usb: gadget: renesas_usbhs: add mod_host support

This is mod_host prototype support for renesas_usbhs driver.
It doesn't support USB-Hub, and USB-DMAC for now.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

5 files changed, 1349 insertions, 2 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 3e5b235..060e0e2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -515,6 +515,19 @@ config USB_R8A66597_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called r8a66597-hcd.
 
+config USB_RENESAS_USBHS_HCD
+	tristate "Renesas USBHS HCD support"
+	depends on USB
+	depends on USB_RENESAS_USBHS
+	help
+	  The Renesas USBHS is a USB 2.0 host and peripheral controller.
+
+	  Enable this option if your board has this chip, and you want
+	  to use it as a host controller.  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called renesas-usbhs.
+
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
diff --git a/drivers/usb/renesas_usbhs/Makefile b/drivers/usb/renesas_usbhs/Makefile
index ce08345..e44984d 100644
--- a/drivers/usb/renesas_usbhs/Makefile
+++ b/drivers/usb/renesas_usbhs/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs.o
 
 renesas_usbhs-y			:= common.o mod.o pipe.o fifo.o
 
+renesas_usbhs-$(CONFIG_USB_RENESAS_USBHS_HCD)	+= mod_host.o
 renesas_usbhs-$(CONFIG_USB_RENESAS_USBHS_UDC)	+= mod_gadget.o
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index 993c2ca..2d3b09d 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -140,10 +140,14 @@ int usbhs_mod_probe(struct usbhs_priv *priv)
 	/*
 	 * install host/gadget driver
 	 */
-	ret = usbhs_mod_gadget_probe(priv);
+	ret = usbhs_mod_host_probe(priv);
 	if (ret < 0)
 		return ret;
 
+	ret = usbhs_mod_gadget_probe(priv);
+	if (ret < 0)
+		goto mod_init_host_err;
+
 	/* irq settings */
 	ret = request_irq(priv->irq, usbhs_interrupt,
 			  0, dev_name(dev), priv);
@@ -156,12 +160,15 @@ int usbhs_mod_probe(struct usbhs_priv *priv)
 
 mod_init_gadget_err:
 	usbhs_mod_gadget_remove(priv);
+mod_init_host_err:
+	usbhs_mod_host_remove(priv);
 
 	return ret;
 }
 
 void usbhs_mod_remove(struct usbhs_priv *priv)
 {
+	usbhs_mod_host_remove(priv);
 	usbhs_mod_gadget_remove(priv);
 	free_irq(priv->irq, priv);
 }
diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h
index df4b61d..1f28ed2 100644
--- a/drivers/usb/renesas_usbhs/mod.h
+++ b/drivers/usb/renesas_usbhs/mod.h
@@ -139,8 +139,21 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod);
 	})
 
 /*
- * gadget control
+ * host / gadget control
  */
+#ifdef CONFIG_USB_RENESAS_USBHS_HCD
+extern int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv);
+extern int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv);
+#else
+static inline int usbhs_mod_host_probe(struct usbhs_priv *priv)
+{
+	return 0;
+}
+static inline void usbhs_mod_host_remove(struct usbhs_priv *priv)
+{
+}
+#endif
+
 #ifdef CONFIG_USB_RENESAS_USBHS_UDC
 extern int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv);
 extern void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv);
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
new file mode 100644
index 0000000..1c60331
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -0,0 +1,1313 @@
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "common.h"
+
+/*
+ *** HARDWARE LIMITATION ***
+ *
+ * 1) renesas_usbhs has a limited number of controllable devices.
+ *    it can control only 9 devices in generally.
+ *	see DEVADDn / DCPMAXP / PIPEMAXP.
+ *
+ * 2) renesas_usbhs pipe number is limited.
+ *    the pipe will be re-used for each devices.
+ *    so, software should control DATA0/1 sequence of each devices.
+ */
+
+
+/*
+ *		image of mod_host
+ *
+ * +--------+
+ * | udev 0 | --> it is used when set address
+ * +--------+
+ *
+ * +--------+					pipes are reused for each uep.
