Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6:
  bnx2: Fix the behavior of ethtool when ONBOOT=no
  qla3xxx: Don't sleep while holding lock.
  qla3xxx: Give the PHY time to come out of reset.
  ipv4 routing: Ensure that route cache entries are usable and reclaimable with caching is off
  net: Move rx skb_orphan call to where needed
  ipv6: Use correct data types for ICMPv6 type and code
  net: let KS8842 driver depend on HAS_IOMEM
  can: let SJA1000 driver depend on HAS_IOMEM
  netxen: fix firmware init handshake
  netxen: fix build with without CONFIG_PM
  netfilter: xt_rateest: fix comparison with self
  netfilter: xt_quota: fix incomplete initialization
  netfilter: nf_log: fix direct userspace memory access in proc handler
  netfilter: fix some sparse endianess warnings
  netfilter: nf_conntrack: fix conntrack lookup race
  netfilter: nf_conntrack: fix confirmation race condition
  netfilter: nf_conntrack: death_by_timeout() fix

6 files changed, 42 insertions, 21 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1dc7215..c155bd3 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1725,6 +1725,7 @@ config TLAN
 
 config KS8842
 	tristate "Micrel KSZ8842"
+	depends on HAS_IOMEM
 	help
 	  This platform driver is for Micrel KSZ8842 chip.
 
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 38f1c33..b70cc99 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6825,6 +6825,14 @@ bnx2_nway_reset(struct net_device *dev)
 	return 0;
 }
 
+static u32
+bnx2_get_link(struct net_device *dev)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+
+	return bp->link_up;
+}
+
 static int
 bnx2_get_eeprom_len(struct net_device *dev)
 {
@@ -7392,7 +7400,7 @@ static const struct ethtool_ops bnx2_ethtool_ops = {
 	.get_wol		= bnx2_get_wol,
 	.set_wol		= bnx2_set_wol,
 	.nway_reset		= bnx2_nway_reset,
-	.get_link		= ethtool_op_get_link,
+	.get_link		= bnx2_get_link,
 	.get_eeprom_len		= bnx2_get_eeprom_len,
 	.get_eeprom		= bnx2_get_eeprom,
 	.set_eeprom		= bnx2_set_eeprom,
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index d5e18812..33821a8 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -36,7 +36,7 @@ config CAN_CALC_BITTIMING
 	  If unsure, say Y.
 
 config CAN_SJA1000
-	depends on CAN_DEV
+	depends on CAN_DEV && HAS_IOMEM
 	tristate "Philips SJA1000"
 	---help---
 	  Driver for the SJA1000 CAN controllers from Philips or NXP
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index bdb143d..055bb61 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -944,28 +944,31 @@ int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
 	u32 val = 0;
 	int retries = 60;
 
-	if (!pegtune_val) {
-		do {
-			val = NXRD32(adapter, CRB_CMDPEG_STATE);
+	if (pegtune_val)
+		return 0;
 
-			if (val == PHAN_INITIALIZE_COMPLETE ||
-				val == PHAN_INITIALIZE_ACK)
-				return 0;
+	do {
+		val = NXRD32(adapter, CRB_CMDPEG_STATE);
 
-			msleep(500);
+		switch (val) {
+		case PHAN_INITIALIZE_COMPLETE:
+		case PHAN_INITIALIZE_ACK:
+			return 0;
+		case PHAN_INITIALIZE_FAILED:
+			goto out_err;
+		default:
+			break;
+		}
 
-		} while (--retries);
+		msleep(500);
 
-		if (!retries) {
-			pegtune_val = NXRD32(adapter,
-					NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
-			printk(KERN_WARNING "netxen_phantom_init: init failed, "
-					"pegtune_val=%x\n", pegtune_val);
-			return -1;
-		}
-	}
+	} while (--retries);
 
-	return 0;
+	NXWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED);
+
+out_err:
+	dev_warn(&adapter->pdev->dev, "firmware init failed\n");
+	return -EIO;
 }
 
 static int
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 71daa3d..2919a2d 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -705,7 +705,7 @@ netxen_start_firmware(struct netxen_adapter *adapter, int request_fw)
 		first_driver = (adapter->ahw.pci_func == 0);
 
 	if (!first_driver)
-		return 0;
+		goto wait_init;
 
 	first_boot = NXRD32(adapter, NETXEN_CAM_RAM(0x1fc));
 
@@ -752,6 +752,7 @@ netxen_start_firmware(struct netxen_adapter *adapter, int request_fw)
 		| (_NETXEN_NIC_LINUX_SUBVERSION);
 	NXWR32(adapter, CRB_DRIVER_VERSION, val);
 
+wait_init:
 	/* Handshake with the card before we register the devices. */
 	err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
 	if (err) {
@@ -1178,6 +1179,7 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 	free_netdev(netdev);
 }
 
+#ifdef CONFIG_PM
 static int
 netxen_nic_suspend(struct pci_dev *pdev, pm_message_t state)
 {
@@ -1242,6 +1244,7 @@ netxen_nic_resume(struct pci_dev *pdev)
 
 	return 0;
 }
+#endif
 
 static int netxen_nic_open(struct net_device *netdev)
 {
@@ -1771,8 +1774,10 @@ static struct pci_driver netxen_driver = {
 	.id_table = netxen_pci_tbl,
 	.probe = netxen_nic_probe,
 	.remove = __devexit_p(netxen_nic_remove),
+#ifdef CONFIG_PM
 	.suspend = netxen_nic_suspend,
 	.resume = netxen_nic_resume
+#endif
 };
 
 /* Driver Registration on NetXen card    */
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index bbc6d4d..3e4b67a 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3142,6 +3142,7 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev)
 						(void __iomem *)port_regs;
 	u32 delay = 10;
 	int status = 0;
+	unsigned long hw_flags = 0;
 
 	if(ql_mii_setup(qdev))
 		return -1;
@@ -3150,7 +3151,8 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev)
 	ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
 			    (ISP_SERIAL_PORT_IF_WE |
 			     (ISP_SERIAL_PORT_IF_WE << 16)));
-
+	/* Give the PHY time to come out of reset. */
+	mdelay(100);
 	qdev->port_link_state = LS_DOWN;
 	netif_carrier_off(qdev->ndev);
 
@@ -3350,7 +3352,9 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev)
 		value = ql_read_page0_reg(qdev, &port_regs->portStatus);
 		if (value & PORT_STATUS_IC)
 			break;
+		spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
 		msleep(500);
+		spin_lock_irqsave(&qdev->hw_lock, hw_flags);
 	} while (--delay);
 
 	if (delay == 0) {