Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)
  MIPS: O32: Provide definition of registers ta0 .. ta3.
  MIPS: perf: Add Octeon support for hardware perf.
  MIPS: perf: Add support for 64-bit perf counters.
  MIPS: perf: Reorganize contents of perf support files.
  MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
  MIPS: Add accessor macros for 64-bit performance counter registers.
  MIPS: Add probes for more Octeon II CPUs.
  MIPS: Add more CPU identifiers for Octeon II CPUs.
  MIPS: XLR, XLS: Add comment for smp setup
  MIPS: JZ4740: GPIO: Check correct IRQ in demux handler
  MIPS: JZ4740: GPIO: Simplify IRQ demuxer
  MIPS: JZ4740: Use generic irq chip
  MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
  MIPS: Alchemy: kill au1xxx.h header
  MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
  MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
  MIPS: Alchemy: Redo PCI as platform driver
  MIPS: Alchemy: more base address cleanup
  MIPS: Alchemy: rewrite USB platform setup.
  MIPS: Alchemy: abstract USB block control register access
  ...

Fix up trivial conflicts in:
	arch/mips/alchemy/devboards/db1x00/platform.c
	drivers/ide/Kconfig
	drivers/mmc/host/au1xmmc.c
	drivers/video/Kconfig
	sound/mips/Kconfig

20 files changed, 491 insertions, 257 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 76f6531..a3afac4 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -300,7 +300,7 @@ config I2C_AT91
 
 config I2C_AU1550
 	tristate "Au1550/Au1200 SMBus interface"
-	depends on SOC_AU1550 || SOC_AU1200
+	depends on MIPS_ALCHEMY
 	help
 	  If you say yes to this option, support will be included for the
 	  Au1550 and Au1200 SMBus interface.
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 4f757a2..f314d7f 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -36,7 +36,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
 #define PSC_SEL		0x00
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 76b6d98..5a26584 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -677,19 +677,19 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
 
 config BLK_DEV_IDE_AU1XXX
        bool "IDE for AMD Alchemy Au1200"
-       depends on SOC_AU1200
+       depends on MIPS_ALCHEMY
        select IDE_XFER_MODE
 choice
        prompt "IDE Mode for AMD Alchemy Au1200"
        default BLK_DEV_IDE_AU1XXX_PIO_DBDMA
-       depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+       depends on BLK_DEV_IDE_AU1XXX
 
 config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
        bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
 
 config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
        bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
-       depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+       depends on BLK_DEV_IDE_AU1XXX
 endchoice
 
 config BLK_DEV_IDE_TX4938
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index b26c234..259786c 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -36,13 +36,17 @@
 #include <linux/ide.h>
 #include <linux/scatterlist.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1xxx_ide.h>
 
 #define DRV_NAME	"au1200-ide"
 #define DRV_AUTHOR	"Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
 
+#ifndef IDE_REG_SHIFT
+#define IDE_REG_SHIFT 5
+#endif
+
 /* enable the burstmode in the dbdma */
 #define IDE_AU1XXX_BURSTMODE	1
 
@@ -317,10 +321,11 @@ static void auide_ddma_rx_callback(int irq, void *param)
 }
 #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
 
-static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
+static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize,
+				 u32 devwidth, u32 flags, u32 regbase)
 {
 	dev->dev_id          = dev_id;
-	dev->dev_physaddr    = (u32)IDE_PHYS_ADDR;
+	dev->dev_physaddr    = CPHYSADDR(regbase);
 	dev->dev_intlevel    = 0;
 	dev->dev_intpolarity = 0;
 	dev->dev_tsize       = tsize;
@@ -344,7 +349,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 	dbdev_tab_t source_dev_tab, target_dev_tab;
 	u32 dev_id, tsize, devwidth, flags;
 
-	dev_id	 = IDE_DDMA_REQ;
+	dev_id	 = hwif->ddma_id;
 
 	tsize    =  8; /*  1 */
 	devwidth = 32; /* 16 */
@@ -356,20 +361,17 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 #endif
 
 	/* setup dev_tab for tx channel */
-	auide_init_dbdma_dev( &source_dev_tab,
-			      dev_id,
-			      tsize, devwidth, DEV_FLAGS_OUT | flags);
+	auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
+			     DEV_FLAGS_OUT | flags, auide->regbase);
  	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 
-	auide_init_dbdma_dev( &source_dev_tab,
-			      dev_id,
-			      tsize, devwidth, DEV_FLAGS_IN | flags);
+	auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
+			     DEV_FLAGS_IN | flags, auide->regbase);
  	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 	
 	/* We also need to add a target device for the DMA */
-	auide_init_dbdma_dev( &target_dev_tab,
-			      (u32)DSCR_CMD0_ALWAYS,
-			      tsize, devwidth, DEV_FLAGS_ANYUSE);
+	auide_init_dbdma_dev(&target_dev_tab, (u32)DSCR_CMD0_ALWAYS, tsize,
+			     devwidth, DEV_FLAGS_ANYUSE, auide->regbase);
 	auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);	
  
