diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-07-27 21:30:41 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-07-27 21:30:41 (GMT) |
commit | d85486d47123961bd8b08e94f6d4886c59a1fd76 (patch) | |
tree | 8bfcebed0fd1753fa8f0fa85286551b80e8ed7d1 /drivers | |
parent | 66304207cd341045df34195b4a8d422075bff513 (diff) | |
parent | 0808882863774ab69066d83f49f511606be024e0 (diff) | |
download | linux-d85486d47123961bd8b08e94f6d4886c59a1fd76.tar.xz |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"Updates for the input subsystem. This contains the following new
drivers promised in the last merge window:
- driver for touchscreen controller found in Surface 3
- driver for Pegasus Notetaker tablet
- driver for Atmel Captouch Buttons
- driver for Raydium I2C touchscreen controllers
- powerkey driver for HISI 65xx SoC
plus a few fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
Input: tty/vt/keyboard - use memdup_user()
Input: pegasus_notetaker - set device mode in reset_resume() if in use
Input: pegasus_notetaker - cancel workqueue's work in suspend()
Input: pegasus_notetaker - fix usb_autopm calls to be balanced
Input: pegasus_notetaker - handle usb control msg errors
Input: wacom_w8001 - handle errors from input_mt_init_slots()
Input: wacom_w8001 - resolution wasn't set for ABS_MT_POSITION_X/Y
Input: pixcir_ts - add support for axis inversion / swapping
Input: icn8318 - use of_touchscreen helpers for inverting / swapping axes
Input: edt-ft5x06 - add support for inverting / swapping axes
Input: of_touchscreen - add support for inverted / swapped axes
Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in rmi_f11_rel_pos_report
Input: synaptics-rmi4 - remove unneeded variable
Input: synaptics-rmi4 - remove pointer to rmi_function in f12_data
Input: synaptics-rmi4 - support regulator supplies
Input: raydium_i2c_ts - check CRC of incoming packets
Input: xen-kbdfront - prefer xenbus_write() over xenbus_printf() where possible
Input: fix a double word "is is" in include/linux/input.h
Input: add powerkey driver for HISI 65xx SoC
Input: apanel - spelling mistake - "skiping" -> "skipping"
...
Diffstat (limited to 'drivers')
35 files changed, 2841 insertions, 127 deletions
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index 54fce56..a1bbec9 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -218,8 +218,23 @@ void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count) } input_event(dev, EV_KEY, BTN_TOUCH, count > 0); - if (use_count) + + if (use_count) { + if (count == 0 && + !test_bit(ABS_MT_DISTANCE, dev->absbit) && + test_bit(ABS_DISTANCE, dev->absbit) && + input_abs_get_val(dev, ABS_DISTANCE) != 0) { + /* + * Force reporting BTN_TOOL_FINGER for devices that + * only report general hover (and not per-contact + * distance) when contact is in proximity but not + * on the surface. + */ + count = 1; + } + input_mt_report_finger_count(dev, count); + } if (oldest) { int x = input_mt_get_value(oldest, ABS_MT_POSITION_X); diff --git a/drivers/input/input.c b/drivers/input/input.c index b87ffbd..d95c34e 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -153,8 +153,6 @@ static void input_pass_values(struct input_dev *dev, rcu_read_unlock(); - add_input_randomness(vals->type, vals->code, vals->value); - /* trigger auto repeat for key events */ if (test_bit(EV_REP, dev->evbit) && test_bit(EV_KEY, dev->evbit)) { for (v = vals; v != vals + count; v++) { @@ -371,9 +369,10 @@ static int input_get_disposition(struct input_dev *dev, static void input_handle_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { - int disposition; + int disposition = input_get_disposition(dev, type, code, &value); - disposition = input_get_disposition(dev, type, code, &value); + if (disposition != INPUT_IGNORE_EVENT && type != EV_SYN) + add_input_randomness(type, code, value); if ((disposition & INPUT_PASS_TO_DEVICE) && dev->event) dev->event(dev, type, code, value); diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c index e92dfd8..ec0070e 100644 --- a/drivers/input/keyboard/tc3589x-keypad.c +++ b/drivers/input/keyboard/tc3589x-keypad.c @@ -32,7 +32,7 @@ #define TC3589x_PULL_DOWN_MASK 0x1 #define TC3589x_PULL_UP_MASK 0x2 #define TC3589x_PULLUP_ALL_MASK 0xAA -#define TC3589x_IO_PULL_VAL(index, mask) ((mask)<<((index)%4)*2)) +#define TC3589x_IO_PULL_VAL(index, mask) ((mask)<<((index)%4)*2) /* Bit masks for IOCFG register */ #define IOCFG_BALLCFG 0x01 diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index acc5394..7d61439 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -552,7 +552,7 @@ static int tegra_kbc_parse_dt(struct tegra_kbc *kbc) if (!num_rows || !num_cols || ((num_rows + num_cols) > KBC_MAX_GPIO)) { dev_err(kbc->dev, - "keypad rows/columns not porperly specified\n"); + "keypad rows/columns not properly specified\n"); return -EINVAL; } diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 1f2337a..efb0ca8 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -82,6 +82,20 @@ config INPUT_ARIZONA_HAPTICS To compile this driver as a module, choose M here: the module will be called arizona-haptics. +config INPUT_ATMEL_CAPTOUCH + tristate "Atmel Capacitive Touch Button Driver" + depends on OF || COMPILE_TEST + depends on I2C + help + Say Y here if an Atmel Capacitive Touch Button device which + implements "captouch" protocol is connected to I2C bus. Typically + this device consists of Atmel Touch sensor controlled by AtMegaXX + MCU running firmware based on Qtouch library. + One should find "atmel,captouch" node in the board specific DTS. + + To compile this driver as a module, choose M here: the + module will be called atmel_captouch. + config INPUT_BMA150 tristate "BMA150/SMB380 acceleration sensor support" depends on I2C @@ -796,4 +810,13 @@ config INPUT_DRV2667_HAPTICS To compile this driver as a module, choose M here: the module will be called drv2667-haptics. +config INPUT_HISI_POWERKEY + tristate "Hisilicon PMIC ONKEY support" + depends on ARCH_HISI || COMPILE_TEST + help + Say Y to enable support for PMIC ONKEY. + + To compile this driver as a module, choose M here: the + module will be called hisi_powerkey. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 0357a08..6a1e5e2 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o +obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o obj-$(CONFIG_INPUT_BMA150) += bma150.o obj-$(CONFIG_INPUT_CM109) += cm109.o @@ -34,6 +35,7 @@ obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o +obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c index a8d2b8d..53630af 100644 --- a/drivers/input/misc/apanel.c +++ b/drivers/input/misc/apanel.c @@ -297,7 +297,7 @@ static int __init apanel_init(void) if (slave != i2c_addr) { pr_notice(APANEL ": only one SMBus slave " - "address supported, skiping device...\n"); + "address supported, skipping device...\n"); continue; } diff --git a/drivers/input/misc/atmel_captouch.c b/drivers/input/misc/atmel_captouch.c new file mode 100644 index 0000000..9412654 --- /dev/null +++ b/drivers/input/misc/atmel_captouch.c @@ -0,0 +1,290 @@ +/* + * Atmel Atmegaxx Capacitive Touch Button Driver + * + * Copyright (C) 2016 Google, inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * It's irrelevant that the HW used to develop captouch driver is based + * on Atmega88PA part and uses QtouchADC parts for sensing touch. + * Calling this driver "captouch" is an arbitrary way to distinguish + * the protocol this driver supported by other atmel/qtouch drivers. + * + * Captouch driver supports a newer/different version of the I2C + * registers/commands than the qt1070.c driver. + * Don't let the similarity of the general driver structure fool you. + * + * For raw i2c access from userspace, use i2cset/i2cget + * to poke at /dev/i2c-N devices. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +/* Maximum number of buttons supported */ +#define MAX_NUM_OF_BUTTONS 8 + +/* Registers */ +#define REG_KEY1_THRESHOLD 0x02 +#define REG_KEY2_THRESHOLD 0x03 +#define REG_KEY3_THRESHOLD 0x04 +#define REG_KEY4_THRESHOLD 0x05 + +#define REG_KEY1_REF_H 0x20 +#define REG_KEY1_REF_L 0x21 +#define REG_KEY2_REF_H 0x22 +#define REG_KEY2_REF_L 0x23 +#define REG_KEY3_REF_H 0x24 +#define REG_KEY3_REF_L 0x25 +#define REG_KEY4_REF_H 0x26 +#define REG_KEY4_REF_L 0x27 + +#define REG_KEY1_DLT_H 0x30 +#define REG_KEY1_DLT_L 0x31 +#define REG_KEY2_DLT_H 0x32 +#define REG_KEY2_DLT_L 0x33 +#define REG_KEY3_DLT_H 0x34 +#define REG_KEY3_DLT_L 0x35 +#define REG_KEY4_DLT_H 0x36 +#define REG_KEY4_DLT_L 0x37 + +#define REG_KEY_STATE 0x3C + +/* + * @i2c_client: I2C slave device client pointer + * @input: Input device pointer + * @num_btn: Number of buttons + * @keycodes: map of button# to KeyCode + * @prev_btn: Previous key state to detect button "press" or "release" + * @xfer_buf: I2C transfer buffer + */ +struct atmel_captouch_device { + struct i2c_client *client; + struct input_dev *input; + u32 num_btn; + u32 keycodes[MAX_NUM_OF_BUTTONS]; + u8 prev_btn; + u8 xfer_buf[8] ____cacheline_aligned; +}; + +/* + * Read from I2C slave device + * The protocol is that the client has to provide both the register address + * and the length, and while reading back the device would prepend the data + * with address and length for verification. + */ +static int atmel_read(struct atmel_captouch_device *capdev, + u8 reg, u8 *data, size_t len) +{ + struct i2c_client *client = capdev->client; + struct device *dev = &client->dev; + struct i2c_msg msg[2]; + int err; + + if (len > sizeof(capdev->xfer_buf) - 2) + return -EINVAL; + + capdev->xfer_buf[0] = reg; + capdev->xfer_buf[1] = len; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].buf = capdev->xfer_buf; + msg[0].len = 2; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = capdev->xfer_buf; + msg[1].len = len + 2; + + err = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (err != ARRAY_SIZE(msg)) + return err < 0 ? err : -EIO; + + if (capdev->xfer_buf[0] != reg) { + dev_err(dev, + "I2C read error: register address does not match (%#02x vs %02x)\n", + capdev->xfer_buf[0], reg); + return -ECOMM; + } + + memcpy(data, &capdev->xfer_buf[2], len); + + return 0; +} + +/* + * Handle interrupt and report the key changes to the input system. + * Multi-touch can be supported; however, it really depends on whether + * the device can multi-touch. + */ +static irqreturn_t atmel_captouch_isr(int irq, void *data) +{ + struct atmel_captouch_device *capdev = data; + struct device *dev = &capdev->client->dev; + int error; + int i; + u8 new_btn; + u8 changed_btn; + + error = atmel_read(capdev, REG_KEY_STATE, &new_btn, 1); + if (error) { + dev_err(dev, "failed to read button state: %d\n", error); + goto out; + } + + dev_dbg(dev, "%s: button state %#02x\n", __func__, new_btn); + + changed_btn = new_btn ^ capdev->prev_btn; + capdev->prev_btn = new_btn; + + for (i = 0; i < capdev->num_btn; i++) { + if (changed_btn & BIT(i)) + input_report_key(capdev->input, + capdev->keycodes[i], + new_btn & BIT(i)); + } + + input_sync(capdev->input); + +out: + return IRQ_HANDLED; +} + +/* + * Probe function to setup the device, input system and interrupt + */ +static int atmel_captouch_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct atmel_captouch_device *capdev; + struct device *dev = &client->dev; + struct device_node *node; + int i; + int err; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) { + dev_err(dev, "needed i2c functionality is not supported\n"); + return -EINVAL; + } + + capdev = devm_kzalloc(dev, sizeof(*capdev), GFP_KERNEL); + if (!capdev) + return -ENOMEM; + + capdev->client = client; + i2c_set_clientdata(client, capdev); + + err = atmel_read(capdev, REG_KEY_STATE, + &capdev->prev_btn, sizeof(capdev->prev_btn)); + if (err) { + dev_err(dev, "failed to read initial button state: %d\n", err); + return err; + } + + capdev->input = devm_input_allocate_device(dev); + if (!capdev->input) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + capdev->input->id.bustype = BUS_I2C; + capdev->input->id.product = 0x880A; + capdev->input->id.version = 0; + capdev->input->name = "ATMegaXX Capacitive Button Controller"; + __set_bit(EV_KEY, capdev->input->evbit); + + node = dev->of_node; + if (!node) { + dev_err(dev, "failed to find matching node in device tree\n"); + return -EINVAL; + } + + if (of_property_read_bool(node, "autorepeat")) + __set_bit(EV_REP, capdev->input->evbit); + + capdev->num_btn = of_property_count_u32_elems(node, "linux,keymap"); + if (capdev->num_btn > MAX_NUM_OF_BUTTONS) + capdev->num_btn = MAX_NUM_OF_BUTTONS; + + err = of_property_read_u32_array(node, "linux,keycodes", + capdev->keycodes, + capdev->num_btn); + if (err) { + dev_err(dev, + "failed to read linux,keycode property: %d\n", err); + return err; + } + + for (i = 0; i < capdev->num_btn; i++) + __set_bit(capdev->keycodes[i], capdev->input->keybit); + + capdev->input->keycode = capdev->keycodes; + capdev->input->keycodesize = sizeof(capdev->keycodes[0]); + capdev->input->keycodemax = capdev->num_btn; + + err = input_register_device(capdev->input); + if (err) + return err; + + err = devm_request_threaded_irq(dev, client->irq, + NULL, atmel_captouch_isr, + IRQF_ONESHOT, + "atmel_captouch", capdev); + if (err) { + dev_err(dev, "failed to request irq %d: %d\n", + client->irq, err); + return err; + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id atmel_captouch_of_id[] = { + { + .compatible = "atmel,captouch", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, atmel_captouch_of_id); +#endif + +static const struct i2c_device_id atmel_captouch_id[] = { + { "atmel_captouch", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, atmel_captouch_id); + +static struct i2c_driver atmel_captouch_driver = { + .probe = atmel_captouch_probe, + .id_table = atmel_captouch_id, + .driver = { + .name = "atmel_captouch", + .of_match_table = of_match_ptr(atmel_captouch_of_id), + }, +}; +module_i2c_driver(atmel_captouch_driver); + +/* Module information */ +MODULE_AUTHOR("Hung-yu Wu <hywu@google.com>"); +MODULE_DESCRIPTION("Atmel ATmegaXX Capacitance Touch Sensor I2C Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/misc/hisi_powerkey.c b/drivers/input/misc/hisi_powerkey.c new file mode 100644 index 0000000..675539c --- /dev/null +++ b/drivers/input/misc/hisi_powerkey.c @@ -0,0 +1,142 @@ +/* + * Hisilicon PMIC powerkey driver + * + * Copyright (C) 2013 Hisilicon Ltd. + * Copyright (C) 2015, 2016 Linaro Ltd. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/input.h> +#include <linux/slab.h> + +/* the held interrupt will trigger after 4 seconds */ +#define MAX_HELD_TIME (4 * MSEC_PER_SEC) + +static irqreturn_t hi65xx_power_press_isr(int irq, void *q) +{ + struct input_dev *input = q; + + pm_wakeup_event(input->dev.parent, MAX_HELD_TIME); + input_report_key(input, KEY_POWER, 1); + input_sync(input); + + return IRQ_HANDLED; +} + +static irqreturn_t hi65xx_power_release_isr(int irq, void *q) +{ + struct input_dev *input = q; + + pm_wakeup_event(input->dev.parent, MAX_HELD_TIME); + input_report_key(input, KEY_POWER, 0); + input_sync(input); + + return IRQ_HANDLED; +} + +static irqreturn_t hi65xx_restart_toggle_isr(int irq, void *q) +{ + struct input_dev *input = q; + int value = test_bit(KEY_RESTART, input->key); + + pm_wakeup_event(input->dev.parent, MAX_HELD_TIME); + input_report_key(input, KEY_RESTART, !value); + input_sync(input); + + return IRQ_HANDLED; +} + +static const struct { + const char *name; + irqreturn_t (*handler)(int irq, void *q); +} hi65xx_irq_info[] = { + { "down", hi65xx_power_press_isr }, + { "up", hi65xx_power_release_isr }, + { "hold 4s", hi65xx_restart_toggle_isr }, +}; + +static int hi65xx_powerkey_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct input_dev *input; + int irq, i, error; + + input = devm_input_allocate_device(&pdev->dev); + if (!input) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + input->phys = "hisi_on/input0"; + input->name = "HISI 65xx PowerOn Key"; + + input_set_capability(input, EV_KEY, KEY_POWER); + input_set_capability(input, EV_KEY, KEY_RESTART); + + for (i = 0; i < ARRAY_SIZE(hi65xx_irq_info); i++) { + + irq = platform_get_irq_byname(pdev, hi65xx_irq_info[i].name); + if (irq < 0) { + error = irq; + dev_err(dev, "couldn't get irq %s: %d\n", + hi65xx_irq_info[i].name, error); + return error; + } + + error = devm_request_any_context_irq(dev, irq, + hi65xx_irq_info[i].handler, + IRQF_ONESHOT, + hi65xx_irq_info[i].name, + input); + if (error < 0) { + dev_err(dev, "couldn't request irq %s: %d\n", + hi65xx_irq_info[i].name, error); + return error; + } + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, "failed to register input device: %d\n", + error); + return error; + } + + device_init_wakeup(&pdev->dev, 1); + + return 0; +} + +static int hi65xx_powerkey_remove(struct platform_device *pdev) +{ + device_init_wakeup(&pdev->dev, 0); + + return 0; +} + +static struct platform_driver hi65xx_powerkey_driver = { + .driver = { + .name = "hi65xx-powerkey", + }, + .probe = hi65xx_powerkey_probe, + .remove = hi65xx_powerkey_remove, +}; +module_platform_driver(hi65xx_powerkey_driver); + +MODULE_AUTHOR("Zhiliang Xue <xuezhiliang@huawei.com"); +MODULE_DESCRIPTION("Hisi PMIC Power key driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/misc/regulator-haptic.c b/drivers/input/misc/regulator-haptic.c index a804705..2e8f801 100644 --- a/drivers/input/misc/regulator-haptic.c +++ b/drivers/input/misc/regulator-haptic.c @@ -124,7 +124,7 @@ regulator_haptic_parse_dt(struct device *dev, struct regulator_haptic *haptic) node = dev->of_node; if(!node) { - dev_err(dev, "Missing dveice tree data\n"); + dev_err(dev, "Missing device tree data\n"); return -EINVAL; } diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c index 0a9ad2cf..227fbd2 100644 --- a/drivers/input/misc/xen-kbdfront.c +++ b/drivers/input/misc/xen-kbdfront.c @@ -130,8 +130,8 @@ static int xenkbd_probe(struct xenbus_device *dev, if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-abs-pointer", "%d", &abs) < 0) abs = 0; if (abs) { - ret = xenbus_printf(XBT_NIL, dev->nodename, - "request-abs-pointer", "1"); + ret = xenbus_write(XBT_NIL, dev->nodename, + "request-abs-pointer", "1"); if (ret) { pr_warning("xenkbd: can't request abs-pointer"); abs = 0; @@ -327,8 +327,8 @@ InitWait: if (ret < 0) val = 0; if (val) { - ret = xenbus_printf(XBT_NIL, info->xbdev->nodename, - "request-abs-pointer", "1"); + ret = xenbus_write(XBT_NIL, info->xbdev->nodename, + "request-abs-pointer", "1"); if (ret) pr_warning("xenkbd: can't request abs-pointer"); } diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index be5b399..615d23e 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1708,7 +1708,7 @@ int elantech_init(struct psmouse *psmouse) snprintf(etd->tp_phys, sizeof(etd->tp_phys), "%s/input1", psmouse->ps2dev.serio->phys); tp_dev->phys = etd->tp_phys; - tp_dev->name = "Elantech PS/2 TrackPoint"; + tp_dev->name = "ETPS/2 Elantech TrackPoint"; tp_dev->id.bustype = BUS_I8042; tp_dev->id.vendor = 0x0002; tp_dev->id.product = PSMOUSE_ELANTECH; diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index e5ed216..13d324c 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -287,7 +287,7 @@ static int lifebook_create_relative_device(struct psmouse *psmouse) "%s/input1", psmouse->ps2dev.serio->phys); dev2->phys = priv->phys; - dev2->name = "PS/2 Touchpad"; + dev2->name = "LBPS/2 Fujitsu Lifebook Touchpad"; dev2->id.bustype = BUS_I8042; dev2->id.vendor = 0x0002; dev2->id.product = PSMOUSE_LIFEBOOK; diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c index eb362bc..fac81fc 100644 --- a/drivers/input/rmi4/rmi_f01.c +++ b/drivers/input/rmi4/rmi_f01.c @@ -81,26 +81,26 @@ struct f01_basic_properties { * This bit disables whatever sleep mode may be selected by the sleep_mode * field and forces the device to run at full power without sleeping. */ -#define RMI_F01_CRTL0_NOSLEEP_BIT BIT(2) +#define RMI_F01_CTRL0_NOSLEEP_BIT BIT(2) /* * When this bit is set, the touch controller employs a noise-filtering * algorithm designed for use with a connected battery charger. */ -#define RMI_F01_CRTL0_CHARGER_BIT BIT(5) +#define RMI_F01_CTRL0_CHARGER_BIT BIT(5) /* * Sets the report rate for the device. The effect of this setting is * highly product dependent. Check the spec sheet for your particular * touch sensor. */ -#define RMI_F01_CRTL0_REPORTRATE_BIT BIT(6) +#define RMI_F01_CTRL0_REPORTRATE_BIT BIT(6) /* * Written by the host as an indicator that the device has been * successfully configured. */ -#define RMI_F01_CRTL0_CONFIGURED_BIT BIT(7) +#define RMI_F01_CTRL0_CONFIGURED_BIT BIT(7) /** * @ctrl0 - see the bit definitions above. @@ -330,10 +330,10 @@ static int rmi_f01_probe(struct rmi_function *fn) case RMI_F01_NOSLEEP_DEFAULT: break; case RMI_F01_NOSLEEP_OFF: - f01->device_control.ctrl0 &= ~RMI_F01_CRTL0_NOSLEEP_BIT; + f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_NOSLEEP_BIT; break; case RMI_F01_NOSLEEP_ON: - f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT; + f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT; break; } @@ -349,7 +349,7 @@ static int rmi_f01_probe(struct rmi_function *fn) f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK; } - f01->device_control.ctrl0 |= RMI_F01_CRTL0_CONFIGURED_BIT; + f01->device_control.ctrl0 |= RMI_F01_CTRL0_CONFIGURED_BIT; error = rmi_write(rmi_dev, fn->fd.control_base_addr, f01->device_control.ctrl0); @@ -535,8 +535,8 @@ static int rmi_f01_suspend(struct rmi_function *fn) int error; f01->old_nosleep = - f01->device_control.ctrl0 & RMI_F01_CRTL0_NOSLEEP_BIT; - f01->device_control.ctrl0 &= ~RMI_F01_CRTL0_NOSLEEP_BIT; + f01->device_control.ctrl0 & RMI_F01_CTRL0_NOSLEEP_BIT; + f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_NOSLEEP_BIT; f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK; if (device_may_wakeup(fn->rmi_dev->xport->dev)) @@ -549,7 +549,7 @@ static int rmi_f01_suspend(struct rmi_function *fn) if (error) { dev_err(&fn->dev, "Failed to write sleep mode: %d.