) - * at john@geolog.com or jshiffle@netcom.com! I'm anxious to get - * this thing into as good a shape as possible, and I'm positive - * there are lots of lurking bugs and "Stupid Places". - * - * Updated for Linux 2.5 by Alan Cox <alan@lxorguk.ukuu.org.uk> - * - Using new_eh handler - * - Hopefully got all the locking right again - * See "FIXME" notes for items that could do with more work - */ - -#include <linux/module.h> -#include <linux/blkdev.h> -#include <linux/interrupt.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/proc_fs.h> -#include <linux/ioport.h> -#include <linux/stat.h> - -#include <asm/io.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> - -#define IN2000_VERSION "1.33-2.5" -#define IN2000_DATE "2002/11/03" - -#include "in2000.h" - - -/* - * 'setup_strings' is a single string used to pass operating parameters and - * settings from the kernel/module command-line to the driver. 'setup_args[]' - * is an array of strings that define the compile-time default values for - * these settings. If Linux boots with a LILO or insmod command-line, those - * settings are combined with 'setup_args[]'. Note that LILO command-lines - * are prefixed with "in2000=" while insmod uses a "setup_strings=" prefix. - * The driver recognizes the following keywords (lower case required) and - * arguments: - * - * - ioport:addr -Where addr is IO address of a (usually ROM-less) card. - * - noreset -No optional args. Prevents SCSI bus reset at boot time. - * - nosync:x -x is a bitmask where the 1st 7 bits correspond with - * the 7 possible SCSI devices (bit 0 for device #0, etc). - * Set a bit to PREVENT sync negotiation on that device. - * The driver default is sync DISABLED on all devices. - * - period:ns -ns is the minimum # of nanoseconds in a SCSI data transfer - * period. Default is 500; acceptable values are 250 - 1000. - * - disconnect:x -x = 0 to never allow disconnects, 2 to always allow them. - * x = 1 does 'adaptive' disconnects, which is the default - * and generally the best choice. - * - debug:x -If 'DEBUGGING_ON' is defined, x is a bitmask that causes - * various types of debug output to printed - see the DB_xxx - * defines in in2000.h - * - proc:x -If 'PROC_INTERFACE' is defined, x is a bitmask that - * determines how the /proc interface works and what it - * does - see the PR_xxx defines in in2000.h - * - * Syntax Notes: - * - Numeric arguments can be decimal or the '0x' form of hex notation. There - * _must_ be a colon between a keyword and its numeric argument, with no - * spaces. - * - Keywords are separated by commas, no spaces, in the standard kernel - * command-line manner. - * - A keyword in the 'nth' comma-separated command-line member will overwrite - * the 'nth' element of setup_args[]. A blank command-line member (in - * other words, a comma with no preceding keyword) will _not_ overwrite - * the corresponding setup_args[] element. - * - * A few LILO examples (for insmod, use 'setup_strings' instead of 'in2000'): - * - in2000=ioport:0x220,noreset - * - in2000=period:250,disconnect:2,nosync:0x03 - * - in2000=debug:0x1e - * - in2000=proc:3 - */ - -/* Normally, no defaults are specified... */ -static char *setup_args[] = { "", "", "", "", "", "", "", "", "" }; - -/* filled in by 'insmod' */ -static char *setup_strings; - -module_param(setup_strings, charp, 0); - -static inline uchar read_3393(struct IN2000_hostdata *hostdata, uchar reg_num) -{ - write1_io(reg_num, IO_WD_ADDR); - return read1_io(IO_WD_DATA); -} - - -#define READ_AUX_STAT() read1_io(IO_WD_ASR) - - -static inline void write_3393(struct IN2000_hostdata *hostdata, uchar reg_num, uchar value) -{ - write1_io(reg_num, IO_WD_ADDR); - write1_io(value, IO_WD_DATA); -} - - -static inline void write_3393_cmd(struct IN2000_hostdata *hostdata, uchar cmd) -{ -/* while (READ_AUX_STAT() & ASR_CIP) - printk("|");*/ - write1_io(WD_COMMAND, IO_WD_ADDR); - write1_io(cmd, IO_WD_DATA); -} - - -static uchar read_1_byte(struct IN2000_hostdata *hostdata) -{ - uchar asr, x = 0; - - write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED); - write_3393_cmd(hostdata, WD_CMD_TRANS_INFO | 0x80); - do { - asr = READ_AUX_STAT(); - if (asr & ASR_DBR) - x = read_3393(hostdata, WD_DATA); - } while (!(asr & ASR_INT)); - return x; -} - - -static void write_3393_count(struct IN2000_hostdata *hostdata, unsigned long value) -{ - write1_io(WD_TRANSFER_COUNT_MSB, IO_WD_ADDR); - write1_io((value >> 16), IO_WD_DATA); - write1_io((value >> 8), IO_WD_DATA); - write1_io(value, IO_WD_DATA); -} - - -static unsigned long read_3393_count(struct IN2000_hostdata *hostdata) -{ - unsigned long value; - - write1_io(WD_TRANSFER_COUNT_MSB, IO_WD_ADDR); - value = read1_io(IO_WD_DATA) << 16; - value |= read1_io(IO_WD_DATA) << 8; - value |= read1_io(IO_WD_DATA); - return value; -} - - -/* The 33c93 needs to be told which direction a command transfers its - * data; we use this function to figure it out. Returns true if there - * will be a DATA_OUT phase with this command, false otherwise. - * (Thanks to Joerg Dorchain for the research and suggestion.) - */ -static int is_dir_out(Scsi_Cmnd * cmd) -{ - switch (cmd->cmnd[0]) { - case WRITE_6: - case WRITE_10: - case WRITE_12: - case WRITE_LONG: - case WRITE_SAME: - case WRITE_BUFFER: - case WRITE_VERIFY: - case WRITE_VERIFY_12: - case COMPARE: - case COPY: - case COPY_VERIFY: - case SEARCH_EQUAL: - case SEARCH_HIGH: - case SEARCH_LOW: - case SEARCH_EQUAL_12: - case SEARCH_HIGH_12: - case SEARCH_LOW_12: - case FORMAT_UNIT: - case REASSIGN_BLOCKS: - case RESERVE: - case MODE_SELECT: - case MODE_SELECT_10: - case LOG_SELECT: - case SEND_DIAGNOSTIC: - case CHANGE_DEFINITION: - case UPDATE_BLOCK: - case SET_WINDOW: - case MEDIUM_SCAN: - case SEND_VOLUME_TAG: - case 0xea: - return 1; - default: - return 0; - } -} - - - -static struct sx_period sx_table[] = { - {1, 0x20}, - {252, 0x20}, - {376, 0x30}, - {500, 0x40}, - {624, 0x50}, - {752, 0x60}, - {876, 0x70}, - {1000, 0x00}, - {0, 0} -}; - -static int round_period(unsigned int period) -{ - int x; - - for (x = 1; sx_table[x].period_ns; x++) { - if ((period <= sx_table[x - 0].period_ns) && (period > sx_table[x - 1].period_ns)) { - return x; - } - } - return 7; -} - -static uchar calc_sync_xfer(unsigned int period, unsigned int offset) -{ - uchar result; - - period *= 4; /* convert SDTR code to ns */ - result = sx_table[round_period(period)].reg_value; - result |= (offset < OPTIMUM_SX_OFF) ? offset : OPTIMUM_SX_OFF; - return result; -} - - - -static void in2000_execute(struct Scsi_Host *instance); - -static int in2000_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)) -{ - struct Scsi_Host *instance; - struct IN2000_hostdata *hostdata; - Scsi_Cmnd *tmp; - - instance = cmd->device->host; - hostdata = (struct IN2000_hostdata *) instance->hostdata; - - DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x(", cmd->cmnd[0])) - -/* Set up a few fields in the Scsi_Cmnd structure for our own use: - * - host_scribble is the pointer to the next cmd in the input queue - * - scsi_done points to the routine we call when a cmd is finished - * - result is what you'd expect - */ - cmd->host_scribble = NULL; - cmd->scsi_done = done; - cmd->result = 0; - -/* We use the Scsi_Pointer structure that's included with each command - * as a scratchpad (as it's intended to be used!). The handy thing about - * the SCp.xxx fields is that they're always associated with a given - * cmd, and are preserved across disconnect-reselect. This means we - * can pretty much ignore SAVE_POINTERS and RESTORE_POINTERS messages - * if we keep all the critical pointers and counters in SCp: - * - SCp.ptr is the pointer into the RAM buffer - * - SCp.this_residual is the size of that buffer - * - SCp.buffer points to the current scatter-gather buffer - * - SCp.buffers_residual tells us how many S.G. buffers there are - * - SCp.have_data_in helps keep track of >2048 byte transfers - * - SCp.sent_command is not used - * - SCp.phase records this command's SRCID_ER bit setting - */ - - if (scsi_bufflen(cmd)) { - cmd->SCp.buffer = scsi_sglist(cmd); - cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; - cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); - cmd->SCp.this_residual = cmd->SCp.buffer->length; - } else { - cmd->SCp.buffer = NULL; - cmd->SCp.buffers_residual = 0; - cmd->SCp.ptr = NULL; - cmd->SCp.this_residual = 0; - } - cmd->SCp.have_data_in = 0; - -/* We don't set SCp.phase here - that's done in in2000_execute() */ - -/* WD docs state that at the conclusion of a "LEVEL2" command, the - * status byte can be retrieved from the LUN register. Apparently, - * this is the case only for *uninterrupted* LEVEL2 commands! If - * there are any unexpected phases entered, even if they are 100% - * legal (different devices may choose to do things differently), - * the LEVEL2 command sequence is exited. This often occurs prior - * to receiving the status byte, in which case the driver does a - * status phase interrupt and gets the status byte on its own. - * While such a command can then be "resumed" (ie restarted to - * finish up as a LEVEL2 command), the LUN register will NOT be - * a valid status byte at the command's conclusion, and we must - * use the byte obtained during the earlier interrupt. Here, we - * preset SCp.Status to an illegal value (0xff) so that when - * this command finally completes, we can tell where the actual - * status byte is stored. - */ - - cmd->SCp.Status = ILLEGAL_STATUS_BYTE; - -/* We need to disable interrupts before messing with the input - * queue and calling in2000_execute(). - */ - - /* - * Add the cmd to the end of 'input_Q'. Note that REQUEST_SENSE - * commands are added to the head of the queue so that the desired - * sense data is not lost before REQUEST_SENSE executes. - */ - - if (!