diff options
author | Auke Kok <auke-jan.h.kok@intel.com> | 2008-06-27 18:00:18 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2008-07-04 12:46:59 (GMT) |
commit | 652fff321490fc3fcc8e8d302826a9c2379f03d2 (patch) | |
tree | 00e9675980cbee174305533dd3d0274715afa5e6 /drivers | |
parent | d67ce5338c7c71313f01e508d893bb8104ce459a (diff) | |
download | linux-652fff321490fc3fcc8e8d302826a9c2379f03d2.tar.xz |
igb: eliminate hw from the hw_dbg macro arguments
Various cosmetic cleanups. Comment fixes. Eliminate the hw part out
of the hw_dbg macro since it's always used.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/igb/e1000_82575.c | 115 | ||||
-rw-r--r-- | drivers/net/igb/e1000_82575.h | 6 | ||||
-rw-r--r-- | drivers/net/igb/e1000_defines.h | 27 | ||||
-rw-r--r-- | drivers/net/igb/e1000_hw.h | 8 | ||||
-rw-r--r-- | drivers/net/igb/e1000_mac.c | 75 | ||||
-rw-r--r-- | drivers/net/igb/e1000_nvm.c | 22 | ||||
-rw-r--r-- | drivers/net/igb/e1000_phy.c | 76 |
7 files changed, 147 insertions, 182 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index e6dd387..84ef695 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007 Intel Corporation. + Copyright(c) 2007 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -272,7 +272,7 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, u32 i, i2ccmd = 0; if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { - hw_dbg(hw, "PHY Address %u is out of range\n", offset); + hw_dbg("PHY Address %u is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -295,11 +295,11 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, break; } if (!(i2ccmd & E1000_I2CCMD_READY)) { - hw_dbg(hw, "I2CCMD Read did not complete\n"); + hw_dbg("I2CCMD Read did not complete\n"); return -E1000_ERR_PHY; } if (i2ccmd & E1000_I2CCMD_ERROR) { - hw_dbg(hw, "I2CCMD Error bit set\n"); + hw_dbg("I2CCMD Error bit set\n"); return -E1000_ERR_PHY; } @@ -326,7 +326,7 @@ static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, u16 phy_data_swapped; if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + hw_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -353,11 +353,11 @@ static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, break; } if (!(i2ccmd & E1000_I2CCMD_READY)) { - hw_dbg(hw, "I2CCMD Write did not complete\n"); + hw_dbg("I2CCMD Write did not complete\n"); return -E1000_ERR_PHY; } if (i2ccmd & E1000_I2CCMD_ERROR) { - hw_dbg(hw, "I2CCMD Error bit set\n"); + hw_dbg("I2CCMD Error bit set\n"); return -E1000_ERR_PHY; } @@ -368,7 +368,7 @@ static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, * igb_get_phy_id_82575 - Retrieve PHY addr and id * @hw: pointer to the HW structure * - * Retreives the PHY address and ID for both PHY's which do and do not use + * Retrieves the PHY address and ID for both PHY's which do and do not use * sgmi interface. **/ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) @@ -397,9 +397,8 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) for (phy->addr = 1; phy->addr < 8; phy->addr++) { ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id); if (ret_val == 0) { - hw_dbg(hw, "Vendor ID 0x%08X read at address %u\n", - phy_id, - phy->addr); + hw_dbg("Vendor ID 0x%08X read at address %u\n", + phy_id, phy->addr); /* * At the time of this writing, The M88 part is * the only supported SGMII PHY product. @@ -407,8 +406,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) if (phy_id == M88_VENDOR) break; } else { - hw_dbg(hw, "PHY address %u was unreadable\n", - phy->addr); + hw_dbg("PHY address %u was unreadable\n", phy->addr); } } @@ -440,7 +438,7 @@ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) * available to us at this time. */ - hw_dbg(hw, "Soft resetting SGMII attached PHY...\n"); + hw_dbg("Soft resetting SGMII attached PHY...