diff options
author | Roland Stigge <stigge@antcom.de> | 2012-04-29 14:47:06 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-05-01 17:36:18 (GMT) |
commit | 73108aa90cbfc663649885a06fe5c1235307de1c (patch) | |
tree | 2a380085e86514a1e3916758f06266fbfbcfd315 /drivers | |
parent | 24a28e4283510dcd58890379a42b8a7d3201d9d3 (diff) | |
download | linux-73108aa90cbfc663649885a06fe5c1235307de1c.tar.xz |
USB: ohci-nxp: Use isp1301 driver
ohci-nxp duplicates the isp1301 driver. This patch removes this code and makes
ohci-nxp use the new separate isp1301 driver instead.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/host/Kconfig | 1 | ||||
-rw-r--r-- | drivers/usb/host/ohci-nxp.c | 121 |
2 files changed, 16 insertions, 106 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 896fc91..684a7bb 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -292,6 +292,7 @@ config USB_OHCI_HCD depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 select USB_OTG_UTILS if ARCH_OMAP + select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008 ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index bf542e7..1e364ec 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/of.h> +#include <linux/usb/isp1301.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -58,54 +59,6 @@ #define TRANSPARENT_I2C_EN (1 << 7) #define HOST_EN (1 << 0) -/* ISP1301 USB transceiver I2C registers */ -#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ - -#define MC1_SPEED_REG (1 << 0) -#define MC1_SUSPEND_REG (1 << 1) -#define MC1_DAT_SE0 (1 << 2) -#define MC1_TRANSPARENT (1 << 3) -#define MC1_BDIS_ACON_EN (1 << 4) -#define MC1_OE_INT_EN (1 << 5) -#define MC1_UART_EN (1 << 6) -#define MC1_MASK 0x7f - -#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ - -#define MC2_GLOBAL_PWR_DN (1 << 0) -#define MC2_SPD_SUSP_CTRL (1 << 1) -#define MC2_BI_DI (1 << 2) -#define MC2_TRANSP_BDIR0 (1 << 3) -#define MC2_TRANSP_BDIR1 (1 << 4) -#define MC2_AUDIO_EN (1 << 5) -#define MC2_PSW_EN (1 << 6) -#define MC2_EN2V7 (1 << 7) - -#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ -# define OTG1_DP_PULLUP (1 << 0) -# define OTG1_DM_PULLUP (1 << 1) -# define OTG1_DP_PULLDOWN (1 << 2) -# define OTG1_DM_PULLDOWN (1 << 3) -# define OTG1_ID_PULLDOWN (1 << 4) -# define OTG1_VBUS_DRV (1 << 5) -# define OTG1_VBUS_DISCHRG (1 << 6) -# define OTG1_VBUS_CHRG (1 << 7) -#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */ -# define OTG_B_SESS_END (1 << 6) -# define OTG_B_SESS_VLD (1 << 7) - -#define ISP1301_I2C_ADDR 0x2C - -#define ISP1301_I2C_MODE_CONTROL_1 0x4 -#define ISP1301_I2C_MODE_CONTROL_2 0x12 -#define ISP1301_I2C_OTG_CONTROL_1 0x6 -#define ISP1301_I2C_OTG_CONTROL_2 0x10 -#define ISP1301_I2C_INTERRUPT_SOURCE 0x8 -#define ISP1301_I2C_INTERRUPT_LATCH 0xA -#define ISP1301_I2C_INTERRUPT_FALLING 0xC -#define ISP1301_I2C_INTERRUPT_RISING 0xE -#define ISP1301_I2C_REG_CLEAR_ADDR 1 - /* On LPC32xx, those are undefined */ #ifndef start_int_set_falling_edge #define start_int_set_falling_edge(irq) @@ -115,41 +68,12 @@ #define start_int_umask(irq) #endif -static struct i2c_driver isp1301_driver; static struct i2c_client *isp1301_i2c_client; extern int usb_disabled(void); static struct clk *usb_clk; -static const unsigned short normal_i2c[] = - { ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END }; - -static int isp1301_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - return 0; -} - -static int isp1301_remove(struct i2c_client *client) -{ - return 0; -} - -static const struct i2c_device_id isp1301_id[] = { - { "isp1301_nxp", 0 }, - { } -}; - -static struct i2c_driver isp1301_driver = { - .driver = { - .name = "isp1301_nxp", - }, - .probe = isp1301_probe, - .remove = isp1301_remove, - .id_table = isp1301_id, -}; - static void isp1301_configure_pnx4008(void) { /* PNX4008 only supports DAT_SE0 USB mode */ @@ -373,11 +297,22 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) struct usb_hcd *hcd = 0; struct ohci_hcd *ohci; const struct hc_driver *driver = &ohci_nxp_hc_driver; - struct i2c_adapter *i2c_adap; - struct i2c_board_info i2c_info; struct resource *res; - int ret = 0, irq; + struct device_node *isp1301_node; + + if (pdev->dev.of_node) { + isp1301_node = of_parse_phandle(pdev->dev.of_node, + "transceiver", 0); + } else { + isp1301_node = NULL; + } + + isp1301_i2c_client = isp1301_get_client(isp1301_node); + if (!isp1301_i2c_client) { + ret = -EPROBE_DEFER; + goto out; + } pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; @@ -392,28 +327,6 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) /* Enable AHB slave USB clock, needed for further USB clock control */ __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL); - ret = i2c_add_driver(&isp1301_driver); - if (ret < 0) { - dev_err(&pdev->dev, "failed to add ISP1301 driver\n"); - goto out; - } - i2c_adap = i2c_get_adapter(2); - if (!i2c_adap) { - dev_err(&pdev->dev, "failed on i2c_get_adapter"); - goto out_i2c_driver; - } - - memset(&i2c_info, 0, sizeof(struct i2c_board_info)); - strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE); - isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info, - normal_i2c, NULL); - i2c_put_adapter(i2c_adap); - if (!isp1301_i2c_client) { - dev_err(&pdev->dev, "failed to connect I2C to ISP1301 USB Transceiver\n"); - ret = -ENODEV; - goto out_i2c_driver; - } - isp1301_configure(); /* Enable USB PLL */ @@ -495,10 +408,7 @@ out3: out2: clk_put(usb_clk); out1: - i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; -out_i2c_driver: - i2c_del_driver(&isp1301_driver); out: return ret; } @@ -516,7 +426,6 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev) clk_put(usb_clk); i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; - i2c_del_driver(&isp1301_driver); platform_set_drvdata(pdev, NULL); |