(hostdata->input_Q) || (cmd->cmnd[0] == REQUEST_SENSE)) { - cmd->host_scribble = (uchar *) hostdata->input_Q; - hostdata->input_Q = cmd; - } else { /* find the end of the queue */ - for (tmp = (Scsi_Cmnd *) hostdata->input_Q; tmp->host_scribble; tmp = (Scsi_Cmnd *) tmp->host_scribble); - tmp->host_scribble = (uchar *) cmd; - } - -/* We know that there's at least one command in 'input_Q' now. - * Go see if any of them are runnable! - */ - - in2000_execute(cmd->device->host); - - DB(DB_QUEUE_COMMAND, printk(")Q ")) - return 0; -} - -static DEF_SCSI_QCMD(in2000_queuecommand) - - - -/* - * This routine attempts to start a scsi command. If the host_card is - * already connected, we give up immediately. Otherwise, look through - * the input_Q, using the first command we find that's intended - * for a currently non-busy target/lun. - * Note that this function is always called with interrupts already - * disabled (either from in2000_queuecommand() or in2000_intr()). - */ -static void in2000_execute(struct Scsi_Host *instance) -{ - struct IN2000_hostdata *hostdata; - Scsi_Cmnd *cmd, *prev; - int i; - unsigned short *sp; - unsigned short f; - unsigned short flushbuf[16]; - - - hostdata = (struct IN2000_hostdata *) instance->hostdata; - - DB(DB_EXECUTE, printk("EX(")) - - if (hostdata->selecting || hostdata->connected) { - - DB(DB_EXECUTE, printk(")EX-0 ")) - - return; - } - - /* - * Search through the input_Q for a command destined - * for an idle target/lun. - */ - - cmd = (Scsi_Cmnd *) hostdata->input_Q; - prev = NULL; - while (cmd) { - if (!(hostdata->busy[cmd->device->id] & (1 << cmd->device->lun))) - break; - prev = cmd; - cmd = (Scsi_Cmnd *) cmd->host_scribble; - } - - /* quit if queue empty or all possible targets are busy */ - - if (!cmd) { - - DB(DB_EXECUTE, printk(")EX-1 ")) - - return; - } - - /* remove command from queue */ - - if (prev) - prev->host_scribble = cmd->host_scribble; - else - hostdata->input_Q = (Scsi_Cmnd *) cmd->host_scribble; - -#ifdef PROC_STATISTICS - hostdata->cmd_cnt[cmd->device->id]++; -#endif - -/* - * Start the selection process - */ - - if (is_dir_out(cmd)) - write_3393(hostdata, WD_DESTINATION_ID, cmd->device->id); - else - write_3393(hostdata, WD_DESTINATION_ID, cmd->device->id | DSTID_DPD); - -/* Now we need to figure out whether or not this command is a good - * candidate for disconnect/reselect. We guess to the best of our - * ability, based on a set of hierarchical rules. When several - * devices are operating simultaneously, disconnects are usually - * an advantage. In a single device system, or if only 1 device - * is being accessed, transfers usually go faster if disconnects - * are not allowed: - * - * + Commands should NEVER disconnect if hostdata->disconnect = - * DIS_NEVER (this holds for tape drives also), and ALWAYS - * disconnect if hostdata->disconnect = DIS_ALWAYS. - * + Tape drive commands should always be allowed to disconnect. - * + Disconnect should be allowed if disconnected_Q isn't empty. - * + Commands should NOT disconnect if input_Q is empty. - * + Disconnect should be allowed if there are commands in input_Q - * for a different target/lun. In this case, the other commands - * should be made disconnect-able, if not already. - * - * I know, I know - this code would flunk me out of any - * "C Programming 101" class ever offered. But it's easy - * to change around and experiment with for now. - */ - - cmd->SCp.phase = 0; /* assume no disconnect */ - if (hostdata->disconnect == DIS_NEVER) - goto no; - if (hostdata->disconnect == DIS_ALWAYS) - goto yes; - if (cmd->device->type == 1) /* tape drive? */ - goto yes; - if (hostdata->disconnected_Q) /* other commands disconnected? */ - goto yes; - if (!(hostdata->input_Q)) /* input_Q empty? */ - goto no; - for (prev = (Scsi_Cmnd *) hostdata->input_Q; prev; prev = (Scsi_Cmnd *) prev->host_scribble) { - if ((prev->device->id != cmd->device->id) || (prev->device->lun != cmd->device->lun)) { - for (prev = (Scsi_Cmnd *) hostdata->input_Q; prev; prev = (Scsi_Cmnd *) prev->host_scribble) - prev->SCp.phase = 1; - goto yes; - } - } - goto no; - - yes: - cmd->SCp.phase = 1; - -#ifdef PROC_STATISTICS - hostdata->disc_allowed_cnt[cmd->device->id]++; -#endif - - no: - write_3393(hostdata, WD_SOURCE_ID, ((cmd->SCp.phase) ? SRCID_ER : 0)); - - write_3393(hostdata, WD_TARGET_LUN, cmd->device->lun); - write_3393(hostdata, WD_SYNCHRONOUS_TRANSFER, hostdata->sync_xfer[cmd->device->id]); - hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun); - - if ((hostdata->level2 <= L2_NONE) || (hostdata->sync_stat[cmd->device->id] == SS_UNSET)) { - - /* - * Do a 'Select-With-ATN' command. This will end with - * one of the following interrupts: - * CSR_RESEL_AM: failure - can try again later. - * CSR_TIMEOUT: failure - give up. - * CSR_SELECT: success - proceed. - */ - - hostdata->selecting = cmd; - -/* Every target has its own synchronous transfer setting, kept in - * the sync_xfer array, and a corresponding status byte in sync_stat[]. - * Each target's sync_stat[] entry is initialized to SS_UNSET, and its - * sync_xfer[] entry is initialized to the default/safe value. SS_UNSET - * means that the parameters are undetermined as yet, and that we - * need to send an SDTR message to this device after selection is - * complete. We set SS_FIRST to tell the interrupt routine to do so, - * unless we don't want to even _try_ synchronous transfers: In this - * case we set SS_SET to make the defaults final. - */ - if (hostdata->sync_stat[cmd->device->id] == SS_UNSET) { - if (hostdata->sync_off & (1 << cmd->device->id)) - hostdata->sync_stat[cmd->device->id] = SS_SET; - else - hostdata->sync_stat[cmd->device->id] = SS_FIRST; - } - hostdata->state = S_SELECTING; - write_3393_count(hostdata, 0); /* this guarantees a DATA_PHASE interrupt */ - write_3393_cmd(hostdata, WD_CMD_SEL_ATN); - } - - else { - - /* - * Do a 'Select-With-ATN-Xfer' command. This will end with - * one of the following interrupts: - * CSR_RESEL_AM: failure - can try again later. - * CSR_TIMEOUT: failure - give up. - * anything else: success - proceed. - */ - - hostdata->connected = cmd; - write_3393(hostdata, WD_COMMAND_PHASE, 0); - - /* copy command_descriptor_block into WD chip - * (take advantage of auto-incrementing) - */ - - write1_io(WD_CDB_1, IO_WD_ADDR); - for (i = 0; i < cmd->cmd_len; i++) - write1_io(cmd->cmnd[i], IO_WD_DATA); - - /* The wd33c93 only knows about Group 0, 1, and 5 commands when - * it's doing a 'select-and-transfer'. To be safe, we write the - * size of the CDB into the OWN_ID register for every case. This - * way there won't be problems with vendor-unique, audio, etc. - */ - - write_3393(hostdata, WD_OWN_ID, cmd->cmd_len); - - /* When doing a non-disconnect command, we can save ourselves a DATA - * phase interrupt later by setting everything up now. With writes we - * need to pre-fill the fifo; if there's room for the 32 flush bytes, - * put them in there too - that'll avoid a fifo interrupt. Reads are - * somewhat simpler. - * KLUDGE NOTE: It seems that you can't completely fill the fifo here: - * This results in the IO_FIFO_COUNT register rolling over to zero, - * and apparently the gate array logic sees this as empty, not full, - * so the 3393 chip is never signalled to start reading from the - * fifo. Or maybe it's seen as a permanent fifo interrupt condition. - * Regardless, we fix this by temporarily pretending that the fifo - * is 16 bytes smaller. (I see now that the old driver has a comment - * about "don't fill completely" in an analogous place - must be the - * same deal.) This results in CDROM, swap partitions, and tape drives - * needing an extra interrupt per write command - I think we can live - * with that! - */ - - if (!(cmd->SCp.phase)) { - write_3393_count(hostdata, cmd->SCp.this_residual); - write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_BUS); - write1_io(0, IO_FIFO_WRITE); /* clear fifo counter, write mode */ - - if (is_dir_out(cmd)) { - hostdata->fifo = FI_FIFO_WRITING; - if ((i = cmd->SCp.this_residual) > (IN2000_FIFO_SIZE - 16)) - i = IN2000_FIFO_SIZE - 16; - cmd->SCp.have_data_in = i; /* this much data in fifo */ - i >>= 1; /* Gulp. Assuming modulo 2. */ - sp = (unsigned short *) cmd->SCp.ptr; - f = hostdata->io_base + IO_FIFO; - -#ifdef FAST_WRITE_IO - - FAST_WRITE2_IO(); -#else - while (i--) - write2_io(*sp++, IO_FIFO); - -#endif - - /* Is there room for the flush bytes? */ - - if (cmd->SCp.have_data_in <= ((IN2000_FIFO_SIZE - 16) - 32)) { - sp = flushbuf; - i = 16; - -#ifdef FAST_WRITE_IO - - FAST_WRITE2_IO(); -#else - while (i--) - write2_io(0, IO_FIFO); - -#endif - - } - } - - else { - write1_io(0, IO_FIFO_READ); /* put fifo in read mode */ - hostdata->fifo = FI_FIFO_READING; - cmd->SCp.have_data_in = 0; /* nothing transferred yet */ - } - - } else { - write_3393_count(hostdata, 0); /* this guarantees a DATA_PHASE interrupt */ - } - hostdata->state = S_RUNNING_LEVEL2; - write_3393_cmd(hostdata, WD_CMD_SEL_ATN_XFER); - } - - /* - * Since the SCSI bus can handle only 1 connection at a time, - * we get out of here now. If the selection fails, or when - * the command disconnects, we'll come back to this routine - * to search the input_Q again... - */ - - DB(DB_EXECUTE, printk("%s)EX-2 ", (cmd->SCp.phase) ? "d:" : "")) - -} - - - -static void transfer_pio(uchar * buf, int cnt, int data_in_dir, struct IN2000_hostdata *hostdata) -{ - uchar asr; - - DB(DB_TRANSFER, printk("(%p,%d,%s)", buf, cnt, data_in_dir ? "in" : "out")) - - write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED); - write_3393_count(hostdata, cnt); - write_3393_cmd(hostdata, WD_CMD_TRANS_INFO); - if (data_in_dir) { - do { - asr = READ_AUX_STAT(); - if (asr & ASR_DBR) - *buf++ = read_3393(hostdata, WD_DATA); - } while (!(asr & ASR_INT)); - } else { - do { - asr = READ_AUX_STAT(); - if (asr & ASR_DBR) - write_3393(hostdata, WD_DATA, *buf++); - } while (!