\n", error); if (f01->old_nosleep) - f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT; + f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT; f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK; f01->device_control.ctrl0 |= RMI_SLEEP_MODE_NORMAL; return error; @@ -564,7 +564,7 @@ static int rmi_f01_resume(struct rmi_function *fn) int error; if (f01->old_nosleep) - f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT; + f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT; f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK; f01->device_control.ctrl0 |= RMI_SLEEP_MODE_NORMAL; diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c index ec8a10d..20c7134 100644 --- a/drivers/input/rmi4/rmi_f11.c +++ b/drivers/input/rmi4/rmi_f11.c @@ -530,8 +530,8 @@ static void rmi_f11_rel_pos_report(struct f11_data *f11, u8 n_finger) struct f11_2d_data *data = &f11->data; s8 x, y; - x = data->rel_pos[n_finger * 2]; - y = data->rel_pos[n_finger * 2 + 1]; + x = data->rel_pos[n_finger * RMI_F11_REL_BYTES]; + y = data->rel_pos[n_finger * RMI_F11_REL_BYTES + 1]; rmi_2d_sensor_rel_report(sensor, x, y); } @@ -1241,7 +1241,6 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits) struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f11_data *f11 = dev_get_drvdata(&fn->dev); u16 data_base_addr = fn->fd.data_base_addr; - u16 data_base_addr_offset = 0; int error; if (rmi_dev->xport->attn_data) { @@ -1251,8 +1250,7 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits) rmi_dev->xport->attn_size -= f11->sensor.attn_size; } else { error = rmi_read_block(rmi_dev, - data_base_addr + data_base_addr_offset, - f11->sensor.data_pkt, + data_base_addr, f11->sensor.data_pkt, f11->sensor.pkt_size); if (error < 0) return error; @@ -1260,7 +1258,6 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits) rmi_f11_finger_handler(f11, &f11->sensor, irq_bits, drvdata->num_of_irq_regs); - data_base_addr_offset += f11->sensor.pkt_size; return 0; } diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c index 88e9155..332c02f 100644 --- a/drivers/input/rmi4/rmi_f12.c +++ b/drivers/input/rmi4/rmi_f12.c @@ -27,7 +27,6 @@ enum rmi_f12_object_type { }; struct f12_data { - struct rmi_function *fn; struct rmi_2d_sensor sensor; struct rmi_2d_sensor_platform_data sensor_pdata; diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c index a96a326..6f2e0e4 100644 --- a/drivers/input/rmi4/rmi_i2c.c +++ b/drivers/input/rmi4/rmi_i2c.c @@ -11,6 +11,8 @@ #include <linux/rmi.h> #include <linux/irq.h> #include <linux/of.h> +#include <linux/delay.h> +#include <linux/regulator/consumer.h> #include "rmi_driver.h" #define BUFFER_SIZE_INCREMENT 32 @@ -37,6 +39,9 @@ struct rmi_i2c_xport { u8 *tx_buf; size_t tx_buf_size; + + struct regulator_bulk_data supplies[2]; + u32 startup_delay; }; #define RMI_PAGE_SELECT_REGISTER 0xff @@ -246,6 +251,24 @@ static int rmi_i2c_probe(struct i2c_client *client, return -ENODEV; } + rmi_i2c->supplies[0].supply = "vdd"; + rmi_i2c->supplies[1].supply = "vio"; + retval = devm_regulator_bulk_get(&client->dev, + ARRAY_SIZE(rmi_i2c->supplies), + rmi_i2c->supplies); + if (retval < 0) + return retval; + + retval = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies), + rmi_i2c->supplies); + if (retval < 0) + return retval; + + of_property_read_u32(client->dev.of_node, "syna,startup-delay-ms", + &rmi_i2c->startup_delay); + + msleep(rmi_i2c->startup_delay); + rmi_i2c->client = client; mutex_init(&rmi_i2c->page_mutex); @@ -286,6 +309,8 @@ static int rmi_i2c_remove(struct i2c_client *client) struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client); rmi_unregister_transport_device(&rmi_i2c->xport); + regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies), + rmi_i2c->supplies); return 0; } @@ -308,6 +333,10 @@ static int rmi_i2c_suspend(struct device *dev) dev_warn(dev, "Failed to enable irq for wake: %d\n", ret); } + + regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies), + rmi_i2c->supplies); + return ret; } @@ -317,6 +346,13 @@ static int rmi_i2c_resume(struct device *dev) struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client); int ret; + ret = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies), + rmi_i2c->supplies); + if (ret) + return ret; + + msleep(rmi_i2c->startup_delay); + enable_irq(rmi_i2c->irq); if (device_may_wakeup(&client->dev)) { ret = disable_irq_wake(rmi_i2c->irq); @@ -346,6 +382,9 @@ static int rmi_i2c_runtime_suspend(struct device *dev) disable_irq(rmi_i2c->irq); + regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies), + rmi_i2c->supplies); + return 0; } @@ -355,6 +394,13 @@ static int rmi_i2c_runtime_resume(struct device *dev) struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client); int ret; + ret = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies), + rmi_i2c->supplies); + if (ret) + return ret; + + msleep(rmi_i2c->startup_delay); + enable_irq(rmi_i2c->irq); ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev); diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 45887e3..3df501c 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -56,7 +56,7 @@ static int check_data(int data) /* it should be odd */ if (!(parity & 0x01)) { dev_warn(&ams_delta_serio->dev, - "paritiy check failed, data=0x%X parity=0x%X\n", + "parity check failed, data=0x%X parity=0x%X\n", data, parity); return SERIO_PARITY; } diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig index 623bb9e..a2b9f97 100644 --- a/drivers/input/tablet/Kconfig +++ b/drivers/input/tablet/Kconfig @@ -73,6 +73,21 @@ config TABLET_USB_KBTAB To compile this driver as a module, choose M here: the module will be called kbtab. +config TABLET_USB_PEGASUS + tristate "Pegasus Mobile Notetaker Pen input tablet support" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use the Pegasus Mobile Notetaker, + also known as: + Genie e-note The Notetaker, + Staedtler Digital ballpoint pen 990 01, + IRISnotes Express or + NEWLink Digital Note Taker. + + To compile this driver as a module, choose M here: the + module will be called pegasus_notetaker. + config TABLET_SERIAL_WACOM4 tristate "Wacom protocol 4 serial tablet support" select SERIO diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile index 2e13010..200fc4e 100644 --- a/drivers/input/tablet/Makefile +++ b/drivers/input/tablet/Makefile @@ -8,4 +8,5 @@ obj-$(CONFIG_TABLET_USB_AIPTEK) += aiptek.o obj-$(CONFIG_TABLET_USB_GTCO) += gtco.o obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o obj-$(CONFIG_TABLET_USB_KBTAB) += kbtab.o +obj-$(CONFIG_TABLET_USB_PEGASUS) += pegasus_notetaker.o obj-$(CONFIG_TABLET_SERIAL_WACOM4) += wacom_serial4.o diff --git a/drivers/input/tablet/pegasus_notetaker.c b/drivers/input/tablet/pegasus_notetaker.c new file mode 100644 index 0000000..949dacc --- /dev/null +++ b/drivers/input/tablet/pegasus_notetaker.c @@ -0,0 +1,450 @@ +/* + * Pegasus Mobile Notetaker Pen input tablet driver + * + * Copyright (c) 2016 Martin Kepplinger <martink@posteo.de> + */ + +/* + * request packet (control endpoint): + * |-------------------------------------| + * | Report ID | Nr of bytes | command | + * | (1 byte) | (1 byte) | (n bytes) | + * |-------------------------------------| + * | 0x02 | n | | + * |-------------------------------------| + * + * data packet after set xy mode command, 0x80 0xb5 0x02 0x01 + * and pen is in range: + * + * byte byte name value (bits) + * -------------------------------------------- + * 0 status 0 1 0 0 0 0 X X + * 1 color 0 0 0 0 H 0 S T + * 2 X low + * 3 X high + * 4 Y low + * 5 Y high + * + * X X battery state: + * no state reported 0x00 + * battery low 0x01 + * battery good 0x02 + * + * H Hovering + * S Switch 1 (pen button) + * T Tip + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/usb/input.h> +#include <linux/slab.h> + +/* USB HID defines */ +#define USB_REQ_GET_REPORT 0x01 +#define USB_REQ_SET_REPORT 0x09 + +#define USB_VENDOR_ID_PEGASUSTECH 0x0e20 +#define USB_DEVICE_ID_PEGASUS_NOTETAKER_EN100 0x0101 + +/* device specific defines */ +#define NOTETAKER_REPORT_ID 0x02 +#define NOTETAKER_SET_CMD 0x80 +#define NOTETAKER_SET_MODE 0xb5 + +#define NOTETAKER_LED_MOUSE 0x02 +#define PEN_MODE_XY 0x01 + +#define SPECIAL_COMMAND 0x80 +#define BUTTON_PRESSED 0xb5 +#define COMMAND_VERSION 0xa9 + +/* in xy data packet */ +#define BATTERY_NO_REPORT 0x40 +#define BATTERY_LOW 0x41 +#define BATTERY_GOOD 0x42 +#define PEN_BUTTON_PRESSED BIT(1) +#define PEN_TIP BIT(0) + +struct pegasus { + unsigned char *data; + u8 data_len; + dma_addr_t data_dma; + struct input_dev *dev; + struct usb_device *usbdev; + struct usb_interface *intf; + struct urb *irq; + char name[128]; + char phys[64]; + struct work_struct init; +}; + +static int pegasus_control_msg(struct pegasus *pegasus, u8 *data, int len) +{ + const int sizeof_buf = len + 2; + int result; + int error; + u8 *cmd_buf; + + cmd_buf = kmalloc(sizeof_buf, GFP_KERNEL); + if (!cmd_buf) + return -ENOMEM; + + cmd_buf[0] = NOTETAKER_REPORT_ID; + cmd_buf[1] = len; + memcpy(cmd_buf + 2, data, len); + + result = usb_control_msg(pegasus->usbdev, + usb_sndctrlpipe(pegasus->usbdev, 0), + USB_REQ_SET_REPORT, + USB_TYPE_VENDOR | USB_DIR_OUT, + 0, 0, cmd_buf, sizeof_buf, + USB_CTRL_SET_TIMEOUT); + + kfree(cmd_buf); + + if (unlikely(result != sizeof_buf)) { + error = result < 0 ? result : -EIO; + dev_err(&pegasus->usbdev->dev, "control msg error: %d\n", + error); + return error; + } + + return 0; +} + +static int pegasus_set_mode(struct pegasus *pegasus, u8 mode, u8 led) +{ + u8 cmd[] = { NOTETAKER_SET_CMD, NOTETAKER_SET_MODE, led, mode }; + + return pegasus_control_msg(pegasus, cmd, sizeof(cmd)); +} + +static void pegasus_parse_packet(struct pegasus *pegasus) +{ + unsigned char *data = pegasus->data; + struct input_dev *dev = pegasus->dev; + u16 x, y; + + switch (data[0]) { + case SPECIAL_COMMAND: + /* device button pressed */ + if (data[1] == BUTTON_PRESSED) + schedule_work(&pegasus->init); + + break; + + /* xy data */ + case BATTERY_LOW: + dev_warn_once(&dev->dev, "Pen battery low\n"); + /* fall through */ + + case BATTERY_NO_REPORT: + case BATTERY_GOOD: + x = le16_to_cpup((__le16 *)&data[2]); + y = le16_to_cpup((__le16 *)&data[4]); + + /* pen-up event */ + if (x == 0 && y == 0) + break; + + input_report_key(dev, BTN_TOUCH, data[1] & PEN_TIP); + input_report_key(dev, BTN_RIGHT, data[1] & PEN_BUTTON_PRESSED); + input_report_key(dev, BTN_TOOL_PEN, 1); + input_report_abs(dev, ABS_X, (s16)x); + input_report_abs(dev, ABS_Y, y); + + input_sync(dev); + break; + + default: + dev_warn_once(&pegasus->usbdev->dev, + "unknown answer from device\n"); + } +} + +static void pegasus_irq(struct urb *urb) +{ + struct pegasus *pegasus = urb->context; + struct usb_device *dev = pegasus->usbdev; + int retval; + + switch (urb->status) { + case 0: + pegasus_parse_packet(pegasus); + usb_mark_last_busy(pegasus->usbdev); + break; + + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + dev_err(&dev->dev, "%s - urb shutting down with status: %d", + __func__, urb->status); + return; + + default: + dev_err(&dev->dev, "%s - nonzero urb status received: %d", + __func__, urb->status); + break; + } + + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&dev->dev, "%s - usb_submit_urb failed with result %d", + __func__, retval); +} + +static void pegasus_init(struct work_struct *work) +{ + struct pegasus *pegasus = container_of(work, struct pegasus, init); + int error; + + error = pegasus_set_mode(pegasus, PEN_MODE_XY, NOTETAKER_LED_MOUSE); + if (error) + dev_err(&pegasus->usbdev->dev, "pegasus_set_mode error: %d\n", + error); +} + +static int pegasus_open(struct input_dev *dev) +{ + struct pegasus *pegasus = input_get_drvdata(dev); + int error; + + error = usb_autopm_get_interface(pegasus->intf); + if (error) + return error; + + pegasus->irq->dev = pegasus->usbdev; + if (usb_submit_urb(pegasus->irq, GFP_KERNEL)) { + error = -EIO; + goto err_autopm_put; + } + + error = pegasus_set_mode(pegasus, PEN_MODE_XY, NOTETAKER_LED_MOUSE); + if (error) + goto err_kill_urb; + + return 0; + +err_kill_urb: + usb_kill_urb(pegasus->irq); + cancel_work_sync(&pegasus->init); +err_autopm_put: + usb_autopm_put_interface(pegasus->intf); + return error; +} + +static void pegasus_close(struct input_dev *dev) +{ + struct pegasus *pegasus = input_get_drvdata(dev); + + usb_kill_urb(pegasus->irq); + cancel_work_sync(&pegasus->init); + usb_autopm_put_interface(pegasus->intf); +} + +static int pegasus_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *endpoint; + struct pegasus *pegasus; + struct input_dev *input_dev; + int error; + int pipe; + + /* We control interface 0 */ + if (intf->cur_altsetting->desc.bInterfaceNumber >= 1) + return -ENODEV; + + /* Sanity check that the device has an endpoint */ + if (intf->altsetting[0].desc.bNumEndpoints < 1) { + dev_err(&intf->dev, "Invalid number of endpoints\n"); + return -EINVAL; + } + + endpoint = &intf->cur_altsetting->endpoint[0].desc; + + pegasus = kzalloc(sizeof(*pegasus), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pegasus || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + pegasus->usbdev = dev; + pegasus->dev = input_dev; + pegasus->intf = intf; + + pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); + pegasus->data_len = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); + + pegasus->data = usb_alloc_coherent(dev, pegasus->data_len, GFP_KERNEL, + &pegasus->data_dma); + if (!pegasus->data) { + error = -ENOMEM; + goto err_free_mem; + } + + pegasus->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!pegasus->irq) { + error = -ENOMEM; + goto