diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-02 20:24:47 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-02 20:24:47 (GMT) |
commit | 22237d5a588cfad92525d2998ff14d3666399dce (patch) | |
tree | 0f76b3a9febe573702669628fadaaab6c5725634 /drivers | |
parent | fc76a258d41eea7953bb763397c3d1e589d3bb98 (diff) | |
parent | 6b9a39de73490abb93a0b48a5e6c417c518f3a59 (diff) | |
download | linux-22237d5a588cfad92525d2998ff14d3666399dce.tar.xz |
Merge tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann:
"These are various bug fixes that were not considered important enough
for merging into 3.10.
The majority of the ARM fixes are for the OMAP and at91 platforms, and
there is another set of bug fixes for device drivers that resolve
'randconfig' build errors and that the subsystem maintainers either
did not pick up or preferred to get merged through the arm-soc tree."
* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: at91/PMC: use at91_usb_rate() for UTMI PLL
ARM: at91/PMC: fix at91sam9n12 USB FS init
ARM: at91/PMC: at91sam9n12 family has a PLLB
ARM: at91/PMC: sama5d3 family doesn't have a PLLB
ARM: tegra: fix section mismatch in tegra_pmc_parse_dt
ARM: mxs: don't select HAVE_PWM
ARM: mxs: stub out mxs_pm_init for !CONFIG_PM
cpuidle: calxeda: select ARM_CPU_SUSPEND
ARM: mvebu: fix length of ethernet registers in mv78260 dtsi
ARM: at91: cpuidle: Fix target_residency
ARM: at91: fix at91_extern_irq usage for non-dt boards
ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary
clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change
X.509: do not emit any informational output
mtd: omap2: allow bulding as a module
[SCSI] nsp32: use mdelay instead of large udelay constants
hwrng: bcm2835: fix MODULE_LICENSE tag
ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED
ARM: at91: Fix link breakage when !CONFIG_PHYLIB
MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES
...
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/char/hw_random/bcm2835-rng.c | 2 | ||||
-rw-r--r-- | drivers/clk/Makefile | 2 | ||||
-rw-r--r-- | drivers/clocksource/bcm_kona_timer.c | 15 | ||||
-rw-r--r-- | drivers/cpuidle/Kconfig | 1 | ||||
-rw-r--r-- | drivers/gpio/gpio-msm-v1.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/Kconfig | 2 | ||||
-rw-r--r-- | drivers/irqchip/irq-renesas-irqc.c | 4 | ||||
-rw-r--r-- | drivers/mtd/nand/Kconfig | 2 | ||||
-rw-r--r-- | drivers/scsi/nsp32.c | 2 | ||||
-rw-r--r-- | drivers/spi/Kconfig | 2 | ||||
-rw-r--r-- | drivers/ssbi/ssbi.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/Kconfig | 2 |
12 files changed, 16 insertions, 21 deletions
diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c index eb7f147..43577ca 100644 --- a/drivers/char/hw_random/bcm2835-rng.c +++ b/drivers/char/hw_random/bcm2835-rng.c @@ -110,4 +110,4 @@ module_platform_driver(bcm2835_rng_driver); MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); MODULE_DESCRIPTION("BCM2835 Random Number Generator (RNG) driver"); -MODULE_LICENSE("GPLv2"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 137d3e7..f0e4699 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-$(CONFIG_ARCH_U300) += clk-u300.o obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/ -obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o +obj-$(CONFIG_ARCH_SIRF) += clk-prima2.o obj-$(CONFIG_PLAT_ORION) += mvebu/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c index 350f493..ba3d859 100644 --- a/drivers/clocksource/bcm_kona_timer.c +++ b/drivers/clocksource/bcm_kona_timer.c @@ -103,16 +103,10 @@ static const struct of_device_id bcm_timer_ids[] __initconst = { {}, }; -static void __init kona_timers_init(void) +static void __init kona_timers_init(struct device_node *node) { - struct device_node *node; u32 freq; - node = of_find_matching_node(NULL, bcm_timer_ids); - - if (!node) - panic("No timer"); - if (!of_property_read_u32(node, "clock-frequency", &freq)) arch_timer_rate = freq; else @@ -199,13 +193,12 @@ static struct irqaction kona_timer_irq = { .handler = kona_timer_interrupt, }; -static