(asr & ASR_INT)); - } - - /* Note: we are returning with the interrupt UN-cleared. - * Since (presumably) an entire I/O operation has - * completed, the bus phase is probably different, and - * the interrupt routine will discover this when it - * responds to the uncleared int. - */ - -} - - - -static void transfer_bytes(Scsi_Cmnd * cmd, int data_in_dir) -{ - struct IN2000_hostdata *hostdata; - unsigned short *sp; - unsigned short f; - int i; - - hostdata = (struct IN2000_hostdata *) cmd->device->host->hostdata; - -/* Normally, you'd expect 'this_residual' to be non-zero here. - * In a series of scatter-gather transfers, however, this - * routine will usually be called with 'this_residual' equal - * to 0 and 'buffers_residual' non-zero. This means that a - * previous transfer completed, clearing 'this_residual', and - * now we need to setup the next scatter-gather buffer as the - * source or destination for THIS transfer. - */ - if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) { - ++cmd->SCp.buffer; - --cmd->SCp.buffers_residual; - cmd->SCp.this_residual = cmd->SCp.buffer->length; - cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); - } - -/* Set up hardware registers */ - - write_3393(hostdata, WD_SYNCHRONOUS_TRANSFER, hostdata->sync_xfer[cmd->device->id]); - write_3393_count(hostdata, cmd->SCp.this_residual); - write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_BUS); - write1_io(0, IO_FIFO_WRITE); /* zero counter, assume write */ - -/* Reading is easy. Just issue the command and return - we'll - * get an interrupt later when we have actual data to worry about. - */ - - if (data_in_dir) { - write1_io(0, IO_FIFO_READ); - if ((hostdata->level2 >= L2_DATA) || (hostdata->level2 == L2_BASIC && cmd->SCp.phase == 0)) { - write_3393(hostdata, WD_COMMAND_PHASE, 0x45); - write_3393_cmd(hostdata, WD_CMD_SEL_ATN_XFER); - hostdata->state = S_RUNNING_LEVEL2; - } else - write_3393_cmd(hostdata, WD_CMD_TRANS_INFO); - hostdata->fifo = FI_FIFO_READING; - cmd->SCp.have_data_in = 0; - return; - } - -/* Writing is more involved - we'll start the WD chip and write as - * much data to the fifo as we can right now. Later interrupts will - * write any bytes that don't make it at this stage. - */ - - if ((hostdata->level2 >= L2_DATA) || (hostdata->level2 == L2_BASIC && cmd->SCp.phase == 0)) { - write_3393(hostdata, WD_COMMAND_PHASE, 0x45); - write_3393_cmd(hostdata, WD_CMD_SEL_ATN_XFER); - hostdata->state = S_RUNNING_LEVEL2; - } else - write_3393_cmd(hostdata, WD_CMD_TRANS_INFO); - hostdata->fifo = FI_FIFO_WRITING; - sp = (unsigned short *) cmd->SCp.ptr; - - if ((i = cmd->SCp.this_residual) > IN2000_FIFO_SIZE) - i = IN2000_FIFO_SIZE; - cmd->SCp.have_data_in = i; - i >>= 1; /* Gulp. We assume this_residual is modulo 2 */ - f = hostdata->io_base + IO_FIFO; - -#ifdef FAST_WRITE_IO - - FAST_WRITE2_IO(); -#else - while (i--) - write2_io(*sp++, IO_FIFO); - -#endif - -} - - -/* We need to use spin_lock_irqsave() & spin_unlock_irqrestore() in this - * function in order to work in an SMP environment. (I'd be surprised - * if the driver is ever used by anyone on a real multi-CPU motherboard, - * but it _does_ need to be able to compile and run in an SMP kernel.) - */ - -static irqreturn_t in2000_intr(int irqnum, void *dev_id) -{ - struct Scsi_Host *instance = dev_id; - struct IN2000_hostdata *hostdata; - Scsi_Cmnd *patch, *cmd; - uchar asr, sr, phs, id, lun, *ucp, msg; - int i, j; - unsigned long length; - unsigned short *sp; - unsigned short f; - unsigned long flags; - - hostdata = (struct IN2000_hostdata *) instance->hostdata; - -/* Get the spin_lock and disable further ints, for SMP */ - - spin_lock_irqsave(instance->host_lock, flags); - -#ifdef PROC_STATISTICS - hostdata->int_cnt++; -#endif - -/* The IN2000 card has 2 interrupt sources OR'ed onto its IRQ line - the - * WD3393 chip and the 2k fifo (which is actually a dual-port RAM combined - * with a big logic array, so it's a little different than what you might - * expect). As far as I know, there's no reason that BOTH can't be active - * at the same time, but there's a problem: while we can read the 3393 - * to tell if _it_ wants an interrupt, I don't know of a way to ask the - * fifo the same question. The best we can do is check the 3393 and if - * it _isn't_ the source of the interrupt, then we can be pretty sure - * that the fifo is the culprit. - * UPDATE: I have it on good authority (Bill Earnest) that bit 0 of the - * IO_FIFO_COUNT register mirrors the fifo interrupt state. I - * assume that bit clear means interrupt active. As it turns - * out, the driver really doesn't need to check for this after - * all, so my remarks above about a 'problem' can safely be - * ignored. The way the logic is set up, there's no advantage - * (that I can see) to worrying about it. - * - * It seems that the fifo interrupt signal is negated when we extract - * bytes during read or write bytes during write. - * - fifo will interrupt when data is moving from it to the 3393, and - * there are 31 (or less?) bytes left to go. This is sort of short- - * sighted: what if you don't WANT to do more? In any case, our - * response is to push more into the fifo - either actual data or - * dummy bytes if need be. Note that we apparently have to write at - * least 32 additional bytes to the fifo after an interrupt in order - * to get it to release the ones it was holding on to - writing fewer - * than 32 will result in another fifo int. - * UPDATE: Again, info from Bill Earnest makes this more understandable: - * 32 bytes = two counts of the fifo counter register. He tells - * me that the fifo interrupt is a non-latching signal derived - * from a straightforward boolean interpretation of the 7 - * highest bits of the fifo counter and the fifo-read/fifo-write - * state. Who'd a thought? - */ - - write1_io(0, IO_LED_ON); - asr = READ_AUX_STAT(); - if (!(asr & ASR_INT)) { /* no WD33c93 interrupt? */ - -/* Ok. This is definitely a FIFO-only interrupt. - * - * If FI_FIFO_READING is set, there are up to 2048 bytes waiting to be read, - * maybe more to come from the SCSI bus. Read as many as we can out of the - * fifo and into memory at the location of SCp.ptr[SCp.have_data_in], and - * update have_data_in afterwards. - * - * If we have FI_FIFO_WRITING, the FIFO has almost run out of bytes to move - * into the WD3393 chip (I think the interrupt happens when there are 31 - * bytes left, but it may be fewer...). The 3393 is still waiting, so we - * shove some more into the fifo, which gets things moving again. If the - * original SCSI command specified more than 2048 bytes, there may still - * be some of that data left: fine - use it (from SCp.ptr[SCp.have_data_in]). - * Don't forget to update have_data_in. If we've already written out the - * entire buffer, feed 32 dummy bytes to the fifo - they're needed to - * push out the remaining real data. - * (Big thanks to Bill Earnest for getting me out of the mud in here.) - */ - - cmd = (Scsi_Cmnd *) hostdata->connected; /* assume we're connected */ - CHECK_NULL(cmd, "fifo_int") - - if (hostdata->fifo == FI_FIFO_READING) { - - DB(DB_FIFO, printk("{R:%02x} ", read1_io(IO_FIFO_COUNT))) - - sp = (unsigned short *) (cmd->SCp.ptr + cmd->SCp.have_data_in); - i = read1_io(IO_FIFO_COUNT) & 0xfe; - i <<= 2; /* # of words waiting in the fifo */ - f = hostdata->io_base + IO_FIFO; - -#ifdef FAST_READ_IO - - FAST_READ2_IO(); -#else - while (i--) - *sp++ = read2_io(IO_FIFO); - -#endif - - i = sp - (unsigned short *) (cmd->SCp.ptr + cmd->SCp.have_data_in); - i <<= 1; - cmd->SCp.have_data_in += i; - } - - else if (hostdata->fifo == FI_FIFO_WRITING) { - - DB(DB_FIFO, printk("{W:%02x} ", read1_io(IO_FIFO_COUNT))) - -/* If all bytes have been written to the fifo, flush out the stragglers. - * Note that while writing 16 dummy words seems arbitrary, we don't - * have another choice that I can see. What we really want is to read - * the 3393 transfer count register (that would tell us how many bytes - * needed flushing), but the TRANSFER_INFO command hasn't completed - * yet (not enough bytes!) and that register won't be accessible. So, - * we use 16 words - a number obtained through trial and error. - * UPDATE: Bill says this is exactly what Always does, so there. - * More thanks due him for help in this section. - */ - if (cmd->SCp.this_residual == cmd->SCp.have_data_in) { - i = 16; - while (i--) /* write 32 dummy bytes */ - write2_io(0, IO_FIFO); - } - -/* If there are still bytes left in the SCSI buffer, write as many as we - * can out to the fifo. - */ - - else { - sp = (unsigned short *) (cmd->SCp.ptr + cmd->SCp.have_data_in); - i = cmd->SCp.this_residual - cmd->SCp.have_data_in; /* bytes yet to go */ - j = read1_io(IO_FIFO_COUNT) & 0xfe; - j <<= 2; /* how many words the fifo has room for */ - if ((j << 1) > i) - j = (i >> 1); - while (j--) - write2_io(*sp++, IO_FIFO); - - i = sp - (unsigned short *) (cmd->SCp.ptr + cmd->SCp.have_data_in); - i <<= 1; - cmd->SCp.have_data_in += i; - } - } - - else { - printk("*** Spurious FIFO interrupt ***"); - } - - write1_io(0, IO_LED_OFF); - -/* release the SMP spin_lock and restore irq state */ - spin_unlock_irqrestore(instance->host_lock, flags); - return IRQ_HANDLED; - } - -/* This interrupt was triggered by the WD33c93 chip. The fifo interrupt - * may also be asserted, but we don't bother to check it: we get more - * detailed info from FIFO_READING and FIFO_WRITING (see below). - */ - - cmd = (Scsi_Cmnd *) hostdata->connected; /* assume we're connected */ - sr = read_3393(hostdata, WD_SCSI_STATUS); /* clear the interrupt */ - phs = read_3393(hostdata, WD_COMMAND_PHASE); - - if (!cmd && (sr != CSR_RESEL_AM && sr != CSR_TIMEOUT && sr != CSR_SELECT)) { - printk("\nNR:wd-intr-1\n"); - write1_io(0, IO_LED_OFF); - -/* release the SMP spin_lock and restore irq state */ - spin_unlock_irqrestore(instance->host_lock, flags); - return IRQ_HANDLED; - } - - DB(DB_INTR, printk("{%02x:%02x-", asr, sr)) - -/* After starting a FIFO-based transfer, the next _WD3393_ interrupt is - * guaranteed to be in response to the completion of the transfer. - * If we were reading, there's probably data in the fifo that needs - * to be copied into RAM - do that here. Also, we