 	/* Get a channel for TX */
@@ -411,14 +413,12 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
 #endif
 
 	/* setup dev_tab for tx channel */
-	auide_init_dbdma_dev( &source_dev_tab,
-			      (u32)DSCR_CMD0_ALWAYS,
-			      8, 32, DEV_FLAGS_OUT | flags);
+	auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
+			     DEV_FLAGS_OUT | flags, auide->regbase);
  	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 
-	auide_init_dbdma_dev( &source_dev_tab,
-			      (u32)DSCR_CMD0_ALWAYS,
-			      8, 32, DEV_FLAGS_IN | flags);
+	auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
+			     DEV_FLAGS_IN | flags, auide->regbase);
  	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 	
 	/* Get a channel for TX */
@@ -540,6 +540,14 @@ static int au_ide_probe(struct platform_device *dev)
 		goto out;
 	}
 
+	res = platform_get_resource(dev, IORESOURCE_DMA, 0);
+	if (!res) {
+		pr_debug("%s: no DDMA ID resource\n", DRV_NAME);
+		ret = -ENODEV;
+		goto out;
+	}
+	ahwif->ddma_id = res->start;
+
 	memset(&hw, 0, sizeof(hw));
 	auide_setup_ports(&hw, ahwif);
 	hw.irq = ahwif->irq;
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 87d5067..cf444b0 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -263,7 +263,7 @@ config MMC_WBSD
 
 config MMC_AU1X
 	tristate "Alchemy AU1XX0 MMC Card Interface support"
-	depends on SOC_AU1200
+	depends on MIPS_ALCHEMY
 	help
 	  This selects the AMD Alchemy(R) Multimedia card interface.
 	  If you have a Alchemy platform with a MMC slot, say Y or M here.
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 707bc7d..5d3b9ae 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -64,11 +64,8 @@
 #define AU1XMMC_DESCRIPTOR_COUNT 1
 
 /* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */
-#ifdef CONFIG_SOC_AU1100
-#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff
-#else	/* Au1200 */
-#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff
-#endif
+#define AU1100_MMC_DESCRIPTOR_SIZE 0x0000ffff
+#define AU1200_MMC_DESCRIPTOR_SIZE 0x003fffff
 
 #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
 		     MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
@@ -127,6 +124,7 @@ struct au1xmmc_host {
 #define HOST_F_XMIT	0x0001
 #define HOST_F_RECV	0x0002
 #define HOST_F_DMA	0x0010
+#define HOST_F_DBDMA	0x0020
 #define HOST_F_ACTIVE	0x0100
 #define HOST_F_STOP	0x1000
 
@@ -151,6 +149,16 @@ struct au1xmmc_host {
 #define DMA_CHANNEL(h)	\
 	(((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
 
+static inline int has_dbdma(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1200:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
 static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
 {
 	u32 val = au_readl(HOST_CONFIG(host));
@@ -353,14 +361,12 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
 	data->bytes_xfered = 0;
 
 	if (!data->error) {
-		if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200	/* DBDMA */
+		if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
 			u32 chan = DMA_CHANNEL(host);
 
 			chan_tab_t *c = *((chan_tab_t **)chan);
 			au1x_dma_chan_t *cp = c->chan_ptr;
 			data->bytes_xfered = cp->ddma_bytecnt;
-#endif
 		} else
 			data->bytes_xfered =
 				(data->blocks * data->blksz) - host->pio.len;
@@ -570,11 +576,10 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
 
 	host->status = HOST_S_DATA;
 
-	if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200	/* DBDMA */
+	if ((host->flags & (HOST_F_DMA | HOST_F_DBDMA))) {
 		u32 channel = DMA_CHANNEL(host);
 
-		/* Start the DMA as soon as the buffer gets something in it */
+		/* Start the DBDMA as soon as the buffer gets something in it */
 
 		if (host->flags & HOST_F_RECV) {
 			u32 mask = SD_STATUS_DB | SD_STATUS_NE;
@@ -584,7 +589,6 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
 		}
 
 		au1xxx_dbdma_start(channel);
-#endif
 	}
 }
 
@@ -633,8 +637,7 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host,
 
 	au_writel(data->blksz - 1, HOST_BLKSIZE(host));
 
-	if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200	/* DBDMA */
+	if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
 		int i;
 		u32 channel = DMA_CHANNEL(host);
 