err_free_dma; + } + + usb_fill_int_urb(pegasus->irq, dev, pipe, + pegasus->data, pegasus->data_len, + pegasus_irq, pegasus, endpoint->bInterval); + + pegasus->irq->transfer_dma = pegasus->data_dma; + pegasus->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + if (dev->manufacturer) + strlcpy(pegasus->name, dev->manufacturer, + sizeof(pegasus->name)); + + if (dev->product) { + if (dev->manufacturer) + strlcat(pegasus->name, " ", sizeof(pegasus->name)); + strlcat(pegasus->name, dev->product, sizeof(pegasus->name)); + } + + if (!strlen(pegasus->name)) + snprintf(pegasus->name, sizeof(pegasus->name), + "USB Pegasus Device %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + + usb_make_path(dev, pegasus->phys, sizeof(pegasus->phys)); + strlcat(pegasus->phys, "/input0", sizeof(pegasus->phys)); + + INIT_WORK(&pegasus->init, pegasus_init); + + usb_set_intfdata(intf, pegasus); + + input_dev->name = pegasus->name; + input_dev->phys = pegasus->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, pegasus); + + input_dev->open = pegasus_open; + input_dev->close = pegasus_close; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + + __set_bit(BTN_TOUCH, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + __set_bit(BTN_TOOL_PEN, input_dev->keybit); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + + input_set_abs_params(input_dev, ABS_X, -1500, 1500, 8, 0); + input_set_abs_params(input_dev, ABS_Y, 1600, 3000, 8, 0); + + error = input_register_device(pegasus->dev); + if (error) + goto err_free_urb; + + return 0; + +err_free_urb: + usb_free_urb(pegasus->irq); +err_free_dma: + usb_free_coherent(dev, pegasus->data_len, + pegasus->data, pegasus->data_dma); +err_free_mem: + input_free_device(input_dev); + kfree(pegasus); + usb_set_intfdata(intf, NULL); + + return error; +} + +static void pegasus_disconnect(struct usb_interface *intf) +{ + struct pegasus *pegasus = usb_get_intfdata(intf); + + input_unregister_device(pegasus->dev); + + usb_free_urb(pegasus->irq); + usb_free_coherent(interface_to_usbdev(intf), + pegasus->data_len, pegasus->data, + pegasus->data_dma); + + kfree(pegasus); + usb_set_intfdata(intf, NULL); +} + +static int pegasus_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct pegasus *pegasus = usb_get_intfdata(intf); + + mutex_lock(&pegasus->dev->mutex); + usb_kill_urb(pegasus->irq); + cancel_work_sync(&pegasus->init); + mutex_unlock(&pegasus->dev->mutex); + + return 0; +} + +static int pegasus_resume(struct usb_interface *intf) +{ + struct pegasus *pegasus = usb_get_intfdata(intf); + int retval = 0; + + mutex_lock(&pegasus->dev->mutex); + if (pegasus->dev->users && usb_submit_urb(pegasus->irq, GFP_NOIO) < 0) + retval = -EIO; + mutex_unlock(&pegasus->dev->mutex); + + return retval; +} + +static int pegasus_reset_resume(struct usb_interface *intf) +{ + struct pegasus *pegasus = usb_get_intfdata(intf); + int retval = 0; + + mutex_lock(&pegasus->dev->mutex); + if (pegasus->dev->users) { + retval = pegasus_set_mode(pegasus, PEN_MODE_XY, + NOTETAKER_LED_MOUSE); + if (!retval && usb_submit_urb(pegasus->irq, GFP_NOIO) < 0) + retval = -EIO; + } + mutex_unlock(&pegasus->dev->mutex); + + return retval; +} + +static const struct usb_device_id pegasus_ids[] = { + { USB_DEVICE(USB_VENDOR_ID_PEGASUSTECH, + USB_DEVICE_ID_PEGASUS_NOTETAKER_EN100) }, + { } +}; +MODULE_DEVICE_TABLE(usb, pegasus_ids); + +static struct usb_driver pegasus_driver = { + .name = "pegasus_notetaker", + .probe = pegasus_probe, + .disconnect = pegasus_disconnect, + .suspend = pegasus_suspend, + .resume = pegasus_resume, + .reset_resume = pegasus_reset_resume, + .id_table = pegasus_ids, + .supports_autosuspend = 1, +}; + +module_usb_driver(pegasus_driver); + +MODULE_AUTHOR("Martin Kepplinger <martink@posteo.de>"); +MODULE_DESCRIPTION("Pegasus Mobile Notetaker Pen tablet driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 8ecdc38..ee02dc7 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -632,7 +632,7 @@ config TOUCHSCREEN_EDT_FT5X06 config TOUCHSCREEN_MIGOR tristate "Renesas MIGO-R touchscreen" - depends on SH_MIGOR && I2C + depends on (SH_MIGOR || COMPILE_TEST) && I2C help Say Y here to enable MIGO-R touchscreen support. @@ -1046,6 +1046,19 @@ config TOUCHSCREEN_PCAP To compile this driver as a module, choose M here: the module will be called pcap_ts. +config TOUCHSCREEN_RM_TS + tristate "Raydium I2C Touchscreen" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + help + Say Y here if you have Raydium series I2C touchscreen, + such as RM32380, connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called raydium_i2c_ts. + config TOUCHSCREEN_ST1232 tristate "Sitronix ST1232 touchscreen controllers" depends on I2C @@ -1094,6 +1107,19 @@ config TOUCHSCREEN_SUR40 To compile this driver as a module, choose M here: the module will be called sur40. +config TOUCHSCREEN_SURFACE3_SPI + tristate "Ntrig/Microsoft Surface 3 SPI touchscreen" + depends on SPI + depends on GPIOLIB || COMPILE_TEST + help + Say Y here if you have the Ntrig/Microsoft SPI touchscreen + controller chip as found on the Surface 3 in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called surface3_spi. + config TOUCHSCREEN_SX8654 tristate "Semtech SX8654 touchscreen" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index f42975e..3315882 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -62,11 +62,13 @@ obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o +obj-$(CONFIG_TOUCHSCREEN_RM_TS) += raydium_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o obj-$(CONFIG_TOUCHSCREEN_SUN4I) += sun4i-ts.o obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o +obj-$(CONFIG_TOUCHSCREEN_SURFACE3_SPI) += surface3_spi.o obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index e4bf110..e16a446 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -595,7 +595,7 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, } else { input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); - touchscreen_parse_properties(input_dev, false); + touchscreen_parse_properties(input_dev, false, NULL); if (!input_abs_get_max(input_dev, ABS_PRESSURE)) { dev_err(dev, "Touchscreen pressure is not specified\n"); return ERR_PTR(-EINVAL); diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c index 22a6fea..0bf1406 100644 --- a/drivers/input/touchscreen/chipone_icn8318.c +++ b/drivers/input/touchscreen/chipone_icn8318.c @@ -17,6 +17,7 @@ #include <linux/i2c.h> #include <linux/input.h> #include <linux/input/mt.h> +#include <linux/input/touchscreen.h> #include <linux/module.h> #include <linux/of.h> @@ -52,11 +53,7 @@ struct icn8318_data { struct i2c_client *client; struct input_dev *input; struct gpio_desc *wake_gpio; - u32 max_x; - u32 max_y; - bool invert_x; - bool invert_y; - bool swap_x_y; + struct touchscreen_properties prop; }; static int icn8318_read_touch_data(struct i2c_client *client, @@ -91,7 +88,7 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id) struct icn8318_data *data = dev_id; struct device *dev = &data->client->dev; struct icn8318_touch_data touch_data; - int i, ret, x, y; + int i, ret; ret = icn8318_read_touch_data(data->client, &touch_data); if (ret < 0) { @@ -124,22 +121,9 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id) if (!act) continue; - x = be16_to_cpu(touch->x); - y = be16_to_cpu(touch->y); - - if (data->invert_x) - x = data->max_x - x; - - if (data->invert_y) - y = data->max_y - y; - - if (!data->swap_x_y) { - input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x); - input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y); - } else { - input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y); - input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x); - } + touchscreen_report_pos(data->input, &data->prop, + be16_to_cpu(touch->x), + be16_to_cpu(touch->y), true); } input_mt_sync_frame(data->input); @@ -200,10 +184,8 @@ static int icn8318_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; - struct device_node *np = dev->of_node; struct icn8318_data *data; struct input_dev *input; - u32 fuzz_x = 0, fuzz_y = 0; int error; if (!client->irq) { @@ -223,19 +205,6 @@ static int icn8318_probe(struct i2c_client *client, return error; } - if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) || - of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) { - dev_err(dev, "Error touchscreen-size-x and/or -y missing\n"); - return -EINVAL; - } - - /* Optional */ - of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x); - of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y); - data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x"); - data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y"); - data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y"); - input = devm_input_allocate_device(dev); if (!input) return -ENOMEM; @@ -246,16 +215,14 @@ static int icn8318_probe(struct i2c_client *client, input->close = icn8318_stop; input->dev.parent = dev; - if (!data->swap_x_y) { - input_set_abs_params(input, ABS_MT_POSITION_X, 0, - data->max_x, fuzz_x, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, - data->max_y, fuzz_y, 0); - } else { - input_set_abs_params(input, ABS_MT_POSITION_X, 0, - data->max_y, fuzz_y, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, - data->max_x, fuzz_x, 0); + input_set_capability(input, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y); + + touchscreen_parse_properties(input, true, &data->prop); + if (!input_abs_get_max(input, ABS_MT_POSITION_X) || + !input_abs_get_max(input, ABS_MT_POSITION_Y)) { + dev_err(dev, "Error touchscreen-size-x and/or -y missing\n"); + return -EINVAL; } error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES, diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c index 91cda8f..79381cc 100644 --- a/drivers/input/touchscreen/cyttsp_core.c +++ b/drivers/input/touchscreen/cyttsp_core.c @@ -657,7 +657,7 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); - touchscreen_parse_properties(input_dev, true); + touchscreen_parse_properties(input_dev, true, NULL); error = input_mt_init_slots(input_dev, CY_MAX_ID, 0); if (error) { diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 23fbe38..703e295 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -86,6 +86,7 @@ struct edt_reg_addr { struct edt_ft5x06_ts_data { struct i2c_client *client; struct input_dev *input; + struct touchscreen_properties prop; u16 num_x; u16 num_y; @@ -246,8 +247,8 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) if (!down) continue; - input_report_abs(tsdata->input, ABS_MT_POSITION_X, x); - input_report_abs(tsdata->input, ABS_MT_POSITION_Y, y); + touchscreen_report_pos(tsdata->input, &tsdata->prop, x, y, + true); } input_mt_report_pointer_emulation(tsdata->input, true); @@ -972,7 +973,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, input_set_abs_params(input, ABS_MT_POSITION_Y, 0, tsdata->num_y * 64 - 1, 0, 0); - touchscreen_parse_properties(input, true); + touchscreen_parse_properties(input, true, &tsdata->prop); error = input_mt_init_slots(input, tsdata->max_support_points, INPUT_MT_DIRECT); diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c index c038db9..02fb119 100644 --- a/drivers/input/touchscreen/migor_ts.c +++ b/drivers/input/touchscreen/migor_ts.c @@ -202,7 +202,7 @@ static int migor_ts_remove(struct i2c_client *client) return 0; } -static int migor_ts_suspend(struct device *dev) +static int __maybe_unused migor_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct migor_ts_priv *priv = i2c_get_clientdata(client); @@ -213,7 +213,7 @@ static int migor_ts_suspend(struct device *dev) return 0; } -static int migor_ts_resume(struct device *dev) +static int __maybe_unused migor_ts_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct migor_ts_priv *priv = i2c_get_clientdata(client); @@ -230,7 +230,7 @@ static const struct i2c_device_id migor_ts_id[] = { { "migor_ts", 0 }, { } }; -MODULE_DEVICE_TABLE(i2c, migor_ts); +MODULE_DEVICE_TABLE(i2c, migor_ts_id); static struct i2c_driver migor_ts_driver = { .driver = { diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c index bb6f2fe..8d7f9c8 100644 --- a/drivers/input/touchscreen/of_touchscreen.c +++ b/drivers/input/touchscreen/of_touchscreen.c @@ -55,12 +55,16 @@ static void touchscreen_set_params(struct input_dev *dev, * @input: input device that should be parsed * @multitouch: specifies whether parsed properties should be applied to * single-touch or multi-touch axes + * @prop: pointer to a struct touchscreen_properties into which to store + * axis swap and invert info for use with touchscreen_report_x_y(); + * or %NULL * * This function parses common DT properties for touchscreens and setups the * input device accordingly. The function keeps previously set up default * values if no value is specified via DT. */ -void touchscreen_parse_properties(struct input_dev *input, bool multitouch) +void touchscreen_parse_properties(struct input_dev *input, bool multitouch, + struct touchscreen_properties *prop) { struct device *dev = input->dev.parent; unsigned int axis; @@ -104,5 +108,80 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch) &fuzz); if (data_present) touchscreen_set_params(input, axis, maximum, fuzz); + + if (!prop) + return; + + axis = multitouch ? ABS_MT_POSITION_X : ABS_X; + + prop->max_x = input_abs_get_max(input, axis); + prop->max_y = input_abs_get_max(input, axis + 1); + prop->invert_x = + device_property_read_bool(dev, "touchscreen-inverted-x"); + prop->invert_y = + device_property_read_bool(dev, "touchscreen-inverted-y"); + prop->swap_x_y = + device_property_read_bool(dev, "touchscreen-swapped-x-y"); + + if (prop->swap_x_y) + swap(input->absinfo[axis], input->absinfo[axis + 1]); } EXPORT_SYMBOL(touchscreen_parse_properties); + +static void +touchscreen_apply_prop_to_x_y(const struct touchscreen_properties *prop, + unsigned int *x, unsigned int *y) +{ + if (prop->invert_x) + *x = prop->max_x - *x; + + if (prop->invert_y) + *y = prop->max_y - *y; + + if (prop->swap_x_y) + swap(*x, *y); +} + +/** + * touchscreen_set_mt_pos - Set input_mt_pos coordinates + * @pos: input_mt_pos to set coordinates of + * @prop: pointer to a struct touchscreen_properties + * @x: X coordinate to store in pos + * @y: Y coordinate to store in pos + * + * Adjust the passed in x and y values applying any axis inversion and + * swapping requested in the passed in touchscreen_properties and store + * the result in a struct input_mt_pos. + */ +void touchscreen_set_mt_pos(struct input_mt_pos *pos, + const struct touchscreen_properties *prop, + unsigned int x, unsigned int y) +{ + touchscreen_apply_prop_to_x_y(prop, &x, &y); + pos->x = x; + pos->y = y; +} +EXPORT_SYMBOL(touchscreen_set_mt_pos); + +/** + * touchscreen_report_pos - Report touchscreen coordinates + * @input: input_device to report coordinates for + * @prop: pointer to a struct touchscreen_properties + * @x: X coordinate to report + * @y: Y coordinate to report + * @multitouch: Report coordinates on single-touch or multi-touch axes + * + * Adjust the passed in x and y values applying any axis inversion and + * swapping requested in the passed in touchscreen_properties and then + * report the resulting coordinates on the input_dev's x and y axis. + */ +void touchscreen_report_pos(struct input_dev *input, + const struct touchscreen_properties *prop, + unsigned int x, unsigned int y, + bool multitouch) +{ + touchscreen_apply_prop_to_x_y(prop, &x, &y); + input_report_abs(input, multitouch ? ABS_MT_POSITION_X : ABS_X, x); + input_report_abs(input, multitouch ? ABS_MT_POSITION_Y : ABS_Y, y); +} +EXPORT_SYMBOL(touchscreen_report_pos); diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 09523a3..d159e14 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -27,9 +27,9 @@ #include <linux/input/touchscreen.h> #include <linux/gpio.h> #include <linux/gpio/consumer.h> -/*#include <linux/of.h>*/ #include <linux/of_device.h> #include <linux/platform_data/pixcir_i2c_ts.h> +#include <asm/unaligned.h> #define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */ @@ -41,19 +41,15 @@ struct pixcir_i2c_ts_data { struct gpio_desc *gpio_enable; struct gpio_desc *gpio_wake; const struct pixcir_i2c_chip_data *chip; + struct touchscreen_properties prop; int max_fingers; /* Max fingers supported in this instance */ bool running; }; -struct pixcir_touch { - int x; - int y; - int id; -}; - struct pixcir_report_data { int num_touches; - struct pixcir_touch touches[PIXCIR_MAX_SLOTS]; + struct input_mt_pos pos[PIXCIR_MAX_SLOTS]; + int ids[PIXCIR_MAX_SLOTS]; }; static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, @@ -98,11 +94,11 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, bufptr = &rdbuf[2]; for (i = 0; i < touch; i++) { - report->touches[i].x = (bufptr[1] << 8) | bufptr[0]; - report->touches[i].y = (bufptr[3] << 8) | bufptr[2]; - + touchscreen_set_mt_pos(&report->pos[i], &tsdata->prop, + get_unaligned_le16(bufptr), + get_unaligned_le16(bufptr + 2)); if (chip->has_hw_ids) { - report->touches[i].id = bufptr[4]; + report->ids[i] = bufptr[4]; bufptr = bufptr + 5; } else { bufptr = bufptr + 4; @@ -113,9 +109,7 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, struct pixcir_report_data *report) { - struct input_mt_pos pos[PIXCIR_MAX_SLOTS]; int slots[PIXCIR_MAX_SLOTS]; - struct pixcir_touch *touch; int n, i, slot; struct device *dev = &ts->client->dev; const struct pixcir_i2c_chip_data *chip = ts->chip; @@ -124,24 +118,16 @@ static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, if (n > PIXCIR_MAX_SLOTS) n = PIXCIR_MAX_SLOTS; - if (!ts->chip->has_hw_ids) { - for (i = 0; i < n; i++) { - touch = &report->touches[i]; - pos[i].x = touch->x; - pos[i].y = touch->y; - } - - input_mt_assign_slots(ts->input, slots, pos, n, 0); - } + if (!ts->chip->has_hw_ids) + input_mt_assign_slots(ts->input, slots, report->pos, n, 0); for (i = 0; i < n; i++) { - touch = &report->touches[i]; - if (chip->has_hw_ids) { - slot = input_mt_get_slot_by_key(ts->input, touch->id); + slot = input_mt_get_slot_by_key(ts->input, + report->ids[i]); if (slot < 0) { dev_dbg(dev, "no free slot for id 0x%x\n", - touch->id); + report->ids[i]); continue; } } else { @@ -149,14 +135,15 @@ static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, } input_mt_slot(ts->input, slot); - input_mt_report_slot_state(ts->input, - MT_TOOL_FINGER, true); + input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true); - input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x); - input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y); + input_report_abs(ts->input, ABS_MT_POSITION_X, + report->pos[i].x); + input_report_abs(ts->input, ABS_MT_POSITION_Y, + report->pos[i].y); dev_dbg(dev, "%d: slot %d, x %d, y %d\n", - i, slot, touch->x, touch->y); + i, slot, report->pos[i].x, report->pos[i].y); } input_mt_sync_frame(ts->input); @@ -515,7 +502,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, } else { input_set_capability(input, EV_ABS, ABS_MT_POSITION_X); input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y); - touchscreen_parse_properties(input, true); + touchscreen_parse_properties(input, true, &tsdata->prop); if (!input_abs_get_max(input, ABS_MT_POSITION_X) || !input_abs_get_max(input, ABS_MT_POSITION_Y)) { dev_err(dev, "Touchscreen size is not specified\n"); diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c new file mode 100644 index 0000000..a99fb5c --- /dev/null +++ b/drivers/input/touchscreen/raydium_i2c_ts.c @@ -0,0 +1,1238 @@ +/* + * Raydium touchscreen I2C driver. + * + * Copyright (C) 2012-2014, Raydium Semiconductor Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Raydium reserves the right to make changes without further notice + * to the materials described herein. Raydium does not assume any + * liability arising out of the application described herein. + * + * Contact Raydium Semiconductor Corporation at www.rad-ic.com + */ + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <asm/unaligned.h> + +/* Slave I2C mode */ +#define RM_BOOT_BLDR 0x02 +#define RM_BOOT_MAIN 0x03 + +/* I2C bootoloader commands */ +#define RM_CMD_BOOT_PAGE_WRT 0x0B /* send bl page write */ +#define RM_CMD_BOOT_WRT 0x11 /* send bl write */ +#define RM_CMD_BOOT_ACK 0x22 /* send ack*/ +#define RM_CMD_BOOT_CHK 0x33 /* send data check */ +#define RM_CMD_BOOT_READ 0x44 /* send wait bl data ready*/ + +#define RM_BOOT_RDY 0xFF /* bl data ready */ + +/* I2C main commands */ +#define RM_CMD_QUERY_BANK 0x2B +#define RM_CMD_DATA_BANK 0x4D +#define RM_CMD_ENTER_SLEEP 0x4E +#define RM_CMD_BANK_SWITCH 0xAA + +#define RM_RESET_MSG_ADDR 0x40000004 + +#define RM_MAX_READ_SIZE 56 +#define RM_PACKET_CRC_SIZE 2 + +/* Touch relative info */ +#define RM_MAX_RETRIES 3 +#define RM_MAX_TOUCH_NUM 10 +#define RM_BOOT_DELAY_MS 100 + +/* Offsets in contact data */ +#define RM_CONTACT_STATE_POS 0 +#define RM_CONTACT_X_POS 1 +#define RM_CONTACT_Y_POS 3 +#define RM_CONTACT_PRESSURE_POS 5 +#define RM_CONTACT_WIDTH_X_POS 6 +#define RM_CONTACT_WIDTH_Y_POS 7 + +/* Bootloader relative info */ +#define RM_BL_WRT_CMD_SIZE 3 /* bl flash wrt cmd size */ +#define RM_BL_WRT_PKG_SIZE 32 /* bl wrt pkg size */ +#define RM_BL_WRT_LEN (RM_BL_WRT_PKG_SIZE + RM_BL_WRT_CMD_SIZE) +#define RM_FW_PAGE_SIZE 128 +#define RM_MAX_FW_RETRIES 30 +#define RM_MAX_FW_SIZE 0xD000 + +#define RM_POWERON_DELAY_USEC 500 +#define RM_RESET_DELAY_MSEC 50 + +enum raydium_bl_cmd { + BL_HEADER = 0, + BL_PAGE_STR, + BL_PKG_IDX, + BL_DATA_STR, +}; + +enum raydium_bl_ack { + RAYDIUM_ACK_NULL = 0, + RAYDIUM_WAIT_READY, + RAYDIUM_PATH_READY, +}; + +enum raydium_boot_mode { + RAYDIUM_TS_MAIN = 0, + RAYDIUM_TS_BLDR, +}; + +/* Response to RM_CMD_DATA_BANK request */ +struct raydium_data_info { + __le32 data_bank_addr; + u8 pkg_size; + u8 tp_info_size; +}; + +struct raydium_info { + __le32 hw_ver; /*device version */ + u8 main_ver; + u8 sub_ver; + __le16 ft_ver; /* test version */ + u8 x_num; + u8 y_num; + __le16 x_max; + __le16 y_max; + u8 x_res; /* units/mm */ + u8 y_res; /* units/mm */ +}; + +/* struct raydium_data - represents state of Raydium touchscreen device */ +struct raydium_data { + struct i2c_client *client; + struct input_dev *input; + + struct regulator *avdd; + struct regulator *vccio; + struct gpio_desc *reset_gpio; + + struct raydium_info info; + + struct mutex sysfs_mutex; + + u8 *report_data; + + u32 data_bank_addr; + u8 report_size; + u8 contact_size; + u8 pkg_size; + + enum raydium_boot_mode boot_mode; + + bool wake_irq_enabled; +}; + +static int raydium_i2c_send(struct i2c_client *client, + u8 addr, const void *data, size_t len) +{ + u8 *buf; + int tries = 0; + int ret; + + buf = kmalloc(len + 1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = addr; + memcpy(buf + 1, data, len); + + do { + ret = i2c_master_send(client, buf, len + 1); + if (likely(ret == len + 1)) + break; + + msleep(20); + } while (++tries < RM_MAX_RETRIES); + + kfree(buf); + + if (unlikely(ret != len + 1)) { + if (ret >= 0) + ret = -EIO; + dev_err(&client->dev, "%s failed: %d\n", __func__, ret); + return ret; + } + + return 0; +} + +static int raydium_i2c_read(struct i2c_client *client, + u8 addr, void *data, size_t len) +{ + struct i2c_msg xfer[] = { + { + .addr = client->addr, + .len = 1, + .buf = &addr, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = data, + } + }; + int ret; + + ret = i2c_transfer(client->adapter, xfer, ARRAY_SIZE(xfer)); + if (unlikely(ret != ARRAY_SIZE(xfer))) + return ret < 0 ? ret : -EIO; + + return 0; +} + +static int raydium_i2c_read_message(struct i2c_client *client, + u32 addr, void *data, size_t len) +{ + __be32 be_addr; + size_t xfer_len; + int error; + + while (len) { + xfer_len = min_t(size_t, len, RM_MAX_READ_SIZE); + + be_addr = cpu_to_be32(addr); + + error = raydium_i2c_send(client, RM_CMD_BANK_SWITCH, + &be_addr, sizeof(be_addr)); + if (!error) + error = raydium_i2c_read(client, addr & 0xff, + data, xfer_len); + if (error) + return error; + + len -= xfer_len; + data += xfer_len; + addr += xfer_len; + } + + return 0; +} + +static int raydium_i2c_send_message(struct i2c_client *client, + u32 addr, const void *data, size_t len) +{ + __be32 be_addr = cpu_to_be32(addr); + int error; + + error = raydium_i2c_send(client, RM_CMD_BANK_SWITCH, + &be_addr, sizeof(be_addr)); + if (!error) + error = raydium_i2c_send(client, addr & 0xff, data, len); + + return error; +} + +static int raydium_i2c_sw_reset(struct i2c_client *client) +{ + const u8 soft_rst_cmd = 0x01; + int error; + + error = raydium_i2c_send_message(client, RM_RESET_MSG_ADDR, + &soft_rst_cmd, sizeof(soft_rst_cmd)); + if (error) { + dev_err(&client->dev, "software reset failed: %d\n", error); + return error; + } + + msleep(RM_RESET_DELAY_MSEC); + + return 0; +} + +static int raydium_i2c_query_ts_info(struct raydium_data *ts) +{ + struct i2c_client *client = ts->client; + struct raydium_data_info data_info; + __le32 query_bank_addr; + + int error, retry_cnt; + + for (retry_cnt = 0; retry_cnt < RM_MAX_RETRIES; retry_cnt++) { + error = raydium_i2c_read(client, RM_CMD_DATA_BANK, + &data_info, sizeof(data_info)); + if (error) + continue; + + /* + * Warn user if we already allocated memory for reports and + * then the size changed (due to firmware update?) and keep + * old size instead. + */ + if (ts->report_data && ts->pkg_size != data_info.pkg_size) { + dev_warn(&client->dev, + "report size changes, was: %d, new: %d\n", + ts->pkg_size, data_info.pkg_size); + } else { + ts->pkg_size = data_info.pkg_size; + ts->report_size = ts->pkg_size - RM_PACKET_CRC_SIZE; + } + + ts->contact_size = data_info.tp_info_size; + ts->data_bank_addr = le32_to_cpu(data_info.data_bank_addr); + + dev_dbg(&client->dev, + "data_bank_addr: %#08x, report_size: %d, contact_size: %d\n", + ts->data_bank_addr, ts->report_size, ts->contact_size); + + error = raydium_i2c_read(client, RM_CMD_QUERY_BANK, + &query_bank_addr, + sizeof(query_bank_addr)); + if (error) + continue; + + error = raydium_i2c_read_message(client, + le32_to_cpu(query_bank_addr), + &ts->info, sizeof(ts->info)); + if (error) + continue; + + return 0; + } + + dev_err(&client->dev, "failed to query device parameters: %d\n", error); + return error; +} + +static int raydium_i2c_check_fw_status(struct raydium_data *ts) +{ + struct i2c_client *client = ts->client; + static const u8 bl_ack = 0x62; + static const u8 main_ack = 0x66; + u8 buf[4]; + int error; + + error = raydium_i2c_read(client, RM_CMD_BOOT_READ, buf, sizeof(buf)); + if (!error) { + if (buf[0] == bl_ack) + ts->boot_mode = RAYDIUM_TS_BLDR; + else if (buf[0] == main_ack) + ts->boot_mode = RAYDIUM_TS_MAIN; + return 0; + } + + return error; +} + +static int raydium_i2c_initialize(struct raydium_data *ts) +{ + struct i2c_client *client = ts->client; + int error, retry_cnt; + + for (retry_cnt = 0; retry_cnt < RM_MAX_RETRIES; retry_cnt++) { + /* Wait for Hello packet */ + msleep(RM_BOOT_DELAY_MS); + + error = raydium_i2c_check_fw_status(ts); + if (error) { + dev_err(&client->dev, + "failed to read 'hello' packet: %d\n", error); + continue; + } + + if (ts->boot_mode == RAYDIUM_TS_BLDR || + ts->boot_mode == RAYDIUM_TS_MAIN) { + break; + } + } + + if (error) + ts->boot_mode = RAYDIUM_TS_BLDR; + + if (ts->boot_mode == RAYDIUM_TS_BLDR) { + ts->info.hw_ver = cpu_to_le32(0xffffffffUL); + ts->info.main_ver = 0xff; + ts->info.sub_ver = 0xff; + } else { + raydium_i2c_query_ts_info(ts); + } + + return error; +} + +static int raydium_i2c_bl_chk_state(struct i2c_client *client, + enum raydium_bl_ack state) +{ + static const u8 ack_ok[] = { 0xFF, 0x39, 0x30, 0x30, 0x54 }; + u8 rbuf[sizeof(ack_ok)]; + u8 retry; + int error; + + for (retry = 0; retry < RM_MAX_FW_RETRIES; retry++) { + switch (state) { + case RAYDIUM_ACK_NULL: + return 0; + + case RAYDIUM_WAIT_READY: + error = raydium_i2c_read(client, RM_CMD_BOOT_CHK, + &rbuf[0], 1); + if (!error && rbuf[0] == RM_BOOT_RDY) + return 0; + + break; + + case RAYDIUM_PATH_READY: + error = raydium_i2c_read(client, RM_CMD_BOOT_CHK, + rbuf, sizeof(rbuf)); + if (!error && !memcmp(rbuf, ack_ok, sizeof(ack_ok))) + return 0; + + break; + + default: + dev_err(&client->dev, "%s: invalid target state %d\n", + __func__, state); + return -EINVAL; + } + + msleep(20); + } + + return -ETIMEDOUT; +} + +static int raydium_i2c_write_object(struct i2c_client *client, + const void *data, size_t len, + enum raydium_bl_ack state) +{ + int error; + + error = raydium_i2c_send(client, RM_CMD_BOOT_WRT, data, len); + if (error) { + dev_err(&client->dev, "WRT obj command failed: %d\n", + error); + return error; + } + + error = raydium_i2c_send(client, RM_CMD_BOOT_ACK, NULL, 0); + if (error) { + dev_err(&client->dev, "Ack obj command failed: %d\n", error); + return error; + } + + error = raydium_i2c_bl_chk_state(client, state); + if (error) { + dev_err(&client->dev, "BL check state failed: %d\n", error); + return error; + } + return 0; +} + +static bool raydium_i2c_boot_trigger(struct i2c_client *client) +{ + static const u8 cmd[7][6] = { + { 0x08, 0x0C, 0x09, 0x00, 0x50, 0xD7 }, + { 0x08, 0x04, 0x09, 0x00, 0x50, 0xA5 }, + { 0x08, 0x04, 0x09, 0x00, 0x50, 0x00 }, + { 0x08, 0x04, 0x09, 0x00, 0x50, 0xA5 }, + { 0x08, 0x0C, 0x09, 0x00, 0x50, 0x00 }, + { 0x06, 0x01, 0x00, 0x00, 0x00, 0x00 }, + { 0x02, 0xA2, 0x00, 0x00, 0x00, 0x00 }, + }; + int i; + int error; + + for (i = 0; i < 7; i++) { + error = raydium_i2c_write_object(client, cmd[i], sizeof(cmd[i]), + RAYDIUM_WAIT_READY); + if (error) { + dev_err(&client->dev, + "boot trigger failed at step %d: %d\n", + i, error); + return error; + } + } + + return 0; +} + +static bool raydium_i2c_fw_trigger(struct i2c_client *client) +{ + static const u8 cmd[5][11] = { + { 0, 0x09, 0x71, 0x0C, 0x09, 0x00, 0x50, 0xD7, 0, 0, 0 }, + { 0, 0x09, 0x71, 0x04, 0x09, 0x00, 0x50, 0xA5, 0, 0, 0 }, + { 0, 0x09, 0x71, 0x04, 0x09, 0x00, 0x50, 0x00, 0, 0, 0 }, + { 0, 0x09, 0x71, 0x04, 0x09, 0x00, 0x50, 0xA5, 0, 0, 0 }, + { 0, 0x09, 0x71, 0x0C, 0x09, 0x00, 0x50, 0x00, 0, 0, 0 }, + }; + int i; + int error; + + for (i = 0; i < 5; i++) { + error = raydium_i2c_write_object(client, cmd[i], sizeof(cmd[i]), + RAYDIUM_ACK_NULL); + if (error) { + dev_err(&client->dev, + "fw trigger failed at step %d: %d\n", + i, error); + return error; + } + } + + return 0; +} + +static int raydium_i2c_check_path(struct i2c_client *client) +{ + static const u8 cmd[] = { 0x09, 0x00, 0x09, 0x00, 0x50, 0x10, 0x00 }; + int error; + + error = raydium_i2c_write_object(client, cmd, sizeof(cmd), + RAYDIUM_PATH_READY); + if (error) { + dev_err(&client->dev, "check path command failed: %d\n", error); + return error; + } + + return 0; +} + +static int raydium_i2c_enter_bl(struct i2c_client *client) +{ + static const u8 cal_cmd[] = { 0x00, 0x01, 0x52 }; + int error; + + error = raydium_i2c_write_object(client, cal_cmd, sizeof(cal_cmd), + RAYDIUM_ACK_NULL); + if (error) { + dev_err(&client->dev, "enter bl command failed: %d\n", error); + return error; + } + + msleep(RM_BOOT_DELAY_MS); + return 0; +} + +static int raydium_i2c_leave_bl(struct i2c_client *client) +{ + static const u8 leave_cmd[] = { 0x05, 0x00 }; + int error; + + error = raydium_i2c_write_object(client, leave_cmd, sizeof(leave_cmd), + RAYDIUM_ACK_NULL); + if (error) { + dev_err(&client->dev, "leave bl command failed: %d\n", error); + return error; + } + + msleep(RM_BOOT_DELAY_MS); + return 0; +} + +static int raydium_i2c_write_checksum(struct i2c_client *client, + size_t length, u16 checksum) +{ + u8 checksum_cmd[] = { 0x00, 0x05, 0x6D, 0x00, 0x00, 0x00, 0x00 }; + int error; + + put_unaligned_le16(length, &checksum_cmd[3]); + put_unaligned_le16(checksum, &checksum_cmd[5]); + + error = raydium_i2c_write_object(client, + checksum_cmd, sizeof(checksum_cmd), + RAYDIUM_ACK_NULL); + if (error) { + dev_err(&client->dev, "failed to write checksum: %d\n", + error); + return error; + } + + return 0; +} + +static int raydium_i2c_disable_watch_dog(struct i2c_client *client) +{ + static const u8 cmd[] = { 0x0A, 0xAA }; + int error; + + error = raydium_i2c_write_object(client, cmd, sizeof(cmd), + RAYDIUM_WAIT_READY); + if (error) { + dev_err(&client->dev, "disable watchdog command failed: %d\n", + error); + return error; + } + + return 0; +} + +static int raydium_i2c_fw_write_page(struct i2c_client *client, + u16 page_idx, const void *data, size_t len) +{ + u8 buf[RM_BL_WRT_LEN]; + size_t xfer_len; + int error; + int i; + + BUILD_BUG_ON((RM_FW_PAGE_SIZE % RM_BL_WRT_PKG_SIZE) != 0); + + for (i = 0; i < RM_FW_PAGE_SIZE / RM_BL_WRT_PKG_SIZE; i++) { + buf[BL_HEADER] = RM_CMD_BOOT_PAGE_WRT; + buf[BL_PAGE_STR] = page_idx ? 0xff : 0; + buf[BL_PKG_IDX] = i + 1; + + xfer_len = min_t(size_t, len, RM_BL_WRT_PKG_SIZE); + memcpy(&buf[BL_DATA_STR], data, xfer_len); + if (len < RM_BL_WRT_PKG_SIZE) + memset(&buf[BL_DATA_STR + xfer_len], 0xff, + RM_BL_WRT_PKG_SIZE - xfer_len); + + error = raydium_i2c_write_object(client, buf, RM_BL_WRT_LEN, + RAYDIUM_WAIT_READY); + if (error) { + dev_err(&client->dev, + "page write command failed for page %d, chunk %d: %d\n", + page_idx, i, error); + return error; + } + + data += xfer_len; + len -= xfer_len; + } + + return error; +} + +static u16 raydium_calc_chksum(const u8 *buf, u16 len) +{ + u16 checksum = 0; + u16 i; + + for (i = 0; i < len; i++) + checksum += buf[i]; + + return checksum; +} + +static int raydium_i2c_do_update_firmware(struct raydium_data *ts, + const struct firmware *fw) +{ + struct i2c_client *client = ts->client; + const void *data; + size_t data_len; + size_t len; + int page_nr; + int i; + int error; + u16 fw_checksum; + + if (fw->size == 0 || fw->size > RM_MAX_FW_SIZE) { + dev_err(&client->dev, "Invalid firmware length\n"); + return -EINVAL; + } + + error = raydium_i2c_check_fw_status(ts); + if (error) { + dev_err(&client->dev, "Unable to access IC %d\n", error); + return error; + } + + if (ts->boot_mode == RAYDIUM_TS_MAIN) { + for (i = 0; i < RM_MAX_RETRIES; i++) { + error = raydium_i2c_enter_bl(client); + if (!error) { + error = raydium_i2c_check_fw_status(ts); + if (error) { + dev_err(&client->dev, + "unable to access IC: %d\n", + error); + return error; + } + + if (ts->boot_mode == RAYDIUM_TS_BLDR) + break; + } + } + + if (ts->boot_mode == RAYDIUM_TS_MAIN) { + dev_err(&client->dev, + "failied to jump to boot loader: %d\n", + error); + return -EIO; + } + } + + error = raydium_i2c_disable_watch_dog(client); + if (error) + return error; + + error = raydium_i2c_check_path(client); + if (error) + return error; + + error = raydium_i2c_boot_trigger(client); + if (error) { + dev_err(&client->dev, "send boot trigger fail: %d\n", error); + return error; + } + + msleep(RM_BOOT_DELAY_MS); + + data = fw->data; + data_len = fw->size; + page_nr = 0; + + while (data_len) { + len = min_t(size_t, data_len, RM_FW_PAGE_SIZE); + + error = raydium_i2c_fw_write_page(client, page_nr++, data, len); + if (error) + return error; + + msleep(20); + + data += len; + data_len -= len; + } + + error = raydium_i2c_leave_bl(client); + if (error) { + dev_err(&client->dev, + "failed to leave boot loader: %d\n", error); + return error; + } + + dev_dbg(&client->dev, "left boot loader mode\n"); + msleep(RM_BOOT_DELAY_MS); + + error = raydium_i2c_check_fw_status(ts); + if (error) { + dev_err(&client->dev, + "failed to check fw status after write: %d\n", + error); + return error; + } + + if (ts->boot_mode != RAYDIUM_TS_MAIN) { + dev_err(&client->dev, + "failed to switch to main fw after writing firmware: %d\n", + error); + return -EINVAL; + } + + error = raydium_i2c_fw_trigger(client); + if (error) { + dev_err(&client->dev, "failed to trigger fw: %d\n", error); + return error; + } + + fw_checksum = raydium_calc_chksum(fw->data, fw->size); + + error = raydium_i2c_write_checksum(client, fw->size, fw_checksum); + if (error) + return error; + + return 0; +} + +static int raydium_i2c_fw_update(struct raydium_data *ts) +{ + struct i2c_client *client = ts->client; + const struct firmware *fw = NULL; + const char *fw_file = "raydium.fw"; + int error; + + error = request_firmware(&fw, fw_file, &client->dev); + if (error) { + dev_err(&client->dev, "Unable to open firmware %s\n", fw_file); + return error; + } + + disable_irq(client->irq); + + error = raydium_i2c_do_update_firmware(ts, fw); + if (error) { + dev_err(&client->dev, "firmware update failed: %d\n", error); + ts->boot_mode = RAYDIUM_TS_BLDR; + goto out_enable_irq; + } + + error = raydium_i2c_initialize(ts); + if (error) { + dev_err(&client->dev, + "failed to initialize device after firmware update: %d\n", + error); + ts->boot_mode = RAYDIUM_TS_BLDR; + goto out_enable_irq; + } + + ts->boot_mode = RAYDIUM_TS_MAIN; + +out_enable_irq: + enable_irq(client->irq); + msleep(100); + + release_firmware(fw); + + return error; +} + +static void raydium_mt_event(struct raydium_data *ts) +{ + int i; + + for (i = 0; i < ts->report_size / ts->contact_size; i++) { + u8 *contact = &ts->report_data[ts->contact_size * i]; + bool state = contact[RM_CONTACT_STATE_POS]; + u8 wx, wy; + + input_mt_slot(ts->input, i); + input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, state); + + if (!state) + continue; + + input_report_abs(ts->input, ABS_MT_POSITION_X, + get_unaligned_le16(&contact[RM_CONTACT_X_POS])); + input_report_abs(ts->input, ABS_MT_POSITION_Y, + get_unaligned_le16(&contact[RM_CONTACT_Y_POS])); + input_report_abs(ts->input, ABS_MT_PRESSURE, + contact[RM_CONTACT_PRESSURE_POS]); + + wx = contact[RM_CONTACT_WIDTH_X_POS]; + wy = contact[RM_CONTACT_WIDTH_Y_POS]; + + input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, max(wx, wy)); + input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, min(wx, wy)); + } + + input_mt_sync_frame(ts->input); + input_sync(ts->input); +} + +static irqreturn_t raydium_i2c_irq(int irq, void *_dev) +{ + struct raydium_data *ts = _dev; + int error; + u16 fw_crc; + u16 calc_crc; + + if (ts->boot_mode != RAYDIUM_TS_MAIN) + goto out; + + error = raydium_i2c_read_message(ts->client, ts->data_bank_addr, + ts->report_data, ts->pkg_size); + if (error) + goto out; + + fw_crc = get_unaligned_le16(&ts->report_data[ts->report_size]); + calc_crc = raydium_calc_chksum(ts->report_data, ts->report_size); + if (unlikely(fw_crc != calc_crc)) { + dev_warn(&ts->client->dev, + "%s: invalid packet crc %#04x vs %#04x\n", + __func__, calc_crc, fw_crc); + goto out; + } + + raydium_mt_event(ts); + +out: + return IRQ_HANDLED; +} + +static ssize_t raydium_i2c_fw_ver_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct raydium_data *ts = i2c_get_clientdata(client); + + return sprintf(buf, "%d.%d\n", ts->info.main_ver, ts->info.sub_ver); +} + +static ssize_t raydium_i2c_hw_ver_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct raydium_data *ts = i2c_get_clientdata(client); + + return sprintf(buf, "%#04x\n", le32_to_cpu(ts->info.hw_ver)); +} + +static ssize_t raydium_i2c_boot_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct raydium_data *ts = i2c_get_clientdata(client); + + return sprintf(buf, "%s\n", + ts->boot_mode == RAYDIUM_TS_MAIN ? + "Normal" : "Recovery"); +} + +static ssize_t raydium_i2c_update_fw_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct raydium_data *ts = i2c_get_clientdata(client); + int error; + + error = mutex_lock_interruptible(&ts->sysfs_mutex); + if (error) + return error; + + error = raydium_i2c_fw_update(ts); + + mutex_unlock(&ts->sysfs_mutex); + + return error ?: count; +} + +static ssize_t raydium_i2c_calibrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct raydium_data *ts = i2c_get_clientdata(client); + static const u8 cal_cmd[] = { 0x00, 0x01, 0x9E }; + int error; + + error = mutex_lock_interruptible(&ts->sysfs_mutex); + if (error) + return error; + + error = raydium_i2c_write_object(client, cal_cmd, sizeof(cal_cmd), + RAYDIUM_WAIT_READY); + if (error) + dev_err(&client->dev, "calibrate command failed: %d\n", error); + + mutex_unlock(&ts->sysfs_mutex); + return error ?: count; +} + +static DEVICE_ATTR(fw_version, S_IRUGO, raydium_i2c_fw_ver_show, NULL); +static DEVICE_ATTR(hw_version, S_IRUGO, raydium_i2c_hw_ver_show, NULL); +static DEVICE_ATTR(boot_mode, S_IRUGO, raydium_i2c_boot_mode_show, NULL); +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, raydium_i2c_update_fw_store); +static DEVICE_ATTR(calibrate, S_IWUSR, NULL, raydium_i2c_calibrate_store); + +static struct attribute *raydium_i2c_attributes[] = { + &dev_attr_update_fw.attr, + &dev_attr_boot_mode.attr, + &dev_attr_fw_version.attr, + &dev_attr_hw_version.attr, + &dev_attr_calibrate.attr, + NULL +}; + +static struct attribute_group raydium_i2c_attribute_group = { + .attrs = raydium_i2c_attributes, +}; + +static void raydium_i2c_remove_sysfs_group(void *_data) +{ + struct raydium_data *ts = _data; + + sysfs_remove_group(&ts->client->dev.kobj, &raydium_i2c_attribute_group); +} + +static int raydium_i2c_power_on(struct raydium_data *ts) +{ + int error; + + if (!ts->reset_gpio) + return 0; + + gpiod_set_value_cansleep(ts->reset_gpio, 1); + + error = regulator_enable(ts->avdd); + if (error) { + dev_err(&ts->client->dev, + "failed to enable avdd regulator: %d\n", error); + goto release_reset_gpio; + } + + error = regulator_enable(ts->vccio); + if (error) { + regulator_disable(ts->avdd); + dev_err(&ts->client->dev, + "failed to enable vccio regulator: %d\n", error); + goto release_reset_gpio; + } + + udelay(RM_POWERON_DELAY_USEC); + +release_reset_gpio: + gpiod_set_value_cansleep(ts->reset_gpio, 0); + + if (error) + return error; + + msleep(RM_RESET_DELAY_MSEC); + + return 0; +} + +static void raydium_i2c_power_off(void *_data) +{ + struct raydium_data *ts = _data; + + if (ts->reset_gpio) { + gpiod_set_value_cansleep(ts->reset_gpio, 1); + regulator_disable(ts->vccio); + regulator_disable(ts->avdd); + } +} + +static int raydium_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + union i2c_smbus_data dummy; + struct raydium_data *ts; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, + "i2c check functionality error (need I2C_FUNC_I2C)\n"); + return -ENXIO; + } + + ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + mutex_init(&ts->sysfs_mutex); + + ts->client = client; + i2c_set_clientdata(client, ts); + + ts->avdd = devm_regulator_get(&client->dev, "avdd"); + if (IS_ERR(ts->avdd)) { + error = PTR_ERR(ts->avdd); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "Failed to get 'avdd' regulator: %d\n", error); + return error; + } + + ts->vccio = devm_regulator_get(&client->dev, "vccio"); + if (IS_ERR(ts->vccio)) { + error = PTR_ERR(ts->vccio); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "Failed to get 'vccio' regulator: %d\n", error); + return error; + } + + ts->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(ts->reset_gpio)) { + error = PTR_ERR(ts->reset_gpio); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "failed to get reset gpio: %d\n", error); + return error; + } + + error = raydium_i2c_power_on(ts); + if (error) + return error; + + error = devm_add_action(&client->dev, raydium_i2c_power_off, ts); + if (error) { + dev_err(&client->dev, + "failed to install power off action: %d\n", error); + raydium_i2c_power_off(ts); + return error; + } + + /* Make sure there is something at this address */ + if (i2c_smbus_xfer(client->adapter, client->addr, 0, + I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) { + dev_err(&client->dev, "nothing at this address\n"); + return -ENXIO; + } + + error = raydium_i2c_initialize(ts); + if (error) { + dev_err(&client->dev, "failed to initialize: %d\n", error); + return error; + } + + ts->report_data = devm_kmalloc(&client->dev, + ts->pkg_size, GFP_KERNEL); + if (!ts->report_data) + return -ENOMEM; + + ts->input = devm_input_allocate_device(&client->dev); + if (!ts->input) { + dev_err(&client->dev, "Failed to allocate input device\n"); + return -ENOMEM; + } + + ts->input->name = "Raydium Touchscreen"; + ts->input->id.bustype = BUS_I2C; + + input_set_drvdata(ts->input, ts); + + input_set_abs_params(ts->input, ABS_MT_POSITION_X, + 0, le16_to_cpu(ts->info.x_max), 0, 0); + input_set_abs_params(ts->input, ABS_MT_POSITION_Y, + 0, le16_to_cpu(ts->info.y_max), 0, 0); + input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->info.x_res); + input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->info.y_res); + + input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0); + + error = input_mt_init_slots(ts->input, RM_MAX_TOUCH_NUM, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(&client->dev, + "failed to initialize MT slots: %d\n", error); + return error; + } + + error = input_register_device(ts->input); + if (error) { + dev_err(&client->dev, + "unable to register input device: %d\n", error); + return error; + } + + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, raydium_i2c_irq, + IRQF_ONESHOT, client->name, ts); + if (error) { + dev_err(&client->dev, "Failed to register interrupt\n"); + return error; + } + + error = sysfs_create_group(&client->dev.kobj, + &raydium_i2c_attribute_group); + if (error) { + dev_err(&client->dev, "failed to create sysfs attributes: %d\n", + error); + return error; + } + + error = devm_add_action(&client->dev, + raydium_i2c_remove_sysfs_group, ts); + if (error) { + raydium_i2c_remove_sysfs_group(ts); + dev_err(&client->dev, + "Failed to add sysfs cleanup action: %d\n", error); + return error; + } + + return 0; +} + +static void __maybe_unused raydium_enter_sleep(struct i2c_client *client) +{ + static const u8 sleep_cmd[] = { 0x5A, 0xff, 0x00, 0x0f }; + int error; + + error = raydium_i2c_send(client, RM_CMD_ENTER_SLEEP, + sleep_cmd, sizeof(sleep_cmd)); + if (error) + dev_err(&client->dev, + "sleep command failed: %d\n", error); +} + +static int __maybe_unused raydium_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct raydium_data *ts = i2c_get_clientdata(client); + + /* Sleep is not available in BLDR recovery mode */ + if (ts->boot_mode != RAYDIUM_TS_MAIN) + return -EBUSY; + + disable_irq(client->irq); + + if (device_may_wakeup(dev)) { + raydium_enter_sleep(client); + + ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0); + } else { + raydium_i2c_power_off(ts); + } + + return 0; +} + +static int __maybe_unused raydium_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct raydium_data *ts = i2c_get_clientdata(client); + + if (device_may_wakeup(dev)) { + if (ts->wake_irq_enabled) + disable_irq_wake(client->irq); + raydium_i2c_sw_reset(client); + } else { + raydium_i2c_power_on(ts); + raydium_i2c_initialize(ts); + } + + enable_irq(client->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(raydium_i2c_pm_ops, + raydium_i2c_suspend, raydium_i2c_resume); + +static const struct i2c_device_id raydium_i2c_id[] = { + { "raydium_i2c" , 0 }, + { "rm32380", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, raydium_i2c_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id raydium_acpi_id[] = { + { "RAYD0001", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(acpi, raydium_acpi_id); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id raydium_of_match[] = { + { .compatible = "raydium,rm32380", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, raydium_of_match); +#endif + +static struct i2c_driver raydium_i2c_driver = { + .probe = raydium_i2c_probe, + .id_table = raydium_i2c_id, + .driver = { + .name = "raydium_ts", + .pm = &raydium_i2c_pm_ops, + .acpi_match_table = ACPI_PTR(raydium_acpi_id), + .of_match_table = of_match_ptr(raydium_of_match), + }, +}; +module_i2c_driver(raydium_i2c_driver); + +MODULE_AUTHOR("Raydium"); +MODULE_DESCRIPTION("Raydium I2c Touchscreen driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c new file mode 100644 index 0000000..e12fb9b --- /dev/null +++ b/drivers/input/touchscreen/surface3_spi.c @@ -0,0 +1,427 @@ +/* + * Driver for Ntrig/Microsoft Touchscreens over SPI + * + * Copyright (c) 2016 Red Hat Inc. + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#include <linux/kernel.h> + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/acpi.h> + +#include <asm/unaligned.h> + +#define SURFACE3_PACKET_SIZE 264 + +#define SURFACE3_REPORT_TOUCH 0xd2 +#define SURFACE3_REPORT_PEN 0x16 + +struct surface3_ts_data { + struct spi_device *spi; + struct gpio_desc *gpiod_rst[2]; + struct input_dev *input_dev; + struct input_dev *pen_input_dev; + int pen_tool; + + u8 rd_buf[SURFACE3_PACKET_SIZE] ____cacheline_aligned; +}; + +struct surface3_ts_data_finger { + u8 status; + __le16 tracking_id; + __le16 x; + __le16 cx; + __le16 y; + __le16 cy; + __le16 width; + __le16 height; + u32 padding; +} __packed; + +struct surface3_ts_data_pen { + u8 status; + __le16 x; + __le16 y; + __le16 pressure; + u8 padding; +} __packed; + +static int surface3_spi_read(struct surface3_ts_data *ts_data) +{ + struct spi_device *spi = ts_data->spi; + + memset(ts_data->rd_buf, 0, sizeof(ts_data->rd_buf)); + return spi_read(spi, ts_data->rd_buf, sizeof(ts_data->rd_buf)); +} + +static void surface3_spi_report_touch(struct surface3_ts_data *ts_data, + struct surface3_ts_data_finger *finger) +{ + int st = finger->status & 0x01; + int slot; + + slot = input_mt_get_slot_by_key(ts_data->input_dev, + get_unaligned_le16(&finger->tracking_id)); + if (slot < 0) + return; + + input_mt_slot(ts_data->input_dev, slot); + input_mt_report_slot_state(ts_data->input_dev, MT_TOOL_FINGER, st); + if (st) { + input_report_abs(ts_data->input_dev, + ABS_MT_POSITION_X, + get_unaligned_le16(&finger->x)); + input_report_abs(ts_data->input_dev, + ABS_MT_POSITION_Y, + get_unaligned_le16(&finger->y)); + input_report_abs(ts_data->input_dev, + ABS_MT_WIDTH_MAJOR, + get_unaligned_le16(&finger->width)); + input_report_abs(ts_data->input_dev, + ABS_MT_WIDTH_MINOR, + get_unaligned_le16(&finger->height)); + } +} + +static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *data) +{ + u16 timestamp; + unsigned int i; + timestamp = get_unaligned_le16(&data[15]); + + for (i = 0; i < 13; i++) { + struct surface3_ts_data_finger *finger; + + finger = (struct surface3_ts_data_finger *)&data[17 + + i * sizeof(struct surface3_ts_data_finger)]; + + /* + * When bit 5 of status is 1, it marks the end of the report: + * - touch present: 0xe7 + * - touch released: 0xe4 + * - nothing valuable: 0xff + */ + if (finger->status & 0x10) + break; + + surface3_spi_report_touch(ts_data, finger); + } + + input_mt_sync_frame(ts_data->input_dev); + input_sync(ts_data->input_dev); +} + +static void surface3_spi_report_pen(struct surface3_ts_data *ts_data, + struct surface3_ts_data_pen *pen) +{ + struct input_dev *dev = ts_data->pen_input_dev; + int st = pen->status; + int prox = st & 0x01; + int rubber = st & 0x18; + int tool = (prox && rubber) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + + /* fake proximity out to switch tools */ + if (ts_data->pen_tool != tool) { + input_report_key(dev, ts_data->pen_tool, 0); + input_sync(dev); + ts_data->pen_tool = tool; + } + + input_report_key(dev, BTN_TOUCH, st & 0x12); + + input_report_key(dev, ts_data->pen_tool, prox); + + if (st) { + input_report_key(dev, + BTN_STYLUS, + st & 0x04); + + input_report_abs(dev, + ABS_X, + get_unaligned_le16(&pen->x)); + input_report_abs(dev, + ABS_Y, + get_unaligned_le16(&pen->y)); + input_report_abs(dev, + ABS_PRESSURE, + get_unaligned_le16(&pen->pressure)); + } +} + +static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data) +{ + struct surface3_ts_data_pen *pen; + + pen = (struct surface3_ts_data_pen *)&data[15]; + + surface3_spi_report_pen(ts_data, pen); + input_sync(ts_data->pen_input_dev); +} + +static void surface3_spi_process(struct surface3_ts_data *ts_data) +{ + const char header[] = { + 0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01 + }; + u8 *data = ts_data->rd_buf; + + if (memcmp(header, data, sizeof(header))) + dev_err(&ts_data->spi->dev, + "%s header error: %*ph, ignoring...\n", + __func__, (int)sizeof(header), data); + + switch (data[9]) { + case SURFACE3_REPORT_TOUCH: + surface3_spi_process_touch(ts_data, data); + break; + case SURFACE3_REPORT_PEN: + surface3_spi_process_pen(ts_data, data); + break; + default: + dev_err(&ts_data->spi->dev, + "%s unknown packet type: %x, ignoring...\n", + __func__, data[9]); + break; + } +} + +static irqreturn_t surface3_spi_irq_handler(int irq, void *dev_id) +{ + struct surface3_ts_data *data = dev_id; + + if (surface3_spi_read(data)) + return IRQ_HANDLED; + + dev_dbg(&data->spi->dev, "%s received -> %*ph\n", + __func__, SURFACE3_PACKET_SIZE, data->rd_buf); + surface3_spi_process(data); + + return IRQ_HANDLED; +} + +static void surface3_spi_power(struct surface3_ts_data *data, bool on) +{ + gpiod_set_value(data->gpiod_rst[0], on); + gpiod_set_value(data->gpiod_rst[1], on); + /* let the device settle a little */ + msleep(20); +} + +/** + * surface3_spi_get_gpio_config - Get GPIO config from ACPI/DT + * + * @ts: surface3_spi_ts_data pointer + */ +static int surface3_spi_get_gpio_config(struct surface3_ts_data *data) +{ + int error; + struct device *dev; + struct gpio_desc *gpiod; + int i; + + dev = &data->spi->dev; + + /* Get the reset lines GPIO pin number */ + for (i = 0; i < 2; i++) { + gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_OUT_LOW); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_err(dev, + "Failed to get power GPIO %d: %d\n", + i, + error); + return error; + } + + data->gpiod_rst[i] = gpiod; + } + + return 0; +} + +static int surface3_spi_create_touch_input(struct surface3_ts_data *data) +{ + struct input_dev *input; + int error; + + input = devm_input_allocate_device(&data->spi->dev); + if (!input) + return -ENOMEM; + + data->input_dev = input; + + input_set_abs_params(input, ABS_MT_POSITION_X, 0, 9600, 0, 0); + input_abs_set_res(input, ABS_MT_POSITION_X, 40); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 7200, 0, 0); + input_abs_set_res(input, ABS_MT_POSITION_Y, 48); + input_set_abs_params(input, ABS_MT_WIDTH_MAJOR, 0, 1024, 0, 0); + input_set_abs_params(input, ABS_MT_WIDTH_MINOR, 0, 1024, 0, 0); + input_mt_init_slots(input, 10, INPUT_MT_DIRECT); + + input->name = "Surface3 SPI Capacitive TouchScreen"; + input->phys = "input/ts"; + input->id.bustype = BUS_SPI; + input->id.vendor = 0x045e; /* Microsoft */ + input->id.product = 0x0001; + input->id.version = 0x0000; + + error = input_register_device(input); + if (error) { + dev_err(&data->spi->dev, + "Failed to register input device: %d", error); + return error; + } + + return 0; +} + +static int surface3_spi_create_pen_input(struct surface3_ts_data *data) +{ + struct input_dev *input; + int error; + + input = devm_input_allocate_device(&data->spi->dev); + if (!input) + return -ENOMEM; + + data->pen_input_dev = input; + data->pen_tool = BTN_TOOL_PEN; + + __set_bit(INPUT_PROP_DIRECT, input->propbit); + __set_bit(INPUT_PROP_POINTER, input->propbit); + input_set_abs_params(input, ABS_X, 0, 9600, 0, 0); + input_abs_set_res(input, ABS_X, 40); + input_set_abs_params(input, ABS_Y, 0, 7200, 0, 0); + input_abs_set_res(input, ABS_Y, 48); + input_set_abs_params(input, ABS_PRESSURE, 0, 1024, 0, 0); + input_set_capability(input, EV_KEY, BTN_TOUCH); + input_set_capability(input, EV_KEY, BTN_STYLUS); + input_set_capability(input, EV_KEY, BTN_TOOL_PEN); + input_set_capability(input, EV_KEY, BTN_TOOL_RUBBER); + + input->name = "Surface3 SPI Pen Input"; + input->phys = "input/ts"; + input->id.bustype = BUS_SPI; + input->id.vendor = 0x045e; /* Microsoft */ + input->id.product = 0x0002; + input->id.version = 0x0000; + + error = input_register_device(input); + if (error) { + dev_err(&data->spi->dev, + "Failed to register input device: %d", error); + return error; + } + + return 0; +} + +static int surface3_spi_probe(struct spi_device *spi) +{ + struct surface3_ts_data *data; + int error; + + /* Set up SPI*/ + spi->bits_per_word = 8; + spi->mode = SPI_MODE_0; + error = spi_setup(spi); + if (error) + return error; + + data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->spi = spi; + spi_set_drvdata(spi, data); + + error = surface3_spi_get_gpio_config(data); + if (error) + return error; + + surface3_spi_power(data, true); + surface3_spi_power(data, false); + surface3_spi_power(data, true); + + error = surface3_spi_create_touch_input(data); + if (error) + return error; + + error = surface3_spi_create_pen_input(data); + if (error) + return error; + + error = devm_request_threaded_irq(&spi->dev, spi->irq, + NULL, surface3_spi_irq_handler, + IRQF_ONESHOT, + "Surface3-irq", data); + if (error) + return error; + + return 0; +} + +static int __maybe_unused surface3_spi_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct surface3_ts_data *data = spi_get_drvdata(spi); + + disable_irq(data->spi->irq); + + surface3_spi_power(data, false); + + return 0; +} + +static int __maybe_unused surface3_spi_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct surface3_ts_data *data = spi_get_drvdata(spi); + + surface3_spi_power(data, true); + + enable_irq(data->spi->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(surface3_spi_pm_ops, + surface3_spi_suspend, + surface3_spi_resume); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id surface3_spi_acpi_match[] = { + { "MSHW0037", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, surface3_spi_acpi_match); +#endif + +static struct spi_driver surface3_spi_driver = { + .driver = { + .name = "Surface3-spi", + .acpi_match_table = ACPI_PTR(surface3_spi_acpi_match), + .pm = &surface3_spi_pm_ops, + }, + .probe = surface3_spi_probe, +}; + +module_spi_driver(surface3_spi_driver); + +MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>"); +MODULE_DESCRIPTION("Surface 3 SPI touchscreen driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 8b3f15c..7953381 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -406,7 +406,7 @@ static int titsc_probe(struct platform_device *pdev) int err; /* Allocate memory for device */ - ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL); + ts_dev = kzalloc(sizeof(*ts_dev), GFP_KERNEL); input_dev = input_allocate_device(); if (!ts_dev || !input_dev) { dev_err(&pdev->dev, "failed to allocate memory.\n"); diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c index dfa7f1c..b7059ed 100644 --- a/drivers/input/touchscreen/tsc200x-core.c +++ b/drivers/input/touchscreen/tsc200x-core.c @@ -568,7 +568,7 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id, input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0); if (np) - touchscreen_parse_properties(input_dev, false); + touchscreen_parse_properties(input_dev, false, NULL); input_dev->open = tsc200x_open; input_dev->close = tsc200x_close; diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index b6fc4bd..85e9572 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -518,13 +518,21 @@ static int w8001_setup_touch(struct w8001 *w8001, char *basename, w8001->pktlen = W8001_PKTLEN_TOUCH2FG; __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); - input_mt_init_slots(dev, 2, 0); + error = input_mt_init_slots(dev, 2, 0); + if (error) { + dev_err(&w8001->serio->dev, + "failed to initialize MT slots: %d\n", error); + return error; + } + input_set_abs_params(dev, ABS_MT_POSITION_X, 0, touch.x, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, touch.y, 0, 0); input_set_abs_params(dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); + input_abs_set_res(dev, ABS_MT_POSITION_X, touch.panel_res); + input_abs_set_res(dev, ABS_MT_POSITION_Y, touch.panel_res); strlcat(basename, " 2FG", basename_sz); if (w8001->max_pen_x && w8001->max_pen_y) |