Merge tag 'samsung-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

Merge "Samsung 2nd drivers for 3.16" from Kukjin Kim:

This is including fix exynos cpufreq driver compilation with
ARCH_MULTIPLATFORM. Even though this is a work around, this
is required for support exynos multiplatform for a while and
will be updated in near future.

This is based on tags/samsung-exynos.

* tag 'samsung-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits)
  cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  cpufreq: exynos: Fix the compile error
  ARM: S3C24XX: move debug-macro.S into the common space
  ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
  ARM: S3C24XX: trim down debug uart handling
  ARM: compressed/head.S: remove s3c24xx special case
  ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
  ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
  ARM: EXYNOS: Remove exynos_subsys registration
  ARM: EXYNOS: Remove duplicate lines in Makefile
  ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
  ARM: dts: Remove g2d_pd node for exynos5420
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

7 files changed, 179 insertions, 52 deletions

diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 1416c97..1fad4c5 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -30,6 +30,8 @@
 #define MPLL_CON0		0x4100
 #define SRC_CORE1		0x4204
 #define GATE_IP_ACP		0x8800
+#define GATE_IP_ISP0		0xc800
+#define GATE_IP_ISP1		0xc804
 #define CPLL_LOCK		0x10020
 #define EPLL_LOCK		0x10030
 #define VPLL_LOCK		0x10040
@@ -166,6 +168,8 @@ static unsigned long exynos5250_clk_regs[] __initdata = {
 	PLL_DIV2_SEL,
 	GATE_IP_DISP1,
 	GATE_IP_ACP,
+	GATE_IP_ISP0,
+	GATE_IP_ISP1,
 };
 
 static int exynos5250_clk_suspend(void)
@@ -223,6 +227,7 @@ PNAME(mout_aclk400_p)	= { "mout_aclk400_g3d_mid", "mout_gpll" };
 PNAME(mout_aclk200_sub_p) = { "fin_pll", "div_aclk200" };
 PNAME(mout_aclk266_sub_p) = { "fin_pll", "div_aclk266" };
 PNAME(mout_aclk333_sub_p) = { "fin_pll", "div_aclk333" };
+PNAME(mout_aclk400_isp_sub_p) = { "fin_pll", "div_aclk400_isp" };
 PNAME(mout_hdmi_p)	= { "div_hdmi_pixel", "sclk_hdmiphy" };
 PNAME(mout_usb3_p)	= { "mout_mpll_user", "mout_cpll" };
 PNAME(mout_group1_p)	= { "fin_pll", "fin_pll", "sclk_hdmi27m",
@@ -302,6 +307,7 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
 	MUX(0, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
 	MUX(0, "mout_aclk400_g3d_mid", mout_aclk200_p, SRC_TOP0, 20, 1),
 
+	MUX(0, "mout_aclk400_isp", mout_aclk200_p, SRC_TOP1, 24, 1),
 	MUX(0, "mout_aclk400_g3d", mout_aclk400_p, SRC_TOP1, 28, 1),
 
 	MUX(0, "mout_cpll", mout_cpll_p, SRC_TOP2, 8, 1),
@@ -313,6 +319,9 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
 
 	MUX(0, "mout_aclk200_disp1_sub", mout_aclk200_sub_p, SRC_TOP3, 4, 1),
 	MUX(0, "mout_aclk266_gscl_sub", mout_aclk266_sub_p, SRC_TOP3, 8, 1),
+	MUX(0, "mout_aclk_266_isp_sub", mout_aclk266_sub_p, SRC_TOP3, 16, 1),
+	MUX(0, "mout_aclk_400_isp_sub", mout_aclk400_isp_sub_p,
+			SRC_TOP3, 20, 1),
 	MUX(0, "mout_aclk333_sub", mout_aclk333_sub_p, SRC_TOP3, 24, 1),
 
 	MUX(0, "mout_cam_bayer", mout_group1_p, SRC_GSCL, 12, 4),
@@ -385,6 +394,7 @@ static struct samsung_div_clock exynos5250_div_clks[] __initdata = {
 	DIV(0, "div_aclk400_g3d", "mout_aclk400_g3d", DIV_TOP0,
 							24, 3),
 
