Merge tag 'iio-fixes-for-4.1a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

The usual mixed bag of fixes for IIO in the 4.1 cycle.

Second version of this pull request as a small fix to a fix turned
up before Greg pulled it for a cc10001 patch near the top of the tree.

One core fix

* Set updated for a iio kfifo was incorrectly set to false during a failed
  update, resulting in atttempts to repeat the failed operation appearing
  to succeed.

This time I've decided to list the driver fixes in alphabetical order rather
than 'randomly'.

* axp288_adc - a recent change added a check for valid info masks when
  reading channels from consumer drivers.
* bmp280 - temperature compensation was failing to read the tfine value, hence
  causing a temperature of 0 to always be returned and incorrect presure
  measurements.
* cc10001 - Fix channel number mapping when some channels are reserved for
  remote CPUs. Fix an issue with the use of the power-up/power-down register
  (basically wrong polarity). Fix an issue due to the missinterpretting the
  return value from regulator_get_voltage. Add a delay before the start bit
  as recommended for the hardware to avoid data corruption.
* hid pressure - fix channel spec of modfiied, but no modifier (which makes no
  sense!)
* hid proximity - fix channel spec of modified, but no modifier (which makes
  no sense!). Fix a memory leak in the probe function.
* mcp320x - occasional incorrect readings on dma using spi busses due to
  cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
* mma9551 - buffer overrun fix (miss specified maximum length of buffers)
* mma9553 - endian fix on status message. Add an enable element for activity
  channel. Input checking for activity period to avoid rather unpredictable
  results.
* spmi-vadc - fix an overflow in the output value normalization seen on some
  boards.
* st-snesors - oops due to use of a mutex that is not yet initialized during
  probe.
* xilinx adc - Some wrong register addresses, a wrong address for vccaux
  channel, incorrect scale on VREFP and incorrect sign on VREFN.

17 files changed, 93 insertions, 66 deletions

diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c
index 7f55a6d..c6d5a3a 100644
--- a/drivers/iio/accel/mma9551_core.c
+++ b/drivers/iio/accel/mma9551_core.c
@@ -389,7 +389,12 @@ int mma9551_read_config_words(struct i2c_client *client, u8 app_id,
 {
 	int ret, i;
 	int len_words = len / sizeof(u16);
-	__be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS];
+	__be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2];
+
+	if (len_words > ARRAY_SIZE(be_buf)) {
+		dev_err(&client->dev, "Invalid buffer size %d\n", len);
+		return -EINVAL;
+	}
 
 	ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG,
 			       reg, NULL, 0, (u8 *) be_buf, len);
@@ -424,7 +429,12 @@ int mma9551_read_status_words(struct i2c_client *client, u8 app_id,
 {
 	int ret, i;
 	int len_words = len / sizeof(u16);
-	__be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS];
+	__be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2];
+
+	if (len_words > ARRAY_SIZE(be_buf)) {
+		dev_err(&client->dev, "Invalid buffer size %d\n", len);
+		return -EINVAL;
+	}
 
 	ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS,
 			       reg, NULL, 0, (u8 *) be_buf, len);
@@ -459,7 +469,12 @@ int mma9551_write_config_words(struct i2c_client *client, u8 app_id,
 {
 	int i;
 	int len_words = len / sizeof(u16);
-	__be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS];
+	__be16 be_buf[(MMA9551_MAX_MAILBOX_DATA_REGS - 1) / 2];
+
+	if (len_words > ARRAY_SIZE(be_buf)) {
+		dev_err(&client->dev, "Invalid buffer size %d\n", len);
+		return -EINVAL;
+	}
 
 	for (i = 0; i < len_words; i++)
 		be_buf[i] = cpu_to_be16(buf[i]);
diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
index 2df1af7..365a109 100644
--- a/drivers/iio/accel/mma9553.c
+++ b/drivers/iio/accel/mma9553.c
@@ -54,6 +54,7 @@
 #define MMA9553_MASK_CONF_STEPCOALESCE		GENMASK(7, 0)
 