+ * | udev 1 |-+- [uep 0 (dcp) ] --+		pipe will be switched when
+ * +--------+ |			  |		target device was changed
+ *	      +- [uep 1 (bulk)]	--|---+		   +--------------+
+ *	      |			  +--------------> | pipe0 (dcp)  |
+ *	      +- [uep 2 (bulk)]	--|---|---+	   +--------------+
+ *				  |   |	  |	   | pipe1 (isoc) |
+ * +--------+			  |   |	  |	   +--------------+
+ * | udev 2 |-+- [uep 0 (dcp) ]	--+   +-- |------> | pipe2 (bulk) |
+ * +--------+ |			  |   |	  |	   +--------------+
+ *	      +- [uep 1 (int) ]	--|-+ |	  +------> | pipe3 (bulk) |
+ *				  | | |	  |	   +--------------+
+ * +--------+			  | +-|---|------> | pipe4 (int)  |
+ * | udev 3 |-+- [uep 0 (dcp) ]	--+   |	  |	   +--------------+
+ * +--------+ |			      |	  |	   | ....	  |
+ *	      +- [uep 1 (bulk)]	------+	  |	   | ....	  |
+ *	      |				  |
+ *	      +- [uep 2 (bulk)]-----------+
+ */
+
+
+/*
+ *		struct
+ */
+struct usbhsh_pipe_info {
+	unsigned int		usr_cnt; /* see usbhsh_endpoint_alloc() */
+};
+
+struct usbhsh_request {
+	struct urb		*urb;
+	struct usbhs_pkt	pkt;
+	struct list_head	ureq_link; /* see hpriv :: ureq_link_xxx */
+};
+
+struct usbhsh_device {
+	struct usb_device	*usbv;
+	struct list_head	ep_list_head; /* list of usbhsh_ep */
+};
+
+struct usbhsh_ep {
+	struct usbhs_pipe	*pipe;
+	struct usbhsh_device	*udev;   /* attached udev */
+	struct list_head	ep_list; /* list to usbhsh_device */
+
+	int maxp;
+};
+
+#define USBHSH_DEVICE_MAX	10 /* see DEVADDn / DCPMAXP / PIPEMAXP */
+#define USBHSH_PORT_MAX		 7 /* see DEVADDn :: HUBPORT */
+struct usbhsh_hpriv {
+	struct usbhs_mod	mod;
+	struct usbhs_pipe	*dcp;
+
+	struct usbhsh_device	udev[USBHSH_DEVICE_MAX];
+
+	struct usbhsh_pipe_info	*pipe_info;
+	int			 pipe_size;
+
+	u32	port_stat;	/* USB_PORT_STAT_xxx */
+
+	struct completion	*done;
+
+	/* see usbhsh_req_alloc/free */
+	struct list_head	ureq_link_active;
+	struct list_head	ureq_link_free;
+};
+
+
+static const char usbhsh_hcd_name[] = "renesas_usbhs host";
+
+/*
+ *		macro
+ */
+#define usbhsh_priv_to_hpriv(priv) \
+	container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod)
+
+#define __usbhsh_for_each_hpipe(start, pos, h, i)	\
+	for (i = start, pos = (h)->hpipe + i;		\
+	     i < (h)->hpipe_size;			\
+	     i++, pos = (h)->hpipe + i)
+
+#define usbhsh_for_each_hpipe(pos, hpriv, i)	\
+	__usbhsh_for_each_hpipe(1, pos, hpriv, i)
+
+#define usbhsh_for_each_hpipe_with_dcp(pos, hpriv, i)	\
+	__usbhsh_for_each_hpipe(0, pos, hpriv, i)
+
+#define __usbhsh_for_each_udev(start, pos, h, i)	\
+	for (i = start, pos = (h)->udev + i;		\
+	     i < USBHSH_DEVICE_MAX;			\
+	     i++, pos = (h)->udev + i)
+
+#define usbhsh_for_each_udev(pos, hpriv, i)	\
+	__usbhsh_for_each_udev(1, pos, hpriv, i)
+
+#define usbhsh_for_each_udev_with_dev0(pos, hpriv, i)	\
+	__usbhsh_for_each_udev(0, pos, hpriv, i)
+
+#define usbhsh_hcd_to_hpriv(h)	(struct usbhsh_hpriv *)((h)->hcd_priv)
+#define usbhsh_hcd_to_dev(h)	((h)->self.controller)
+
+#define usbhsh_hpriv_to_priv(h)	((h)->mod.priv)
+#define usbhsh_hpriv_to_dcp(h)	((h)->dcp)
+#define usbhsh_hpriv_to_hcd(h)	\
+	container_of((void *)h, struct usb_hcd, hcd_priv)
+
+#define usbhsh_ep_to_uep(u)	((u)->hcpriv)
+#define usbhsh_uep_to_pipe(u)	((u)->pipe)
+#define usbhsh_uep_to_udev(u)	((u)->udev)
+#define usbhsh_urb_to_ureq(u)	((u)->hcpriv)
+#define usbhsh_urb_to_usbv(u)	((u)->dev)
+
+#define usbhsh_usbv_to_udev(d)	dev_get_drvdata(&(d)->dev)
+
+#define usbhsh_udev_to_usbv(h)	((h)->usbv)
+
+#define usbhsh_pipe_info(p)	((p)->mod_private)
+
+#define usbhsh_device_number(h, d)	((int)((d) - (h)->udev))
+#define usbhsh_device_nth(h, d)		((h)->udev + d)
+#define usbhsh_device0(h)		usbhsh_device_nth(h, 0)
+
+#define usbhsh_port_stat_init(h)	((h)->port_stat = 0)
+#define usbhsh_port_stat_set(h, s)	((h)->port_stat |= (s))
+#define usbhsh_port_stat_clear(h, s)	((h)->port_stat &= ~(s))
+#define usbhsh_port_stat_get(h)		((h)->port_stat)
+
+#define usbhsh_pkt_to_req(p)	\
+	container_of((void *)p, struct usbhsh_request, pkt)
+
+/*
+ *		req alloc/free
+ */
+static void usbhsh_req_list_init(struct usbhsh_hpriv *hpriv)
+{
+	INIT_LIST_HEAD(&hpriv->ureq_link_active);
+	INIT_LIST_HEAD(&hpriv->ureq_link_free);