\n"); /* * SFP documentation requires the following to configure the SPF module @@ -475,34 +473,29 @@ static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) s32 ret_val; u16 data; - ret_val = hw->phy.ops.read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, - &data); + ret_val = phy->ops.read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); if (ret_val) goto out; if (active) { data |= IGP02E1000_PM_D0_LPLU; - ret_val = hw->phy.ops.write_phy_reg(hw, - IGP02E1000_PHY_POWER_MGMT, - data); + ret_val = phy->ops.write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); if (ret_val) goto out; /* When LPLU is enabled, we should disable SmartSpeed */ - ret_val = hw->phy.ops.read_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + ret_val = phy->ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = hw->phy.ops.write_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + ret_val = phy->ops.write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) goto out; } else { data &= ~IGP02E1000_PM_D0_LPLU; - ret_val = hw->phy.ops.write_phy_reg(hw, - IGP02E1000_PHY_POWER_MGMT, - data); + ret_val = phy->ops.write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); /* * LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most @@ -510,29 +503,25 @@ static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) * SmartSpeed, so performance is maintained. */ if (phy->smart_speed == e1000_smart_speed_on) { - ret_val = hw->phy.ops.read_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + ret_val = phy->ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, &data); if (ret_val) goto out; data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = hw->phy.ops.write_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + ret_val = phy->ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) goto out; } else if (phy->smart_speed == e1000_smart_speed_off) { - ret_val = hw->phy.ops.read_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + ret_val = phy->ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, &data); if (ret_val) goto out; data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = hw->phy.ops.write_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + ret_val = phy->ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) goto out; } @@ -546,7 +535,7 @@ out: * igb_acquire_nvm_82575 - Request for access to EEPROM * @hw: pointer to the HW structure * - * Acquire the necessary semaphores for exclussive access to the EEPROM. + * Acquire the necessary semaphores for exclusive access to the EEPROM. * Set the EEPROM access request bit and wait for EEPROM access grant bit. * Return successful if access grant bit set, else clear the request for * EEPROM access and return -E1000_ERR_NVM (-1). @@ -617,7 +606,7 @@ static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) } if (i == timeout) { - hw_dbg(hw, "Can't access resource, SW_FW_SYNC timeout.\n"); + hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); ret_val = -E1000_ERR_SWFW_SYNC; goto out; } @@ -679,7 +668,7 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *hw) timeout--; } if (!timeout) - hw_dbg(hw, "MNG configuration cycle has not completed.\n"); + hw_dbg("MNG configuration cycle has not completed.\n"); /* If EEPROM is not marked present, init the PHY manually */ if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) && @@ -718,7 +707,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) * @speed: stores the current speed * @duplex: stores the current duplex * - * Using the physical coding sub-layer (PCS), retreive the current speed and + * Using the physical coding sub-layer (PCS), retrieve the current speed and * duplex, then store the values in the pointers provided. **/ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, @@ -802,9 +791,9 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) */ ret_val = igb_disable_pcie_master(hw); if (ret_val) - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + hw_dbg("PCI-E Master disable polling has failed.\n"); - hw_dbg(hw, "Masking off all interrupts\n"); + hw_dbg("Masking off all interrupts\n"); wr32(E1000_IMC, 0xffffffff); wr32(E1000_RCTL, 0); @@ -815,7 +804,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) ctrl = rd32(E1000_CTRL); - hw_dbg(hw, "Issuing a global reset to MAC\n"); + hw_dbg("Issuing a global reset to MAC\n"); wr32(E1000_CTRL, ctrl | E1000_CTRL_RST); ret_val = igb_get_auto_rd_done(hw); @@ -825,7 +814,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) * return with an error. This can happen in situations * where there is no eeprom and prevents getting link. */ - hw_dbg(hw, "Auto Read Done did not complete\n"); + hw_dbg("Auto Read Done did not complete\n"); } /* If EEPROM is not present, run manual init scripts */ @@ -856,18 +845,18 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = igb_id_led_init(hw); if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); + hw_dbg("Error initializing identification LED\n"); /* This is not fatal and we should not stop