@@ -663,7 +666,6 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host,
 
 			datalen -= len;
 		}
-#endif
 	} else {
 		host->pio.index = 0;
 		host->pio.offset = 0;
@@ -838,7 +840,6 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_SOC_AU1200
 /* 8bit memory DMA device */
 static dbdev_tab_t au1xmmc_mem_dbdev = {
 	.dev_id		= DSCR_CMD0_ALWAYS,
@@ -905,7 +906,7 @@ static int au1xmmc_dbdma_init(struct au1xmmc_host *host)
 	au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT);
 
 	/* DBDMA is good to go */
-	host->flags |= HOST_F_DMA;
+	host->flags |= HOST_F_DMA | HOST_F_DBDMA;
 
 	return 0;
 }
@@ -918,7 +919,6 @@ static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host)
 		au1xxx_dbdma_chan_free(host->rx_chan);
 	}
 }
-#endif
 
 static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en)
 {
@@ -997,8 +997,16 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
 	mmc->f_min =   450000;
 	mmc->f_max = 24000000;
 
-	mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
-	mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1100:
+		mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE;
+		mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+		break;
+	case ALCHEMY_CPU_AU1200:
+		mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE;
+		mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+		break;
+	}
 
 	mmc->max_blk_size = 2048;
 	mmc->max_blk_count = 512;
@@ -1028,11 +1036,11 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
 	tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
 			(unsigned long)host);
 
-#ifdef CONFIG_SOC_AU1200
-	ret = au1xmmc_dbdma_init(host);
-	if (ret)
-		pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
-#endif
+	if (has_dbdma()) {
+		ret = au1xmmc_dbdma_init(host);
+		if (ret)
+			pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
+	}
 
 #ifdef CONFIG_LEDS_CLASS
 	if (host->platdata && host->platdata->led) {
@@ -1073,9 +1081,8 @@ out5:
 	au_writel(0, HOST_CONFIG2(host));
 	au_sync();
 
-#ifdef CONFIG_SOC_AU1200
-	au1xmmc_dbdma_shutdown(host);
-#endif
+	if (host->flags & HOST_F_DBDMA)
+		au1xmmc_dbdma_shutdown(host);
 
 	tasklet_kill(&host->data_task);
 	tasklet_kill(&host->finish_task);
@@ -1120,9 +1127,9 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev)
 		tasklet_kill(&host->data_task);
 		tasklet_kill(&host->finish_task);
 
-#ifdef CONFIG_SOC_AU1200
-		au1xmmc_dbdma_shutdown(host);
-#endif
+		if (host->flags & HOST_F_DBDMA)
+			au1xmmc_dbdma_shutdown(host);
+
 		au1xmmc_set_power(host, 0);
 
 		free_irq(host->irq, host);
@@ -1181,24 +1188,23 @@ static struct platform_driver au1xmmc_driver = {
 
 static int __init au1xmmc_init(void)
 {
-#ifdef CONFIG_SOC_AU1200
-	/* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
-	 * of 8 bits.  And since devices are shared, we need to create
-	 * our own to avoid freaking out other devices.
-	 */
-	memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
-	if (!memid)
-		pr_err("au1xmmc: cannot add memory dbdma dev\n");
-#endif
+	if (has_dbdma()) {
+		/* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
+		* of 8 bits.  And since devices are shared, we need to create
+		* our own to avoid freaking out other devices.
+		*/
+		memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+		if (!memid)
+			pr_err("au1xmmc: cannot add memory dbdma\n");
+	}
 	return platform_driver_register(&au1xmmc_driver);
 }
 
 static void __exit au1xmmc_exit(void)
 {
-#ifdef CONFIG_SOC_AU1200
-	if (memid)
+	if (has_dbdma() && memid)
 		au1xxx_ddma_del_device(memid);
-#endif
+
 	platform_driver_unregister(&au1xmmc_driver);
 }
 
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
index a90cabd..7e50896 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -182,7 +182,7 @@ ltq_mtd_probe(struct platform_device *pdev)
 		parts = ltq_mtd_data->parts;
 	}
 