+}
+
+static void usbhsh_req_list_quit(struct usbhsh_hpriv *hpriv)
+{
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usbhsh_request *ureq, *next;
+
+	/* kfree all active ureq */
+	list_for_each_entry_safe(ureq, next,
+				 &hpriv->ureq_link_active,
+				 ureq_link) {
+		dev_err(dev, "active ureq (%p) is force freed\n", ureq);
+		kfree(ureq);
+	}
+
+	/* kfree all free ureq */
+	list_for_each_entry_safe(ureq, next, &hpriv->ureq_link_free, ureq_link)
+		kfree(ureq);
+}
+
+static struct usbhsh_request *usbhsh_req_alloc(struct usbhsh_hpriv *hpriv,
+					       struct urb *urb,
+					       gfp_t mem_flags)
+{
+	struct usbhsh_request *ureq;
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	if (list_empty(&hpriv->ureq_link_free)) {
+		/*
+		 * create new one if there is no free ureq
+		 */
+		ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags);
+		if (ureq)
+			INIT_LIST_HEAD(&ureq->ureq_link);
+	} else {
+		/*
+		 * reuse "free" ureq if exist
+		 */
+		ureq = list_entry(hpriv->ureq_link_free.next,
+				  struct usbhsh_request,
+				  ureq_link);
+		if (ureq)
+			list_del_init(&ureq->ureq_link);
+	}
+
+	if (!ureq) {
+		dev_err(dev, "ureq alloc fail\n");
+		return NULL;
+	}
+
+	usbhs_pkt_init(&ureq->pkt);
+
+	/*
+	 * push it to "active" list
+	 */
+	list_add_tail(&ureq->ureq_link, &hpriv->ureq_link_active);
+	ureq->urb = urb;
+
+	return ureq;
+}
+
+static void usbhsh_req_free(struct usbhsh_hpriv *hpriv,
+			    struct usbhsh_request *ureq)
+{
+	struct usbhs_pkt *pkt = &ureq->pkt;
+
+	usbhs_pkt_init(pkt);
+
+	/*
+	 * removed from "active" list,
+	 * and push it to "free" list
+	 */
+	ureq->urb = NULL;
+	list_del_init(&ureq->ureq_link);
+	list_add_tail(&ureq->ureq_link, &hpriv->ureq_link_free);
+}
+
+/*
+ *		device control
+ */
+
+static int usbhsh_device_has_endpoint(struct usbhsh_device *udev)
+{
+	return !list_empty(&udev->ep_list_head);
+}
+
+static struct usbhsh_device *usbhsh_device_alloc(struct usbhsh_hpriv *hpriv,
+						 struct urb *urb)
+{
+	struct usbhsh_device *udev = NULL;
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	int i;
+
+	/*
+	 * device 0
+	 */
+	if (0 == usb_pipedevice(urb->pipe)) {
+		udev = usbhsh_device0(hpriv);
+		goto usbhsh_device_find;
+	}
+
+	/*
+	 * find unused device
+	 */
+	usbhsh_for_each_udev(udev, hpriv, i) {
+		if (usbhsh_udev_to_usbv(udev))
+			continue;
+		goto usbhsh_device_find;
+	}
+
+	dev_err(dev, "no free usbhsh_device\n");
+
+	return NULL;
+
+usbhsh_device_find:
+	if (usbhsh_device_has_endpoint(udev))
+		dev_warn(dev, "udev have old endpoint\n");
+
+	/* uep will be attached */
+	INIT_LIST_HEAD(&udev->ep_list_head);
+
+	/*
+	 * usbhsh_usbv_to_udev()
+	 * usbhsh_udev_to_usbv()
+	 * will be enable
+	 */
+	dev_set_drvdata(&usbv->dev, udev);
+	udev->usbv = usbv;
+
+	/* set device config */
+	usbhs_set_device_speed(priv,
+			       usbhsh_device_number(hpriv, udev),
+			       usbhsh_device_number(hpriv, udev),
+			       0, /* FIXME no parent */
+			       usbv->speed);
+
+	dev_dbg(dev, "%s [%d](%p)\n", __func__,
+		usbhsh_device_number(hpriv, udev), udev);
+
+	return udev;
+}
+
+static void usbhsh_device_free(struct usbhsh_hpriv *hpriv,
+			       struct usbhsh_device *udev)
+{
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
+
+	dev_dbg(dev, "%s [%d](%p)\n", __func__,
+		usbhsh_device_number(hpriv, udev), udev);
+
+	if (usbhsh_device_has_endpoint(udev))
+		dev_warn(dev, "udev still have endpoint\n");
+
+	/*
+	 * usbhsh_usbv_to_udev()
+	 * usbhsh_udev_to_usbv()
+	 * will be disable
+	 */
+	dev_set_drvdata(&usbv->dev, NULL);
+	udev->usbv = NULL;
+}
+
+/*
+ *		end-point control
+ */
+struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv,
+					struct usbhsh_device *udev,
+					struct usb_host_endpoint *ep,
+					gfp_t mem_flags)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct usbhsh_ep *uep;
+	struct usbhsh_pipe_info *info;
+	struct usbhs_pipe *pipe, *best_pipe;
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usb_endpoint_descriptor *desc = &ep->desc;
+	int type, i;
+	unsigned int min_usr;
+
+	uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
+	if (!uep) {
+		dev_err(dev, "usbhsh_ep alloc fail\n");