init due to this */ } /* Disabling VLAN filtering */ - hw_dbg(hw, "Initializing the IEEE VLAN\n"); + hw_dbg("Initializing the IEEE VLAN\n"); igb_clear_vfta(hw); /* Setup the receive address */ igb_init_rx_addrs(hw, rar_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + hw_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) array_wr32(E1000_MTA, i, 0); @@ -937,10 +926,10 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) * PHY will be set to 10H, 10F, 100H or 100F * depending on user settings. */ - hw_dbg(hw, "Forcing Speed and Duplex\n"); + hw_dbg("Forcing Speed and Duplex\n"); ret_val = igb_phy_force_speed_duplex(hw); if (ret_val) { - hw_dbg(hw, "Error Forcing Speed and Duplex\n"); + hw_dbg("Error Forcing Speed and Duplex\n"); goto out; } } @@ -953,20 +942,17 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) * Check link status. Wait up to 100 microseconds for link to become * valid. */ - ret_val = igb_phy_has_link(hw, - COPPER_LINK_UP_LIMIT, - 10, - &link); + ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link); if (ret_val) goto out; if (link) { - hw_dbg(hw, "Valid link established!!!\n"); + hw_dbg("Valid link established!!!\n"); /* Config the MAC and PHY after link is up */ igb_config_collision_dist(hw); ret_val = igb_config_fc_after_link_up(hw); } else { - hw_dbg(hw, "Unable to establish link!!!\n"); + hw_dbg("Unable to establish link!!!\n"); } out: @@ -1022,7 +1008,7 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ - hw_dbg(hw, "Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg); + hw_dbg("Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg); } else { /* Set PCS register for forced speed */ reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */ @@ -1030,7 +1016,7 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ E1000_PCS_LCTL_FSD | /* Force Speed */ E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ - hw_dbg(hw, "Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); + hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); } wr32(E1000_PCS_LCTL, reg); @@ -1071,7 +1057,7 @@ static s32 igb_configure_pcs_link_82575(struct e1000_hw *hw) */ reg |= E1000_PCS_LCTL_AN_RESTART | E1000_PCS_LCTL_AN_ENABLE; } else { - /* Set PCS regiseter for forced speed */ + /* Set PCS register for forced speed */ /* Turn off bits for full duplex, speed, and autoneg */ reg &= ~(E1000_PCS_LCTL_FSV_1000 | @@ -1092,8 +1078,7 @@ static s32 igb_configure_pcs_link_82575(struct e1000_hw *hw) E1000_PCS_LCTL_FORCE_LINK | E1000_PCS_LCTL_FLV_LINK_UP; - hw_dbg(hw, - "Wrote 0x%08X to PCS_LCTL to configure forced link\n", + hw_dbg("Wrote 0x%08X to PCS_LCTL to configure forced link\n", reg); } wr32(E1000_PCS_LCTL, reg); @@ -1138,7 +1123,7 @@ out: static s32 igb_reset_init_script_82575(struct e1000_hw *hw) { if (hw->mac.type == e1000_82575) { - hw_dbg(hw, "Running reset init script for 82575\n"); + hw_dbg("Running reset init script for 82575\n"); /* SerDes configuration via SERDESCTRL */ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C); igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78); diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h index 76ea846..5fb79dd 100644 --- a/drivers/net/igb/e1000_82575.h +++ b/drivers/net/igb/e1000_82575.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007 Intel Corporation. + Copyright(c) 2007 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -56,7 +56,7 @@ #define E1000_EIMS_RX_QUEUE E1000_EICR_RX_QUEUE #define E1000_EIMS_TX_QUEUE E1000_EICR_TX_QUEUE -/* Immediate Interrupt RX (A.K.A. Low Latency Interrupt) */ +/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */ /* Receive Descriptor - Advanced */ union e1000_adv_rx_desc { @@ -145,6 +145,6 @@ struct e1000_adv_tx_context_desc { -#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* TX Desc writeback RO bit */ +#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ #endif diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h index 8da9ffe..1006d53 100644 --- a/drivers/net/igb/e1000_defines.h +++ b/drivers/net/igb/e1000_defines.