 #define MMA9553_REG_CONF_ACTTHD			0x0E
+#define MMA9553_MAX_ACTTHD			GENMASK(15, 0)
 
 /* Pedometer status registers (R-only) */
 #define MMA9553_REG_STATUS			0x00
@@ -316,22 +317,19 @@ static int mma9553_set_config(struct mma9553_data *data, u16 reg,
 static int mma9553_read_activity_stepcnt(struct mma9553_data *data,
 					 u8 *activity, u16 *stepcnt)
 {
-	u32 status_stepcnt;
-	u16 status;
+	u16 buf[2];
 	int ret;
 
 	ret = mma9551_read_status_words(data->client, MMA9551_APPID_PEDOMETER,
-					MMA9553_REG_STATUS, sizeof(u32),
-					(u16 *) &status_stepcnt);
+					MMA9553_REG_STATUS, sizeof(u32), buf);
 	if (ret < 0) {
 		dev_err(&data->client->dev,
 			"error reading status and stepcnt\n");
 		return ret;
 	}
 
-	status = status_stepcnt & MMA9553_MASK_CONF_WORD;
-	*activity = mma9553_get_bits(status, MMA9553_MASK_STATUS_ACTIVITY);
-	*stepcnt = status_stepcnt >> 16;
+	*activity = mma9553_get_bits(buf[0], MMA9553_MASK_STATUS_ACTIVITY);
+	*stepcnt = buf[1];
 
 	return 0;
 }
@@ -872,6 +870,9 @@ static int mma9553_write_event_value(struct iio_dev *indio_dev,
 	case IIO_EV_INFO_PERIOD:
 		switch (chan->type) {
 		case IIO_ACTIVITY:
+			if (val < 0 || val > MMA9553_ACTIVITY_THD_TO_SEC(
+			    MMA9553_MAX_ACTTHD))
+				return -EINVAL;
 			mutex_lock(&data->mutex);
 			ret = mma9553_set_config(data, MMA9553_REG_CONF_ACTTHD,
 						 &data->conf.actthd,
@@ -971,7 +972,8 @@ static const struct iio_chan_spec_ext_info mma9553_ext_info[] = {
 	.modified = 1,							\
 	.channel2 = _chan2,						\
 	.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),		\
-	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT),	\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT) |	\
+				    BIT(IIO_CHAN_INFO_ENABLE),		\
 	.event_spec = mma9553_activity_events,				\
 	.num_event_specs = ARRAY_SIZE(mma9553_activity_events),		\
 	.ext_info = mma9553_ext_info,					\
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 58d1d13..211b132 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -546,6 +546,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &accel_info;
+	mutex_init(&adata->tb.buf_lock);
 
 	st_sensors_power_enable(indio_dev);
 
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 08bcfb0..56008a8 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -53,39 +53,42 @@ static const struct iio_chan_spec const axp288_adc_channels[] = {
 		.channel = 0,
 		.address = AXP288_TS_ADC_H,
 		.datasheet_name = "TS_PIN",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_TEMP,
 		.channel = 1,
 		.address = AXP288_PMIC_ADC_H,
 		.datasheet_name = "PMIC_TEMP",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_TEMP,
 		.channel = 2,
 		.address = AXP288_GP_ADC_H,
 		.datasheet_name = "GPADC",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_CURRENT,
 		.channel = 3,
 		.address = AXP20X_BATT_CHRG_I_H,
 		.datasheet_name = "BATT_CHG_I",
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_CURRENT,
 		.channel = 4,
 		.address = AXP20X_BATT_DISCHRG_I_H,
 		.datasheet_name = "BATT_DISCHRG_I",
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_VOLTAGE,
 		.channel = 5,
 		.address = AXP20X_BATT_V_H,
 		.datasheet_name = "BATT_V",
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	},
 };
 
