net: remove ixp2000 ethernet driver

The platform is removed, so there are no users of this driver.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
Cc: Don Skidmore <donald.c.skidmore@intel.com>
Cc: Greg Rose <gregory.v.rose@intel.com>
Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Cc: Alex Duyck <alexander.h.duyck@intel.com>
Cc: John Ronciak <john.ronciak@intel.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

19 files changed, 3 insertions, 2543 deletions

diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 90142aa..74215c0 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_INTEL
 	default y
 	depends on PCI || PCI_MSI || ISA || ISA_DMA_API || ARM || \
 		   ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
-		   GSC || BVME6000 || MVME16x || ARCH_ENP2611 || \
+		   GSC || BVME6000 || MVME16x || \
 		   (ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR) || \
 		   EXPERIMENTAL
 	---help---
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index cf67352..3f43101 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -5,8 +5,8 @@
 config NET_VENDOR_XSCALE
 	bool "Intel XScale IXP devices"
 	default y
-	depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \
-		   IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611)
+	depends on NET_VENDOR_INTEL && (ARM && ARCH_IXP4XX && \
+		   IXP4XX_NPE && IXP4XX_QMGR)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -27,6 +27,4 @@ config IXP4XX_ETH
 	  Say Y here if you want to use built-in Ethernet ports
 	  on IXP4xx processor.
 
-source "drivers/net/ethernet/xscale/ixp2000/Kconfig"
-
 endif # NET_VENDOR_XSCALE
diff --git a/drivers/net/ethernet/xscale/Makefile b/drivers/net/ethernet/xscale/Makefile
index b195b9d..abc3b03 100644
--- a/drivers/net/ethernet/xscale/Makefile
+++ b/drivers/net/ethernet/xscale/Makefile
@@ -2,5 +2,4 @@
 # Makefile for the Intel XScale IXP device drivers.
 #
 
-obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
 obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
diff --git a/drivers/net/ethernet/xscale/ixp2000/Kconfig b/drivers/net/ethernet/xscale/ixp2000/Kconfig
deleted file mode 100644
index 58dbc5b..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-config ENP2611_MSF_NET
-	tristate "Radisys ENP2611 MSF network interface support"
-	depends on ARCH_ENP2611
-	---help---
-	  This is a driver for the MSF network interface unit in
-	  the IXP2400 on the Radisys ENP2611 platform.
diff --git a/drivers/net/ethernet/xscale/ixp2000/Makefile b/drivers/net/ethernet/xscale/ixp2000/Makefile
deleted file mode 100644
index fd38351..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_ENP2611_MSF_NET) += enp2611_mod.o
-
-enp2611_mod-objs := caleb.o enp2611.o ixp2400-msf.o ixpdev.o pm3386.o
diff --git a/drivers/net/ethernet/xscale/ixp2000/caleb.c b/drivers/net/ethernet/xscale/ixp2000/caleb.c
deleted file mode 100644
index 7dea5b9..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/caleb.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include "caleb.h"
-
-#define CALEB_IDLO		0x00
-#define CALEB_IDHI		0x01
-#define CALEB_RID		0x02
-#define CALEB_RESET		0x03
-#define CALEB_INTREN0		0x04
-#define CALEB_INTREN1		0x05
-#define CALEB_INTRSTAT0		0x06
-#define CALEB_INTRSTAT1		0x07
-#define CALEB_PORTEN		0x08
-#define CALEB_BURST		0x09
-#define CALEB_PORTPAUS		0x0A
-#define CALEB_PORTPAUSD		0x0B
-#define CALEB_PHY0RX		0x10
-#define CALEB_PHY1RX		0x11
-#define CALEB_PHY0TX		0x12
-#define CALEB_PHY1TX		0x13
-#define CALEB_IXPRX_HI_CNTR	0x15
-#define CALEB_PHY0RX_HI_CNTR	0x16
-#define CALEB_PHY1RX_HI_CNTR	0x17
-#define CALEB_IXPRX_CNTR	0x18
-#define CALEB_PHY0RX_CNTR	0x19
-#define CALEB_PHY1RX_CNTR	0x1A
-#define CALEB_IXPTX_CNTR	0x1B
-#define CALEB_PHY0TX_CNTR	0x1C
-#define CALEB_PHY1TX_CNTR	0x1D
-#define CALEB_DEBUG0		0x1E
-#define CALEB_DEBUG1		0x1F
-
-
-static u8 caleb_reg_read(int reg)
-{
-	u8 value;
-
-	value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg));
-
-//	printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value);
-
-	return value;
-}
-
-static void caleb_reg_write(int reg, u8 value)
-{
-	u8 dummy;
-
-//	printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value);
-
-	*((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value;
-
-	dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE);
-	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-
-void caleb_reset(void)
-{
-	/*
-	 * Perform a chip reset.
-	 */
-	caleb_reg_write(CALEB_RESET, 0x02);
-	udelay(1);
-
-	/*
-	 * Enable all interrupt sources.  This is needed to get
-	 * meaningful results out of the status bits (register 6
-	 * and 7.)
-	 */
-	caleb_reg_write(CALEB_INTREN0, 0xff);
-	caleb_reg_write(CALEB_INTREN1, 0x07);
-
-	/*
-	 * Set RX and TX FIFO thresholds to 1.5kb.
-	 */
-	caleb_reg_write(CALEB_PHY0RX, 0x11);
-	caleb_reg_write(CALEB_PHY1RX, 0x11);
-	caleb_reg_write(CALEB_PHY0TX, 0x11);
-	caleb_reg_write(CALEB_PHY1TX, 0x11);
-
-	/*
-	 * Program SPI-3 burst size.
-	 */
-	caleb_reg_write(CALEB_BURST, 0);	// 64-byte RBUF mpackets
-//	caleb_reg_write(CALEB_BURST, 1);	// 128-byte RBUF mpackets
-//	caleb_reg_write(CALEB_BURST, 2);	// 256-byte RBUF mpackets
-}
-
-void caleb_enable_rx(int port)
-{
-	u8 temp;
-
-	temp = caleb_reg_read(CALEB_PORTEN);
-	temp |= 1 << port;
-	caleb_reg_write(CALEB_PORTEN, temp);
-}
-
-void caleb_disable_rx(int port)
-{
-	u8 temp;
-
-	temp = caleb_reg_read(CALEB_PORTEN);
-	temp &= ~(1 << port);
-	caleb_reg_write(CALEB_PORTEN, temp);
-}
-
-void caleb_enable_tx(int port)
-{
-	u8 temp;
-
-	temp = caleb_reg_read(CALEB_PORTEN);
-	temp |= 1 << (port + 4);
-	caleb_reg_write(CALEB_PORTEN, temp);
-}
-
-void caleb_disable_tx(int port)
-{
-	u8 temp;
-
-	temp = caleb_reg_read(CALEB_PORTEN);
-	temp &= ~(1 << (port + 4));
-	caleb_reg_write(CALEB_PORTEN, temp);
-}
diff --git a/drivers/net/ethernet/xscale/ixp2000/caleb.h b/drivers/net/ethernet/xscale/ixp2000/caleb.h
deleted file mode 100644
index e93a1ef..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/caleb.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __CALEB_H
-#define __CALEB_H
-
-void caleb_reset(void);
-void caleb_enable_rx(int port);
-void caleb_disable_rx(int port);
-void caleb_enable_tx(int port);
-void caleb_disable_tx(int port);
-
-
-#endif
diff --git a/drivers/net/ethernet/xscale/ixp2000/enp2611.c b/drivers/net/ethernet/xscale/ixp2000/enp2611.c
deleted file mode 100644
index 34a6cfd..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/enp2611.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * IXP2400 MSF network device driver for the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/moduleparam.h>
-#include <asm/hardware/uengine.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-#include "ixpdev.h"
-#include "caleb.h"
-#include "ixp2400-msf.h"
-#include "pm3386.h"
-
-/***********************************************************************
- * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC
- * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA
- * to the IXP2400.