have to update - * 'this_residual' and 'ptr' based on the contents of the - * TRANSFER_COUNT register, in case the device decided to do an - * intermediate disconnect (a device may do this if it has to - * do a seek, or just to be nice and let other devices have - * some bus time during long transfers). - * After doing whatever is necessary with the fifo, we go on and - * service the WD3393 interrupt normally. - */ - if (hostdata->fifo == FI_FIFO_READING) { - -/* buffer index = start-of-buffer + #-of-bytes-already-read */ - - sp = (unsigned short *) (cmd->SCp.ptr + cmd->SCp.have_data_in); - -/* bytes remaining in fifo = (total-wanted - #-not-got) - #-already-read */ - - i = (cmd->SCp.this_residual - read_3393_count(hostdata)) - cmd->SCp.have_data_in; - i >>= 1; /* Gulp. We assume this will always be modulo 2 */ - f = hostdata->io_base + IO_FIFO; - -#ifdef FAST_READ_IO - - FAST_READ2_IO(); -#else - while (i--) - *sp++ = read2_io(IO_FIFO); - -#endif - - hostdata->fifo = FI_FIFO_UNUSED; - length = cmd->SCp.this_residual; - cmd->SCp.this_residual = read_3393_count(hostdata); - cmd->SCp.ptr += (length - cmd->SCp.this_residual); - - DB(DB_TRANSFER, printk("(%p,%d)", cmd->SCp.ptr, cmd->SCp.this_residual)) - - } - - else if (hostdata->fifo == FI_FIFO_WRITING) { - hostdata->fifo = FI_FIFO_UNUSED; - length = cmd->SCp.this_residual; - cmd->SCp.this_residual = read_3393_count(hostdata); - cmd->SCp.ptr += (length - cmd->SCp.this_residual); - - DB(DB_TRANSFER, printk("(%p,%d)", cmd->SCp.ptr, cmd->SCp.this_residual)) - - } - -/* Respond to the specific WD3393 interrupt - there are quite a few! */ - - switch (sr) { - - case CSR_TIMEOUT: - DB(DB_INTR, printk("TIMEOUT")) - - if (hostdata->state == S_RUNNING_LEVEL2) - hostdata->connected = NULL; - else { - cmd = (Scsi_Cmnd *) hostdata->selecting; /* get a valid cmd */ - CHECK_NULL(cmd, "csr_timeout") - hostdata->selecting = NULL; - } - - cmd->result = DID_NO_CONNECT << 16; - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); - hostdata->state = S_UNCONNECTED; - cmd->scsi_done(cmd); - -/* We are not connected to a target - check to see if there - * are commands waiting to be executed. - */ - - in2000_execute(instance); - break; - - -/* Note: this interrupt should not occur in a LEVEL2 command */ - - case CSR_SELECT: - DB(DB_INTR, printk("SELECT")) - hostdata->connected = cmd = (Scsi_Cmnd *) hostdata->selecting; - CHECK_NULL(cmd, "csr_select") - hostdata->selecting = NULL; - - /* construct an IDENTIFY message with correct disconnect bit */ - - hostdata->outgoing_msg[0] = (0x80 | 0x00 | cmd->device->lun); - if (cmd->SCp.phase) - hostdata->outgoing_msg[0] |= 0x40; - - if (hostdata->sync_stat[cmd->device->id] == SS_FIRST) { -#ifdef SYNC_DEBUG - printk(" sending SDTR "); -#endif - - hostdata->sync_stat[cmd->device->id] = SS_WAITING; - - /* tack on a 2nd message to ask about synchronous transfers */ - - hostdata->outgoing_msg[1] = EXTENDED_MESSAGE; - hostdata->outgoing_msg[2] = 3; - hostdata->outgoing_msg[3] = EXTENDED_SDTR; - hostdata->outgoing_msg[4] = OPTIMUM_SX_PER / 4; - hostdata->outgoing_msg[5] = OPTIMUM_SX_OFF; - hostdata->outgoing_len = 6; - } else - hostdata->outgoing_len = 1; - - hostdata->state = S_CONNECTED; - break; - - - case CSR_XFER_DONE | PHS_DATA_IN: - case CSR_UNEXP | PHS_DATA_IN: - case CSR_SRV_REQ | PHS_DATA_IN: - DB(DB_INTR, printk("IN-%d.%d", cmd->SCp.this_residual, cmd->SCp.buffers_residual)) - transfer_bytes(cmd, DATA_IN_DIR); - if (hostdata->state != S_RUNNING_LEVEL2) - hostdata->state = S_CONNECTED; - break; - - - case CSR_XFER_DONE | PHS_DATA_OUT: - case CSR_UNEXP | PHS_DATA_OUT: - case CSR_SRV_REQ | PHS_DATA_OUT: - DB(DB_INTR, printk("OUT-%d.%d", cmd->SCp.this_residual, cmd->SCp.buffers_residual)) - transfer_bytes(cmd, DATA_OUT_DIR); - if (hostdata->state != S_RUNNING_LEVEL2) - hostdata->state = S_CONNECTED; - break; - - -/* Note: this interrupt should not occur in a LEVEL2 command */ - - case CSR_XFER_DONE | PHS_COMMAND: - case CSR_UNEXP | PHS_COMMAND: - case CSR_SRV_REQ | PHS_COMMAND: - DB(DB_INTR, printk("CMND-%02x", cmd->cmnd[0])) - transfer_pio(cmd->cmnd, cmd->cmd_len, DATA_OUT_DIR, hostdata); - hostdata->state = S_CONNECTED; - break; - - - case CSR_XFER_DONE | PHS_STATUS: - case CSR_UNEXP | PHS_STATUS: - case CSR_SRV_REQ | PHS_STATUS: - DB(DB_INTR, printk("STATUS=")) - - cmd->SCp.Status = read_1_byte(hostdata); - DB(DB_INTR, printk("%02x", cmd->SCp.Status)) - if (hostdata->level2 >= L2_BASIC) { - sr = read_3393(hostdata, WD_SCSI_STATUS); /* clear interrupt */ - hostdata->state = S_RUNNING_LEVEL2; - write_3393(hostdata, WD_COMMAND_PHASE, 0x50); - write_3393_cmd(hostdata, WD_CMD_SEL_ATN_XFER); - } else { - hostdata->state = S_CONNECTED; - } - break; - - - case CSR_XFER_DONE | PHS_MESS_IN: - case CSR_UNEXP | PHS_MESS_IN: - case CSR_SRV_REQ | PHS_MESS_IN: - DB(DB_INTR, printk("MSG_IN=")) - - msg = read_1_byte(hostdata); - sr = read_3393(hostdata, WD_SCSI_STATUS); /* clear interrupt */ - - hostdata->incoming_msg[hostdata->incoming_ptr] = msg; - if (hostdata->incoming_msg[0] == EXTENDED_MESSAGE) - msg = EXTENDED_MESSAGE; - else - hostdata->incoming_ptr = 0; - - cmd->SCp.Message = msg; - switch (msg) { - - case COMMAND_COMPLETE: - DB(DB_INTR, printk("CCMP")) - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - hostdata->state = S_PRE_CMP_DISC; - break; - - case SAVE_POINTERS: - DB(DB_INTR, printk("SDP")) - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - hostdata->state = S_CONNECTED; - break; - - case RESTORE_POINTERS: - DB(DB_INTR, printk("RDP")) - if (hostdata->level2 >= L2_BASIC) { - write_3393(hostdata, WD_COMMAND_PHASE, 0x45); - write_3393_cmd(hostdata, WD_CMD_SEL_ATN_XFER); - hostdata->state = S_RUNNING_LEVEL2; - } else { - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - hostdata->state = S_CONNECTED; - } - break; - - case DISCONNECT: - DB(DB_INTR, printk("DIS")) - cmd->device->disconnect = 1; - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - hostdata->state = S_PRE_TMP_DISC; - break; - - case MESSAGE_REJECT: - DB(DB_INTR, printk("REJ")) -#ifdef SYNC_DEBUG - printk("-REJ-"); -#endif - if (hostdata->sync_stat[cmd->device->id] == SS_WAITING) - hostdata->sync_stat[cmd->device->id] = SS_SET; - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - hostdata->state = S_CONNECTED; - break; - - case EXTENDED_MESSAGE: - DB(DB_INTR, printk("EXT")) - - ucp = hostdata->incoming_msg; - -#ifdef SYNC_DEBUG - printk("%02x", ucp[hostdata->incoming_ptr]); -#endif - /* Is this the last byte of the extended message? */ - - if ((hostdata->incoming_ptr >= 2) && (hostdata->incoming_ptr == (ucp[1] + 1))) { - - switch (ucp[2]) { /* what's the EXTENDED code? */ - case EXTENDED_SDTR: - id = calc_sync_xfer(ucp[3], ucp[4]); - if (hostdata->sync_stat[cmd->device->id] != SS_WAITING) { - -/* A device has sent an unsolicited SDTR message; rather than go - * through the effort of decoding it and then figuring out what - * our reply should be, we're just gonna say that we have a - * synchronous fifo depth of 0. This will result in asynchronous - * transfers - not ideal but so much easier. - * Actually, this is OK because it assures us that if we don't - * specifically ask for sync transfers, we won't do any. - */ - - write_3393_cmd(hostdata, WD_CMD_ASSERT_ATN); /* want MESS_OUT */ - hostdata->outgoing_msg[0] = EXTENDED_MESSAGE; - hostdata->outgoing_msg[1] = 3; - hostdata->outgoing_msg[2] = EXTENDED_SDTR; - hostdata->outgoing_msg[3] = hostdata->default_sx_per / 4; - hostdata->outgoing_msg[4] = 0; - hostdata->outgoing_len = 5; - hostdata->sync_xfer[cmd->device->id] = calc_sync_xfer(hostdata->default_sx_per / 4, 0); - } else { - hostdata->sync_xfer[cmd->device->id] = id; - } -#ifdef SYNC_DEBUG - printk("sync_xfer=%02x", hostdata->sync_xfer[cmd->device->id]); -#endif - hostdata->sync_stat[cmd->device->id] = SS_SET; - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - hostdata->state = S_CONNECTED; - break; - case EXTENDED_WDTR: - write_3393_cmd(hostdata, WD_CMD_ASSERT_ATN); /* want MESS_OUT */ - printk("sending WDTR "); - hostdata->outgoing_msg[0] = EXTENDED_MESSAGE; - hostdata->outgoing_msg[1] = 2; - hostdata->outgoing_msg[2] = EXTENDED_WDTR; - hostdata->outgoing_msg[3] = 0; /* 8 bit transfer width */ - hostdata->outgoing_len = 4; - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - hostdata->state = S_CONNECTED; - break; - default: - write_3393_cmd(hostdata, WD_CMD_ASSERT_ATN); /* want MESS_OUT */ - printk("Rejecting Unknown Extended Message(%02x). ", ucp[2]); - hostdata->outgoing_msg[0] = MESSAGE_REJECT; - hostdata->outgoing_len = 1; - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - hostdata->state = S_CONNECTED; - break; - } - hostdata->incoming_ptr = 0; - } - - /* We need to read more MESS_IN bytes for the extended message */ - - else { - hostdata->incoming_ptr++; - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - hostdata->state = S_CONNECTED; - } - break; - - default: - printk("Rejecting Unknown Message(%02x) ", msg); - write_3393_cmd(hostdata, WD_CMD_ASSERT_ATN); /* want MESS_OUT */ - hostdata->outgoing_msg[0] = MESSAGE_REJECT; - hostdata->outgoing_len = 1; - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - hostdata->state = S_CONNECTED; - } - break; - - -/* Note: this interrupt will occur only after a LEVEL2 command */ - - case CSR_SEL_XFER_DONE: - -/* Make sure that reselection is enabled at this point - it may - * have been turned off for the command that just completed. - */ - - write_3393(hostdata, WD_SOURCE_ID, SRCID_ER); - if (phs == 0x60) { - DB(DB_INTR, printk("SX-DONE")) - cmd->SCp.Message = COMMAND_COMPLETE; - lun = read_3393(hostdata, WD_TARGET_LUN); - DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun)) - hostdata->connected = NULL; - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); - hostdata->state = S_UNCONNECTED; - if (cmd->SCp.Status == ILLEGAL_STATUS_BYTE) - cmd->SCp.Status = lun; - if (cmd->cmnd[0] == REQUEST_SENSE && cmd->SCp.Status != GOOD) - cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16); - else - cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); - cmd->scsi_done(cmd); - -/* We are no longer connected to a target - check to see if - * there are commands waiting to be executed. - */ - - in2000_execute(instance); - } else { - printk("%02x:%02x:%02x: Unknown SEL_XFER_DONE phase!!