-	err = add_mtd_partitions(ltq_mtd->mtd, parts, nr_parts);
+	err = mtd_device_register(ltq_mtd->mtd, parts, nr_parts);
 	if (err) {
 		dev_err(&pdev->dev, "failed to add partitions\n");
 		goto err_destroy;
@@ -208,7 +208,7 @@ ltq_mtd_remove(struct platform_device *pdev)
 
 	if (ltq_mtd) {
 		if (ltq_mtd->mtd) {
-			del_mtd_partitions(ltq_mtd->mtd);
+			mtd_device_unregister(ltq_mtd->mtd);
 			map_destroy(ltq_mtd->mtd);
 		}
 		if (ltq_mtd->map->virt)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4c34252..dbfa0f7 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -138,7 +138,7 @@ config MTD_NAND_RICOH
 
 config MTD_NAND_AU1550
 	tristate "Au1550/1200 NAND support"
-	depends on SOC_AU1200 || SOC_AU1550
+	depends on MIPS_ALCHEMY
 	help
 	  This enables the driver for the NAND flash controller on the
 	  AMD/Alchemy 1550 SOC.
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index e7767ee..fa5736b 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -19,7 +19,11 @@
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#ifdef CONFIG_MIPS_PB1550
+#include <asm/mach-pb1x00/pb1550.h>
+#elif defined(CONFIG_MIPS_DB1550)
+#include <asm/mach-db1x00/db1x00.h>
+#endif
 #include <asm/mach-db1x00/bcsr.h>
 
 /*
diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c
index 8238667..4865ff1 100644
--- a/drivers/net/ethernet/amd/au1000_eth.c
+++ b/drivers/net/ethernet/amd/au1000_eth.c
@@ -541,19 +541,17 @@ static void au1000_reset_mac(struct net_device *dev)
  * these are not descriptors sitting in memory.
  */
 static void
-au1000_setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base)
+au1000_setup_hw_rings(struct au1000_private *aup, void __iomem *tx_base)
 {
 	int i;
 
 	for (i = 0; i < NUM_RX_DMA; i++) {
-		aup->rx_dma_ring[i] =
-			(struct rx_dma *)
-					(rx_base + sizeof(struct rx_dma)*i);
+		aup->rx_dma_ring[i] = (struct rx_dma *)
+			(tx_base + 0x100 + sizeof(struct rx_dma) * i);
 	}
 	for (i = 0; i < NUM_TX_DMA; i++) {
-		aup->tx_dma_ring[i] =
-			(struct tx_dma *)
-					(tx_base + sizeof(struct tx_dma)*i);
+		aup->tx_dma_ring[i] = (struct tx_dma *)
+			(tx_base + sizeof(struct tx_dma) * i);
 	}
 }
 
@@ -1026,7 +1024,7 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 	struct net_device *dev = NULL;
 	struct db_dest *pDB, *pDBfree;
 	int irq, i, err = 0;
-	struct resource *base, *macen;
+	struct resource *base, *macen, *macdma;
 
 	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!base) {
@@ -1049,6 +1047,13 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 		goto out;
 	}
 
+	macdma = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (!macdma) {
+		dev_err(&pdev->dev, "failed to retrieve MACDMA registers\n");
+		err = -ENODEV;
+		goto out;
+	}
+
 	if (!request_mem_region(base->start, resource_size(base),
 							pdev->name)) {
 		dev_err(&pdev->dev, "failed to request memory region for base registers\n");
@@ -1063,6 +1068,13 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 		goto err_request;
 	}
 
+	if (!request_mem_region(macdma->start, resource_size(macdma),
+							pdev->name)) {
+		dev_err(&pdev->dev, "failed to request MACDMA memory region\n");
+		err = -ENXIO;
+		goto err_macdma;
+	}
+
 	dev = alloc_etherdev(sizeof(struct au1000_private));
 	if (!dev) {
 		dev_err(&pdev->dev, "alloc_etherdev failed\n");
@@ -1109,10 +1121,14 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 	}
 	aup->mac_id = pdev->id;
 
-	if (pdev->id == 0)
-		au1000_setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
-	else if (pdev->id == 1)
-		au1000_setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
+	aup->macdma = ioremap_nocache(macdma->start, resource_size(macdma));
+	if (!aup->macdma) {
+		dev_err(&pdev->dev, "failed to ioremap MACDMA registers\n");
+		err = -ENXIO;
+		goto err_remap3;
+	}
+
+	au1000_setup_hw_rings(aup, aup->macdma);
 
 	/* set a random MAC now in case platform_data doesn't provide one */
 	random_ether_addr(dev->dev_addr);
@@ -1252,6 +1268,8 @@ err_out:
 err_mdiobus_reg:
 	mdiobus_free(aup->mii_bus);
 err_mdiobus_alloc:
+	iounmap(aup->macdma);
+err_remap3:
 	iounmap(aup->enable);
 err_remap2:
 	iounmap(aup->mac);
@@ -1261,6 +1279,8 @@ err_remap1:
 err_vaddr:
 	free_netdev(dev);
 err_alloc:
+	release_mem_region(macdma->start, resource_size(macdma));
+err_macdma:
 	release_mem_region(macen->start, resource_size(macen));
 err_request:
 	release_mem_region(base->start, resource_size(base));
@@ -1293,9 +1313,13 @@ static int __devexit au1000_remove(struct platform_device *pdev)
 			(NUM_TX_BUFFS + NUM_RX_BUFFS),
 			(void *)aup->vaddr, aup->dma_addr);
 
