Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (21 commits)
  sh: fix sh2a cache entry_mask
  sh: Enable NFS root in Migo-R defconfig.
  sh: FTRACE renamed to FUNCTION_TRACER.
  sh: Fix up the shared IRQ demuxer's control bit testing logic.
  Define SCSPTR1 for SH 7751R
  sh: Add sci_rxd_in of SH4-202
  Add support usb setting on sh 7366
  sh: Change register name SCSPTR to SCSPTR2
  sh: use the new byteorder headers.
  sh: SHmedia ISA tuning fixups.
  sh: Kill off long-dead HD64465 cchip support.
  sh: Revert "SH 7366 needs SCIF_ONLY"
  sh: Simplify and lock down the ISA tuning.
  sh: sh7785lcr: Select uImage as default image target.
  sh: Add on-chip RTC support for SH7722.
  SH 7366 needs SCIF_ONLY
  gdrom: Fix compile error
  sh: Provide a sample defconfig for the UL2 (SH7366) board.
  sh: Fix FPU tuning on toolchains with mismatched multilib targets.
  sh: oprofile: Fix up the SH7750 performance counter name.
  ...

6 files changed, 42 insertions, 1043 deletions

diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 9aaa86b..2eecb77 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -495,9 +495,10 @@ static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode)
 	return cdrom_open(gd.cd_info, bdev, mode);
 }
 
-static int gdrom_bdops_release(struct block_device *bdev, fmode_t mode)
+static int gdrom_bdops_release(struct gendisk *disk, fmode_t mode)
 {
-	return cdrom_release(gd.cd_info, mode);
+	cdrom_release(gd.cd_info, mode);
+	return 0;
 }
 
 static int gdrom_bdops_mediachanged(struct gendisk *disk)
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index f57eeae..2229044 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -188,10 +188,6 @@ config PCMCIA_M8XX
 
 	  This driver is also available as a module called m8xx_pcmcia.
 