---", asr, sr, phs); - } - break; - - -/* Note: this interrupt will occur only after a LEVEL2 command */ - - case CSR_SDP: - DB(DB_INTR, printk("SDP")) - hostdata->state = S_RUNNING_LEVEL2; - write_3393(hostdata, WD_COMMAND_PHASE, 0x41); - write_3393_cmd(hostdata, WD_CMD_SEL_ATN_XFER); - break; - - - case CSR_XFER_DONE | PHS_MESS_OUT: - case CSR_UNEXP | PHS_MESS_OUT: - case CSR_SRV_REQ | PHS_MESS_OUT: - DB(DB_INTR, printk("MSG_OUT=")) - -/* To get here, we've probably requested MESSAGE_OUT and have - * already put the correct bytes in outgoing_msg[] and filled - * in outgoing_len. We simply send them out to the SCSI bus. - * Sometimes we get MESSAGE_OUT phase when we're not expecting - * it - like when our SDTR message is rejected by a target. Some - * targets send the REJECT before receiving all of the extended - * message, and then seem to go back to MESSAGE_OUT for a byte - * or two. Not sure why, or if I'm doing something wrong to - * cause this to happen. Regardless, it seems that sending - * NOP messages in these situations results in no harm and - * makes everyone happy. - */ - if (hostdata->outgoing_len == 0) { - hostdata->outgoing_len = 1; - hostdata->outgoing_msg[0] = NOP; - } - transfer_pio(hostdata->outgoing_msg, hostdata->outgoing_len, DATA_OUT_DIR, hostdata); - DB(DB_INTR, printk("%02x", hostdata->outgoing_msg[0])) - hostdata->outgoing_len = 0; - hostdata->state = S_CONNECTED; - break; - - - case CSR_UNEXP_DISC: - -/* I think I've seen this after a request-sense that was in response - * to an error condition, but not sure. We certainly need to do - * something when we get this interrupt - the question is 'what?'. - * Let's think positively, and assume some command has finished - * in a legal manner (like a command that provokes a request-sense), - * so we treat it as a normal command-complete-disconnect. - */ - - -/* Make sure that reselection is enabled at this point - it may - * have been turned off for the command that just completed. - */ - - write_3393(hostdata, WD_SOURCE_ID, SRCID_ER); - if (cmd == NULL) { - printk(" - Already disconnected! "); - hostdata->state = S_UNCONNECTED; - -/* release the SMP spin_lock and restore irq state */ - spin_unlock_irqrestore(instance->host_lock, flags); - return IRQ_HANDLED; - } - DB(DB_INTR, printk("UNEXP_DISC")) - hostdata->connected = NULL; - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); - hostdata->state = S_UNCONNECTED; - if (cmd->cmnd[0] == REQUEST_SENSE && cmd->SCp.Status != GOOD) - cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16); - else - cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); - cmd->scsi_done(cmd); - -/* We are no longer connected to a target - check to see if - * there are commands waiting to be executed. - */ - - in2000_execute(instance); - break; - - - case CSR_DISC: - -/* Make sure that reselection is enabled at this point - it may - * have been turned off for the command that just completed. - */ - - write_3393(hostdata, WD_SOURCE_ID, SRCID_ER); - DB(DB_INTR, printk("DISC")) - if (cmd == NULL) { - printk(" - Already disconnected! "); - hostdata->state = S_UNCONNECTED; - } - switch (hostdata->state) { - case S_PRE_CMP_DISC: - hostdata->connected = NULL; - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); - hostdata->state = S_UNCONNECTED; - DB(DB_INTR, printk(":%d", cmd->SCp.Status)) - if (cmd->cmnd[0] == REQUEST_SENSE && cmd->SCp.Status != GOOD) - cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16); - else - cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); - cmd->scsi_done(cmd); - break; - case S_PRE_TMP_DISC: - case S_RUNNING_LEVEL2: - cmd->host_scribble = (uchar *) hostdata->disconnected_Q; - hostdata->disconnected_Q = cmd; - hostdata->connected = NULL; - hostdata->state = S_UNCONNECTED; - -#ifdef PROC_STATISTICS - hostdata->disc_done_cnt[cmd->device->id]++; -#endif - - break; - default: - printk("*** Unexpected DISCONNECT interrupt! ***"); - hostdata->state = S_UNCONNECTED; - } - -/* We are no longer connected to a target - check to see if - * there are commands waiting to be executed. - */ - - in2000_execute(instance); - break; - - - case CSR_RESEL_AM: - DB(DB_INTR, printk("RESEL")) - - /* First we have to make sure this reselection didn't */ - /* happen during Arbitration/Selection of some other device. */ - /* If yes, put losing command back on top of input_Q. */ - if (hostdata->level2 <= L2_NONE) { - - if (hostdata->selecting) { - cmd = (Scsi_Cmnd *) hostdata->selecting; - hostdata->selecting = NULL; - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); - cmd->host_scribble = (uchar *) hostdata->input_Q; - hostdata->input_Q = cmd; - } - } - - else { - - if (cmd) { - if (phs == 0x00) { - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); - cmd->host_scribble = (uchar *) hostdata->input_Q; - hostdata->input_Q = cmd; - } else { - printk("---%02x:%02x:%02x-TROUBLE: Intrusive ReSelect!---", asr, sr, phs); - while (1) - printk("\r"); - } - } - - } - - /* OK - find out which device reselected us. */ - - id = read_3393(hostdata, WD_SOURCE_ID); - id &= SRCID_MASK; - - /* and extract the lun from the ID message. (Note that we don't - * bother to check for a valid message here - I guess this is - * not the right way to go, but....) - */ - - lun = read_3393(hostdata, WD_DATA); - if (hostdata->level2 < L2_RESELECT) - write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK); - lun &= 7; - - /* Now we look for the command that's reconnecting. */ - - cmd = (Scsi_Cmnd *) hostdata->disconnected_Q; - patch = NULL; - while (cmd) { - if (id == cmd->device->id && lun == cmd->device->lun) - break; - patch = cmd; - cmd = (Scsi_Cmnd *) cmd->host_scribble; - } - - /* Hmm. Couldn't find a valid command.... What to do? */ - - if (!cmd) { - printk("---TROUBLE: target %d.%d not in disconnect queue---", id, lun); - break; - } - - /* Ok, found the command - now start it up again. */ - - if (patch) - patch->host_scribble = cmd->host_scribble; - else - hostdata->disconnected_Q = (Scsi_Cmnd *) cmd->host_scribble; - hostdata->connected = cmd; - - /* We don't need to worry about 'initialize_SCp()' or 'hostdata->busy[]' - * because these things are preserved over a disconnect. - * But we DO need to fix the DPD bit so it's correct for this command. - */ - - if (is_dir_out(cmd)) - write_3393(hostdata, WD_DESTINATION_ID, cmd->device->id); - else - write_3393(hostdata, WD_DESTINATION_ID, cmd->device->id | DSTID_DPD); - if (hostdata->level2 >= L2_RESELECT) { - write_3393_count(hostdata, 0); /* we want a DATA_PHASE interrupt */ - write_3393(hostdata, WD_COMMAND_PHASE, 0x45); - write_3393_cmd(hostdata, WD_CMD_SEL_ATN_XFER); - hostdata->state = S_RUNNING_LEVEL2; - } else - hostdata->state = S_CONNECTED; - - break; - - default: - printk("--UNKNOWN INTERRUPT:%02x:%02x:%02x--", asr, sr, phs); - } - - write1_io(0, IO_LED_OFF); - - DB(DB_INTR, printk("} ")) - -/* release the SMP spin_lock and restore irq state */ - spin_unlock_irqrestore(instance->host_lock, flags); - return IRQ_HANDLED; -} - - - -#define RESET_CARD 0 -#define RESET_CARD_AND_BUS 1 -#define B_FLAG 0x80 - -/* - * Caller must hold instance lock! - */ - -static int reset_hardware(struct Scsi_Host *instance, int type) -{ - struct IN2000_hostdata *hostdata; - int qt, x; - - hostdata = (struct IN2000_hostdata *) instance->hostdata; - - write1_io(0, IO_LED_ON); - if (type == RESET_CARD_AND_BUS) { - write1_io(0, IO_CARD_RESET); - x = read1_io(IO_HARDWARE); - } - x = read_3393(hostdata, WD_SCSI_STATUS); /* clear any WD intrpt */ - write_3393(hostdata, WD_OWN_ID, instance->this_id | OWNID_EAF | OWNID_RAF | OWNID_FS_8); - write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED); - write_3393(hostdata, WD_SYNCHRONOUS_TRANSFER, calc_sync_xfer(hostdata->default_sx_per / 4, DEFAULT_SX_OFF)); - - write1_io(0, IO_FIFO_WRITE); /* clear fifo counter */ - write1_io(0, IO_FIFO_READ); /* start fifo out in read mode */ - write_3393(hostdata, WD_COMMAND, WD_CMD_RESET); - /* FIXME: timeout ?? */ - while (!(READ_AUX_STAT() & ASR_INT)) - cpu_relax(); /* wait for RESET to complete */ - - x = read_3393(hostdata, WD_SCSI_STATUS); /* clear interrupt */ - - write_3393(hostdata, WD_QUEUE_TAG, 0xa5); /* any random number */ - qt = read_3393(hostdata, WD_QUEUE_TAG); - if (qt == 0xa5) { - x |= B_FLAG; - write_3393(hostdata, WD_QUEUE_TAG, 0); - } - write_3393(hostdata, WD_TIMEOUT_PERIOD, TIMEOUT_PERIOD_VALUE); - write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED); - write1_io(0, IO_LED_OFF); - return x; -} - - - -static int in2000_bus_reset(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *instance; - struct IN2000_hostdata *hostdata; - int x; - unsigned long flags; - - instance = cmd->device->host; - hostdata = (struct IN2000_hostdata *) instance->hostdata; - - printk(KERN_WARNING "scsi%d: Reset. ", instance->host_no); - - spin_lock_irqsave(instance->host_lock, flags); - - /* do scsi-reset here */ - reset_hardware(instance, RESET_CARD_AND_BUS); - for (x = 0; x < 8; x++) { - hostdata->busy[x] = 0; - hostdata->sync_xfer[x] = calc_sync_xfer(DEFAULT_SX_PER / 4, DEFAULT_SX_OFF); - hostdata->sync_stat[x] = SS_UNSET; /* using default sync values */ - } - hostdata->input_Q = NULL; - hostdata->selecting = NULL; - hostdata->connected = NULL; - hostdata->disconnected_Q = NULL; - hostdata->state = S_UNCONNECTED; - hostdata->fifo = FI_FIFO_UNUSED; - hostdata->incoming_ptr = 0; - hostdata->outgoing_len = 0; - - cmd->result = DID_RESET << 16; - - spin_unlock_irqrestore(instance->host_lock, flags); - return SUCCESS; -} - -static int __in2000_abort(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *instance; - struct