@@ -151,9 +154,6 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 						chan->address))
 			dev_err(&indio_dev->dev, "TS pin restore\n");
 		break;
-	case IIO_CHAN_INFO_PROCESSED:
-		ret = axp288_adc_read_channel(val, chan->address, info->regmap);
-		break;
 	default:
 		ret = -EINVAL;
 	}
diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c
index 51e2a83..115f6e9 100644
--- a/drivers/iio/adc/cc10001_adc.c
+++ b/drivers/iio/adc/cc10001_adc.c
@@ -35,8 +35,9 @@
 #define CC10001_ADC_EOC_SET		BIT(0)
 
 #define CC10001_ADC_CHSEL_SAMPLED	0x0c
-#define CC10001_ADC_POWER_UP		0x10
-#define CC10001_ADC_POWER_UP_SET	BIT(0)
+#define CC10001_ADC_POWER_DOWN		0x10
+#define CC10001_ADC_POWER_DOWN_SET	BIT(0)
+
 #define CC10001_ADC_DEBUG		0x14
 #define CC10001_ADC_DATA_COUNT		0x20
 
@@ -62,7 +63,6 @@ struct cc10001_adc_device {
 	u16 *buf;
 
 	struct mutex lock;
-	unsigned long channel_map;
 	unsigned int start_delay_ns;
 	unsigned int eoc_delay_ns;
 };
@@ -79,6 +79,18 @@ static inline u32 cc10001_adc_read_reg(struct cc10001_adc_device *adc_dev,
 	return readl(adc_dev->reg_base + reg);
 }
 
+static void cc10001_adc_power_up(struct cc10001_adc_device *adc_dev)
+{
+	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN, 0);
+	ndelay(adc_dev->start_delay_ns);
+}
+
+static void cc10001_adc_power_down(struct cc10001_adc_device *adc_dev)
+{
+	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN,
+			      CC10001_ADC_POWER_DOWN_SET);
+}
+
 static void cc10001_adc_start(struct cc10001_adc_device *adc_dev,
 			      unsigned int channel)
 {
@@ -88,6 +100,7 @@ static void cc10001_adc_start(struct cc10001_adc_device *adc_dev,
 	val = (channel & CC10001_ADC_CH_MASK) | CC10001_ADC_MODE_SINGLE_CONV;
 	cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val);
 
+	udelay(1);
 	val = cc10001_adc_read_reg(adc_dev, CC10001_ADC_CONFIG);
 	val = val | CC10001_ADC_START_CONV;
 	cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val);
@@ -129,6 +142,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
 	struct iio_dev *indio_dev;
 	unsigned int delay_ns;
 	unsigned int channel;
+	unsigned int scan_idx;
 	bool sample_invalid;
 	u16 *data;
 	int i;
@@ -139,20 +153,17 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
 
 	mutex_lock(&adc_dev->lock);
 
-	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP,
-			      CC10001_ADC_POWER_UP_SET);
-
-	/* Wait for 8 (6+2) clock cycles before activating START */
-	ndelay(adc_dev->start_delay_ns);
+	cc10001_adc_power_up(adc_dev);
 
 	/* Calculate delay step for eoc and sampled data */
 	delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT;
 
 	i = 0;
 	sample_invalid = false;
-	for_each_set_bit(channel, indio_dev->active_scan_mask,
+	for_each_set_bit(scan_idx, indio_dev->active_scan_mask,
 				  indio_dev->masklength) {
 
+		channel = indio_dev->channels[scan_idx].channel;
 		cc10001_adc_start(adc_dev, channel);
 
 		data[i] = cc10001_adc_poll_done(indio_dev, channel, delay_ns);
@@ -166,7 +177,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
 	}
 
 done:
-	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0);
+	cc10001_adc_power_down(adc_dev);
 
 	mutex_unlock(&adc_dev->lock);
 
@@ -185,11 +196,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev,
 	unsigned int delay_ns;
 	u16 val;
 
-	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP,
-			      CC10001_ADC_POWER_UP_SET);
-
-	/* Wait for 8 (6+2) clock cycles before activating START */
-	ndelay(adc_dev->start_delay_ns);
+	cc10001_adc_power_up(adc_dev);
 
