diff options
author | Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | 2010-01-20 16:02:24 (GMT) |
---|---|---|
committer | Jiri Kosina <jkosina@suse.cz> | 2010-02-05 11:22:40 (GMT) |
commit | 9ddc5b6f18fbac07d2746566b73b89e89fdd4e6a (patch) | |
tree | aaf691482ac8e36ccccb413b9b698063e6d0b489 /drivers | |
parent | 659431fcafd820cc426afedadcc4548933224985 (diff) | |
download | linux-9ddc5b6f18fbac07d2746566b73b89e89fdd4e6a.tar.xz |
tree-wide: fix typos "ammount" -> "amount"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/char/serial167.c | 2 | ||||
-rw-r--r-- | drivers/isdn/sc/hardware.h | 2 | ||||
-rw-r--r-- | drivers/message/i2o/iop.c | 2 | ||||
-rw-r--r-- | drivers/net/ks8851.c | 2 | ||||
-rw-r--r-- | drivers/platform/x86/thinkpad_acpi.c | 4 | ||||
-rw-r--r-- | drivers/scsi/libfc/fc_fcp.c | 2 | ||||
-rw-r--r-- | drivers/serial/samsung.c | 2 | ||||
-rw-r--r-- | drivers/usb/serial/opticon.c | 2 | ||||
-rw-r--r-- | drivers/usb/serial/symbolserial.c | 2 |
9 files changed, 10 insertions, 10 deletions
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 452370a..aee3c0d 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -1990,7 +1990,7 @@ void mvme167_serial_console_setup(int cflag) /* * Attempt to set up all channels to something reasonable, and * bang out a INIT_CHAN command. We should then be able to limit - * the ammount of fiddling we have to do in normal running. + * the amount of fiddling we have to do in normal running. */ for (ch = 3; ch >= 0; ch--) { diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h index 9e6d530..6273248 100644 --- a/drivers/isdn/sc/hardware.h +++ b/drivers/isdn/sc/hardware.h @@ -87,7 +87,7 @@ #define BRI_CHANNELS 2 /* Number of B channels */ #define BRI_BASEPG_VAL 0x98 #define BRI_MAGIC 0x60000 /* Magic Number */ -#define BRI_MEMSIZE 0x10000 /* Ammount of RAM (64K) */ +#define BRI_MEMSIZE 0x10000 /* Amount of RAM (64K) */ #define BRI_PARTNO "72-029" #define BRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS; /* diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index e5ab621..ef5ce26 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -539,7 +539,7 @@ static int i2o_iop_reset(struct i2o_controller *c) * which is indeterminate. We need to wait until the IOP has * rebooted before we can let the system talk to it. We read * the inbound Free_List until a message is available. If we - * can't read one in the given ammount of time, we assume the + * can't read one in the given amount of time, we assume the * IOP could not reboot properly. */ osm_debug("%s: Reset in progress, waiting for reboot...\n", diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index 6d3ac65..cfebe0e 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -407,7 +407,7 @@ static irqreturn_t ks8851_irq(int irq, void *pw) * @buff: The buffer address * @len: The length of the data to read * - * Issue an RXQ FIFO read command and read the @len ammount of data from + * Issue an RXQ FIFO read command and read the @len amount of data from * the FIFO into the buffer specified by @buff. */ static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index e67e4fe..215621c 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -1667,7 +1667,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv) * Table of recommended minimum BIOS versions * * Reasons for listing: - * 1. Stable BIOS, listed because the unknown ammount of + * 1. Stable BIOS, listed because the unknown amount of * bugs and bad ACPI behaviour on older versions * * 2. BIOS or EC fw with known bugs that trigger on Linux @@ -7070,7 +7070,7 @@ static struct ibm_struct volume_driver_data = { * * Fan speed changes of any sort (including those caused by the * disengaged mode) are usually done slowly by the firmware as the - * maximum ammount of fan duty cycle change per second seems to be + * maximum amount of fan duty cycle change per second seems to be * limited. * * Reading is not available if GFAN exists. diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 881d5df..96ee599 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -522,7 +522,7 @@ crc_err: * * Called after receiving a Transfer Ready data descriptor. * If the LLD is capable of sequence offload then send down the - * seq_blen ammount of data in single frame, otherwise send + * seq_blen amount of data in single frame, otherwise send * multiple frames of the maximum frame payload supported by * the target port. */ diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 52e3df1..03c010a 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) unsigned long ufstat, utrstat; if (ufcon & S3C2410_UFCON_FIFOMODE) { - /* fifo mode - check ammount of data in fifo registers... */ + /* fifo mode - check amount of data in fifo registers... */ ufstat = rd_regl(port, S3C2410_UFSTAT); return (ufstat & info->tx_fifofull) ? 0 : 1; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 4cdb975..96937f1 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -120,7 +120,7 @@ static void opticon_bulk_callback(struct urb *urb) } } else { dev_dbg(&priv->udev->dev, - "Improper ammount of data received from the device, " + "Improper amount of data received from the device, " "%d bytes", urb->actual_length); } diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index b282c0f..aebfcf6 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -100,7 +100,7 @@ static void symbol_int_callback(struct urb *urb) } } else { dev_dbg(&priv->udev->dev, - "Improper ammount of data received from the device, " + "Improper amount of data received from the device, " "%d bytes", urb->actual_length); } |