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007 Intel Corporation. + Copyright(c) 2007 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -91,12 +91,12 @@ #define E1000_MAX_SGMII_PHY_REG_ADDR 255 #define E1000_I2CCMD_PHY_TIMEOUT 200 -/* Receive Decriptor bit definitions */ +/* Receive Descriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ @@ -379,7 +379,7 @@ #define E1000_ICR_RXO 0x00000040 /* rx overrun */ #define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ #define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ -#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */ +#define E1000_ICR_RXCFG 0x00000400 /* Rx /c/ ordered set */ #define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ #define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ #define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ @@ -443,12 +443,6 @@ #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ -/* queue 0 Rx descriptor FIFO parity error */ -/* queue 0 Tx descriptor FIFO parity error */ -/* host arb read buffer parity error */ -/* packet buffer parity error */ -/* queue 1 Rx descriptor FIFO parity error */ -/* queue 1 Tx descriptor FIFO parity error */ /* Extended Interrupt Mask Set */ #define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ @@ -457,12 +451,6 @@ /* Interrupt Cause Set */ #define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ #define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ -/* queue 0 Rx descriptor FIFO parity error */ -/* queue 0 Tx descriptor FIFO parity error */ -/* host arb read buffer parity error */ -/* packet buffer parity error */ -/* queue 1 Rx descriptor FIFO parity error */ -/* queue 1 Tx descriptor FIFO parity error */ /* Extended Interrupt Cause Set */ @@ -567,7 +555,6 @@ /* 1000BASE-T Control Register */ #define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ #define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ - /* 0=DTE device */ #define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ /* 0=Configure PHY as Slave */ #define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ @@ -581,7 +568,7 @@ /* PHY 1000 MII Register/Bit Definitions */ /* PHY Registers defined by IEEE */ #define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Regiser */ +#define PHY_STATUS 0x01 /* Status Register */ #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ @@ -708,8 +695,8 @@ /* Auto crossover enabled all speeds */ #define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* - * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold - * 0=Normal 10BASE-T RX Threshold + * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold + * 0=Normal 10BASE-T Rx Threshold */ /* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */ #define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index 7b2c70a..746c3ea 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -586,14 +586,10 @@ struct e1000_hw { #ifdef DEBUG extern char *igb_get_hw_dev_name(struct e1000_hw *hw); -#define hw_dbg(hw, format, arg...) \ +#define hw_dbg(format, arg...) \ printk(KERN_DEBUG "%s: " format, igb_get_hw_dev_name(hw), ##arg) #else -static inline int __attribute__ ((format (printf, 2, 3))) -hw_dbg(struct e1000_hw *hw, const char *format, ...) -{ - return 0; -} +#define hw_dbg(format, arg...) #endif #endif diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 0dadcfd..47ad2c4 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -158,12 +158,12 @@ void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) u32 i; /* Setup the receive address */ - hw_dbg(hw, "Programming MAC Address into RAR[0]\n"); + hw_dbg("Programming MAC Address into RAR[0]\n"); hw->mac.ops.rar_set(hw, hw->mac.addr, 0); /* Zero out the other (rar_entry_count - 1) receive addresses */ - hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1); + hw_dbg("Clearing RAR[1-%u]\n", rar_count-1); for (i = 1; i < rar_count; i++) { array_wr32(E1000_RA, (i << 1), 0); wrfl(); @@ -193,7 +193,7 @@ s32 igb_check_alt_mac_addr(struct e1000_hw *hw) ret_val = hw->nvm.ops.read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, &nvm_alt_mac_addr_offset); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } @@ -209,7 +209,7 @@ s32 igb_check_alt_mac_addr(struct e1000_hw *hw) offset = nvm_alt_mac_addr_offset + (i >> 1); ret_val = hw->nvm.ops.read_nvm(hw, offset, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } @@ -336,7 +336,7 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, } /* Clear the old settings from the MTA */ - hw_dbg(hw, "Clearing MTA\n"); + hw_dbg("Clearing MTA\n"); for (i = 0; i < hw->mac.mta_reg_count; i++) { array_wr32(E1000_MTA, i, 0); wrfl(); @@ -345,7 +345,7 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, /* Load any