+	DIV(0, "div_aclk400_isp", "mout_aclk400_isp", DIV_TOP1, 20, 3),
 	DIV(0, "div_aclk66_pre", "mout_mpll_user", DIV_TOP1, 24, 3),
 
 	DIV(0, "div_cam_bayer", "mout_cam_bayer", DIV_GSCL, 12, 4),
@@ -650,6 +660,31 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
 	GATE(CLK_WDT, "wdt", "div_aclk66", GATE_IP_PERIS, 19, 0, 0),
 	GATE(CLK_RTC, "rtc", "div_aclk66", GATE_IP_PERIS, 20, 0, 0),
 	GATE(CLK_TMU, "tmu", "div_aclk66", GATE_IP_PERIS, 21, 0, 0),
+	GATE(CLK_SMMU_TV, "smmu_tv", "mout_aclk200_disp1_sub",
+			GATE_IP_DISP1, 2, 0, 0),
+	GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "mout_aclk200_disp1_sub",
+			GATE_IP_DISP1, 8, 0, 0),
+	GATE(CLK_SMMU_2D, "smmu_2d", "div_aclk200", GATE_IP_ACP, 7, 0, 0),
+	GATE(CLK_SMMU_FIMC_ISP, "smmu_fimc_isp", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP0, 8, 0, 0),
+	GATE(CLK_SMMU_FIMC_DRC, "smmu_fimc_drc", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP0, 9, 0, 0),
+	GATE(CLK_SMMU_FIMC_FD, "smmu_fimc_fd", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP0, 10, 0, 0),
+	GATE(CLK_SMMU_FIMC_SCC, "smmu_fimc_scc", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP0, 11, 0, 0),
+	GATE(CLK_SMMU_FIMC_SCP, "smmu_fimc_scp", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP0, 12, 0, 0),
+	GATE(CLK_SMMU_FIMC_MCU, "smmu_fimc_mcu", "mout_aclk_400_isp_sub",
+			GATE_IP_ISP0, 13, 0, 0),
+	GATE(CLK_SMMU_FIMC_ODC, "smmu_fimc_odc", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP1, 4, 0, 0),
+	GATE(CLK_SMMU_FIMC_DIS0, "smmu_fimc_dis0", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP1, 5, 0, 0),
+	GATE(CLK_SMMU_FIMC_DIS1, "smmu_fimc_dis1", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP1, 6, 0, 0),
+	GATE(CLK_SMMU_FIMC_3DNR, "smmu_fimc_3dnr", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP1, 7, 0, 0),
 };
 
 static struct samsung_pll_rate_table vpll_24mhz_tbl[] __initdata = {
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 5805035..d2c7b4b 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -30,7 +30,7 @@ config ARM_EXYNOS_CPUFREQ
 
 config ARM_EXYNOS4210_CPUFREQ
 	bool "SAMSUNG EXYNOS4210"
-	depends on CPU_EXYNOS4210 && !ARCH_MULTIPLATFORM
+	depends on CPU_EXYNOS4210
 	default y
 	select ARM_EXYNOS_CPUFREQ
 	help
@@ -41,7 +41,7 @@ config ARM_EXYNOS4210_CPUFREQ
 
 config ARM_EXYNOS4X12_CPUFREQ
 	bool "SAMSUNG EXYNOS4x12"
-	depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
+	depends on SOC_EXYNOS4212 || SOC_EXYNOS4412
 	default y
 	select ARM_EXYNOS_CPUFREQ
 	help
@@ -52,7 +52,7 @@ config ARM_EXYNOS4X12_CPUFREQ
 
 config ARM_EXYNOS5250_CPUFREQ
 	bool "SAMSUNG EXYNOS5250"
-	depends on SOC_EXYNOS5250 && !ARCH_MULTIPLATFORM
+	depends on SOC_EXYNOS5250
 	default y
 	select ARM_EXYNOS_CPUFREQ
 	help
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index f99cfe2..348c8ba 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -17,8 +17,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/cpufreq.h>
 #include <linux/platform_device.h>
-
-#include <plat/cpu.h>
+#include <linux/of.h>
 
 #include "exynos-cpufreq.h"
 