-config HD64465_PCMCIA
-	tristate "HD64465 host bridge support"
-	depends on HD64465 && PCMCIA
-
 config PCMCIA_AU1X00
 	tristate "Au1x00 pcmcia support"
 	depends on SOC_AU1X00 && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 23e492b..238629a 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -22,7 +22,6 @@ obj-$(CONFIG_I82365)				+= i82365.o
 obj-$(CONFIG_I82092)				+= i82092.o
 obj-$(CONFIG_TCIC)				+= tcic.o
 obj-$(CONFIG_PCMCIA_M8XX)			+= m8xx_pcmcia.o
-obj-$(CONFIG_HD64465_PCMCIA)			+= hd64465_ss.o
 obj-$(CONFIG_PCMCIA_SA1100)			+= sa11xx_core.o sa1100_cs.o
 obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_core.o sa1111_cs.o
 obj-$(CONFIG_M32R_PCC)				+= m32r_pcc.o
diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c
deleted file mode 100644
index 9ef69cd..0000000
--- a/drivers/pcmcia/hd64465_ss.c
+++ /dev/null
@@ -1,939 +0,0 @@
-/*
- * Device driver for the PCMCIA controller module of the
- * Hitachi HD64465 handheld companion chip.
- *
- * Note that the HD64465 provides a very thin PCMCIA host bridge
- * layer, requiring a lot of the work of supporting cards to be
- * performed by the processor.  For example: mapping of card
- * interrupts to processor IRQs is done by IRQ demuxing software;
- * IO and memory mappings are fixed; setting voltages according
- * to card Voltage Select pins etc is done in software.
- *
- * Note also that this driver uses only the simple, fixed,
- * 16MB, 16-bit wide mappings to PCMCIA spaces defined by the
- * HD64465.  Larger mappings, smaller mappings, or mappings of
- * different width to the same socket, are all possible only by
- * involving the SH7750's MMU, which is considered unnecessary here.
- * The downside is that it may be possible for some drivers to
- * break because they need or expect 8-bit mappings.
- *
- * This driver currently supports only the following configuration:
- * SH7750 CPU, HD64465, TPS2206 voltage control chip.
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <asm/errno.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/hd64465/hd64465.h>
-#include <asm/hd64465/io.h>
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/ss.h>
-
-#define MODNAME "hd64465_ss"
-
-/* #define HD64465_DEBUG 1 */
-
-#if HD64465_DEBUG
-#define DPRINTK(args...)	printk(MODNAME ": " args)
-#else
-#define DPRINTK(args...)
-#endif
-
-extern int hd64465_io_debug;
-extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags);
-extern void p3_iounmap(void *addr);
-
-/*============================================================*/
-
-#define HS_IO_MAP_SIZE 	(64*1024)
-
-typedef struct hs_socket_t
-{
-    unsigned int	number;
-    u_int   	    	irq;
-    u_long  	    	mem_base;
-    void		*io_base;
-    u_long  	    	mem_length;
-    u_int   	    	ctrl_base;
-    socket_state_t  	state;
-    pccard_io_map     	io_maps[MAX_IO_WIN];
-    pccard_mem_map  	mem_maps[MAX_WIN];
-    struct pcmcia_socket	socket;
-} hs_socket_t;
-
-
-
-#define HS_MAX_SOCKETS 2
-static hs_socket_t hs_sockets[HS_MAX_SOCKETS];
-
-#define hs_in(sp, r)	    inb((sp)->ctrl_base + (r))
-#define hs_out(sp, v, r)    outb(v, (sp)->ctrl_base + (r))
-
-
-/* translate a boolean value to a bit in a register */
-#define bool_to_regbit(sp, r, bi, bo)	    	\
-    do {    	    	    	    	    	\
-    	unsigned short v = hs_in(sp, r);    	\
-	if (bo)     	    	    	    	\
-	    v |= (bi);	    	    	    	\
-	else	    	    	    	    	\
-	    v &= ~(bi);     	    	    	\
-	hs_out(sp, v, r);   	    	    	\
-    } while(0)
-    
-/* register offsets from HD64465_REG_PCC[01]ISR */
-#define ISR 	0x0
-#define GCR 	0x2
-#define CSCR 	0x4
-#define CSCIER 	0x6
-#define SCR 	0x8
-
-
-/* Mask and values for CSCIER register */
-#define IER_MASK    0x80
-#define IER_ON	    0x3f    	/* interrupts on */
-#define IER_OFF     0x00    	/* interrupts off */
-
-/*============================================================*/
-
-#if HD64465_DEBUG > 10
-
-static void cis_hex_dump(const unsigned char *x, int len)
-{
-    	int i;
-	
-    	for (i=0 ; i<len ; i++)
-	{
-	    if (!(i & 0xf))
-	    	printk("\n%08x", (unsigned)(x + i));
-	    printk(" %02x", *(volatile unsigned short*)x);
-	    x += 2;
-	}
-	printk("\n");
-}
-
-#endif
-/*============================================================*/
-
-/*
- * This code helps create the illusion that the IREQ line from
- * the PC card is mapped to one of the CPU's IRQ lines by the
- * host bridge hardware (which is how every host bridge *except*
- * the HD64465 works).  In particular, it supports enabling
- * and disabling the IREQ line by code which knows nothing
- * about the host bridge (e.g. device drivers, IDE code) using
- * the request_irq(), free_irq(), probe_irq_on() and probe_irq_off()
- * functions.  Also, it supports sharing the mapped IRQ with
- * real hardware IRQs from the -IRL0-3 lines.
- */
-
-#define HS_NUM_MAPPED_IRQS  16	/* Limitation of the PCMCIA code */
-static struct
-{
-    /* index is mapped irq number */
-    hs_socket_t *sock;
-    hw_irq_controller *old_handler;
-} hs_mapped_irq[HS_NUM_MAPPED_IRQS];
-
-static void hs_socket_enable_ireq(hs_socket_t *sp)
-{
-    	unsigned short cscier;
-	
-    	DPRINTK("hs_socket_enable_ireq(sock=%d)\n", sp->number);
-
-    	cscier = hs_in(sp, CSCIER);
-	cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK;