+		return NULL;
+	}
+	type = usb_endpoint_type(desc);
+
+	/*
+	 * find best pipe for endpoint
+	 * see
+	 *	HARDWARE LIMITATION
+	 */
+	min_usr = ~0;
+	best_pipe = NULL;
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		if (!usbhs_pipe_type_is(pipe, type))
+			continue;
+
+		info = usbhsh_pipe_info(pipe);
+
+		if (min_usr > info->usr_cnt) {
+			min_usr		= info->usr_cnt;
+			best_pipe	= pipe;
+		}
+	}
+
+	if (unlikely(!best_pipe)) {
+		dev_err(dev, "couldn't find best pipe\n");
+		kfree(uep);
+		return NULL;
+	}
+
+	/*
+	 * init uep
+	 */
+	uep->pipe	= best_pipe;
+	uep->maxp	= usb_endpoint_maxp(desc);
+	usbhsh_uep_to_udev(uep)	= udev;
+	usbhsh_ep_to_uep(ep)	= uep;
+
+	/*
+	 * update pipe user count
+	 */
+	info = usbhsh_pipe_info(best_pipe);
+	info->usr_cnt++;
+
+	/* init this endpoint, and attach it to udev */
+	INIT_LIST_HEAD(&uep->ep_list);
+	list_add_tail(&uep->ep_list, &udev->ep_list_head);
+
+	/*
+	 * usbhs_pipe_config_update() should be called after
+	 * usbhs_device_config()
+	 * see
+	 *  DCPMAXP/PIPEMAXP
+	 */
+	usbhs_pipe_config_update(uep->pipe,
+				 usbhsh_device_number(hpriv, udev),
+				 usb_endpoint_num(desc),
+				 uep->maxp);
+
+	dev_dbg(dev, "%s [%d-%s](%p)\n", __func__,
+		usbhsh_device_number(hpriv, udev),
+		usbhs_pipe_name(pipe), uep);
+
+	return uep;
+}
+
+void usbhsh_endpoint_free(struct usbhsh_hpriv *hpriv,
+			  struct usb_host_endpoint *ep)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
+	struct usbhsh_device *udev = usbhsh_uep_to_udev(uep);
+	struct usbhsh_pipe_info *info;
+
+	if (!uep)
+		return;
+
+	dev_dbg(dev, "%s [%d-%s](%p)\n", __func__,
+		usbhsh_device_number(hpriv, udev),
+		usbhs_pipe_name(uep->pipe), uep);
+
+	info = usbhsh_pipe_info(uep->pipe);
+	info->usr_cnt--;
+
+	/* remove this endpoint from udev */
+	list_del_init(&uep->ep_list);
+
+	usbhsh_uep_to_udev(uep) = NULL;
+	usbhsh_ep_to_uep(ep) = NULL;
+
+	kfree(uep);
+}
+
+/*
+ *		queue push/pop
+ */
+static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
+{
+	struct usbhsh_request *ureq = usbhsh_pkt_to_req(pkt);
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct urb *urb = ureq->urb;
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	if (!urb) {
+		dev_warn(dev, "pkt doesn't have urb\n");
+		return;
+	}
+
+	urb->actual_length = pkt->actual;
+	usbhsh_req_free(hpriv, ureq);
+	usbhsh_urb_to_ureq(urb) = NULL;
+
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	usb_hcd_giveback_urb(hcd, urb, 0);
+}
+
+static int usbhsh_queue_push(struct usb_hcd *hcd,
+			     struct usbhs_pipe *pipe,
+			     struct urb *urb)
+{
+	struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);
+	struct usbhs_pkt *pkt = &ureq->pkt;
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	void *buf;
+	int len;
+
+	if (usb_pipeisoc(urb->pipe)) {
+		dev_err(dev, "pipe iso is not supported now\n");
+		return -EIO;
+	}
+
+	if (usb_pipein(urb->pipe))
+		pipe->handler = &usbhs_fifo_pio_pop_handler;
+	else
+		pipe->handler = &usbhs_fifo_pio_push_handler;
+
+	buf = (void *)(urb->transfer_buffer + urb->actual_length);
+	len = urb->transfer_buffer_length - urb->actual_length;
+
+	dev_dbg(dev, "%s\n", __func__);
+	usbhs_pkt_push(pipe, pkt, usbhsh_queue_done,
+		       buf, len, (urb->transfer_flags & URB_ZERO_PACKET));
+	usbhs_pkt_start(pipe);
+
+	return 0;
+}
+
+/*
+ *		DCP setup stage
+ */
+static int usbhsh_is_request_address(struct urb *urb)
+{
+	struct usb_ctrlrequest *cmd;
+
+	cmd = (struct usb_ctrlrequest *)urb->setup_packet;
+
+	if ((DeviceOutRequest    == cmd->bRequestType << 8) &&
+	    (USB_REQ_SET_ADDRESS == cmd->bRequest))
+		return 1;
+	else
+		return 0;
+}
+
+static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv,
+					   struct urb *urb,
+					   struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usb_ctrlrequest req;
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	/*
+	 * wait setup packet ACK
+	 * see
+	 *	usbhsh_irq_setup_ack()
+	 *	usbhsh_irq_setup_err()
+	 */
+	DECLARE_COMPLETION(done);
+	hpriv->done = &done;
+
+	/* copy original request */
+	memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));
+
+	/*
+	 * renesas_usbhs can not use original usb address.