+	iounmap(aup->macdma);
 	iounmap(aup->mac);
 	iounmap(aup->enable);
 
+	base = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	release_mem_region(base->start, resource_size(base));
+
 	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(base->start, resource_size(base));
 
diff --git a/drivers/net/ethernet/amd/au1000_eth.h b/drivers/net/ethernet/amd/au1000_eth.h
index 6229c77..4b7f7ad 100644
--- a/drivers/net/ethernet/amd/au1000_eth.h
+++ b/drivers/net/ethernet/amd/au1000_eth.h
@@ -124,7 +124,7 @@ struct au1000_private {
 	 */
 	struct mac_reg *mac;  /* mac registers                      */
 	u32 *enable;     /* address of MAC Enable Register     */
-
+	void __iomem *macdma;	/* base of MAC DMA port */
 	u32 vaddr;                /* virtual address of rx/tx buffers   */
 	dma_addr_t dma_addr;      /* dma address of rx/tx buffers       */
 
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index a40fab4..d423d18 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -314,7 +314,7 @@ config TOSHIBA_FIR
 
 config AU1000_FIR
 	tristate "Alchemy Au1000 SIR/FIR"
-	depends on SOC_AU1000 && IRDA
+	depends on IRDA && MIPS_ALCHEMY
 
 config SMC_IRCC_FIR
 	tristate "SMSC IrCC (EXPERIMENTAL)"
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 52e2900..a1fd73d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -88,7 +88,7 @@ config SPI_BFIN_SPORT
 