-    	cscier |= HD64465_PCCCSCIER_PIREQE_LEVEL;
-	hs_out(sp, cscier, CSCIER);
-}
-
-static void hs_socket_disable_ireq(hs_socket_t *sp)
-{
-    	unsigned short cscier;
-	
-    	DPRINTK("hs_socket_disable_ireq(sock=%d)\n", sp->number);
-	
-    	cscier = hs_in(sp, CSCIER);
-	cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK;
-	hs_out(sp, cscier, CSCIER);
-}
-
-static unsigned int hs_startup_irq(unsigned int irq)
-{
-	hs_socket_enable_ireq(hs_mapped_irq[irq].sock);
-	hs_mapped_irq[irq].old_handler->startup(irq);
-	return 0;
-}
-
-static void hs_shutdown_irq(unsigned int irq)
-{
-	hs_socket_disable_ireq(hs_mapped_irq[irq].sock);
-	hs_mapped_irq[irq].old_handler->shutdown(irq);
-}
-
-static void hs_enable_irq(unsigned int irq)
-{
-	hs_socket_enable_ireq(hs_mapped_irq[irq].sock);
-	hs_mapped_irq[irq].old_handler->enable(irq);
-}
-
-static void hs_disable_irq(unsigned int irq)
-{
-	hs_socket_disable_ireq(hs_mapped_irq[irq].sock);
-	hs_mapped_irq[irq].old_handler->disable(irq);
-}
-
-extern struct hw_interrupt_type no_irq_type;
-
-static void hs_mask_and_ack_irq(unsigned int irq)
-{
-	hs_socket_disable_ireq(hs_mapped_irq[irq].sock);
-	/* ack_none() spuriously complains about an unexpected IRQ */
-	if (hs_mapped_irq[irq].old_handler != &no_irq_type)
-	    hs_mapped_irq[irq].old_handler->ack(irq);
-}
-
-static void hs_end_irq(unsigned int irq)
-{
-	hs_socket_enable_ireq(hs_mapped_irq[irq].sock);
-	hs_mapped_irq[irq].old_handler->end(irq);
-}
-
-
-static struct hw_interrupt_type hd64465_ss_irq_type = {
-	.typename	= "PCMCIA-IRQ",
-	.startup	= hs_startup_irq,
-	.shutdown	= hs_shutdown_irq,
-	.enable		= hs_enable_irq,
-	.disable	= hs_disable_irq,
-	.ack		= hs_mask_and_ack_irq,
-	.end		= hs_end_irq
-};
-
-/* 
- * This function should only ever be called with interrupts disabled.
- */
-static void hs_map_irq(hs_socket_t *sp, unsigned int irq)
-{
-	struct irq_desc *desc;
-
-    	DPRINTK("hs_map_irq(sock=%d irq=%d)\n", sp->number, irq);
-	
-	if (irq >= HS_NUM_MAPPED_IRQS)
-	    return;
-
-	desc = irq_to_desc(irq);
-    	hs_mapped_irq[irq].sock = sp;
-	/* insert ourselves as the irq controller */
-	hs_mapped_irq[irq].old_handler = desc->chip;
-	desc->chip = &hd64465_ss_irq_type;
-}
-
-
-/* 
- * This function should only ever be called with interrupts disabled.
- */
-static void hs_unmap_irq(hs_socket_t *sp, unsigned int irq)
-{
-	struct irq_desc *desc;
-
-    	DPRINTK("hs_unmap_irq(sock=%d irq=%d)\n", sp->number, irq);
-	
-	if (irq >= HS_NUM_MAPPED_IRQS)
-	    return;
-		
-	desc = irq_to_desc(irq);
-	/* restore the original irq controller */
-	desc->chip = hs_mapped_irq[irq].old_handler;
-}
-
-/*============================================================*/
-
-
-/*
- * Set Vpp and Vcc (in tenths of a Volt).  Does not
- * support the hi-Z state.
- *
- * Note, this assumes the board uses a TPS2206 chip to control
- * the Vcc and Vpp voltages to the hs_sockets.  If your board
- * uses the MIC2563 (also supported by the HD64465) then you
- * will have to modify this function.
- */
-    	    	    	    	         /* 0V   3.3V  5.5V */
-static const u_char hs_tps2206_avcc[3] = { 0x00, 0x04, 0x08 };
-static const u_char hs_tps2206_bvcc[3] = { 0x00, 0x80, 0x40 };
-
-static int hs_set_voltages(hs_socket_t *sp, int Vcc, int Vpp)
-{
-    	u_int psr;
-	u_int vcci = 0;
-	u_int sock = sp->number;
-	
-    	DPRINTK("hs_set_voltage(%d, %d, %d)\n", sock, Vcc, Vpp);
-
-    	switch (Vcc)
-	{
-	case 0:  vcci = 0; break;
-	case 33: vcci = 1; break;
-	case 50: vcci = 2; break;
-	default: return 0;
-	}
-
-    	/* Note: Vpp = 120 not supported -- Greg Banks */
-	if (Vpp != 0 && Vpp != Vcc)
-	    return 0;
-	
-	/* The PSR register holds 8 of the 9 bits which control
-	 * the TPS2206 via its serial interface.
-	 */
-	psr = inw(HD64465_REG_PCCPSR);
-	switch (sock)
-	{
-	case 0:
-	    psr &= 0x0f;
-	    psr |= hs_tps2206_avcc[vcci];
-	    psr |= (Vpp == 0 ? 0x00 : 0x02);
-	    break;
-	case 1:
-	    psr &= 0xf0;
-	    psr |= hs_tps2206_bvcc[vcci];
-	    psr |= (Vpp == 0 ? 0x00 : 0x20);
-	    break;
-	};
-	outw(psr, HD64465_REG_PCCPSR);
-	
-	return 1;
-}
-
-
-/*============================================================*/
-
-/*
- * Drive the RESET line to the card.
- */
-static void hs_reset_socket(hs_socket_t *sp, int on)
-{
-    	unsigned short v;
-	
-	v = hs_in(sp, GCR);
-	if (on)
-	    v |= HD64465_PCCGCR_PCCR;
-	else
-	    v &= ~HD64465_PCCGCR_PCCR;
-	hs_out(sp, v, GCR);
-}
-
-/*============================================================*/
-
-static int hs_init(struct pcmcia_socket *s)
-{
-    	hs_socket_t *sp = container_of(s, struct hs_socket_t, socket);
-	
-    	DPRINTK("hs_init(%d)\n", sp->number);
-
-	return 0;
-}
-
-/*============================================================*/
-
-
-static int hs_get_status(struct pcmcia_socket *s, u_int *value)
-{
-    	hs_socket_t *sp = container_of(s, struct hs_socket_t, socket);
-    	unsigned int isr;
-	u_int status = 0;
-	
-	
-	isr = hs_in(sp, ISR);
-
-    	/* Card is seated and powered when *both* CD pins are low */
-	if ((isr & HD64465_PCCISR_PCD_MASK) == 0)
-    	{
-	    status |= SS_DETECT;    /* card present */
-
-	    switch (isr & HD64465_PCCISR_PBVD_MASK)
-	    {
-	    case HD64465_PCCISR_PBVD_BATGOOD:   
-		break;
-	    case HD64465_PCCISR_PBVD_BATWARN:
-		status |= SS_BATWARN;
-		break;
-	    default:
-		status |= SS_BATDEAD;
-		break;
-	    }
-
-	    if (isr & HD64465_PCCISR_PREADY)
-		status |= SS_READY;
-
-	    if (isr & HD64465_PCCISR_PMWP)
-		status |= SS_WRPROT;
-		
-	    /* Voltage Select pins interpreted as per Table 4-5 of the std.
-	     * Assuming we have the TPS2206, the socket is a "Low Voltage
-	     * key, 3.3V and 5V available, no X.XV available".
-	     */
-	    switch (isr & (HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1))
-	    {
-	    case HD64465_PCCISR_PVS1:
-	    	printk(KERN_NOTICE MODNAME ": cannot handle X.XV card, ignored\n");
-		status = 0;
-	    	break;
-	    case 0:
-	    case HD64465_PCCISR_PVS2:
-    	    	/* 3.3V */
-    	    	status |= SS_3VCARD;
-	    	break;
-	    case HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1:
-	    	/* 5V */
-	    	break;
-	    }
-		
-	    /* TODO: SS_POWERON */
-	    /* TODO: SS_STSCHG */
-    	}	
-	
-    	DPRINTK("hs_get_status(%d) = %x\n", sock, status);
-	
-	*value = status;
-	return 0;
-}
-
-/*============================================================*/
-
-static int hs_set_socket(struct pcmcia_socket *s, socket_state_t *state)
-{
-    	hs_socket_t *sp = container_of(s, struct hs_socket_t, socket);
-    	u_long flags;
-	u_int changed;
-	unsigned short cscier;
-
-    	DPRINTK("hs_set_socket(sock=%d, flags=%x, csc_mask=%x, Vcc=%d, Vpp=%d, io_irq=%d)\n",
-	    sock, state->flags, state->csc_mask, state->Vcc, state->Vpp, state->io_irq);
-	
-	local_irq_save(flags);	/* Don't want interrupts happening here */
-
-	if (state->Vpp != sp->state.Vpp ||
-	    state->Vcc != sp->state.Vcc) {
-	    if (!hs_set_voltages(sp, state->Vcc, state->Vpp)) {
-	    	local_irq_restore(flags);
-	    	return -EINVAL;
-	    }
-	}
-
-/*    	hd64465_io_debug = 1; */
-    	/*
-	 * Handle changes in the Card Status Change mask,
-	 * by propagating to the CSCR register
-	 */	
-	changed = sp->state.csc_mask ^ state->csc_mask;
-	cscier = hs_in(sp, CSCIER);
-	    
-	if (changed & SS_DETECT) {
-	    if (state->csc_mask & SS_DETECT)
-		cscier |= HD64465_PCCCSCIER_PCDE;
-	    else
-		cscier &= ~HD64465_PCCCSCIER_PCDE;
-	}
-
-	if (changed & SS_READY) {
-	    if (state->csc_mask & SS_READY)
-		cscier |= HD64465_PCCCSCIER_PRE;
-	    else
-		cscier &= ~HD64465_PCCCSCIER_PRE;
-	}
-
-	if (changed & SS_BATDEAD) {
-	    if (state->csc_mask & SS_BATDEAD)
-		cscier |= HD64465_PCCCSCIER_PBDE;
-	    else
-		cscier &= ~HD64465_PCCCSCIER_PBDE;
-	}
-
-	if (changed & SS_BATWARN) {
-	    if (state->csc_mask & SS_BATWARN)
-		cscier |= HD64465_PCCCSCIER_PBWE;
-	    else
-		cscier &= ~HD64465_PCCCSCIER_PBWE;
-	}
-
-	if (changed & SS_STSCHG) {
-	    if (state->csc_mask & SS_STSCHG)
-		cscier |= HD64465_PCCCSCIER_PSCE;
-	    else
-		cscier &= ~HD64465_PCCCSCIER_PSCE;
-	}
-
-    	hs_out(sp, cscier, CSCIER);
-
-	if (sp->state.io_irq && !state->io_irq)
-	    hs_unmap_irq(sp, sp->state.io_irq);
-	else if (!sp->state.io_irq && state->io_irq)
-	    hs_map_irq(sp, state->io_irq);
-
-
-    	/*
-	 * Handle changes in the flags field,
-	 * by propagating to config registers.
-	 */	
-	changed = sp->state.flags ^ state->flags;
-
-	if (changed & SS_IOCARD) {
-	    DPRINTK("card type: %s\n",
-		    (state->flags & SS_IOCARD ? "i/o" : "memory" ));
-	    bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCT,
-		state->flags & SS_IOCARD);
-	}
-
-	if (changed & SS_RESET) {
-	    DPRINTK("%s reset card\n",
-		(state->flags & SS_RESET ? "start" : "stop"));
-	    bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCR,
-		state->flags & SS_RESET);
-	}
-
-	if (changed & SS_OUTPUT_ENA) {
-	    DPRINTK("%sabling card output\n",
-		(state->flags & SS_OUTPUT_ENA ? "en" : "dis"));
-	    bool_to_regbit(sp, GCR, HD64465_PCCGCR_PDRV,
-		state->flags & SS_OUTPUT_ENA);
-	}
-
-    	/* TODO: SS_SPKR_ENA */
-	    
-/*    	hd64465_io_debug = 0; */
-	sp->state = *state;
-	    
-	local_irq_restore(flags);
-
-#if HD64465_DEBUG > 10
-	if (state->flags & SS_OUTPUT_ENA)   
-	    cis_hex_dump((const unsigned char*)sp->mem_base, 0x100);
-#endif
-	return 0;
-}
-
-/*============================================================*/
-
-static int hs_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
-{
-    	hs_socket_t *sp = container_of(s, struct hs_socket_t, socket);
-	int map = io->map;
-	int sock = sp->number;
-	struct pccard_io_map *sio;
-	pgprot_t prot;
-
-    	DPRINTK("hs_set_io_map(sock=%d, map=%d, flags=0x%x, speed=%dns, start=%#lx, stop=%#lx)\n",
-	    sock, map, io->flags, io->speed, io->start, io->stop);
-	if (map >= MAX_IO_WIN)
-	    return -EINVAL;
-	sio = &sp->io_maps[map];
-
-    	/* check for null changes */	
-    	if (io->flags == sio->flags &&
-	    io->start == sio->start &&
-	    io->stop == sio->stop)
-	    return 0;
-	
-	if (io->flags & MAP_AUTOSZ)
-	    prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IODYN);
-	else if (io->flags & MAP_16BIT)
-	    prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO16);
-	else
-	    prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO8);
-
-	/* TODO: handle MAP_USE_WAIT */
-	if (io->flags & MAP_USE_WAIT)
-	    printk(KERN_INFO MODNAME ": MAP_USE_WAIT unimplemented\n");
-	/* TODO: handle MAP_PREFETCH */
-	if (io->flags & MAP_PREFETCH)
-	    printk(KERN_INFO MODNAME ": MAP_PREFETCH unimplemented\n");