+	 * see HARDWARE LIMITATION.
+	 * modify usb address here.
+	 */
+	if (usbhsh_is_request_address(urb)) {
+		/* FIXME */
+		req.wValue = 1;
+		dev_dbg(dev, "create new address - %d\n", req.wValue);
+	}
+
+	/* set request */
+	usbhs_usbreq_set_val(priv, &req);
+
+	/*
+	 * wait setup packet ACK
+	 */
+	wait_for_completion(&done);
+	hpriv->done = NULL;
+
+	dev_dbg(dev, "%s done\n", __func__);
+}
+
+/*
+ *		DCP data stage
+ */
+static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv,
+					  struct usbhs_pkt *pkt)
+{
+	struct usbhsh_request *ureq = usbhsh_pkt_to_req(pkt);
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct urb *urb = ureq->urb;
+
+	/* this ureq was connected to urb when usbhsh_urb_enqueue()  */
+
+	usbhsh_req_free(hpriv, ureq);
+	usbhsh_urb_to_ureq(urb) = NULL;
+}
+
+static void usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv,
+					  struct urb *urb,
+					  struct usbhs_pipe *pipe)
+{
+	struct usbhsh_request *ureq;
+	struct usbhs_pkt *pkt;
+
+	/*
+	 * FIXME
+	 *
+	 * data stage uses ureq which is connected to urb
+	 * see usbhsh_urb_enqueue() :: alloc new request.
+	 * it will be freed in usbhsh_data_stage_packet_done()
+	 */
+	ureq	= usbhsh_urb_to_ureq(urb);
+	pkt	= &ureq->pkt;
+
+	if (usb_pipein(urb->pipe))
+		pipe->handler = &usbhs_dcp_data_stage_in_handler;
+	else
+		pipe->handler = &usbhs_dcp_data_stage_out_handler;
+
+	usbhs_pkt_push(pipe, pkt,
+		       usbhsh_data_stage_packet_done,
+		       urb->transfer_buffer,
+		       urb->transfer_buffer_length,
+		       (urb->transfer_flags & URB_ZERO_PACKET));
+}
+
+/*
+ *		DCP status stage
+ */
+static void usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv,
+					    struct urb *urb,
+					    struct usbhs_pipe *pipe)
+{
+	struct usbhsh_request *ureq;
+	struct usbhs_pkt *pkt;
+
+	/*
+	 * FIXME
+	 *
+	 * status stage uses allocated ureq.
+	 * it will be freed on usbhsh_queue_done()
+	 */
+	ureq	= usbhsh_req_alloc(hpriv, urb, GFP_KERNEL);
+	pkt	= &ureq->pkt;
+
+	if (usb_pipein(urb->pipe))
+		pipe->handler = &usbhs_dcp_status_stage_in_handler;
+	else
+		pipe->handler = &usbhs_dcp_status_stage_out_handler;
+
+	usbhs_pkt_push(pipe, pkt,
+		       usbhsh_queue_done,
+		       NULL,
+		       urb->transfer_buffer_length,
+		       0);
+}
+
+static int usbhsh_dcp_queue_push(struct usb_hcd *hcd,
+				 struct usbhsh_hpriv *hpriv,
+				 struct usbhs_pipe *pipe,
+				 struct urb *urb)
+{
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	/*
+	 * setup stage
+	 *
+	 * usbhsh_send_setup_stage_packet() wait SACK/SIGN
+	 */
+	usbhsh_setup_stage_packet_push(hpriv, urb, pipe);
+
+	/*
+	 * data stage
+	 *
+	 * It is pushed only when urb has buffer.