IN2000_hostdata *hostdata; - Scsi_Cmnd *tmp, *prev; - uchar sr, asr; - unsigned long timeout; - - instance = cmd->device->host; - hostdata = (struct IN2000_hostdata *) instance->hostdata; - - printk(KERN_DEBUG "scsi%d: Abort-", instance->host_no); - printk("(asr=%02x,count=%ld,resid=%d,buf_resid=%d,have_data=%d,FC=%02x)- ", READ_AUX_STAT(), read_3393_count(hostdata), cmd->SCp.this_residual, cmd->SCp.buffers_residual, cmd->SCp.have_data_in, read1_io(IO_FIFO_COUNT)); - -/* - * Case 1 : If the command hasn't been issued yet, we simply remove it - * from the inout_Q. - */ - - tmp = (Scsi_Cmnd *) hostdata->input_Q; - prev = NULL; - while (tmp) { - if (tmp == cmd) { - if (prev) - prev->host_scribble = cmd->host_scribble; - cmd->host_scribble = NULL; - cmd->result = DID_ABORT << 16; - printk(KERN_WARNING "scsi%d: Abort - removing command from input_Q. ", instance->host_no); - cmd->scsi_done(cmd); - return SUCCESS; - } - prev = tmp; - tmp = (Scsi_Cmnd *) tmp->host_scribble; - } - -/* - * Case 2 : If the command is connected, we're going to fail the abort - * and let the high level SCSI driver retry at a later time or - * issue a reset. - * - * Timeouts, and therefore aborted commands, will be highly unlikely - * and handling them cleanly in this situation would make the common - * case of noresets less efficient, and would pollute our code. So, - * we fail. - */ - - if (hostdata->connected == cmd) { - - printk(KERN_WARNING "scsi%d: Aborting connected command - ", instance->host_no); - - printk("sending wd33c93 ABORT command - "); - write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED); - write_3393_cmd(hostdata, WD_CMD_ABORT); - -/* Now we have to attempt to flush out the FIFO... */ - - printk("flushing fifo - "); - timeout = 1000000; - do { - asr = READ_AUX_STAT(); - if (asr & ASR_DBR) - read_3393(hostdata, WD_DATA); - } while (!(asr & ASR_INT) && timeout-- > 0); - sr = read_3393(hostdata, WD_SCSI_STATUS); - printk("asr=%02x, sr=%02x, %ld bytes un-transferred (timeout=%ld) - ", asr, sr, read_3393_count(hostdata), timeout); - - /* - * Abort command processed. - * Still connected. - * We must disconnect. - */ - - printk("sending wd33c93 DISCONNECT command - "); - write_3393_cmd(hostdata, WD_CMD_DISCONNECT); - - timeout = 1000000; - asr = READ_AUX_STAT(); - while ((asr & ASR_CIP) && timeout-- > 0) - asr = READ_AUX_STAT(); - sr = read_3393(hostdata, WD_SCSI_STATUS); - printk("asr=%02x, sr=%02x.", asr, sr); - - hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); - hostdata->connected = NULL; - hostdata->state = S_UNCONNECTED; - cmd->result = DID_ABORT << 16; - cmd->scsi_done(cmd); - - in2000_execute(instance); - - return SUCCESS; - } - -/* - * Case 3: If the command is currently disconnected from the bus, - * we're not going to expend much effort here: Let's just return - * an ABORT_SNOOZE and hope for the best... - */ - - for (tmp = (Scsi_Cmnd *) hostdata->disconnected_Q; tmp; tmp = (Scsi_Cmnd *) tmp->host_scribble) - if (cmd == tmp) { - printk(KERN_DEBUG "scsi%d: unable to abort disconnected command.\n", instance->host_no); - return FAILED; - } - -/* - * Case 4 : If we reached this point, the command was not found in any of - * the queues. - * - * We probably reached this point because of an unlikely race condition - * between the command completing successfully and the abortion code, - * so we won't panic, but we will notify the user in case something really - * broke. - */ - - in2000_execute(instance); - - printk("scsi%d: warning : SCSI command probably completed successfully" " before abortion. ", instance->host_no); - return SUCCESS; -} - -static int in2000_abort(Scsi_Cmnd * cmd) -{ - int rc; - - spin_lock_irq(cmd->device->host->host_lock); - rc = __in2000_abort(cmd); - spin_unlock_irq(cmd->device->host->host_lock); - - return rc; -} - - -#define MAX_IN2000_HOSTS 3 -#define MAX_SETUP_ARGS ARRAY_SIZE(setup_args) -#define SETUP_BUFFER_SIZE 200 -static char setup_buffer[SETUP_BUFFER_SIZE]; -static char setup_used[MAX_SETUP_ARGS]; -static int done_setup = 0; - -static void __init in2000_setup(char *str, int *ints) -{ - int i; - char *p1, *p2; - - strlcpy(setup_buffer, str, SETUP_BUFFER_SIZE); - p1 = setup_buffer; - i = 0; - while (*p1 && (i < MAX_SETUP_ARGS)) { - p2 = strchr(p1, ','); - if (p2) { - *p2 = '\0'; - if (p1 != p2) - setup_args[i] = p1; - p1 = p2 + 1; - i++; - } else { - setup_args[i] = p1; - break; - } - } - for (i = 0; i < MAX_SETUP_ARGS; i++) - setup_used[i] = 0; - done_setup = 1; -} - - -/* check_setup_args() returns index if key found, 0 if not - */ - -static int __init check_setup_args(char *key, int *val, char *buf) -{ - int x; - char *cp; - - for (x = 0; x < MAX_SETUP_ARGS; x++) { - if (setup_used[x]) - continue; - if (!strncmp(setup_args[x], key, strlen(key))) - break; - } - if (x == MAX_SETUP_ARGS) - return 0; - setup_used[x] = 1; - cp = setup_args[x] + strlen(key); - *val = -1; - if (*cp != ':') - return ++x; - cp++; - if ((*cp >= '0') && (*cp <= '9')) { - *val = simple_strtoul(cp, NULL, 0); - } - return ++x; -} - - - -/* The "correct" (ie portable) way to access memory-mapped hardware - * such as the IN2000 EPROM and dip switch is through the use of - * special macros declared in 'asm/io.h'. We use readb() and readl() - * when reading from the card's BIOS area in in2000_detect(). - */ -static u32 bios_tab[] in2000__INITDATA = { - 0xc8000, - 0xd0000, - 0xd8000, - 0 -}; - -static unsigned short base_tab[] in2000__INITDATA = { - 0x220, - 0x200, - 0x110, - 0x100, -}; - -static int int_tab[] in2000__INITDATA = { - 15, - 14, - 11, - 10 -}; - -static int probe_bios(u32 addr, u32 *s1, uchar *switches) -{ - void __iomem *p = ioremap(addr, 0x34); - if (!p) - return 0; - *s1 = readl(p + 0x10); - if (*s1 == 0x41564f4e || readl(p + 0x30) == 0x61776c41) { - /* Read the switch image that's mapped into EPROM space */ - *switches = ~readb(p + 0x20); - iounmap(p); - return 1; - } - iounmap(p); - return 0; -} - -static int __init in2000_detect(struct scsi_host_template * tpnt) -{ - struct Scsi_Host *instance; - struct IN2000_hostdata *hostdata; - int detect_count; - int bios; - int x; - unsigned short base; - uchar switches; - uchar hrev; - unsigned long flags; - int val; - char buf[32]; - -/* Thanks to help from Bill Earnest, probing for IN2000 cards is a - * pretty straightforward and fool-proof operation. There are 3 - * possible locations for the IN2000 EPROM in memory space - if we - * find a BIOS signature, we can read the dip switch settings from - * the byte at BIOS+32 (shadowed in by logic on the card). From 2 - * of the switch bits we get the card's address in IO space. There's - * an image of the dip switch there, also, so we have a way to back- - * check that this really is an IN2000 card. Very nifty. Use the - * 'ioport:xx' command-line parameter if your BIOS EPROM is absent - * or disabled. - */ - - if (!done_setup && setup_strings) - in2000_setup(setup_strings, NULL); - - detect_count = 0; - for (bios = 0; bios_tab[bios]; bios++) { - u32 s1 = 0; - if (check_setup_args("ioport", &val, buf)) { - base = val; - switches = ~inb(base + IO_SWITCHES) & 0xff; - printk("Forcing IN2000 detection at IOport 0x%x ", base); - bios = 2; - } -/* - * There have been a couple of BIOS versions with different layouts - * for the obvious ID strings. We look for the 2 most common ones and - * hope that they cover all the cases... - */ - else if (probe_bios(bios_tab[bios], &s1, &switches)) { - printk("Found IN2000 BIOS at 0x%x ", (unsigned int) bios_tab[bios]); - -/* Find out where the IO space is */ - - x = switches & (SW_ADDR0 | SW_ADDR1); - base = base_tab[x]; - -/* Check for the IN2000 signature in IO space. */ - - x = ~inb(base + IO_SWITCHES) & 0xff; - if (x != switches) { - printk("Bad IO signature: %02x vs %02x.\n", x, switches); - continue; - } - } else - continue; - -/* OK. We have a base address for the IO ports - run a few safety checks */ - - if (!(switches & SW_BIT7)) { /* I _think_ all cards do this */ - printk("There is no IN-2000 SCSI card at IOport 0x%03x!\n", base); - continue; - } - -/* Let's assume any hardware version will work, although the driver - * has only been tested on 0x21, 0x22, 0x25, 0x26, and 0x27. We'll - * print out the rev number for reference later, but accept them all. - */ - - hrev = inb(base + IO_HARDWARE); - - /* Bit 2 tells us if interrupts are disabled */ - if (switches & SW_DISINT) { - printk("The IN-2000 SCSI card at IOport 0x%03x ", base); - printk("is not configured for interrupt operation!\n"); - printk("This driver requires an interrupt: cancelling detection.\n"); - continue; - } - -/* Ok. We accept that there's an IN2000 at ioaddr 'base'. Now - * initialize it. - */ - - tpnt->proc_name = "in2000"; - instance = scsi_register(tpnt, sizeof(struct IN2000_hostdata)); - if (instance == NULL) - continue; - detect_count++; - hostdata = (struct IN2000_hostdata *) instance->hostdata; - instance->io_port = hostdata->io_base = base; - hostdata->dip_switch = switches; - hostdata->hrev = hrev; - - write1_io(0, IO_FIFO_WRITE); /* clear fifo counter */ - write1_io(0, IO_FIFO_READ); /* start fifo out in read mode */ - write1_io(0, IO_INTR_MASK); /* allow all ints */ - x = int_tab[(switches & (SW_INT0 | SW_INT1)) >> SW_INT_SHIFT]; - if (request_irq(x, in2000_intr, 0, "in2000", instance)) { - printk("in2000_detect: Unable to allocate IRQ.