summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorAndiry Xu <andiry.xu@amd.com>2011-09-23 21:19:51 (GMT)
committerGreg Kroah-Hartman <gregkh@suse.de>2011-09-26 22:51:10 (GMT)
commit9574323c39d1f8359a04843075d89c9f32d8b7e6 (patch)
tree38514abe7e4485face5fa1fb081c4a51a6f300c7 /drivers
parentfc71ff7583b14347fa1cb592b698f088ecff36e3 (diff)
downloadlinux-9574323c39d1f8359a04843075d89c9f32d8b7e6.tar.xz
xHCI: test USB2 software LPM
This patch tests USB2 software LPM for a USB2 LPM-capable device. When a lpm-capable device is addressed, if the host also supports software LPM, apply a test by putting the device into L1 state and resume it to see if the device can do L1 suspend/resume successfully. If the device fails to enter L1 or resume from L1 state, it may not function normally and usbcore may disconnect and re-enumerate it. In this case, store the device's Vid and Pid information, make sure the host will not test LPM for it twice. The test result is per device/host. Some devices claim to be lpm-capable, but fail to enter L1 or resume. So the test is necessary. The xHCI 1.0 errata has modified the USB2.0 LPM implementation. It redefines the HIRD field to BESL, and adds another register Port Hardware LPM Control (PORTHLPMC). However, this should not affect the LPM behavior on xHC which does not implement 1.0 errata. USB2.0 LPM errata defines a new bit BESL in the device's USB 2.0 extension descriptor. If the device reports it uses BESL, driver should use BESL instead of HIRD for it. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/host/xhci-mem.c11
-rw-r--r--drivers/usb/host/xhci-pci.c4
-rw-r--r--drivers/usb/host/xhci.c181
-rw-r--r--drivers/usb/host/xhci.h16
4 files changed, 211 insertions, 1 deletions
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9c7ddf0..3ec2ac9 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1685,6 +1685,8 @@ void xhci_free_command(struct xhci_hcd *xhci,
void xhci_mem_cleanup(struct xhci_hcd *xhci)
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ struct dev_info *dev_info, *next;
+ unsigned long flags;
int size;
int i;
@@ -1742,6 +1744,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
scratchpad_free(xhci);
+ spin_lock_irqsave(&xhci->lock, flags);
+ list_for_each_entry_safe(dev_info, next, &xhci->lpm_failed_devs, list) {
+ list_del(&dev_info->list);
+ kfree(dev_info);
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
xhci->num_usb2_ports = 0;
xhci->num_usb3_ports = 0;
kfree(xhci->usb2_ports);
@@ -2328,6 +2337,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
if (xhci_setup_port_arrays(xhci, flags))
goto fail;
+ INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+
return 0;
fail:
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index a111099..213a7d7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -345,6 +345,10 @@ static const struct hc_driver xhci_pci_hc_driver = {
.hub_status_data = xhci_hub_status_data,
.bus_suspend = xhci_bus_suspend,
.bus_resume = xhci_bus_resume,
+ /*
+ * call back when device connected and addressed
+ */
+ .update_device = xhci_update_device,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 54cb762..b0649a4 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3539,6 +3539,187 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
return 0;
}
+#ifdef CONFIG_USB_SUSPEND
+
+/* BESL to HIRD Encoding array for USB2 LPM */
+static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000,
+ 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000};
+
+/* Calculate HIRD/BESL for USB2 PORTPMSC*/
+static int xhci_calculate_hird_besl(int u2del, bool use_besl)
+{
+ int hird;
+
+ if (use_besl) {
+ for (hird = 0; hird < 16; hird++) {
+ if (xhci_besl_encoding[hird] >= u2del)
+ break;
+ }
+ } else {
+ if (u2del <= 50)
+ hird = 0;
+ else
+ hird = (u2del - 51) / 75 + 1;
+
+ if (hird > 15)
+ hird = 15;
+ }
+
+ return hird;
+}
+
+static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
+ struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct dev_info *dev_info;
+ __le32 __iomem **port_array;
+ __le32 __iomem *addr, *pm_addr;
+ u32 temp, dev_id;
+ unsigned int port_num;
+ unsigned long flags;
+ int u2del, hird;
+ int ret;
+
+ if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support ||
+ !udev->lpm_capable)
+ return -EINVAL;
+
+ /* we only support lpm for non-hub device connected to root hub yet */
+ if (!udev->parent || udev->parent->parent ||
+ udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+ return -EINVAL;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ /* Look for devices in lpm_failed_devs list */
+ dev_id = le16_to_cpu(udev->descriptor.idVendor) << 16 |
+ le16_to_cpu(udev->descriptor.idProduct);
+ list_for_each_entry(dev_info, &xhci->lpm_failed_devs, list) {
+ if (dev_info->dev_id == dev_id) {
+ ret = -EINVAL;
+ goto finish;
+ }
+ }
+
+ port_array = xhci->usb2_ports;
+ port_num = udev->portnum - 1;
+
+ if (port_num > HCS_MAX_PORTS(xhci->hcs_params1)) {
+ xhci_dbg(xhci, "invalid port number %d\n", udev->portnum);
+ ret = -EINVAL;
+ goto finish;
+ }
+
+ /*
+ * Test USB 2.0 software LPM.