remaining multicast addresses into the hash table. */ for (; mc_addr_count > 0; mc_addr_count--) { hash_value = igb_hash_mc_addr(hw, mc_addr_list); - hw_dbg(hw, "Hash value = 0x%03X\n", hash_value); + hw_dbg("Hash value = 0x%03X\n", hash_value); igb_mta_set(hw, hash_value); mc_addr_list += ETH_ALEN; } @@ -540,7 +540,7 @@ s32 igb_check_for_copper_link(struct e1000_hw *hw) */ ret_val = igb_config_fc_after_link_up(hw); if (ret_val) - hw_dbg(hw, "Error configuring flow control\n"); + hw_dbg("Error configuring flow control\n"); out: return ret_val; @@ -578,7 +578,7 @@ s32 igb_setup_link(struct e1000_hw *hw) */ hw->fc.original_type = hw->fc.type; - hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", hw->fc.type); + hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.type); /* Call the necessary media_type subroutine to configure the link. */ ret_val = hw->mac.ops.setup_physical_interface(hw); @@ -591,8 +591,7 @@ s32 igb_setup_link(struct e1000_hw *hw) * control is disabled, because it does not hurt anything to * initialize these registers. */ - hw_dbg(hw, - "Initializing the Flow Control address, type and timer regs\n"); + hw_dbg("Initializing the Flow Control address, type and timer regs\n"); wr32(E1000_FCT, FLOW_CONTROL_TYPE); wr32(E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH); wr32(E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW); @@ -689,7 +688,7 @@ static s32 igb_set_default_fc(struct e1000_hw *hw) &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } @@ -740,7 +739,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) * 3: Both Rx and TX flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ - hw_dbg(hw, "hw->fc.type = %u\n", hw->fc.type); + hw_dbg("hw->fc.type = %u\n", hw->fc.type); switch (hw->fc.type) { case e1000_fc_none: @@ -758,7 +757,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + hw_dbg("Flow control param set incorrectly\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -801,7 +800,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) } if (ret_val) { - hw_dbg(hw, "Error forcing flow control settings\n"); + hw_dbg("Error forcing flow control settings\n"); goto out; } @@ -827,7 +826,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) goto out; if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { - hw_dbg(hw, "Copper PHY and Auto Neg " + hw_dbg("Copper PHY and Auto Neg " "has not completed.\n"); goto out; } @@ -893,11 +892,11 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) */ if (hw->fc.original_type == e1000_fc_full) { hw->fc.type = e1000_fc_full; - hw_dbg(hw, "Flow Control = FULL.\r\n"); + hw_dbg("Flow Control = FULL.\r\n"); } else { hw->fc.type = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = " - "RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = " + "RX PAUSE frames only.\r\n"); } } /* @@ -913,7 +912,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.type = e1000_fc_tx_pause; - hw_dbg(hw, "Flow Control = TX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = TX PAUSE frames only.\r\n"); } /* * For transmitting PAUSE frames ONLY. @@ -928,7 +927,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.type = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); } /* * Per the IEEE spec, at this point flow control should be @@ -955,10 +954,10 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) hw->fc.original_type == e1000_fc_tx_pause) || hw->fc.strict_ieee) { hw->fc.type = e1000_fc_none; - hw_dbg(hw, "Flow Control = NONE.\r\n"); + hw_dbg("Flow Control = NONE.\r\n"); } else { hw->fc.type = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); } /* @@ -968,7 +967,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex); if (ret_val) { - hw_dbg(hw, "Error getting link speed and duplex\n"); + hw_dbg("Error getting link speed and duplex\n"); goto out; } @@ -981,7 +980,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = igb_force_mac_fc(hw); if (ret_val) { - hw_dbg(hw, "Error forcing flow control settings\n"); + hw_dbg("Error forcing flow control settings\n"); goto out; } } @@ -1007,21 +1006,21 @@ s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, status = rd32(E1000_STATUS); if (status & E1000_STATUS_SPEED_1000) { *speed = SPEED_1000; - hw_dbg(hw, "1000 Mbs, "); + hw_dbg("1000 Mbs, "); } else if (status & E1000_STATUS_SPEED_100) { *speed = SPEED_100; - hw_dbg(hw, "100 Mbs, "); + hw_dbg("100 Mbs, "); } else { *speed = SPEED_10; - hw_dbg(hw, "10 Mbs, "); + hw_dbg("10 Mbs, "); } if (status & E1000_STATUS_FD) { *duplex = FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + hw_dbg("Full Duplex\n"); } else { *duplex = HALF_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + hw_dbg("Half Duplex\n"); } return 0; @@ -1051,7 +1050,7 @@ s32 igb_get_hw_semaphore(struct e1000_hw *hw) } if (i == timeout) { - hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); + hw_dbg("Driver can't access device - SMBI bit is set.