void __init kona_timer_init(void) +static void __init kona_timer_init(struct device_node *node) { - kona_timers_init(); + kona_timers_init(node); kona_timer_clockevents_init(); setup_irq(timers.tmr_irq, &kona_timer_irq); kona_timer_set_next_event((arch_timer_rate / HZ), NULL); } -CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", - kona_timer_init); +CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init); diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index c4cc27e..e21cdfa 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -36,6 +36,7 @@ if CPU_IDLE config CPU_IDLE_CALXEDA bool "CPU Idle Driver for Calxeda processors" depends on ARCH_HIGHBANK + select ARM_CPU_SUSPEND help Select this to enable cpuidle on Calxeda processors. diff --git a/drivers/gpio/gpio-msm-v1.c b/drivers/gpio/gpio-msm-v1.c index c798585..fb2cc90 100644 --- a/drivers/gpio/gpio-msm-v1.c +++ b/drivers/gpio/gpio-msm-v1.c @@ -630,7 +630,7 @@ static struct irq_chip msm_gpio_irq_chip = { .irq_set_type = msm_gpio_irq_set_type, }; -static int __devinit gpio_msm_v1_probe(struct platform_device *pdev) +static int gpio_msm_v1_probe(struct platform_device *pdev) { int i, j = 0; const struct platform_device_id *dev_id = platform_get_device_id(pdev); diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 631736e..73e2e7d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -685,7 +685,7 @@ config I2C_SIMTEC config I2C_SIRF tristate "CSR SiRFprimaII I2C interface" - depends on ARCH_PRIMA2 + depends on ARCH_SIRF help If you say yes to this option, support will be included for the CSR SiRFprimaII I2C interface. diff --git a/drivers/irqchip/irq-renesas-irqc.c b/drivers/irqchip/irq-renesas-irqc.c index 927bff3..2f404ba 100644 --- a/drivers/irqchip/irq-renesas-irqc.c +++ b/drivers/irqchip/irq-renesas-irqc.c @@ -248,8 +248,8 @@ static int irqc_probe(struct platform_device *pdev) return 0; err3: - for (; k >= 0; k--) - free_irq(p->irq[k - 1].requested_irq, &p->irq[k - 1]); + while (--k >= 0) + free_irq(p->irq[k].requested_irq, &p->irq[k]); irq_domain_remove(p->irq_domain); err2: diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index a60f6c1..50543f1 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -95,7 +95,7 @@ config MTD_NAND_OMAP2 config MTD_NAND_OMAP_BCH depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3 - bool "Enable support for hardware BCH error correction" + tristate "Enable support for hardware BCH error correction" default n select BCH select BCH_CONST_PARAMS diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index 1e3879d..0665f9c 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -2899,7 +2899,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data) * reset SCSI bus */ nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST); - udelay(RESET_HOLD_TIME); + mdelay(RESET_HOLD_TIME / 1000); nsp32_write1(base, SCSI_BUS_CONTROL, 0); for(i = 0; i < 5; i++) { intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */ diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 92a9345..10f99f4 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -404,7 +404,7 @@ config SPI_SH_HSPI config SPI_SIRF tristate "CSR SiRFprimaII SPI controller" - depends on ARCH_PRIMA2 + depends on ARCH_SIRF select SPI_BITBANG help SPI driver for CSR SiRFprimaII SoCs diff --git a/drivers/ssbi/ssbi.c b/drivers/ssbi/ssbi.c index f32da02..e561d3b 100644 --- a/drivers/ssbi/ssbi.c +++ b/drivers/ssbi/ssbi.c @@ -350,6 +350,7 @@ static struct of_device_id ssbi_match_table[] = { { .compatible = "qcom,ssbi" }, {} }; +MODULE_DEVICE_TABLE(of, ssbi_match_table); static struct platform_driver ssbi_driver = { .probe = ssbi_probe, diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 46dd1c7..5e3d689 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -251,7 +251,7 @@ config SERIAL_SAMSUNG_CONSOLE config SERIAL_SIRFSOC tristate "SiRF SoC Platform Serial port support" - depends on ARCH_PRIMA2 + depends on ARCH_SIRF select SERIAL_CORE help Support for the on-chip UART on the CSR SiRFprimaII series, |