-	/* TODO: handle MAP_WRPROT */
-	if (io->flags & MAP_WRPROT)
-	    printk(KERN_INFO MODNAME ": MAP_WRPROT unimplemented\n");
-	/* TODO: handle MAP_0WS */
-	if (io->flags & MAP_0WS)
-	    printk(KERN_INFO MODNAME ": MAP_0WS unimplemented\n");
-
-	if (io->flags & MAP_ACTIVE) {
-	    unsigned long pstart, psize, paddrbase;
-	    
-	    paddrbase = virt_to_phys((void*)(sp->mem_base + 2 * HD64465_PCC_WINDOW));
-	    pstart = io->start & PAGE_MASK;
-	    psize = ((io->stop + PAGE_SIZE) & PAGE_MASK) - pstart;
-
-    	    /*
-	     * Change PTEs in only that portion of the mapping requested
-	     * by the caller.  This means that most of the time, most of
-	     * the PTEs in the io_vma will be unmapped and only the bottom
-	     * page will be mapped.  But the code allows for weird cards
-	     * that might want IO ports > 4K.
-	     */
-	    sp->io_base = p3_ioremap(paddrbase + pstart, psize, pgprot_val(prot));
-	    
-	    /*
-	     * Change the mapping used by inb() outb() etc
-	     */
-	    hd64465_port_map(io->start,
-		io->stop - io->start + 1,
-	    	(unsigned long)sp->io_base + io->start, 0);
-	} else {
-	    hd64465_port_unmap(sio->start, sio->stop - sio->start + 1);
-	    p3_iounmap(sp->io_base);
-	}
-	
-	*sio = *io;
-	return 0;
-}
-
-/*============================================================*/
-
-static int hs_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *mem)
-{
-    	hs_socket_t *sp = container_of(s, struct hs_socket_t, socket);
-	struct pccard_mem_map *smem;
-	int map = mem->map;
-	unsigned long paddr;
-
-#if 0
-    	DPRINTK("hs_set_mem_map(sock=%d, map=%d, flags=0x%x, card_start=0x%08x)\n",
-	    sock, map, mem->flags, mem->card_start);
-#endif
-
-	if (map >= MAX_WIN)
-	    return -EINVAL;
-	smem = &sp->mem_maps[map];
-	
-	paddr = sp->mem_base;	    	    /* base of Attribute mapping */
-	if (!(mem->flags & MAP_ATTRIB))
-	    paddr += HD64465_PCC_WINDOW;    /* base of Common mapping */
-	paddr += mem->card_start;
-
-    	/* Because we specified SS_CAP_STATIC_MAP, we are obliged
-	 * at this time to report the system address corresponding
-	 * to the card address requested.  This is how Socket Services
-	 * queries our fixed mapping.  I wish this fact had been
-	 * documented - Greg Banks.
-	 */
-    	mem->static_start = paddr;
-	
-	*smem = *mem;
-	
-    	return 0;
-}
-
-/* TODO: do we need to use the MMU to access Common memory ??? */
-
-/*============================================================*/
-
-/*
- * This function is registered with the HD64465 glue code to do a
- * secondary demux step on the PCMCIA interrupts.  It handles 
- * mapping the IREQ request from the card to a standard Linux
- * IRQ, as requested by SocketServices.
- */
-static int hs_irq_demux(int irq, void *dev)
-{
-    	hs_socket_t *sp = dev;
-	u_int cscr;
-    	
-    	DPRINTK("hs_irq_demux(irq=%d)\n", irq);
-
-    	if (sp->state.io_irq &&
-	    (cscr = hs_in(sp, CSCR)) & HD64465_PCCCSCR_PIREQ) {
-	    cscr &= ~HD64465_PCCCSCR_PIREQ;
-	    hs_out(sp, cscr, CSCR);
-	    return sp->state.io_irq;
-	}
-	    
-	return irq;
-}
-
-/*============================================================*/
-
-/*
- * Interrupt handling routine.
- */
- 
-static irqreturn_t hs_interrupt(int irq, void *dev)
-{
-    	hs_socket_t *sp = dev;
-	u_int events = 0;
-	u_int cscr;
-
-	cscr = hs_in(sp, CSCR);
-	
-	DPRINTK("hs_interrupt, cscr=%04x\n", cscr);
-
-	/* check for bus-related changes to be reported to Socket Services */
-	if (cscr & HD64465_PCCCSCR_PCDC) {
-	    /* double-check for a 16-bit card, as we don't support CardBus */
-	    if ((hs_in(sp, ISR) & HD64465_PCCISR_PCD_MASK) != 0) {
-	    	printk(KERN_NOTICE MODNAME
-		    ": socket %d, card not a supported card type or not inserted correctly\n",
-		    sp->number);
-		/* Don't do the rest unless a card is present */
-		cscr &= ~(HD64465_PCCCSCR_PCDC|
-		    	  HD64465_PCCCSCR_PRC|
-			  HD64465_PCCCSCR_PBW|
-		    	  HD64465_PCCCSCR_PBD|
-			  HD64465_PCCCSCR_PSC);
-	    } else {
-	    	cscr &= ~HD64465_PCCCSCR_PCDC;
-		events |= SS_DETECT;    	/* card insertion or removal */
-    	    }
-	}
-	if (cscr & HD64465_PCCCSCR_PRC) {
-	    cscr &= ~HD64465_PCCCSCR_PRC;
-	    events |= SS_READY;     	/* ready signal changed */
-	}
-	if (cscr & HD64465_PCCCSCR_PBW) {
-	    cscr &= ~HD64465_PCCCSCR_PSC;
-	    events |= SS_BATWARN;     	/* battery warning */
-	}
-	if (cscr & HD64465_PCCCSCR_PBD) {
-	    cscr &= ~HD64465_PCCCSCR_PSC;
-	    events |= SS_BATDEAD;     	/* battery dead */
-	}
-	if (cscr & HD64465_PCCCSCR_PSC) {
-	    cscr &= ~HD64465_PCCCSCR_PSC;
-	    events |= SS_STSCHG;     	/* STSCHG (status changed) signal */
-	}
-	
-	if (cscr & HD64465_PCCCSCR_PIREQ) {
-	    cscr &= ~HD64465_PCCCSCR_PIREQ;
-
-    	    /* This should have been dealt with during irq demux */	    
-	    printk(KERN_NOTICE MODNAME ": unexpected IREQ from card\n");
-	}
-
-	hs_out(sp, cscr, CSCR);
-
-	if (events)
-		pcmcia_parse_events(&sp->socket, events);
-
-	return IRQ_HANDLED;
-}
-
-/*============================================================*/
-
-static struct pccard_operations hs_operations = {
-	.init			= hs_init,
-	.get_status		= hs_get_status,
-	.set_socket		= hs_set_socket,
-	.set_io_map		= hs_set_io_map,
-	.set_mem_map		= hs_set_mem_map,
-};
-