 	/* Calculate delay step for eoc and sampled data */
 	delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT;
@@ -198,7 +205,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev,
 
 	val = cc10001_adc_poll_done(indio_dev, chan->channel, delay_ns);
 
-	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0);
+	cc10001_adc_power_down(adc_dev);
 
 	return val;
 }
@@ -224,7 +231,7 @@ static int cc10001_adc_read_raw(struct iio_dev *indio_dev,
 
 	case IIO_CHAN_INFO_SCALE:
 		ret = regulator_get_voltage(adc_dev->reg);
-		if (ret)
+		if (ret < 0)
 			return ret;
 
 		*val = ret / 1000;
@@ -255,22 +262,22 @@ static const struct iio_info cc10001_adc_info = {
 	.update_scan_mode = &cc10001_update_scan_mode,
 };
 
-static int cc10001_adc_channel_init(struct iio_dev *indio_dev)
+static int cc10001_adc_channel_init(struct iio_dev *indio_dev,
+				    unsigned long channel_map)
 {
-	struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
 	struct iio_chan_spec *chan_array, *timestamp;
 	unsigned int bit, idx = 0;
 
-	indio_dev->num_channels = bitmap_weight(&adc_dev->channel_map,
-						CC10001_ADC_NUM_CHANNELS);
+	indio_dev->num_channels = bitmap_weight(&channel_map,
+						CC10001_ADC_NUM_CHANNELS) + 1;
 
-	chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels + 1,
+	chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels,
 				  sizeof(struct iio_chan_spec),
 				  GFP_KERNEL);
 	if (!chan_array)
 		return -ENOMEM;
 
-	for_each_set_bit(bit, &adc_dev->channel_map, CC10001_ADC_NUM_CHANNELS) {
+	for_each_set_bit(bit, &channel_map, CC10001_ADC_NUM_CHANNELS) {
 		struct iio_chan_spec *chan = &chan_array[idx];
 
 		chan->type = IIO_VOLTAGE;
@@ -305,6 +312,7 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 	unsigned long adc_clk_rate;
 	struct resource *res;
 	struct iio_dev *indio_dev;
+	unsigned long channel_map;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
@@ -313,9 +321,9 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 
 	adc_dev = iio_priv(indio_dev);
 
-	adc_dev->channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0);
+	channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0);
 	if (!of_property_read_u32(node, "adc-reserved-channels", &ret))
-		adc_dev->channel_map &= ~ret;
+		channel_map &= ~ret;
 
 	adc_dev->reg = devm_regulator_get(&pdev->dev, "vref");
 	if (IS_ERR(adc_dev->reg))
@@ -361,7 +369,7 @@ static int cc10001_adc_probe(struct platform_device *pdev)
 	adc_dev->start_delay_ns = adc_dev->eoc_delay_ns * CC10001_WAIT_CYCLES;
 
 	/* Setup the ADC channels available on the device */
-	ret = cc10001_adc_channel_init(indio_dev);
+	ret = cc10001_adc_channel_init(indio_dev, channel_map);
 	if (ret < 0)
 		goto err_disable_clk;
 
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index efbfd12..8d9c9b9 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -60,12 +60,12 @@ struct mcp320x {
 	struct spi_message msg;
 	struct spi_transfer transfer[2];
 
-	u8 tx_buf;
-	u8 rx_buf[2];
-
 	struct regulator *reg;
 	struct mutex lock;
 	const struct mcp320x_chip_info *chip_info;
+
+	u8 tx_buf ____cacheline_aligned;
+	u8 rx_buf[2];
 };
 
 static int mcp320x_channel_to_tx_data(int device_index,
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index 3211729..0c4618b 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -18,6 +18,7 @@
 #include <linux/iio/iio.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
+#include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -471,11 +472,11 @@ static s32 vadc_calibrate(struct vadc_priv *vadc,
 			  const struct vadc_channel_prop *prop, u16 adc_code)
 {
 	const struct vadc_prescale_ratio *prescale;
-	s32 voltage;
+	s64 voltage;
 