@@ -163,14 +162,22 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 	if (!exynos_info)
 		return -ENOMEM;
 
-	if (soc_is_exynos4210())
+	if (of_machine_is_compatible("samsung,exynos4210")) {
+		exynos_info->type = EXYNOS_SOC_4210;
 		ret = exynos4210_cpufreq_init(exynos_info);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
+	} else if (of_machine_is_compatible("samsung,exynos4212")) {
+		exynos_info->type = EXYNOS_SOC_4212;
+		ret = exynos4x12_cpufreq_init(exynos_info);
+	} else if (of_machine_is_compatible("samsung,exynos4412")) {
+		exynos_info->type = EXYNOS_SOC_4412;
 		ret = exynos4x12_cpufreq_init(exynos_info);
-	else if (soc_is_exynos5250())
+	} else if (of_machine_is_compatible("samsung,exynos5250")) {
+		exynos_info->type = EXYNOS_SOC_5250;
 		ret = exynos5250_cpufreq_init(exynos_info);
-	else
-		return 0;
+	} else {
+		pr_err("%s: Unknown SoC type\n", __func__);
+		return -ENODEV;
+	}
 
 	if (ret)
 		goto err_vdd_arm;
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index 3ddade8..51af42e 100644
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -17,6 +17,13 @@ enum cpufreq_level_index {
 	L20,
 };
 
+enum exynos_soc_type {
+	EXYNOS_SOC_4210,
+	EXYNOS_SOC_4212,
+	EXYNOS_SOC_4412,
+	EXYNOS_SOC_5250,
+};
+
 #define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
 	{ \
 		.freq = (f) * 1000, \
@@ -34,6 +41,7 @@ struct apll_freq {
 };
 
 struct exynos_dvfs_info {
+	enum exynos_soc_type type;
 	unsigned long	mpll_freq_khz;
 	unsigned int	pll_safe_idx;
 	struct clk	*cpu_clk;
@@ -41,6 +49,7 @@ struct exynos_dvfs_info {
 	struct cpufreq_frequency_table	*freq_table;
 	void (*set_freq)(unsigned int, unsigned int);
 	bool (*need_apll_change)(unsigned int, unsigned int);
+	void __iomem	*cmu_regs;
 };
 
 #ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ
@@ -68,24 +77,21 @@ static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 }
 #endif
 
-#include <plat/cpu.h>
-#include <mach/map.h>
-
-#define EXYNOS4_CLKSRC_CPU			(S5P_VA_CMU + 0x14200)
-#define EXYNOS4_CLKMUX_STATCPU			(S5P_VA_CMU + 0x14400)
+#define EXYNOS4_CLKSRC_CPU			0x14200
+#define EXYNOS4_CLKMUX_STATCPU			0x14400
 
-#define EXYNOS4_CLKDIV_CPU			(S5P_VA_CMU + 0x14500)
-#define EXYNOS4_CLKDIV_CPU1			(S5P_VA_CMU + 0x14504)
-#define EXYNOS4_CLKDIV_STATCPU			(S5P_VA_CMU + 0x14600)
-#define EXYNOS4_CLKDIV_STATCPU1			(S5P_VA_CMU + 0x14604)
+#define EXYNOS4_CLKDIV_CPU			0x14500
+#define EXYNOS4_CLKDIV_CPU1			0x14504
+#define EXYNOS4_CLKDIV_STATCPU			0x14600
+#define EXYNOS4_CLKDIV_STATCPU1			0x14604
 
 #define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT	(16)
 #define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK	(0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
 
-#define EXYNOS5_APLL_LOCK			(S5P_VA_CMU + 0x00000)
-#define EXYNOS5_APLL_CON0			(S5P_VA_CMU + 0x00100)
-#define EXYNOS5_CLKMUX_STATCPU			(S5P_VA_CMU + 0x00400)
-#define EXYNOS5_CLKDIV_CPU0			(S5P_VA_CMU + 0x00500)
-#define EXYNOS5_CLKDIV_CPU1			(S5P_VA_CMU + 0x00504)
-#define EXYNOS5_CLKDIV_STATCPU0			(S5P_VA_CMU + 0x00600)
-#define EXYNOS5_CLKDIV_STATCPU1			(S5P_VA_CMU + 0x00604)
+#define EXYNOS5_APLL_LOCK			0x00000
+#define EXYNOS5_APLL_CON0			0x00100
+#define EXYNOS5_CLKMUX_STATCPU			0x00400
+#define EXYNOS5_CLKDIV_CPU0			0x00500
+#define EXYNOS5_CLKDIV_CPU1			0x00504
+#define EXYNOS5_CLKDIV_STATCPU0			0x00600
+#define EXYNOS5_CLKDIV_STATCPU1			0x00604
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index 6384e5b..61a5431 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -16,6 +16,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "exynos-cpufreq.h"
 