-static int hs_init_socket(hs_socket_t *sp, int irq, unsigned long mem_base,
-    	    unsigned int ctrl_base)
-{
-    	unsigned short v;
-    	int i, err;
-
-    	memset(sp, 0, sizeof(*sp));
-	sp->irq = irq;
-	sp->mem_base = mem_base;
-	sp->mem_length = 4*HD64465_PCC_WINDOW;	/* 16MB */
-	sp->ctrl_base = ctrl_base;
-	
-	for (i=0 ; i<MAX_IO_WIN ; i++)
-	    sp->io_maps[i].map = i;
-	for (i=0 ; i<MAX_WIN ; i++)
-	    sp->mem_maps[i].map = i;
-	
-	hd64465_register_irq_demux(sp->irq, hs_irq_demux, sp);
-	
-    	if ((err = request_irq(sp->irq, hs_interrupt, IRQF_DISABLED, MODNAME, sp)) < 0)
-	    return err;
-    	if (request_mem_region(sp->mem_base, sp->mem_length, MODNAME) == 0) {
-    	    sp->mem_base = 0;
-	    return -ENOMEM;
-	}
-
-
-	/* According to section 3.2 of the PCMCIA standard, low-voltage
-	 * capable cards must implement cold insertion, i.e. Vpp and
-	 * Vcc set to 0 before card is inserted.
-	 */
-	/*hs_set_voltages(sp, 0, 0);*/
-	
-	/* hi-Z the outputs to the card and set 16MB map mode */
-	v = hs_in(sp, GCR);
-	v &= ~HD64465_PCCGCR_PCCT;  	/* memory-only card */
-	hs_out(sp, v, GCR);
-
-	v = hs_in(sp, GCR);
-	v |= HD64465_PCCGCR_PDRV;   	/* enable outputs to card */
-	hs_out(sp, v, GCR);
-
-	v = hs_in(sp, GCR);
-	v |= HD64465_PCCGCR_PMMOD; 	/* 16MB mapping mode */
-	hs_out(sp, v, GCR);
-
-	v = hs_in(sp, GCR);
-	/* lowest 16MB of Common */
-	v &= ~(HD64465_PCCGCR_PPA25|HD64465_PCCGCR_PPA24); 
-	hs_out(sp, v, GCR);
-	
-	hs_reset_socket(sp, 1);
-
-	printk(KERN_INFO "HD64465 PCMCIA bridge socket %d at 0x%08lx irq %d\n",
-	    	i, sp->mem_base, sp->irq);
-
-    	return 0;
-}
-
-static void hs_exit_socket(hs_socket_t *sp)
-{
-    	unsigned short cscier, gcr;
-	unsigned long flags;
-	
-	local_irq_save(flags);
-
-	/* turn off interrupts in hardware */
-    	cscier = hs_in(sp, CSCIER);
-	cscier = (cscier & IER_MASK) | IER_OFF;
-    	hs_out(sp, cscier, CSCIER);
-	
-	/* hi-Z the outputs to the card */
-    	gcr = hs_in(sp, GCR);
-	gcr &= HD64465_PCCGCR_PDRV;
-	hs_out(sp, gcr, GCR);
-
-    	/* power the card down */
-	hs_set_voltages(sp, 0, 0);
-
-    	if (sp->mem_base != 0)
-	    release_mem_region(sp->mem_base, sp->mem_length);
-	if (sp->irq != 0) {
-	    free_irq(sp->irq, hs_interrupt);
-    	    hd64465_unregister_irq_demux(sp->irq);
-	}
-
-	local_irq_restore(flags);
-}
-
-static struct device_driver hd64465_driver = {
-	.name = "hd64465-pcmcia",
-	.bus = &platform_bus_type,
-	.suspend = pcmcia_socket_dev_suspend,
-	.resume = pcmcia_socket_dev_resume,
-};
-
-static struct platform_device hd64465_device = {
-	.name = "hd64465-pcmcia",
-	.id = 0,
-};
-
-static int __init init_hs(void)
-{
-	int i;
-	unsigned short v;
-
-/*	hd64465_io_debug = 1; */
-	if (driver_register(&hd64465_driver))
-		return -EINVAL;
-	
-	/* Wake both sockets out of STANDBY mode */
-	/* TODO: wait 15ms */
-	v = inw(HD64465_REG_SMSCR);
-	v &= ~(HD64465_SMSCR_PC0ST|HD64465_SMSCR_PC1ST);
-	outw(v, HD64465_REG_SMSCR);
-
-	/* keep power controller out of shutdown mode */
-	v = inb(HD64465_REG_PCC0SCR);
-	v |= HD64465_PCCSCR_SHDN;
-	outb(v, HD64465_REG_PCC0SCR);
-
-    	/* use serial (TPS2206) power controller */
-	v = inb(HD64465_REG_PCC0CSCR);
-	v |= HD64465_PCCCSCR_PSWSEL;
-	outb(v, HD64465_REG_PCC0CSCR);
-
-	/*
-	 * Setup hs_sockets[] structures and request system resources.
-	 * TODO: on memory allocation failure, power down the socket
-	 *       before quitting.
-	 */
-	for (i=0; i<HS_MAX_SOCKETS; i++) {
-		hs_set_voltages(&hs_sockets[i], 0, 0);
-
-		hs_sockets[i].socket.features |=  SS_CAP_PCCARD | SS_CAP_STATIC_MAP;      /* mappings are fixed in host memory */
-		hs_sockets[i].socket.resource_ops = &pccard_static_ops;
-		hs_sockets[i].socket.irq_mask =  0xffde;/*0xffff*/	    /* IRQs mapped in s/w so can do any, really */
-		hs_sockets[i].socket.map_size = HD64465_PCC_WINDOW;     /* 16MB fixed window size */
-
-		hs_sockets[i].socket.owner = THIS_MODULE;
-		hs_sockets[i].socket.ss_entry = &hs_operations;
-	}
-
-	i = hs_init_socket(&hs_sockets[0],
-	    HD64465_IRQ_PCMCIA0,
-	    HD64465_PCC0_BASE,
-	    HD64465_REG_PCC0ISR);
-	if (i < 0) {
-		unregister_driver(&hd64465_driver);
-		return i;
-	}
-	i = hs_init_socket(&hs_sockets[1],
-	    HD64465_IRQ_PCMCIA1,
-	    HD64465_PCC1_BASE,
-	    HD64465_REG_PCC1ISR);
-	if (i < 0) {
-		unregister_driver(&hd64465_driver);
-		return i;
-	}
-
-/*	hd64465_io_debug = 0; */
-
-	platform_device_register(&hd64465_device);
-
-	for (i=0; i<HS_MAX_SOCKETS; i++) {
-		unsigned int ret;
-		hs_sockets[i].socket.dev.parent = &hd64465_device.dev;
-		hs_sockets[i].number = i;
-		ret = pcmcia_register_socket(&hs_sockets[i].socket);
-		if (ret && i)
-			pcmcia_unregister_socket(&hs_sockets[0].socket);
-	}
-
-    	return 0;
-}
-
-static void __exit exit_hs(void)
-{
-	int i;
-
-	for (i=0 ; i<HS_MAX_SOCKETS ; i++) {
-		pcmcia_unregister_socket(&hs_sockets[i].socket);
-		hs_exit_socket(&hs_sockets[i]);
-	}
-
-	platform_device_unregister(&hd64465_device);
-	unregister_driver(&hd64465_driver);
-}
-
-module_init(init_hs);
-module_exit(exit_hs);
-
-/*============================================================*/
-/*END*/
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index f0658d2..5c0f32c7 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -250,8 +250,7 @@ static inline void h8300_sci_disable(struct uart_port *port)
 }
 #endif
 