- *
- *                +-------------+
- * SFP GBIC #0 ---+             |       +---------+
- *                |  PM3386 #0  +-------+         |
- * SFP GBIC #1 ---+             |       | "Caleb" |         +---------+
- *                +-------------+       |         |         |         |
- *                                      | SPI-3   +---------+ IXP2400 |
- *                +-------------+       | bridge  |         |         |
- * SFP GBIC #2 ---+             |       | FPGA    |         +---------+
- *                |  PM3386 #1  +-------+         |
- *                |             |       +---------+
- *                +-------------+
- *              ^                   ^                  ^
- *              | 1.25Gbaud         | 104MHz           | 104MHz
- *              | SERDES ea.        | SPI-3 ea.        | SPI-3
- *
- ***********************************************************************/
-static struct ixp2400_msf_parameters enp2611_msf_parameters =
-{
-	.rx_mode =		IXP2400_RX_MODE_UTOPIA_POS |
-				IXP2400_RX_MODE_1x32 |
-				IXP2400_RX_MODE_MPHY |
-				IXP2400_RX_MODE_MPHY_32 |
-				IXP2400_RX_MODE_MPHY_POLLED_STATUS |
-				IXP2400_RX_MODE_MPHY_LEVEL3 |
-				IXP2400_RX_MODE_RBUF_SIZE_64,
-
-	.rxclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16,
-
-	.rx_poll_ports =	3,
-
-	.rx_channel_mode = {
-		IXP2400_PORT_RX_MODE_MASTER |
-		IXP2400_PORT_RX_MODE_POS_PHY |
-		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
-		IXP2400_PORT_RX_MODE_ODD_PARITY |
-		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_RX_MODE_MASTER |
-		IXP2400_PORT_RX_MODE_POS_PHY |
-		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
-		IXP2400_PORT_RX_MODE_ODD_PARITY |
-		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_RX_MODE_MASTER |
-		IXP2400_PORT_RX_MODE_POS_PHY |
-		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
-		IXP2400_PORT_RX_MODE_ODD_PARITY |
-		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_RX_MODE_MASTER |
-		IXP2400_PORT_RX_MODE_POS_PHY |
-		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
-		IXP2400_PORT_RX_MODE_ODD_PARITY |
-		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE
-	},
-
-	.tx_mode =		IXP2400_TX_MODE_UTOPIA_POS |
-				IXP2400_TX_MODE_1x32 |
-				IXP2400_TX_MODE_MPHY |
-				IXP2400_TX_MODE_MPHY_32 |
-				IXP2400_TX_MODE_MPHY_POLLED_STATUS |
-				IXP2400_TX_MODE_MPHY_LEVEL3 |
-				IXP2400_TX_MODE_TBUF_SIZE_64,
-
-	.txclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16,
-
-	.tx_poll_ports =	3,
-
-	.tx_channel_mode = {
-		IXP2400_PORT_TX_MODE_MASTER |
-		IXP2400_PORT_TX_MODE_POS_PHY |
-		IXP2400_PORT_TX_MODE_ODD_PARITY |
-		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_TX_MODE_MASTER |
-		IXP2400_PORT_TX_MODE_POS_PHY |
-		IXP2400_PORT_TX_MODE_ODD_PARITY |
-		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_TX_MODE_MASTER |
-		IXP2400_PORT_TX_MODE_POS_PHY |
-		IXP2400_PORT_TX_MODE_ODD_PARITY |
-		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
-
-		IXP2400_PORT_TX_MODE_MASTER |
-		IXP2400_PORT_TX_MODE_POS_PHY |
-		IXP2400_PORT_TX_MODE_ODD_PARITY |
-		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE
-	}
-};
-
-static struct net_device *nds[3];
-static struct timer_list link_check_timer;
-
-/* @@@ Poll the SFP moddef0 line too.  */
-/* @@@ Try to use the pm3386 DOOL interrupt as well.  */
-static void enp2611_check_link_status(unsigned long __dummy)
-{
-	int i;
-
-	for (i = 0; i < 3; i++) {
-		struct net_device *dev;
-		int status;
-
-		dev = nds[i];
-		if (dev == NULL)
-			continue;
-
-		status = pm3386_is_link_up(i);
-		if (status && !netif_carrier_ok(dev)) {
-			/* @@@ Should report autonegotiation status.  */
-			printk(KERN_INFO "%s: NIC Link is Up\n", dev->name);
-
-			pm3386_enable_tx(i);
-			caleb_enable_tx(i);
-			netif_carrier_on(dev);
-		} else if (!status && netif_carrier_ok(dev)) {
-			printk(KERN_INFO "%s: NIC Link is Down\n", dev->name);
-
-			netif_carrier_off(dev);
-			caleb_disable_tx(i);
-			pm3386_disable_tx(i);
-		}
-	}
-
-	link_check_timer.expires = jiffies + HZ / 10;
-	add_timer(&link_check_timer);
-}
-
-static void enp2611_set_port_admin_status(int port, int up)
-{
-	if (up) {
-		caleb_enable_rx(port);
-
-		pm3386_set_carrier(port, 1);
-		pm3386_enable_rx(port);
-	} else {
-		caleb_disable_tx(port);
-		pm3386_disable_tx(port);
-		/* @@@ Flush out pending packets.  */
-		pm3386_set_carrier(port, 0);
-
-		pm3386_disable_rx(port);
-		caleb_disable_rx(port);
-	}
-}
-
-static int __init enp2611_init_module(void)
-{ 
-	int ports;
-	int i;
-
-	if (!machine_is_enp2611())
-		return -ENODEV;
-
-	caleb_reset();
-	pm3386_reset();
-
-	ports = pm3386_port_count();
-	for (i = 0; i < ports; i++) {
-		nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv));
-		if (nds[i] == NULL) {
-			while (--i >= 0)
-				free_netdev(nds[i]);
-			return -ENOMEM;
-		}
-
-		pm3386_init_port(i);
-		pm3386_get_mac(i, nds[i]->dev_addr);
-	}
-
-	ixp2400_msf_init(&enp2611_msf_parameters);
-
-	if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
-		for (i = 0; i < ports; i++)
-			if (nds[i])
-				free_netdev(nds[i]);
-		return -EINVAL;
-	}
-
-	init_timer(&link_check_timer);
-	link_check_timer.function = enp2611_check_link_status;
-	link_check_timer.expires = jiffies;
-	add_timer(&link_check_timer);
-
-	return 0;
-}
-
-static void __exit enp2611_cleanup_module(void)
-{
-	int i;
-
-	del_timer_sync(&link_check_timer);
-
-	ixpdev_deinit();
-	for (i = 0; i < 3; i++)
-		free_netdev(nds[i]);
-}
-
-module_init(enp2611_init_module);
-module_exit(enp2611_cleanup_module);
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c
deleted file mode 100644
index f5ffd7e..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Generic library functions for the MSF (Media and Switch Fabric) unit
- * found on the Intel IXP2400 network processor.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/ixp2000-regs.h>
-#include <asm/delay.h>
-#include <asm/io.h>
-#include "ixp2400-msf.h"
-
-/*
- * This is the Intel recommended PLL init procedure as described on
- * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual.
- */
-static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp)
-{
-	int rx_dual_clock;
-	int tx_dual_clock;
-	u32 value;
-
-	/*
-	 * If the RX mode is not 1x32, we have to enable both RX PLLs
-	 * (#0 and #1.)  The same thing for the TX direction.
-	 */
-	rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK);
-	tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK);
-
-	/*
-	 * Read initial value.
-	 */
-	value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL);
-
-	/*
-	 * Put PLLs in powerdown and bypass mode.
-	 */
-	value |= 0x0000f0f0;
-	ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
-	/*
-	 * Set single or dual clock mode bits.
-	 */
-	value &= ~0x03000000;
-	value |= (rx_dual_clock << 24) | (tx_dual_clock << 25);
-
-	/*
-	 * Set multipliers.
-	 */
-	value &= ~0x00ff0000;
-	value |= mp->rxclk01_multiplier << 16;
-	value |= mp->rxclk23_multiplier << 18;
-	value |= mp->txclk01_multiplier << 20;
-	value |= mp->txclk23_multiplier << 22;
-
-	/*
-	 * And write value.
-	 */
-	ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
-	/*
-	 * Disable PLL bypass mode.
-	 */
-	value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15);
-	ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
-	/*
-	 * Turn on PLLs.
-	 */
-	value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7);
-	ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
-	/*
-	 * Wait for PLLs to lock.  There are lock status bits, but IXP2400
-	 * erratum #65 says that these lock bits should not be relied upon
-	 * as they might not accurately reflect the true state of the PLLs.
-	 */
-	udelay(100);
-}
-
-/*
- * Needed according to p480 of Programmer's Reference Manual.
- */
-static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp)
-{
-	int size_bits;
-	int i;
-
-	/*
-	 * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer
-	 * corruption) in the Intel-recommended way: do not add the RBUF
-	 * elements susceptible to corruption to the freelist.
-	 */
-	size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK;
-	if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) {
-		for (i = 1; i < 128; i++) {
-			if (i == 9 || i == 18 || i == 27)
-				continue;
-			ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
-		}
-	} else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) {
-		for (i = 1; i < 64; i++) {
-			if (i == 4 || i == 9 || i == 13)
-				continue;
-			ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
-		}
-	} else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) {
-		for (i = 1; i < 32; i++) {
-			if (i == 2 || i == 4 || i == 6)
-				continue;
-			ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
-		}
-	}
-}
-
-static u32 ixp2400_msf_valid_channels(u32 reg)
-{
-	u32 channels;
-
-	channels = 0;
-	switch (reg & IXP2400_RX_MODE_WIDTH_MASK) {
-	case IXP2400_RX_MODE_1x32:
-		channels = 0x1;
-		if (reg & IXP2400_RX_MODE_MPHY &&
-		    !(reg & IXP2400_RX_MODE_MPHY_32))
-			channels = 0xf;
-		break;
-
-	case IXP2400_RX_MODE_2x16:
-		channels = 0x5;
-		break;
-
-	case IXP2400_RX_MODE_4x8:
-		channels = 0xf;
-		break;
-
-	case IXP2400_RX_MODE_1x16_2x8:
-		channels = 0xd;
-		break;
-	}
-
-	return channels;
-}
-
-static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp)
-{
-	u32 value;
-
-	value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff;
-	value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28;
-	ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value);
-}
-
-static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp)
-{
-	u32 value;
-
-	value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff;
-	value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28;
-	ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value);
-}
-
-
-void ixp2400_msf_init(struct ixp2400_msf_parameters *mp)
-{
-	u32 value;
-	int i;
-
-	/*
-	 * Init the RX/TX PLLs based on the passed parameter block.
-	 */
-	ixp2400_pll_init(mp);
-
-	/*
-	 * Reset MSF.  Bit 7 in IXP_RESET_0 resets the MSF.
-	 */
-	value = ixp2000_reg_read(IXP2000_RESET0);
-	ixp2000_reg_write(IXP2000_RESET0, value | 0x80);
-	ixp2000_reg_write(IXP2000_RESET0, value & ~0x80);
-
-	/*
-	 * Initialise the RX section.
-	 */
-	ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1);
-	ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode);
-	for (i = 0; i < 4; i++) {
-		ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i,
-						mp->rx_channel_mode[i]);
-	}
-	ixp2400_msf_free_rbuf_entries(mp);
-	ixp2400_msf_enable_rx(mp);
-
-	/*
-	 * Initialise the TX section.
