diff options
author | Giuseppe CAVALLARO <peppe.cavallaro@st.com> | 2014-11-18 08:47:01 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2014-11-19 20:04:58 (GMT) |
commit | 732fdf0e5253e9d3687d332630e8468a701bebb2 (patch) | |
tree | e194b86f7a7efd43827bc72f69ede8338cbcd608 /drivers | |
parent | 915c199fc8cde9f9a5af19c1ea8c7c3c075d60e1 (diff) | |
download | linux-732fdf0e5253e9d3687d332630e8468a701bebb2.tar.xz |
stmmac: review driver when run kernel-doc
When run ./scripts/kernel-doc several warnings are reported
so this patch fix them.
Also it reviews many comments and adds new ones.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c | 15 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 151 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 43 |
4 files changed, 142 insertions, 69 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c index ea40692..0e13775 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c @@ -1,4 +1,4 @@ -/** +/* * dwmac-sti.c - STMicroelectronics DWMAC Specific Glue layer * * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited @@ -37,9 +37,8 @@ #define IS_PHY_IF_MODE_GBIT(iface) (IS_PHY_IF_MODE_RGMII(iface) || \ iface == PHY_INTERFACE_MODE_GMII) -/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families) */ - -/** +/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families) + * * Below table summarizes the clock requirement and clock sources for * supported phy interface modes with link speeds. * ________________________________________________ @@ -78,9 +77,7 @@ #define STIH4XX_ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7) #define STIH4XX_ETH_SEL_TXCLK_NOT_CLK125 BIT(6) -/* STiD127 register definitions */ - -/** +/* STiD127 register definitions *----------------------- * src |BIT(6)| BIT(7)| *----------------------- @@ -106,13 +103,13 @@ #define EN_MASK GENMASK(1, 1) #define EN BIT(1) -/** +/* * 3 bits [4:2] * 000-GMII/MII * 001-RGMII * 010-SGMII * 100-RMII -*/ + */ #define MII_PHY_SEL_MASK GENMASK(4, 2) #define ETH_PHY_SEL_RMII BIT(4) #define ETH_PHY_SEL_SGMII BIT(3) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c index a26bda2..c5ea9ab 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c @@ -1,4 +1,4 @@ -/** +/* * dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer * * Copyright (C) 2013 Chen-Yu Tsai diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 0f1c146..118a427 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -125,8 +125,8 @@ static void stmmac_exit_fs(void); /** * stmmac_verify_args - verify the driver parameters. - * Description: it verifies if some wrong parameter is passed to the driver. - * Note that wrong parameters are replaced with the default values. + * Description: it checks the driver parameters and set a default in case of + * errors. */ static void stmmac_verify_args(void) { @@ -204,7 +204,7 @@ static inline u32 stmmac_tx_avail(struct stmmac_priv *priv) } /** - * stmmac_hw_fix_mac_speed: callback for speed selection + * stmmac_hw_fix_mac_speed - callback for speed selection * @priv: driver private structure * Description: on some platforms (e.g. ST), some HW system configuraton * registers have to be set according to the link speed negotiated. @@ -218,9 +218,10 @@ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv) } /** - * stmmac_enable_eee_mode: Check and enter in LPI mode + * stmmac_enable_eee_mode - check and enter in LPI mode * @priv: driver private structure - * Description: this function is to verify and enter in LPI mode for EEE. + * Description: this function is to verify and enter in LPI mode in case of + * EEE. */ static void stmmac_enable_eee_mode(struct stmmac_priv *priv) { @@ -231,7 +232,7 @@ static void stmmac_enable_eee_mode(struct stmmac_priv *priv) } /** - * stmmac_disable_eee_mode: disable/exit from EEE + * stmmac_disable_eee_mode - disable and exit from LPI mode * @priv: driver private structure * Description: this function is to exit and disable EEE in case of * LPI state is true. This is called by the xmit. @@ -244,7 +245,7 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv) } /** - * stmmac_eee_ctrl_timer: EEE TX SW timer. + * stmmac_eee_ctrl_timer - EEE TX SW timer. * @arg : data hook * Description: * if there is no data transfer and if we are not in LPI state, @@ -259,13 +260,12 @@ static void stmmac_eee_ctrl_timer(unsigned long arg) } /** - * stmmac_eee_init: init EEE + * stmmac_eee_init - init EEE * @priv: driver private structure * Description: - * If the EEE support has been enabled while configuring the driver, - * if the GMAC actually supports the EEE (from the HW cap reg) and the - * phy can also manage EEE, so enable the LPI state and start the timer - * to verify if the tx path can enter in LPI state. + * if the GMAC supports the EEE (from the HW cap reg) and the phy device + * can also manage EEE, this function enable the LPI state and start related + * timer. */ bool stmmac_eee_init(struct stmmac_priv *priv) { @@ -332,7 +332,7 @@ out: return ret; } -/* stmmac_get_tx_hwtstamp: get HW TX timestamps +/* stmmac_get_tx_hwtstamp - get HW TX timestamps * @priv: driver private structure * @entry : descriptor index to be used. * @skb : the socket buffer @@ -374,7 +374,7 @@ static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv, return; } -/* stmmac_get_rx_hwtstamp: get HW RX timestamps +/* stmmac_get_rx_hwtstamp - get HW RX timestamps * @priv: driver private structure * @entry : descriptor index to be used. * @skb : the socket buffer @@ -630,11 +630,11 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) } /** - * stmmac_init_ptp: init PTP + * stmmac_init_ptp - init PTP * @priv: driver private structure - * Description: this is to verify if the HW supports the PTPv1 or v2. + * Description: this is to verify if the HW supports the PTPv1 or PTPv2. * This is done by looking at the HW cap. register. - * Also it registers the ptp driver. + * This function also registers the ptp driver. */ static int stmmac_init_ptp(struct stmmac_priv *priv) { @@ -676,9 +676,13 @@ static void stmmac_release_ptp(struct stmmac_priv *priv) } /** - * stmmac_adjust_link + * stmmac_adjust_link - adjusts the link parameters * @dev: net device structure - * Description: it adjusts the link parameters. + * Description: this is the helper called by the physical abstraction layer + * drivers to communicate the phy link status. According the speed and duplex + * this driver can invoke registered glue-logic as well. + * It also invoke the eee initialization because it could happen when switch + * on different networks (that are eee capable). */ static void stmmac_adjust_link(struct net_device *dev) { @@ -768,7 +772,7 @@ static void stmmac_adjust_link(struct net_device *dev) } /** - * stmmac_check_pcs_mode: verify if RGMII/SGMII is supported + * stmmac_check_pcs_mode - verify if RGMII/SGMII is supported * @priv: driver private structure * Description: this is to verify if the HW supports the PCS. * Physical Coding Sublayer (PCS) interface that can be used when the MAC is @@ -857,7 +861,7 @@ static int stmmac_init_phy(struct net_device *dev) } /** - * stmmac_display_ring: display ring + * stmmac_display_ring - display ring * @head: pointer to the head of the ring passed. * @size: size of the ring. * @extend_desc: to verify if extended descriptors are used. @@ -925,7 +929,7 @@ static int stmmac_set_bfsize(int mtu, int bufsize) } /** - * stmmac_clear_descriptors: clear descriptors + * stmmac_clear_descriptors - clear descriptors * @priv: driver private structure * Description: this function is called to clear the tx and rx descriptors * in case of both basic and extended descriptors are used. @@ -957,6 +961,15 @@ static void stmmac_clear_descriptors(struct stmmac_priv *priv) (i == txsize - 1)); } +/** + * stmmac_init_rx_buffers - init the RX descriptor buffer. + * @priv: driver private structure + * @p: descriptor pointer + * @i: descriptor index + * @flags: gfp flag. + * Description: this function is called to allocate a receive buffer, perform + * the DMA mapping and init the descriptor. + */ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p, int i, gfp_t flags) { @@ -1001,7 +1014,8 @@ static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i) /** * init_dma_desc_rings - init the RX/TX descriptor rings * @dev: net device structure - * Description: this function initializes the DMA RX/TX descriptors + * @flags: gfp flag. + * Description: this function initializes the DMA RX/TX descriptors * and allocates the socket buffers. It suppors the chained and ring * modes. */ @@ -1138,6 +1152,14 @@ static void dma_free_tx_skbufs(struct stmmac_priv *priv) } } +/** + * alloc_dma_desc_resources - alloc TX/RX resources. + * @priv: private structure + * Description: according to which descriptor can be used (extend or basic) + * this function allocates the resources for TX and RX paths. In case of + * reception, for example, it pre-allocated the RX socket buffer in order to + * allow zero-copy mechanism. + */ static int alloc_dma_desc_resources(struct stmmac_priv *priv) { unsigned int txsize = priv->dma_tx_size; @@ -1249,8 +1271,8 @@ static void free_dma_desc_resources(struct stmmac_priv *priv) /** * stmmac_dma_operation_mode - HW DMA operation mode * @priv: driver private structure - * Description: it sets the DMA operation mode: tx/rx DMA thresholds - * or Store-And-Forward capability. + * Description: it is used for configuring the DMA operation mode register in + * order to program the tx/rx DMA thresholds or Store-And-Forward mode. */ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) { @@ -1271,9 +1293,9 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) } /** - * stmmac_tx_clean: + * stmmac_tx_clean - to manage the transmission completion * @priv: driver private structure - * Description: it reclaims resources after transmission completes. + * Description: it reclaims the transmit resources after transmission completes. */ static void stmmac_tx_clean(struct stmmac_priv *priv) { @@ -1372,10 +1394,10 @@ static inline void stmmac_disable_dma_irq(struct stmmac_priv *priv) } /** - * stmmac_tx_err: irq tx error mng function + * stmmac_tx_err - to manage the tx error * @priv: driver private structure * Description: it cleans the descriptors and restarts the transmission - * in case of errors. + * in case of transmission errors. */ static void stmmac_tx_err(struct stmmac_priv *priv) { @@ -1403,12 +1425,11 @@ static void stmmac_tx_err(struct stmmac_priv *priv) } /** - * stmmac_dma_interrupt: DMA ISR + * stmmac_dma_interrupt - DMA ISR * @priv: driver private structure * Description: this is the DMA ISR. It is called by the main ISR. - * It calls the dwmac dma routine to understand which type of interrupt - * happened. In case of there is a Normal interrupt and either TX or RX - * interrupt happened so the NAPI is scheduled. + * It calls the dwmac dma routine and schedule poll method in case of some + * work can be done. */ static void stmmac_dma_interrupt(struct stmmac_priv *priv) { @@ -1451,6 +1472,12 @@ static void stmmac_mmc_setup(struct stmmac_priv *priv) pr_info(" No MAC Management Counters available\n"); } +/** + * stmmac_get_synopsys_id - return the SYINID. + * @priv: driver private structure + * Description: this simple function is to decode and return the SYINID + * starting from the HW core register. + */ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) { u32 hwid = priv->hw->synopsys_uid; @@ -1469,11 +1496,11 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) } /** - * stmmac_selec_desc_mode: to select among: normal/alternate/extend descriptors + * stmmac_selec_desc_mode - to select among: normal/alternate/extend descriptors * @priv: driver private structure * Description: select the Enhanced/Alternate or Normal descriptors. - * In case of Enhanced/Alternate, it looks at the extended descriptors are - * supported by the HW cap. register. + * In case of Enhanced/Alternate, it checks if the extended descriptors are + * supported by the HW capability register. */ static void stmmac_selec_desc_mode(struct stmmac_priv *priv) { @@ -1495,7 +1522,7 @@ static void stmmac_selec_desc_mode(struct stmmac_priv *priv) } /** - * stmmac_get_hw_features: get MAC capabilities from the HW cap. register. + * stmmac_get_hw_features - get MAC capabilities from the HW cap. register. * @priv: driver