summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-02-10 23:32:13 (GMT)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-02-10 23:32:13 (GMT)
commitcfa2771bc511017159ea076965fe385101e03798 (patch)
tree1c962c3c01741a87d2bf22025c2f39d0f6baa28d /drivers
parentc79b60ddf6ff0e884c09cecbbddd656f7bf277a3 (diff)
downloadlinux-cfa2771bc511017159ea076965fe385101e03798.tar.xz
pdc202xx_old: always enable burst mode
Alan has noticed that distros always enabled burst mode (+ datasheet confirms that it is the right thing to do). Thus fix pdc202xx_old host driver to do it unconditionally and remove no longer needed CONFIG_PDC202XX_BURST option. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/Kconfig17
-rw-r--r--drivers/ide/pci/pdc202xx_old.c22
2 files changed, 0 insertions, 39 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 043c34a..d2c4f06 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -688,23 +688,6 @@ config BLK_DEV_PDC202XX_OLD
If unsure, say N.
-config PDC202XX_BURST
- bool "Special UDMA Feature"
- depends on BLK_DEV_PDC202XX_OLD
- help
- This option causes the pdc202xx driver to enable UDMA modes on the
- PDC202xx even when the PDC202xx BIOS has not done so.
-
- It was originally designed for the PDC20246/Ultra33, whose BIOS will
- only setup UDMA on the first two PDC20246 cards. It has also been
- used successfully on a PDC20265/Ultra100, allowing use of UDMA modes
- when the PDC20265 BIOS has been disabled (for faster boot up).
-
- Please read the comments at the top of
- <file:drivers/ide/pci/pdc202xx_old.c>.
-
- If unsure, say N.
-
config BLK_DEV_PDC202XX_NEW
tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
select BLK_DEV_IDEDMA_PCI
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index da43297..150422e 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -3,26 +3,6 @@
* Copyright (C) 2006-2007 MontaVista Software, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
- * Promise Ultra33 cards with BIOS v1.20 through 1.28 will need this
- * compiled into the kernel if you have more than one card installed.
- * Note that BIOS v1.29 is reported to fix the problem. Since this is
- * safe chipset tuning, including this support is harmless
- *
- * Promise Ultra66 cards with BIOS v1.11 this
- * compiled into the kernel if you have more than one card installed.
- *
- * Promise Ultra100 cards.
- *
- * The latest chipset code will support the following ::
- * Three Ultra33 controllers and 12 drives.
- * 8 are UDMA supported and 4 are limited to DMA mode 2 multi-word.
- * The 8/4 ratio is a BIOS code limit by promise.
- *
- * UNLESS you enable "CONFIG_PDC202XX_BURST"
- *
- */
-
-/*
* Portions Copyright (C) 1999 Promise Technology, Inc.
* Author: Frank Tiernan (frankt@promise.com)
* Released under terms of General Public License
@@ -344,7 +324,6 @@ static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)
(primary_mode & 1) ? "MASTER" : "PCI",
(secondary_mode & 1) ? "MASTER" : "PCI" );
-#ifdef CONFIG_PDC202XX_BURST
if (!(udma_speed_flag & 1)) {
printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ",
hwif->cds->name, udma_speed_flag,
@@ -352,7 +331,6 @@ static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)
outb(udma_speed_flag | 1, dmabase | 0x1f);
printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN");
}
-#endif /* CONFIG_PDC202XX_BURST */
ide_setup_dma(hwif, dmabase);
}