-	 */
-	ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1);
-	ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode);
-	for (i = 0; i < 4; i++) {
-		ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i,
-						mp->tx_channel_mode[i]);
-	}
-	ixp2400_msf_enable_tx(mp);
-}
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h
deleted file mode 100644
index 3ac1af2..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Generic library functions for the MSF (Media and Switch Fabric) unit
- * found on the Intel IXP2400 network processor.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#ifndef __IXP2400_MSF_H
-#define __IXP2400_MSF_H
-
-struct ixp2400_msf_parameters
-{
-	u32				rx_mode;
-	unsigned			rxclk01_multiplier:2;
-	unsigned			rxclk23_multiplier:2;
-	unsigned			rx_poll_ports:6;
-	u32				rx_channel_mode[4];
-
-	u32				tx_mode;
-	unsigned			txclk01_multiplier:2;
-	unsigned			txclk23_multiplier:2;
-	unsigned			tx_poll_ports:6;
-	u32				tx_channel_mode[4];
-};
-
-void ixp2400_msf_init(struct ixp2400_msf_parameters *mp);
-
-#define IXP2400_PLL_MULTIPLIER_48		0x00
-#define IXP2400_PLL_MULTIPLIER_24		0x01
-#define IXP2400_PLL_MULTIPLIER_16		0x02
-#define IXP2400_PLL_MULTIPLIER_12		0x03
-
-#define IXP2400_RX_MODE_CSIX			0x00400000
-#define IXP2400_RX_MODE_UTOPIA_POS		0x00000000
-#define IXP2400_RX_MODE_WIDTH_MASK		0x00300000
-#define IXP2400_RX_MODE_1x16_2x8		0x00300000
-#define IXP2400_RX_MODE_4x8			0x00200000
-#define IXP2400_RX_MODE_2x16			0x00100000
-#define IXP2400_RX_MODE_1x32			0x00000000
-#define IXP2400_RX_MODE_MPHY			0x00080000
-#define IXP2400_RX_MODE_SPHY			0x00000000
-#define IXP2400_RX_MODE_MPHY_32			0x00040000
-#define IXP2400_RX_MODE_MPHY_4			0x00000000
-#define IXP2400_RX_MODE_MPHY_POLLED_STATUS	0x00020000
-#define IXP2400_RX_MODE_MPHY_DIRECT_STATUS	0x00000000
-#define IXP2400_RX_MODE_CBUS_FULL_DUPLEX	0x00010000
-#define IXP2400_RX_MODE_CBUS_SIMPLEX		0x00000000
-#define IXP2400_RX_MODE_MPHY_LEVEL2		0x00004000
-#define IXP2400_RX_MODE_MPHY_LEVEL3		0x00000000
-#define IXP2400_RX_MODE_CBUS_8BIT		0x00002000
-#define IXP2400_RX_MODE_CBUS_4BIT		0x00000000
-#define IXP2400_RX_MODE_CSIX_SINGLE_FREELIST	0x00000200
-#define IXP2400_RX_MODE_CSIX_SPLIT_FREELISTS	0x00000000
-#define IXP2400_RX_MODE_RBUF_SIZE_MASK		0x0000000c
-#define IXP2400_RX_MODE_RBUF_SIZE_256		0x00000008
-#define IXP2400_RX_MODE_RBUF_SIZE_128		0x00000004
-#define IXP2400_RX_MODE_RBUF_SIZE_64		0x00000000
-
-#define IXP2400_PORT_RX_MODE_SLAVE		0x00000040
-#define IXP2400_PORT_RX_MODE_MASTER		0x00000000
-#define IXP2400_PORT_RX_MODE_POS_PHY_L3		0x00000020
-#define IXP2400_PORT_RX_MODE_POS_PHY_L2		0x00000000
-#define IXP2400_PORT_RX_MODE_POS_PHY		0x00000010
-#define IXP2400_PORT_RX_MODE_UTOPIA		0x00000000
-#define IXP2400_PORT_RX_MODE_EVEN_PARITY	0x0000000c
-#define IXP2400_PORT_RX_MODE_ODD_PARITY		0x00000008
-#define IXP2400_PORT_RX_MODE_NO_PARITY		0x00000000
-#define IXP2400_PORT_RX_MODE_UTOPIA_BIG_CELLS	0x00000002
-#define IXP2400_PORT_RX_MODE_UTOPIA_NORMAL_CELLS	0x00000000
-#define IXP2400_PORT_RX_MODE_2_CYCLE_DECODE	0x00000001
-#define IXP2400_PORT_RX_MODE_1_CYCLE_DECODE	0x00000000
-
-#define IXP2400_TX_MODE_CSIX			0x00400000
-#define IXP2400_TX_MODE_UTOPIA_POS		0x00000000
-#define IXP2400_TX_MODE_WIDTH_MASK		0x00300000
-#define IXP2400_TX_MODE_1x16_2x8		0x00300000
-#define IXP2400_TX_MODE_4x8			0x00200000
-#define IXP2400_TX_MODE_2x16			0x00100000
-#define IXP2400_TX_MODE_1x32			0x00000000
-#define IXP2400_TX_MODE_MPHY			0x00080000
-#define IXP2400_TX_MODE_SPHY			0x00000000
-#define IXP2400_TX_MODE_MPHY_32			0x00040000
-#define IXP2400_TX_MODE_MPHY_4			0x00000000
-#define IXP2400_TX_MODE_MPHY_POLLED_STATUS	0x00020000
-#define IXP2400_TX_MODE_MPHY_DIRECT_STATUS	0x00000000
-#define IXP2400_TX_MODE_CBUS_FULL_DUPLEX	0x00010000
-#define IXP2400_TX_MODE_CBUS_SIMPLEX		0x00000000
-#define IXP2400_TX_MODE_MPHY_LEVEL2		0x00004000
-#define IXP2400_TX_MODE_MPHY_LEVEL3		0x00000000
-#define IXP2400_TX_MODE_CBUS_8BIT		0x00002000
-#define IXP2400_TX_MODE_CBUS_4BIT		0x00000000
-#define IXP2400_TX_MODE_TBUF_SIZE_MASK		0x0000000c
-#define IXP2400_TX_MODE_TBUF_SIZE_256		0x00000008
-#define IXP2400_TX_MODE_TBUF_SIZE_128		0x00000004
-#define IXP2400_TX_MODE_TBUF_SIZE_64		0x00000000
-
-#define IXP2400_PORT_TX_MODE_SLAVE		0x00000040
-#define IXP2400_PORT_TX_MODE_MASTER		0x00000000
-#define IXP2400_PORT_TX_MODE_POS_PHY		0x00000010
-#define IXP2400_PORT_TX_MODE_UTOPIA		0x00000000
-#define IXP2400_PORT_TX_MODE_EVEN_PARITY	0x0000000c
-#define IXP2400_PORT_TX_MODE_ODD_PARITY		0x00000008
-#define IXP2400_PORT_TX_MODE_NO_PARITY		0x00000000
-#define IXP2400_PORT_TX_MODE_UTOPIA_BIG_CELLS	0x00000002
-#define IXP2400_PORT_TX_MODE_2_CYCLE_DECODE	0x00000001
-#define IXP2400_PORT_TX_MODE_1_CYCLE_DECODE	0x00000000
-
-
-#endif
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc
deleted file mode 100644
index 42a73e35..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc
+++ /dev/null
@@ -1,408 +0,0 @@
-/*
- * RX ucode for the Intel IXP2400 in POS-PHY mode.
- * Copyright (C) 2004, 2005 Lennert Buytenhek
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Assumptions made in this code:
- * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
- *   only one full element list is used.  This includes, for example,
- *   1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4.  (This
- *   is not an exhaustive list.)
- * - The RBUF uses 64-byte mpackets.
- * - RX descriptors reside in SRAM, and have the following format:
- *	struct rx_desc
- *	{
- *	// to uengine
- *		u32	buf_phys_addr;
- *		u32	buf_length;
- *
- *	// from uengine
- *		u32	channel;
- *		u32	pkt_length;
- *	};
- * - Packet data resides in DRAM.
- * - Packet buffer addresses are 8-byte aligned.
- * - Scratch ring 0 is rx_pending.
- * - Scratch ring 1 is rx_done, and has status condition 'full'.
- * - The host triggers rx_done flush and rx_pending refill on seeing INTA.
- * - This code is run on all eight threads of the microengine it runs on.
- *
- * Local memory is used for per-channel RX state.
- */
-
-#define RX_THREAD_FREELIST_0		0x0030
-#define RBUF_ELEMENT_DONE		0x0044
-
-#define CHANNEL_FLAGS			*l$index0[0]
-#define CHANNEL_FLAG_RECEIVING		1
-#define PACKET_LENGTH			*l$index0[1]
-#define PACKET_CHECKSUM			*l$index0[2]
-#define BUFFER_HANDLE			*l$index0[3]
-#define BUFFER_START			*l$index0[4]
-#define BUFFER_LENGTH			*l$index0[5]
-
-#define CHANNEL_STATE_SIZE		24	// in bytes
-#define CHANNEL_STATE_SHIFT		5	// ceil(log2(state size))
-
-
-	.sig volatile sig1
-	.sig volatile sig2
-	.sig volatile sig3
-
-	.sig mpacket_arrived
-	.reg add_to_rx_freelist
-	.reg read $rsw0, $rsw1
-	.xfer_order $rsw0 $rsw1
-
-	.reg zero
-
-	/*
-	 * Initialise add_to_rx_freelist.
-	 */
-	.begin
-		.reg temp
-		.reg temp2
-
-		immed[add_to_rx_freelist, RX_THREAD_FREELIST_0]
-		immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))]
-
-		local_csr_rd[ACTIVE_CTX_STS]
-		immed[temp, 0]
-		alu[temp2, temp, and, 0x1f]
-		alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20]
-		alu[temp2, temp, and, 0x80]
-		alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18]
-	.end
-
-	immed[zero, 0]
-
-	/*
-	 * Skip context 0 initialisation?
-	 */
-	.begin
-		br!=ctx[0, mpacket_receive_loop#]
-	.end
-
-	/*
-	 * Initialise local memory.
-	 */
-	.begin
-		.reg addr
-		.reg temp
-
-		immed[temp, 0]
-	init_local_mem_loop#:
-		alu_shf[addr, --, b, temp, <<CHANNEL_STATE_SHIFT]
-		local_csr_wr[ACTIVE_LM_ADDR_0, addr]
-		nop
-		nop
-		nop
-
-		immed[CHANNEL_FLAGS, 0]
-
-		alu[temp, temp, +, 1]
-		alu[--, temp, and, 0x20]
-		beq[init_local_mem_loop#]
-	.end
-
-	/*
-	 * Initialise signal pipeline.
-	 */
-	.begin
-		local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
-		.set_sig sig1
-
-		local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
-		.set_sig sig2
-
-		local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
-		.set_sig sig3
-	.end
-
-mpacket_receive_loop#:
-	/*
-	 * Synchronise and wait for mpacket.
-	 */
-	.begin
-		ctx_arb[sig1]
-		local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
-
-		msf[fast_wr, --, add_to_rx_freelist, 0]
-		.set_sig mpacket_arrived
-		ctx_arb[mpacket_arrived]
-		.set $rsw0 $rsw1
-	.end
-
-	/*
-	 * We halt if we see {inbparerr,parerr,null,soperror}.
-	 */
-	.begin
-		alu_shf[--, 0x1b, and, $rsw0, >>8]
-		bne[abort_rswerr#]
-	.end
-
-	/*
-	 * Point local memory pointer to this channel's state area.
-	 */
-	.begin
-		.reg chanaddr
-
-		alu[chanaddr, $rsw0, and, 0x1f]
-		alu_shf[chanaddr, --, b, chanaddr, <<CHANNEL_STATE_SHIFT]
-		local_csr_wr[ACTIVE_LM_ADDR_0, chanaddr]
-		nop
-		nop
-		nop
-	.end
-
-	/*
-	 * Check whether we received a SOP mpacket while we were already
-	 * working on a packet, or a non-SOP mpacket while there was no
-	 * packet pending.  (SOP == RECEIVING -> abort)  If everything's
-	 * okay, update the RECEIVING flag to reflect our new state.
-	 */
-	.begin
-		.reg temp
-		.reg eop
-
-		#if CHANNEL_FLAG_RECEIVING != 1
-		#error CHANNEL_FLAG_RECEIVING is not 1
-		#endif
-
-		alu_shf[temp, 1, and, $rsw0, >>15]
-		alu[temp, temp, xor, CHANNEL_FLAGS]
-		alu[--, temp, and, CHANNEL_FLAG_RECEIVING]
-		beq[abort_proterr#]
-
-		alu_shf[eop, 1, and, $rsw0, >>14]
-		alu[CHANNEL_FLAGS, temp, xor, eop]
-	.end
-
-	/*
-	 * Copy the mpacket into the right spot, and in case of EOP,
-	 * write back the descriptor and pass the packet on.
-	 */
-	.begin
-		.reg buffer_offset
-		.reg _packet_length
-		.reg _packet_checksum
-		.reg _buffer_handle
-		.reg _buffer_start
-		.reg _buffer_length
-
-		/*
-		 * Determine buffer_offset, _packet_length and
-		 * _packet_checksum.
-		 */
-		.begin
-			.reg temp
-
-			alu[--, 1, and, $rsw0, >>15]
-			beq[not_sop#]
-
-			immed[PACKET_LENGTH, 0]
-			immed[PACKET_CHECKSUM, 0]
-
-		not_sop#:
-			alu[buffer_offset, --, b, PACKET_LENGTH]
-			alu_shf[temp, 0xff, and, $rsw0, >>16]
-			alu[_packet_length, buffer_offset, +, temp]
-			alu[PACKET_LENGTH, --, b, _packet_length]
-
-			immed[temp, 0xffff]
-			alu[temp, $rsw1, and, temp]
-			alu[_packet_checksum, PACKET_CHECKSUM, +, temp]
-			alu[PACKET_CHECKSUM, --, b, _packet_checksum]
-		.end
-
-		/*
-		 * Allocate buffer in case of SOP.