+	 */
+	if (urb->transfer_buffer_length)
+		usbhsh_data_stage_packet_push(hpriv, urb, pipe);
+
+	/*
+	 * status stage
+	 */
+	usbhsh_status_stage_packet_push(hpriv, urb, pipe);
+
+	/*
+	 * start pushed packets
+	 */
+	usbhs_pkt_start(pipe);
+
+	return 0;
+}
+
+/*
+ *		dma map functions
+ */
+static int usbhsh_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
+{
+	return 0;
+}
+
+/*
+ *		for hc_driver
+ */
+static int usbhsh_host_start(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+static void usbhsh_host_stop(struct usb_hcd *hcd)
+{
+}
+
+static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
+			      struct urb *urb,
+			      gfp_t mem_flags)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
+	struct usb_host_endpoint *ep = urb->ep;
+	struct usbhsh_request *ureq;
+	struct usbhsh_device *udev, *new_udev = NULL;
+	struct usbhs_pipe *pipe;
+	struct usbhsh_ep *uep;
+
+	int ret;
+
+	dev_dbg(dev, "%s (%s)\n",
+		__func__, usb_pipein(urb->pipe) ? "in" : "out");
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto usbhsh_urb_enqueue_error_not_linked;
+
+	/*
+	 * get udev
+	 */
+	udev = usbhsh_usbv_to_udev(usbv);
+	if (!udev) {
+		new_udev = usbhsh_device_alloc(hpriv, urb);
+		if (!new_udev)
+			goto usbhsh_urb_enqueue_error_not_linked;
+
+		udev = new_udev;
+	}
+
+	/*
+	 * get uep
+	 */
+	uep = usbhsh_ep_to_uep(ep);
+	if (!uep) {
+		uep = usbhsh_endpoint_alloc(hpriv, udev, ep, mem_flags);
+		if (!uep)
+			goto usbhsh_urb_enqueue_error_free_device;
+	}
+	pipe = usbhsh_uep_to_pipe(uep);
+
+	/*
+	 * alloc new request
+	 */
+	ureq = usbhsh_req_alloc(hpriv, urb, mem_flags);
+	if (unlikely(!ureq)) {
+		ret = -ENOMEM;
+		goto usbhsh_urb_enqueue_error_free_endpoint;
+	}
+	usbhsh_urb_to_ureq(urb) = ureq;
+
+	/*
+	 * push packet
+	 */
+	if (usb_pipecontrol(urb->pipe))
+		usbhsh_dcp_queue_push(hcd, hpriv, pipe, urb);
+	else
+		usbhsh_queue_push(hcd, pipe, urb);
+
+	return 0;
+
+usbhsh_urb_enqueue_error_free_endpoint:
+	usbhsh_endpoint_free(hpriv, ep);
+usbhsh_urb_enqueue_error_free_device:
+	if (new_udev)
+		usbhsh_device_free(hpriv, new_udev);
+usbhsh_urb_enqueue_error_not_linked:
+
+	dev_dbg(dev, "%s error\n", __func__);
+
+	return ret;
+}
+
+static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);
+
+	if (ureq) {
+		usbhsh_req_free(hpriv, ureq);
+		usbhsh_urb_to_ureq(urb) = NULL;
+	}
+
+	return 0;
+}
+
+static void usbhsh_endpoint_disable(struct usb_hcd *hcd,
+				    struct usb_host_endpoint *ep)
+{
+	struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
+	struct usbhsh_device *udev;
+	struct usbhsh_hpriv *hpriv;
+
+	/*
+	 * this function might be called manytimes by same hcd/ep
+	 * in-endpoitn == out-endpoint if ep == dcp.
+	 */
+	if (!uep)
+		return;
+
+	udev	= usbhsh_uep_to_udev(uep);
+	hpriv	= usbhsh_hcd_to_hpriv(hcd);
+
+	usbhsh_endpoint_free(hpriv, ep);
+	ep->hcpriv = NULL;
+
+	/*
+	 * if there is no endpoint,
+	 * free device
+	 */
+	if (!usbhsh_device_has_endpoint(udev))
+		usbhsh_device_free(hpriv, udev);
+}
+
+static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int roothub_id = 1; /* only 1 root hub */
+
+	/*
+	 * does port stat was changed ?
+	 * check USB_PORT_STAT_C_xxx << 16
+	 */
+	if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000)
+		*buf = (1 << roothub_id);
+	else
+		*buf = 0;
+
+	dev_dbg(dev, "%s (%02x)\n", __func__, *buf);
+
+	return !!(*buf);
+}
+
+static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv,
+				    u16 typeReq, u16 wValue,
+				    u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	switch (wValue) {
+	case C_HUB_OVER_CURRENT:
+	case C_HUB_LOCAL_POWER:
+		dev_dbg(dev, "%s :: C_HUB_xx\n", __func__);
+		return 0;
+	}
+
+	return -EPIPE;
+}
+
+static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv,
+				     u16 typeReq, u16 wValue,
+				     u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int enable = (typeReq == SetPortFeature);
+	int speed, i, timeout = 128;
+	int roothub_id = 1; /* only 1 root hub */
+
+	/* common error */
+	if (wIndex > roothub_id || wLength != 0)
+		return -EPIPE;
+
+	/* check wValue */
+	switch (wValue) {
+	case USB_PORT_FEAT_POWER:
+		usbhs_vbus_ctrl(priv, enable);
+		dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__);
+		break;
+
+	case USB_PORT_FEAT_ENABLE:
+	case USB_PORT_FEAT_SUSPEND:
+	case USB_PORT_FEAT_C_ENABLE:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case USB_PORT_FEAT_C_CONNECTION:
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+	case USB_PORT_FEAT_C_RESET:
+		dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__);
+		break;
+
+	case USB_PORT_FEAT_RESET:
+		if (!enable)
+			break;
+
+		usbhsh_port_stat_clear(hpriv,
+				       USB_PORT_STAT_HIGH_SPEED |
+				       USB_PORT_STAT_LOW_SPEED);
+
+		usbhs_bus_send_reset(priv);
+		msleep(20);
+		usbhs_bus_send_sof_enable(priv);
+
+		for (i = 0; i < timeout ; i++) {
+			switch (usbhs_bus_get_speed(priv)) {
+			case USB_SPEED_LOW:
+				speed = USB_PORT_STAT_LOW_SPEED;
+				goto got_usb_bus_speed;
+			case USB_SPEED_HIGH:
+				speed = USB_PORT_STAT_HIGH_SPEED;
+				goto got_usb_bus_speed;
+			case USB_SPEED_FULL:
+				speed = 0;
+				goto got_usb_bus_speed;
+			}
+
+			msleep(20);
+		}
+		return -EPIPE;
+
+got_usb_bus_speed:
+		usbhsh_port_stat_set(hpriv, speed);
+		usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE);
+
+		dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n",
+			__func__, speed);
+
+		/* status change is not needed */
+		return 0;
+
+	default:
+		return -EPIPE;
+	}
+
+	/* set/clear status */
+	if (enable)
+		usbhsh_port_stat_set(hpriv, (1 << wValue));
+	else
+		usbhsh_port_stat_clear(hpriv, (1 << wValue));
+
+	return 0;
+}
+
+static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv,
+				   u16 typeReq, u16 wValue,
+				   u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int roothub_id = 1; /* only 1 root hub */
+
+	switch (typeReq) {
+	case GetHubStatus:
+		dev_dbg(dev, "%s :: GetHubStatus\n", __func__);
+
+		*buf = 0x00;
+		break;
+
+	case GetPortStatus:
+		if (wIndex != roothub_id)
+			return -EPIPE;
+
+		dev_dbg(dev, "%s :: GetPortStatus\n", __func__);
+		*(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv));
+		break;
+
+	case GetHubDescriptor:
+		desc->bDescriptorType		= 0x29;
+		desc->bHubContrCurrent		= 0;
+		desc->bNbrPorts			= roothub_id;
+		desc->bDescLength		= 9;
+		desc->bPwrOn2PwrGood		= 0;
+		desc->wHubCharacteristics	= cpu_to_le16(0x0011);
+		desc->u.hs.DeviceRemovable[0]	= (roothub_id << 1);
+		desc->u.hs.DeviceRemovable[1]	= ~0;
+		dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__);
+		break;
+	}
+
+	return 0;
+}
+
+static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			      u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret = -EPIPE;
+
+	switch (typeReq) {
+
+	/* Hub Feature */
+	case ClearHubFeature:
+	case SetHubFeature:
+		ret = __usbhsh_hub_hub_feature(hpriv, typeReq,
+					       wValue, wIndex, buf, wLength);
+		break;
+
+	/* Port Feature */
+	case SetPortFeature:
+	case ClearPortFeature:
+		ret = __usbhsh_hub_port_feature(hpriv, typeReq,
+						wValue, wIndex, buf, wLength);
+		break;
+
+	/* Get status */
+	case GetHubStatus:
+	case GetPortStatus:
+	case GetHubDescriptor:
+		ret = __usbhsh_hub_get_status(hpriv, typeReq,
+					      wValue, wIndex, buf, wLength);
+		break;
+	}
+
+	dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n",
+		typeReq, ret, usbhsh_port_stat_get(hpriv));
+
+	return ret;
+}
+
+static struct hc_driver usbhsh_driver = {
+	.description =		usbhsh_hcd_name,
+	.hcd_priv_size =	sizeof(struct usbhsh_hpriv),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.flags =		HCD_USB2,
+
+	.start =		usbhsh_host_start,
+	.stop =			usbhsh_host_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		usbhsh_urb_enqueue,
+	.urb_dequeue =		usbhsh_urb_dequeue,
+	.endpoint_disable =	usbhsh_endpoint_disable,
+
+	/*
+	 * root hub
+	 */
+	.hub_status_data =	usbhsh_hub_status_data,
+	.hub_control =		usbhsh_hub_control,
+};
+
+/*
+ *		interrupt functions
+ */
+static int usbhsh_irq_attch(struct usbhs_priv *priv,
+			    struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "device attached\n");
+
+	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION);
+	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
+
+	return 0;
+}
+
+static int usbhsh_irq_dtch(struct usbhs_priv *priv,
+			   struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "device detached\n");
+
+	usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION);
+	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
+
+	return 0;
+}
+
+static int usbhsh_irq_setup_ack(struct usbhs_priv *priv,
+				struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "setup packet OK\n");
+
+	if (unlikely(!hpriv->done))
+		dev_err(dev, "setup ack happen without necessary data\n");
+	else
+		complete(hpriv->done); /* see usbhsh_urb_enqueue() */
+
+	return 0;
+}
+
+static int usbhsh_irq_setup_err(struct usbhs_priv *priv,
+				struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "setup packet Err\n");
+
+	if (unlikely(!hpriv->done))
+		dev_err(dev, "setup err happen without necessary data\n");
+	else
+		complete(hpriv->done); /* see usbhsh_urb_enqueue() */
+
+	return 0;
+}
+
+/*
+ *		module start/stop
+ */
+static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usbhsh_pipe_info *pipe_info = hpriv->pipe_info;
+	struct usbhs_pipe *pipe;
+	u32 *pipe_type = usbhs_get_dparam(priv, pipe_type);
+	int pipe_size = usbhs_get_dparam(priv, pipe_size);
+	int old_type, dir_in, i;
+
+	/* init all pipe */
+	old_type = USB_ENDPOINT_XFER_CONTROL;
+	for (i = 0; i < pipe_size; i++) {
+		pipe_info[i].usr_cnt	= 0;
+
+		/*
+		 * data "output" will be finished as soon as possible,
+		 * but there is no guaranty at data "input" case.