@@ -23,6 +25,7 @@ static struct clk *cpu_clk;
 static struct clk *moutcore;
 static struct clk *mout_mpll;
 static struct clk *mout_apll;
+static struct exynos_dvfs_info *cpufreq;
 
 static unsigned int exynos4210_volt_table[] = {
 	1250000, 1150000, 1050000, 975000, 950000,
@@ -60,20 +63,20 @@ static void exynos4210_set_clkdiv(unsigned int div_index)
 
 	tmp = apll_freq_4210[div_index].clk_div_cpu0;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
 
 	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU);
 	} while (tmp & 0x1111111);
 
 	/* Change Divider - CPU1 */
 
 	tmp = apll_freq_4210[div_index].clk_div_cpu1;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
 
 	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
 	} while (tmp & 0x11);
 }
 
@@ -85,7 +88,7 @@ static void exynos4210_set_apll(unsigned int index)
 	clk_set_parent(moutcore, mout_mpll);
 
 	do {
-		tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
 			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
 		tmp &= 0x7;
 	} while (tmp != 0x2);
@@ -96,7 +99,7 @@ static void exynos4210_set_apll(unsigned int index)
 	clk_set_parent(moutcore, mout_apll);
 
 	do {
-		tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
 		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
 	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
 }
@@ -115,8 +118,30 @@ static void exynos4210_set_frequency(unsigned int old_index,
 
 int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
 {
+	struct device_node *np;
 	unsigned long rate;
 
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * controller registers directly and remove static mappings and
+	 * dependencies on platform headers. It is necessary to enable
+	 * Exynos multi-platform support and will be removed together with
+	 * this whole driver as soon as Exynos gets migrated to use
+	 * cpufreq-cpu0 driver.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock");
+	if (!np) {
+		pr_err("%s: failed to find clock controller DT node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	info->cmu_regs = of_iomap(np, 0);
+	if (!info->cmu_regs) {
+		pr_err("%s: failed to map CMU registers\n", __func__);
+		return -EFAULT;
+	}
+
 	cpu_clk = clk_get(NULL, "armclk");
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
@@ -143,6 +168,8 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
 	info->freq_table = exynos4210_freq_table;
 	info->set_freq = exynos4210_set_frequency;
 
+	cpufreq = info;
+
 	return 0;
 
 err_mout_apll:
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 466c76a..351a207 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -16,6 +16,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "exynos-cpufreq.h"
 
@@ -23,6 +25,7 @@ static struct clk *cpu_clk;
 static struct clk *moutcore;
 static struct clk *mout_mpll;
 static struct clk *mout_apll;
+static struct exynos_dvfs_info *cpufreq;
 
 static unsigned int exynos4x12_volt_table[] = {
 	1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
@@ -100,28 +103,26 @@ static struct apll_freq apll_freq_4412[] = {
 static void exynos4x12_set_clkdiv(unsigned int div_index)
 {
 	unsigned int tmp;
-	unsigned int stat_cpu1;
 
 	/* Change Divider - CPU0 */
 
 	tmp = apll_freq_4x12[div_index].clk_div_cpu0;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
 
-	while (__raw_readl(EXYNOS4_CLKDIV_STATCPU) & 0x11111111)
+	while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU)
+	       & 0x11111111)
 		cpu_relax();
 
 	/* Change Divider - CPU1 */
 	tmp = apll_freq_4x12[div_index].clk_div_cpu1;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
-	if (soc_is_exynos4212())
-		stat_cpu1 = 0x11;
-	else
-		stat_cpu1 = 0x111;
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
 
