Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Among the things new for this release
  are:

   - More support for the AM33xx platforms from TI
   - Tegra 124 support, and some updates to older tegra families as well
   - imx cleanups and updates across the board
   - A rename of Broadcom's Mobile platforms which were introduced as
     ARCH_BCM, and turned out to be too broad a name.  New name is
     ARCH_BCM_MOBILE.
   - A whole bunch of updates and fixes for integrator, making the
     platform code more modern and switches over to DT-only booting.
   - Support for two new Renesas shmobile chipsets.  Next up for them is
     more work on consolidation instead of introduction of new
     non-multiplatform SoCs, we're all looking forward to that!
   - Misc cleanups for older Samsung platforms, some Allwinner updates,
     etc"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
  ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
  ARM: bcm_defconfig: Run "make savedefconfig"
  ARM: bcm281xx: Add ARCH Timers to config
  rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
  ARM: vexpress: Enable platform-specific options in defconfig
  ARM: vexpress: Make defconfig work again
  ARM: sunxi: remove .init_time hooks
  ARM: imx: enable suspend for imx6sl
  ARM: imx: ensure dsm_request signal is not asserted when setting LPM
  ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
  ARM: imx6q: move low-power code out of clock driver
  ARM: imx: drop extern with function prototypes in common.h
  ARM: imx: reset core along with enable/disable operation
  ARM: imx: do not return from imx_cpu_die() call
  ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
  ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
  ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
  ARM: imx: replace imx6q_restart() with mxc_restart()
  ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
  ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
  ...

6 files changed, 71 insertions, 65 deletions

diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 3413380..8eb4799 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -8,6 +8,4 @@ obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
-ifdef CONFIG_COMMON_CLK
 obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o
-endif
diff --git a/drivers/cpufreq/integrator-cpufreq.c b/drivers/cpufreq/integrator-cpufreq.c
index f7c99df..3d79bca 100644
--- a/drivers/cpufreq/integrator-cpufreq.c
+++ b/drivers/cpufreq/integrator-cpufreq.c
@@ -15,18 +15,19 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst.h>
 
-static struct cpufreq_driver integrator_driver;
+static void __iomem *cm_base;
+/* The cpufreq driver only use the OSC register */
+#define INTEGRATOR_HDR_OSC_OFFSET       0x08
+#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
 
-#define CM_ID  	__io_address(INTEGRATOR_HDR_ID)
-#define CM_OSC	__io_address(INTEGRATOR_HDR_OSC)
-#define CM_STAT __io_address(INTEGRATOR_HDR_STAT)
-#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK)
+static struct cpufreq_driver integrator_driver;
 
 static const struct icst_params lclk_params = {
 	.ref		= 24000000,
@@ -100,7 +101,7 @@ static int integrator_set_target(struct cpufreq_policy *policy,
 	BUG_ON(cpu != smp_processor_id());
 
 	/* get current setting */
-	cm_osc = __raw_readl(CM_OSC);
+	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
 
 	if (machine_is_integrator()) {
 		vco.s = (cm_osc >> 8) & 7;
@@ -128,7 +129,7 @@ static int integrator_set_target(struct cpufreq_policy *policy,
 
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
-	cm_osc = __raw_readl(CM_OSC);
+	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
 
 	if (machine_is_integrator()) {
 		cm_osc &= 0xfffff800;
@@ -138,9 +139,9 @@ static int integrator_set_target(struct cpufreq_policy *policy,
 	}
 	cm_osc |= vco.v;
 
-	__raw_writel(0xa05f, CM_LOCK);
-	__raw_writel(cm_osc, CM_OSC);
-	__raw_writel(0, CM_LOCK);
+	__raw_writel(0xa05f, cm_base + INTEGRATOR_HDR_LOCK_OFFSET);
+	__raw_writel(cm_osc, cm_base + INTEGRATOR_HDR_OSC_OFFSET);
+	__raw_writel(0, cm_base + INTEGRATOR_HDR_LOCK_OFFSET);
 
 	/*
 	 * Restore the CPUs allowed mask.
@@ -165,7 +166,7 @@ static unsigned int integrator_get(unsigned int cpu)
 	BUG_ON(cpu != smp_processor_id());
 
 	/* detect memory etc. */
-	cm_osc = __raw_readl(CM_OSC);
+	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
 
 	if (machine_is_integrator()) {
 		vco.s = (cm_osc >> 8) & 7;
@@ -202,19 +203,43 @@ static struct cpufreq_driver integrator_driver = {
 	.name		= "integrator",
 };
 
-static int __init integrator_cpu_init(void)
+static int __init integrator_cpufreq_probe(struct platform_device *pdev)
 {
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res)
+		return -ENODEV;
+
+	cm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!cm_base)
+		return -ENODEV;
+
 	return cpufreq_register_driver(&integrator_driver);
 }
 