private structure * Description: * new GMAC chip generations have a new register to indicate the @@ -1553,7 +1580,7 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv) } /** - * stmmac_check_ether_addr: check if the MAC addr is valid + * stmmac_check_ether_addr - check if the MAC addr is valid * @priv: driver private structure * Description: * it is to verify if the MAC address is valid, in case of failures it @@ -1572,7 +1599,7 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv) } /** - * stmmac_init_dma_engine: DMA init. + * stmmac_init_dma_engine - DMA init. * @priv: driver private structure * Description: * It inits the DMA invoking the specific MAC/GMAC callback. @@ -1601,7 +1628,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) } /** - * stmmac_tx_timer: mitigation sw timer for tx. + * stmmac_tx_timer - mitigation sw timer for tx. * @data: data pointer * Description: * This is the timer handler to directly invoke the stmmac_tx_clean. @@ -1614,7 +1641,7 @@ static void stmmac_tx_timer(unsigned long data) } /** - * stmmac_init_tx_coalesce: init tx mitigation options. + * stmmac_init_tx_coalesce - init tx mitigation options. * @priv: driver private structure * Description: * This inits the transmit coalesce parameters: i.e. timer rate, @@ -1633,10 +1660,13 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv) } /** - * stmmac_hw_setup: setup mac in a usable state. + * stmmac_hw_setup - setup mac in a usable state. * @dev : pointer to the device structure. * Description: - * This function sets up the ip in a usable state. + * this is the main function to setup the HW in a usable state because the + * dma engine is reset, the core registers are configured (e.g. AXI, + * Checksum features, timers). The DMA is ready to start receiving and + * transmitting. * Return value: * 0 on success and an appropriate (-)ve integer as defined in errno.h * file on failure. @@ -1874,7 +1904,7 @@ static int stmmac_release(struct net_device *dev) } /** - * stmmac_xmit: Tx entry point of the driver + * stmmac_xmit - Tx entry point of the driver * @skb : the socket buffer * @dev : device pointer * Description : this is the tx entry point of the driver. @@ -2049,7 +2079,7 @@ static void stmmac_rx_vlan(struct net_device *dev, struct sk_buff *skb) /** - * stmmac_rx_refill: refill used skb preallocated buffers + * stmmac_rx_refill - refill used skb preallocated buffers * @priv: driver private structure * Description : this is to reallocate the skb for the reception process * that is based on zero-copy. @@ -2100,7 +2130,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv) } /** - * stmmac_rx_refill: refill used skb preallocated buffers + * stmmac_rx - manage the receive process * @priv: driver private structure * @limit: napi bugget. * Description : this the function called by the napi poll method. @@ -2369,8 +2399,11 @@ static int stmmac_set_features(struct net_device *netdev, * @irq: interrupt number. * @dev_id: to pass the net device pointer. * Description: this is the main driver interrupt service routine. - * It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI - * interrupts. + * It can call: + * o DMA service routine (to manage incoming frame reception and transmission + * status) + * o Core interrupts to manage: remote wake-up, management counter, LPI + * interrupts. */ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) { @@ -2657,11 +2690,10 @@ static const struct net_device_ops stmmac_netdev_ops = { /** * stmmac_hw_init - Init the MAC device * @priv: driver private structure - * Description: this function detects which MAC device - * (GMAC/MAC10-100) has to attached, checks the HW capability - * (if supported) and sets the driver's features (for example - * to use the ring or chaine mode or support the normal/enh - * descriptor structure). + * Description: this function is to configure the MAC device according to + * some platform parameters or the HW capability register. It prepares the + * driver to use either ring or chain modes and to setup either enhanced or + * normal descriptors. */ static int stmmac_hw_init(struct