diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-07-25 03:56:18 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-07-25 03:56:18 (GMT) |
commit | 8405b044e5238afebd7248d927c1d261d2239767 (patch) | |
tree | 56c6a3c1a4542ead63b4abdd9fe6629d849402d5 /drivers | |
parent | ee05eff6f79c25617e5b7d7677b8f79d26abbe37 (diff) | |
parent | 133de1211982bd2ba9ab401f7a73d25d052ccd61 (diff) | |
download | linux-8405b044e5238afebd7248d927c1d261d2239767.tar.xz |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] s5pv210: make needlessly global symbols static
[CPUFREQ] exynos4210: make needlessly global symbols static
[CPUFREQ] S3C6410: Add some lower frequencies for 800MHz base clock operation
[CPUFREQ] S5PV210: Add reboot notifier to prevent system hang
[CPUFREQ] S5PV210: Adjust udelay prior to voltage scaling down
[CPUFREQ] S5PV210: Lock a mutex while changing the cpu frequency
[CPUFREQ] S5PV210: Add pm_notifier to prevent system unstable
[CPUFREQ] S5PV210: Add arm/int voltage control support
[CPUFREQ] S5PV210: Add additional symantics for "relation" in cpufreq with pm
[CPUFREQ] S3C64xx: Notify transition complete as soon as frequency changed
[CPUFREQ] S3C6410: Support 800MHz operation in cpufreq
[CPUFREQ] s5pv210-cpufreq.c: Add missing clk_put
[CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq
[CPUFREQ] Remove some vi noise that escaped into the Makefile.
[CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/
[CPUFREQ/S3C64xx] Move S3C64xx CPUfreq driver into drivers/cpufreq
[CPUFREQ] Handle CPUs with different capabilities in acpi-cpufreq
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/cpufreq/Kconfig | 5 | ||||
-rw-r--r-- | drivers/cpufreq/Kconfig.arm | 32 | ||||
-rw-r--r-- | drivers/cpufreq/Makefile | 8 | ||||
-rw-r--r-- | drivers/cpufreq/acpi-cpufreq.c | 2 | ||||
-rw-r--r-- | drivers/cpufreq/exynos4210-cpufreq.c | 568 | ||||
-rw-r--r-- | drivers/cpufreq/s3c64xx-cpufreq.c | 273 | ||||
-rw-r--r-- | drivers/cpufreq/s5pv210-cpufreq.c | 649 |
7 files changed, 1533 insertions, 4 deletions
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 9fb8485..e898215 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -184,5 +184,10 @@ depends on X86 source "drivers/cpufreq/Kconfig.x86" endmenu +menu "ARM CPU frequency scaling drivers" +depends on ARM +source "drivers/cpufreq/Kconfig.arm" +endmenu + endif endmenu diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm new file mode 100644 index 0000000..72a0044 --- /dev/null +++ b/drivers/cpufreq/Kconfig.arm @@ -0,0 +1,32 @@ +# +# ARM CPU Frequency scaling drivers +# + +config ARM_S3C64XX_CPUFREQ + bool "Samsung S3C64XX" + depends on CPU_S3C6410 + default y + help + This adds the CPUFreq driver for Samsung S3C6410 SoC. + + If in doubt, say N. + +config ARM_S5PV210_CPUFREQ + bool "Samsung S5PV210 and S5PC110" + depends on CPU_S5PV210 + default y + help + This adds the CPUFreq driver for Samsung S5PV210 and + S5PC110 SoCs. + + If in doubt, say N. + +config ARM_EXYNOS4210_CPUFREQ + bool "Samsung EXYNOS4210" + depends on CPU_EXYNOS4210 + default y + help + This adds the CPUFreq driver for Samsung EXYNOS4210 + SoC (S5PV310 or S5PC210). + + If in doubt, say N. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index e2fc2d2..ab75e57 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o # CPUfreq cross-arch helpers obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o -##################################################################################d +################################################################################## # x86 drivers. # Link order matters. K8 is preferred to ACPI because of firmware bugs in early # K8 systems. ACPI is preferred to all other hardware-specific drivers. @@ -37,7 +37,9 @@ obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o -##################################################################################d - +################################################################################## # ARM SoC drivers obj-$(CONFIG_UX500_SOC_DB8500) += db8500-cpufreq.o +obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o +obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o +obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 596d5dd..56c6c6b 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -655,7 +655,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) acpi_processor_notify_smm(THIS_MODULE); /* Check for APERF/MPERF support in hardware */ - if (cpu_has(c, X86_FEATURE_APERFMPERF)) + if (boot_cpu_has(X86_FEATURE_APERFMPERF)) acpi_cpufreq_driver.getavg = cpufreq_get_measured_perf; pr_debug("CPU%u - ACPI performance management activated.\n", cpu); diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c new file mode 100644 index 0000000..b7c3a84 --- /dev/null +++ b/drivers/cpufreq/exynos4210-cpufreq.c @@ -0,0 +1,568 @@ +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/cpufreq.