 config SPI_AU1550
 	tristate "Au1550/Au12x0 SPI Controller"
-	depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL
+	depends on MIPS_ALCHEMY && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  If you say yes to this option, support will be included for the
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 4ac2750..791f11b 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -62,7 +62,6 @@ config USB_ARCH_HAS_EHCI
 	boolean
 	default y if FSL_SOC
 	default y if PPC_MPC512x
-	default y if SOC_AU1200
 	default y if ARCH_IXP4XX
 	default y if ARCH_W90X900
 	default y if ARCH_AT91SAM9G45
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index ed48a5d..7ca290f 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -36,3 +36,4 @@ obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
 obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
 obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+obj-$(CONFIG_MIPS_ALCHEMY)	+= alchemy-common.o
diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c
new file mode 100644
index 0000000..b4192c9
--- /dev/null
+++ b/drivers/usb/host/alchemy-common.c
@@ -0,0 +1,337 @@
+/*
+ * USB block power/access management abstraction.
+ *
+ * Au1000+: The OHCI block control register is at the far end of the OHCI memory
+ *	    area. Au1550 has OHCI on different base address. No need to handle
+ *	    UDC here.
+ * Au1200:  one register to control access and clocks to O/EHCI, UDC and OTG
+ *	    as well as the PHY for EHCI and UDC.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* control register offsets */
+#define AU1000_OHCICFG	0x7fffc
+#define AU1550_OHCICFG	0x07ffc
+#define AU1200_USBCFG	0x04
+
+/* Au1000 USB block config bits */
+#define USBHEN_RD	(1 << 4)		/* OHCI reset-done indicator */
+#define USBHEN_CE	(1 << 3)		/* OHCI block clock enable */
+#define USBHEN_E	(1 << 2)		/* OHCI block enable */
+#define USBHEN_C	(1 << 1)		/* OHCI block coherency bit */
+#define USBHEN_BE	(1 << 0)		/* OHCI Big-Endian */
+
+/* Au1200 USB config bits */
+#define USBCFG_PFEN	(1 << 31)		/* prefetch enable (undoc) */
+#define USBCFG_RDCOMB	(1 << 30)		/* read combining (undoc) */
+#define USBCFG_UNKNOWN	(5 << 20)		/* unknown, leave this way */
+#define USBCFG_SSD	(1 << 23)		/* serial short detect en */
+#define USBCFG_PPE	(1 << 19)		/* HS PHY PLL */
+#define USBCFG_UCE	(1 << 18)		/* UDC clock enable */
+#define USBCFG_ECE	(1 << 17)		/* EHCI clock enable */
+#define USBCFG_OCE	(1 << 16)		/* OHCI clock enable */
+#define USBCFG_FLA(x)	(((x) & 0x3f) << 8)
+#define USBCFG_UCAM	(1 << 7)		/* coherent access (undoc) */
+#define USBCFG_GME	(1 << 6)		/* OTG mem access */
+#define USBCFG_DBE	(1 << 5)		/* UDC busmaster enable */
+#define USBCFG_DME	(1 << 4)		/* UDC mem enable */
+#define USBCFG_EBE	(1 << 3)		/* EHCI busmaster enable */
+#define USBCFG_EME	(1 << 2)		/* EHCI mem enable */
+#define USBCFG_OBE	(1 << 1)		/* OHCI busmaster enable */
+#define USBCFG_OME	(1 << 0)		/* OHCI mem enable */
+#define USBCFG_INIT_AU1200	(USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
+				 USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
+				 USBCFG_GME | USBCFG_DBE | USBCFG_DME |	       \
+				 USBCFG_EBE | USBCFG_EME | USBCFG_OBE |	       \
+				 USBCFG_OME)
+
+
+static DEFINE_SPINLOCK(alchemy_usb_lock);
+
+
+static inline void __au1200_ohci_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
+		wmb();
+		udelay(2000);
+	} else {
+		__raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	}
+}
+
+static inline void __au1200_ehci_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	} else {
+		if (!(r & USBCFG_UCE))		/* UDC also off? */
+			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
+		__raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	}
+}
+
+static inline void __au1200_udc_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
+		wmb();
+	} else {
+		if (!(r & USBCFG_ECE))		/* EHCI also off? */
+			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
+		__raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
+		wmb();
+	}
+}
+
+static inline int au1200_coherency_bug(void)
+{
+#if defined(CONFIG_DMA_COHERENT)
+	/* Au1200 AB USB does not support coherent memory */
+	if (!(read_c0_prid() & 0xff)) {
+		printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
+		printk(KERN_INFO "Au1200 USB: update your board or re-configure"
+				 " the kernel\n");
+		return -ENODEV;
+	}
+#endif
+	return 0;
+}
+
+static inline int au1200_usb_control(int block, int enable)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		ret = au1200_coherency_bug();
+		if (ret && enable)
+			goto out;
+		__au1200_ohci_control(base, enable);
+		break;
+	case ALCHEMY_USB_UDC0:
+		__au1200_udc_control(base, enable);
+		break;
+	case ALCHEMY_USB_EHCI0:
+		ret = au1200_coherency_bug();
+		if (ret && enable)
+			goto out;
+		__au1200_ehci_control(base, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+out:
+	return ret;
+}
+
+
+/* initialize USB block(s) to a known working state */
+static inline void au1200_usb_init(void)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+	__raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
+	wmb();
+	udelay(1000);
+}
+
+static inline void au1000_usb_init(unsigned long rb, int reg)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
+	unsigned long r = __raw_readl(base);
+
+#if defined(__BIG_ENDIAN)
+	r |= USBHEN_BE;
+#endif
+	r |= USBHEN_C;
+
+	__raw_writel(r, base);
+	wmb();
+	udelay(1000);
+}
+
+
+static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
+	unsigned long r = __raw_readl(base + creg);
+
+	if (enable) {
+		__raw_writel(r | USBHEN_CE, base + creg);
+		wmb();
+		udelay(1000);
+		__raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
+		wmb();
+		udelay(1000);
+
+		/* wait for reset complete (read reg twice: au1500 erratum) */
+		while (__raw_readl(base + creg),
+			!(__raw_readl(base + creg) & USBHEN_RD))
+			udelay(1000);
+	} else {
+		__raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
+		wmb();
+	}
+}
+
+static inline int au1000_usb_control(int block, int enable, unsigned long rb,
+				     int creg)
+{
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1xx0_ohci_control(enable, rb, creg);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+/*
+ * alchemy_usb_control - control Alchemy on-chip USB blocks
+ * @block:	USB block to target
+ * @enable:	set 1 to enable a block, 0 to disable
+ */
+int alchemy_usb_control(int block, int enable)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&alchemy_usb_lock, flags);
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		ret = au1000_usb_control(block, enable,
+				AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		ret = au1000_usb_control(block, enable,
+				AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		ret = au1200_usb_control(block, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	spin_unlock_irqrestore(&alchemy_usb_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(alchemy_usb_control);
+
+
+static unsigned long alchemy_usb_pmdata[2];
+
+static void au1000_usb_pm(unsigned long br, int creg, int susp)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(br);
+
+	if (susp) {
+		alchemy_usb_pmdata[0] = __raw_readl(base + creg);
+		/* There appears to be some undocumented reset register.... */
+		__raw_writel(0, base + 0x04);
+		wmb();
+		__raw_writel(0, base + creg);
+		wmb();
+	} else {
+		__raw_writel(alchemy_usb_pmdata[0], base + creg);
+		wmb();
+	}
+}
+
+static void au1200_usb_pm(int susp)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
+	if (susp) {
+		/* save OTG_CAP/MUX registers which indicate port routing */
+		/* FIXME: write an OTG driver to do that */
+		alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
+		alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
+	} else {
+		/* restore access to all MMIO areas */
+		au1200_usb_init();
+
+		/* restore OTG_CAP/MUX registers */
+		__raw_writel(alchemy_usb_pmdata[0], base + 0x00);
+		__raw_writel(alchemy_usb_pmdata[1], base + 0x04);
+		wmb();
+	}
+}
+
+static void alchemy_usb_pm(int susp)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1200_usb_pm(susp);
+		break;
+	}
+}
+
+static int alchemy_usb_suspend(void)
+{
+	alchemy_usb_pm(1);
+	return 0;
+}
+
+static void alchemy_usb_resume(void)
+{
+	alchemy_usb_pm(0);
+}
+
+static struct syscore_ops alchemy_usb_pm_ops = {
+	.suspend	= alchemy_usb_suspend,
+	.resume		= alchemy_usb_resume,
+};
+
+static int __init alchemy_usb_init(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1200_usb_init();
+		break;
+	}
+
+	register_syscore_ops(&alchemy_usb_pm_ops);
+
+	return 0;
+}
+arch_initcall(alchemy_usb_init);
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 65719e8..18bafa9 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -14,61 +14,9 @@
 #include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 
-#define USB_HOST_CONFIG   (USB_MSR_BASE + USB_MSR_MCFG)
-#define USB_MCFG_PFEN     (1<<31)
-#define USB_MCFG_RDCOMB   (1<<30)
-#define USB_MCFG_SSDEN    (1<<23)
-#define USB_MCFG_PHYPLLEN (1<<19)
-#define USB_MCFG_UCECLKEN (1<<18)
-#define USB_MCFG_EHCCLKEN (1<<17)
-#ifdef CONFIG_DMA_COHERENT
-#define USB_MCFG_UCAM     (1<<7)
-#else
-#define USB_MCFG_UCAM     (0)
-#endif
-#define USB_MCFG_EBMEN    (1<<3)
-#define USB_MCFG_EMEMEN   (1<<2)
-
-#define USBH_ENABLE_CE	(USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN)
-#define USBH_ENABLE_INIT (USB_MCFG_PFEN  | USB_MCFG_RDCOMB |	\
-			  USBH_ENABLE_CE | USB_MCFG_SSDEN  |	\
-			  USB_MCFG_UCAM  | USB_MCFG_EBMEN  |	\
-			  USB_MCFG_EMEMEN)
-
-#define USBH_DISABLE      (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
 