\n"); - detect_count--; - continue; - } - instance->irq = x; - instance->n_io_port = 13; - request_region(base, 13, "in2000"); /* lock in this IO space for our use */ - - for (x = 0; x < 8; x++) { - hostdata->busy[x] = 0; - hostdata->sync_xfer[x] = calc_sync_xfer(DEFAULT_SX_PER / 4, DEFAULT_SX_OFF); - hostdata->sync_stat[x] = SS_UNSET; /* using default sync values */ -#ifdef PROC_STATISTICS - hostdata->cmd_cnt[x] = 0; - hostdata->disc_allowed_cnt[x] = 0; - hostdata->disc_done_cnt[x] = 0; -#endif - } - hostdata->input_Q = NULL; - hostdata->selecting = NULL; - hostdata->connected = NULL; - hostdata->disconnected_Q = NULL; - hostdata->state = S_UNCONNECTED; - hostdata->fifo = FI_FIFO_UNUSED; - hostdata->level2 = L2_BASIC; - hostdata->disconnect = DIS_ADAPTIVE; - hostdata->args = DEBUG_DEFAULTS; - hostdata->incoming_ptr = 0; - hostdata->outgoing_len = 0; - hostdata->default_sx_per = DEFAULT_SX_PER; - -/* Older BIOS's had a 'sync on/off' switch - use its setting */ - - if (s1 == 0x41564f4e && (switches & SW_SYNC_DOS5)) - hostdata->sync_off = 0x00; /* sync defaults to on */ - else - hostdata->sync_off = 0xff; /* sync defaults to off */ - -#ifdef PROC_INTERFACE - hostdata->proc = PR_VERSION | PR_INFO | PR_STATISTICS | PR_CONNECTED | PR_INPUTQ | PR_DISCQ | PR_STOP; -#ifdef PROC_STATISTICS - hostdata->int_cnt = 0; -#endif -#endif - - if (check_setup_args("nosync", &val, buf)) - hostdata->sync_off = val; - - if (check_setup_args("period", &val, buf)) - hostdata->default_sx_per = sx_table[round_period((unsigned int) val)].period_ns; - - if (check_setup_args("disconnect", &val, buf)) { - if ((val >= DIS_NEVER) && (val <= DIS_ALWAYS)) - hostdata->disconnect = val; - else - hostdata->disconnect = DIS_ADAPTIVE; - } - - if (check_setup_args("noreset", &val, buf)) - hostdata->args ^= A_NO_SCSI_RESET; - - if (check_setup_args("level2", &val, buf)) - hostdata->level2 = val; - - if (check_setup_args("debug", &val, buf)) - hostdata->args = (val & DB_MASK); - -#ifdef PROC_INTERFACE - if (check_setup_args("proc", &val, buf)) - hostdata->proc = val; -#endif - - - /* FIXME: not strictly needed I think but the called code expects - to be locked */ - spin_lock_irqsave(instance->host_lock, flags); - x = reset_hardware(instance, (hostdata->args & A_NO_SCSI_RESET) ? RESET_CARD : RESET_CARD_AND_BUS); - spin_unlock_irqrestore(instance->host_lock, flags); - - hostdata->microcode = read_3393(hostdata, WD_CDB_1); - if (x & 0x01) { - if (x & B_FLAG) - hostdata->chip = C_WD33C93B; - else - hostdata->chip = C_WD33C93A; - } else - hostdata->chip = C_WD33C93; - - printk("dip_switch=%02x irq=%d ioport=%02x floppy=%s sync/DOS5=%s ", (switches & 0x7f), instance->irq, hostdata->io_base, (switches & SW_FLOPPY) ? "Yes" : "No", (switches & SW_SYNC_DOS5) ? "Yes" : "No"); - printk("hardware_ver=%02x chip=%s microcode=%02x\n", hrev, (hostdata->chip == C_WD33C93) ? "WD33c93" : (hostdata->chip == C_WD33C93A) ? "WD33c93A" : (hostdata->chip == C_WD33C93B) ? "WD33c93B" : "unknown", hostdata->microcode); -#ifdef DEBUGGING_ON - printk("setup_args = "); - for (x = 0; x < MAX_SETUP_ARGS; x++) - printk("%s,", setup_args[x]); - printk("\n"); -#endif - if (hostdata->sync_off == 0xff) - printk("Sync-transfer DISABLED on all devices: ENABLE from command-line\n"); - printk("IN2000 driver version %s - %s\n", IN2000_VERSION, IN2000_DATE); - } - - return detect_count; -} - -static int in2000_release(struct Scsi_Host *shost) -{ - if (shost->irq) - free_irq(shost->irq, shost); - if (shost->io_port && shost->n_io_port) - release_region(shost->io_port, shost->n_io_port); - return 0; -} - -/* NOTE: I lifted this function straight out of the old driver, - * and have not tested it. Presumably it does what it's - * supposed to do... - */ - -static int in2000_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int *iinfo) -{ - int size; - - size = capacity; - iinfo[0] = 64; - iinfo[1] = 32; - iinfo[2] = size >> 11; - -/* This should approximate the large drive handling that the DOS ASPI manager - uses. Drives very near the boundaries may not be handled correctly (i.e. - near 2.0 Gb and 4.0 Gb) */ - - if (iinfo[2] > 1024) { - iinfo[0] = 64; - iinfo[1] = 63; - iinfo[2] = (unsigned long) capacity / (iinfo[0] * iinfo[1]); - } - if (iinfo[2] > 1024) { - iinfo[0] = 128; - iinfo[1] = 63; - iinfo[2] = (unsigned long) capacity / (iinfo[0] * iinfo[1]); - } - if (iinfo[2] > 1024) { - iinfo[0] = 255; - iinfo[1] = 63; - iinfo[2] = (unsigned long) capacity / (iinfo[0] * iinfo[1]); - } - return 0; -} - - -static int in2000_write_info(struct Scsi_Host *instance, char *buf, int len) -{ - -#ifdef PROC_INTERFACE - - char *bp; - struct IN2000_hostdata *hd; - int x, i; - - hd = (struct IN2000_hostdata *) instance->hostdata; - - buf[len] = '\0'; - bp = buf; - if (!strncmp(bp, "debug:", 6)) { - bp += 6; - hd->args = simple_strtoul(bp, NULL, 0) & DB_MASK; - } else if (!strncmp(bp, "disconnect:", 11)) { - bp += 11; - x = simple_strtoul(bp, NULL, 0); - if (x < DIS_NEVER || x > DIS_ALWAYS) - x = DIS_ADAPTIVE; - hd->disconnect = x; - } else if (!strncmp(bp, "period:", 7)) { - bp += 7; - x = simple_strtoul(bp, NULL, 0); - hd->default_sx_per = sx_table[round_period((unsigned int) x)].period_ns; - } else if (!strncmp(bp, "resync:", 7)) { - bp += 7; - x = simple_strtoul(bp, NULL, 0); - for (i = 0; i < 7; i++) - if (x & (1 << i)) - hd->sync_stat[i] = SS_UNSET; - } else if (!strncmp(bp, "proc:", 5)) { - bp += 5; - hd->proc = simple_strtoul(bp, NULL, 0); - } else if (!strncmp(bp, "level2:", 7)) { - bp += 7; - hd->level2 = simple_strtoul(bp, NULL, 0); - } -#endif - return len; -} - -static int in2000_show_info(struct seq_file *m, struct Scsi_Host *instance) -{ - -#ifdef PROC_INTERFACE - unsigned long flags; - struct IN2000_hostdata *hd; - Scsi_Cmnd *cmd; - int x; - - hd = (struct IN2000_hostdata *) instance->hostdata; - - spin_lock_irqsave(instance->host_lock, flags); - if (hd->proc & PR_VERSION) - seq_printf(m, "\nVersion %s - %s.", IN2000_VERSION, IN2000_DATE); - - if (hd->proc & PR_INFO) { - seq_printf(m, "\ndip_switch=%02x: irq=%d io=%02x floppy=%s sync/DOS5=%s", (hd->dip_switch & 0x7f), instance->irq, hd->io_base, (hd->dip_switch & 0x40) ? "Yes" : "No", (hd->dip_switch & 0x20) ? "Yes" : "No"); - seq_puts(m, "\nsync_xfer[] = "); - for (x = 0; x < 7; x++) - seq_printf(m, "\t%02x", hd->sync_xfer[x]); - seq_puts(m, "\nsync_stat[] = "); - for (x = 0; x < 7; x++) - seq_printf(m, "\t%02x", hd->sync_stat[x]); - } -#ifdef PROC_STATISTICS - if (hd->proc & PR_STATISTICS) { - seq_puts(m, "\ncommands issued: "); - for (x = 0; x < 7; x++) - seq_printf(m, "\t%ld", hd->cmd_cnt[x]); - seq_puts(m, "\ndisconnects allowed:"); - for (x = 0; x < 7; x++) - seq_printf(m, "\t%ld", hd->disc_allowed_cnt[x]); - seq_puts(m, "\ndisconnects done: "); - for (x = 0; x < 7; x++) - seq_printf(m, "\t%ld", hd->disc_done_cnt[x]); - seq_printf(m, "\ninterrupts: \t%ld", hd->int_cnt); - } -#endif - if (hd->proc & PR_CONNECTED) { - seq_puts(m, "\nconnected: "); - if (hd->connected) { - cmd = (Scsi_Cmnd *) hd->connected; - seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]); - } - } - if (hd->proc & PR_INPUTQ) { - seq_puts(m, "\ninput_Q: "); - cmd = (Scsi_Cmnd *) hd->input_Q; - while (cmd) { - seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]); - cmd = (Scsi_Cmnd *) cmd->host_scribble; - } - } - if (hd->proc & PR_DISCQ) { - seq_puts(m, "\ndisconnected_Q:"); - cmd = (Scsi_Cmnd *) hd->disconnected_Q; - while (cmd) { - seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]); - cmd = (Scsi_Cmnd *) cmd->host_scribble; - } - } - if (hd->proc & PR_TEST) { - ; /* insert your own custom function here */ - } - seq_putc(m, '\n'); - spin_unlock_irqrestore(instance->host_lock, flags); -#endif /* PROC_INTERFACE */ - return 0; -} - -MODULE_LICENSE("GPL"); - - -static struct scsi_host_template driver_template = { - .proc_name = "in2000", - .write_info = in2000_write_info, - .show_info = in2000_show_info, - .name = "Always IN2000", - .detect = in2000_detect, - .release = in2000_release, - .queuecommand = in2000_queuecommand, - .eh_abort_handler = in2000_abort, - .eh_bus_reset_handler = in2000_bus_reset, - .bios_param = in2000_biosparam, - .can_queue = IN2000_CAN_Q, - .this_id = IN2000_HOST_ID, - .sg_tablesize = IN2000_SG, - .cmd_per_lun = IN2000_CPL, - .use_clustering = DISABLE_CLUSTERING, -}; -#include "scsi_module.c" diff --git a/drivers/scsi/in2000.h b/drivers/scsi/in2000.h deleted file mode 100644 index 5821e1f..0000000 --- a/drivers/scsi/in2000.h +++ /dev/null @@ -1,412 +0,0 @@ -/* - * in2000.h - Linux device driver definitions for the - * Always IN2000 ISA SCSI card. - * - * IMPORTANT: This file is for version 1.33 - 26/Aug/1998 - * - * Copyright (c) 1996 John Shifflett, GeoLog Consulting - * john@geolog.com - * jshiffle@netcom.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef IN2000_H -#define IN2000_H - -#include <asm/io.h> - -#define PROC_INTERFACE /* add code for /proc/scsi/in2000/xxx interface */ -#ifdef PROC_INTERFACE -#define PROC_STATISTICS /* add code for keeping various real time stats */ -#endif - -#define SYNC_DEBUG /* extra info on sync negotiation printed */ -#define DEBUGGING_ON /* enable command-line debugging bitmask */ -#define DEBUG_DEFAULTS 0 /* default bitmask - change from command-line */ - -#ifdef __i386__ -#define FAST_READ_IO /* No problems with these on my machine */ -#define FAST_WRITE_IO -#endif - -#ifdef DEBUGGING_ON -#define DB(f,a) if (hostdata->args & (f)) a; -#define CHECK_NULL(p,s) /* if (!