 	voltage = adc_code - vadc->graph[prop->calibration].gnd;
 	voltage *= vadc->graph[prop->calibration].dx;
-	voltage = voltage / vadc->graph[prop->calibration].dy;
+	voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy);
 
 	if (prop->calibration == VADC_CALIB_ABSOLUTE)
 		voltage += vadc->graph[prop->calibration].dx;
@@ -487,7 +488,7 @@ static s32 vadc_calibrate(struct vadc_priv *vadc,
 
 	voltage = voltage * prescale->den;
 
-	return voltage / prescale->num;
+	return div64_s64(voltage, prescale->num);
 }
 
 static int vadc_decimation_from_dt(u32 value)
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index a221f73..ce93bd8 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -856,6 +856,7 @@ static int xadc_read_raw(struct iio_dev *indio_dev,
 			switch (chan->address) {
 			case XADC_REG_VCCINT:
 			case XADC_REG_VCCAUX:
+			case XADC_REG_VREFP:
 			case XADC_REG_VCCBRAM:
 			case XADC_REG_VCCPINT:
 			case XADC_REG_VCCPAUX:
@@ -996,7 +997,7 @@ static const struct iio_event_spec xadc_voltage_events[] = {
 	.num_event_specs = (_alarm) ? ARRAY_SIZE(xadc_voltage_events) : 0, \
 	.scan_index = (_scan_index), \
 	.scan_type = { \
-		.sign = 'u', \
+		.sign = ((_addr) == XADC_REG_VREFN) ? 's' : 'u', \
 		.realbits = 12, \
 		.storagebits = 16, \
 		.shift = 4, \
@@ -1008,7 +1009,7 @@ static const struct iio_event_spec xadc_voltage_events[] = {
 static const struct iio_chan_spec xadc_channels[] = {
 	XADC_CHAN_TEMP(0, 8, XADC_REG_TEMP),
 	XADC_CHAN_VOLTAGE(0, 9, XADC_REG_VCCINT, "vccint", true),
-	XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCINT, "vccaux", true),
+	XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCAUX, "vccaux", true),
 	XADC_CHAN_VOLTAGE(2, 14, XADC_REG_VCCBRAM, "vccbram", true),
 	XADC_CHAN_VOLTAGE(3, 5, XADC_REG_VCCPINT, "vccpint", true),
 	XADC_CHAN_VOLTAGE(4, 6, XADC_REG_VCCPAUX, "vccpaux", true),
diff --git a/drivers/iio/adc/xilinx-xadc.h b/drivers/iio/adc/xilinx-xadc.h
index c7487e8..54adc50 100644
--- a/drivers/iio/adc/xilinx-xadc.h
+++ b/drivers/iio/adc/xilinx-xadc.h
@@ -145,9 +145,9 @@ static inline int xadc_write_adc_reg(struct xadc *xadc, unsigned int reg,
 #define XADC_REG_MAX_VCCPINT	0x28
 #define XADC_REG_MAX_VCCPAUX	0x29
 #define XADC_REG_MAX_VCCO_DDR	0x2a
-#define XADC_REG_MIN_VCCPINT	0x2b
-#define XADC_REG_MIN_VCCPAUX	0x2c
-#define XADC_REG_MIN_VCCO_DDR	0x2d
+#define XADC_REG_MIN_VCCPINT	0x2c
+#define XADC_REG_MIN_VCCPAUX	0x2d
+#define XADC_REG_MIN_VCCO_DDR	0x2e
 
 #define XADC_REG_CONF0		0x40
 #define XADC_REG_CONF1		0x41
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index edd13d2..8dd0477 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -304,8 +304,6 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
 	struct st_sensors_platform_data *of_pdata;
 	int err = 0;
 