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/regs-mem.h> + +#include <plat/clock.h> +#include <plat/pm.h> + +static struct clk *cpu_clk; +static struct clk *moutcore; +static struct clk *mout_mpll; +static struct clk *mout_apll; + +static struct regulator *arm_regulator; +static struct regulator *int_regulator; + +static struct cpufreq_freqs freqs; +static unsigned int memtype; + +enum exynos4_memory_type { + DDR2 = 4, + LPDDR2, + DDR3, +}; + +enum cpufreq_level_index { + L0, L1, L2, L3, CPUFREQ_LEVEL_END, +}; + +static struct cpufreq_frequency_table exynos4_freq_table[] = { + {L0, 1000*1000}, + {L1, 800*1000}, + {L2, 400*1000}, + {L3, 100*1000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = { + /* + * Clock divider value for following + * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH, + * DIVATB, DIVPCLK_DBG, DIVAPLL } + */ + + /* ARM L0: 1000MHz */ + { 0, 3, 7, 3, 3, 0, 1 }, + + /* ARM L1: 800MHz */ + { 0, 3, 7, 3, 3, 0, 1 }, + + /* ARM L2: 400MHz */ + { 0, 1, 3, 1, 3, 0, 1 }, + + /* ARM L3: 100MHz */ + { 0, 0, 1, 0, 3, 1, 1 }, +}; + +static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = { + /* + * Clock divider value for following + * { DIVCOPY, DIVHPM } + */ + + /* ARM L0: 1000MHz */ + { 3, 0 }, + + /* ARM L1: 800MHz */ + { 3, 0 }, + + /* ARM L2: 400MHz */ + { 3, 0 }, + + /* ARM L3: 100MHz */ + { 3, 0 }, +}; + +static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = { + /* + * Clock divider value for following + * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD + * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } + */ + + /* DMC L0: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L1: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L2: 266.7MHz */ + { 7, 1, 1, 2, 1, 1, 3, 1 }, + + /* DMC L3: 200MHz */ + { 7, 1, 1, 3, 1, 1, 3, 1 }, +}; + +static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = { + /* + * Clock divider value for following + * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } + */ + + /* ACLK200 L0: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L1: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L2: 160MHz */ + { 4, 7, 5, 7, 1 }, + + /* ACLK200 L3: 133.3MHz */ + { 5, 7, 7, 7, 1 }, +}; + +static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = { + /* + * Clock divider value for following + * { DIVGDL/R, DIVGPL/R } + */ + + /* ACLK_GDL/R L0: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L1: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L2: 160MHz */ + { 4, 1 }, + + /* ACLK_GDL/R L3: 133.3MHz */ + { 5, 1 }, +}; + +struct cpufreq_voltage_table { + unsigned int index; /* any */ + unsigned int arm_volt; /* uV */ + unsigned int int_volt; +}; + +static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END] = { + { + .index = L0, + .arm_volt = 1200000, + .int_volt = 1100000, + }, { + .index = L1, + .arm_volt = 1100000, + .int_volt = 1100000, + }, { + .index = L2, + .arm_volt = 1000000, + .int_volt = 1000000, + }, { + .index = L3, + .arm_volt = 900000, + .int_volt = 1000000, + }, +}; + +static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = { + /* APLL FOUT L0: 1000MHz */ + ((250 << 16) | (6 << 8) | 1), + + /* APLL FOUT L1: 800MHz */ + ((200 << 16) | (6 << 8) | 1), + + /* APLL FOUT L2 : 400MHz */ + ((200 << 16) | (6 << 8) | 2), + + /* APLL FOUT L3: 100MHz */ + ((200 << 16) | (6 << 8) | 4), +}; + +static int exynos4_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, exynos4_freq_table); +} + +static unsigned int exynos4_getspeed(unsigned int cpu) +{ + return clk_get_rate(cpu_clk) / 1000; +} + +static void exynos4_set_clkdiv(unsigned int div_index) +{ + unsigned int tmp; + + /* Change Divider - CPU0 */ + + tmp = __raw_readl(S5P_CLKDIV_CPU); + + tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK | S5P_CLKDIV_CPU0_COREM0_MASK | + S5P_CLKDIV_CPU0_COREM1_MASK | S5P_CLKDIV_CPU0_PERIPH_MASK | + S5P_CLKDIV_CPU0_ATB_MASK | S5P_CLKDIV_CPU0_PCLKDBG_MASK | + S5P_CLKDIV_CPU0_APLL_MASK); + + tmp |= ((clkdiv_cpu0[div_index][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) | + (clkdiv_cpu0[div_index][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) | + (clkdiv_cpu0[div_index][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) | + (clkdiv_cpu0[div_index][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) | + (clkdiv_cpu0[div_index][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) | + (clkdiv_cpu0[div_index][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) | + (clkdiv_cpu0[div_index][6] << S5P_CLKDIV_CPU0_APLL_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_CPU); + + do { + tmp = __raw_readl(S5P_CLKDIV_STATCPU); + } while (tmp & 0x1111111); + + /* Change Divider - CPU1 */ + + tmp = __raw_readl(S5P_CLKDIV_CPU1); + + tmp &= ~((0x7 << 4) | 0x7); + + tmp |= ((clkdiv_cpu1[div_index][0] << 4) | + (clkdiv_cpu1[div_index][1] << 0)); + + __raw_writel(tmp, S5P_CLKDIV_CPU1); + + do { + tmp = __raw_readl(S5P_CLKDIV_STATCPU1); + } while (tmp & 0x11); + + /* Change Divider - DMC0 */ + + tmp = __raw_readl(S5P_CLKDIV_DMC0); + + tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK | + S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK | + S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK | + S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK); + + tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) | + (clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) | + (clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) | + (clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) | + (clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) | + (clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) | + (clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) | + (clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_DMC0); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0); + } while (tmp & 0x11111111); + + /* Change Divider - TOP */ + + tmp = __raw_readl(S5P_CLKDIV_TOP); + + tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK | + S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK | + S5P_CLKDIV_TOP_ONENAND_MASK); + + tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) | + (clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) | + (clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) | + (clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) | + (clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_TOP); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_TOP); + } while (tmp & 0x11111); + + /* Change Divider - LEFTBUS */ + + tmp = __raw_readl(S5P_CLKDIV_LEFTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | + (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_LEFTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS); + } while (tmp & 0x11); + + /* Change Divider - RIGHTBUS */ + + tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | + (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS); + } while (tmp & 0x11); +} + +static void exynos4_set_apll(unsigned int index) +{ + unsigned int tmp; + + /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + tmp = (__raw_readl(S5P_CLKMUX_STATCPU) + >> S5P_CLKSRC_CPU_MUXCORE_SHIFT); + tmp &= 0x7; + } while (tmp != 0x2); + + /* 2. Set APLL Lock time */ + __raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK); + + /* 3. Change PLL PMS values */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); + tmp |= exynos4_apll_pms_table[index]; + __raw_writel(tmp, S5P_APLL_CON0); + + /* 4. wait_lock_time */ + do { + tmp = __raw_readl(S5P_APLL_CON0); + } while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT))); + + /* 5. MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + tmp = __raw_readl(S5P_CLKMUX_STATCPU); + tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); +} + +static void exynos4_set_frequency(unsigned int old_index, unsigned int new_index) +{ + unsigned int tmp; + + if (old_index > new_index) { + /* The frequency changing to L0 needs to change apll */ + if (freqs.new == exynos4_freq_table[L0].frequency) { + /* 1. Change the system clock divider values */ + exynos4_set_clkdiv(new_index); + + /* 2. Change the apll m,p,s value */ + exynos4_set_apll(new_index); + } else { + /* 1. Change the system clock divider values */ + exynos4_set_clkdiv(new_index); + + /* 2. Change just s value in apll m,p,s value */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~(0x7 << 0); + tmp |= (exynos4_apll_pms_table[new_index] & 0x7); + __raw_writel(tmp, S5P_APLL_CON0); + } + } + + else if (old_index < new_index) { + /* The frequency changing from L0 needs to change apll */ + if (freqs.old == exynos4_freq_table[L0].frequency) { + /* 1. Change the apll m,p,s value */ + exynos4_set_apll(new_index); + + /* 2. Change the system clock divider values */ + exynos4_set_clkdiv(new_index); + } else { + /* 1. Change just s value in apll m,p,s value */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~(0x7 << 0); + tmp |= (exynos4_apll_pms_table[new_index] & 0x7); + __raw_writel(tmp, S5P_APLL_CON0); + + /* 2. Change the system clock divider values */ + exynos4_set_clkdiv(new_index); + } + } +} + +static int exynos4_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int index, old_index; + unsigned int arm_volt, int_volt; + + freqs.old = exynos4_getspeed(policy->cpu); + + if (cpufreq_frequency_table_target(policy, exynos4_freq_table, + freqs.old, relation, &old_index)) + return -EINVAL; + + if (cpufreq_frequency_table_target(policy, exynos4_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + freqs.new = exynos4_freq_table[index].frequency; + freqs.cpu = policy->cpu; + + if (freqs.new == freqs.old) + return 0; + + /* get the voltage value */ + arm_volt = exynos4_volt_table[index].arm_volt; + int_volt = exynos4_volt_table[index].int_volt; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* control regulator */ + if (freqs.new > freqs.old) { + /* Voltage up */ + regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + regulator_set_voltage(int_regulator, int_volt, int_volt); + } + + /* Clock Configuration Procedure */ + exynos4_set_frequency(old_index, index); + + /* control regulator */ + if (freqs.new < freqs.old) { + /* Voltage down */ + regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + regulator_set_voltage(int_regulator, int_volt, int_volt); + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +#ifdef CONFIG_PM +static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy) +{ + return 0; +} + +static int exynos4_cpufreq_resume(struct cpufreq_policy *policy) +{ + return 0; +} +#endif + +static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu); + + cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu); + + /* set the transition latency value */ + policy->cpuinfo.transition_latency = 100000; + + /* + * EXYNOS4 multi-core processors has 2 cores + * that the frequency cannot be set independently. + * Each cpu is bound to the same speed. + * So the affected cpu is all of the cpus. + */ + cpumask_setall(policy->cpus); + + return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table); +} + +static struct cpufreq_driver exynos4_driver = { + .flags = CPUFREQ_STICKY, + .verify = exynos4_verify_speed, + .target = exynos4_target, + .get = exynos4_getspeed, + .init = exynos4_cpufreq_cpu_init, + .name = "exynos4_cpufreq", +#ifdef CONFIG_PM + .suspend = exynos4_cpufreq_suspend, + .resume = exynos4_cpufreq_resume, +#endif +}; + +static int __init exynos4_cpufreq_init(void) +{ + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + moutcore = clk_get(NULL, "moutcore"); + if (IS_ERR(moutcore)) + goto out; + + mout_mpll = clk_get(NULL, "mout_mpll"); + if (IS_ERR(mout_mpll)) + goto out; + + mout_apll = clk_get(NULL, "mout_apll"); + if (IS_ERR(mout_apll)) + goto out; + + arm_regulator = regulator_get(NULL, "vdd_arm"); + if (IS_ERR(arm_regulator)) { + printk(KERN_ERR "failed to get resource %s\n", "vdd_arm"); + goto out; + } + + int_regulator = regulator_get(NULL, "vdd_int"); + if (IS_ERR(int_regulator)) { + printk(KERN_ERR "failed to get resource %s\n", "vdd_int"); + goto out; + } + + /* + * Check DRAM type. + * Because DVFS level is different according to DRAM type. + */ + memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET); + memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT); + memtype &= S5P_DMC0_MEMTYPE_MASK; + + if ((memtype < DDR2) && (memtype > DDR3)) { + printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype); + goto out; + } else { + printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype); + } + + return cpufreq_register_driver(&exynos4_driver); + +out: + if (!IS_ERR(cpu_clk)) + clk_put(cpu_clk); + + if (!IS_ERR(moutcore)) + clk_put(moutcore); + + if (!IS_ERR(mout_mpll)) + clk_put(mout_mpll); + + if (!IS_ERR(mout_apll)) + clk_put(mout_apll); + + if (!IS_ERR(arm_regulator)) + regulator_put(arm_regulator); + + if (!IS_ERR(int_regulator)) + regulator_put(int_regulator); + + printk(KERN_ERR "%s: failed initialization\n", __func__); + + return -EINVAL; +} +late_initcall(exynos4_cpufreq_init); diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c new file mode 100644 index 0000000..b8d1d20 --- /dev/null +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -0,0 +1,273 @@ +/* + * Copyright 2009 Wolfson Microelectronics plc + * + * S3C64xx CPUfreq Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> + +static struct clk *armclk; +static struct regulator *vddarm; +static unsigned long regulator_latency; + +#ifdef CONFIG_CPU_S3C6410 +struct s3c64xx_dvfs { + unsigned int vddarm_min; + unsigned int vddarm_max; +}; + +static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { + [0] = { 1000000, 1150000 }, + [1] = { 1050000, 1150000 }, + [2] = { 1100000, 1150000 }, + [3] = { 1200000, 1350000 }, + [4] = { 1300000, 1350000 }, +}; + +static struct cpufreq_frequency_table s3c64xx_freq_table[] = { + { 0, 66000 }, + { 0, 100000 }, + { 0, 133000 }, + { 1, 200000 }, + { 1, 222000 }, + { 1, 266000 }, + { 2, 333000 }, + { 2, 400000 }, + { 2, 532000 }, + { 2, 533000 }, + { 3, 667000 }, + { 4, 800000 }, + { 0, CPUFREQ_TABLE_END }, +}; +#endif + +static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table); +} + +static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu) +{ + if (cpu != 0) + return 0; + + return clk_get_rate(armclk) / 1000; +} + +static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + int ret; + unsigned int i; + struct cpufreq_freqs freqs; + struct s3c64xx_dvfs *dvfs; + + ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table, + target_freq, relation, &i); + if (ret != 0) + return ret; + + freqs.cpu = 0; + freqs.old = clk_get_rate(armclk) / 1000; + freqs.new = s3c64xx_freq_table[i].frequency; + freqs.flags = 0; + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index]; + + if (freqs.old == freqs.new) + return 0; + + pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + +#ifdef CONFIG_REGULATOR + if (vddarm && freqs.new > freqs.old) { + ret = regulator_set_voltage(vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n", + freqs.new, ret); + goto err; + } + } +#endif + + ret = clk_set_rate(armclk, freqs.new * 1000); + if (ret < 0) { + pr_err("cpufreq: Failed to set rate %dkHz: %d\n", + freqs.new, ret); + goto err; + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + +#ifdef CONFIG_REGULATOR + if (vddarm && freqs.new < freqs.old) { + ret = regulator_set_voltage(vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n", + freqs.new, ret); + goto err_clk; + } + } +#endif + + pr_debug("cpufreq: Set actual frequency %lukHz\n", + clk_get_rate(armclk) / 1000); + + return 0; + +err_clk: + if (clk_set_rate(armclk, freqs.old * 1000) < 0) + pr_err("Failed to restore original clock rate\n"); +err: + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return ret; +} + +#ifdef CONFIG_REGULATOR +static void __init s3c64xx_cpufreq_config_regulator(void) +{ + int count, v, i, found; + struct cpufreq_frequency_table *freq; + struct s3c64xx_dvfs *dvfs; + + count = regulator_count_voltages(vddarm); + if (count < 0) { + pr_err("cpufreq: Unable to check supported voltages\n"); + } + + freq = s3c64xx_freq_table; + while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) { + if (freq->frequency == CPUFREQ_ENTRY_INVALID) + continue; + + dvfs = &s3c64xx_dvfs_table[freq->index]; + found = 0; + + for (i = 0; i < count; i++) { + v = regulator_list_voltage(vddarm, i); + if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max) + found = 1; + } + + if (!found) { + pr_debug("cpufreq: %dkHz unsupported by regulator\n", + freq->frequency); + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + + freq++; + } + + /* Guess based on having to do an I2C/SPI write; in future we + * will be able to query the regulator performance here. */ + regulator_latency = 1 * 1000 * 1000; +} +#endif + +static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) +{ + int ret; + struct cpufreq_frequency_table *freq; + + if (policy->cpu != 0) + return -EINVAL; + + if (s3c64xx_freq_table == NULL) { + pr_err("cpufreq: No frequency information for this CPU\n"); + return -ENODEV; + } + + armclk = clk_get(NULL, "armclk"); + if (IS_ERR(armclk)) { + pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n", + PTR_ERR(armclk)); + return PTR_ERR(armclk); + } + +#ifdef CONFIG_REGULATOR + vddarm = regulator_get(NULL, "vddarm"); + if (IS_ERR(vddarm)) { + ret = PTR_ERR(vddarm); + pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret); + pr_err("cpufreq: Only frequency scaling available\n"); + vddarm = NULL; + } else { + s3c64xx_cpufreq_config_regulator(); + } +#endif + + freq = s3c64xx_freq_table; + while (freq->frequency != CPUFREQ_TABLE_END) { + unsigned long r; + + /* Check for frequencies we can generate */ + r = clk_round_rate(armclk, freq->frequency * 1000); + r /= 1000; + if (r != freq->frequency) { + pr_debug("cpufreq: %dkHz unsupported by clock\n", + freq->frequency); + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + + /* If we have no regulator then assume startup + * frequency is the maximum we can support. */ + if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0)) + freq->frequency = CPUFREQ_ENTRY_INVALID; + + freq++; + } + + policy->cur = clk_get_rate(armclk) / 1000; + + /* Datasheet says PLL stabalisation time (if we were to use + * the PLLs, which we don't currently) is ~300us worst case, + * but add some fudge. + */ + policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency; + + ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table); + if (ret != 0) { + pr_err("cpufreq: Failed to configure frequency table: %d\n", + ret); + regulator_put(vddarm); + clk_put(armclk); + } + + return ret; +} + +static struct cpufreq_driver s3c64xx_cpufreq_driver = { + .owner = THIS_MODULE, + .flags = 0, + .verify = s3c64xx_cpufreq_verify_speed, + .target = s3c64xx_cpufreq_set_target, + .get = s3c64xx_cpufreq_get_speed, + .init = s3c64xx_cpufreq_driver_init, + .name = "s3c", +}; + +static int __init s3c64xx_cpufreq_init(void) +{ + return cpufreq_register_driver(&s3c64xx_cpufreq_driver); +} +module_init(s3c64xx_cpufreq_init); diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c new file mode 100644 index 0000000..a484aae --- /dev/null +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -0,0 +1,649 @@ +/* + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * CPU frequency scaling for S5PC110/S5PV210 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/cpufreq.h> +#include <linux/reboot.h> +#include <linux/regulator/consumer.h> +#include <linux/suspend.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +static struct clk *cpu_clk; +static struct clk *dmc0_clk; +static struct clk *dmc1_clk; +static struct cpufreq_freqs freqs; +static DEFINE_MUTEX(set_freq_lock); + +/* APLL M,P,S values for 1G/800Mhz */ +#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1) +#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1) + +/* Use 800MHz when entering sleep mode */ +#define SLEEP_FREQ (800 * 1000) + +/* + * relation has an additional symantics other than the standard of cpufreq + * DISALBE_FURTHER_CPUFREQ: disable further access to target + * ENABLE_FURTUER_CPUFREQ: enable access to target + */ +enum cpufreq_access { + DISABLE_FURTHER_CPUFREQ = 0x10, + ENABLE_FURTHER_CPUFREQ = 0x20, +}; + +static bool no_cpufreq_access; + +/* + * DRAM configurations to calculate refresh counter for changing + * frequency of memory. + */ +struct dram_conf { + unsigned long freq; /* HZ */ + unsigned long refresh; /* DRAM refresh counter * 1000 */ +}; + +/* DRAM configuration (DMC0 and DMC1) */ +static struct dram_conf s5pv210_dram_conf[2]; + +enum perf_level { + L0, L1, L2, L3, L4, +}; + +enum s5pv210_mem_type { + LPDDR = 0x1, + LPDDR2 = 0x2, + DDR2 = 0x4, +}; + +enum s5pv210_dmc_port { + DMC0 = 0, + DMC1, +}; + +static struct cpufreq_frequency_table s5pv210_freq_table[] = { + {L0, 1000*1000}, + {L1, 800*1000}, + {L2, 400*1000}, + {L3, 200*1000}, + {L4, 100*1000}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct regulator *arm_regulator; +static struct regulator *int_regulator; + +struct s5pv210_dvs_conf { + int arm_volt; /* uV */ + int int_volt; /* uV */ +}; + +static const int arm_volt_max = 1350000; +static const int int_volt_max = 1250000; + +static struct s5pv210_dvs_conf dvs_conf[] = { + [L0] = { + .arm_volt = 1250000, + .int_volt = 1100000, + }, + [L1] = { + .arm_volt = 1200000, + .int_volt = 1100000, + }, + [L2] = { + .arm_volt = 1050000, + .int_volt = 1100000, + }, + [L3] = { + .arm_volt = 950000, + .int_volt = 1100000, + }, + [L4] = { + .arm_volt = 950000, + .int_volt = 1000000, + }, +}; + +static u32 clkdiv_val[5][11] = { + /* + * Clock divider value for following + * { APLL, A2M, HCLK_MSYS, PCLK_MSYS, + * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS, + * ONEDRAM, MFC, G3D } + */ + + /* L0 : [1000/200/100][166/83][133/66][200/200] */ + {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L1 : [800/200/100][166/83][133/66][200/200] */ + {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L2 : [400/200/100][166/83][133/66][200/200] */ + {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L3 : [200/200/100][166/83][133/66][200/200] */ + {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L4 : [100/100/100][83/83][66/66][100/100] */ + {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0}, +}; + +/* + * This function set DRAM refresh counter + * accoriding to operating frequency of DRAM + * ch: DMC port number 0 or 1 + * freq: Operating frequency of DRAM(KHz) + */ +static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) +{ + unsigned long tmp, tmp1; + void __iomem *reg = NULL; + + if (ch == DMC0) { + reg = (S5P_VA_DMC0 + 0x30); + } else if (ch == DMC1) { + reg = (S5P_VA_DMC1 + 0x30); + } else { + printk(KERN_ERR "Cannot find DMC port\n"); + return; + } + + /* Find current DRAM frequency */ + tmp = s5pv210_dram_conf[ch].freq; + + do_div(tmp, freq); + + tmp1 = s5pv210_dram_conf[ch].refresh; + + do_div(tmp1, tmp); + + __raw_writel(tmp1, reg); +} + +static int s5pv210_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu) + return -EINVAL; + + return cpufreq_frequency_table_verify(policy, s5pv210_freq_table); +} + +static unsigned int s5pv210_getspeed(unsigned int cpu) +{ + if (cpu) + return 0; + + return clk_get_rate(cpu_clk) / 1000; +} + +static int s5pv210_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned long reg; + unsigned int index, priv_index; + unsigned int pll_changing = 0; + unsigned int bus_speed_changing = 0; + int arm_volt, int_volt; + int ret = 0; + + mutex_lock(&set_freq_lock); + + if (relation & ENABLE_FURTHER_CPUFREQ) + no_cpufreq_access = false; + + if (no_cpufreq_access) { +#ifdef CONFIG_PM_VERBOSE + pr_err("%s:%d denied access to %s as it is disabled" + "temporarily\n", __FILE__, __LINE__, __func__); +#endif + ret = -EINVAL; + goto exit; + } + + if (relation & DISABLE_FURTHER_CPUFREQ) + no_cpufreq_access = true; + + relation &= ~(ENABLE_FURTHER_CPUFREQ | DISABLE_FURTHER_CPUFREQ); + + freqs.old = s5pv210_getspeed(0); + + if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, + target_freq, relation, &index)) { + ret = -EINVAL; + goto exit; + } + + freqs.new = s5pv210_freq_table[index].frequency; + freqs.cpu = 0; + + if (freqs.new == freqs.old) + goto exit; + + /* Finding current running level index */ + if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, + freqs.old, relation, &priv_index)) { + ret = -EINVAL; + goto exit; + } + + arm_volt = dvs_conf[index].arm_volt; + int_volt = dvs_conf[index].int_volt; + + if (freqs.new > freqs.old) { + ret = regulator_set_voltage(arm_regulator, + arm_volt, arm_volt_max); + if (ret) + goto exit; + + ret = regulator_set_voltage(int_regulator, + int_volt, int_volt_max); + if (ret) + goto exit; + } + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Check if there need to change PLL */ + if ((index == L0) || (priv_index == L0)) + pll_changing = 1; + + /* Check if there need to change System bus clock */ + if ((index == L4) || (priv_index == L4)) + bus_speed_changing = 1; + + if (bus_speed_changing) { + /* + * Reconfigure DRAM refresh counter value for minimum + * temporary clock while changing divider. + * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287 + */ + if (pll_changing) + s5pv210_set_refresh(DMC1, 83000); + else + s5pv210_set_refresh(DMC1, 100000); + + s5pv210_set_refresh(DMC0, 83000); + } + + /* + * APLL should be changed in this level + * APLL -> MPLL(for stable transition) -> APLL + * Some clock source's clock API are not prepared. + * Do not use clock API in below code. + */ + if (pll_changing) { + /* + * 1. Temporary Change divider for MFC and G3D + * SCLKA2M(200/1=200)->(200/4=50)Mhz + */ + reg = __raw_readl(S5P_CLK_DIV2); + reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); + reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) | + (3 << S5P_CLKDIV2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_DIV2); + + /* For MFC, G3D dividing */ + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & ((1 << 16) | (1 << 17))); + + /* + * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX + * (200/4=50)->(667/4=166)Mhz + */ + reg = __raw_readl(S5P_CLK_SRC2); + reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); + reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) | + (1 << S5P_CLKSRC2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_SRC2); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT1); + } while (reg & ((1 << 7) | (1 << 3))); + + /* + * 3. DMC1 refresh count for 133Mhz if (index == L4) is + * true refresh counter is already programed in upper + * code. 0x287@83Mhz + */ + if (!bus_speed_changing) + s5pv210_set_refresh(DMC1, 133000); + + /* 4. SCLKAPLL -> SCLKMPLL */ + reg = __raw_readl(S5P_CLK_SRC0); + reg &= ~(S5P_CLKSRC0_MUX200_MASK); + reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT); + __raw_writel(reg, S5P_CLK_SRC0); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT0); + } while (reg & (0x1 << 18)); + + } + + /* Change divider */ + reg = __raw_readl(S5P_CLK_DIV0); + + reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK | + S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK | + S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK | + S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK); + + reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) | + (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) | + (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) | + (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) | + (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) | + (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) | + (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) | + (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT)); + + __raw_writel(reg, S5P_CLK_DIV0); + + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & 0xff); + + /* ARM MCS value changed */ + reg = __raw_readl(S5P_ARM_MCS_CON); + reg &= ~0x3; + if (index >= L3) + reg |= 0x3; + else + reg |= 0x1; + + __raw_writel(reg, S5P_ARM_MCS_CON); + + if (pll_changing) { + /* 5. Set Lock time = 30us*24Mhz = 0x2cf */ + __raw_writel(0x2cf, S5P_APLL_LOCK); + + /* + * 6. Turn on APLL + * 6-1. Set PMS values + * 6-2. Wait untile the PLL is locked + */ + if (index == L0) + __raw_writel(APLL_VAL_1000, S5P_APLL_CON); + else + __raw_writel(APLL_VAL_800, S5P_APLL_CON); + + do { + reg = __raw_readl(S5P_APLL_CON); + } while (!(reg & (0x1 << 29))); + + /* + * 7. Change souce clock from SCLKMPLL(667Mhz) + * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX + * (667/4=166)->(200/4=50)Mhz + */ + reg = __raw_readl(S5P_CLK_SRC2); + reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); + reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) | + (0 << S5P_CLKSRC2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_SRC2); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT1); + } while (reg & ((1 << 7) | (1 << 3))); + + /* + * 8. Change divider for MFC and G3D + * (200/4=50)->(200/1=200)Mhz + */ + reg = __raw_readl(S5P_CLK_DIV2); + reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); + reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) | + (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_DIV2); + + /* For MFC, G3D dividing */ + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & ((1 << 16) | (1 << 17))); + + /* 9. Change MPLL to APLL in MSYS_MUX */ + reg = __raw_readl(S5P_CLK_SRC0); + reg &= ~(S5P_CLKSRC0_MUX200_MASK); + reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT); + __raw_writel(reg, S5P_CLK_SRC0); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT0); + } while (reg & (0x1 << 18)); + + /* + * 10. DMC1 refresh counter + * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c + * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618 + */ + if (!bus_speed_changing) + s5pv210_set_refresh(DMC1, 200000); + } + + /* + * L4 level need to change memory bus speed, hence onedram clock divier + * and memory refresh parameter should be changed + */ + if (bus_speed_changing) { + reg = __raw_readl(S5P_CLK_DIV6); + reg &= ~S5P_CLKDIV6_ONEDRAM_MASK; + reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT); + __raw_writel(reg, S5P_CLK_DIV6); + + do { + reg = __raw_readl(S5P_CLKDIV_STAT1); + } while (reg & (1 << 15)); + + /* Reconfigure DRAM refresh counter value */ + if (index != L4) { + /* + * DMC0 : 166Mhz + * DMC1 : 200Mhz + */ + s5pv210_set_refresh(DMC0, 166000); + s5pv210_set_refresh(DMC1, 200000); + } else { + /* + * DMC0 : 83Mhz + * DMC1 : 100Mhz + */ + s5pv210_set_refresh(DMC0, 83000); + s5pv210_set_refresh(DMC1, 100000); + } + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + if (freqs.new < freqs.old) { + regulator_set_voltage(int_regulator, + int_volt, int_volt_max); + + regulator_set_voltage(arm_regulator, + arm_volt, arm_volt_max); + } + + printk(KERN_DEBUG "Perf changed[L%d]\n", index); + +exit: + mutex_unlock(&set_freq_lock); + return ret; +} + +#ifdef CONFIG_PM +static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy) +{ + return 0; +} + +static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy) +{ + return 0; +} +#endif + +static int check_mem_type(void __iomem *dmc_reg) +{ + unsigned long val; + + val = __raw_readl(dmc_reg + 0x4); + val = (val & (0xf << 8)); + + return val >> 8; +} + +static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) +{ + unsigned long mem_type; + int ret; + + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + dmc0_clk = clk_get(NULL, "sclk_dmc0"); + if (IS_ERR(dmc0_clk)) { + ret = PTR_ERR(dmc0_clk); + goto out_dmc0; + } + + dmc1_clk = clk_get(NULL, "hclk_msys"); + if (IS_ERR(dmc1_clk)) { + ret = PTR_ERR(dmc1_clk); + goto out_dmc1; + } + + if (policy->cpu != 0) { + ret = -EINVAL; + goto out_dmc1; + } + + /* + * check_mem_type : This driver only support LPDDR & LPDDR2. + * other memory type is not supported. + */ + mem_type = check_mem_type(S5P_VA_DMC0); + + if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { + printk(KERN_ERR "CPUFreq doesn't support this memory type\n"); + ret = -EINVAL; + goto out_dmc1; + } + + /* Find current refresh counter and frequency each DMC */ + s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000); + s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk); + + s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000); + s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); + + policy->cur = policy->min = policy->max = s5pv210_getspeed(0); + + cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu); + + policy->cpuinfo.transition_latency = 40000; + + return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table); + +out_dmc1: + clk_put(dmc0_clk); +out_dmc0: + clk_put(cpu_clk); + return ret; +} + +static int s5pv210_cpufreq_notifier_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + int ret; + + switch (event) { + case PM_SUSPEND_PREPARE: + ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, + DISABLE_FURTHER_CPUFREQ); + if (ret < 0) + return NOTIFY_BAD; + + return NOTIFY_OK; + case PM_POST_RESTORE: + case PM_POST_SUSPEND: + cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, + ENABLE_FURTHER_CPUFREQ); + + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + int ret; + + ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, + DISABLE_FURTHER_CPUFREQ); + if (ret < 0) + return NOTIFY_BAD; + + return NOTIFY_DONE; +} + +static struct cpufreq_driver s5pv210_driver = { + .flags = CPUFREQ_STICKY, + .verify = s5pv210_verify_speed, + .target = s5pv210_target, + .get = s5pv210_getspeed, + .init = s5pv210_cpu_init, + .name = "s5pv210", +#ifdef CONFIG_PM + .suspend = s5pv210_cpufreq_suspend, + .resume = s5pv210_cpufreq_resume, +#endif +}; + +static struct notifier_block s5pv210_cpufreq_notifier = { + .notifier_call = s5pv210_cpufreq_notifier_event, +}; + +static struct notifier_block s5pv210_cpufreq_reboot_notifier = { + .notifier_call = s5pv210_cpufreq_reboot_notifier_event, +}; + +static int __init s5pv210_cpufreq_init(void) +{ + arm_regulator = regulator_get(NULL, "vddarm"); + if (IS_ERR(arm_regulator)) { + pr_err("failed to get regulator vddarm"); + return PTR_ERR(arm_regulator); + } + + int_regulator = regulator_get(NULL, "vddint"); + if (IS_ERR(int_regulator)) { + pr_err("failed to get regulator vddint"); + regulator_put(arm_regulator); + return PTR_ERR(int_regulator); + } + + register_pm_notifier(&s5pv210_cpufreq_notifier); + register_reboot_notifier(&s5pv210_cpufreq_reboot_notifier); + + return cpufreq_register_driver(&s5pv210_driver); +} + +late_initcall(s5pv210_cpufreq_init); |