-	while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1)
+	do {
 		cpu_relax();
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
+	} while (tmp != 0x0);
 }
 
 static void exynos4x12_set_apll(unsigned int index)
@@ -133,7 +134,7 @@ static void exynos4x12_set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
 			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
 		tmp &= 0x7;
 	} while (tmp != 0x2);
@@ -145,7 +146,7 @@ static void exynos4x12_set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
 		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
 	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
 }
@@ -164,8 +165,30 @@ static void exynos4x12_set_frequency(unsigned int old_index,
 
 int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
 {
+	struct device_node *np;
 	unsigned long rate;
 
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * controller registers directly and remove static mappings and
+	 * dependencies on platform headers. It is necessary to enable
+	 * Exynos multi-platform support and will be removed together with
+	 * this whole driver as soon as Exynos gets migrated to use
+	 * cpufreq-cpu0 driver.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock");
+	if (!np) {
+		pr_err("%s: failed to find clock controller DT node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	info->cmu_regs = of_iomap(np, 0);
+	if (!info->cmu_regs) {
+		pr_err("%s: failed to map CMU registers\n", __func__);
+		return -EFAULT;
+	}
+
 	cpu_clk = clk_get(NULL, "armclk");
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
@@ -184,7 +207,7 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
 	if (IS_ERR(mout_apll))
 		goto err_mout_apll;
 
-	if (soc_is_exynos4212())
+	if (info->type == EXYNOS_SOC_4212)
 		apll_freq_4x12 = apll_freq_4212;
 	else
 		apll_freq_4x12 = apll_freq_4412;
@@ -197,6 +220,8 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
 	info->freq_table = exynos4x12_freq_table;
 	info->set_freq = exynos4x12_set_frequency;
 
+	cpufreq = info;
+
 	return 0;
 
 err_mout_apll:
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index 363a0b3..c91ce69 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -16,8 +16,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
-
-#include <mach/map.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "exynos-cpufreq.h"
 
@@ -25,6 +25,7 @@ static struct clk *cpu_clk;
 static struct clk *moutcore;
 static struct clk *mout_mpll;
 static struct clk *mout_apll;
+static struct exynos_dvfs_info *cpufreq;
 
 static unsigned int exynos5250_volt_table[] = {
 	1300000, 1250000, 1225000, 1200000, 1150000,
@@ -87,17 +88,18 @@ static void set_clkdiv(unsigned int div_index)
 
 	tmp = apll_freq_5250[div_index].clk_div_cpu0;
 
-	__raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0);
 
-	while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111)
+	while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0)
+	       & 0x11111111)
 		cpu_relax();
 
 	/* Change Divider - CPU1 */
 	tmp = apll_freq_5250[div_index].clk_div_cpu1;
 
-	__raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1);
 
-	while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11)
+	while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11)
 		cpu_relax();
 }
 
@@ -111,7 +113,8 @@ static void set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16);
+		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU)
+			>> 16);
 		tmp &= 0x7;
 	} while (tmp != 0x2);
 
@@ -122,7 +125,7 @@ static void set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU);
 		tmp &= (0x7 << 16);
 	} while (tmp != (0x1 << 16));
 }
@@ -141,8 +144,30 @@ static void exynos5250_set_frequency(unsigned int old_index,
 
 int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 {
+	struct device_node *np;
 	unsigned long rate;
 
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * controller registers directly and remove static mappings and
+	 * dependencies on platform headers. It is necessary to enable
+	 * Exynos multi-platform support and will be removed together with
+	 * this whole driver as soon as Exynos gets migrated to use
+	 * cpufreq-cpu0 driver.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock");
+	if (!np) {
+		pr_err("%s: failed to find clock controller DT node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	info->cmu_regs = of_iomap(np, 0);
+	if (!info->cmu_regs) {
+		pr_err("%s: failed to map CMU registers\n", __func__);
+		return -EFAULT;
+	}
+
 	cpu_clk = clk_get(NULL, "armclk");
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
@@ -169,6 +194,8 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 	info->freq_table = exynos5250_freq_table;
 	info->set_freq = exynos5250_set_frequency;
 
+	cpufreq = info;
+
 	return 0;
 
 err_mout_apll: