Merge branch 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Just a few fixes for radeon for 3.17.

* 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon/dpm: set the thermal type properly for special configs
  drm/radeon: reduce memory footprint for debugging
  drm/radeon: add connector quirk for fujitsu board
  drm/radeon: fix semaphore value init
  drm/radeon: only use me/pfp sync on evergreen+

4 files changed, 31 insertions, 15 deletions

diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index b1e11f8..ac14b67 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -405,16 +405,13 @@ bool radeon_dp_getdpcd(struct radeon_connector *radeon_connector)
 	u8 msg[DP_DPCD_SIZE];
 	int ret;
 
-	char dpcd_hex_dump[DP_DPCD_SIZE * 3];
-
 	ret = drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_DPCD_REV, msg,
 			       DP_DPCD_SIZE);
 	if (ret > 0) {
 		memcpy(dig_connector->dpcd, msg, DP_DPCD_SIZE);
 
-		hex_dump_to_buffer(dig_connector->dpcd, sizeof(dig_connector->dpcd),
-				   32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
-		DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
+		DRM_DEBUG_KMS("DPCD: %*ph\n", (int)sizeof(dig_connector->dpcd),
+			      dig_connector->dpcd);
 
 		radeon_dp_probe_oui(radeon_connector);
 
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index e616eb5..3cfb500 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2769,8 +2769,8 @@ bool r600_semaphore_ring_emit(struct radeon_device *rdev,
 	radeon_ring_write(ring, lower_32_bits(addr));
 	radeon_ring_write(ring, (upper_32_bits(addr) & 0xff) | sel);
 
-	/* PFP_SYNC_ME packet only exists on 7xx+ */
-	if (emit_wait && (rdev->family >= CHIP_RV770)) {
+	/* PFP_SYNC_ME packet only exists on 7xx+, only enable it on eg+ */
+	if (emit_wait && (rdev->family >= CHIP_CEDAR)) {
 		/* Prevent the PFP from running ahead of the semaphore wait */
 		radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
 		radeon_ring_write(ring, 0x0);
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 92b2d8d..e74c7e3 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -447,6 +447,13 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 		}
 	}
 
+	/* Fujitsu D3003-S2 board lists DVI-I as DVI-I and VGA */
+	if ((dev->pdev->device == 0x9805) &&
+	    (dev->pdev->subsystem_vendor == 0x1734) &&
+	    (dev->pdev->subsystem_device == 0x11bd)) {
+		if (*connector_type == DRM_MODE_CONNECTOR_VGA)
+			return false;
+	}
 
 	return true;
 }
@@ -2281,19 +2288,31 @@ static void radeon_atombios_add_pplib_thermal_controller(struct radeon_device *r
 				 (controller->ucFanParameters &
 				  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
 			rdev->pm.int_thermal_type = THERMAL_TYPE_KV;
-		} else if ((controller->ucType ==
-			    ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO) ||
-			   (controller->ucType ==
-			    ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL) ||
-			   (controller->ucType ==
-			    ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL)) {
-			DRM_INFO("Special thermal controller config\n");
+		} else if (controller->ucType ==
+			   ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO) {
+			DRM_INFO("External GPIO thermal controller %s fan control\n",
+				 (controller->ucFanParameters &
+				  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+			rdev->pm.int_thermal_type = THERMAL_TYPE_EXTERNAL_GPIO;
+		} else if (controller->ucType ==
+			   ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL) {
+			DRM_INFO("ADT7473 with internal thermal controller %s fan control\n",
+				 (controller->ucFanParameters &
+				  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+			rdev->pm.int_thermal_type = THERMAL_TYPE_ADT7473_WITH_INTERNAL;
+		} else if (controller->ucType ==
+			   ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL) {
+			DRM_INFO("EMC2103 with internal thermal controller %s fan control\n",
+				 (controller->ucFanParameters &
+				  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+			rdev->pm.int_thermal_type = THERMAL_TYPE_EMC2103_WITH_INTERNAL;
 		} else if (controller->ucType < ARRAY_SIZE(pp_lib_thermal_controller_names)) {
 			DRM_INFO("Possible %s thermal controller at 0x%02x %s fan control\n",
 				 pp_lib_thermal_controller_names[controller->ucType],
 				 controller->ucI2cAddress >> 1,
 				 (controller->ucFanParameters &
 				  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+			rdev->pm.int_thermal_type = THERMAL_TYPE_EXTERNAL;
 			i2c_bus = radeon_lookup_i2c_gpio(rdev, controller->ucI2cLine);
 			rdev->pm.i2c_bus = radeon_i2c_lookup(rdev, &i2c_bus);
 			if (rdev->pm.i2c_bus) {
diff --git a/drivers/gpu/drm/radeon/radeon_semaphore.c b/drivers/gpu/drm/radeon/radeon_semaphore.c
index 56d9fd6..abd6753 100644
--- a/drivers/gpu/drm/radeon/radeon_semaphore.c
+++ b/drivers/gpu/drm/radeon/radeon_semaphore.c
@@ -34,7 +34,7 @@
 int radeon_semaphore_create(struct radeon_device *rdev,
 			    struct radeon_semaphore **semaphore)
 {
-	uint32_t *cpu_addr;
+	uint64_t *cpu_addr;
 	int i, r;
 
 	*semaphore = kmalloc(sizeof(struct radeon_semaphore), GFP_KERNEL);