stmmac_priv *priv) { @@ -2917,6 +2949,13 @@ int stmmac_dvr_remove(struct net_device *ndev) } EXPORT_SYMBOL_GPL(stmmac_dvr_remove); +/** + * stmmac_suspend - suspend callback + * @ndev: net device pointer + * Description: this is the function to suspend the device and it is called + * by the platform driver to stop the network queue, release the resources, + * program the PMT register (for WoL), clean and release driver resources. + */ int stmmac_suspend(struct net_device *ndev) { struct stmmac_priv *priv = netdev_priv(ndev); @@ -2960,6 +2999,12 @@ int stmmac_suspend(struct net_device *ndev) } EXPORT_SYMBOL_GPL(stmmac_suspend); +/** + * stmmac_resume - resume callback + * @ndev: net device pointer + * Description: when resume this function is invoked to setup the DMA and CORE + * in a usable state. + */ int stmmac_resume(struct net_device *ndev) { struct stmmac_priv *priv = netdev_priv(ndev); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index e22a960..15814b7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -51,7 +51,11 @@ MODULE_DEVICE_TABLE(of, stmmac_dt_ids); #ifdef CONFIG_OF -/* This function validates the number of Multicast filtering bins specified +/** + * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins + * @mcast_bins: Multicast filtering bins + * Description: + * this function validates the number of Multicast filtering bins specified * by the configuration through the device tree. The Synopsys GMAC supports * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds @@ -77,7 +81,11 @@ static int dwmac1000_validate_mcast_bins(int mcast_bins) return x; } -/* This function validates the number of Unicast address entries supported +/** + * dwmac1000_validate_ucast_entries - validate the Unicast address entries + * @ucast_entries: number of Unicast address entries + * Description: + * This function validates the number of Unicast address entries supported * by a particular Synopsys 10/100/1000 controller. The Synopsys controller * supports 1, 32, 64, or 128 Unicast filter entries for it's Unicast filter * logic. This function validates a valid, supported configuration is @@ -103,6 +111,15 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) return x; } +/** + * stmmac_probe_config_dt - parse device-tree driver parameters + * @pdev: platform_device structure + * @plat: driver data platform structure + * @mac: MAC address to use + * Description: + * this function is to read the driver parameters from device-tree and + * set some private fields that will be used by the main at runtime. + */ static int stmmac_probe_config_dt(struct platform_device *pdev, struct plat_stmmacenet_data *plat, const char **mac) @@ -242,11 +259,11 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, #endif /* CONFIG_OF */ /** - * stmmac_pltfr_probe + * stmmac_pltfr_probe - platform driver probe. * @pdev: platform device pointer - * Description: platform_device probe function. It allocates - * the necessary resources and invokes the main to init - * the net device, register the mdio bus etc. + * Description: platform_device probe function. It is to allocate + * the necessary platform resources, invoke custom helper (if required) and + * invoke the main probe function. */ static int stmmac_pltfr_probe(struct platform_device *pdev) { @@ -363,6 +380,13 @@ static int stmmac_pltfr_remove(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP +/** + * stmmac_pltfr_suspend + * @dev: device pointer + * Description: this function is invoked when suspend the driver and it direcly + * call the main suspend function and then, if required, on some platform, it + * can call an exit helper. + */ static int stmmac_pltfr_suspend(struct device *dev) { int ret; @@ -377,6 +401,13 @@ static int stmmac_pltfr_suspend(struct device *dev) return ret; } +/** + * stmmac_pltfr_resume + * @dev: device pointer + * Description: this function is invoked when resume the driver before calling + * the main resume function, on some platforms, it can call own init helper + * if required. + */ static int stmmac_pltfr_resume(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); |