-#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \
-    defined(__H8300H__) || defined(__H8300S__)
+#if defined(__H8300H__) || defined(__H8300S__)
 static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
 {
 	int ch = (port->mapbase - SMR0) >> 3;
@@ -285,11 +284,6 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
 #define sci_init_pins_irda NULL
 #endif
 
-#ifdef SCI_ONLY
-#define sci_init_pins_scif NULL
-#endif
-
-#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
 #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
 {
@@ -449,7 +443,6 @@ static inline int scif_rxroom(struct uart_port *port)
 	return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
 }
 #endif
-#endif /* SCIF_ONLY || SCI_AND_SCIF */
 
 static inline int sci_txroom(struct uart_port *port)
 {
@@ -485,11 +478,9 @@ static void sci_transmit_chars(struct uart_port *port)
 		return;
 	}
 
-#ifndef SCI_ONLY
 	if (port->type == PORT_SCIF)
 		count = scif_txroom(port);
 	else
-#endif
 		count = sci_txroom(port);
 
 	do {
@@ -519,12 +510,10 @@ static void sci_transmit_chars(struct uart_port *port)
 	} else {
 		ctrl = sci_in(port, SCSCR);
 
-#if !defined(SCI_ONLY)
 		if (port->type == PORT_SCIF) {
 			sci_in(port, SCxSR); /* Dummy read */
 			sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
 		}
-#endif
 
 		ctrl |= SCI_CTRL_FLAGS_TIE;
 		sci_out(port, SCSCR, ctrl);
@@ -547,11 +536,9 @@ static inline void sci_receive_chars(struct uart_port *port)
 		return;
 
 	while (1) {
-#if !defined(SCI_ONLY)
 		if (port->type == PORT_SCIF)
 			count = scif_rxroom(port);
 		else
-#endif
 			count = sci_rxroom(port);
 
 		/* Don't copy more bytes than there is room for in the buffer */
@@ -810,26 +797,27 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
 
 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 {
-        unsigned short ssr_status, scr_status;
-        struct uart_port *port = ptr;
+	unsigned short ssr_status, scr_status;
+	struct uart_port *port = ptr;
+	irqreturn_t ret = IRQ_NONE;
 
         ssr_status = sci_in(port,SCxSR);
         scr_status = sci_in(port,SCSCR);
 
 	/* Tx Interrupt */
-        if ((ssr_status & 0x0020) && (scr_status & 0x0080))
-                sci_tx_interrupt(irq, ptr);
+	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
+		ret = sci_tx_interrupt(irq, ptr);
 	/* Rx Interrupt */
-        if ((ssr_status & 0x0002) && (scr_status & 0x0040))
-                sci_rx_interrupt(irq, ptr);
+	if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
+		ret = sci_rx_interrupt(irq, ptr);
 	/* Error Interrupt */
-        if ((ssr_status & 0x0080) && (scr_status & 0x0400))
-                sci_er_interrupt(irq, ptr);
+	if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
+		ret = sci_er_interrupt(irq, ptr);
 	/* Break Interrupt */
-        if ((ssr_status & 0x0010) && (scr_status & 0x0200))
-                sci_br_interrupt(irq, ptr);
+	if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
+		ret = sci_br_interrupt(irq, ptr);
 
-	return IRQ_HANDLED;
+	return ret;
 }
 
 #if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
@@ -1054,10 +1042,8 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	sci_out(port, SCSCR, 0x00);	/* TE=0, RE=0, CKE1=0 */
 
-#if !defined(SCI_ONLY)
 	if (port->type == PORT_SCIF)
 		sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
-#endif
 
 	smr_val = sci_in(port, SCSMR) & 3;
 	if ((termios->c_cflag & CSIZE) == CS7)
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 7cd28b2..6163a45 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -16,7 +16,6 @@
 # define SCPCR  0xA4000116 /* 16 bit SCI and SCIF */
 # define SCPDR  0xA4000136 /* 8  bit SCI and SCIF */
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_AND_SCIF
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 # define SCIF0		0xA4400000
 # define SCIF2		0xA4410000
@@ -30,17 +29,15 @@
  * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
  */
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCIF_ONLY
 #define SCIF_ORER    0x0200   /* overrun error bit */
 #elif defined(CONFIG_SH_RTS7751R2D)
+# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
       defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
       defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
@@ -53,28 +50,24 @@
 # define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
 	0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
 	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
-# define SCI_AND_SCIF
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
 # define SCSPTR0 0xfe600024 /* 16 bit SCIF */
 # define SCSPTR1 0xfe610024 /* 16 bit SCIF */
 # define SCSPTR2 0xfe620024 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)          0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 # define SCSPTR0 0xA4400000	  /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define PACR 0xa4050100
 # define PBCR 0xa4050102
 # define SCSCR_INIT(port)          0x3B
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7343)
 # define SCSPTR0 0xffe00010	/* 16 bit SCIF */
 # define SCSPTR1 0xffe10010	/* 16 bit SCIF */
 # define SCSPTR2 0xffe20010	/* 16 bit SCIF */
 # define SCSPTR3 0xffe30010	/* 16 bit SCIF */
 # define SCSCR_INIT(port) 0x32	/* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
 # define PADR			0xA4050120
 # define PSDR			0xA405013e
@@ -82,7 +75,6 @@
 # define PSCR			0xA405011E
 # define SCIF_ORER		0x0001	/* overrun error bit */
 # define SCSCR_INIT(port)	0x0038	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7366)
 # define SCPDR0			0xA405013E      /* 16 bit SCIF0 PSDR */
 # define SCSPTR0		SCPDR0
@@ -97,12 +89,10 @@
 # define SCSPTR5                0xa4050128
 # define SCIF_ORER              0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 # define SCIF_BASE_ADDR    0x01030000
 # define SCIF_ADDR_SH5     PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
@@ -111,14 +101,11 @@
 # define SCSPTR2           ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
 # define SCLSR2            ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
 # define SCSCR_INIT(port)  0x38		/* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_H8S2678)
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 # define SCSPTR0 0xffe00024 /* 16 bit SCIF */
@@ -126,20 +113,17 @@
 # define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)	0x38	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 # define SCSPTR0 0xff923020 /* 16 bit SCIF */
 # define SCSPTR1 0xff924020 /* 16 bit SCIF */
 # define SCSPTR2 0xff925020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)	0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 # define SCSPTR0	0xffe00024	/* 16 bit SCIF */
 # define SCSPTR1	0xffe10024	/* 16 bit SCIF */
 # define SCIF_ORER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7785)
 # define SCSPTR0	0xffea0024	/* 16 bit SCIF */
 # define SCSPTR1	0xffeb0024	/* 16 bit SCIF */
@@ -149,7 +133,6 @@
 # define SCSPTR5	0xffef0024	/* 16 bit SCIF */
 # define SCIF_OPER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
       defined(CONFIG_CPU_SUBTYPE_SH7206) || \
       defined(CONFIG_CPU_SUBTYPE_SH7263)
@@ -158,14 +141,12 @@
 # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
 # define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
 # define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
 # define SCSPTR0 0xf8400020 /* 16 bit SCIF */
 # define SCSPTR1 0xf8410020 /* 16 bit SCIF */
 # define SCSPTR2 0xf8420020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SHX3)
 # define SCSPTR0 0xffc30020		/* 16 bit SCIF */
 # define SCSPTR1 0xffc40020		/* 16 bit SCIF */
@@ -173,7 +154,6 @@
 # define SCSPTR3 0xffc60020		/* 16 bit SCIF */
 # define SCIF_ORER 0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x38	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #else
 # error CPU subtype not defined
 #endif
@@ -186,6 +166,7 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7091)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7722)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
     defined(CONFIG_CPU_SUBTYPE_SH7751)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
@@ -244,55 +225,28 @@
 # define SCIF_TXROOM_MAX 16
 #endif
 