-	mutex_init(&sdata->tb.buf_lock);
-
 	/* If OF/DT pdata exists, it will take precedence of anything else */
 	of_pdata = st_sensors_of_probe(indio_dev->dev.parent, pdata);
 	if (of_pdata)
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 21395f2..ffe9664 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -400,6 +400,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &gyro_info;
+	mutex_init(&gdata->tb.buf_lock);
 
 	st_sensors_power_enable(indio_dev);
 
diff --git a/drivers/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c
index 847ca56..55c267b 100644
--- a/drivers/iio/kfifo_buf.c
+++ b/drivers/iio/kfifo_buf.c
@@ -38,7 +38,8 @@ static int iio_request_update_kfifo(struct iio_buffer *r)
 		kfifo_free(&buf->kf);
 		ret = __iio_allocate_kfifo(buf, buf->buffer.bytes_per_datum,
 				   buf->buffer.length);
-		buf->update_needed = false;
+		if (ret >= 0)
+			buf->update_needed = false;
 	} else {
 		kfifo_reset_out(&buf->kf);
 	}
diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c
index 91ecc46..ef60bae 100644
--- a/drivers/iio/light/hid-sensor-prox.c
+++ b/drivers/iio/light/hid-sensor-prox.c
@@ -43,8 +43,6 @@ struct prox_state {
 static const struct iio_chan_spec prox_channels[] = {
 	{
 		.type = IIO_PROXIMITY,
-		.modified = 1,
-		.channel2 = IIO_NO_MOD,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 		BIT(IIO_CHAN_INFO_SCALE) |
@@ -253,7 +251,6 @@ static int hid_prox_probe(struct platform_device *pdev)
 	struct iio_dev *indio_dev;
 	struct prox_state *prox_state;
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
-	struct iio_chan_spec *channels;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev,
 				sizeof(struct prox_state));
@@ -272,20 +269,21 @@ static int hid_prox_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	channels = kmemdup(prox_channels, sizeof(prox_channels), GFP_KERNEL);
-	if (!channels) {
+	indio_dev->channels = kmemdup(prox_channels, sizeof(prox_channels),
+				      GFP_KERNEL);
+	if (!indio_dev->channels) {
 		dev_err(&pdev->dev, "failed to duplicate channels\n");
 		return -ENOMEM;
 	}
 
-	ret = prox_parse_report(pdev, hsdev, channels,
+	ret = prox_parse_report(pdev, hsdev,
+				(struct iio_chan_spec *)indio_dev->channels,
 				HID_USAGE_SENSOR_PROX, prox_state);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to setup attributes\n");
 		goto error_free_dev_mem;
 	}
 
-	indio_dev->channels = channels;
 	indio_dev->num_channels =
 				ARRAY_SIZE(prox_channels);
 	indio_dev->dev.parent = &pdev->dev;
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 8ade473..2e56f81 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -369,6 +369,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &magn_info;
+	mutex_init(&mdata->tb.buf_lock);
 
 	st_sensors_power_enable(indio_dev);
 
diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c
index 7c623e2..a2602d8 100644
--- a/drivers/iio/pressure/bmp280.c
+++ b/drivers/iio/pressure/bmp280.c
@@ -172,6 +172,7 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data,
 	var2 = (((((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1]))) *
 		  ((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1])))) >> 12) *
 		((s32)(s16)le16_to_cpu(buf[T3]))) >> 14;
+	data->t_fine = var1 + var2;
 
 	return (data->t_fine * 5 + 128) >> 8;
 }
diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c
index 7bb8d4c..3cf0bd6 100644
--- a/drivers/iio/pressure/hid-sensor-press.c
+++ b/drivers/iio/pressure/hid-sensor-press.c
@@ -47,8 +47,6 @@ struct press_state {
 static const struct iio_chan_spec press_channels[] = {
 	{
 		.type = IIO_PRESSURE,
-		.modified = 1,
-		.channel2 = IIO_NO_MOD,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 		BIT(IIO_CHAN_INFO_SCALE) |
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 97baf40d..e881fa6 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -417,6 +417,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &press_info;
+	mutex_init(&press_data->tb.buf_lock);
 
 	st_sensors_power_enable(indio_dev);