diff options
author | Florian Fainelli <f.fainelli@gmail.com> | 2016-06-10 01:23:53 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2016-06-10 05:21:29 (GMT) |
commit | 967dd82ffc52e9d8ea0defde094f9a39a3f4eeed (patch) | |
tree | 962fc28c7c18720f32cd6ac46cc8eb724c61455f /drivers | |
parent | 409a5f27ed1288b582fb164090c6eff17c74f5d4 (diff) | |
download | linux-967dd82ffc52e9d8ea0defde094f9a39a3f4eeed.tar.xz |
net: dsa: b53: Add support for Broadcom RoboSwitch
This patch adds support for Broadcom's BCM53xx switch family, also known
as RoboSwitch. Some of these switches are ubiquituous, found in home
routers, Wi-Fi routers, DSL and cable modem gateways and other
networking related products.
This drivers adds the library driver (b53_common.c) as well as a few bus
glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and
memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx).
Basic operations are supported to bring the Layer 1/2 up and running,
but not much more at this point, subsequent patches add the remaining
features.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/dsa/Kconfig | 2 | ||||
-rw-r--r-- | drivers/net/dsa/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/dsa/b53/Kconfig | 33 | ||||
-rw-r--r-- | drivers/net/dsa/b53/Makefile | 6 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_common.c | 1158 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_mdio.c | 381 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_mmap.c | 260 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_priv.h | 322 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_regs.h | 358 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_spi.c | 331 | ||||
-rw-r--r-- | drivers/net/dsa/b53/b53_srab.c | 415 |
11 files changed, 3268 insertions, 0 deletions
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index 200663c..be481e1 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -28,4 +28,6 @@ config NET_DSA_BCM_SF2 This enables support for the Broadcom Starfighter 2 Ethernet switch chips. +source "drivers/net/dsa/b53/Kconfig" + endmenu diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 76b751d..97bc70a 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -1,3 +1,5 @@ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o + +obj-y += b53/ diff --git a/drivers/net/dsa/b53/Kconfig b/drivers/net/dsa/b53/Kconfig new file mode 100644 index 0000000..27f32a5 --- /dev/null +++ b/drivers/net/dsa/b53/Kconfig @@ -0,0 +1,33 @@ +menuconfig B53 + tristate "Broadcom BCM53xx managed switch support" + depends on NET_DSA + help + This driver adds support for Broadcom managed switch chips. It supports + BCM5325E, BCM5365, BCM539x, BCM53115 and BCM53125 as well as BCM63XX + integrated switches. + +config B53_SPI_DRIVER + tristate "B53 SPI connected switch driver" + depends on B53 && SPI + help + Select to enable support for registering switches configured through SPI. + +config B53_MDIO_DRIVER + tristate "B53 MDIO connected switch driver" + depends on B53 + help + Select to enable support for registering switches configured through MDIO. + +config B53_MMAP_DRIVER + tristate "B53 MMAP connected switch driver" + depends on B53 && HAS_IOMEM + help + Select to enable support for memory-mapped switches like the BCM63XX + integrated switches. + +config B53_SRAB_DRIVER + tristate "B53 SRAB connected switch driver" + depends on B53 && HAS_IOMEM + help + Select to enable support for memory-mapped Switch Register Access + Bridge Registers (SRAB) like it is found on the BCM53010 diff --git a/drivers/net/dsa/b53/Makefile b/drivers/net/dsa/b53/Makefile new file mode 100644 index 0000000..7e6f9a8 --- /dev/null +++ b/drivers/net/dsa/b53/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_B53) += b53_common.o + +obj-$(CONFIG_B53_SPI_DRIVER) += b53_spi.o +obj-$(CONFIG_B53_MDIO_DRIVER) += b53_mdio.o +obj-$(CONFIG_B53_MMAP_DRIVER) += b53_mmap.o +obj-$(CONFIG_B53_SRAB_DRIVER) += b53_srab.o diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c new file mode 100644 index 0000000..6f0337d --- /dev/null +++ b/drivers/net/dsa/b53/b53_common.c @@ -0,0 +1,1158 @@ +/* + * B53 switch driver main logic + * + * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> + * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_data/b53.h> +#include <linux/phy.h> +#include <net/dsa.h> + +#include "b53_regs.h" +#include "b53_priv.h" + +struct b53_mib_desc { + u8 size; + u8 offset; + const char *name; +}; + +/* BCM5365 MIB counters */ +static const struct b53_mib_desc b53_mibs_65[] = { + { 8, 0x00, "TxOctets" }, + { 4, 0x08, "TxDropPkts" }, + { 4, 0x10, "TxBroadcastPkts" }, + { 4, 0x14, "TxMulticastPkts" }, + { 4, 0x18, "TxUnicastPkts" }, + { 4, 0x1c, "TxCollisions" }, + { 4, 0x20, "TxSingleCollision" }, + { 4, 0x24, "TxMultipleCollision" }, + { 4, 0x28, "TxDeferredTransmit" }, + { 4, 0x2c, "TxLateCollision" }, + { 4, 0x30, "TxExcessiveCollision" }, + { 4, 0x38, "TxPausePkts" }, + { 8, 0x44, "RxOctets" }, + { 4, 0x4c, "RxUndersizePkts" }, + { 4, 0x50, "RxPausePkts" }, + { 4, 0x54, "Pkts64Octets" }, + { 4, 0x58, "Pkts65to127Octets" }, + { 4, 0x5c, "Pkts128to255Octets" }, + { 4, 0x60, "Pkts256to511Octets" }, + { 4, 0x64, "Pkts512to1023Octets" }, + { 4, 0x68, "Pkts1024to1522Octets" }, + { 4, 0x6c, "RxOversizePkts" }, + { 4, 0x70, "RxJabbers" }, + { 4, 0x74, "RxAlignmentErrors" }, + { 4, 0x78, "RxFCSErrors" }, + { 8, 0x7c, "RxGoodOctets" }, + { 4, 0x84, "RxDropPkts" }, + { 4, 0x88, "RxUnicastPkts" }, + { 4, 0x8c, "RxMulticastPkts" }, + { 4, 0x90, "RxBroadcastPkts" }, + { 4, 0x94, "RxSAChanges" }, + { 4, 0x98, "RxFragments" }, +}; + +#define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65) + +/* BCM63xx MIB counters */ +static const struct b53_mib_desc b53_mibs_63xx[] = { + { 8, 0x00, "TxOctets" }, + { 4, 0x08, "TxDropPkts" }, + { 4, 0x0c, "TxQoSPkts" }, + { 4, 0x10, "TxBroadcastPkts" }, + { 4, 0x14, "TxMulticastPkts" }, + { 4, 0x18, "TxUnicastPkts" }, + { 4, 0x1c, "TxCollisions" }, + { 4, 0x20, "TxSingleCollision" }, + { 4, 0x24, "TxMultipleCollision" }, + { 4, 0x28, "TxDeferredTransmit" }, + { 4, 0x2c, "TxLateCollision" }, + { 4, 0x30, "TxExcessiveCollision" }, + { 4, 0x38, "TxPausePkts" }, + { 8, 0x3c, "TxQoSOctets" }, + { 8, 0x44, "RxOctets" }, + { 4, 0x4c, "RxUndersizePkts" }, + { 4, 0x50, "RxPausePkts" }, + { 4, 0x54, "Pkts64Octets" }, + { 4, 0x58, "Pkts65to127Octets" }, + { 4, 0x5c, "Pkts128to255Octets" }, + { 4, 0x60, "Pkts256to511Octets" }, + { 4, 0x64, "Pkts512to1023Octets" }, + { 4, 0x68, "Pkts1024to1522Octets" }, + { 4, 0x6c, "RxOversizePkts" }, + { 4, 0x70, "RxJabbers" }, + { 4, 0x74, "RxAlignmentErrors" }, + { 4, 0x78, "RxFCSErrors" }, + { 8, 0x7c, "RxGoodOctets" }, + { 4, 0x84, "RxDropPkts" }, + { 4, 0x88, "RxUnicastPkts" }, + { 4, 0x8c, "RxMulticastPkts" }, + { 4, 0x90, "RxBroadcastPkts" }, + { 4, 0x94, "RxSAChanges" }, + { 4, 0x98, "RxFragments" }, + { 4, 0xa0, "RxSymbolErrors" }, + { 4, 0xa4, "RxQoSPkts" }, + { 8, 0xa8, "RxQoSOctets" }, + { 4, 0xb0, "Pkts1523to2047Octets" }, + { 4, 0xb4, "Pkts2048to4095Octets" }, + { 4, 0xb8, "Pkts4096to8191Octets" }, + { 4, 0xbc, "Pkts8192to9728Octets" }, + { 4, 0xc0, "RxDiscarded" }, +}; + +#define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx) + +/* MIB counters */ +static const struct b53_mib_desc b53_mibs[] = { + { 8, 0x00, "TxOctets" }, + { 4, 0x08, "TxDropPkts" }, + { 4, 0x10, "TxBroadcastPkts" }, + { 4, 0x14, "TxMulticastPkts" }, + { 4, 0x18, "TxUnicastPkts" }, + { 4, 0x1c, "TxCollisions" }, + { 4, 0x20, "TxSingleCollision" }, + { 4, 0x24, "TxMultipleCollision" }, + { 4, 0x28, "TxDeferredTransmit" }, + { 4, 0x2c, "TxLateCollision" }, + { 4, 0x30, "TxExcessiveCollision" }, + { 4, 0x38, "TxPausePkts" }, + { 8, 0x50, "RxOctets" }, + { 4, 0x58, "RxUndersizePkts" }, + { 4, 0x5c, "RxPausePkts" }, + { 4, 0x60, "Pkts64Octets" }, + { 4, 0x64, "Pkts65to127Octets" }, + { 4, 0x68, "Pkts128to255Octets" }, + { 4, 0x6c, "Pkts256to511Octets" }, + { 4, 0x70, "Pkts512to1023Octets" }, + { 4, 0x74, "Pkts1024to1522Octets" }, + { 4, 0x78, "RxOversizePkts" }, + { 4, 0x7c, "RxJabbers" }, + { 4, 0x80, "RxAlignmentErrors" }, + { 4, 0x84, "RxFCSErrors" }, + { 8, 0x88, "RxGoodOctets" }, + { 4, 0x90, "RxDropPkts" }, + { 4, 0x94, "RxUnicastPkts" }, + { 4, 0x98, "RxMulticastPkts" }, + { 4, 0x9c, "RxBroadcastPkts" }, + { 4, 0xa0, "RxSAChanges" }, + { 4, 0xa4, "RxFragments" }, + { 4, 0xa8, "RxJumboPkts" }, + { 4, 0xac, "RxSymbolErrors" }, + { 4, 0xc0, "RxDiscarded" }, +}; + +#define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs) + +static int b53_do_vlan_op(struct b53_device *dev, u8 op) +{ + unsigned int i; + + b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op); + + for (i = 0; i < 10; i++) { + u8 vta; + + b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta); + if (!