(p)) {printk("\n"); while (1) printk("NP:%s\r",(s));} */ -#else -#define DB(f,a) -#define CHECK_NULL(p,s) -#endif - -#define uchar unsigned char - -#define read1_io(a) (inb(hostdata->io_base+(a))) -#define read2_io(a) (inw(hostdata->io_base+(a))) -#define write1_io(b,a) (outb((b),hostdata->io_base+(a))) -#define write2_io(w,a) (outw((w),hostdata->io_base+(a))) - -#ifdef __i386__ -/* These inline assembly defines are derived from a patch - * sent to me by Bill Earnest. He's done a lot of very - * valuable thinking, testing, and coding during his effort - * to squeeze more speed out of this driver. I really think - * that we are doing IO at close to the maximum now with - * the fifo. (And yes, insw uses 'edi' while outsw uses - * 'esi'. Thanks Bill!) - */ - -#define FAST_READ2_IO() \ -({ \ -int __dummy_1,__dummy_2; \ - __asm__ __volatile__ ("\n \ - cld \n \ - orl %%ecx, %%ecx \n \ - jz 1f \n \ - rep \n \ - insw (%%dx),%%es:(%%edi) \n \ -1: " \ - : "=D" (sp) ,"=c" (__dummy_1) ,"=d" (__dummy_2) /* output */ \ - : "2" (f), "0" (sp), "1" (i) /* input */ \ - ); /* trashed */ \ -}) - -#define FAST_WRITE2_IO() \ -({ \ -int __dummy_1,__dummy_2; \ - __asm__ __volatile__ ("\n \ - cld \n \ - orl %%ecx, %%ecx \n \ - jz 1f \n \ - rep \n \ - outsw %%ds:(%%esi),(%%dx) \n \ -1: " \ - : "=S" (sp) ,"=c" (__dummy_1) ,"=d" (__dummy_2)/* output */ \ - : "2" (f), "0" (sp), "1" (i) /* input */ \ - ); /* trashed */ \ -}) -#endif - -/* IN2000 io_port offsets */ -#define IO_WD_ASR 0x00 /* R - 3393 auxstat reg */ -#define ASR_INT 0x80 -#define ASR_LCI 0x40 -#define ASR_BSY 0x20 -#define ASR_CIP 0x10 -#define ASR_PE 0x02 -#define ASR_DBR 0x01 -#define IO_WD_ADDR 0x00 /* W - 3393 address reg */ -#define IO_WD_DATA 0x01 /* R/W - rest of 3393 regs */ -#define IO_FIFO 0x02 /* R/W - in2000 dual-port fifo (16 bits) */ -#define IN2000_FIFO_SIZE 2048 /* fifo capacity in bytes */ -#define IO_CARD_RESET 0x03 /* W - in2000 start master reset */ -#define IO_FIFO_COUNT 0x04 /* R - in2000 fifo counter */ -#define IO_FIFO_WRITE 0x05 /* W - clear fifo counter, start write */ -#define IO_FIFO_READ 0x07 /* W - start fifo read */ -#define IO_LED_OFF 0x08 /* W - turn off in2000 activity LED */ -#define IO_SWITCHES 0x08 /* R - read in2000 dip switch */ -#define SW_ADDR0 0x01 /* bit 0 = bit 0 of index to io addr */ -#define SW_ADDR1 0x02 /* bit 1 = bit 1 of index io addr */ -#define SW_DISINT 0x04 /* bit 2 true if ints disabled */ -#define SW_INT0 0x08 /* bit 3 = bit 0 of index to interrupt */ -#define SW_INT1 0x10 /* bit 4 = bit 1 of index to interrupt */ -#define SW_INT_SHIFT 3 /* shift right this amount to right justify int bits */ -#define SW_SYNC_DOS5 0x20 /* bit 5 used by Always BIOS */ -#define SW_FLOPPY 0x40 /* bit 6 true if floppy enabled */ -#define SW_BIT7 0x80 /* bit 7 hardwired true (ground) */ -#define IO_LED_ON 0x09 /* W - turn on in2000 activity LED */ -#define IO_HARDWARE 0x0a /* R - read in2000 hardware rev, stop reset */ -#define IO_INTR_MASK 0x0c /* W - in2000 interrupt mask reg */ -#define IMASK_WD 0x01 /* WD33c93 interrupt mask */ -#define IMASK_FIFO 0x02 /* FIFO interrupt mask */ - -/* wd register names */ -#define WD_OWN_ID 0x00 -#define WD_CONTROL 0x01 -#define WD_TIMEOUT_PERIOD 0x02 -#define WD_CDB_1 0x03 -#define WD_CDB_2 0x04 -#define WD_CDB_3 0x05 -#define WD_CDB_4 0x06 -#define WD_CDB_5 0x07 -#define WD_CDB_6 0x08 -#define WD_CDB_7 0x09 -#define WD_CDB_8 0x0a -#define WD_CDB_9 0x0b -#define WD_CDB_10 0x0c -#define WD_CDB_11 0x0d -#define WD_CDB_12 0x0e -#define WD_TARGET_LUN 0x0f -#define WD_COMMAND_PHASE 0x10 -#define WD_SYNCHRONOUS_TRANSFER 0x11 -#define WD_TRANSFER_COUNT_MSB 0x12 -#define WD_TRANSFER_COUNT 0x13 -#define WD_TRANSFER_COUNT_LSB 0x14 -#define WD_DESTINATION_ID 0x15 -#define WD_SOURCE_ID 0x16 -#define WD_SCSI_STATUS 0x17 -#define WD_COMMAND 0x18 -#define WD_DATA 0x19 -#define WD_QUEUE_TAG 0x1a -#define WD_AUXILIARY_STATUS 0x1f - -/* WD commands */ -#define WD_CMD_RESET 0x00 -#define WD_CMD_ABORT 0x01 -#define WD_CMD_ASSERT_ATN 0x02 -#define WD_CMD_NEGATE_ACK 0x03 -#define WD_CMD_DISCONNECT 0x04 -#define WD_CMD_RESELECT 0x05 -#define WD_CMD_SEL_ATN 0x06 -#define WD_CMD_SEL 0x07 -#define WD_CMD_SEL_ATN_XFER 0x08 -#define WD_CMD_SEL_XFER 0x09 -#define WD_CMD_RESEL_RECEIVE 0x0a -#define WD_CMD_RESEL_SEND 0x0b -#define WD_CMD_WAIT_SEL_RECEIVE 0x0c -#define WD_CMD_TRANS_ADDR 0x18 -#define WD_CMD_TRANS_INFO 0x20 -#define WD_CMD_TRANSFER_PAD 0x21 -#define WD_CMD_SBT_MODE 0x80 - -/* SCSI Bus Phases */ -#define PHS_DATA_OUT 0x00 -#define PHS_DATA_IN 0x01 -#define PHS_COMMAND 0x02 -#define PHS_STATUS 0x03 -#define PHS_MESS_OUT 0x06 -#define PHS_MESS_IN 0x07 - -/* Command Status Register definitions */ - - /* reset state interrupts */ -#define CSR_RESET 0x00 -#define CSR_RESET_AF 0x01 - - /* successful completion interrupts */ -#define CSR_RESELECT 0x10 -#define CSR_SELECT 0x11 -#define CSR_SEL_XFER_DONE 0x16 -#define CSR_XFER_DONE 0x18 - - /* paused or aborted interrupts */ -#define CSR_MSGIN 0x20 -#define CSR_SDP 0x21 -#define CSR_SEL_ABORT 0x22 -#define CSR_RESEL_ABORT 0x25 -#define CSR_RESEL_ABORT_AM 0x27 -#define CSR_ABORT 0x28 - - /* terminated interrupts */ -#define CSR_INVALID 0x40 -#define CSR_UNEXP_DISC 0x41 -#define CSR_TIMEOUT 0x42 -#define CSR_PARITY 0x43 -#define CSR_PARITY_ATN 0x44 -#define CSR_BAD_STATUS 0x45 -#define CSR_UNEXP 0x48 - - /* service required interrupts */ -#define CSR_RESEL 0x80 -#define CSR_RESEL_AM 0x81 -#define CSR_DISC 0x85 -#define CSR_SRV_REQ 0x88 - - /* Own ID/CDB Size register */ -#define OWNID_EAF 0x08 -#define OWNID_EHP 0x10 -#define OWNID_RAF 0x20 -#define OWNID_FS_8 0x00 -#define OWNID_FS_12 0x40 -#define OWNID_FS_16 0x80 - - /* Control register */ -#define CTRL_HSP 0x01 -#define CTRL_HA 0x02 -#define CTRL_IDI 0x04 -#define CTRL_EDI 0x08 -#define CTRL_HHP 0x10 -#define CTRL_POLLED 0x00 -#define CTRL_BURST 0x20 -#define CTRL_BUS 0x40 -#define CTRL_DMA 0x80 - - /* Timeout Period register */ -#define TIMEOUT_PERIOD_VALUE 20 /* results in 200 ms. */ - - /* Synchronous Transfer Register */ -#define STR_FSS 0x80 - - /* Destination ID register */ -#define DSTID_DPD 0x40 -#define DATA_OUT_DIR 0 -#define DATA_IN_DIR 1 -#define DSTID_SCC 0x80 - - /* Source ID register */ -#define SRCID_MASK 0x07 -#define SRCID_SIV 0x08 -#define SRCID_DSP 0x20 -#define SRCID_ES 0x40 -#define SRCID_ER 0x80 - - - -#define ILLEGAL_STATUS_BYTE 0xff - - -#define DEFAULT_SX_PER 500 /* (ns) fairly safe */ -#define DEFAULT_SX_OFF 0 /* aka async */ - -#define OPTIMUM_SX_PER 252 /* (ns) best we can do (mult-of-4) */ -#define OPTIMUM_SX_OFF 12 /* size of in2000 fifo */ - -struct sx_period { - unsigned int period_ns; - uchar reg_value; - }; - - -struct IN2000_hostdata { - struct Scsi_Host *next; - uchar chip; /* what kind of wd33c93 chip? */ - uchar microcode; /* microcode rev if 'B' */ - unsigned short io_base; /* IO port base */ - unsigned int dip_switch; /* dip switch settings */ - unsigned int hrev; /* hardware revision of card */ - volatile uchar busy[8]; /* index = target, bit = lun */ - volatile Scsi_Cmnd *input_Q; /* commands waiting to be started */ - volatile Scsi_Cmnd *selecting; /* trying to select this command */ - volatile Scsi_Cmnd *connected; /* currently connected command */ - volatile Scsi_Cmnd *disconnected_Q;/* commands waiting for reconnect */ - uchar state; /* what we are currently doing */ - uchar fifo; /* what the FIFO is up to */ - uchar level2; /* extent to which Level-2 commands are used */ - uchar disconnect; /* disconnect/reselect policy */ - unsigned int args; /* set from command-line argument */ - uchar incoming_msg[8]; /* filled during message_in phase */ - int incoming_ptr; /* mainly used with EXTENDED messages */ - uchar outgoing_msg[8]; /* send this during next message_out */ - int outgoing_len; /* length of outgoing message */ - unsigned int default_sx_per; /* default transfer period for SCSI bus */ - uchar sync_xfer[8]; /* sync_xfer reg settings per target */ - uchar sync_stat[8]; /* status of sync negotiation per target */ - uchar sync_off; /* bit mask: don't use sync with these targets */ -#ifdef PROC_INTERFACE - uchar proc; /* bit mask: what's in proc output */ -#ifdef PROC_STATISTICS - unsigned long cmd_cnt[8]; /* # of commands issued per target */ - unsigned long int_cnt; /* # of interrupts serviced */ - unsigned long disc_allowed_cnt[8]; /* # of disconnects allowed per target */ - unsigned long disc_done_cnt[8]; /* # of disconnects done per target*/ -#endif -#endif - }; - - -/* defines for hostdata->chip */ - -#define C_WD33C93 0 -#define C_WD33C93A 1 -#define C_WD33C93B 2 -#define C_UNKNOWN_CHIP 100 - -/* defines for hostdata->state */ - -#define S_UNCONNECTED 0 -#define S_SELECTING 1 -#define S_RUNNING_LEVEL2 2 -#define S_CONNECTED 3 -#define S_PRE_TMP_DISC 4 -#define S_PRE_CMP_DISC 5 - -/* defines for hostdata->fifo */ - -#define FI_FIFO_UNUSED 0 -#define FI_FIFO_READING 1 -#define FI_FIFO_WRITING 2 - -/* defines for hostdata->level2 */ -/* NOTE: only the first 3 are trustworthy at this point - - * having trouble when more than 1 device is reading/writing - * at the same time... - */ - -#define L2_NONE 0 /* no combination commands - we get lots of ints */ -#define L2_SELECT 1 /* start with SEL_ATN_XFER, but never resume it */ -#define L2_BASIC 2 /* resume after STATUS ints & RDP messages */ -#define L2_DATA 3 /* resume after DATA_IN/OUT ints */ -#define L2_MOST 4 /* resume after anything except a RESELECT int */ -#define L2_RESELECT 5 /* resume after everything, including RESELECT ints */ -#define L2_ALL 6 /* always resume */ - -/* defines for hostdata->disconnect */ - -#define DIS_NEVER 0 -#define DIS_ADAPTIVE 1 -#define DIS_ALWAYS 2 - -/* defines for hostdata->args */ - -#define DB_TEST 1<<0 -#define DB_FIFO 1<<1 -#define DB_QUEUE_COMMAND 1<<2 -#define DB_EXECUTE 1<<3 -#define DB_INTR 1<<4 -#define DB_TRANSFER 1<<5 -#define DB_MASK 0x3f - -#define A_NO_SCSI_RESET 1<<15 - - -/* defines for hostdata->sync_xfer[] */ - -#define SS_UNSET 0 -#define SS_FIRST 1 -#define SS_WAITING 2 -#define SS_SET 3 - -/* defines for hostdata->proc */ - -#define PR_VERSION 1<<0 -#define PR_INFO 1<<1 -#define PR_STATISTICS 1<<2 -#define PR_CONNECTED 1<<3 -#define PR_INPUTQ 1<<4 -#define PR_DISCQ 1<<5 -#define PR_TEST 1<<6 -#define PR_STOP 1<<7 - - -# include <linux/init.h> -# include <linux/spinlock.h> -# define in2000__INITFUNC(function) __initfunc(function) -# define in2000__INIT __init -# define in2000__INITDATA __initdata -# define CLISPIN_LOCK(host,flags) spin_lock_irqsave(host->host_lock, flags) -# define CLISPIN_UNLOCK(host,flags) spin_unlock_irqrestore(host->host_lock, \ - flags) - -static int in2000_detect(struct scsi_host_template *) in2000__INIT; -static int in2000_queuecommand(struct Scsi_Host *, struct scsi_cmnd *); -static int in2000_abort(Scsi_Cmnd *); -static void in2000_setup(char *, int *) in2000__INIT; -static int in2000_biosparam(struct scsi_device *, struct block_device *, - sector_t, int *); -static int in2000_bus_reset(Scsi_Cmnd *); - - -#define IN2000_CAN_Q 16 -#define IN2000_SG SG_ALL -#define IN2000_CPL 2 -#define IN2000_HOST_ID 7 - -#endif /* IN2000_H */ |