-		 */
-		.begin
-			.reg temp
-
-			alu[temp, 1, and, $rsw0, >>15]
-			beq[skip_buffer_alloc#]
-
-			.begin
-				.sig zzz
-				.reg read $stemp $stemp2
-				.xfer_order $stemp $stemp2
-
-			rx_nobufs#:
-				scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz]
-				alu[_buffer_handle, --, b, $stemp]
-				beq[rx_nobufs#]
-
-				sram[read, $stemp, _buffer_handle, 0, 2],
-								ctx_swap[zzz]
-				alu[_buffer_start, --, b, $stemp]
-				alu[_buffer_length, --, b, $stemp2]
-			.end
-
-		skip_buffer_alloc#:
-		.end
-
-		/*
-		 * Resynchronise.
-		 */
-		.begin
-			ctx_arb[sig2]
-			local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
-		.end
-
-		/*
-		 * Synchronise buffer state.
-		 */
-		.begin
-			.reg temp
-
-			alu[temp, 1, and, $rsw0, >>15]
-			beq[copy_from_local_mem#]
-
-			alu[BUFFER_HANDLE, --, b, _buffer_handle]
-			alu[BUFFER_START, --, b, _buffer_start]
-			alu[BUFFER_LENGTH, --, b, _buffer_length]
-			br[sync_state_done#]
-
-		copy_from_local_mem#:
-			alu[_buffer_handle, --, b, BUFFER_HANDLE]
-			alu[_buffer_start, --, b, BUFFER_START]
-			alu[_buffer_length, --, b, BUFFER_LENGTH]
-
-		sync_state_done#:
-		.end
-
-#if 0
-		/*
-		 * Debug buffer state management.
-		 */
-		.begin
-			.reg temp
-
-			alu[temp, 1, and, $rsw0, >>14]
-			beq[no_poison#]
-			immed[BUFFER_HANDLE, 0xdead]
-			immed[BUFFER_START, 0xdead]
-			immed[BUFFER_LENGTH, 0xdead]
-		no_poison#:
-
-			immed[temp, 0xdead]
-			alu[--, _buffer_handle, -, temp]
-			beq[state_corrupted#]
-			alu[--, _buffer_start, -, temp]
-			beq[state_corrupted#]
-			alu[--, _buffer_length, -, temp]
-			beq[state_corrupted#]
-		.end
-#endif
-
-		/*
-		 * Check buffer length.
-		 */
-		.begin
-			alu[--, _buffer_length, -, _packet_length]
-			blo[buffer_overflow#]
-		.end
-
-		/*
-		 * Copy the mpacket and give back the RBUF element.
-		 */
-		.begin
-			.reg element
-			.reg xfer_size
-			.reg temp
-			.sig copy_sig
-
-			alu_shf[element, 0x7f, and, $rsw0, >>24]
-			alu_shf[xfer_size, 0xff, and, $rsw0, >>16]
-
-			alu[xfer_size, xfer_size, -, 1]
-			alu_shf[xfer_size, 0x10, or, xfer_size, >>3]
-			alu_shf[temp, 0x10, or, xfer_size, <<21]
-			alu_shf[temp, temp, or, element, <<11]
-			alu_shf[--, temp, or, 1, <<18]
-
-			dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8],
-						indirect_ref, sig_done[copy_sig]
-			ctx_arb[copy_sig]
-
-			alu[temp, RBUF_ELEMENT_DONE, or, element, <<16]
-			msf[fast_wr, --, temp, 0]
-		.end
-
-		/*
-		 * If EOP, write back the packet descriptor.
-		 */
-		.begin
-			.reg write $stemp $stemp2
-			.xfer_order $stemp $stemp2
-			.sig zzz
-
-			alu_shf[--, 1, and, $rsw0, >>14]
-			beq[no_writeback#]
-
-			alu[$stemp, $rsw0, and, 0x1f]
-			alu[$stemp2, --, b, _packet_length]
-			sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz]
-
-		no_writeback#:
-		.end
-
-		/*
-		 * Resynchronise.
-		 */
-		.begin
-			ctx_arb[sig3]
-			local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
-		.end
-
-		/*
-		 * If EOP, put the buffer back onto the scratch ring.
-		 */
-		.begin
-			.reg write $stemp
-			.sig zzz
-
-			br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#]
-
-			alu_shf[--, 1, and, $rsw0, >>14]
-			beq[mpacket_receive_loop#]
-
-			alu[--, 1, and, $rsw0, >>10]
-			bne[rxerr#]
-
-			alu[$stemp, --, b, _buffer_handle]
-			scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz]
-			cap[fast_wr, 0, XSCALE_INT_A]
-			br[mpacket_receive_loop#]
-
-		rxerr#:
-			alu[$stemp, --, b, _buffer_handle]
-			scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz]
-			br[mpacket_receive_loop#]
-		.end
-	.end
-
-
-abort_rswerr#:
-	halt
-
-abort_proterr#:
-	halt
-
-state_corrupted#:
-	halt
-
-buffer_overflow#:
-	halt
-
-rx_done_ring_overflow#:
-	halt
-
-
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode
deleted file mode 100644
index e8aee2f..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode
+++ /dev/null
@@ -1,130 +0,0 @@
-static struct ixp2000_uengine_code ixp2400_rx =
-{
-	.cpu_model_bitmask	= 0x000003fe,
-	.cpu_min_revision	= 0,
-	.cpu_max_revision	= 255,
-
-	.uengine_parameters	= IXP2000_UENGINE_8_CONTEXTS |
-				  IXP2000_UENGINE_PRN_UPDATE_EVERY |
-				  IXP2000_UENGINE_NN_FROM_PREVIOUS |
-				  IXP2000_UENGINE_ASSERT_EMPTY_AT_0 |
-				  IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT |
-				  IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT,
-
-	.initial_reg_values	= (struct ixp2000_reg_value []) {
-		{ -1, -1 }
-	},
-
-	.num_insns		= 109,
-	.insns			= (u8 []) {
-		0xf0, 0x00, 0x0c, 0xc0, 0x05,
-		0xf4, 0x44, 0x0c, 0x00, 0x05,
-		0xfc, 0x04, 0x4c, 0x00, 0x00,
-		0xf0, 0x00, 0x00, 0x3b, 0x00,
-		0xb4, 0x40, 0xf0, 0x3b, 0x1f,
-		0x8a, 0xc0, 0x50, 0x3e, 0x05,
-		0xb4, 0x40, 0xf0, 0x3b, 0x80,
-		0x9a, 0xe0, 0x00, 0x3e, 0x05,
-		0xf0, 0x00, 0x00, 0x07, 0x00,
-		0xd8, 0x05, 0xc0, 0x00, 0x11,
-		0xf0, 0x00, 0x00, 0x0f, 0x00,
-		0x91, 0xb0, 0x20, 0x0e, 0x00,
-		0xfc, 0x06, 0x60, 0x0b, 0x00,
-		0xf0, 0x00, 0x0c, 0x03, 0x00,
-		0xf0, 0x00, 0x0c, 0x03, 0x00,
-		0xf0, 0x00, 0x0c, 0x03, 0x00,
-		0xf0, 0x00, 0x0c, 0x02, 0x00,
-		0xb0, 0xc0, 0x30, 0x0f, 0x01,
-		0xa4, 0x70, 0x00, 0x0f, 0x20,
-		0xd8, 0x02, 0xc0, 0x01, 0x00,
-		0xfc, 0x10, 0xac, 0x23, 0x08,
-		0xfc, 0x10, 0xac, 0x43, 0x10,
-		0xfc, 0x10, 0xac, 0x63, 0x18,
-		0xe0, 0x00, 0x00, 0x00, 0x02,
-		0xfc, 0x10, 0xae, 0x23, 0x88,
-		0x3d, 0x00, 0x04, 0x03, 0x20,
-		0xe0, 0x00, 0x00, 0x00, 0x10,
-		0x84, 0x82, 0x02, 0x01, 0x3b,
-		0xd8, 0x1a, 0x00, 0x01, 0x01,
-		0xb4, 0x00, 0x8c, 0x7d, 0x80,
-		0x91, 0xb0, 0x80, 0x22, 0x00,
-		0xfc, 0x06, 0x60, 0x23, 0x00,
-		0xf0, 0x00, 0x0c, 0x03, 0x00,
-		0xf0, 0x00, 0x0c, 0x03, 0x00,
-		0xf0, 0x00, 0x0c, 0x03, 0x00,
-		0x94, 0xf0, 0x92, 0x01, 0x21,
-		0xac, 0x40, 0x60, 0x26, 0x00,
-		0xa4, 0x30, 0x0c, 0x04, 0x06,
-		0xd8, 0x1a, 0x40, 0x01, 0x00,
-		0x94, 0xe0, 0xa2, 0x01, 0x21,
-		0xac, 0x20, 0x00, 0x28, 0x06,
-		0x84, 0xf2, 0x02, 0x01, 0x21,
-		0xd8, 0x0b, 0x40, 0x01, 0x00,
-		0xf0, 0x00, 0x0c, 0x02, 0x01,
-		0xf0, 0x00, 0x0c, 0x02, 0x02,
-		0xa0, 0x00, 0x08, 0x04, 0x00,
-		0x95, 0x00, 0xc6, 0x01, 0xff,
-		0xa0, 0x80, 0x10, 0x30, 0x00,
-		0xa0, 0x60, 0x1c, 0x00, 0x01,
-		0xf0, 0x0f, 0xf0, 0x33, 0xff,
-		0xb4, 0x00, 0xc0, 0x31, 0x81,
-		0xb0, 0x80, 0xb0, 0x32, 0x02,
-		0xa0, 0x20, 0x20, 0x2c, 0x00,
-		0x94, 0xf0, 0xd2, 0x01, 0x21,
-		0xd8, 0x0f, 0x40, 0x01, 0x00,
-		0x19, 0x40, 0x10, 0x04, 0x20,
-		0xa0, 0x00, 0x26, 0x04, 0x00,
-		0xd8, 0x0d, 0xc0, 0x01, 0x00,
-		0x00, 0x42, 0x10, 0x80, 0x02,
-		0xb0, 0x00, 0x46, 0x04, 0x00,
-		0xb0, 0x00, 0x56, 0x08, 0x00,
-		0xe0, 0x00, 0x00, 0x00, 0x04,
-		0xfc, 0x10, 0xae, 0x43, 0x90,
-		0x84, 0xf0, 0x32, 0x01, 0x21,
-		0xd8, 0x11, 0x40, 0x01, 0x00,
-		0xa0, 0x60, 0x3c, 0x00, 0x02,
-		0xa0, 0x20, 0x40, 0x10, 0x00,
-		0xa0, 0x20, 0x50, 0x14, 0x00,
-		0xd8, 0x12, 0x00, 0x00, 0x18,
-		0xa0, 0x00, 0x28, 0x0c, 0x00,
-		0xb0, 0x00, 0x48, 0x10, 0x00,
-		0xb0, 0x00, 0x58, 0x14, 0x00,
-		0xaa, 0xf0, 0x00, 0x14, 0x01,
-		0xd8, 0x1a, 0xc0, 0x01, 0x05,
-		0x85, 0x80, 0x42, 0x01, 0xff,
-		0x95, 0x00, 0x66, 0x01, 0xff,
-		0xba, 0xc0, 0x60, 0x1b, 0x01,
-		0x9a, 0x30, 0x60, 0x19, 0x30,
-		0x9a, 0xb0, 0x70, 0x1a, 0x30,
-		0x9b, 0x50, 0x78, 0x1e, 0x04,
-		0x8a, 0xe2, 0x08, 0x1e, 0x21,
-		0x6a, 0x4e, 0x00, 0x13, 0x00,
-		0xe0, 0x00, 0x00, 0x00, 0x30,
-		0x9b, 0x00, 0x7a, 0x92, 0x04,
-		0x3d, 0x00, 0x04, 0x1f, 0x20,
-		0x84, 0xe2, 0x02, 0x01, 0x21,
-		0xd8, 0x16, 0x80, 0x01, 0x00,
-		0xa4, 0x18, 0x0c, 0x7d, 0x80,
-		0xa0, 0x58, 0x1c, 0x00, 0x01,
-		0x01, 0x42, 0x00, 0xa0, 0x02,
-		0xe0, 0x00, 0x00, 0x00, 0x08,
-		0xfc, 0x10, 0xae, 0x63, 0x98,
-		0xd8, 0x1b, 0x00, 0xc2, 0x14,
-		0x84, 0xe2, 0x02, 0x01, 0x21,
-		0xd8, 0x05, 0xc0, 0x01, 0x00,
-		0x84, 0xa2, 0x02, 0x01, 0x21,
-		0xd8, 0x19, 0x40, 0x01, 0x01,
-		0xa0, 0x58, 0x0c, 0x00, 0x02,
-		0x1a, 0x40, 0x00, 0x04, 0x24,
-		0x33, 0x00, 0x01, 0x2f, 0x20,
-		0xd8, 0x05, 0xc0, 0x00, 0x18,
-		0xa0, 0x58, 0x0c, 0x00, 0x02,
-		0x1a, 0x40, 0x00, 0x04, 0x20,
-		0xd8, 0x05, 0xc0, 0x00, 0x18,
-		0xe0, 0x00, 0x02, 0x00, 0x00,
-		0xe0, 0x00, 0x02, 0x00, 0x00,
-		0xe0, 0x00, 0x02, 0x00, 0x00,
-		0xe0, 0x00, 0x02, 0x00, 0x00,
-		0xe0, 0x00, 0x02, 0x00, 0x00,
-	}
-};
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
deleted file mode 100644
index d090d18..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * TX ucode for the Intel IXP2400 in POS-PHY mode.