 extern int usb_disabled(void);
 
-static void au1xxx_start_ehc(void)
-{
-	/* enable clock to EHCI block and HS PHY PLL*/
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	/* enable EHCI mmio */
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-}
-
-static void au1xxx_stop_ehc(void)
-{
-	unsigned long c;
-
-	/* Disable mem */
-	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	/* Disable EHC clock. If the HS PHY is unused disable it too. */
-	c = au_readl(USB_HOST_CONFIG) & ~USB_MCFG_EHCCLKEN;
-	if (!(c & USB_MCFG_UCECLKEN))		/* UDC disabled? */
-		c &= ~USB_MCFG_PHYPLLEN;	/* yes: disable HS PHY PLL */
-	au_writel(c, USB_HOST_CONFIG);
-	au_sync();
-}
-
 static int au1xxx_ehci_setup(struct usb_hcd *hcd)
 {
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -136,16 +84,6 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 	if (usb_disabled())
 		return -ENODEV;
 
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
-	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & 0xff)) {
-		printk(KERN_INFO "%s: this is chip revision AB!\n", pdev->name);
-		printk(KERN_INFO "%s: update your board or re-configure"
-				 " the kernel\n", pdev->name);
-		return -ENODEV;
-	}
-#endif
-
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 		pr_debug("resource[1] is not IORESOURCE_IRQ");
 		return -ENOMEM;
@@ -171,7 +109,11 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
-	au1xxx_start_ehc();
+	if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) {
+		printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
+		ret = -ENODEV;
+		goto err3;
+	}
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = hcd->regs;
@@ -187,7 +129,8 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	au1xxx_stop_ehc();
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -201,10 +144,10 @@ static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	usb_remove_hcd(hcd);
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
-	au1xxx_stop_ehc();
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
@@ -236,7 +179,7 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 	// could save FLADJ in case of Vaux power loss
 	// ... we'd only use it to handle clock skew
 
-	au1xxx_stop_ehc();
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
 
 	return rc;
 }
@@ -246,7 +189,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
-	au1xxx_start_ehc();
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
 