\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -1071,7 +1070,7 @@ s32 igb_get_hw_semaphore(struct e1000_hw *hw) if (i == timeout) { /* Release semaphores */ igb_put_hw_semaphore(hw); - hw_dbg(hw, "Driver can't access the NVM\n"); + hw_dbg("Driver can't access the NVM\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -1117,7 +1116,7 @@ s32 igb_get_auto_rd_done(struct e1000_hw *hw) } if (i == AUTO_READ_DONE_TIMEOUT) { - hw_dbg(hw, "Auto read by HW from NVM has not completed.\n"); + hw_dbg("Auto read by HW from NVM has not completed.\n"); ret_val = -E1000_ERR_RESET; goto out; } @@ -1140,7 +1139,7 @@ static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data) ret_val = hw->nvm.ops.read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } @@ -1322,7 +1321,7 @@ s32 igb_disable_pcie_master(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "Master requests are pending.\n"); + hw_dbg("Master requests are pending.\n"); ret_val = -E1000_ERR_MASTER_REQUESTS_PENDING; goto out; } @@ -1342,7 +1341,7 @@ void igb_reset_adaptive(struct e1000_hw *hw) struct e1000_mac_info *mac = &hw->mac; if (!mac->adaptive_ifs) { - hw_dbg(hw, "Not in Adaptive IFS mode!\n"); + hw_dbg("Not in Adaptive IFS mode!\n"); goto out; } @@ -1372,7 +1371,7 @@ void igb_update_adaptive(struct e1000_hw *hw) struct e1000_mac_info *mac = &hw->mac; if (!mac->adaptive_ifs) { - hw_dbg(hw, "Not in Adaptive IFS mode!\n"); + hw_dbg("Not in Adaptive IFS mode!\n"); goto out; } @@ -1413,7 +1412,7 @@ s32 igb_validate_mdi_setting(struct e1000_hw *hw) s32 ret_val = 0; if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) { - hw_dbg(hw, "Invalid MDI setting detected\n"); + hw_dbg("Invalid MDI setting detected\n"); hw->phy.mdix = 1; ret_val = -E1000_ERR_CONFIG; goto out; @@ -1452,7 +1451,7 @@ s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, break; } if (!(regvalue & E1000_GEN_CTL_READY)) { - hw_dbg(hw, "Reg %08x did not indicate ready\n", reg); + hw_dbg("Reg %08x did not indicate ready\n", reg); ret_val = -E1000_ERR_PHY; goto out; } diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c index 780ba79..a84e4e4 100644 --- a/drivers/net/igb/e1000_nvm.c +++ b/drivers/net/igb/e1000_nvm.c @@ -202,7 +202,7 @@ s32 igb_acquire_nvm(struct e1000_hw *hw) if (!timeout) { eecd &= ~E1000_EECD_REQ; wr32(E1000_EECD, eecd); - hw_dbg(hw, "Could not acquire NVM grant\n"); + hw_dbg("Could not acquire NVM grant\n"); ret_val = -E1000_ERR_NVM; } @@ -337,7 +337,7 @@ static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "SPI NVM Status error\n"); + hw_dbg("SPI NVM Status error\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -368,7 +368,7 @@ s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + hw_dbg("nvm parameter(s) out of bounds\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -414,7 +414,7 @@ s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + hw_dbg("nvm parameter(s) out of bounds\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -489,14 +489,14 @@ s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num) ret_val = hw->nvm.ops.read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } *part_num = (u32)(nvm_data << 16); ret_val = hw->nvm.ops.read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } *part_num |= nvm_data; @@ -522,7 +522,7 @@ s32 igb_read_mac_addr(struct e1000_hw *hw) offset = i >> 1; ret_val = hw->nvm.ops.read_nvm(hw, offset, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF); @@ -556,14 +556,14 @@ s32 igb_validate_nvm_checksum(struct e1000_hw *hw) for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { ret_val = hw->nvm.ops.read_nvm(hw, i, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } checksum += nvm_data; } if (checksum != (u16) NVM_SUM) { - hw_dbg(hw, "NVM Checksum Invalid\n"); + hw_dbg("NVM Checksum Invalid\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -589,7 +589,7 @@ s32 igb_update_nvm_checksum(struct e1000_hw *hw) for (i = 0; i < NVM_CHECKSUM_REG; i++) { ret_val = hw->nvm.ops.read_nvm(hw, i, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error while updating checksum.