- * Copyright (C) 2004, 2005 Lennert Buytenhek
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Assumptions made in this code:
- * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
- *   only one TBUF partition is used.  This includes, for example,
- *   1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
- *   is not an exhaustive list.)
- * - The TBUF uses 64-byte mpackets.
- * - TX descriptors reside in SRAM, and have the following format:
- *	struct tx_desc
- *	{
- *	// to uengine
- *		u32	buf_phys_addr;
- *		u32	pkt_length;
- *		u32	channel;
- *	};
- * - Packet data resides in DRAM.
- * - Packet buffer addresses are 8-byte aligned.
- * - Scratch ring 2 is tx_pending.
- * - Scratch ring 3 is tx_done, and has status condition 'full'.
- * - This code is run on all eight threads of the microengine it runs on.
- */
-
-#define TX_SEQUENCE_0		0x0060
-#define TBUF_CTRL		0x1800
-
-#define PARTITION_SIZE		128
-#define PARTITION_THRESH	96
-
-
-	.sig volatile sig1
-	.sig volatile sig2
-	.sig volatile sig3
-
-	.reg @old_tx_seq_0
-	.reg @mpkts_in_flight
-	.reg @next_tbuf_mpacket
-
-	.reg @buffer_handle
-	.reg @buffer_start
-	.reg @packet_length
-	.reg @channel
-	.reg @packet_offset
-
-	.reg zero
-
-	immed[zero, 0]
-
-	/*
-	 * Skip context 0 initialisation?
-	 */
-	.begin
-		br!=ctx[0, mpacket_tx_loop#]
-	.end
-
-	/*
-	 * Wait until all pending TBUF elements have been transmitted.
-	 */
-	.begin
-		.reg read $tx
-		.sig zzz
-
-	loop_empty#:
-		msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
-		alu_shf[--, --, b, $tx, >>31]
-		beq[loop_empty#]
-
-		alu[@old_tx_seq_0, --, b, $tx]
-	.end
-
-	immed[@mpkts_in_flight, 0]
-	alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)]
-
-	immed[@buffer_handle, 0]
-
-	/*
-	 * Initialise signal pipeline.
-	 */
-	.begin
-		local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
-		.set_sig sig1
-
-		local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
-		.set_sig sig2
-
-		local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
-		.set_sig sig3
-	.end
-
-mpacket_tx_loop#:
-	.begin
-		.reg tbuf_element_index
-		.reg buffer_handle
-		.reg sop_eop
-		.reg packet_data
-		.reg channel
-		.reg mpacket_size
-
-		/*
-		 * If there is no packet currently being transmitted,
-		 * dequeue the next TX descriptor, and fetch the buffer
-		 * address, packet length and destination channel number.
-		 */
-		.begin
-			.reg read $stemp $stemp2 $stemp3
-			.xfer_order $stemp $stemp2 $stemp3
-			.sig zzz
-
-			ctx_arb[sig1]
-
-			alu[--, --, b, @buffer_handle]
-			bne[already_got_packet#]
-
-		tx_nobufs#:
-			scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz]
-			alu[@buffer_handle, --, b, $stemp]
-			beq[tx_nobufs#]
-
-			sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz]
-			alu[@buffer_start, --, b, $stemp]
-			alu[@packet_length, --, b, $stemp2]
-			beq[zero_byte_packet#]
-			alu[@channel, --, b, $stemp3]
-			immed[@packet_offset, 0]
-
-		already_got_packet#:
-			local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
-		.end
-
-		/*
-		 * Determine tbuf element index, SOP/EOP flags, mpacket
-		 * offset and mpacket size and cache buffer_handle and
-		 * channel number.
-		 */
-		.begin
-			alu[tbuf_element_index, --, b, @next_tbuf_mpacket]
-			alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1]
-			alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and,
-							(PARTITION_SIZE - 1)]
-
-			alu[buffer_handle, --, b, @buffer_handle]
-			immed[@buffer_handle, 0]
-
-			immed[sop_eop, 1]
-
-			alu[packet_data, --, b, @packet_offset]
-			bne[no_sop#]
-			alu[sop_eop, sop_eop, or, 2]
-		no_sop#:
-			alu[packet_data, packet_data, +, @buffer_start]
-
-			alu[channel, --, b, @channel]
-
-			alu[mpacket_size, @packet_length, -, @packet_offset]
-			alu[--, 64, -, mpacket_size]
-			bhs[eop#]
-			alu[@buffer_handle, --, b, buffer_handle]
-			immed[mpacket_size, 64]
-			alu[sop_eop, sop_eop, and, 2]
-		eop#:
-
-			alu[@packet_offset, @packet_offset, +, mpacket_size]
-		.end
-
-		/*
-		 * Wait until there's enough space in the TBUF.
-		 */
-		.begin
-			.reg read $tx
-			.reg temp
-			.sig zzz
-
-			ctx_arb[sig2]
-
-			br[test_space#]
-
-		loop_space#:
-			msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
-
-			alu[temp, $tx, -, @old_tx_seq_0]
-			alu[temp, temp, and, 0xff]
-			alu[@mpkts_in_flight, @mpkts_in_flight, -, temp]
-
-			alu[@old_tx_seq_0, --, b, $tx]
-
-		test_space#:
-			alu[--, PARTITION_THRESH, -, @mpkts_in_flight]
-			blo[loop_space#]
-
-			alu[@mpkts_in_flight, @mpkts_in_flight, +, 1]
-
-			local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
-		.end
-
-		/*
-		 * Copy the packet data to the TBUF.
-		 */
-		.begin
-			.reg temp
-			.sig copy_sig
-
-			alu[temp, mpacket_size, -, 1]
-			alu_shf[temp, 0x10, or, temp, >>3]
-			alu_shf[temp, 0x10, or, temp, <<21]
-			alu_shf[temp, temp, or, tbuf_element_index, <<11]
-			alu_shf[--, temp, or, 1, <<18]
-
-			dram[tbuf_wr, --, packet_data, 0, max_8],
-					indirect_ref, sig_done[copy_sig]
-			ctx_arb[copy_sig]
-		.end
-
-		/*
-		 * Mark TBUF element as ready-to-be-transmitted.
-		 */
-		.begin
-			.reg write $tsw $tsw2
-			.xfer_order $tsw $tsw2
-			.reg temp
-			.sig zzz
-
-			alu_shf[temp, channel, or, mpacket_size, <<24]
-			alu_shf[$tsw, temp, or, sop_eop, <<8]
-			immed[$tsw2, 0]
-
-			immed[temp, TBUF_CTRL]
-			alu_shf[temp, temp, or, tbuf_element_index, <<3]
-			msf[write, $tsw, temp, 0, 2], ctx_swap[zzz]
-		.end
-
-		/*
-		 * Resynchronise.
-		 */
-		.begin
-			ctx_arb[sig3]
-			local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
-		.end
-
-		/*
-		 * If this was an EOP mpacket, recycle the TX buffer
-	 	 * and signal the host.
