usb: amd5536udc: fixed shared interrupt bug and warning oops

- fixed shared interrupt bug reported by Vadim Lobanov
 - fixed possible warning oops on driver unload when connected
 - prevent interrupt flood in PIO mode ("modprobe amd5536udc use_dma=0")
   when using gadget ether

Signed-off-by: Thomas Dahlmann <dahlmann.thomas@arcor.de>
Cc: Robert Richter <robert.richter@amd.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 30 insertions, 19 deletions

diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index d5b6596..731150d4 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1213,7 +1213,12 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp)
 				tmp &= AMD_UNMASK_BIT(ep->num);
 				writel(tmp, &dev->regs->ep_irqmsk);
 			}
-		}
+		} else if (ep->in) {
+				/* enable ep irq */
+				tmp = readl(&dev->regs->ep_irqmsk);
+				tmp &= AMD_UNMASK_BIT(ep->num);
+				writel(tmp, &dev->regs->ep_irqmsk);
+			}
 
 	} else if (ep->dma) {
 
@@ -2005,18 +2010,17 @@ __acquires(dev->lock)
 {
 	int tmp;
 
-	/* empty queues and init hardware */
-	udc_basic_init(dev);
-	for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
-		empty_req_queue(&dev->ep[tmp]);
-	}
-
 	if (dev->gadget.speed != USB_SPEED_UNKNOWN) {
 		spin_unlock(&dev->lock);
 		driver->disconnect(&dev->gadget);
 		spin_lock(&dev->lock);
 	}
-	/* init */
+
+	/* empty queues and init hardware */
+	udc_basic_init(dev);
+	for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
+		empty_req_queue(&dev->ep[tmp]);
+
 	udc_setup_endpoints(dev);
 }
 
@@ -2472,6 +2476,13 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 				}
 			}
 
+		} else if (!use_dma && ep->in) {
+			/* disable interrupt */
+			tmp = readl(
+				&dev->regs->ep_irqmsk);
+			tmp |= AMD_BIT(ep->num);
+			writel(tmp,
+				&dev->regs->ep_irqmsk);
 		}
 	}
 	/* clear status bits */
@@ -3279,6 +3290,17 @@ static int udc_pci_probe(
 		goto finished;
 	}
 
+	spin_lock_init(&dev->lock);
+	/* udc csr registers base */
+	dev->csr = dev->virt_addr + UDC_CSR_ADDR;
+	/* dev registers base */
+	dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
+	/* ep registers base */
+	dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
+	/* fifo's base */
+	dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
+	dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
+
 	if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
 		dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
 		kfree(dev);
@@ -3331,7 +3353,6 @@ static int udc_probe(struct udc *dev)
 	udc_pollstall_timer.data = 0;
 
 	/* device struct setup */
-	spin_lock_init(&dev->lock);
 	dev->gadget.ops = &udc_ops;
 
 	dev_set_name(&dev->gadget.dev, "gadget");
@@ -3340,16 +3361,6 @@ static int udc_probe(struct udc *dev)
 	dev->gadget.name = name;
 	dev->gadget.is_dualspeed = 1;
 
-	/* udc csr registers base */
-	dev->csr = dev->virt_addr + UDC_CSR_ADDR;
-	/* dev registers base */
-	dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
-	/* ep registers base */
-	dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
-	/* fifo's base */
-	dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
-	dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
-
 	/* init registers, interrupts, ... */
 	startup_registers(dev);