+		 *
+		 * "input" needs "standby" pipe.
+		 * So, "input" direction pipe > "output" direction pipe
+		 * is good idea.
+		 *
+		 * 1st USB_ENDPOINT_XFER_xxx will be output direction,
+		 * and the other will be input direction here.
+		 *
+		 * ex)
+		 * ...
+		 * USB_ENDPOINT_XFER_ISOC -> dir out
+		 * USB_ENDPOINT_XFER_ISOC -> dir in
+		 * USB_ENDPOINT_XFER_BULK -> dir out
+		 * USB_ENDPOINT_XFER_BULK -> dir in
+		 * USB_ENDPOINT_XFER_BULK -> dir in
+		 * ...
+		 */
+		dir_in = (pipe_type[i] == old_type);
+		old_type = pipe_type[i];
+
+		if (USB_ENDPOINT_XFER_CONTROL == pipe_type[i]) {
+			pipe = usbhs_dcp_malloc(priv);
+			usbhsh_hpriv_to_dcp(hpriv) = pipe;
+		} else {
+			pipe = usbhs_pipe_malloc(priv,
+						 pipe_type[i],
+						 dir_in);
+		}
+
+		pipe->mod_private = pipe_info + i;
+	}
+}
+
+static int usbhsh_start(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	/* add hcd */
+	ret = usb_add_hcd(hcd, 0, 0);
+	if (ret < 0)
+		return 0;
+
+	/*
+	 * pipe initialize and enable DCP
+	 */
+	usbhs_pipe_init(priv,
+			usbhsh_dma_map_ctrl);
+	usbhs_fifo_init(priv);
+	usbhsh_pipe_init_for_host(priv);
+
+	/*
+	 * system config enble
+	 * - HI speed
+	 * - host
+	 * - usb module
+	 */
+	usbhs_sys_hispeed_ctrl(priv, 1);
+	usbhs_sys_host_ctrl(priv, 1);
+	usbhs_sys_usb_ctrl(priv, 1);
+
+	/*
+	 * enable irq callback
+	 */
+	mod->irq_attch		= usbhsh_irq_attch;
+	mod->irq_dtch		= usbhsh_irq_dtch;
+	mod->irq_sack		= usbhsh_irq_setup_ack;
+	mod->irq_sign		= usbhsh_irq_setup_err;
+	usbhs_irq_callback_update(priv, mod);
+
+	dev_dbg(dev, "start host\n");
+
+	return ret;
+}
+
+static int usbhsh_stop(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	usb_remove_hcd(hcd);
+
+	/* disable sys */
+	usbhs_sys_hispeed_ctrl(priv, 0);
+	usbhs_sys_host_ctrl(priv, 0);
+	usbhs_sys_usb_ctrl(priv, 0);
+
+	dev_dbg(dev, "quit host\n");
+
+	return 0;
+}
+
+int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv;
+	struct usb_hcd *hcd;
+	struct usbhsh_pipe_info *pipe_info;
+	struct usbhsh_device *udev;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int pipe_size = usbhs_get_dparam(priv, pipe_size);
+	int i;
+
+	/* initialize hcd */
+	hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name);
+	if (!hcd) {
+		dev_err(dev, "Failed to create hcd\n");
+		return -ENOMEM;
+	}
+
+	pipe_info = kzalloc(sizeof(*pipe_info) * pipe_size, GFP_KERNEL);
+	if (!pipe_info) {
+		dev_err(dev, "Could not allocate pipe_info\n");
+		goto usbhs_mod_host_probe_err;
+	}
+
+	/*
+	 * CAUTION
+	 *
+	 * There is no guarantee that it is possible to access usb module here.
+	 * Don't accesses to it.
+	 * The accesse will be enable after "usbhsh_start"
+	 */
+
+	hpriv = usbhsh_hcd_to_hpriv(hcd);
+
+	/*
+	 * register itself
+	 */
+	usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST);
+
+	/* init hpriv */
+	hpriv->mod.name		= "host";
+	hpriv->mod.start	= usbhsh_start;
+	hpriv->mod.stop		= usbhsh_stop;
+	hpriv->pipe_info	= pipe_info;
+	hpriv->pipe_size	= pipe_size;
+	hpriv->done		= NULL;
+	usbhsh_req_list_init(hpriv);
+	usbhsh_port_stat_init(hpriv);
+
+	/* init all device */
+	usbhsh_for_each_udev_with_dev0(udev, hpriv, i) {
+		udev->usbv	= NULL;
+		INIT_LIST_HEAD(&udev->ep_list_head);
+	}
+
+	dev_info(dev, "host probed\n");
+
+	return 0;
+
+usbhs_mod_host_probe_err:
+	usb_put_hcd(hcd);
+
+	return -ENOMEM;
+}
+
+int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+
+	usbhsh_req_list_quit(hpriv);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}