-static void __exit integrator_cpu_exit(void)
+static void __exit integrator_cpufreq_remove(struct platform_device *pdev)
 {
 	cpufreq_unregister_driver(&integrator_driver);
 }
 
+static const struct of_device_id integrator_cpufreq_match[] = {
+	{ .compatible = "arm,core-module-integrator"},
+	{ },
+};
+
+static struct platform_driver integrator_cpufreq_driver = {
+	.driver = {
+		.name = "integrator-cpufreq",
+		.owner = THIS_MODULE,
+		.of_match_table = integrator_cpufreq_match,
+	},
+	.remove = __exit_p(integrator_cpufreq_remove),
+};
+
+module_platform_driver_probe(integrator_cpufreq_driver,
+			     integrator_cpufreq_probe);
+
 MODULE_AUTHOR ("Russell M. King");
 MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs");
 MODULE_LICENSE ("GPL");
-
-module_init(integrator_cpu_init);
-module_exit(integrator_cpu_exit);
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 8e36603..d6f57d5 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -4,7 +4,7 @@
 
 config ARM_HIGHBANK_CPUIDLE
 	bool "CPU Idle Driver for Calxeda processors"
-	depends on ARCH_HIGHBANK
+	depends on ARM_PSCI
 	select ARM_CPU_SUSPEND
 	help
 	  Select this to enable cpuidle on Calxeda processors.
diff --git a/drivers/cpuidle/cpuidle-calxeda.c b/drivers/cpuidle/cpuidle-calxeda.c
index 3460584..3679563 100644
--- a/drivers/cpuidle/cpuidle-calxeda.c
+++ b/drivers/cpuidle/cpuidle-calxeda.c
@@ -21,53 +21,30 @@
  */
 
 #include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
 #include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
 #include <asm/cpuidle.h>
-#include <asm/proc-fns.h>
-#include <asm/smp_scu.h>
 #include <asm/suspend.h>
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-
-extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
-extern void __iomem *scu_base_addr;
-
-static noinline void calxeda_idle_restore(void)
-{
-	set_cr(get_cr() | CR_C);
-	set_auxcr(get_auxcr() | 0x40);
-	scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
-}
+#include <asm/psci.h>
 
 static int calxeda_idle_finish(unsigned long val)
 {
-	/* Already flushed cache, but do it again as the outer cache functions
-	 * dirty the cache with spinlocks */
-	flush_cache_all();
-
-	set_auxcr(get_auxcr() & ~0x40);
-	set_cr(get_cr() & ~CR_C);
-
-	scu_power_mode(scu_base_addr, SCU_PM_DORMANT);
-
-	cpu_do_idle();
-
-	/* Restore things if we didn't enter power-gating */
-	calxeda_idle_restore();
-	return 1;
+	const struct psci_power_state ps = {
+		.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+	};
+	return psci_ops.cpu_suspend(ps, __pa(cpu_resume));
 }
 
 static int calxeda_pwrdown_idle(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)
 {
-	highbank_set_cpu_jump(smp_processor_id(), cpu_resume);
+	cpu_pm_enter();
 	cpu_suspend(0, calxeda_idle_finish);
+	cpu_pm_exit();
+
 	return index;
 }
 
@@ -88,11 +65,17 @@ static struct cpuidle_driver calxeda_idle_driver = {
 	.state_count = 2,
 };
 
-static int __init calxeda_cpuidle_init(void)
+static int __init calxeda_cpuidle_probe(struct platform_device *pdev)
 {
-	if (!of_machine_is_compatible("calxeda,highbank"))
-		return -ENODEV;
-
 	return cpuidle_register(&calxeda_idle_driver, NULL);
 }
-module_init(calxeda_cpuidle_init);
+
+static struct platform_driver calxeda_cpuidle_plat_driver = {
+        .driver = {
+                .name = "cpuidle-calxeda",
+                .owner = THIS_MODULE,
+        },
+        .probe = calxeda_cpuidle_probe,
+};
+
+module_platform_driver(calxeda_cpuidle_plat_driver);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index f238cfd..56fe803 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -195,7 +195,7 @@ config SIRF_DMA
 
 config TI_EDMA
 	bool "TI EDMA support"
-	depends on ARCH_DAVINCI || ARCH_OMAP
+	depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	select TI_PRIV_EDMA
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index be3429e..f90101b 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -64,10 +64,10 @@ static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
 
 	dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
 
-	clk_enable(usb_clk);
+	clk_prepare_enable(usb_clk);
 	mdelay(2);			/* let the bus clock stabilise */
 
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 
 	if (info != NULL) {
 		info->hcd	= hcd;
@@ -92,8 +92,8 @@ static void s3c2410_stop_hc(struct platform_device *dev)
 			(info->enable_oc)(info, 0);
 	}
 
-	clk_disable(clk);
-	clk_disable(usb_clk);
+	clk_disable_unprepare(clk);
+	clk_disable_unprepare(usb_clk);
 }
 
 /* ohci_s3c2410_hub_status_data