+ * FIXME: some xHCI 1.0 hosts may implement a new register to set up
+ * hardware-controlled USB 2.0 LPM. See section 5.4.11 and 4.23.5.1.1.1
+ * in the June 2011 errata release.
+ */
+ xhci_dbg(xhci, "test port %d software LPM\n", port_num);
+ /*
+ * Set L1 Device Slot and HIRD/BESL.
+ * Check device's USB 2.0 extension descriptor to determine whether
+ * HIRD or BESL shoule be used. See USB2.0 LPM errata.
+ */
+ pm_addr = port_array[port_num] + 1;
+ u2del = HCS_U2_LATENCY(xhci->hcs_params3);
+ if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2))
+ hird = xhci_calculate_hird_besl(u2del, 1);
+ else
+ hird = xhci_calculate_hird_besl(u2del, 0);
+
+ temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird);
+ xhci_writel(xhci, temp, pm_addr);
+
+ /* Set port link state to U2(L1) */
+ addr = port_array[port_num];
+ xhci_set_link_state(xhci, port_array, port_num, XDEV_U2);
+
+ /* wait for ACK */
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ msleep(10);
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ /* Check L1 Status */
+ ret = handshake(xhci, pm_addr, PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
+ if (ret != -ETIMEDOUT) {
+ /* enter L1 successfully */
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, "port %d entered L1 state, port status 0x%x\n",
+ port_num, temp);
+ ret = 0;
+ } else {
+ temp = xhci_readl(xhci, pm_addr);
+ xhci_dbg(xhci, "port %d software lpm failed, L1 status %d\n",
+ port_num, temp & PORT_L1S_MASK);
+ ret = -EINVAL;
+ }
+
+ /* Resume the port */
+ xhci_set_link_state(xhci, port_array, port_num, XDEV_U0);
+
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ msleep(10);
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ /* Clear PLC */
+ xhci_test_and_clear_bit(xhci, port_array, port_num, PORT_PLC);
+
+ /* Check PORTSC to make sure the device is in the right state */
+ if (!ret) {
+ temp = xhci_readl(xhci, addr);
+ xhci_dbg(xhci, "resumed port %d status 0x%x\n", port_num, temp);
+ if (!(temp & PORT_CONNECT) || !(temp & PORT_PE) ||
+ (temp & PORT_PLS_MASK) != XDEV_U0) {
+ xhci_dbg(xhci, "port L1 resume fail\n");
+ ret = -EINVAL;
+ }
+ }
+
+ if (ret) {
+ /* Insert dev to lpm_failed_devs list */
+ xhci_warn(xhci, "device LPM test failed, may disconnect and "
+ "re-enumerate\n");
+ dev_info = kzalloc(sizeof(struct dev_info), GFP_ATOMIC);
+ if (!dev_info) {
+ ret = -ENOMEM;
+ goto finish;
+ }
+ dev_info->dev_id = dev_id;
+ INIT_LIST_HEAD(&dev_info->list);
+ list_add(&dev_info->list, &xhci->lpm_failed_devs);
+ } else {
+ xhci_ring_device(xhci, udev->slot_id);
+ }
+
+finish:
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return ret;
+}
+
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int ret;
+
+ ret = xhci_usb2_software_lpm_test(hcd, udev);
+ if (!ret)
+ xhci_dbg(xhci, "software LPM test succeed\n");
+
+ return 0;
+}
+
+#else
+
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ return 0;
+}
+
+#endif /* CONFIG_USB_SUSPEND */
+
/* Once a hub descriptor is fetched for a device, we need to update the xHC's
* internal data structures for the device.
*/
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8673f98..b24c4fc 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -272,6 +272,7 @@ struct xhci_op_regs {
*/
#define PORT_PLS_MASK (0xf << 5)
#define XDEV_U0 (0x0 << 5)
+#define XDEV_U2 (0x2 << 5)
#define XDEV_U3 (0x3 << 5)
#define XDEV_RESUME (0xf << 5)
/* true: port has power (see HCC_PPC) */
@@ -362,7 +363,11 @@ struct xhci_op_regs {
/* Bits 24:31 for port testing */
/* USB2 Protocol PORTSPMSC */
-#define PORT_RWE (1 << 0x3)
+#define PORT_L1S_MASK 7
+#define PORT_L1S_SUCCESS 1
+#define PORT_RWE (1 << 3)
+#define PORT_HIRD(p) (((p) & 0xf) << 4)
+#define PORT_L1DS(p) (((p) & 0xff) << 8)
/**
* struct xhci_intr_reg - Interrupt Register Set
@@ -1324,6 +1329,12 @@ struct s3_save {
u64 erst_dequeue;
};
+/* Use for lpm */
+struct dev_info {
+ u32 dev_id;
+ struct list_head list;
+};
+
struct xhci_bus_state {
unsigned long bus_suspended;
unsigned long next_statechange;
@@ -1387,6 +1398,8 @@ struct xhci_hcd {
struct xhci_erst erst;
/* Scratchpad */
struct xhci_scratchpad *scratchpad;
+ /* Store LPM test failed devices' information */
+ struct list_head lpm_failed_devs;
/* slot enabling and address device helpers */
struct completion addr_dev;
@@ -1663,6 +1676,7 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint **eps, unsigned int num_eps,
gfp_t mem_flags);
int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags);
int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);