diff options
author | Emil Tantilov <emil.s.tantilov@intel.com> | 2011-02-19 08:43:44 (GMT) |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-03-03 12:20:18 (GMT) |
commit | 8c7bea32c4ebe02dbb574a49db418036da177326 (patch) | |
tree | b6c0928b4fb646a661d8b08ca72634dcab503805 /drivers | |
parent | 63d778df6d817ea69cadd701abbfa1c491623b50 (diff) | |
download | linux-8c7bea32c4ebe02dbb574a49db418036da177326.tar.xz |
ixgbe: Numerous whitespace / formatting cleanups
This patch contains a number of whitespace and formatting cleanups.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 7 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 19 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 7 |
3 files changed, 15 insertions, 18 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index a5b83b7..8f5e347 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -627,7 +627,6 @@ out: return 0; } - /** * ixgbe_setup_mac_link_82598 - Set MAC link speed * @hw: pointer to hardware structure @@ -698,7 +697,6 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, /* Setup the PHY according to input speed */ status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, autoneg_wait_to_complete); - /* Set up MAC */ ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); @@ -1013,13 +1011,12 @@ static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) } /** - * ixgbe_read_i2c_eeprom_82598 - Read 8 bit EEPROM word of an SFP+ module - * over I2C interface through an intermediate phy. + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. * @hw: pointer to hardware structure * @byte_offset: EEPROM byte offset to read * @eeprom_data: value read * - * Performs byte read operation to SFP module's EEPROM over I2C interface. + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. **/ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 69d345b..5e2edcd 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -417,14 +417,14 @@ static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, return status; } - /** - * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser - * @hw: pointer to hardware structure - * - * The base drivers may require better control over SFP+ module - * PHY states. This includes selectively shutting down the Tx - * laser on the PHY, effectively halting physical link. - **/ +/** + * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively shutting down the Tx + * laser on the PHY, effectively halting physical link. + **/ static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) { u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); @@ -542,7 +542,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, * Section 73.10.2, we may have to wait up to 500ms if KR is * attempted. 82599 uses the same timing for 10g SFI. */ - for (i = 0; i < 5; i++) { /* Wait for the link partner to also set speed */ msleep(100); @@ -767,7 +766,6 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, else orig_autoc = autoc; - if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { @@ -1926,6 +1924,7 @@ static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) break; else + /* Use interrupt-safe sleep just in case */ udelay(10); } diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index a12f7c7..33f568c 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -1188,7 +1188,7 @@ s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) if (status == 0) { checksum = hw->eeprom.ops.calc_checksum(hw); status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, - checksum); + checksum); } else { hw_dbg(hw, "EEPROM read failed\n"); } @@ -1555,7 +1555,9 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num) * 2: Tx flow control is enabled (we can send pause frames but * we do not support receiving pause frames). * 3: Both Rx and Tx flow control (symmetric) are enabled. +#ifdef CONFIG_DCB * 4: Priority Flow Control is enabled. +#endif * other: Invalid. */ switch (hw->fc.current_mode) { @@ -2392,7 +2394,6 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) { int i; - for (i = 0; i < 128; i++) IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); @@ -2621,7 +2622,7 @@ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) * Reads the links register to determine if link is up and the current speed **/ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up, bool link_up_wait_to_complete) + bool *link_up, bool link_up_wait_to_complete) { u32 links_reg, links_orig; u32 i; |