-#if defined(SCI_ONLY)
-# define SCxSR_TEND(port)		SCI_TEND
-# define SCxSR_ERRORS(port)		SCI_ERRORS
-# define SCxSR_RDxF(port)               SCI_RDRF
-# define SCxSR_TDxE(port)               SCI_TDRE
-# define SCxSR_ORER(port)		SCI_ORER
-# define SCxSR_FER(port)		SCI_FER
-# define SCxSR_PER(port)		SCI_PER
-# define SCxSR_BRK(port)		0x00
-# define SCxSR_RDxF_CLEAR(port)		0xbc
-# define SCxSR_ERROR_CLEAR(port)	0xc4
-# define SCxSR_TDxE_CLEAR(port)		0x78
-# define SCxSR_BREAK_CLEAR(port)	0xc4
-#elif defined(SCIF_ONLY)
-# define SCxSR_TEND(port)		SCIF_TEND
-# define SCxSR_ERRORS(port)		SCIF_ERRORS
-# define SCxSR_RDxF(port)               SCIF_RDF
-# define SCxSR_TDxE(port)               SCIF_TDFE
+#define SCxSR_TEND(port)	(((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
+#define SCxSR_ERRORS(port)	(((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
+#define SCxSR_RDxF(port)	(((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
+#define SCxSR_TDxE(port)	(((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
+#define SCxSR_FER(port)		(((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
+#define SCxSR_PER(port)		(((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
+#define SCxSR_BRK(port)		(((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
+
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define SCxSR_ORER(port)		SCIF_ORER
+# define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
 #else
-# define SCxSR_ORER(port)		0x0000
+# define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
 #endif
-# define SCxSR_FER(port)		SCIF_FER
-# define SCxSR_PER(port)		SCIF_PER
-# define SCxSR_BRK(port)		SCIF_BRK
+
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721)
-# define SCxSR_RDxF_CLEAR(port)         (sci_in(port,SCxSR)&0xfffc)
-# define SCxSR_ERROR_CLEAR(port)        (sci_in(port,SCxSR)&0xfd73)
-# define SCxSR_TDxE_CLEAR(port)         (sci_in(port,SCxSR)&0xffdf)
-# define SCxSR_BREAK_CLEAR(port)        (sci_in(port,SCxSR)&0xffe3)
-#else
-/* SH7705 can also use this, clearing is same between 7705 and 7709 */
-# define SCxSR_RDxF_CLEAR(port)		0x00fc
-# define SCxSR_ERROR_CLEAR(port)	0x0073
-# define SCxSR_TDxE_CLEAR(port)		0x00df
-# define SCxSR_BREAK_CLEAR(port)	0x00e3
-#endif
+# define SCxSR_RDxF_CLEAR(port)	 (sci_in(port, SCxSR) & 0xfffc)
+# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
+# define SCxSR_TDxE_CLEAR(port)	 (sci_in(port, SCxSR) & 0xffdf)
+# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3)
 #else
-# define SCxSR_TEND(port)	 (((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
-# define SCxSR_ERRORS(port)	 (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
-# define SCxSR_RDxF(port)        (((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
-# define SCxSR_TDxE(port)        (((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
-# define SCxSR_ORER(port)        (((port)->type == PORT_SCI) ? SCI_ORER   : 0x0000)
-# define SCxSR_FER(port)         (((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
-# define SCxSR_PER(port)         (((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
-# define SCxSR_BRK(port)         (((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
 # define SCxSR_RDxF_CLEAR(port)	 (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
 # define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
 # define SCxSR_TDxE_CLEAR(port)  (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
@@ -574,18 +528,20 @@ static inline int sci_rxd_in(struct uart_port *port)
       defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
       defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
       defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7091)  || \
-      defined(CONFIG_CPU_SUBTYPE_SH4_202)
+      defined(CONFIG_CPU_SUBTYPE_SH7091)
 static inline int sci_rxd_in(struct uart_port *port)
 {
-#ifndef SCIF_ONLY
 	if (port->mapbase == 0xffe00000)
 		return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
-#endif
-#ifndef SCI_ONLY
 	if (port->mapbase == 0xffe80000)
 		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
-#endif
+	return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xffe80000)
+		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
@@ -651,7 +607,7 @@ static inline int sci_rxd_in(struct uart_port *port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 static inline int sci_rxd_in(struct uart_port *port)
 {
-         return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
+         return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
 }
 #elif defined(__H8300H__) || defined(__H8300S__)
 static inline int sci_rxd_in(struct uart_port *port)