-		 */
-		.begin
-			.reg write $stemp
-			.sig zzz
-
-			alu[--, sop_eop, and, 1]
-			beq[mpacket_tx_loop#]
-
-		tx_done_ring_full#:
-			br_inp_state[SCR_Ring3_Status, tx_done_ring_full#]
-
-			alu[$stemp, --, b, buffer_handle]
-			scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz]
-			cap[fast_wr, 0, XSCALE_INT_A]
-			br[mpacket_tx_loop#]
-		.end
-	.end
-
-
-zero_byte_packet#:
-	halt
-
-
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode
deleted file mode 100644
index a433e24..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode
+++ /dev/null
@@ -1,98 +0,0 @@
-static struct ixp2000_uengine_code ixp2400_tx =
-{
-	.cpu_model_bitmask	= 0x000003fe,
-	.cpu_min_revision	= 0,
-	.cpu_max_revision	= 255,
-
-	.uengine_parameters	= IXP2000_UENGINE_8_CONTEXTS |
-				  IXP2000_UENGINE_PRN_UPDATE_EVERY |
-				  IXP2000_UENGINE_NN_FROM_PREVIOUS |
-				  IXP2000_UENGINE_ASSERT_EMPTY_AT_0 |
-				  IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT |
-				  IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT,
-
-	.initial_reg_values	= (struct ixp2000_reg_value []) {
-		{ -1, -1 }
-	},
-
-	.num_insns		= 77,
-	.insns			= (u8 []) {
-		0xf0, 0x00, 0x00, 0x07, 0x00,
-		0xd8, 0x03, 0x00, 0x00, 0x11,
-		0x3c, 0x40, 0x00, 0x04, 0xe0,
-		0x81, 0xf2, 0x02, 0x01, 0x00,
-		0xd8, 0x00, 0x80, 0x01, 0x00,
-		0xb0, 0x08, 0x06, 0x00, 0x00,
-		0xf0, 0x00, 0x0c, 0x00, 0x80,
-		0xb4, 0x49, 0x02, 0x03, 0x7f,
-		0xf0, 0x00, 0x02, 0x83, 0x00,
-		0xfc, 0x10, 0xac, 0x23, 0x08,
-		0xfc, 0x10, 0xac, 0x43, 0x10,
-		0xfc, 0x10, 0xac, 0x63, 0x18,
-		0xe0, 0x00, 0x00, 0x00, 0x02,
-		0xa0, 0x30, 0x02, 0x80, 0x00,
-		0xd8, 0x06, 0x00, 0x01, 0x01,
-		0x19, 0x40, 0x00, 0x04, 0x28,
-		0xb0, 0x0a, 0x06, 0x00, 0x00,
-		0xd8, 0x03, 0xc0, 0x01, 0x00,
-		0x00, 0x44, 0x00, 0x80, 0x80,
-		0xa0, 0x09, 0x06, 0x00, 0x00,
-		0xb0, 0x0b, 0x06, 0x04, 0x00,
-		0xd8, 0x13, 0x00, 0x01, 0x00,
-		0xb0, 0x0c, 0x06, 0x08, 0x00,
-		0xf0, 0x00, 0x0c, 0x00, 0xa0,
-		0xfc, 0x10, 0xae, 0x23, 0x88,
-		0xa0, 0x00, 0x12, 0x40, 0x00,
-		0xb0, 0xc9, 0x02, 0x43, 0x01,
-		0xb4, 0x49, 0x02, 0x43, 0x7f,
-		0xb0, 0x00, 0x22, 0x80, 0x00,
-		0xf0, 0x00, 0x02, 0x83, 0x00,
-		0xf0, 0x00, 0x0c, 0x04, 0x02,
-		0xb0, 0x40, 0x6c, 0x00, 0xa0,
-		0xd8, 0x08, 0x80, 0x01, 0x01,
-		0xaa, 0x00, 0x2c, 0x08, 0x02,
-		0xa0, 0xc0, 0x30, 0x18, 0x90,
-		0xa0, 0x00, 0x43, 0x00, 0x00,
-		0xba, 0xc0, 0x32, 0xc0, 0xa0,
-		0xaa, 0xb0, 0x00, 0x0f, 0x40,
-		0xd8, 0x0a, 0x80, 0x01, 0x04,
-		0xb0, 0x0a, 0x00, 0x08, 0x00,
-		0xf0, 0x00, 0x00, 0x0f, 0x40,
-		0xa4, 0x00, 0x2c, 0x08, 0x02,
-		0xa0, 0x8a, 0x00, 0x0c, 0xa0,
-		0xe0, 0x00, 0x00, 0x00, 0x04,
-		0xd8, 0x0c, 0x80, 0x00, 0x18,
-		0x3c, 0x40, 0x00, 0x04, 0xe0,
-		0xba, 0x80, 0x42, 0x01, 0x80,
-		0xb4, 0x40, 0x40, 0x13, 0xff,
-		0xaa, 0x88, 0x00, 0x10, 0x80,
-		0xb0, 0x08, 0x06, 0x00, 0x00,
-		0xaa, 0xf0, 0x0d, 0x80, 0x80,
-		0xd8, 0x0b, 0x40, 0x01, 0x05,
-		0xa0, 0x88, 0x0c, 0x04, 0x80,
-		0xfc, 0x10, 0xae, 0x43, 0x90,
-		0xba, 0xc0, 0x50, 0x0f, 0x01,
-		0x9a, 0x30, 0x50, 0x15, 0x30,
-		0x9a, 0xb0, 0x50, 0x16, 0x30,
-		0x9b, 0x50, 0x58, 0x16, 0x01,
-		0x8a, 0xe2, 0x08, 0x16, 0x21,
-		0x6b, 0x4e, 0x00, 0x83, 0x03,
-		0xe0, 0x00, 0x00, 0x00, 0x30,
-		0x9a, 0x80, 0x70, 0x0e, 0x04,
-		0x8b, 0x88, 0x08, 0x1e, 0x02,
-		0xf0, 0x00, 0x0c, 0x01, 0x81,
-		0xf0, 0x01, 0x80, 0x1f, 0x00,
-		0x9b, 0xd0, 0x78, 0x1e, 0x01,
-		0x3d, 0x42, 0x00, 0x1c, 0x20,
-		0xe0, 0x00, 0x00, 0x00, 0x08,
-		0xfc, 0x10, 0xae, 0x63, 0x98,
-		0xa4, 0x30, 0x0c, 0x04, 0x02,
-		0xd8, 0x03, 0x00, 0x01, 0x00,
-		0xd8, 0x11, 0xc1, 0x42, 0x14,
-		0xa0, 0x18, 0x00, 0x08, 0x00,
-		0x1a, 0x40, 0x00, 0x04, 0x2c,
-		0x33, 0x00, 0x01, 0x2f, 0x20,
-		0xd8, 0x03, 0x00, 0x00, 0x18,
-		0xe0, 0x00, 0x02, 0x00, 0x00,
-	}
-};
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixpdev.c b/drivers/net/ethernet/xscale/ixp2000/ixpdev.c
deleted file mode 100644
index 4500837..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/ixpdev.c
+++ /dev/null
@@ -1,437 +0,0 @@
-/*
- * IXP2000 MSF network device driver
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/gfp.h>
-#include <asm/hardware/uengine.h>
-#include <asm/io.h>
-#include "ixp2400_rx.ucode"
-#include "ixp2400_tx.ucode"
-#include "ixpdev_priv.h"
-#include "ixpdev.h"
-#include "pm3386.h"
-
-#define DRV_MODULE_VERSION	"0.2"
-
-static int nds_count;
-static struct net_device **nds;
-static int nds_open;
-static void (*set_port_admin_status)(int port, int up);
-
-static struct ixpdev_rx_desc * const rx_desc =
-	(struct ixpdev_rx_desc *)(IXP2000_SRAM0_VIRT_BASE + RX_BUF_DESC_BASE);
-static struct ixpdev_tx_desc * const tx_desc =
-	(struct ixpdev_tx_desc *)(IXP2000_SRAM0_VIRT_BASE + TX_BUF_DESC_BASE);
-static int tx_pointer;
-
-
-static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct ixpdev_priv *ip = netdev_priv(dev);
-	struct ixpdev_tx_desc *desc;
-	int entry;
-	unsigned long flags;
-
-	if (unlikely(skb->len > PAGE_SIZE)) {
-		/* @@@ Count drops.  */
-		dev_kfree_skb(skb);
-		return NETDEV_TX_OK;
-	}
-
-	entry = tx_pointer;
-	tx_pointer = (tx_pointer + 1) % TX_BUF_COUNT;
-
-	desc = tx_desc + entry;
-	desc->pkt_length = skb->len;
-	desc->channel = ip->channel;
-
-	skb_copy_and_csum_dev(skb, phys_to_virt(desc->buf_addr));
-	dev_kfree_skb(skb);
-
-	ixp2000_reg_write(RING_TX_PENDING,
-		TX_BUF_DESC_BASE + (entry * sizeof(struct ixpdev_tx_desc)));
-
-	local_irq_save(flags);
-	ip->tx_queue_entries++;
-	if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
-		netif_stop_queue(dev);
-	local_irq_restore(flags);
-
-	return NETDEV_TX_OK;
-}
-
-
-static int ixpdev_rx(struct net_device *dev, int processed, int budget)
-{
-	while (processed < budget) {
-		struct ixpdev_rx_desc *desc;
-		struct sk_buff *skb;
-		void *buf;
-		u32 _desc;
-
-		_desc = ixp2000_reg_read(RING_RX_DONE);
-		if (_desc == 0)
-			return 0;
-
-		desc = rx_desc +
-			((_desc - RX_BUF_DESC_BASE) / sizeof(struct ixpdev_rx_desc));
-		buf = phys_to_virt(desc->buf_addr);
-
-		if (desc->pkt_length < 4 || desc->pkt_length > PAGE_SIZE) {
-			printk(KERN_ERR "ixp2000: rx err, length %d\n",
-					desc->pkt_length);
-			goto err;
-		}
-
-		if (desc->channel < 0 || desc->channel >= nds_count) {
-			printk(KERN_ERR "ixp2000: rx err, channel %d\n",
-					desc->channel);
-			goto err;
-		}
-
-		/* @@@ Make FCS stripping configurable.  */
-		desc->pkt_length -= 4;
-
-		if (unlikely(!netif_running(nds[desc->channel])))
-			goto err;
-
-		skb = netdev_alloc_skb_ip_align(dev, desc->pkt_length);
-		if (likely(skb != NULL)) {
-			skb_copy_to_linear_data(skb, buf, desc->pkt_length);
-			skb_put(skb, desc->pkt_length);
-			skb->protocol = eth_type_trans(skb, nds[desc->channel]);
-
-			netif_receive_skb(skb);
-		}
-
-err:
-		ixp2000_reg_write(RING_RX_PENDING, _desc);
-		processed++;
-	}
-
-	return processed;
-}
-
-/* dev always points to nds[0].  */
-static int ixpdev_poll(struct napi_struct *napi, int budget)
-{
-	struct ixpdev_priv *ip = container_of(napi, struct ixpdev_priv, napi);
-	struct net_device *dev = ip->dev;
-	int rx;
-
-	rx = 0;
-	do {
-		ixp2000_reg_write(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0x00ff);
-
-		rx = ixpdev_rx(dev, rx, budget);
-		if (rx >= budget)
-			break;
-	} while (ixp2000_reg_read(IXP2000_IRQ_THD_RAW_STATUS_A_0) & 0x00ff);
-
-	napi_complete(napi);
-	ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0x00ff);
-
-	return rx;
-}
-
-static void ixpdev_tx_complete(void)
-{
-	int channel;
-	u32 wake;
-
-	wake = 0;
-	while (1) {
-		struct ixpdev_priv *ip;
-		u32 desc;
-		int entry;
-
-		desc = ixp2000_reg_read(RING_TX_DONE);
-		if (desc == 0)
-			break;
-
-		/* @@@ Check whether entries come back in order.  */
-		entry = (desc - TX_BUF_DESC_BASE) / sizeof(struct ixpdev_tx_desc);
-		channel = tx_desc[entry].channel;
-
-		if (channel < 0 || channel >= nds_count) {
-			printk(KERN_ERR "ixp2000: txcomp channel index "
-					"out of bounds (%d, %.8i, %d)\n",
-					channel, (unsigned int)desc, entry);
-			continue;
-		}
-
-		ip = netdev_priv(nds[channel]);
-		if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
-			wake |= 1 << channel;
-		ip->tx_queue_entries--;
-	}
-
-	for (channel = 0; wake != 0; channel++) {
-		if (wake & (1 << channel)) {
-			netif_wake_queue(nds[channel]);
-			wake &= ~(1 << channel);
-		}
-	}
-}
-
-static irqreturn_t ixpdev_interrupt(int irq, void *dev_id)
-{
-	u32 status;
-
-	status = ixp2000_reg_read(IXP2000_IRQ_THD_STATUS_A_0);
-	if (status == 0)
-		return IRQ_NONE;
-
-	/*
-	 * Any of the eight receive units signaled RX?