 	// maybe restore FLADJ
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 59e8161..3ff9f82 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1224,7 +1224,7 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_hcd_sh_driver
 #endif
 
-#ifdef CONFIG_SOC_AU1200
+#ifdef CONFIG_MIPS_ALCHEMY
 #include "ehci-au1xxx.c"
 #define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
 #endif
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 6b7bc50..9b66df8 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -23,92 +23,9 @@
 
 #include <asm/mach-au1x00/au1000.h>
 
-#ifndef	CONFIG_SOC_AU1200
-
-#define USBH_ENABLE_BE (1<<0)
-#define USBH_ENABLE_C  (1<<1)
-#define USBH_ENABLE_E  (1<<2)
-#define USBH_ENABLE_CE (1<<3)
-#define USBH_ENABLE_RD (1<<4)
-
-#ifdef __LITTLE_ENDIAN
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
-#elif defined(__BIG_ENDIAN)
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \
-			  USBH_ENABLE_BE)
-#else
-#error not byte order defined
-#endif
-
-#else   /* Au1200 */
-
-#define USB_HOST_CONFIG    (USB_MSR_BASE + USB_MSR_MCFG)
-#define USB_MCFG_PFEN     (1<<31)
-#define USB_MCFG_RDCOMB   (1<<30)
-#define USB_MCFG_SSDEN    (1<<23)
-#define USB_MCFG_OHCCLKEN (1<<16)
-#ifdef CONFIG_DMA_COHERENT
-#define USB_MCFG_UCAM     (1<<7)
-#else
-#define USB_MCFG_UCAM     (0)
-#endif
-#define USB_MCFG_OBMEN    (1<<1)
-#define USB_MCFG_OMEMEN   (1<<0)
-
-#define USBH_ENABLE_CE    USB_MCFG_OHCCLKEN
-
-#define USBH_ENABLE_INIT  (USB_MCFG_PFEN  | USB_MCFG_RDCOMB 	|	\
-			   USBH_ENABLE_CE | USB_MCFG_SSDEN	|	\
-			   USB_MCFG_UCAM  |				\
-			   USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
-
-#define USBH_DISABLE      (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
-
-#endif  /* Au1200 */
 
 extern int usb_disabled(void);
 
-static void au1xxx_start_ohc(void)
-{
-	/* enable host controller */
-#ifndef CONFIG_SOC_AU1200
-	au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	/* wait for reset complete (read register twice; see au1500 errata) */
-	while (au_readl(USB_HOST_CONFIG),
-		!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
-		udelay(1000);
-
-#else   /* Au1200 */
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
-	au_sync();
-	udelay(2000);
-#endif  /* Au1200 */
-}
-
-static void au1xxx_stop_ohc(void)
-{
-#ifdef CONFIG_SOC_AU1200
-	/* Disable mem */
-	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-#endif
-	/* Disable clock */
-	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-}
-
 static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
 {
 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
@@ -178,17 +95,6 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 	if (usb_disabled())
 		return -ENODEV;
 
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
-	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & 0xff)) {
-		printk(KERN_INFO "%s: this is chip revision AB !!\n",
-			pdev->name);
-		printk(KERN_INFO "%s: update your board or re-configure "
-				 "the kernel\n", pdev->name);
-		return -ENODEV;
-	}
-#endif
-
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 		pr_debug("resource[1] is not IORESOURCE_IRQ\n");
 		return -ENOMEM;
@@ -214,7 +120,12 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
-	au1xxx_start_ohc();
+	if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) {
+		printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
+		ret = -ENODEV;
+		goto err3;
+	}
+
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
 	ret = usb_add_hcd(hcd, pdev->resource[1].start,
@@ -224,7 +135,8 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	au1xxx_stop_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
+err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -238,7 +150,7 @@ static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	usb_remove_hcd(hcd);
-	au1xxx_stop_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
@@ -275,7 +187,7 @@ static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
 
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
-	au1xxx_stop_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
 bail:
 	spin_unlock_irqrestore(&ohci->lock, flags);
 
@@ -286,7 +198,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 
-	au1xxx_start_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 1);
 
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 	ohci_finish_controller_resume(hcd);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8165c55..d83e967 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1753,7 +1753,7 @@ endchoice
 
 config FB_AU1100
 	bool "Au1100 LCD Driver"
-	depends on (FB = y) && MIPS && SOC_AU1100
+	depends on (FB = y) && MIPS_ALCHEMY
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1764,7 +1764,7 @@ config FB_AU1100
 
 config FB_AU1200
 	bool "Au1200 LCD Driver"
-	depends on (FB = y) && MIPS && SOC_AU1200
+	depends on (FB = y) && MIPS_ALCHEMY
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT