diff options
author | Guenter Roeck <guenter.roeck@ericsson.com> | 2010-09-30 03:12:08 (GMT) |
---|---|---|
committer | Guenter Roeck <guenter.roeck@ericsson.com> | 2011-03-15 05:36:25 (GMT) |
commit | 502b5a0199209001b34b623132ea313790acbd5d (patch) | |
tree | 4babcea2beef914a84862596391ba20df586c814 /drivers | |
parent | 4e9be650597bffec5885a8c1abad1e4ffb0bcca3 (diff) | |
download | linux-502b5a0199209001b34b623132ea313790acbd5d.tar.xz |
hwmon: Add support for Lineage Compact Power Line PEM devices
This patch adds support for hardware monitoring of Lineage Compact Power Line
Power Entry Modules.
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/hwmon/Kconfig | 11 | ||||
-rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
-rw-r--r-- | drivers/hwmon/lineage-pem.c | 589 |
3 files changed, 601 insertions, 0 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 3bd993b..d4ffc60 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -467,6 +467,17 @@ config SENSORS_JC42 This driver can also be built as a module. If so, the module will be called jc42. +config SENSORS_LINEAGE + tristate "Lineage Compact Power Line Power Entry Module" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Lineage Compact Power Line + series of DC/DC and AC/DC converters such as CP1800, CP2000AC, + CP2000DC, CP2725, and others. + + This driver can also be built as a module. If so, the module + will be called lineage-pem. + config SENSORS_LM63 tristate "National Semiconductor LM63 and LM64" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index f697831..4681981 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_SENSORS_JC42) += jc42.o obj-$(CONFIG_SENSORS_JZ4740) += jz4740-hwmon.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o +obj-$(CONFIG_SENSORS_LINEAGE) += lineage-pem.o obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d.o lis3lv02d_i2c.o diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c new file mode 100644 index 0000000..d39ee24 --- /dev/null +++ b/drivers/hwmon/lineage-pem.c @@ -0,0 +1,589 @@ +/* + * Driver for Lineage Compact Power Line series of power entry modules. + * + * Copyright (C) 2010, 2011 Ericsson AB. + * + * Documentation: + * http://www.lineagepower.com/oem/pdf/CPLI2C.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +/* + * This driver supports various Lineage Compact Power Line DC/DC and AC/DC + * converters such as CP1800, CP2000AC, CP2000DC, CP2100DC, and others. + * + * The devices are nominally PMBus compliant. However, most standard PMBus + * commands are not supported. Specifically, all hardware monitoring and + * status reporting commands are non-standard. For this reason, a standard + * PMBus driver can not be used. + * + * All Lineage CPL devices have a built-in I2C bus master selector (PCA9541). + * To ensure device access, this driver should only be used as client driver + * to the pca9541 I2C master selector driver. + */ + +/* Command codes */ +#define PEM_OPERATION 0x01 +#define PEM_CLEAR_INFO_FLAGS 0x03 +#define PEM_VOUT_COMMAND 0x21 +#define PEM_VOUT_OV_FAULT_LIMIT 0x40 +#define PEM_READ_DATA_STRING 0xd0 +#define PEM_READ_INPUT_STRING 0xdc +#define PEM_READ_FIRMWARE_REV 0xdd +#define PEM_READ_RUN_TIMER 0xde +#define PEM_FAN_HI_SPEED 0xdf +#define PEM_FAN_NORMAL_SPEED 0xe0 +#define PEM_READ_FAN_SPEED 0xe1 + +/* offsets in data string */ +#define PEM_DATA_STATUS_2 0 +#define PEM_DATA_STATUS_1 1 +#define PEM_DATA_ALARM_2 2 +#define PEM_DATA_ALARM_1 3 +#define PEM_DATA_VOUT_LSB 4 +#define PEM_DATA_VOUT_MSB 5 +#define PEM_DATA_CURRENT 6 +#define PEM_DATA_TEMP 7 + +/* Virtual entries, to report constants */ +#define PEM_DATA_TEMP_MAX 10 +#define PEM_DATA_TEMP_CRIT 11 + +/* offsets in input string */ +#define PEM_INPUT_VOLTAGE 0 +#define PEM_INPUT_POWER_LSB 1 +#define PEM_INPUT_POWER_MSB 2 + +/* offsets in fan data */ +#define PEM_FAN_ADJUSTMENT 0 +#define PEM_FAN_FAN1 1 +#define PEM_FAN_FAN2 2 +#define PEM_FAN_FAN3 3 + +/* Status register bits */ +#define STS1_OUTPUT_ON (1 << 0) +#define STS1_LEDS_FLASHING (1 << 1) +#define STS1_EXT_FAULT (1 << 2) +#define STS1_SERVICE_LED_ON (1 << 3) +#define STS1_SHUTDOWN_OCCURRED (1 << 4) +#define STS1_INT_FAULT (1 << 5) +#define STS1_ISOLATION_TEST_OK (1 << 6) + +#define STS2_ENABLE_PIN_HI (1 << 0) +#define STS2_DATA_OUT_RANGE (1 << 1) +#define STS2_RESTARTED_OK (1 << 1) +#define STS2_ISOLATION_TEST_FAIL (1 << 3) +#define STS2_HIGH_POWER_CAP (1 << 4) +#define STS2_INVALID_INSTR (1 << 5) +#define STS2_WILL_RESTART (1 << 6) +#define STS2_PEC_ERR (1 << 7) + +/* Alarm register bits */ +#define ALRM1_VIN_OUT_LIMIT (1 << 0) +#define ALRM1_VOUT_OUT_LIMIT (1 << 1) +#define ALRM1_OV_VOLT_SHUTDOWN (1 << 2) +#define ALRM1_VIN_OVERCURRENT (1 << 3) +#define ALRM1_TEMP_WARNING (1 << 4) +#define ALRM1_TEMP_SHUTDOWN (1 << 5) +#define ALRM1_PRIMARY_FAULT (1 << 6) +#define ALRM1_POWER_LIMIT (1 << 7) + +#define ALRM2_5V_OUT_LIMIT (1 << 1) +#define ALRM2_TEMP_FAULT (1 << 2) +#define ALRM2_OV_LOW (1 << 3) +#define ALRM2_DCDC_TEMP_HIGH (1 << 4) +#define ALRM2_PRI_TEMP_HIGH (1 << 5) +#define ALRM2_NO_PRIMARY (1 << 6) +#define ALRM2_FAN_FAULT (1 << 7) + +#define FIRMWARE_REV_LEN 4 +#define DATA_STRING_LEN 9 +#define INPUT_STRING_LEN 5 /* 4 for most devices */ +#define FAN_SPEED_LEN 5 + +struct pem_data { + struct device *hwmon_dev; + + struct mutex update_lock; + bool valid; + bool fans_supported; + int input_length; + unsigned long last_updated; /* in jiffies */ + + u8 firmware_rev[FIRMWARE_REV_LEN]; + u8 data_string[DATA_STRING_LEN]; + u8 input_string[INPUT_STRING_LEN]; + u8 fan_speed[FAN_SPEED_LEN]; +}; + +static int pem_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + u8 block_buffer[I2C_SMBUS_BLOCK_MAX]; + int result; + + result = i2c_smbus_read_block_data(client, command, block_buffer); + if (unlikely(result < 0)) + goto abort; + if (unlikely(result == 0xff || result != data_len)) { + result = -EIO; + goto abort; + } + memcpy(data, block_buffer, data_len); + result = 0; +abort: + return result; +} + +static struct pem_data *pem_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pem_data *data = i2c_get_clientdata(client); + struct pem_data *ret = data; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + int result; + + /* Read data string */ + result = pem_read_block(client, PEM_READ_DATA_STRING, + data->data_string, + sizeof(data->data_string)); + if (unlikely(result < 0)) { + ret = ERR_PTR(result); + goto abort; + } + + /* Read input string */ + if (data->input_length) { + result = pem_read_block(client, PEM_READ_INPUT_STRING, + data->input_string, + data->input_length); + if (unlikely(result < 0)) { + ret = ERR_PTR(result); + goto abort; + } + } + + /* Read fan speeds */ + if (data->fans_supported) { + result = pem_read_block(client, PEM_READ_FAN_SPEED, + data->fan_speed, + sizeof(data->fan_speed)); + if (unlikely(result < 0)) { + ret = ERR_PTR(result); + goto abort; + } + } + + i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS); + + data->last_updated = jiffies; + data->valid = 1; + } +abort: + mutex_unlock(&data->update_lock); + return ret; +} + +static long pem_get_data(u8 *data, int len, int index) +{ + long val; + + switch (index) { + case PEM_DATA_VOUT_LSB: + val = (data[index] + (data[index+1] << 8)) * 5 / 2; + break; + case PEM_DATA_CURRENT: + val = data[index] * 200; + break; + case PEM_DATA_TEMP: + val = data[index] * 1000; + break; + case PEM_DATA_TEMP_MAX: + val = 97 * 1000; /* 97 degrees C per datasheet */ + break; + case PEM_DATA_TEMP_CRIT: + val = 107 * 1000; /* 107 degrees C per datasheet */ + break; + default: + WARN_ON_ONCE(1); + val = 0; + } + return val; +} + +static long pem_get_input(u8 *data, int len, int index) +{ + long val; + + switch (index) { + case PEM_INPUT_VOLTAGE: + if (len == INPUT_STRING_LEN) + val = (data[index] + (data[index+1] << 8) - 75) * 1000; + else + val = (data[index] - 75) * 1000; + break; + case PEM_INPUT_POWER_LSB: + if (len == INPUT_STRING_LEN) + index++; + val = (data[index] + (data[index+1] << 8)) * 1000000L; + break; + default: + WARN_ON_ONCE(1); + val = 0; + } + return val; +} + +static long pem_get_fan(u8 *data, int len, int index) +{ + long val; + + switch (index) { + case PEM_FAN_FAN1: + case PEM_FAN_FAN2: + case PEM_FAN_FAN3: + val = data[index] * 100; + break; + default: + WARN_ON_ONCE(1); + val = 0; + } + return val; +} + +/* + * Show boolean, either a fault or an alarm. + * .nr points to the register, .index is the bit mask to check + */ +static ssize_t pem_show_bool(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da); + struct pem_data *data = pem_update_device(dev); + u8 status; + + if (IS_ERR(data)) + return PTR_ERR(data); + + status = data->data_string[attr->nr] & attr->index; + return snprintf(buf, PAGE_SIZE, "%d\n", !!status); +} + +static ssize_t pem_show_data(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct pem_data *data = pem_update_device(dev); + long value; + + if (IS_ERR(data)) + return PTR_ERR(data); + + value = pem_get_data(data->data_string, sizeof(data->data_string), + attr->index); + + return snprintf(buf, PAGE_SIZE, "%ld\n", value); +} + +static ssize_t pem_show_input(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct pem_data *data = pem_update_device(dev); + long value; + + if (IS_ERR(data)) + return PTR_ERR(data); + + value = pem_get_input(data->input_string, sizeof(data->input_string), + attr->index); + + return snprintf(buf, PAGE_SIZE, "%ld\n", value); +} + +static ssize_t pem_show_fan(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct pem_data *data = pem_update_device(dev); + long value; + + if (IS_ERR(data)) + return PTR_ERR(data); + + value = pem_get_fan(data->fan_speed, sizeof(data->fan_speed), + attr->index); + + return snprintf(buf, PAGE_SIZE, "%ld\n", value); +} + +/* Voltages */ +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, pem_show_data, NULL, + PEM_DATA_VOUT_LSB); +static SENSOR_DEVICE_ATTR_2(in1_min_alarm, S_IRUGO, pem_show_bool, NULL, + PEM_DATA_ALARM_2, ALRM2_OV_LOW); +static SENSOR_DEVICE_ATTR_2(in1_max_alarm, S_IRUGO, pem_show_bool, NULL, + PEM_DATA_ALARM_1, ALRM1_VOUT_OUT_LIMIT); +static SENSOR_DEVICE_ATTR_2(in1_crit_alarm, S_IRUGO, pem_show_bool, NULL, + PEM_DATA_ALARM_1, ALRM1_OV_VOLT_SHUTDOWN); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, pem_show_input, NULL, + PEM_INPUT_VOLTAGE); +static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, pem_show_bool, NULL, + PEM_DATA_ALARM_1, + ALRM1_VIN_OUT_LIMIT | ALRM1_PRIMARY_FAULT); + +/* Currents */ +static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, pem_show_data, NULL, + PEM_DATA_CURRENT); +static SENSOR_DEVICE_ATTR_2(curr1_alarm, S_IRUGO, pem_show_bool, NULL, + PEM_DATA_ALARM_1, ALRM1_VIN_OVERCURRENT); + +/* Power */ +static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, pem_show_input, NULL, + PEM_INPUT_POWER_LSB); +static SENSOR_DEVICE_ATTR_2(power1_alarm, S_IRUGO, pem_show_bool, NULL, + PEM_DATA_ALARM_1, ALRM1_POWER_LIMIT); + +/* Fans */ +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, pem_show_fan, NULL, + PEM_FAN_FAN1); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, pem_show_fan, NULL, + PEM_FAN_FAN2); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, pem_show_fan, NULL, + PEM_FAN_FAN3); +static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, pem_show_bool, NULL, + PEM_DATA_ALARM_2, ALRM2_FAN_FAULT); + +/* Temperatures */ +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, pem_show_data, NULL, + PEM_DATA_TEMP); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, pem_show_data, NULL, + PEM_DATA_TEMP_MAX); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, pem_show_data, NULL, + PEM_DATA_TEMP_CRIT); +static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, pem_show_bool, NULL, + PEM_DATA_ALARM_1, ALRM1_TEMP_WARNING); +static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, pem_show_bool, NULL, + PEM_DATA_ALARM_1, ALRM1_TEMP_SHUTDOWN); +static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, pem_show_bool, NULL, + PEM_DATA_ALARM_2, ALRM2_TEMP_FAULT); + +static struct attribute *pem_attributes[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min_alarm.dev_attr.attr, + &sensor_dev_attr_in1_max_alarm.dev_attr.attr, + &sensor_dev_attr_in1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + + &sensor_dev_attr_curr1_alarm.dev_attr.attr, + + &sensor_dev_attr_power1_alarm.dev_attr.attr, + + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + + NULL, +}; + +static const struct attribute_group pem_group = { + .attrs = pem_attributes, +}; + +static struct attribute *pem_input_attributes[] = { + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_power1_input.dev_attr.attr, +}; + +static const struct attribute_group pem_input_group = { + .attrs = pem_input_attributes, +}; + +static struct attribute *pem_fan_attributes[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, +}; + +static const struct attribute_group pem_fan_group = { + .attrs = pem_fan_attributes, +}; + +static int pem_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct pem_data *data; + int ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BLOCK_DATA + | I2C_FUNC_SMBUS_WRITE_BYTE)) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* + * We use the next two commands to determine if the device is really + * there. + */ + ret = pem_read_block(client, PEM_READ_FIRMWARE_REV, + data->firmware_rev, sizeof(data->firmware_rev)); + if (ret < 0) + goto out_kfree; + + ret = i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS); + if (ret < 0) + goto out_kfree; + + dev_info(&client->dev, "Firmware revision %d.%d.%d\n", + data->firmware_rev[0], data->firmware_rev[1], + data->firmware_rev[2]); + + /* Register sysfs hooks */ + ret = sysfs_create_group(&client->dev.kobj, &pem_group); + if (ret) + goto out_kfree; + + /* + * Check if input readings are supported. + * This is the case if we can read input data, + * and if the returned data is not all zeros. + * Note that input alarms are always supported. + */ + ret = pem_read_block(client, PEM_READ_INPUT_STRING, + data->input_string, + sizeof(data->input_string) - 1); + if (!ret && (data->input_string[0] || data->input_string[1] || + data->input_string[2])) + data->input_length = sizeof(data->input_string) - 1; + else if (ret < 0) { + /* Input string is one byte longer for some devices */ + ret = pem_read_block(client, PEM_READ_INPUT_STRING, + data->input_string, + sizeof(data->input_string)); + if (!ret && (data->input_string[0] || data->input_string[1] || + data->input_string[2] || data->input_string[3])) + data->input_length = sizeof(data->input_string); + } + ret = 0; + if (data->input_length) { + ret = sysfs_create_group(&client->dev.kobj, &pem_input_group); + if (ret) + goto out_remove_groups; + } + + /* + * Check if fan speed readings are supported. + * This is the case if we can read fan speed data, + * and if the returned data is not all zeros. + * Note that the fan alarm is always supported. + */ + ret = pem_read_block(client, PEM_READ_FAN_SPEED, + data->fan_speed, + sizeof(data->fan_speed)); + if (!ret && (data->fan_speed[0] || data->fan_speed[1] || + data->fan_speed[2] || data->fan_speed[3])) { + data->fans_supported = true; + ret = sysfs_create_group(&client->dev.kobj, &pem_fan_group); + if (ret) + goto out_remove_groups; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + goto out_remove_groups; + } + + return 0; + +out_remove_groups: + sysfs_remove_group(&client->dev.kobj, &pem_input_group); + sysfs_remove_group(&client->dev.kobj, &pem_fan_group); + sysfs_remove_group(&client->dev.kobj, &pem_group); +out_kfree: + kfree(data); + return ret; +} + +static int pem_remove(struct i2c_client *client) +{ + struct pem_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + + sysfs_remove_group(&client->dev.kobj, &pem_input_group); + sysfs_remove_group(&client->dev.kobj, &pem_fan_group); + sysfs_remove_group(&client->dev.kobj, &pem_group); + + kfree(data); + return 0; +} + +static const struct i2c_device_id pem_id[] = { + {"lineage_pem", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, pem_id); + +static struct i2c_driver pem_driver = { + .driver = { + .name = "lineage_pem", + }, + .probe = pem_probe, + .remove = pem_remove, + .id_table = pem_id, +}; + +static int __init pem_init(void) +{ + return i2c_add_driver(&pem_driver); +} + +static void __exit pem_exit(void) +{ + i2c_del_driver(&pem_driver); +} + +MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); +MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver"); +MODULE_LICENSE("GPL"); + +module_init(pem_init); +module_exit(pem_exit); |