-	 */
-	if (status & 0x00ff) {
-		struct net_device *dev = nds[0];
-		struct ixpdev_priv *ip = netdev_priv(dev);
-
-		ixp2000_reg_wrb(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0x00ff);
-		if (likely(napi_schedule_prep(&ip->napi))) {
-			__napi_schedule(&ip->napi);
-		} else {
-			printk(KERN_CRIT "ixp2000: irq while polling!!\n");
-		}
-	}
-
-	/*
-	 * Any of the eight transmit units signaled TXdone?
-	 */
-	if (status & 0xff00) {
-		ixp2000_reg_wrb(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0xff00);
-		ixpdev_tx_complete();
-	}
-
-	return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void ixpdev_poll_controller(struct net_device *dev)
-{
-	disable_irq(IRQ_IXP2000_THDA0);
-	ixpdev_interrupt(IRQ_IXP2000_THDA0, dev);
-	enable_irq(IRQ_IXP2000_THDA0);
-}
-#endif
-
-static int ixpdev_open(struct net_device *dev)
-{
-	struct ixpdev_priv *ip = netdev_priv(dev);
-	int err;
-
-	napi_enable(&ip->napi);
-	if (!nds_open++) {
-		err = request_irq(IRQ_IXP2000_THDA0, ixpdev_interrupt,
-					IRQF_SHARED, "ixp2000_eth", nds);
-		if (err) {
-			nds_open--;
-			napi_disable(&ip->napi);
-			return err;
-		}
-
-		ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0xffff);
-	}
-
-	set_port_admin_status(ip->channel, 1);
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-static int ixpdev_close(struct net_device *dev)
-{
-	struct ixpdev_priv *ip = netdev_priv(dev);
-
-	netif_stop_queue(dev);
-	napi_disable(&ip->napi);
-	set_port_admin_status(ip->channel, 0);
-
-	if (!--nds_open) {
-		ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0xffff);
-		free_irq(IRQ_IXP2000_THDA0, nds);
-	}
-
-	return 0;
-}
-
-static struct net_device_stats *ixpdev_get_stats(struct net_device *dev)
-{
-	struct ixpdev_priv *ip = netdev_priv(dev);
-
-	pm3386_get_stats(ip->channel, &(dev->stats));
-
-	return &(dev->stats);
-}
-
-static const struct net_device_ops ixpdev_netdev_ops = {
-	.ndo_open		= ixpdev_open,
-	.ndo_stop		= ixpdev_close,
-	.ndo_start_xmit		= ixpdev_xmit,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_get_stats		= ixpdev_get_stats,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= ixpdev_poll_controller,
-#endif
-};
-
-struct net_device *ixpdev_alloc(int channel, int sizeof_priv)
-{
-	struct net_device *dev;
-	struct ixpdev_priv *ip;
-
-	dev = alloc_etherdev(sizeof_priv);
-	if (dev == NULL)
-		return NULL;
-
-	dev->netdev_ops = &ixpdev_netdev_ops;
-
-	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
-
-	ip = netdev_priv(dev);
-	ip->dev = dev;
-	netif_napi_add(dev, &ip->napi, ixpdev_poll, 64);
-	ip->channel = channel;
-	ip->tx_queue_entries = 0;
-
-	return dev;
-}
-
-int ixpdev_init(int __nds_count, struct net_device **__nds,
-		void (*__set_port_admin_status)(int port, int up))
-{
-	int i;
-	int err;
-
-	BUILD_BUG_ON(RX_BUF_COUNT > 192 || TX_BUF_COUNT > 192);
-
-	printk(KERN_INFO "IXP2000 MSF ethernet driver %s\n", DRV_MODULE_VERSION);
-
-	nds_count = __nds_count;
-	nds = __nds;
-	set_port_admin_status = __set_port_admin_status;
-
-	for (i = 0; i < RX_BUF_COUNT; i++) {
-		void *buf;
-
-		buf = (void *)get_zeroed_page(GFP_KERNEL);
-		if (buf == NULL) {
-			err = -ENOMEM;
-			while (--i >= 0)
-				free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
-			goto err_out;
-		}
-		rx_desc[i].buf_addr = virt_to_phys(buf);
-		rx_desc[i].buf_length = PAGE_SIZE;
-	}
-
-	/* @@@ Maybe we shouldn't be preallocating TX buffers.  */
-	for (i = 0; i < TX_BUF_COUNT; i++) {
-		void *buf;
-
-		buf = (void *)get_zeroed_page(GFP_KERNEL);
-		if (buf == NULL) {
-			err = -ENOMEM;
-			while (--i >= 0)
-				free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
-			goto err_free_rx;
-		}
-		tx_desc[i].buf_addr = virt_to_phys(buf);
-	}
-
-	/* 256 entries, ring status set means 'empty', base address 0x0000.  */
-	ixp2000_reg_write(RING_RX_PENDING_BASE, 0x44000000);
-	ixp2000_reg_write(RING_RX_PENDING_HEAD, 0x00000000);
-	ixp2000_reg_write(RING_RX_PENDING_TAIL, 0x00000000);
-
-	/* 256 entries, ring status set means 'full', base address 0x0400.  */
-	ixp2000_reg_write(RING_RX_DONE_BASE, 0x40000400);
-	ixp2000_reg_write(RING_RX_DONE_HEAD, 0x00000000);
-	ixp2000_reg_write(RING_RX_DONE_TAIL, 0x00000000);
-
-	for (i = 0; i < RX_BUF_COUNT; i++) {
-		ixp2000_reg_write(RING_RX_PENDING,
-			RX_BUF_DESC_BASE + (i * sizeof(struct ixpdev_rx_desc)));
-	}
-
-	ixp2000_uengine_load(0, &ixp2400_rx);
-	ixp2000_uengine_start_contexts(0, 0xff);
-
-	/* 256 entries, ring status set means 'empty', base address 0x0800.  */
-	ixp2000_reg_write(RING_TX_PENDING_BASE, 0x44000800);
-	ixp2000_reg_write(RING_TX_PENDING_HEAD, 0x00000000);
-	ixp2000_reg_write(RING_TX_PENDING_TAIL, 0x00000000);
-
-	/* 256 entries, ring status set means 'full', base address 0x0c00.  */
-	ixp2000_reg_write(RING_TX_DONE_BASE, 0x40000c00);
-	ixp2000_reg_write(RING_TX_DONE_HEAD, 0x00000000);
-	ixp2000_reg_write(RING_TX_DONE_TAIL, 0x00000000);
-
-	ixp2000_uengine_load(1, &ixp2400_tx);
-	ixp2000_uengine_start_contexts(1, 0xff);
-
-	for (i = 0; i < nds_count; i++) {
-		err = register_netdev(nds[i]);
-		if (err) {
-			while (--i >= 0)
-				unregister_netdev(nds[i]);
-			goto err_free_tx;
-		}
-	}
-
-	for (i = 0; i < nds_count; i++) {
-		printk(KERN_INFO "%s: IXP2000 MSF ethernet (port %d), %pM.\n",
-				 nds[i]->name, i, nds[i]->dev_addr);
-	}
-
-	return 0;
-
-err_free_tx:
-	for (i = 0; i < TX_BUF_COUNT; i++)
-		free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
-
-err_free_rx:
-	for (i = 0; i < RX_BUF_COUNT; i++)
-		free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
-
-err_out:
-	return err;
-} 
-
-void ixpdev_deinit(void)
-{
-	int i;
-
-	/* @@@ Flush out pending packets.  */
-
-	for (i = 0; i < nds_count; i++)
-		unregister_netdev(nds[i]);
-
-	ixp2000_uengine_stop_contexts(1, 0xff);
-	ixp2000_uengine_stop_contexts(0, 0xff);
-	ixp2000_uengine_reset(0x3);
-
-	for (i = 0; i < TX_BUF_COUNT; i++)
-		free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr));
-
-	for (i = 0; i < RX_BUF_COUNT; i++)
-		free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr));
-}
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixpdev.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev.h
deleted file mode 100644
index 391ece6..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/ixpdev.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * IXP2000 MSF network device driver
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __IXPDEV_H
-#define __IXPDEV_H
-
-struct ixpdev_priv
-{
-	struct net_device *dev;
-	struct napi_struct napi;
-	int	channel;
-	int	tx_queue_entries;
-};
-
-struct net_device *ixpdev_alloc(int channel, int sizeof_priv);
-int ixpdev_init(int num_ports, struct net_device **nds,
-		void (*set_port_admin_status)(int port, int up));
-void ixpdev_deinit(void);
-
-
-#endif
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h
deleted file mode 100644
index 86aa08e..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * IXP2000 MSF network device driver
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __IXPDEV_PRIV_H
-#define __IXPDEV_PRIV_H
-
-#define RX_BUF_DESC_BASE	0x00001000
-#define RX_BUF_COUNT		((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_rx_desc)))
-#define TX_BUF_DESC_BASE	0x00002000
-#define TX_BUF_COUNT		((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_tx_desc)))
-#define TX_BUF_COUNT_PER_CHAN	(TX_BUF_COUNT / 4)
-
-#define RING_RX_PENDING		((u32 *)IXP2000_SCRATCH_RING_VIRT_BASE)
-#define RING_RX_DONE		((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 4))
-#define RING_TX_PENDING		((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 8))
-#define RING_TX_DONE		((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 12))
-
-#define SCRATCH_REG(x)		((u32 *)(IXP2000_GLOBAL_REG_VIRT_BASE | 0x0800 | (x)))
-#define RING_RX_PENDING_BASE	SCRATCH_REG(0x00)
-#define RING_RX_PENDING_HEAD	SCRATCH_REG(0x04)
-#define RING_RX_PENDING_TAIL	SCRATCH_REG(0x08)
-#define RING_RX_DONE_BASE	SCRATCH_REG(0x10)
-#define RING_RX_DONE_HEAD	SCRATCH_REG(0x14)
-#define RING_RX_DONE_TAIL	SCRATCH_REG(0x18)
-#define RING_TX_PENDING_BASE	SCRATCH_REG(0x20)
-#define RING_TX_PENDING_HEAD	SCRATCH_REG(0x24)
-#define RING_TX_PENDING_TAIL	SCRATCH_REG(0x28)
-#define RING_TX_DONE_BASE	SCRATCH_REG(0x30)
-#define RING_TX_DONE_HEAD	SCRATCH_REG(0x34)
-#define RING_TX_DONE_TAIL	SCRATCH_REG(0x38)
-
-struct ixpdev_rx_desc
-{
-	u32	buf_addr;
-	u32	buf_length;
-	u32	channel;
-	u32	pkt_length;
-};
-
-struct ixpdev_tx_desc
-{
-	u32	buf_addr;
-	u32	pkt_length;
-	u32	channel;
-	u32	unused;
-};
-
-
-#endif
diff --git a/drivers/net/ethernet/xscale/ixp2000/pm3386.c b/drivers/net/ethernet/xscale/ixp2000/pm3386.c
deleted file mode 100644
index e08d3f9..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/pm3386.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Helper functions for the PM3386s on the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <asm/io.h>
-#include "pm3386.h"
-
-/*
- * Read from register 'reg' of PM3386 device 'pm'.