\n"); + hw_dbg("NVM Read Error while updating checksum.\n"); goto out; } checksum += nvm_data; @@ -597,7 +597,7 @@ s32 igb_update_nvm_checksum(struct e1000_hw *hw) checksum = (u16) NVM_SUM - checksum; ret_val = hw->nvm.ops.write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum); if (ret_val) - hw_dbg(hw, "NVM Write Error while updating checksum.\n"); + hw_dbg("NVM Write Error while updating checksum.\n"); out: return ret_val; diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index 220e471..17fddb9 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -144,7 +144,7 @@ static s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) s32 ret_val = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + hw_dbg("PHY Address %d is out of range\n", offset); ret_val = -E1000_ERR_PARAM; goto out; } @@ -172,12 +172,12 @@ static s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Read did not complete\n"); + hw_dbg("MDI Read did not complete\n"); ret_val = -E1000_ERR_PHY; goto out; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + hw_dbg("MDI Error\n"); ret_val = -E1000_ERR_PHY; goto out; } @@ -202,7 +202,7 @@ static s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) s32 ret_val = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + hw_dbg("PHY Address %d is out of range\n", offset); ret_val = -E1000_ERR_PARAM; goto out; } @@ -231,12 +231,12 @@ static s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Write did not complete\n"); + hw_dbg("MDI Write did not complete\n"); ret_val = -E1000_ERR_PHY; goto out; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + hw_dbg("MDI Error\n"); ret_val = -E1000_ERR_PHY; goto out; } @@ -423,7 +423,7 @@ s32 igb_copper_link_setup_m88(struct e1000_hw *hw) /* Commit the changes. */ ret_val = igb_phy_sw_reset(hw); if (ret_val) { - hw_dbg(hw, "Error committing the PHY changes\n"); + hw_dbg("Error committing the PHY changes\n"); goto out; } @@ -451,7 +451,7 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw) ret_val = hw->phy.ops.reset_phy(hw); if (ret_val) { - hw_dbg(hw, "Error resetting the PHY.\n"); + hw_dbg("Error resetting the PHY.\n"); goto out; } @@ -467,7 +467,7 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw) if (hw->phy.ops.set_d3_lplu_state) ret_val = hw->phy.ops.set_d3_lplu_state(hw, false); if (ret_val) { - hw_dbg(hw, "Error Disabling LPLU D3\n"); + hw_dbg("Error Disabling LPLU D3\n"); goto out; } } @@ -475,7 +475,7 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw) /* disable lplu d0 during driver init */ ret_val = hw->phy.ops.set_d0_lplu_state(hw, false); if (ret_val) { - hw_dbg(hw, "Error Disabling LPLU D0\n"); + hw_dbg("Error Disabling LPLU D0\n"); goto out; } /* Configure mdi-mdix settings */ @@ -597,13 +597,13 @@ s32 igb_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_advertised == 0) phy->autoneg_advertised = phy->autoneg_mask; - hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n"); + hw_dbg("Reconfiguring auto-neg advertisement params\n"); ret_val = igb_phy_setup_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error Setting up Auto-Negotiation\n"); + hw_dbg("Error Setting up Auto-Negotiation\n"); goto out; } - hw_dbg(hw, "Restarting Auto-Neg\n"); + hw_dbg("Restarting Auto-Neg\n"); /* * Restart auto-negotiation by setting the Auto Neg Enable bit and @@ -625,8 +625,8 @@ s32 igb_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { ret_val = igb_wait_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error while waiting for " - "autoneg to complete\n"); + hw_dbg("Error while waiting for " + "autoneg to complete\n"); goto out; } } @@ -689,39 +689,39 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) NWAY_AR_10T_HD_CAPS); mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); - hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised); + hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); /* Do we want to advertise 10 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_HALF) { - hw_dbg(hw, "Advertise 10mb Half duplex\n"); + hw_dbg("Advertise 10mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; } /* Do we want to advertise 10 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_FULL) { - hw_dbg(hw, "Advertise 10mb Full