(vta & VTA_START_CMD)) + return 0; + + usleep_range(100, 200); + } + + return -EIO; +} + +static void b53_set_vlan_entry(struct b53_device *dev, u16 vid, u16 members, + u16 untag) +{ + if (is5325(dev)) { + u32 entry = 0; + + if (members) { + entry = ((untag & VA_UNTAG_MASK_25) << VA_UNTAG_S_25) | + members; + if (dev->core_rev >= 3) + entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S; + else + entry |= VA_VALID_25; + } + + b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry); + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid | + VTA_RW_STATE_WR | VTA_RW_OP_EN); + } else if (is5365(dev)) { + u16 entry = 0; + + if (members) + entry = ((untag & VA_UNTAG_MASK_65) << VA_UNTAG_S_65) | + members | VA_VALID_65; + + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry); + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid | + VTA_RW_STATE_WR | VTA_RW_OP_EN); + } else { + b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid); + b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], + (untag << VTE_UNTAG_S) | members); + + b53_do_vlan_op(dev, VTA_CMD_WRITE); + } +} + +void b53_set_forwarding(struct b53_device *dev, int enable) +{ + u8 mgmt; + + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + + if (enable) + mgmt |= SM_SW_FWD_EN; + else + mgmt &= ~SM_SW_FWD_EN; + + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); +} + +static void b53_enable_vlan(struct b53_device *dev, int enable) +{ + u8 mgmt, vc0, vc1, vc4 = 0, vc5; + + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1); + + if (is5325(dev) || is5365(dev)) { + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5); + } else if (is63xx(dev)) { + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5); + } else { + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5); + } + + mgmt &= ~SM_SW_FWD_MODE; + + if (enable) { + vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID; + vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN; + vc4 &= ~VC4_ING_VID_CHECK_MASK; + vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S; + vc5 |= VC5_DROP_VTABLE_MISS; + + if (is5325(dev)) + vc0 &= ~VC0_RESERVED_1; + + if (is5325(dev) || is5365(dev)) + vc1 |= VC1_RX_MCST_TAG_EN; + + if (!is5325(dev) && !is5365(dev)) { + if (dev->allow_vid_4095) + vc5 |= VC5_VID_FFF_EN; + else + vc5 &= ~VC5_VID_FFF_EN; + } + } else { + vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID); + vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN); + vc4 &= ~VC4_ING_VID_CHECK_MASK; + vc5 &= ~VC5_DROP_VTABLE_MISS; + + if (is5325(dev) || is5365(dev)) + vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; + else + vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S; + + if (is5325(dev) || is5365(dev)) + vc1 &= ~VC1_RX_MCST_TAG_EN; + + if (!is5325(dev) && !is5365(dev)) + vc5 &= ~VC5_VID_FFF_EN; + } + + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1); + + if (is5325(dev) || is5365(dev)) { + /* enable the high 8 bit vid check on 5325 */ + if (is5325(dev) && enable) + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, + VC3_HIGH_8BIT_EN); + else + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); + + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5); + } else if (is63xx(dev)) { + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5); + } else { + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5); + } + + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); +} + +static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100) +{ + u32 port_mask = 0; + u16 max_size = JMS_MIN_SIZE; + + if (is5325(dev) || is5365(dev)) + return -EINVAL; + + if (enable) { + port_mask = dev->enabled_ports; + max_size = JMS_MAX_SIZE; + if (allow_10_100) + port_mask |= JPM_10_100_JUMBO_EN; + } + + b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask); + return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size); +} + +static int b53_flush_arl(struct b53_device *dev) +{ + unsigned int i; + + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, + FAST_AGE_DONE | FAST_AGE_DYNAMIC | FAST_AGE_STATIC); + + for (i = 0; i < 10; i++) { + u8 fast_age_ctrl; + + b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, + &fast_age_ctrl); + + if (!(fast_age_ctrl & FAST_AGE_DONE)) + goto out; + + msleep(1); + } + + return -ETIMEDOUT; +out: + /* Only age dynamic entries (default behavior) */ + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC); + return 0; +} + +static int b53_enable_port(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct b53_device *dev = ds_to_priv(ds); + + /* Clear the Rx and Tx disable bits and set to no spanning tree */ + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0); + + return 0; +} + +static void b53_disable_port(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct b53_device *dev = ds_to_priv(ds); + u8 reg; + + /* Disable Tx/Rx for the port */ + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®); + reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE; + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); +} + +static void b53_enable_cpu_port(struct b53_device *dev) +{ + unsigned int cpu_port = dev->cpu_port; + u8 port_ctrl; + + /* BCM5325 CPU port is at 8 */ + if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25) + cpu_port = B53_CPU_PORT; + + port_ctrl = PORT_CTRL_RX_BCST_EN | + PORT_CTRL_RX_MCST_EN | + PORT_CTRL_RX_UCST_EN; + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(cpu_port), port_ctrl); +} + +static void b53_enable_mib(struct b53_device *dev) +{ + u8 gc; + + b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); + gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN); + b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); +} + +static int b53_configure_vlan(struct b53_device *dev) +{ + int i; + + /* clear all vlan entries */ + if (is5325(dev) || is5365(dev)) { + for (i = 1; i < dev->num_vlans; i++) + b53_set_vlan_entry(dev, i, 0, 0); + } else { + b53_do_vlan_op(dev, VTA_CMD_CLEAR); + } + + b53_enable_vlan(dev, false); + + b53_for_each_port(dev, i) + b53_write16(dev, B53_VLAN_PAGE, + B53_VLAN_PORT_DEF_TAG(i), 1); + + if (!is5325(dev) && !is5365(dev)) + b53_set_jumbo(dev, dev->enable_jumbo, false); + + return 0; +} + +static void b53_switch_reset_gpio(struct b53_device *dev) +{ + int gpio = dev->reset_gpio; + + if (gpio < 0) + return; + + /* Reset sequence: RESET low(50ms)->high(20ms) + */ + gpio_set_value(gpio, 0); + mdelay(50); + + gpio_set_value(gpio, 1); + mdelay(20); + + dev->current_page = 0xff; +} + +static int b53_switch_reset(struct b53_device *dev) +{ + u8 mgmt; + + b53_switch_reset_gpio(dev); + + if (is539x(dev)) { + b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83); + b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00); + } + + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + + if (!(mgmt & SM_SW_FWD_EN)) { + mgmt &= ~SM_SW_FWD_MODE; + mgmt |= SM_SW_FWD_EN; + + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + + if (!(mgmt & SM_SW_FWD_EN)) { + dev_err(dev->dev, "Failed to enable switch!\n"); + return -EINVAL; + } + } + + b53_enable_mib(dev); + + return b53_flush_arl(dev); +} + +static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg) +{ + struct b53_device *priv = ds_to_priv(ds); + u16 value = 0; + int ret; + + if (priv->ops->phy_read16) + ret = priv->ops->phy_read16(priv, addr, reg, &value); + else + ret = b53_read16(priv, B53_PORT_MII_PAGE(addr), + reg * 2, &value); + + return ret ? ret : value; +} + +static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) +{ + struct b53_device *priv = ds_to_priv(ds); + + if (priv->ops->phy_write16) + return priv->ops->phy_write16(priv, addr, reg, val); + + return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val); +} + +static int b53_reset_switch(struct b53_device *priv) +{ + /* reset vlans */ + priv->enable_jumbo = false; + + memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports); + + return b53_switch_reset(priv); +} + +static int b53_apply_config(struct b53_device *priv) +{ + /* disable switching */ + b53_set_forwarding(priv, 0); + + b53_configure_vlan(priv); + + /* enable switching */ + b53_set_forwarding(priv, 1); + + return 0; +} + +static void b53_reset_mib(struct b53_device *priv) +{ + u8 gc; + + b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); + + b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB); + msleep(1); + b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB); + msleep(1); +} + +static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev) +{ + if (is5365(dev)) + return b53_mibs_65; + else if (is63xx(dev)) + return b53_mibs_63xx; + else + return b53_mibs; +} + +static unsigned int b53_get_mib_size(struct b53_device *dev) +{ + if (is5365(dev)) + return B53_MIBS_65_SIZE; + else if (is63xx(dev)) + return B53_MIBS_63XX_SIZE; + else + return B53_MIBS_SIZE; +} + +static void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data) +{ + struct b53_device *dev = ds_to_priv(ds); + const struct b53_mib_desc *mibs = b53_get_mib(dev); + unsigned int mib_size = b53_get_mib_size(dev); + unsigned int i; + + for (i = 0; i < mib_size; i++) + memcpy(data + i * ETH_GSTRING_LEN, + mibs[i].name, ETH_GSTRING_LEN); +} + +static void b53_get_ethtool_stats(struct dsa_switch *ds, int port, + uint64_t *data) +{ + struct b53_device *dev = ds_to_priv(ds); + const struct b53_mib_desc *mibs = b53_get_mib(dev); + unsigned int mib_size = b53_get_mib_size(dev); + const struct b53_mib_desc *s; + unsigned int i; + u64 val = 0; + + if (is5365(dev) && port == 5) + port = 8; + + mutex_lock(&dev->stats_mutex); + + for (i = 0; i < mib_size; i++) { + s = &mibs[i]; + + if (mibs->size == 8) { + b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val); + } else { + u32 val32; + + b53_read32(dev, B53_MIB_PAGE(port), s->offset, + &val32); + val = val32; + } + data[i] = (u64)val; + } + + mutex_unlock(&dev->stats_mutex); +} + +static int b53_get_sset_count(struct dsa_switch *ds) +{ + struct b53_device *dev = ds_to_priv(ds); + + return b53_get_mib_size(dev); +} + +static int b53_set_addr(struct dsa_switch *ds, u8 *addr) +{ + return 0; +} + +static int b53_setup(struct dsa_switch *ds) +{ + struct b53_device *dev = ds_to_priv(ds); + unsigned int port; + int ret; + + ret = b53_reset_switch(dev); + if (ret) { + dev_err(ds->dev, "failed to reset switch\n"); + return ret; + } + + b53_reset_mib(dev); + + ret = b53_apply_config(dev); + if (ret) + dev_err(ds->dev, "failed to apply configuration\n"); + + for (port = 0; port < dev->num_ports; port++) { + if (BIT(port) & ds->enabled_port_mask) + b53_enable_port(ds, port, NULL); + else if (dsa_is_cpu_port(ds, port)) + b53_enable_cpu_port(dev); + else + b53_disable_port(ds, port, NULL); + } + + return ret; +} + +static void b53_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct b53_device *dev = ds_to_priv(ds); + u8 rgmii_ctrl = 0, reg = 0, off; + + if (!phy_is_pseudo_fixed_link(phydev)) + return; + + /* Override the port settings */ + if (port == dev->cpu_port) { + off = B53_PORT_OVERRIDE_CTRL; + reg = PORT_OVERRIDE_EN; + } else { + off = B53_GMII_PORT_OVERRIDE_CTRL(port); + reg = GMII_PO_EN; + } + + /* Set the link UP */ + if (phydev->link) + reg |= PORT_OVERRIDE_LINK; + + if (phydev->duplex == DUPLEX_FULL) + reg |= PORT_OVERRIDE_FULL_DUPLEX; + + switch (phydev->speed) { + case 2000: + reg |= PORT_OVERRIDE_SPEED_2000M; + /* fallthrough */ + case SPEED_1000: + reg |= PORT_OVERRIDE_SPEED_1000M; + break; + case SPEED_100: + reg |= PORT_OVERRIDE_SPEED_100M; + break; + case SPEED_10: + reg |= PORT_OVERRIDE_SPEED_10M; + break; + default: + dev_err(ds->dev, "unknown speed: %d\n", phydev->speed); + return; + } + + /* Enable flow control on BCM5301x's CPU port */ + if (is5301x(dev) && port == dev->cpu_port) + reg |= PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW; + + if (phydev->pause) { + if (phydev->asym_pause) + reg |= PORT_OVERRIDE_TX_FLOW; + reg |= PORT_OVERRIDE_RX_FLOW; + } + + b53_write8(dev, B53_CTRL_PAGE, off, reg); + + if (is531x5(dev) && phy_interface_is_rgmii(phydev)) { + if (port == 8) + off = B53_RGMII_CTRL_IMP; + else + off = B53_RGMII_CTRL_P(port); + + /* Configure the port RGMII clock delay by DLL disabled and + * tx_clk aligned timing (restoring to reset defaults) + */ + b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC | + RGMII_CTRL_TIMING_SEL); + + /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make + * sure that we enable the port TX clock internal delay to + * account for this internal delay that is inserted, otherwise + * the switch won't be able to receive correctly. + * + * PHY_INTERFACE_MODE_RGMII means that we are not introducing + * any delay neither on transmission nor reception, so the + * BCM53125 must also be configured accordingly to account for + * the lack of delay and introduce + * + * The BCM53125 switch has its RX clock and TX clock control + * swapped, hence the reason why we modify the TX clock path in + * the "RGMII" case + */ + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + rgmii_ctrl |= RGMII_CTRL_DLL_TXC; + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) + rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC; + rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; + b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); + + dev_info(ds->dev, "Configured port %d for %s\n", port, + phy_modes(phydev->interface)); + } + + /* configure MII port if necessary */ + if (is5325(dev)) { + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + ®); + + /* reverse mii needs to be enabled */ + if (!(reg & PORT_OVERRIDE_RV_MII_25)) { + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + reg | PORT_OVERRIDE_RV_MII_25); + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + ®); + + if (!(reg & PORT_OVERRIDE_RV_MII_25)) { + dev_err(ds->dev, + "Failed to enable reverse MII mode\n"); + return; + } + } + } else if (is5301x(dev)) { + if (port != dev->cpu_port) { + u8 po_reg = B53_GMII_PORT_OVERRIDE_CTRL(dev->cpu_port); + u8 gmii_po; + + b53_read8(dev, B53_CTRL_PAGE, po_reg, &gmii_po); + gmii_po |= GMII_PO_LINK | + GMII_PO_RX_FLOW | + GMII_PO_TX_FLOW | + GMII_PO_EN | + GMII_PO_SPEED_2000M; + b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po); + } + } +} + +static struct dsa_switch_driver b53_switch_ops = { + .tag_protocol = DSA_TAG_PROTO_NONE, + .setup = b53_setup, + .set_addr = b53_set_addr, + .get_strings = b53_get_strings, + .get_ethtool_stats = b53_get_ethtool_stats, + .get_sset_count = b53_get_sset_count, + .phy_read = b53_phy_read16, + .phy_write = b53_phy_write16, + .adjust_link = b53_adjust_link, + .port_enable = b53_enable_port, + .port_disable = b53_disable_port, +}; + +struct b53_chip_data { + u32 chip_id; + const char *dev_name; + u16 vlans; + u16 enabled_ports; + u8 cpu_port; + u8 vta_regs[3]; + u8 duplex_reg; + u8 jumbo_pm_reg; + u8 jumbo_size_reg; +}; + +#define B53_VTA_REGS \ + { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY } +#define B53_VTA_REGS_9798 \ + { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 } +#define B53_VTA_REGS_63XX \ + { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX } + +static const struct b53_chip_data b53_switch_chips[] = { + { + .chip_id = BCM5325_DEVICE_ID, + .dev_name = "BCM5325", + .vlans = 16, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT_25, + .duplex_reg = B53_DUPLEX_STAT_FE, + }, + { + .chip_id = BCM5365_DEVICE_ID, + .dev_name = "BCM5365", + .vlans = 256, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT_25, + .duplex_reg = B53_DUPLEX_STAT_FE, + }, + { + .chip_id = BCM5395_DEVICE_ID, + .dev_name = "BCM5395", + .vlans = 4096, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM5397_DEVICE_ID, + .dev_name = "BCM5397", + .vlans = 4096, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS_9798, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM5398_DEVICE_ID, + .dev_name = "BCM5398", + .vlans = 4096, + .enabled_ports = 0x7f, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS_9798, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53115_DEVICE_ID, + .dev_name = "BCM53115", + .vlans = 4096, + .enabled_ports = 0x1f, + .vta_regs = B53_VTA_REGS, + .cpu_port = B53_CPU_PORT, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53125_DEVICE_ID, + .dev_name = "BCM53125", + .vlans = 4096, + .enabled_ports = 0xff, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53128_DEVICE_ID, + .dev_name = "BCM53128", + .vlans = 4096, + .enabled_ports = 0x1ff, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM63XX_DEVICE_ID, + .dev_name = "BCM63xx", + .vlans = 4096, + .enabled_ports = 0, /* pdata must provide them */ + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS_63XX, + .duplex_reg = B53_DUPLEX_STAT_63XX, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, + }, + { + .chip_id = BCM53010_DEVICE_ID, + .dev_name = "BCM53010", + .vlans = 4096, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53011_DEVICE_ID, + .dev_name = "BCM53011", + .vlans = 4096, + .enabled_ports = 0x1bf, + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53012_DEVICE_ID, + .dev_name = "BCM53012", + .vlans = 4096, + .enabled_ports = 0x1bf, + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53018_DEVICE_ID, + .dev_name = "BCM53018", + .vlans = 4096, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53019_DEVICE_ID, + .dev_name = "BCM53019", + .vlans = 4096, + .enabled_ports = 0x1f, + .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, +}; + +static int b53_switch_init(struct b53_device *dev) +{ + struct dsa_switch *ds = dev->ds; + unsigned int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) { + const struct b53_chip_data *chip = &b53_switch_chips[i]; + + if (chip->chip_id == dev->chip_id) { + if (!dev->enabled_ports) + dev->enabled_ports = chip->enabled_ports; + dev->name = chip->dev_name; + dev->duplex_reg = chip->duplex_reg; + dev->vta_regs[0] = chip->vta_regs[0]; + dev->vta_regs[1] = chip->vta_regs[1]; + dev->vta_regs[2] = chip->vta_regs[2]; + dev->jumbo_pm_reg = chip->jumbo_pm_reg; + ds->drv = &b53_switch_ops; + dev->cpu_port = chip->cpu_port; + dev->num_vlans = chip->vlans; + break; + } + } + + /* check which BCM5325x version we have */ + if (is5325(dev)) { + u8 vc4; + + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); + + /* check reserved bits */ + switch (vc4 & 3) { + case 1: + /* BCM5325E */ + break; + case 3: + /* BCM5325F - do not use port 4 */ + dev->enabled_ports &= ~BIT(4); + break; + default: +/* On the BCM47XX SoCs this is the supported internal switch.