- */
-static u16 pm3386_reg_read(int pm, int reg)
-{
-	void *_reg;
-	u16 value;
-
-	_reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
-	if (pm == 1)
-		_reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
-
-	value = *((volatile u16 *)(_reg + (reg << 1)));
-
-//	printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value);
-
-	return value;
-}
-
-/*
- * Write to register 'reg' of PM3386 device 'pm', and perform
- * a readback from the identification register.
- */
-static void pm3386_reg_write(int pm, int reg, u16 value)
-{
-	void *_reg;
-	u16 dummy;
-
-//	printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value);
-
-	_reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
-	if (pm == 1)
-		_reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
-
-	*((volatile u16 *)(_reg + (reg << 1))) = value;
-
-	dummy = *((volatile u16 *)_reg);
-	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-/*
- * Read from port 'port' register 'reg', where the registers
- * for the different ports are 'spacing' registers apart.
- */
-static u16 pm3386_port_reg_read(int port, int _reg, int spacing)
-{
-	int reg;
-
-	reg = _reg;
-	if (port & 1)
-		reg += spacing;
-
-	return pm3386_reg_read(port >> 1, reg);
-}
-
-/*
- * Write to port 'port' register 'reg', where the registers
- * for the different ports are 'spacing' registers apart.
- */
-static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
-{
-	int reg;
-
-	reg = _reg;
-	if (port & 1)
-		reg += spacing;
-
-	pm3386_reg_write(port >> 1, reg, value);
-}
-
-int pm3386_secondary_present(void)
-{
-	return pm3386_reg_read(1, 0) == 0x3386;
-}
-
-void pm3386_reset(void)
-{
-	u8 mac[3][6];
-	int secondary;
-
-	secondary = pm3386_secondary_present();
-
-	/* Save programmed MAC addresses.  */
-	pm3386_get_mac(0, mac[0]);
-	pm3386_get_mac(1, mac[1]);
-	if (secondary)
-		pm3386_get_mac(2, mac[2]);
-
-	/* Assert analog and digital reset.  */
-	pm3386_reg_write(0, 0x002, 0x0060);
-	if (secondary)
-		pm3386_reg_write(1, 0x002, 0x0060);
-	mdelay(1);
-
-	/* Deassert analog reset.  */
-	pm3386_reg_write(0, 0x002, 0x0062);
-	if (secondary)
-		pm3386_reg_write(1, 0x002, 0x0062);
-	mdelay(10);
-
-	/* Deassert digital reset.  */
-	pm3386_reg_write(0, 0x002, 0x0063);
-	if (secondary)
-		pm3386_reg_write(1, 0x002, 0x0063);
-	mdelay(10);
-
-	/* Restore programmed MAC addresses.  */
-	pm3386_set_mac(0, mac[0]);
-	pm3386_set_mac(1, mac[1]);
-	if (secondary)
-		pm3386_set_mac(2, mac[2]);
-
-	/* Disable carrier on all ports.  */
-	pm3386_set_carrier(0, 0);
-	pm3386_set_carrier(1, 0);
-	if (secondary)
-		pm3386_set_carrier(2, 0);
-}
-
-static u16 swaph(u16 x)
-{
-	return ((x << 8) | (x >> 8)) & 0xffff;
-}
-
-int pm3386_port_count(void)
-{
-	return 2 + pm3386_secondary_present();
-}
-
-void pm3386_init_port(int port)
-{
-	int pm = port >> 1;
-
-	/*
-	 * Work around ENP2611 bootloader programming MAC address
-	 * in reverse.
-	 */
-	if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 &&
-	    (pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) {
-		u16 temp[3];
-
-		temp[0] = pm3386_port_reg_read(port, 0x308, 0x100);
-		temp[1] = pm3386_port_reg_read(port, 0x309, 0x100);
-		temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100);
-		pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2]));
-		pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1]));
-		pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0]));
-	}
-
-	/*
-	 * Initialise narrowbanding mode.  See application note 2010486
-	 * for more information.  (@@@ We also need to issue a reset
-	 * when ROOL or DOOL are detected.)
-	 */
-	pm3386_port_reg_write(port, 0x708, 0x10, 0xd055);
-	udelay(500);
-	pm3386_port_reg_write(port, 0x708, 0x10, 0x5055);
-
-	/*
-	 * SPI-3 ingress block.  Set 64 bytes SPI-3 burst size
-	 * towards SPI-3 bridge.
-	 */
-	pm3386_port_reg_write(port, 0x122, 0x20, 0x0002);
-
-	/*
-	 * Enable ingress protocol checking, and soft reset the
-	 * SPI-3 ingress block.
-	 */
-	pm3386_reg_write(pm, 0x103, 0x0003);
-	while (!(pm3386_reg_read(pm, 0x103) & 0x80))
-		;
-
-	/*
-	 * SPI-3 egress block.  Gather 12288 bytes of the current
-	 * packet in the TX fifo before initiating transmit on the
-	 * SERDES interface.  (Prevents TX underflows.)
-	 */
-	pm3386_port_reg_write(port, 0x221, 0x20, 0x0007);
-
-	/*
-	 * Enforce odd parity from the SPI-3 bridge, and soft reset
-	 * the SPI-3 egress block.
-	 */
-	pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1)));
-	while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c)
-		;
-
-	/*
-	 * EGMAC block.  Set this channels to reject long preambles,
-	 * not send or transmit PAUSE frames, enable preamble checking,
-	 * disable frame length checking, enable FCS appending, enable
-	 * TX frame padding.
-	 */
-	pm3386_port_reg_write(port, 0x302, 0x100, 0x0113);
-
-	/*
-	 * Soft reset the EGMAC block.
-	 */
-	pm3386_port_reg_write(port, 0x301, 0x100, 0x8000);
-	pm3386_port_reg_write(port, 0x301, 0x100, 0x0000);
-
-	/*
-	 * Auto-sense autonegotiation status.
-	 */
-	pm3386_port_reg_write(port, 0x306, 0x100, 0x0100);
-
-	/*
-	 * Allow reception of jumbo frames.
-	 */
-	pm3386_port_reg_write(port, 0x310, 0x100, 9018);
-
-	/*
-	 * Allow transmission of jumbo frames.
-	 */
-	pm3386_port_reg_write(port, 0x336, 0x100, 9018);
-
-	/* @@@ Should set 0x337/0x437 (RX forwarding threshold.)  */
-
-	/*
-	 * Set autonegotiation parameters to 'no PAUSE, full duplex.'
-	 */
-	pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020);
-
-	/*
-	 * Enable and restart autonegotiation.
-	 */
-	pm3386_port_reg_write(port, 0x318, 0x100, 0x0003);
-	pm3386_port_reg_write(port, 0x318, 0x100, 0x0002);
-}
-
-void pm3386_get_mac(int port, u8 *mac)
-{
-	u16 temp;
-
-	temp = pm3386_port_reg_read(port, 0x308, 0x100);
-	mac[0] = temp & 0xff;
-	mac[1] = (temp >> 8) & 0xff;
-
-	temp = pm3386_port_reg_read(port, 0x309, 0x100);
-	mac[2] = temp & 0xff;
-	mac[3] = (temp >> 8) & 0xff;
-
-	temp = pm3386_port_reg_read(port, 0x30a, 0x100);
-	mac[4] = temp & 0xff;
-	mac[5] = (temp >> 8) & 0xff;
-}
-
-void pm3386_set_mac(int port, u8 *mac)
-{
-	pm3386_port_reg_write(port, 0x308, 0x100, (mac[1] << 8) | mac[0]);
-	pm3386_port_reg_write(port, 0x309, 0x100, (mac[3] << 8) | mac[2]);
-	pm3386_port_reg_write(port, 0x30a, 0x100, (mac[5] << 8) | mac[4]);
-}
-
-static u32 pm3386_get_stat(int port, u16 base)
-{
-	u32 value;
-
-	value = pm3386_port_reg_read(port, base, 0x100);
-	value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16;
-
-	return value;
-}
-
-void pm3386_get_stats(int port, struct net_device_stats *stats)
-{
-	/*
-	 * Snapshot statistics counters.
-	 */
-	pm3386_port_reg_write(port, 0x500, 0x100, 0x0001);
-	while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001)
-		;
-
-	memset(stats, 0, sizeof(*stats));
-
-	stats->rx_packets = pm3386_get_stat(port, 0x510);
-	stats->tx_packets = pm3386_get_stat(port, 0x590);
-	stats->rx_bytes = pm3386_get_stat(port, 0x514);
-	stats->tx_bytes = pm3386_get_stat(port, 0x594);
-	/* @@@ Add other stats.  */
-}
-
-void pm3386_set_carrier(int port, int state)
-{
-	pm3386_port_reg_write(port, 0x703, 0x10, state ? 0x1001 : 0x0000);
-}
-
-int pm3386_is_link_up(int port)
-{
-	u16 temp;
-
-	temp = pm3386_port_reg_read(port, 0x31a, 0x100);
-	temp = pm3386_port_reg_read(port, 0x31a, 0x100);
-
-	return !!(temp & 0x0002);
-}
-
-void pm3386_enable_rx(int port)
-{
-	u16 temp;
-
-	temp = pm3386_port_reg_read(port, 0x303, 0x100);
-	temp |= 0x1000;
-	pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-void pm3386_disable_rx(int port)
-{
-	u16 temp;
-
-	temp = pm3386_port_reg_read(port, 0x303, 0x100);
-	temp &= 0xefff;
-	pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-void pm3386_enable_tx(int port)
-{
-	u16 temp;
-
-	temp = pm3386_port_reg_read(port, 0x303, 0x100);
-	temp |= 0x4000;
-	pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-void pm3386_disable_tx(int port)
-{
-	u16 temp;
-
-	temp = pm3386_port_reg_read(port, 0x303, 0x100);
-	temp &= 0xbfff;
-	pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/xscale/ixp2000/pm3386.h b/drivers/net/ethernet/xscale/ixp2000/pm3386.h
deleted file mode 100644
index cc4183d..0000000
--- a/drivers/net/ethernet/xscale/ixp2000/pm3386.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Helper functions for the PM3386s on the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __PM3386_H
-#define __PM3386_H
-
-void pm3386_reset(void);
-int pm3386_port_count(void);
-void pm3386_init_port(int port);
-void pm3386_get_mac(int port, u8 *mac);
-void pm3386_set_mac(int port, u8 *mac);
-void pm3386_get_stats(int port, struct net_device_stats *stats);
-void pm3386_set_carrier(int port, int state);
-int pm3386_is_link_up(int port);
-void pm3386_enable_rx(int port);
-void pm3386_disable_rx(int port);
-void pm3386_enable_tx(int port);
-void pm3386_disable_tx(int port);
-
-
-#endif