duplex\n"); + hw_dbg("Advertise 10mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; } /* Do we want to advertise 100 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_HALF) { - hw_dbg(hw, "Advertise 100mb Half duplex\n"); + hw_dbg("Advertise 100mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; } /* Do we want to advertise 100 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_FULL) { - hw_dbg(hw, "Advertise 100mb Full duplex\n"); + hw_dbg("Advertise 100mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; } /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ if (phy->autoneg_advertised & ADVERTISE_1000_HALF) - hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n"); + hw_dbg("Advertise 1000mb Half duplex request denied!\n"); /* Do we want to advertise 1000 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { - hw_dbg(hw, "Advertise 1000mb Full duplex\n"); + hw_dbg("Advertise 1000mb Full duplex\n"); mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; } @@ -780,7 +780,7 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + hw_dbg("Flow control param set incorrectly\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -790,7 +790,7 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) if (ret_val) goto out; - hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); if (phy->autoneg_mask & ADVERTISE_1000_FULL) { ret_val = hw->phy.ops.write_phy_reg(hw, @@ -846,13 +846,12 @@ s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw) if (ret_val) goto out; - hw_dbg(hw, "IGP PSCR: %X\n", phy_data); + hw_dbg("IGP PSCR: %X\n", phy_data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, - "Waiting for forced speed/duplex link on IGP phy.\n"); + hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n"); ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, @@ -862,7 +861,7 @@ s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw) goto out; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + hw_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = igb_phy_has_link(hw, @@ -909,7 +908,7 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (ret_val) goto out; - hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data); + hw_dbg("M88E1000 PSCR: %X\n", phy_data); ret_val = hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_data); if (ret_val) @@ -927,8 +926,7 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, - "Waiting for forced speed/duplex link on M88 phy.\n"); + hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, @@ -1028,11 +1026,11 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { ctrl &= ~E1000_CTRL_FD; *phy_ctrl &= ~MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + hw_dbg("Half Duplex\n"); } else { ctrl |= E1000_CTRL_FD; *phy_ctrl |= MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + hw_dbg("Full Duplex\n"); } /* Forcing 10mb or 100mb? */ @@ -1040,12 +1038,12 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, ctrl |= E1000_CTRL_SPD_100; *phy_ctrl |= MII_CR_SPEED_100; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); - hw_dbg(hw, "Forcing 100mb\n"); + hw_dbg("Forcing 100mb\n"); } else { ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); *phy_ctrl |= MII_CR_SPEED_10; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); - hw_dbg(hw, "Forcing 10mb\n"); + hw_dbg("Forcing 10mb\n"); } igb_config_collision_dist(hw); @@ -1459,7 +1457,7 @@ s32 igb_get_phy_info_m88(struct e1000_hw *hw) bool link; if (hw->phy.media_type != e1000_media_type_copper) { - hw_dbg(hw, "Phy info is only valid for copper media\n"); + hw_dbg("Phy info is only valid for copper media\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -1469,7 +1467,7 @@ s32 igb_get_phy_info_m88(struct e1000_hw *hw) goto out; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + hw_dbg("Phy info is only valid if link is up\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -1543,7 +1541,7 @@ s32 igb_get_phy_info_igp(struct e1000_hw *hw) goto out; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + hw_dbg("Phy info is only valid if link is up\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -1728,7 +1726,7 @@ s32 igb_phy_force_speed_duplex(struct e1000_hw *hw) **/ s32 igb_phy_init_script_igp3(struct e1000_hw *hw) { - hw_dbg(hw, "Running IGP 3 PHY init script\n"); + hw_dbg("Running IGP 3 PHY init script\n"); /* PHY init IGP 3 */ /* Enable rise/fall, 10-mode work in class-A */ |