*/ +#ifndef CONFIG_BCM47XX + /* BCM5325M */ + return -EINVAL; +#else + break; +#endif + } + } else if (dev->chip_id == BCM53115_DEVICE_ID) { + u64 strap_value; + + b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value); + /* use second IMP port if GMII is enabled */ + if (strap_value & SV_GMII_CTRL_115) + dev->cpu_port = 5; + } + + /* cpu port is always last */ + dev->num_ports = dev->cpu_port + 1; + dev->enabled_ports |= BIT(dev->cpu_port); + + dev->ports = devm_kzalloc(dev->dev, + sizeof(struct b53_port) * dev->num_ports, + GFP_KERNEL); + if (!dev->ports) + return -ENOMEM; + + dev->reset_gpio = b53_switch_get_reset_gpio(dev); + if (dev->reset_gpio >= 0) { + ret = devm_gpio_request_one(dev->dev, dev->reset_gpio, + GPIOF_OUT_INIT_HIGH, "robo_reset"); + if (ret) + return ret; + } + + return 0; +} + +struct b53_device *b53_switch_alloc(struct device *base, struct b53_io_ops *ops, + void *priv) +{ + struct dsa_switch *ds; + struct b53_device *dev; + + ds = devm_kzalloc(base, sizeof(*ds) + sizeof(*dev), GFP_KERNEL); + if (!ds) + return NULL; + + dev = (struct b53_device *)(ds + 1); + + ds->priv = dev; + ds->dev = base; + dev->dev = base; + + dev->ds = ds; + dev->priv = priv; + dev->ops = ops; + mutex_init(&dev->reg_mutex); + mutex_init(&dev->stats_mutex); + + return dev; +} +EXPORT_SYMBOL(b53_switch_alloc); + +int b53_switch_detect(struct b53_device *dev) +{ + u32 id32; + u16 tmp; + u8 id8; + int ret; + + ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8); + if (ret) + return ret; + + switch (id8) { + case 0: + /* BCM5325 and BCM5365 do not have this register so reads + * return 0. But the read operation did succeed, so assume this + * is one of them. + * + * Next check if we can write to the 5325's VTA register; for + * 5365 it is read only. + */ + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf); + b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp); + + if (tmp == 0xf) + dev->chip_id = BCM5325_DEVICE_ID; + else + dev->chip_id = BCM5365_DEVICE_ID; + break; + case BCM5395_DEVICE_ID: + case BCM5397_DEVICE_ID: + case BCM5398_DEVICE_ID: + dev->chip_id = id8; + break; + default: + ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32); + if (ret) + return ret; + + switch (id32) { + case BCM53115_DEVICE_ID: + case BCM53125_DEVICE_ID: + case BCM53128_DEVICE_ID: + case BCM53010_DEVICE_ID: + case BCM53011_DEVICE_ID: + case BCM53012_DEVICE_ID: + case BCM53018_DEVICE_ID: + case BCM53019_DEVICE_ID: + dev->chip_id = id32; + break; + default: + pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n", + id8, id32); + return -ENODEV; + } + } + + if (dev->chip_id == BCM5325_DEVICE_ID) + return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25, + &dev->core_rev); + else + return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID, + &dev->core_rev); +} +EXPORT_SYMBOL(b53_switch_detect); + +int b53_switch_register(struct b53_device *dev) +{ + int ret; + + if (dev->pdata) { + dev->chip_id = dev->pdata->chip_id; + dev->enabled_ports = dev->pdata->enabled_ports; + } + + if (!dev->chip_id && b53_switch_detect(dev)) + return -EINVAL; + + ret = b53_switch_init(dev); + if (ret) + return ret; + + pr_info("found switch: %s, rev %i\n", dev->name, dev->core_rev); + + return dsa_register_switch(dev->ds, dev->ds->dev->of_node); +} +EXPORT_SYMBOL(b53_switch_register); + +MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>"); +MODULE_DESCRIPTION("B53 switch library"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c new file mode 100644 index 0000000..c6cf7cf --- /dev/null +++ b/drivers/net/dsa/b53/b53_mdio.c @@ -0,0 +1,381 @@ +/* + * B53 register access through MII registers + * + * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/phy.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/brcmphy.h> +#include <linux/rtnetlink.h> +#include <net/dsa.h> + +#include "b53_priv.h" + +/* MII registers */ +#define REG_MII_PAGE 0x10 /* MII Page register */ +#define REG_MII_ADDR 0x11 /* MII Address register */ +#define REG_MII_DATA0 0x18 /* MII Data register 0 */ +#define REG_MII_DATA1 0x19 /* MII Data register 1 */ +#define REG_MII_DATA2 0x1a /* MII Data register 2 */ +#define REG_MII_DATA3 0x1b /* MII Data register 3 */ + +#define REG_MII_PAGE_ENABLE BIT(0) +#define REG_MII_ADDR_WRITE BIT(0) +#define REG_MII_ADDR_READ BIT(1) + +static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op) +{ + int i; + u16 v; + int ret; + struct mii_bus *bus = dev->priv; + + if (dev->current_page != page) { + /* set page number */ + v = (page << 8) | REG_MII_PAGE_ENABLE; + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_PAGE, v); + if (ret) + return ret; + dev->current_page = page; + } + + /* set register address */ + v = (reg << 8) | op; + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_ADDR, v); + if (ret) + return ret; + + /* check if operation completed */ + for (i = 0; i < 5; ++i) { + v = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_ADDR); + if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ))) + break; + usleep_range(10, 100); + } + + if (WARN_ON(i == 5)) + return -EIO; + + return 0; +} + +static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0) & 0xff; + + return 0; +} + +static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0); + + return 0; +} + +static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0); + *val |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA1) << 16; + + return 0; +} + +static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + struct mii_bus *bus = dev->priv; + u64 temp = 0; + int i; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + for (i = 2; i >= 0; i--) { + temp <<= 16; + temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i); + } + + *val = temp; + + return 0; +} + +static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + struct mii_bus *bus = dev->priv; + u64 temp = 0; + int i; + int ret; + + ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); + if (ret) + return ret; + + for (i = 3; i >= 0; i--) { + temp <<= 16; + temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i); + } + + *val = temp; + + return 0; +} + +static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0, value); + if (ret) + return ret; + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg, + u16 value) +{ + struct mii_bus *bus = dev->priv; + int ret; + + ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0, value); + if (ret) + return ret; + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg, + u32 value) +{ + struct mii_bus *bus = dev->priv; + unsigned int i; + u32 temp = value; + + for (i = 0; i < 2; i++) { + int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i, + temp & 0xffff); + if (ret) + return ret; + temp >>= 16; + } + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + struct mii_bus *bus = dev->priv; + unsigned int i; + u64 temp = value; + + for (i = 0; i < 3; i++) { + int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i, + temp & 0xffff); + if (ret) + return ret; + temp >>= 16; + } + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + struct mii_bus *bus = dev->priv; + unsigned int i; + u64 temp = value; + + for (i = 0; i < 4; i++) { + int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, + REG_MII_DATA0 + i, + temp & 0xffff); + if (ret) + return ret; + temp >>= 16; + } + + return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); +} + +static int b53_mdio_phy_read16(struct b53_device *dev, int addr, int reg, + u16 *value) +{ + struct mii_bus *bus = dev->priv; + + *value = mdiobus_read_nested(bus, addr, reg); + + return 0; +} + +static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg, + u16 value) +{ + struct mii_bus *bus = dev->bus; + + return mdiobus_write_nested(bus, addr, reg, value); +} + +static struct b53_io_ops b53_mdio_ops = { + .read8 = b53_mdio_read8, + .read16 = b53_mdio_read16, + .read32 = b53_mdio_read32, + .read48 = b53_mdio_read48, + .read64 = b53_mdio_read64, + .write8 = b53_mdio_write8, + .write16 = b53_mdio_write16, + .write32 = b53_mdio_write32, + .write48 = b53_mdio_write48, + .write64 = b53_mdio_write64, + .phy_read16 = b53_mdio_phy_read16, + .phy_write16 = b53_mdio_phy_write16, +}; + +#define B53_BRCM_OUI_1 0x0143bc00 +#define B53_BRCM_OUI_2 0x03625c00 +#define B53_BRCM_OUI_3 0x00406000 + +static int b53_mdio_probe(struct mdio_device *mdiodev) +{ + struct b53_device *dev; + u32 phy_id; + int ret; + + /* allow the generic PHY driver to take over the non-management MDIO + * addresses + */ + if (mdiodev->addr != BRCM_PSEUDO_PHY_ADDR && mdiodev->addr != 0) { + dev_err(&mdiodev->dev, "leaving address %d to PHY\n", + mdiodev->addr); + return -ENODEV; + } + + /* read the first port's id */ + phy_id = mdiobus_read(mdiodev->bus, 0, 2) << 16; + phy_id |= mdiobus_read(mdiodev->bus, 0, 3); + + /* BCM5325, BCM539x (OUI_1) + * BCM53125, BCM53128 (OUI_2) + * BCM5365 (OUI_3) + */ + if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 && + (phy_id & 0xfffffc00) != B53_BRCM_OUI_2 && + (phy_id & 0xfffffc00) != B53_BRCM_OUI_3) { + dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id); + return -ENODEV; + } + + dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus); + if (!dev) + return -ENOMEM; + + /* we don't use page 0xff, so force a page set */ + dev->current_page = 0xff; + dev->bus = mdiodev->bus; + + dev_set_drvdata(&mdiodev->dev, dev); + + ret = b53_switch_register(dev); + if (ret) { + dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret); + return ret; + } + + return ret; +} + +static void b53_mdio_remove(struct mdio_device *mdiodev) +{ + struct b53_device *dev = dev_get_drvdata(&mdiodev->dev); + struct dsa_switch *ds = dev->ds; + + dsa_unregister_switch(ds); +} + +static const struct of_device_id b53_of_match[] = { + { .compatible = "brcm,bcm5325" }, + { .compatible = "brcm,bcm53115" }, + { .compatible = "brcm,bcm53125" }, + { .compatible = "brcm,bcm53128" }, + { .compatible = "brcm,bcm5365" }, + { .compatible = "brcm,bcm5395" }, + { .compatible = "brcm,bcm5397" }, + { .compatible = "brcm,bcm5398" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, b53_of_match); + +static struct mdio_driver b53_mdio_driver = { + .probe = b53_mdio_probe, + .remove = b53_mdio_remove, + .mdiodrv.driver = { + .name = "bcm53xx", + .of_match_table = b53_of_match, + }, +}; + +static int __init b53_mdio_driver_register(void) +{ + return mdio_driver_register(&b53_mdio_driver); +} +module_init(b53_mdio_driver_register); + +static void __exit b53_mdio_driver_unregister(void) +{ + mdio_driver_unregister(&b53_mdio_driver); +} +module_exit(b53_mdio_driver_unregister); + +MODULE_DESCRIPTION("B53 MDIO access driver"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c new file mode 100644 index 0000000..f115ee2 --- /dev/null +++ b/drivers/net/dsa/b53/b53_mmap.c @@ -0,0 +1,260 @@ +/* + * B53 register access through memory mapped registers + * + * Copyright (C) 2012-2013 Jonas Gorski <jogo@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/kconfig.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/platform_data/b53.h> + +#include "b53_priv.h" + +struct b53_mmap_priv { + void __iomem *regs; +}; + +static int b53_mmap_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) +{ + u8 __iomem *regs = dev->priv; + + *val = readb(regs + (page << 8) + reg); + + return 0; +} + +static int b53_mmap_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) +{ + u8 __iomem *regs = dev->priv; + + if (WARN_ON(reg % 2)) + return -EINVAL; + + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata && + dev->pdata->big_endian) + *val = __raw_readw(regs + (page << 8) + reg); + else + *val = readw(regs + (page << 8) + reg); + + return 0; +} + +static int b53_mmap_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val) +{ + u8 __iomem *regs = dev->priv; + + if (WARN_ON(reg % 4)) + return -EINVAL; + + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata && + dev->pdata->big_endian) + *val = __raw_readl(regs + (page << 8) + reg); + else + *val = readl(regs + (page << 8) + reg); + + return 0; +} + +static int b53_mmap_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + if (WARN_ON(reg % 2)) + return -EINVAL; + + if (reg % 4) { + u16 lo; + u32 hi; + + b53_mmap_read16(dev, page, reg, &lo); + b53_mmap_read32(dev, page, reg + 2, &hi); + + *val = ((u64)hi << 16) | lo; + } else { + u32 lo; + u16 hi; + + b53_mmap_read32(dev, page, reg, &lo); + b53_mmap_read16(dev, page, reg + 4, &hi); + + *val = ((u64)hi << 32) | lo; + } + + return 0; +} + +static int b53_mmap_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + u32 hi, lo; + + if (WARN_ON(reg % 4)) + return -EINVAL; + + b53_mmap_read32(dev, page, reg, &lo); + b53_mmap_read32(dev, page, reg + 4, &hi); + + *val = ((u64)hi << 32) | lo; + + return 0; +} + +static int b53_mmap_write8(struct b53_device *dev, u8 page, u8 reg, u8 value) +{ + u8 __iomem *regs = dev->priv; + + writeb(value, regs + (page << 8) + reg); + + return 0; +} + +static int b53_mmap_write16(struct b53_device *dev, u8 page, u8 reg, + u16 value) +{ + u8 __iomem *regs = dev->priv; + + if (WARN_ON(reg % 2)) + return -EINVAL; + + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata && + dev->pdata->big_endian) + __raw_writew(value, regs + (page << 8) + reg); + else + writew(value, regs + (page << 8) + reg); + + return 0; +} + +static int b53_mmap_write32(struct b53_device *dev, u8 page, u8 reg, + u32 value) +{ + u8 __iomem *regs = dev->priv; + + if (WARN_ON(reg % 4)) + return -EINVAL; + + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata && + dev->pdata->big_endian) + __raw_writel(value, regs + (page << 8) + reg); + else + writel(value, regs + (page << 8) + reg); + + return 0; +} + +static int b53_mmap_write48(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + if (WARN_ON(reg % 2)) + return -EINVAL; + + if (reg % 4) { + u32 hi = (u32)(value >> 16); + u16 lo = (u16)value; + + b53_mmap_write16(dev, page, reg, lo); + b53_mmap_write32(dev, page, reg + 2, hi); + } else { + u16 hi = (u16)(value >> 32); + u32 lo = (u32)value; + + b53_mmap_write32(dev, page, reg, lo); + b53_mmap_write16(dev, page, reg + 4, hi); + } + + return 0; +} + +static int b53_mmap_write64(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + u32 hi, lo; + + hi = upper_32_bits(value); + lo = lower_32_bits(value); + + if (WARN_ON(reg % 4)) + return -EINVAL; + + b53_mmap_write32(dev, page, reg, lo); + b53_mmap_write32(dev, page, reg + 4, hi); + + return 0; +} + +static struct b53_io_ops b53_mmap_ops = { + .read8 = b53_mmap_read8, + .read16 = b53_mmap_read16, + .read32 = b53_mmap_read32, + .read48 = b53_mmap_read48, + .read64 = b53_mmap_read64, + .write8 = b53_mmap_write8, + .write16 = b53_mmap_write16, + .write32 = b53_mmap_write32, + .write48 = b53_mmap_write48, + .write64 = b53_mmap_write64, +}; + +static int b53_mmap_probe(struct platform_device *pdev) +{ + struct b53_platform_data *pdata = pdev->dev.platform_data; + struct b53_device *dev; + + if (!pdata) + return -EINVAL; + + dev = b53_switch_alloc(&pdev->dev, &b53_mmap_ops, pdata->regs); + if (!dev) + return -ENOMEM; + + if (pdata) + dev->pdata = pdata; + + platform_set_drvdata(pdev, dev); + + return b53_switch_register(dev); +} + +static int b53_mmap_remove(struct platform_device *pdev) +{ + struct b53_device *dev = platform_get_drvdata(pdev); + + if (dev) + b53_switch_remove(dev); + + return 0; +} + +static const struct of_device_id b53_mmap_of_table[] = { + { .compatible = "brcm,bcm3384-switch" }, + { .compatible = "brcm,bcm6328-switch" }, + { .compatible = "brcm,bcm6368-switch" }, + { .compatible = "brcm,bcm63xx-switch" }, + { /* sentinel */ }, +}; + +static struct platform_driver b53_mmap_driver = { + .probe = b53_mmap_probe, + .remove = b53_mmap_remove, + .driver = { + .name = "b53-switch", + .of_match_table = b53_mmap_of_table, + }, +}; + +module_platform_driver(b53_mmap_driver); +MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>"); +MODULE_DESCRIPTION("B53 MMAP access driver"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h new file mode 100644 index 0000000..c484415 --- /dev/null +++ b/drivers/net/dsa/b53/b53_priv.h @@ -0,0 +1,322 @@ +/* + * B53 common definitions + * + * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __B53_PRIV_H +#define __B53_PRIV_H + +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/phy.h> +#include <net/dsa.h> + +struct b53_device; + +struct b53_io_ops { + int (*read8)(struct b53_device *dev, u8 page, u8 reg, u8 *value); + int (*read16)(struct b53_device *dev, u8 page, u8 reg, u16 *value); + int (*read32)(struct b53_device *dev, u8 page, u8 reg, u32 *value); + int (*read48)(struct b53_device *dev, u8 page, u8 reg, u64 *value); + int (*read64)(struct b53_device *dev, u8 page, u8 reg, u64 *value); + int (*write8)(struct b53_device *dev, u8 page, u8 reg, u8 value); + int (*write16)(struct b53_device *dev, u8 page, u8 reg, u16 value); + int (*write32)(struct b53_device *dev, u8 page, u8 reg, u32 value); + int (*write48)(struct b53_device *dev, u8 page, u8 reg, u64 value); + int (*write64)(struct b53_device *dev, u8 page, u8 reg, u64 value); + int (*phy_read16)(struct b53_device *dev, int addr, int reg, u16 *value); + int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value); +}; + +enum { + BCM5325_DEVICE_ID = 0x25, + BCM5365_DEVICE_ID = 0x65, + BCM5395_DEVICE_ID = 0x95, + BCM5397_DEVICE_ID = 0x97, + BCM5398_DEVICE_ID = 0x98, + BCM53115_DEVICE_ID = 0x53115, + BCM53125_DEVICE_ID = 0x53125, + BCM53128_DEVICE_ID = 0x53128, + BCM63XX_DEVICE_ID = 0x6300, + BCM53010_DEVICE_ID = 0x53010, + BCM53011_DEVICE_ID = 0x53011, + BCM53012_DEVICE_ID = 0x53012, + BCM53018_DEVICE_ID = 0x53018, + BCM53019_DEVICE_ID = 0x53019, +}; + +#define B53_N_PORTS 9 +#define B53_N_PORTS_25 6 + +struct b53_port { +}; + +struct b53_device { + struct dsa_switch *ds; + struct b53_platform_data *pdata; + const char *name; + + struct mutex reg_mutex; + struct mutex stats_mutex; + const struct b53_io_ops *ops; + + /* chip specific data */ + u32 chip_id; + u8 core_rev; + u8 vta_regs[3]; + u8 duplex_reg; + u8 jumbo_pm_reg; + u8 jumbo_size_reg; + int reset_gpio; + + /* used ports mask */ + u16 enabled_ports; + unsigned int cpu_port; + + /* connect specific data */ + u8 current_page; + struct device *dev; + + /* Master MDIO bus we got probed from */ + struct mii_bus *bus; + + /* Slave MDIO bus we created */ + struct mii_bus *slave_bus; + void *priv; + + /* run time configuration */ + unsigned enable_jumbo:1; + unsigned allow_vid_4095:1; + unsigned int num_vlans; + unsigned int num_ports; + struct b53_port *ports; +}; + +#define b53_for_each_port(dev, i) \ + for (i = 0; i < B53_N_PORTS; i++) \ + if (dev->enabled_ports & BIT(i)) + + +static inline int is5325(struct b53_device *dev) +{ + return dev->chip_id == BCM5325_DEVICE_ID; +} + +static inline int is5365(struct b53_device *dev) +{ +#ifdef CONFIG_BCM47XX + return dev->chip_id == BCM5365_DEVICE_ID; +#else + return 0; +#endif +} + +static inline int is5397_98(struct b53_device *dev) +{ + return dev->chip_id == BCM5397_DEVICE_ID || + dev->chip_id == BCM5398_DEVICE_ID; +} + +static inline int is539x(struct b53_device *dev) +{ + return dev->chip_id == BCM5395_DEVICE_ID || + dev->chip_id == BCM5397_DEVICE_ID || + dev->chip_id == BCM5398_DEVICE_ID; +} + +static inline int is531x5(struct b53_device *dev) +{ + return dev->chip_id == BCM53115_DEVICE_ID || + dev->chip_id == BCM53125_DEVICE_ID || + dev->chip_id == BCM53128_DEVICE_ID; +} + +static inline int is63xx(struct b53_device *dev) +{ +#ifdef CONFIG_BCM63XX + return dev->chip_id == BCM63XX_DEVICE_ID; +#else + return 0; +#endif +} + +static inline int is5301x(struct b53_device *dev) +{ + return dev->chip_id == BCM53010_DEVICE_ID || + dev->chip_id == BCM53011_DEVICE_ID || + dev->chip_id == BCM53012_DEVICE_ID || + dev->chip_id == BCM53018_DEVICE_ID || + dev->chip_id == BCM53019_DEVICE_ID; +} + +#define B53_CPU_PORT_25 5 +#define B53_CPU_PORT 8 + +static inline int is_cpu_port(struct b53_device *dev, int port) +{ + return dev->cpu_port; +} + +struct b53_device *b53_switch_alloc(struct device *base, struct b53_io_ops *ops, + void *priv); + +int b53_switch_detect(struct b53_device *dev); + +int b53_switch_register(struct b53_device *dev); + +static inline void b53_switch_remove(struct b53_device *dev) +{ + dsa_unregister_switch(dev->ds); +} + +static inline int b53_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) +{ + int ret; + + mutex_lock(&dev->reg_mutex); + ret = dev->ops->read8(dev, page, reg, val); + mutex_unlock(&dev->reg_mutex); + + return ret; +} + +static inline int b53_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) +{ + int ret; + + mutex_lock(&dev->reg_mutex); + ret = dev->ops->read16(dev, page, reg, val); + mutex_unlock(&dev->reg_mutex); + + return ret; +} + +static inline int b53_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val) +{ + int ret; + + mutex_lock(&dev->reg_mutex); + ret = dev->ops->read32(dev, page, reg, val); + mutex_unlock(&dev->reg_mutex); + + return ret; +} + +static inline int b53_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + int ret; + + mutex_lock(&dev->reg_mutex); + ret = dev->ops->read48(dev, page, reg, val); + mutex_unlock(&dev->reg_mutex); + + return ret; +} + +static inline int b53_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + int ret; + + mutex_lock(&dev->reg_mutex); + ret = dev->ops->read64(dev, page, reg, val); + mutex_unlock(&dev->reg_mutex); + + return ret; +} + +static inline int b53_write8(struct b53_device *dev, u8 page, u8 reg, u8 value) +{ + int ret; + + mutex_lock(&dev->reg_mutex); + ret = dev->ops->write8(dev, page, reg, value); + mutex_unlock(&dev->reg_mutex); + + return ret; +} + +static inline int b53_write16(struct b53_device *dev, u8 page, u8 reg, + u16 value) +{ + int ret; + + mutex_lock(&dev->reg_mutex); + ret = dev->ops->write16(dev, page, reg, value); + mutex_unlock(&dev->reg_mutex); + + return ret; +} + +static inline int b53_write32(struct b53_device *dev, u8 page, u8 reg, + u32 value) +{ + int ret; + + mutex_lock(&dev->reg_mutex); + ret = dev->ops->write32(dev, page, reg, value); + mutex_unlock(&dev->reg_mutex); + + return ret; +} + +static inline int b53_write48(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + int ret; + + mutex_lock(&dev->reg_mutex); + ret = dev->ops->write48(dev, page, reg, value); + mutex_unlock(&dev->reg_mutex); + + return ret; +} + +static inline int b53_write64(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + int ret; + + mutex_lock(&dev->reg_mutex); + ret = dev->ops->write64(dev, page, reg, value); + mutex_unlock(&dev->reg_mutex); + + return ret; +} + +#ifdef CONFIG_BCM47XX + +#include <linux/version.h> +#include <linux/bcm47xx_nvram.h> +#include <bcm47xx_board.h> +static inline int b53_switch_get_reset_gpio(struct b53_device *dev) +{ + enum bcm47xx_board board = bcm47xx_board_get(); + + switch (board) { + case BCM47XX_BOARD_LINKSYS_WRT300NV11: + case BCM47XX_BOARD_LINKSYS_WRT310NV1: + return 8; + default: + return bcm47xx_nvram_gpio_pin("robo_reset"); + } +} +#else +static inline int b53_switch_get_reset_gpio(struct b53_device *dev) +{ + return -ENOENT; +} +#endif +#endif diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h new file mode 100644 index 0000000..ccf8af7 --- /dev/null +++ b/drivers/net/dsa/b53/b53_regs.h @@ -0,0 +1,358 @@ +/* + * B53 register definitions + * + * Copyright (C) 2004 Broadcom Corporation + * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __B53_REGS_H +#define __B53_REGS_H + +/* Management Port (SMP) Page offsets */ +#define B53_CTRL_PAGE 0x00 /* Control */ +#define B53_STAT_PAGE 0x01 /* Status */ +#define B53_MGMT_PAGE 0x02 /* Management Mode */ +#define B53_MIB_AC_PAGE 0x03 /* MIB Autocast */ +#define B53_ARLCTRL_PAGE 0x04 /* ARL Control */ +#define B53_ARLIO_PAGE 0x05 /* ARL Access */ +#define B53_FRAMEBUF_PAGE 0x06 /* Management frame access */ +#define B53_MEM_ACCESS_PAGE 0x08 /* Memory access */ + +/* PHY Registers */ +#define B53_PORT_MII_PAGE(i) (0x10 + (i)) /* Port i MII Registers */ +#define B53_IM_PORT_PAGE 0x18 /* Inverse MII Port (to EMAC) */ +#define B53_ALL_PORT_PAGE 0x19 /* All ports MII (broadcast) */ + +/* MIB registers */ +#define B53_MIB_PAGE(i) (0x20 + (i)) + +/* Quality of Service (QoS) Registers */ +#define B53_QOS_PAGE 0x30 + +/* Port VLAN Page */ +#define B53_PVLAN_PAGE 0x31 + +/* VLAN Registers */ +#define B53_VLAN_PAGE 0x34 + +/* Jumbo Frame Registers */ +#define B53_JUMBO_PAGE 0x40 + +/* CFP Configuration Registers Page */ +#define B53_CFP_PAGE 0xa1 + +/************************************************************************* + * Control Page registers + *************************************************************************/ + +/* Port Control Register (8 bit) */ +#define B53_PORT_CTRL(i) (0x00 + (i)) +#define PORT_CTRL_RX_DISABLE BIT(0) +#define PORT_CTRL_TX_DISABLE BIT(1) +#define PORT_CTRL_RX_BCST_EN BIT(2) /* Broadcast RX (P8 only) */ +#define PORT_CTRL_RX_MCST_EN BIT(3) /* Multicast RX (P8 only) */ +#define PORT_CTRL_RX_UCST_EN BIT(4) /* Unicast RX (P8 only) */ +#define PORT_CTRL_STP_STATE_S 5 +#define PORT_CTRL_STP_STATE_MASK (0x7 << PORT_CTRL_STP_STATE_S) + +/* SMP Control Register (8 bit) */ +#define B53_SMP_CTRL 0x0a + +/* Switch Mode Control Register (8 bit) */ +#define B53_SWITCH_MODE 0x0b +#define SM_SW_FWD_MODE BIT(0) /* 1 = Managed Mode */ +#define SM_SW_FWD_EN BIT(1) /* Forwarding Enable */ + +/* IMP Port state override register (8 bit) */ +#define B53_PORT_OVERRIDE_CTRL 0x0e +#define PORT_OVERRIDE_LINK BIT(0) +#define PORT_OVERRIDE_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */ +#define PORT_OVERRIDE_SPEED_S 2 +#define PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S) +#define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S) +#define PORT_OVERRIDE_SPEED_1000M (2 << PORT_OVERRIDE_SPEED_S) +#define PORT_OVERRIDE_RV_MII_25 BIT(4) /* BCM5325 only */ +#define PORT_OVERRIDE_RX_FLOW BIT(4) +#define PORT_OVERRIDE_TX_FLOW BIT(5) +#define PORT_OVERRIDE_SPEED_2000M BIT(6) /* BCM5301X only, requires setting 1000M */ +#define PORT_OVERRIDE_EN BIT(7) /* Use the register contents */ + +/* Power-down mode control */ +#define B53_PD_MODE_CTRL_25 0x0f + +/* IP Multicast control (8 bit) */ +#define B53_IP_MULTICAST_CTRL 0x21 +#define B53_IPMC_FWD_EN BIT(1) +#define B53_UC_FWD_EN BIT(6) +#define B53_MC_FWD_EN BIT(7) + +/* (16 bit) */ +#define B53_UC_FLOOD_MASK 0x32 +#define B53_MC_FLOOD_MASK 0x34 +#define B53_IPMC_FLOOD_MASK 0x36 + +/* + * Override Ports 0-7 State on devices with xMII interfaces (8 bit) + * + * For port 8 still use B53_PORT_OVERRIDE_CTRL + * Please note that not all ports are available on every hardware, e.g. BCM5301X + * don't include overriding port 6, BCM63xx also have some limitations. + */ +#define B53_GMII_PORT_OVERRIDE_CTRL(i) (0x58 + (i)) +#define GMII_PO_LINK BIT(0) +#define GMII_PO_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */ +#define GMII_PO_SPEED_S 2 +#define GMII_PO_SPEED_10M (0 << GMII_PO_SPEED_S) +#define GMII_PO_SPEED_100M (1 << GMII_PO_SPEED_S) +#define GMII_PO_SPEED_1000M (2 << GMII_PO_SPEED_S) +#define GMII_PO_RX_FLOW BIT(4) +#define GMII_PO_TX_FLOW BIT(5) +#define GMII_PO_EN BIT(6) /* Use the register contents */ +#define GMII_PO_SPEED_2000M BIT(7) /* BCM5301X only, requires setting 1000M */ + +#define B53_RGMII_CTRL_IMP 0x60 +#define RGMII_CTRL_ENABLE_GMII BIT(7) +#define RGMII_CTRL_TIMING_SEL BIT(2) +#define RGMII_CTRL_DLL_RXC BIT(1) +#define RGMII_CTRL_DLL_TXC BIT(0) + +#define B53_RGMII_CTRL_P(i) (B53_RGMII_CTRL_IMP + (i)) + +/* Software reset register (8 bit) */ +#define B53_SOFTRESET 0x79 +#define SW_RST BIT(7) +#define EN_SW_RST BIT(4) + +/* Fast Aging Control register (8 bit) */ +#define B53_FAST_AGE_CTRL 0x88 +#define FAST_AGE_STATIC BIT(0) +#define FAST_AGE_DYNAMIC BIT(1) +#define FAST_AGE_PORT BIT(2) +#define FAST_AGE_VLAN BIT(3) +#define FAST_AGE_STP BIT(4) +#define FAST_AGE_MC BIT(5) +#define FAST_AGE_DONE BIT(7) + +/************************************************************************* + * Status Page registers + *************************************************************************/ + +/* Link Status Summary Register (16bit) */ +#define B53_LINK_STAT 0x00 + +/* Link Status Change Register (16 bit) */ +#define B53_LINK_STAT_CHANGE 0x02 + +/* Port Speed Summary Register (16 bit for FE, 32 bit for GE) */ +#define B53_SPEED_STAT 0x04 +#define SPEED_PORT_FE(reg, port) (((reg) >> (port)) & 1) +#define SPEED_PORT_GE(reg, port) (((reg) >> 2 * (port)) & 3) +#define SPEED_STAT_10M 0 +#define SPEED_STAT_100M 1 +#define SPEED_STAT_1000M 2 + +/* Duplex Status Summary (16 bit) */ +#define B53_DUPLEX_STAT_FE 0x06 +#define B53_DUPLEX_STAT_GE 0x08 +#define B53_DUPLEX_STAT_63XX 0x0c + +/* Revision ID register for BCM5325 */ +#define B53_REV_ID_25 0x50 + +/* Strap Value (48 bit) */ +#define B53_STRAP_VALUE 0x70 +#define SV_GMII_CTRL_115 BIT(27) + +/************************************************************************* + * Management Mode Page Registers + *************************************************************************/ + +/* Global Management Config Register (8 bit) */ +#define B53_GLOBAL_CONFIG 0x00 +#define GC_RESET_MIB 0x01 +#define GC_RX_BPDU_EN 0x02 +#define GC_MIB_AC_HDR_EN 0x10 +#define GC_MIB_AC_EN 0x20 +#define GC_FRM_MGMT_PORT_M 0xC0 +#define GC_FRM_MGMT_PORT_04 0x00 +#define GC_FRM_MGMT_PORT_MII 0x80 + +/* Broadcom Header control register (8 bit) */ +#define B53_BRCM_HDR 0x03 +#define BRCM_HDR_P8_EN BIT(0) /* Enable tagging on port 8 */ +#define BRCM_HDR_P5_EN BIT(1) /* Enable tagging on port 5 */ + +/* Device ID register (8 or 32 bit) */ +#define B53_DEVICE_ID 0x30 + +/* Revision ID register (8 bit) */ +#define B53_REV_ID 0x40 + +/************************************************************************* + * ARL Access Page Registers + *************************************************************************/ + +/* VLAN Table Access Register (8 bit) */ +#define B53_VT_ACCESS 0x80 +#define B53_VT_ACCESS_9798 0x60 /* for BCM5397/BCM5398 */ +#define B53_VT_ACCESS_63XX 0x60 /* for BCM6328/62/68 */ +#define VTA_CMD_WRITE 0 +#define VTA_CMD_READ 1 +#define VTA_CMD_CLEAR 2 +#define VTA_START_CMD BIT(7) + +/* VLAN Table Index Register (16 bit) */ +#define B53_VT_INDEX 0x81 +#define B53_VT_INDEX_9798 0x61 +#define B53_VT_INDEX_63XX 0x62 + +/* VLAN Table Entry Register (32 bit) */ +#define B53_VT_ENTRY 0x83 +#define B53_VT_ENTRY_9798 0x63 +#define B53_VT_ENTRY_63XX 0x64 +#define VTE_MEMBERS 0x1ff +#define VTE_UNTAG_S 9 +#define VTE_UNTAG (0x1ff << 9) + +/************************************************************************* + * Port VLAN Registers + *************************************************************************/ + +/* Port VLAN mask (16 bit) IMP port is always 8, also on 5325 & co */ +#define B53_PVLAN_PORT_MASK(i) ((i) * 2) + +/************************************************************************* + * 802.1Q Page Registers + *************************************************************************/ + +/* Global QoS Control (8 bit) */ +#define B53_QOS_GLOBAL_CTL 0x00 + +/* Enable 802.1Q for individual Ports (16 bit) */ +#define B53_802_1P_EN 0x04 + +/************************************************************************* + * VLAN Page Registers + *************************************************************************/ + +/* VLAN Control 0 (8 bit) */ +#define B53_VLAN_CTRL0 0x00 +#define VC0_8021PF_CTRL_MASK 0x3 +#define VC0_8021PF_CTRL_NONE 0x0 +#define VC0_8021PF_CTRL_CHANGE_PRI 0x1 +#define VC0_8021PF_CTRL_CHANGE_VID 0x2 +#define VC0_8021PF_CTRL_CHANGE_BOTH 0x3 +#define VC0_8021QF_CTRL_MASK 0xc +#define VC0_8021QF_CTRL_CHANGE_PRI 0x1 +#define VC0_8021QF_CTRL_CHANGE_VID 0x2 +#define VC0_8021QF_CTRL_CHANGE_BOTH 0x3 +#define VC0_RESERVED_1 BIT(1) +#define VC0_DROP_VID_MISS BIT(4) +#define VC0_VID_HASH_VID BIT(5) +#define VC0_VID_CHK_EN BIT(6) /* Use VID,DA or VID,SA */ +#define VC0_VLAN_EN BIT(7) /* 802.1Q VLAN Enabled */ + +/* VLAN Control 1 (8 bit) */ +#define B53_VLAN_CTRL1 0x01 +#define VC1_RX_MCST_TAG_EN BIT(1) +#define VC1_RX_MCST_FWD_EN BIT(2) +#define VC1_RX_MCST_UNTAG_EN BIT(3) + +/* VLAN Control 2 (8 bit) */ +#define B53_VLAN_CTRL2 0x02 + +/* VLAN Control 3 (8 bit when BCM5325, 16 bit else) */ +#define B53_VLAN_CTRL3 0x03 +#define B53_VLAN_CTRL3_63XX 0x04 +#define VC3_MAXSIZE_1532 BIT(6) /* 5325 only */ +#define VC3_HIGH_8BIT_EN BIT(7) /* 5325 only */ + +/* VLAN Control 4 (8 bit) */ +#define B53_VLAN_CTRL4 0x05 +#define B53_VLAN_CTRL4_25 0x04 +#define B53_VLAN_CTRL4_63XX 0x06 +#define VC4_ING_VID_CHECK_S 6 +#define VC4_ING_VID_CHECK_MASK (0x3 << VC4_ING_VID_CHECK_S) +#define VC4_ING_VID_VIO_FWD 0 /* forward, but do not learn */ +#define VC4_ING_VID_VIO_DROP 1 /* drop VID violations */ +#define VC4_NO_ING_VID_CHK 2 /* do not check */ +#define VC4_ING_VID_VIO_TO_IMP 3 /* redirect to MII port */ + +/* VLAN Control 5 (8 bit) */ +#define B53_VLAN_CTRL5 0x06 +#define B53_VLAN_CTRL5_25 0x05 +#define B53_VLAN_CTRL5_63XX 0x07 +#define VC5_VID_FFF_EN BIT(2) +#define VC5_DROP_VTABLE_MISS BIT(3) + +/* VLAN Control 6 (8 bit) */ +#define B53_VLAN_CTRL6 0x07 +#define B53_VLAN_CTRL6_63XX 0x08 + +/* VLAN Table Access Register (16 bit) */ +#define B53_VLAN_TABLE_ACCESS_25 0x06 /* BCM5325E/5350 */ +#define B53_VLAN_TABLE_ACCESS_65 0x08 /* BCM5365 */ +#define VTA_VID_LOW_MASK_25 0xf +#define VTA_VID_LOW_MASK_65 0xff +#define VTA_VID_HIGH_S_25 4 +#define VTA_VID_HIGH_S_65 8 +#define VTA_VID_HIGH_MASK_25 (0xff << VTA_VID_HIGH_S_25E) +#define VTA_VID_HIGH_MASK_65 (0xf << VTA_VID_HIGH_S_65) +#define VTA_RW_STATE BIT(12) +#define VTA_RW_STATE_RD 0 +#define VTA_RW_STATE_WR BIT(12) +#define VTA_RW_OP_EN BIT(13) + +/* VLAN Read/Write Registers for (16/32 bit) */ +#define B53_VLAN_WRITE_25 0x08 +#define B53_VLAN_WRITE_65 0x0a +#define B53_VLAN_READ 0x0c +#define VA_MEMBER_MASK 0x3f +#define VA_UNTAG_S_25 6 +#define VA_UNTAG_MASK_25 0x3f +#define VA_UNTAG_S_65 7 +#define VA_UNTAG_MASK_65 0x1f +#define VA_VID_HIGH_S 12 +#define VA_VID_HIGH_MASK (0xffff << VA_VID_HIGH_S) +#define VA_VALID_25 BIT(20) +#define VA_VALID_25_R4 BIT(24) +#define VA_VALID_65 BIT(14) + +/* VLAN Port Default Tag (16 bit) */ +#define B53_VLAN_PORT_DEF_TAG(i) (0x10 + 2 * (i)) + +/************************************************************************* + * Jumbo Frame Page Registers + *************************************************************************/ + +/* Jumbo Enable Port Mask (bit i == port i enabled) (32 bit) */ +#define B53_JUMBO_PORT_MASK 0x01 +#define B53_JUMBO_PORT_MASK_63XX 0x04 +#define JPM_10_100_JUMBO_EN BIT(24) /* GigE always enabled */ + +/* Good Frame Max Size without 802.1Q TAG (16 bit) */ +#define B53_JUMBO_MAX_SIZE 0x05 +#define B53_JUMBO_MAX_SIZE_63XX 0x08 +#define JMS_MIN_SIZE 1518 +#define JMS_MAX_SIZE 9724 + +/************************************************************************* + * CFP Configuration Page Registers + *************************************************************************/ + +/* CFP Control Register with ports map (8 bit) */ +#define B53_CFP_CTRL 0x00 + +#endif /* !__B53_REGS_H */ diff --git a/drivers/net/dsa/b53/b53_spi.c b/drivers/net/dsa/b53/b53_spi.c new file mode 100644 index 0000000..2bda0b5 --- /dev/null +++ b/drivers/net/dsa/b53/b53_spi.c @@ -0,0 +1,331 @@ +/* + * B53 register access through SPI + * + * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <asm/unaligned.h> + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/platform_data/b53.h> + +#include "b53_priv.h" + +#define B53_SPI_DATA 0xf0 + +#define B53_SPI_STATUS 0xfe +#define B53_SPI_CMD_SPIF BIT(7) +#define B53_SPI_CMD_RACK BIT(5) + +#define B53_SPI_CMD_READ 0x00 +#define B53_SPI_CMD_WRITE 0x01 +#define B53_SPI_CMD_NORMAL 0x60 +#define B53_SPI_CMD_FAST 0x10 + +#define B53_SPI_PAGE_SELECT 0xff + +static inline int b53_spi_read_reg(struct spi_device *spi, u8 reg, u8 *val, + unsigned int len) +{ + u8 txbuf[2]; + + txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_READ; + txbuf[1] = reg; + + return spi_write_then_read(spi, txbuf, 2, val, len); +} + +static inline int b53_spi_clear_status(struct spi_device *spi) +{ + unsigned int i; + u8 rxbuf; + int ret; + + for (i = 0; i < 10; i++) { + ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1); + if (ret) + return ret; + + if (!(rxbuf & B53_SPI_CMD_SPIF)) + break; + + mdelay(1); + } + + if (i == 10) + return -EIO; + + return 0; +} + +static inline int b53_spi_set_page(struct spi_device *spi, u8 page) +{ + u8 txbuf[3]; + + txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE; + txbuf[1] = B53_SPI_PAGE_SELECT; + txbuf[2] = page; + + return spi_write(spi, txbuf, sizeof(txbuf)); +} + +static inline int b53_prepare_reg_access(struct spi_device *spi, u8 page) +{ + int ret = b53_spi_clear_status(spi); + + if (ret) + return ret; + + return b53_spi_set_page(spi, page); +} + +static int b53_spi_prepare_reg_read(struct spi_device *spi, u8 reg) +{ + u8 rxbuf; + int retry_count; + int ret; + + ret = b53_spi_read_reg(spi, reg, &rxbuf, 1); + if (ret) + return ret; + + for (retry_count = 0; retry_count < 10; retry_count++) { + ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1); + if (ret) + return ret; + + if (rxbuf & B53_SPI_CMD_RACK) + break; + + mdelay(1); + } + + if (retry_count == 10) + return -EIO; + + return 0; +} + +static int b53_spi_read(struct b53_device *dev, u8 page, u8 reg, u8 *data, + unsigned int len) +{ + struct spi_device *spi = dev->priv; + int ret; + + ret = b53_prepare_reg_access(spi, page); + if (ret) + return ret; + + ret = b53_spi_prepare_reg_read(spi, reg); + if (ret) + return ret; + + return b53_spi_read_reg(spi, B53_SPI_DATA, data, len); +} + +static int b53_spi_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) +{ + return b53_spi_read(dev, page, reg, val, 1); +} + +static int b53_spi_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) +{ + int ret = b53_spi_read(dev, page, reg, (u8 *)val, 2); + + if (!ret) + *val = le16_to_cpu(*val); + + return ret; +} + +static int b53_spi_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val) +{ + int ret = b53_spi_read(dev, page, reg, (u8 *)val, 4); + + if (!ret) + *val = le32_to_cpu(*val); + + return ret; +} + +static int b53_spi_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + int ret; + + *val = 0; + ret = b53_spi_read(dev, page, reg, (u8 *)val, 6); + if (!ret) + *val = le64_to_cpu(*val); + + return ret; +} + +static int b53_spi_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + int ret = b53_spi_read(dev, page, reg, (u8 *)val, 8); + + if (!ret) + *val = le64_to_cpu(*val); + + return ret; +} + +static int b53_spi_write8(struct b53_device *dev, u8 page, u8 reg, u8 value) +{ + struct spi_device *spi = dev->priv; + int ret; + u8 txbuf[3]; + + ret = b53_prepare_reg_access(spi, page); + if (ret) + return ret; + + txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE; + txbuf[1] = reg; + txbuf[2] = value; + + return spi_write(spi, txbuf, sizeof(txbuf)); +} + +static int b53_spi_write16(struct b53_device *dev, u8 page, u8 reg, u16 value) +{ + struct spi_device *spi = dev->priv; + int ret; + u8 txbuf[4]; + + ret = b53_prepare_reg_access(spi, page); + if (ret) + return ret; + + txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE; + txbuf[1] = reg; + put_unaligned_le16(value, &txbuf[2]); + + return spi_write(spi, txbuf, sizeof(txbuf)); +} + +static int b53_spi_write32(struct b53_device *dev, u8 page, u8 reg, u32 value) +{ + struct spi_device *spi = dev->priv; + int ret; + u8 txbuf[6]; + + ret = b53_prepare_reg_access(spi, page); + if (ret) + return ret; + + txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE; + txbuf[1] = reg; + put_unaligned_le32(value, &txbuf[2]); + + return spi_write(spi, txbuf, sizeof(txbuf)); +} + +static int b53_spi_write48(struct b53_device *dev, u8 page, u8 reg, u64 value) +{ + struct spi_device *spi = dev->priv; + int ret; + u8 txbuf[10]; + + ret = b53_prepare_reg_access(spi, page); + if (ret) + return ret; + + txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE; + txbuf[1] = reg; + put_unaligned_le64(value, &txbuf[2]); + + return spi_write(spi, txbuf, sizeof(txbuf) - 2); +} + +static int b53_spi_write64(struct b53_device *dev, u8 page, u8 reg, u64 value) +{ + struct spi_device *spi = dev->priv; + int ret; + u8 txbuf[10]; + + ret = b53_prepare_reg_access(spi, page); + if (ret) + return ret; + + txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE; + txbuf[1] = reg; + put_unaligned_le64(value, &txbuf[2]); + + return spi_write(spi, txbuf, sizeof(txbuf)); +} + +static struct b53_io_ops b53_spi_ops = { + .read8 = b53_spi_read8, + .read16 = b53_spi_read16, + .read32 = b53_spi_read32, + .read48 = b53_spi_read48, + .read64 = b53_spi_read64, + .write8 = b53_spi_write8, + .write16 = b53_spi_write16, + .write32 = b53_spi_write32, + .write48 = b53_spi_write48, + .write64 = b53_spi_write64, +}; + +static int b53_spi_probe(struct spi_device *spi) +{ + struct b53_device *dev; + int ret; + + dev = b53_switch_alloc(&spi->dev, &b53_spi_ops, spi); + if (!dev) + return -ENOMEM; + + if (spi->dev.platform_data) + dev->pdata = spi->dev.platform_data; + + ret = b53_switch_register(dev); + if (ret) + return ret; + + spi_set_drvdata(spi, dev); + + return 0; +} + +static int b53_spi_remove(struct spi_device *spi) +{ + struct b53_device *dev = spi_get_drvdata(spi); + + if (dev) + b53_switch_remove(dev); + + return 0; +} + +static struct spi_driver b53_spi_driver = { + .driver = { + .name = "b53-switch", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = b53_spi_probe, + .remove = b53_spi_remove, +}; + +module_spi_driver(b53_spi_driver); + +MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>"); +MODULE_DESCRIPTION("B53 SPI access driver"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c new file mode 100644 index 0000000..70fd472 --- /dev/null +++ b/drivers/net/dsa/b53/b53_srab.c @@ -0,0 +1,415 @@ +/* + * B53 register access through Switch Register Access Bridge Registers + * + * Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/platform_data/b53.h> + +#include "b53_priv.h" + +/* command and status register of the SRAB */ +#define B53_SRAB_CMDSTAT 0x2c +#define B53_SRAB_CMDSTAT_RST BIT(2) +#define B53_SRAB_CMDSTAT_WRITE BIT(1) +#define B53_SRAB_CMDSTAT_GORDYN BIT(0) +#define B53_SRAB_CMDSTAT_PAGE 24 +#define B53_SRAB_CMDSTAT_REG 16 + +/* high order word of write data to switch registe */ +#define B53_SRAB_WD_H 0x30 + +/* low order word of write data to switch registe */ +#define B53_SRAB_WD_L 0x34 + +/* high order word of read data from switch register */ +#define B53_SRAB_RD_H 0x38 + +/* low order word of read data from switch register */ +#define B53_SRAB_RD_L 0x3c + +/* command and status register of the SRAB */ +#define B53_SRAB_CTRLS 0x40 +#define B53_SRAB_CTRLS_RCAREQ BIT(3) +#define B53_SRAB_CTRLS_RCAGNT BIT(4) +#define B53_SRAB_CTRLS_SW_INIT_DONE BIT(6) + +/* the register captures interrupt pulses from the switch */ +#define B53_SRAB_INTR 0x44 +#define B53_SRAB_INTR_P(x) BIT(x) +#define B53_SRAB_SWITCH_PHY BIT(8) +#define B53_SRAB_1588_SYNC BIT(9) +#define B53_SRAB_IMP1_SLEEP_TIMER BIT(10) +#define B53_SRAB_P7_SLEEP_TIMER BIT(11) +#define B53_SRAB_IMP0_SLEEP_TIMER BIT(12) + +struct b53_srab_priv { + void __iomem *regs; +}; + +static int b53_srab_request_grant(struct b53_device *dev) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + u32 ctrls; + int i; + + ctrls = readl(regs + B53_SRAB_CTRLS); + ctrls |= B53_SRAB_CTRLS_RCAREQ; + writel(ctrls, regs + B53_SRAB_CTRLS); + + for (i = 0; i < 20; i++) { + ctrls = readl(regs + B53_SRAB_CTRLS); + if (ctrls & B53_SRAB_CTRLS_RCAGNT) + break; + usleep_range(10, 100); + } + if (WARN_ON(i == 5)) + return -EIO; + + return 0; +} + +static void b53_srab_release_grant(struct b53_device *dev) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + u32 ctrls; + + ctrls = readl(regs + B53_SRAB_CTRLS); + ctrls &= ~B53_SRAB_CTRLS_RCAREQ; + writel(ctrls, regs + B53_SRAB_CTRLS); +} + +static int b53_srab_op(struct b53_device *dev, u8 page, u8 reg, u32 op) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int i; + u32 cmdstat; + + /* set register address */ + cmdstat = (page << B53_SRAB_CMDSTAT_PAGE) | + (reg << B53_SRAB_CMDSTAT_REG) | + B53_SRAB_CMDSTAT_GORDYN | + op; + writel(cmdstat, regs + B53_SRAB_CMDSTAT); + + /* check if operation completed */ + for (i = 0; i < 5; ++i) { + cmdstat = readl(regs + B53_SRAB_CMDSTAT); + if (!(cmdstat & B53_SRAB_CMDSTAT_GORDYN)) + break; + usleep_range(10, 100); + } + + if (WARN_ON(i == 5)) + return -EIO; + + return 0; +} + +static int b53_srab_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + ret = b53_srab_op(dev, page, reg, 0); + if (ret) + goto err; + + *val = readl(regs + B53_SRAB_RD_L) & 0xff; + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + ret = b53_srab_op(dev, page, reg, 0); + if (ret) + goto err; + + *val = readl(regs + B53_SRAB_RD_L) & 0xffff; + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + ret = b53_srab_op(dev, page, reg, 0); + if (ret) + goto err; + + *val = readl(regs + B53_SRAB_RD_L); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + ret = b53_srab_op(dev, page, reg, 0); + if (ret) + goto err; + + *val = readl(regs + B53_SRAB_RD_L); + *val += ((u64)readl(regs + B53_SRAB_RD_H) & 0xffff) << 32; + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + ret = b53_srab_op(dev, page, reg, 0); + if (ret) + goto err; + + *val = readl(regs + B53_SRAB_RD_L); + *val += (u64)readl(regs + B53_SRAB_RD_H) << 32; + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_write8(struct b53_device *dev, u8 page, u8 reg, u8 value) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + writel(value, regs + B53_SRAB_WD_L); + + ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_write16(struct b53_device *dev, u8 page, u8 reg, + u16 value) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + writel(value, regs + B53_SRAB_WD_L); + + ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_write32(struct b53_device *dev, u8 page, u8 reg, + u32 value) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + writel(value, regs + B53_SRAB_WD_L); + + ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_write48(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + writel((u32)value, regs + B53_SRAB_WD_L); + writel((u16)(value >> 32), regs + B53_SRAB_WD_H); + + ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg, + u64 value) +{ + struct b53_srab_priv *priv = dev->priv; + u8 __iomem *regs = priv->regs; + int ret = 0; + + ret = b53_srab_request_grant(dev); + if (ret) + goto err; + + writel((u32)value, regs + B53_SRAB_WD_L); + writel((u32)(value >> 32), regs + B53_SRAB_WD_H); + + ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE); + +err: + b53_srab_release_grant(dev); + + return ret; +} + +static struct b53_io_ops b53_srab_ops = { + .read8 = b53_srab_read8, + .read16 = b53_srab_read16, + .read32 = b53_srab_read32, + .read48 = b53_srab_read48, + .read64 = b53_srab_read64, + .write8 = b53_srab_write8, + .write16 = b53_srab_write16, + .write32 = b53_srab_write32, + .write48 = b53_srab_write48, + .write64 = b53_srab_write64, +}; + +static int b53_srab_probe(struct platform_device *pdev) +{ + struct b53_srab_priv *priv; + struct b53_device *dev; + struct resource *r; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->regs = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(priv->regs)) + return -ENOMEM; + + dev = b53_switch_alloc(&pdev->dev, &b53_srab_ops, priv); + if (!dev) + return -ENOMEM; + + platform_set_drvdata(pdev, dev); + + return b53_switch_register(dev); +} + +static int b53_srab_remove(struct platform_device *pdev) +{ + struct b53_device *dev = platform_get_drvdata(pdev); + + if (dev) + b53_switch_remove(dev); + + return 0; +} + +static const struct of_device_id b53_srab_of_match[] = { + { .compatible = "brcm,bcm53010-srab" }, + { .compatible = "brcm,bcm53011-srab" }, + { .compatible = "brcm,bcm53012-srab" }, + { .compatible = "brcm,bcm53018-srab" }, + { .compatible = "brcm,bcm53019-srab" }, + { .compatible = "brcm,bcm5301x-srab" }, + { /* sentinel */ }, +}; + +static struct platform_driver b53_srab_driver = { + .probe = b53_srab_probe, + .remove = b53_srab_remove, + .driver = { + .name = "b53-srab-switch", + .of_match_table = b53_srab_of_match, + }, +}; + +module_platform_driver(b53_srab_driver); +MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>"); +MODULE_DESCRIPTION("B53 Switch Register Access Bridge Registers (SRAB) access driver"); +MODULE_LICENSE("Dual BSD/GPL"); |